aboutsummaryrefslogtreecommitdiffstats
path: root/include/linux
Commit message (Collapse)AuthorAgeFilesLines
* svcrdma: Improve allocation of struct svc_rdma_req_mapChuck Lever2016-01-191-2/+6
| | | | | | | | | To ensure this allocation cannot fail and will not sleep, pre-allocate the req_map structures per-connection. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* svcrdma: Improve allocation of struct svc_rdma_op_ctxtChuck Lever2016-01-191-1/+5
| | | | | | | | | | | | | | | | | | | | When the maximum payload size of NFS READ and WRITE was increased by commit cc9a903d915c ("svcrdma: Change maximum server payload back to RPCSVC_MAXPAYLOAD"), the size of struct svc_rdma_op_ctxt increased to over 6KB (on x86_64). That makes allocating one of these from a kmem_cache more likely to fail in situations when system memory is exhausted. Since I'm about to add a caller where this allocation must always work _and_ it cannot sleep, pre-allocate ctxts for each connection. Another motivation for this change is that NFSv4.x servers are required by specification not to drop NFS requests. Pre-allocating memory resources reduces the likelihood of a drop. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx4: Remove unused macroMoni Shoua2016-01-191-4/+0
| | | | | | | | The macro mlx4_foreach_non_ib_transport_port() is not used anywhere. Remove it. Fixes: aa9a2d51a3e7 ("mlx4: Activate RoCE/SRIOV") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Advertise atomic capabilities in query deviceEran Ben Elisha2015-12-241-0/+5
| | | | | | | | | | In order to ensure IB spec atomic correctness in atomic operations, if HW is configured to host endianness, advertise IB_ATOMIC_HCA. if not, advertise IB_ATOMIC_NONE. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx5_core: Add setting ATOMIC endian modeEran Ben Elisha2015-12-241-7/+15
| | | | | | | | | | | HW is capable of 2 requestor endianness modes for standard 8 Bytes atomic: BE (0x0) and host endianness (0x1). Read the supported modes from hca atomic capabilities and configure HW to host endianness mode if supported. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Add driver cross-channel supportLeon Romanovsky2015-12-231-0/+3
| | | | | | | | | | | | | | | | | Add support of cross-channel functionality to mlx5 driver. This includes ability to ignore overrun for CQ which intended for cross-channel, export device capability and configure the QP to be sync master/slave queues. The cross-channel enabled QP supports combination of three possible properties: * WQE processing on the receive queue of this QP * WQE processing on the send queue of this QP * WQE are supported on the send queue Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Add hca_core_clock_offset to udata in init_ucontextMatan Barak2015-12-231-2/+5
| | | | | | | | | | | | Pass hca_core_clock_offset to user-space is mandatory in order to let the user-space read the free-running clock register from the right offset in the memory mapped page. Passing this value is done by changing the vendor's command and response of init_ucontext to be in extensible form. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Add support for hca_core_clock and timestamp_maskMatan Barak2015-12-231-3/+6
| | | | | | | | | | | | Reporting the hca_core_clock (in kHZ) and the timestamp_mask in query_device extended verb. timestamp_mask is used by users in order to know what is the valid range of the raw timestamps, while hca_core_clock reports the clock frequency that is used for timestamps. Signed-off-by: Matan Barak <matanb@mellanox.com> Reviewed-by: Moshe Lazer <moshel@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Add RoCE fields to Address VectorAchiad Shochat2015-12-231-6/+15
| | | | | | | | Set the address handle and QP address path fields according to the link layer type (IB/Eth). Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Support IB device's callbacks for adding/deleting GIDsAchiad Shochat2015-12-231-0/+20
| | | | | | | | These callbacks write into the mlx5 RoCE address table. Upon del_gid we write a zero'd GID. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Set network_hdr_type upon RoCE responder completionAchiad Shochat2015-12-231-0/+6
