| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| ... | |
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
mlxsw needs to distinguish nexthops with a gateway from connected
nexthops in order to write the former to the adjacency table of the
device. The check used to rely on the fact that nexthops with a gateway
have a 'link' scope whereas connected nexthops have a 'host' scope. This
is no longer correct after commit 747c14307214 ("ip: fix dflt addr
selection for connected nexthop").
Fix that by instead checking the address family of the gateway IP. This
is a more direct way and also consistent with the IPv6 counterpart in
mlxsw_sp_rt6_is_gateway().
Cc: stable@vger.kernel.org
Fixes: 747c14307214 ("ip: fix dflt addr selection for connected nexthop")
Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
While reading these knobs, they can be changed concurrently.
Thus, we need to add READ_ONCE() to their readers.
- tcp_sack
- tcp_window_scaling
- tcp_timestamps
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
While reading sysctl_fib_multipath_hash_fields, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: ce5c9c20d364 ("ipv4: Add a sysctl to control multipath hash fields")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | |/ / / / / / / /
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
While reading sysctl_fib_multipath_hash_policy, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: bf4e0a3db97e ("net: ipv4: add support for ECMP hash policy choice")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | |\ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-18
This series contains updates to iavf driver only.
Przemyslaw fixes handling of multiple VLAN requests to account for
individual errors instead of rejecting them all. He removes incorrect
implementations of ETHTOOL_COALESCE_MAX_FRAMES and
ETHTOOL_COALESCE_MAX_FRAMES_IRQ.
He also corrects an issue with NULL pointer caused by improper handling of
dummy receive descriptors. Finally, he corrects debug prints reporting an
unknown state.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix missing state logs
iavf: Fix handling of dummy receive descriptors
iavf: Disallow changing rx/tx-frames and rx/tx-frames-irq
iavf: Fix VLAN_V2 addition/rejection
====================
Link: https://lore.kernel.org/r/20220718174807.4113582-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Fix debug prints, by adding missing state prints.
Extend iavf_state_str by strings for __IAVF_INIT_EXTENDED_CAPS and
__IAVF_INIT_CONFIG_ADAPTER.
Without this patch, when enabling debug prints for iavf.h, user will
see:
iavf 0000:06:0e.0: state transition from:__IAVF_INIT_GET_RESOURCES to:__IAVF_UNKNOWN_STATE
iavf 0000:06:0e.0: state transition from:__IAVF_UNKNOWN_STATE to:__IAVF_UNKNOWN_STATE
Fixes: 605ca7c5c670 ("iavf: Fix kernel BUG in free_msi_irqs")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Fix memory leak caused by not handling dummy receive descriptor properly.
iavf_get_rx_buffer now sets the rx_buffer return value for dummy receive
descriptors. Without this patch, when the hardware writes a dummy
descriptor, iavf would not free the page allocated for the previous receive
buffer. This is an unlikely event but can still happen.
[Jesse: massaged commit message]
Fixes: efa14c398582 ("iavf: allow null RX descriptors")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Remove from supported_coalesce_params ETHTOOL_COALESCE_MAX_FRAMES
and ETHTOOL_COALESCE_MAX_FRAMES_IRQ. As tx-frames-irq allowed
user to change budget for iavf_clean_tx_irq, remove work_limit
and use define for budget.
Without this patch there would be possibility to change rx/tx-frames
and rx/tx-frames-irq, which for rx/tx-frames did nothing, while for
rx/tx-frames-irq it changed rx/tx-frames and only changed budget
for cleaning NAPI poll.
Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Fix VLAN addition, so that PF driver does not reject whole VLAN batch.
Add VLAN reject handling, so rejected VLANs, won't litter VLAN filter
list. Fix handling of active_(c/s)vlans, so it will be possible to
re-add VLAN filters for user.
Without this patch, after changing trust to off, with VLAN filters
saturated, no VLAN is added, due to PF rejecting addition.
Fixes: 92fc50859872 ("iavf: Restrict maximum VLAN filters for VIRTCHNL_VF_OFFLOAD_VLAN_V2")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
mtk_flow_get_wdma_info
odev pointer can be NULL in mtk_flow_offload_replace routine according
to the flower action rules. Fix possible NULL pointer dereference in
mtk_flow_get_wdma_info.