| | | | | | | | | When handling a responder completion, if the link layer is Ethernet, set the work completion network_hdr_type field according to CQE's info and the IB_WC_WITH_NETWORK_HDR_TYPE flag. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* IB/mlx5: Extend query_device/port to support RoCEAchiad Shochat2015-12-231-7/+0
| | | | | | | | | Using the vport access functions to retrieve the Ethernet specific information and return this information in ib_query_device and ib_query_port. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx5_core: Introduce access functions to query vport RoCE fieldsAchiad Shochat2015-12-232-1/+14
| | | | | | | | Introduce access functions to query NIC vport system_image_guid, node_guid and qkey_viol_cntr. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* net/mlx5_core: Introduce access functions to enable/disable RoCEAchiad Shochat2015-12-231-0/+3
| | | | | | | | | | A mlx5 Ethernet port must be explicitly enabled for RoCE. When RoCE is not enabled on the port, the NIC will refuse to create QPs attached to it and incoming RoCE packets will be considered by the NIC as plain Ethernet packets. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* Merge branches '4.5/Or-cleanup' and '4.5/rdma-cq' into k.o/for-4.5Doug Ledford2015-12-223-47/+26
|\ | | | | | | | | | | | | Signed-off-by: Doug Ledford <dledford@redhat.com> Conflicts: drivers/infiniband/ulp/iser/iser_verbs.c
| * Merge branch 'rdma-cq.2' of git://git.infradead.org/users/hch/rdma into ↵Doug Ledford2015-12-153-47/+26
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | 4.5/rdma-cq Signed-off-by: Doug Ledford <dledford@redhat.com> Conflicts: drivers/infiniband/ulp/srp/ib_srp.c - Conflicts with changes in ib_srp.c introduced during 4.4-rc updates
| | * irq_poll: remove unused data and max fieldsChristoph Hellwig2015-12-111-2/+0
| | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
| | * irq_poll: mark __irq_poll_complete staticChristoph Hellwig2015-12-111-1/+0
| | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
| | * irq_poll: fold irq_poll_disable_pending into irq_poll_softirqChristoph Hellwig2015-12-111-5/+0
| | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
| | * irq_poll: fold irq_poll_sched_prep into irq_poll_schedChristoph Hellwig2015-12-111-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | There is no good reason to keep them apart, and this makes using the API a bit simpler. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
| | * irq_poll: make blk-iopoll available outside the block layerChristoph Hellwig2015-12-113-47/+47
| | | | | | | | | | | | | | | | | | | | | | | | The new name is irq_poll as iopoll is already taken. Better suggestions welcome. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
* | | Merge tag 'scsi-fixes' of ↵Linus Torvalds2015-12-181-0/+4
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Three fixes this time, two in SES picked up by KASAN for various types of buffer overrun. The first is a USB array which returns page 8 whatever is asked for and causes us to overrun with incorrect data format assumptions and the second is an invalid iteration of page 10 (the additional information page). The final fix is a reversion of a NULL deref fix which caused suspend/resume not to be called in pairs leading to incorrect device operation (Jens has queued a more proper fix for the problem in block)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: ses: fix additional element traversal bug Revert "SCSI: Fix NULL pointer dereference in runtime PM" ses: Fix problems with simple enclosures
| * | | ses: fix additional element traversal bugJames Bottomley2015-12-111-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KASAN found that our additional element processing scripts drop off the end of the VPD page into unallocated space. The reason is that not every element has additional information but our traversal routines think they do, leading to them expecting far more additional information than is present. Fix this by adding a gate to the traversal routine so that it only processes elements that are expected to have additional information (list is in SES-2 section 6.1.13.1: Additional Element Status diagnostic page overview) Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Tested-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Cc: stable@vger.kernel.org Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* | | | include/linux/mmdebug.h: should include linux/bug.hJames Morse2015-12-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included linux/bug.h. Include it ourselves. This saves build-failures such as: arch/arm64/include/asm/pgtable.h: In function 'set_pte_at': arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration] VM_WARN_ONCE(!pte_young(pte), Fixes: 02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-12-175-10/+17
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix uninitialized variable warnings in nfnetlink_queue, a lot of people reported this... From Arnd Bergmann. 2) Don't init mutex twice in i40e driver, from Jesse Brandeburg. 3) Fix spurious EBUSY in rhashtable, from Herbert Xu. 4) Missing DMA unmaps in mvpp2 driver, from Marcin Wojtas. 5) Fix race with work structure access in pppoe driver causing corruptions, from Guillaume Nault. 6) Fix OOPS due to sh_eth_rx() not checking whether netdev_alloc_skb() actually succeeded or not, from Sergei Shtylyov. 7) Don't lose flags when settifn IFA_F_OPTIMISTIC in ipv6 code, from Bjørn Mork. 8) VXLAN_HD_RCO defined incorrectly, fix from Jiri Benc. 9) Fix clock source used for cookies in SCTP, from Marcelo Ricardo Leitner. 10) aurora driver needs HAS_DMA dependency, from Geert Uytterhoeven. 11) ndo_fill_metadata_dst op of vxlan has to handle ipv6 tunneling properly as well, from Jiri Benc. 12) Handle request sockets properly in xfrm layer, from Eric Dumazet. 13) Double stats update in ipv6 geneve transmit path, fix from Pravin B Shelar. 14) sk->sk_policy[] needs RCU protection, and as a result xfrm_policy_destroy() needs to free policies using an RCU grace period, from Eric Dumazet. 15) SCTP needs to clone ipv6 tx options in order to avoid use after free, from Eric Dumazet. 16) Missing kbuild export if ila.h, from Stephen Hemminger. 17) Missing mdiobus_alloc() return value checking in mdio-mux.c, from Tobias Klauser. 18) Validate protocol value range in ->create() methods, from Hannes Frederic Sowa. 19) Fix early socket demux races that result in illegal dst reuse, from Eric Dumazet. 20) Validate socket address length in pptp code, from WANG Cong. 21) skb_reorder_vlan_header() uses incorrect offset and can corrupt packets, from Vlad Yasevich. 22) Fix memory leaks in nl80211 registry code, from Ola Olsson. 23) Timeout loop count handing fixes in mISDN, xgbe, qlge, sfc, and qlcnic. From Dan Carpenter. 24) msg.msg_iocb needs to be cleared in recvfrom() otherwise, for example, AF_ALG will interpret it as an async call. From Tadeusz Struk. 25) inetpeer_set_addr_v4 forgets to initialize the 'vif' field, from Eric Dumazet. 26) rhashtable enforces the minimum table size not early enough, breaking how we calculate the per-cpu lock allocations. From Herbert Xu. 27) Fix FCC port lockup in 82xx driver, from Martin Roth. 28) FOU sockets need to be freed using RCU, from Hannes Frederic Sowa. 29) Fix out-of-bounds access in __skb_complete_tx_timestamp() and sock_setsockopt() wrt. timestamp handling. From WANG Cong. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (117 commits) net: check both type and procotol for tcp sockets drivers: net: xgene: fix Tx flow control tcp: restore fastopen with no data in SYN packet af_unix: Revert 'lock_interruptible' in stream receive code fou: clean up socket with kfree_rcu 82xx: FCC: Fixing a bug causing to FCC port lock-up gianfar: Don't enable RX Filer if not supported net: fix warnings in 'make htmldocs' by moving macro definition out of field declaration rhashtable: Fix walker list corruption rhashtable: Enforce minimum size on initial hash table inet: tcp: fix inetpeer_set_addr_v4() ipv6: automatically enable stable privacy mode if stable_secret set net: fix uninitialized variable issue bluetooth: Validate socket address length in sco_sock_bind(). net_sched: make qdisc_tree_decrease_qlen() work for non mq ser_gigaset: remove unnecessary kfree() calls from release method ser_gigaset: fix deallocation of platform device structure ser_gigaset: turn nonsense checks into WARN_ON ser_gigaset: fix up NULL checks qlcnic: fix a timeout loop ...