Fixes: a333215e10cb5 ("net: ethernet: mtk_eth_soc: implement flow offloading to WED devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/4e1685bc4976e21e364055f6bee86261f8f9ee93.1658137753.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
This fixes that the platform is waked by an unexpected packet. The
size and range of FIFO is different when the device enters S3 state,
so it is necessary to correct some settings when suspending.
Regardless of jumbo frame, set RMS to 1522 and MTPS to MTPS_DEFAULT.
Besides, enable MCU_BORW_EN to update the method of calculating the
pointer of data. Then, the hardware could get the correct data.
Fixes: 195aae321c82 ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://lore.kernel.org/r/20220718082120.10957-391-nic_swsd@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
amt->nr_tunnels is protected by amt->lock.
But, amt_request_handler() has been using this variable without the
amt->lock.
So, it expands context of amt->lock in the amt_request_handler() to
protect amt->nr_tunnels variable.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
AMT gateway interface should not receive unexpected multicast data.
Multicast data message type should be received after sending an update
message, which means all establishment between gateway and relay is
finished.
So, amt_multicast_data_handler() checks amt->status.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
AMT gateway interface should not receive unexpected query messages.
In order to drop unexpected query messages, it checks nonce.
And it also checks ready4 and ready6 variables to drop duplicated messages.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
AMT gateway interface should not receive unexpected advertisement messages.
In order to drop these packets, it should check nonce and amt->status.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
When AMT gateway starts sending a new request message, it should
regenerate the nonce variable.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
There are some data races in the amt module.
amt->ready4, amt->ready6, and amt->status can be accessed concurrently
without locks.
So, it uses READ_ONCE() and WRITE_ONCE().
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
By the previous patch, amt gateway handlers are changed to worked by
a single thread.
So, most locks for gateway are not needed.
So, it removes.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
There are some synchronization issues(amt->status, amt->req_cnt, etc)
if the interface is in gateway mode because gateway message handlers
are processed concurrently.
This applies a work queue for processing these messages instead of
expanding the locking context.
So, the purposes of this patch are to fix exist race conditions and to make
gateway to be able to validate a gateway status more correctly.
When the AMT gateway interface is created, it tries to establish to relay.
The establishment step looks stateless, but it should be managed well.
In order to handle messages in the gateway, it saves the current
status(i.e. AMT_STATUS_XXX).
This patch makes gateway code to be worked with a single thread.
Now, all messages except the multicast are triggered(received or
delay expired), and these messages will be stored in the event
queue(amt->events).
Then, the single worker processes stored messages asynchronously one
by one.
The multicast data message type will be still processed immediately.
Now, amt->lock is only needed to access the event queue(amt->events)
if an interface is the gateway mode.
Fixes: cbc21dc1cfe9 ("amt: add data plane of amt interface")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Add spi_device_id entries to silent SPI warnings.
Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220717135831.2492844-2-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Add spi_device_id entries to silent following warnings:
SPI driver sja1105 has no spi_device_id for nxp,sja1105e
SPI driver sja1105 has no spi_device_id for nxp,sja1105t
SPI driver sja1105 has no spi_device_id for nxp,sja1105p
SPI driver sja1105 has no spi_device_id for nxp,sja1105q
SPI driver sja1105 has no spi_device_id for nxp,sja1105r
SPI driver sja1105 has no spi_device_id for nxp,sja1105s
SPI driver sja1105 has no spi_device_id for nxp,sja1110a
SPI driver sja1105 has no spi_device_id for nxp,sja1110b
SPI driver sja1105 has no spi_device_id for nxp,sja1110c
SPI driver sja1105 has no spi_device_id for nxp,sja1110d
Fixes: 5fa6863ba692 ("spi: Check we have a spi_device_id for each DT compatible")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.
Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once.
Fixes: e36edd9d26cf ("be2net: add ethtool "-m" option support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Link: https://lore.kernel.org/r/20220716085134.6095-1-hristo@venev.name
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Disable is done in stmmac_init_eee() on the event of MAC link down.
Since setting enable/disable EEE via ethtool will eventually trigger
a MAC down, removing this redunctant call in stmmac_ethtool.c to avoid
calling xpcs_config_eee() twice.
Fixes: d4aeaed80b0e ("net: stmmac: trigger PCS EEE to turn off on link down")
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Link: https://lore.kernel.org/r/20220715122402.1017470-1-vee.khee.wong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
It is possible to disable VFs while the PF driver is processing requests
from the VF driver. This can result in a panic.