| * \ \ \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller2015-12-141-1/+1
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pablo Neira Ayuso says: ==================== netfilter fixes for net The following patchset contains Netfilter fixes for you net tree, specifically for nf_tables and nfnetlink_queue, they are: 1) Avoid a compilation warning in nfnetlink_queue that was introduced in the previous merge window with the simplification of the conntrack integration, from Arnd Bergmann. 2) nfnetlink_queue is leaking the pernet subsystem registration from a failure path, patch from Nikolay Borisov. 3) Pass down netns pointer to batch callback in nfnetlink, this is the largest patch and it is not a bugfix but it is a dependency to resolve a splat in the correct way. 4) Fix a splat due to incorrect socket memory accounting with nfnetlink skbuff clones. 5) Add missing conntrack dependencies to NFT_DUP_IPV4 and NFT_DUP_IPV6. 6) Traverse the nftables commit list in reverse order from the commit path, otherwise we crash when the user applies an incremental update via 'nft -f' that deletes an object that was just introduced in this batch, from Xin Long. Regarding the compilation warning fix, many people have sent us (and keep sending us) patches to address this, that's why I'm including this batch even if this is not critical. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | netfilter: nfnetlink: avoid recurrent netns lookups in call_batchPablo Neira Ayuso2015-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pass the net pointer to the call_batch callback functions so we can skip recurrent lookups. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Tested-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
| * | | | | qed: fix handling of concurrent ramrods.Tomer Tayar2015-12-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Concurrent non-blocking slowpath ramrods can be completed out-of-order on the completion chain. Recycling completed elements, while previously sent elements are still completion pending, can lead to overriding of active elements on the chain. Furthermore, sending pending slowpath ramrods currently lacks the update of the chain element physical pointer. This patch: * Ensures that ramrods are sent to the FW with consecutive echo values. * Handles out-of-order completions by freeing only first successive completed entries. * Updates the chain element physical pointer when copying a pending element into a free element for sending. Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | qed: Fix corner case for chain in-between pagesTomer Tayar2015-12-071-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The amount of chain next pointer elements between the producer and the consumer indices depends on which pages they currently point to. The current calculation is based only on their difference, and it can lead to a number of free elements which is higher by 1 than the actual value. Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net: remove unnecessary semicolon in netdev_alloc_pcpu_stats()Felix Fietkau2015-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This semicolon causes a build error if the function call is wrapped in parentheses. Fixes: aabc92bbe3cf ("net: add __netdev_alloc_pcpu_stats() to indicate gfp flags") Reported-by: Imre Kaloz <kaloz@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | rhashtable: Prevent spurious EBUSY errors on insertionHerbert Xu2015-12-041-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thomas and Phil observed that under stress rhashtable insertion sometimes failed with EBUSY, even though this error should only ever been seen when we're under attack and our hash chain length has grown to an unacceptable level, even after a rehash. It turns out that the logic for detecting whether there is an existing rehash is faulty. In particular, when two threads both try to grow the same table at the same time, one of them may see the newly grown table and thus erroneously conclude that it had been rehashed. This is what leads to the EBUSY error. This patch fixes this by remembering the current last table we used during insertion so that rhashtable_insert_rehash can detect when another thread has also done a resize/rehash. When this is detected we will give up our resize/rehash and simply retry the insertion with the new table. Reported-by: Thomas Graf <tgraf@suug.ch> Reported-by: Phil Sutter <phil@nwl.cc> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | | | Merge tag 'dmaengine-fix-4.4-rc6' of ↵Linus Torvalds2015-12-151-1/+1
|\ \ \ \ \ \ | |_|_|_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This has fixes spread thru driver, notably among them: - edma fixes for recent edma DT changes which went into 4.4 - odd fixes for at_hdmac - minor fixes on bc dma and mic dma" * tag 'dmaengine-fix-4.4-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: at_xdmac: fix at_xdmac_prep_dma_memcpy() dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type dmaengine: mic_x100: add missing spin_unlock dmaengine: bcm2835-dma: Convert to use DMA pool dmaengine: at_xdmac: fix bad behavior in interleaved mode dmaengine: at_xdmac: fix false condition for memset_sg transfers dmaengine: at_xdmac: fix macro typo
| * | | | | Merge branch 'fix/edma' into fixesVinod Koul2015-12-101-1/+1
| |\ \ \ \ \
| | * | | | | dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit typePeter Ujfalusi2015-12-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes the DT file to be easier to read since the memcpy channels array does not need the '/bits/ 16' to be specified, which might confuse some people. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | | | | | | sched/wait: Fix the signal handling fixPeter Zijlstra2015-12-131-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jan Stancek reported that I wrecked things for him by fixing things for Vladimir :/ His report was due to an UNINTERRUPTIBLE wait getting -EINTR, which should not be possible, however my previous patch made this possible by unconditionally checking signal_pending(). We cannot use current->state as was done previously, because the instruction after the store to that variable it can be changed. We must instead pass the initial state along and use that. Fixes: 68985633bccb ("sched/wait: Fix signal handling in bit wait helpers") Reported-by: Jan Stancek <jstancek@redhat.com> Reported-by: Chris Mason <clm@fb.com> Tested-by: Jan Stancek <jstancek@redhat.com> Tested-by: Vladimir Murzin <vladimir.murzin@arm.com> Tested-by: Chris Mason <clm@fb.com> Reviewed-by: Paul Turner <pjt@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: tglx@linutronix.de Cc: Oleg Nesterov <oleg@redhat.com> Cc: hpa@zytor.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2015-12-131-0/+1
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixlets from Thomas Gleixner: "Two trivial fixes which add missing header fileas and forward declarations so the code will compile even when the magic include chains are different" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3: Add missing include for barrier.h irqchip/gic-v3: Add missing struct device_node declaration
| * | | | | | | irqchip/gic-v3: Add missing struct device_node declarationMarc Zyngier2015-12-101-0/+1
| | |_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the GICv3 header file is used in a C file that doesn't include any of the OF stuff, we end up with a bunch of ugly warnings. Let's keep GCC quiet by adding a forward declaration. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1449483072-17694-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | | | | | | Merge tag 'usb-4.4-rc5' of ↵Linus Torvalds2015-12-131-0/+3
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are a number of small USB fixes for 4.4-rc5. All of them have been in linux-next. The majority are gadget and phy issues, with a few new quirks and device ids added as well" * tag 'usb-4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (32 commits) USB: add quirk for devices with broken LPM xhci: fix usb2 resume timing and races. usb: musb: fail with error when no DMA controller set usb: gadget: uvc: fix permissions of configfs attributes usb: musb: core: Fix pm runtime for deferred probe usb: phy: msm: fix a possible NULL dereference USB: host: ohci-at91: fix a crash in ohci_hcd_at91_overcurrent_irq usb: Quiet down false peer failure messages usb: xhci: fix config fail of FS hub behind a HS hub with MTT xhci: Fix memory leak in xhci_pme_acpi_rtd3_enable() usb: Use the USB_SS_MULT() macro to decode burst multiplier for log message USB: whci-hcd: add check for dma mapping error usb: core : hub: Fix BOS 'NULL pointer' kernel panic USB: quirks: Apply ALWAYS_POLL to all ELAN devices usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron USB: quirks: Fix another ELAN touchscreen usb: dwc3: gadget: don't prestart interrupt endpoints USB: serial: Another Infineon flash loader USB ID USB: cdc_acm: Ignore Infineon Flash Loader utility USB: cp210x: Remove CP2110 ID from compatibility list ...