BUG: unable to handle kernel paging request at 000000000000106c
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- -
Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020
RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe]
Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff
01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c
00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a
RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002
RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b
RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006
RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780
R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020
R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80
FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
? ttwu_do_wakeup+0x19/0x140
? try_to_wake_up+0x1cd/0x550
? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf]
ixgbe_msix_other+0x17e/0x310 [ixgbe]
__handle_irq_event_percpu+0x40/0x180
handle_irq_event_percpu+0x30/0x80
handle_irq_event+0x36/0x53
handle_edge_irq+0x82/0x190
handle_irq+0x1c/0x30
do_IRQ+0x49/0xd0
common_interrupt+0xf/0xf
This can be eventually be reproduced with the following script:
while :
do
echo 63 > /sys/class/net/<devname>/device/sriov_numvfs
sleep 1
echo 0 > /sys/class/net/<devname>/device/sriov_numvfs
sleep 1
done
Add lock when disabling SR-IOV to prevent process VF mailbox communication.
Fixes: d773d1310625 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned")
Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Fix an issue when driver incorrectly detects state
of recovery process and erroneously reinitializes interrupts,
which results in a kernel error and call trace message.
The issue was caused by a combination of two factors:
1. Assuming the EMP reset issued after completing
firmware recovery means the whole recovery process is complete.
2. Erroneous reinitialization of interrupt vector after detecting
the above mentioned EMP reset.
Fixes (1) by changing how recovery state change is detected
and (2) by adjusting the conditional expression to ensure using proper
interrupt reinitialization method, depending on the situation.
Fixes: 4ff0ee1af016 ("i40e: Introduce recovery mode support")
Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220715214542.2968762-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
In mtk_wed_tx_ring_setup(.., int idx, ..), idx is used as an index here
struct mtk_wed_ring *ring = &dev->tx_ring[idx];
The bounds of idx are checked here
BUG_ON(idx > ARRAY_SIZE(dev->tx_ring));
If idx is the size of the array, it will pass this check and overflow.
So change the check to >= .
Fixes: 804775dfc288 ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220716214654.1540240-1-trix@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
When the SW bridge was trying to add/remove entries to/from HW, the
access to HW was not protected by any lock. In this way, it was
possible to have race conditions.
Fix this by using the lan966x->mac_lock to protect parallel access to HW
for this cases.
Fixes: 25ee9561ec622 ("net: lan966x: More MAC table functionality")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
The problem with this spin lock is that it was just protecting the list
of the MAC entries in SW and not also the access to the MAC entries in HW.
Because the access to HW is indirect, then it could happen to have race
conditions.
For example when SW introduced an entry in MAC table and the irq mac is
trying to read something from the MAC.
Update such that also the access to MAC entries in HW is protected by
this lock.
Fixes: 5ccd66e01cbef ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
To remove an entry to the MAC table, it is required first to setup the
entry and then issue a command for the MAC to forget the entry.
So if it happens for two threads to remove simultaneously an entry
in MAC table then it would be a race condition.
Fix this by using lan966x->mac_lock to protect the HW access.
Fixes: e18aba8941b40 ("net: lan966x: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
To add an entry to the MAC table, it is required first to setup the
entry and then issue a command for the MAC to learn the entry.
So if it happens for two threads to add simultaneously an entry in MAC
table then it would be a race condition.
Fix this by using lan966x->mac_lock to protect the HW access.
Fixes: fc0c3fe7486f2 ("net: lan966x: Add function lan966x_mac_ip_learn()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | |/ / / / / / / /
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
When the HW deletes an entry in MAC table then it generates an
interrupt. The SW will go through it's own list of MAC entries and if it
is not found then it would notify the listeners about this. The problem
is that when the SW will go through it's own list it would take a spin
lock(lan966x->mac_lock) and when it notifies that the entry is deleted.
But to notify the listeners it taking the rtnl_lock which is illegal.
This is fixed by instead of notifying right away that the entry is
deleted, move the entry on a temp list and once, it checks all the
entries then just notify that the entries from temp list are deleted.