| * | | | | | | USB: add quirk for devices with broken LPMAlan Stern2015-12-111-0/+3
| | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB device / host controller combinations seem to have problems with Link Power Management. For example, Steinar found that his xHCI controller wouldn't handle bandwidth calculations correctly for two video cards simultaneously when LPM was enabled, even though the bus had plenty of bandwidth available. This patch introduces a new quirk flag for devices that should remain disabled for LPM, and creates quirk entries for Steinar's devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Steinar H. Gunderson <sgunderson@bigfoot.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | | | Merge branch 'akpm' (patches from Andrew)Linus Torvalds2015-12-122-4/+4
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MIPS: fix DMA contiguous allocation sh64: fix __NR_fgetxattr ocfs2: fix SGID not inherited issue mm/oom_kill.c: avoid attempting to kill init sharing same memory drivers/base/memory.c: prohibit offlining of memory blocks with missing sections tmpfs: fix shmem_evict_inode() warnings on i_blocks mm/hugetlb.c: fix resv map memory leak for placeholder entries mm: hugetlb: call huge_pte_alloc() only if ptep is null kernel: remove stop_machine() Kconfig dependency mm: kmemleak: mark kmemleak_init prototype as __init mm: fix kerneldoc on mem_cgroup_replace_page osd fs: __r4w_get_page rely on PageUptodate for uptodate MAINTAINERS: make Vladimir co-maintainer of the memory controller mm, vmstat: allow WQ concurrency to discover memory reclaim doesn't make any progress mm: fix swapped Movable and Reclaimable in /proc/pagetypeinfo memcg: fix memory.high target mm: hugetlb: fix hugepage memory leak caused by wrong reserve count
| * | | | | | | kernel: remove stop_machine() Kconfig dependencyChris Wilson2015-12-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the full stop_machine() routine is only enabled on SMP if module unloading is enabled, or if the CPUs are hotpluggable. This leads to configurations where stop_machine() is broken as it will then only run the callback on the local CPU with irqs disabled, and not stop the other CPUs or run the callback on them. For example, this breaks MTRR setup on x86 in certain configs since ea8596bb2d8d379 ("kprobes/x86: Remove unused text_poke_smp() and text_poke_smp_batch() functions") as the MTRR is only established on the boot CPU. This patch removes the Kconfig option for STOP_MACHINE and uses the SMP and HOTPLUG_CPU config options to compile the correct stop_machine() for the architecture, removing the false dependency on MODULE_UNLOAD in the process. Link: https://lkml.org/lkml/2014/10/8/124 References: https://bugs.freedesktop.org/show_bug.cgi?id=84794 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Pranith Kumar <bobby.prani@gmail.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Tejun Heo <tj@kernel.org> Cc: Iulia Manda <iulia.manda21@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | | | | | mm: kmemleak: mark kmemleak_init prototype as __initNicolas Iooss2015-12-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kmemleak_init() definition in mm/kmemleak.c is marked __init but its prototype in include/linux/kmemleak.h is marked __ref since commit a6186d89c913 ("kmemleak: Mark the early log buffer as __initdata"). This causes a section mismatch which is reported as a warning when building with clang -Wsection, because kmemleak_init() is declared in section .ref.text but defined in .init.text. Fix this by marking kmemleak_init() prototype __init. Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | | | | Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2015-12-121-7/+14
|\ \ \ \ \ \ \ \ | |/ / / / / / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull block layer fixes from Jens Axboe: "A set of fixes for the current series. This contains: - A bunch of fixes for lightnvm, should be the last round for this series. From Matias and Wenwei. - A writeback detach inode fix from Ilya, also marked for stable. - A block (though it says SCSI) fix for an OOPS in SCSI runtime power management. - Module init error path fixes for null_blk from Minfei" * 'for-linus' of git://git.kernel.dk/linux-block: null_blk: Fix error path in module initialization lightnvm: do not compile in debugging by default lightnvm: prevent gennvm module unload on use lightnvm: fix media mgr registration lightnvm: replace req queue with nvmdev for lld lightnvm: comments on constants lightnvm: check mm before use lightnvm: refactor spin_unlock in gennvm_get_blk lightnvm: put blks when luns configure failed lightnvm: use flags in rrpc_get_blk block: detach bdev inode from its wb in __blkdev_put() SCSI: Fix NULL pointer dereference in runtime PM