Fixes: 5ccd66e01cbe ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
While reading sysctl_igmp_qrv, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
This test can be packed into a helper, so such changes will be in the
follow-up series after net is merged into net-next.
qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);
Fixes: a9fe8e29945d ("ipv4: implement igmp_qrv sysctl to tune igmp robustness variable")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Adjusted as per packet processor documentation.
This allows to properly match 'indev' for clsact rules.
Fixes: 47327e198d42 ("net: prestera: acl: migrate to new vTCAM api")
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
When queue number is > 4, left shift overflows due to 32 bits
integer variable. Mask calculation is wrong for MTL_RXQ_DMA_MAP1.
If CONFIG_UBSAN is enabled, kernel dumps below warning:
[ 10.363842] ==================================================================
[ 10.363882] UBSAN: shift-out-of-bounds in /build/linux-intel-iotg-5.15-8e6Tf4/
linux-intel-iotg-5.15-5.15.0/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:224:12
[ 10.363929] shift exponent 40 is too large for 32-bit type 'unsigned int'
[ 10.363953] CPU: 1 PID: 599 Comm: NetworkManager Not tainted 5.15.0-1003-intel-iotg
[ 10.363956] Hardware name: ADLINK Technology Inc. LEC-EL/LEC-EL, BIOS 0.15.11 12/22/2021
[ 10.363958] Call Trace:
[ 10.363960] <TASK>
[ 10.363963] dump_stack_lvl+0x4a/0x5f
[ 10.363971] dump_stack+0x10/0x12
[ 10.363974] ubsan_epilogue+0x9/0x45
[ 10.363976] __ubsan_handle_shift_out_of_bounds.cold+0x61/0x10e
[ 10.363979] ? wake_up_klogd+0x4a/0x50
[ 10.363983] ? vprintk_emit+0x8f/0x240
[ 10.363986] dwmac4_map_mtl_dma.cold+0x42/0x91 [stmmac]
[ 10.364001] stmmac_mtl_configuration+0x1ce/0x7a0 [stmmac]
[ 10.364009] ? dwmac410_dma_init_channel+0x70/0x70 [stmmac]
[ 10.364020] stmmac_hw_setup.cold+0xf/0xb14 [stmmac]
[ 10.364030] ? page_pool_alloc_pages+0x4d/0x70
[ 10.364034] ? stmmac_clear_tx_descriptors+0x6e/0xe0 [stmmac]
[ 10.364042] stmmac_open+0x39e/0x920 [stmmac]
[ 10.364050] __dev_open+0xf0/0x1a0
[ 10.364054] __dev_change_flags+0x188/0x1f0
[ 10.364057] dev_change_flags+0x26/0x60
[ 10.364059] do_setlink+0x908/0xc40
[ 10.364062] ? do_setlink+0xb10/0xc40
[ 10.364064] ? __nla_validate_parse+0x4c/0x1a0
[ 10.364068] __rtnl_newlink+0x597/0xa10
[ 10.364072] ? __nla_reserve+0x41/0x50
[ 10.364074] ? __kmalloc_node_track_caller+0x1d0/0x4d0
[ 10.364079] ? pskb_expand_head+0x75/0x310
[ 10.364082] ? nla_reserve_64bit+0x21/0x40
[ 10.364086] ? skb_free_head+0x65/0x80
[ 10.364089] ? security_sock_rcv_skb+0x2c/0x50
[ 10.364094] ? __cond_resched+0x19/0x30
[ 10.364097] ? kmem_cache_alloc_trace+0x15a/0x420
[ 10.364100] rtnl_newlink+0x49/0x70
This change fixes MTL_RXQ_DMA_MAP1 mask issue and channel/queue
mapping warning.
Fixes: d43042f4da3e ("net: stmmac: mapping mtl rx to dma channel")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216195
Reported-by: Cedric Wassenaar <cedric@bytespeed.nl>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | |
| | | | | | | | | |
Using current implementation of polling mode, there is high chances we
will hit into timeout error when running phc2sys. Hence, update the
implementation of hardware crosstimestamping to use the MAC interrupt
service routine instead of polling for TSIS bit in the MAC Timestamp
Interrupt Status register to be set.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | |\ \ \ \ \ \ \ \
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-14
This series contains updates to e1000e and igc drivers.
Sasha re-enables GPT clock when exiting s0ix to prevent hardware unit
hang and reverts a workaround for this issue on e1000e.
Lennert Buytenhek restores checks for removed device while accessing
registers to prevent NULL pointer dereferences for igc.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Reinstate IGC_REMOVED logic and implement it properly
Revert "e1000e: Fix possible HW unit hang after an s0ix exit"
e1000e: Enable GPT clock before sending message to CSME
====================
Link: https://lore.kernel.org/r/20220714175857.933537-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
The initially merged version of the igc driver code (via commit
146740f9abc4, "igc: Add support for PF") contained the following
IGC_REMOVED checks in the igc_rd32/wr32() MMIO accessors:
u32 igc_rd32(struct igc_hw *hw, u32 reg)
{
u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
u32 value = 0;
if (IGC_REMOVED(hw_addr))
return ~value;
value = readl(&hw_addr[reg]);
/* reads should not return all F's */
if (!(~value) && (!reg || !(~readl(hw_addr))))
hw->hw_addr = NULL;
return value;
}
And:
#define wr32(reg, val) \
do { \
u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \
if (!IGC_REMOVED(hw_addr)) \
writel((val), &hw_addr[(reg)]); \
} while (0)
E.g. igb has similar checks in its MMIO accessors, and has a similar
macro E1000_REMOVED, which is implemented as follows:
#define E1000_REMOVED(h) unlikely(!(h))
These checks serve to detect and take note of an 0xffffffff MMIO read
return from the device, which can be caused by a PCIe link flap or some
other kind of PCI bus error, and to avoid performing MMIO reads and
writes from that point onwards.
However, the IGC_REMOVED macro was not originally implemented:
#ifndef IGC_REMOVED
#define IGC_REMOVED(a) (0)
#endif /* IGC_REMOVED */
This led to the IGC_REMOVED logic to be removed entirely in a
subsequent commit (commit 3c215fb18e70, "igc: remove IGC_REMOVED
function"), with the rationale that such checks matter only for
virtualization and that igc does not support virtualization -- but a
PCIe device can become detached even without virtualization being in
use, and without proper checks, a PCIe bus error affecting an igc
adapter will lead to various NULL pointer dereferences, as the first
access after the error will set hw->hw_addr to NULL, and subsequent
accesses will blindly dereference this now-NULL pointer.
This patch reinstates the IGC_REMOVED checks in igc_rd32/wr32(), and
implements IGC_REMOVED the way it is done for igb, by checking for the
unlikely() case of hw_addr being NULL. This change prevents the oopses
seen when a PCIe link flap occurs on an igc adapter.
Fixes: 146740f9abc4 ("igc: Add support for PF")
Signed-off-by: Lennert Buytenhek <buytenh@arista.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
This reverts commit 1866aa0d0d6492bc2f8d22d0df49abaccf50cddd.
Commit 1866aa0d0d64 ("e1000e: Fix possible HW unit hang after an s0ix
exit") was a workaround for CSME problem to handle messages comes via H2ME
mailbox. This problem has been fixed by patch "e1000e: Enable the GPT
clock before sending message to the CSME".
Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
On corporate (CSME) ADL systems, the Ethernet Controller may stop working
("HW unit hang") after exiting from the s0ix state. The reason is that
CSME misses the message sent by the host. Enabling the dynamic GPT clock
solves this problem. This clock is cleared upon HW initialization.
Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
In ksz_switch_register(), we should call of_node_put() for the
reference returned by of_get_child_by_name() which has increased
the refcount.
Fixes: 912aae27c6af ("net: dsa: microchip: really look for phy-mode in port nodes")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220714153138.375919-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Current stmmac driver will prepare/enable ptp_ref clock in
stmmac_init_tstamp_counter().
The stmmac_pltfr_noirq_suspend will disable it once in suspend flow.
But in resume flow,
stmmac_pltfr_noirq_resume --> stmmac_init_tstamp_counter
stmmac_resume --> stmmac_hw_setup --> stmmac_init_ptp --> stmmac_init_tstamp_counter
ptp_ref clock reference counter increases twice, which leads to unbalance
ptp clock when resume back.
Move ptp_ref clock prepare/enable out of stmmac_init_tstamp_counter to fix it.
Fixes: 0735e639f129d ("net: stmmac: skip only stmmac_ptp_register when resume from suspend")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
If netif is running when stmmac_dvr_remove is invoked,
the unregister_netdev will call ndo_stop(stmmac_release) and
vlan_kill_rx_filter(stmmac_vlan_rx_kill_vid).