| * | | | | | | lightnvm: replace req queue with nvmdev for lldMatias Bjørling2015-12-071-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case where a request queue is passed to the low lever lightnvm device drive integration, the device driver might pass its admin commands through another queue. Instead pass nvm_dev, and let the low level drive the appropriate queue. Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
| * | | | | | | lightnvm: comments on constantsMatias Bjørling2015-12-071-0/+7
| | |_|_|/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not obvious what NVM_IO_* and NVM_BLK_T_* are used for. Make sure to comment them appropriately as the other constants. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* | | | | | | Merge tag 'for-linus' of ↵Linus Torvalds2015-12-101-0/+11
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Most are minor to important fixes. There is one performance enhancement that I took on the grounds that failing to check if other processes can run before running what's intended to be a background, idle-time task is a bug, even though the primary effect of the fix is to improve performance (and it was a very simple patch)" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/mlx5: Postpone remove_keys under knowledge of coming preemption IB/mlx4: Use vmalloc for WR buffers when needed IB/mlx4: Use correct order of variables in log message iser-target: Remove explicit mlx4 work-around mlx4: Expose correct max_sge_rd limit IB/mad: Require CM send method for everything except ClassPortInfo IB/cma: Add a missing rcu_read_unlock() IB core: Fix ib_sg_to_pages() IB/srp: Fix srp_map_sg_fr() IB/srp: Fix indirect data buffer rkey endianness IB/srp: Initialize dma_length in srp_map_idb IB/srp: Fix possible send queue overflow IB/srp: Fix a memory leak IB/sa: Put netlink request into the request list before sending IB/iser: use sector_div instead of do_div IB/core: use RCU for uverbs id lookup IB/qib: Minor fixes to qib per SFF 8636 IB/core: Fix user mode post wr corruption IB/qib: Fix qib_mr structure
| * | | | | | | mlx4: Expose correct max_sge_rd limitSagi Grimberg2015-12-081-0/+11
| | |_|_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mlx4 devices (ConnectX-2, ConnectX-3) has a limitation where rdma read work queue entries cannot exceed 512 bytes. A rdma_read wqe needs to fit in 512 bytes: - wqe control segment (16 bytes) - rdma segment (16 bytes) - scatter elements (16 bytes each) So max_sge_rd should be: (512 - 16 - 16) / 16 = 30. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | | | | | | Merge tag 'vfio-v4.4-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds2015-12-091-3/+0
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull VFIO fixes from Alex Williamson: - Various fixes for removing redundancy, const'ifying structs, avoiding stack usage, fixing WARN usage (Krzysztof Kozlowski, Julia Lawall, Kees Cook, Dan Carpenter) - Revert No-IOMMU mode as the intended user has not emerged (Alex Williamson) * tag 'vfio-v4.4-rc5' of git://github.com/awilliam/linux-vfio: Revert: "vfio: Include No-IOMMU mode" vfio: fix a warning message vfio: platform: remove needless stack usage vfio-pci: constify pci_error_handlers structures vfio: Drop owner assignment from platform_driver
| * | | | | | | Revert: "vfio: Include No-IOMMU mode"Alex Williamson2015-12-041-3/+0
| | |_|_|_|/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit 033291eccbdb ("vfio: Include No-IOMMU mode") due to lack of a user. This was originally intended to fill a need for the DPDK driver, but uptake has been slow so rather than support an unproven kernel interface revert it and revisit when userspace catches up. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* | | | | | | Merge tag 'devicetree-fixes-for-4.4-rc4' of ↵Linus Torvalds2015-12-091-7/+12
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DT fixes from Rob Herring: "I think this should be all for 4.4: - Fix incorrect warning about overlapping memory regions - Export of_irq_find_parent again which was made static in 4.4, but has users pending for 4.5. - Fix of_msi_map_rid declaration location - Fix re-entrancy for of_fdt_unflatten_tree - Clean-up of phys_addr_t printks" * tag 'devicetree-fixes-for-4.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of/irq: move of_msi_map_rid declaration to the correct ifdef section of/irq: Export of_irq_find_parent again of/fdt: Add mutex protection for calls to __unflatten_device_tree() of/address: fix typo in comment block of of_translate_one() of: do not use 0x in front of %pa of: Fix comparison of reserved memory regions
generated by cgit (git 2.34.1) at 2025-03-01 00:34:44 +0000