Currently, stmmac_dvr_remove() will disable pm runtime before
unregister_netdev. When stmmac_vlan_rx_kill_vid is invoked,
pm_runtime_resume_and_get in it returns EACCESS error number,
and reports:
dwmac-mediatek 11021000.ethernet eth0: stmmac_dvr_remove: removing driver
dwmac-mediatek 11021000.ethernet eth0: FPE workqueue stop
dwmac-mediatek 11021000.ethernet eth0: failed to kill vid 0081/0
Move the pm_runtime_disable to the end of stmmac_dvr_remove
to fix this issue.
Fixes: 6449520391dfc ("net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
The pm_runtime takes care of the clock handling in current
stmmac drivers, and dwmac-mediatek implement the
mediatek_dwmac_clks_config() as the callback for pm_runtime.
Then, stripping duplicated clocks handling in old init()/exit()
to fix clock issue in suspend/resume test.
As to clocks in probe/remove, vendor need symmetric handling to
ensure clocks balance.
Test pass, including suspend/resume and ko insertion/remove.
Fixes: 3186bdad97d5 ("stmmac: dwmac-mediatek: add platform level clocks management")
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
While reading sysctl_ip_fwd_update_priority, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 432e05d32892 ("net: ipv4: Control SKB reprioritization after forwarding")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
While reading sysctl_ip_default_ttl, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
| |\ \ \ \ \ \ \ \ \ \
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Pull rdma fixes from Jason Gunthorpe:
"Two bug fixes for irdma:
- x722 does not support 1GB pages, trying to configure them will
corrupt the dma mapping
- Fix a sleep while holding a spinlock"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/irdma: Fix sleep from invalid context BUG
RDMA/irdma: Do not advertise 1GB page size for x722
|
| | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | | | |
Taking the qos_mutex to process RoCEv2 QP's on netdev events causes a
kernel splat.
Fix this by removing the handling for RoCEv2 in
irdma_cm_teardown_connections that uses the mutex. This handling is only
needed for iWARP to avoid having connections established while the link is
down or having connections remain functional after the IP address is
removed.
BUG: sleeping function called from invalid context at kernel/locking/mutex.
Call Trace:
kernel: dump_stack+0x66/0x90
kernel: ___might_sleep.cold.92+0x8d/0x9a
kernel: mutex_lock+0x1c/0x40
kernel: irdma_cm_teardown_connections+0x28e/0x4d0 [irdma]
kernel: ? check_preempt_curr+0x7a/0x90
kernel: ? select_idle_sibling+0x22/0x3c0
kernel: ? select_task_rq_fair+0x94c/0xc90
kernel: ? irdma_exec_cqp_cmd+0xc27/0x17c0 [irdma]
kernel: ? __wake_up_common+0x7a/0x190
kernel: irdma_if_notify+0x3cc/0x450 [irdma]
kernel: ? sched_clock_cpu+0xc/0xb0
kernel: irdma_inet6addr_event+0xc6/0x150 [irdma]
Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
| | | |_|/ / / / / / /
| |/| | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
x722 does not support 1GB page size but the irdma driver incorrectly
advertises 1GB page size support for x722 device to ib_core to compute the
best page size to use on this MR. This could lead to incorrect start
offsets computed by hardware on the MR.
Fixes: b48c24c2d710 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
| |\ \ \ \ \ \ \ \ \ \
| |_|_|_|/ / / / / /
|/| | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux
Pull hardware timestamp fix from Thierry Reding:
"A single fix for an out-of-sync kerneldoc comment"
* tag 'hte/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
gpiolib: cdev: Fix kernel doc for struct line
|
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | |
Kernel doc validator is not happy:
gpiolib-cdev.c:487: warning: Function parameter or member 'hdesc' not described in 'line'
gpiolib-cdev.c:487: warning: Function parameter or member 'raw_level' not described in 'line'
gpiolib-cdev.c:487: warning: Function parameter or member 'total_discard_seq' not described in 'line'
gpiolib-cdev.c:487: warning: Function parameter or member 'last_seqno' not described in 'line'
Describe above mentioned parameters.
Fixes: 2068339a6c35 ("gpiolib: cdev: Add hardware timestamp clock type")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
