From 53d91034cf29936cabf9a4d59270dc94ed7e6c1d Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Wed, 15 Aug 2012 16:53:25 +0530 Subject: arm/dts: AM33XX: Set the default status of module to "disabled" state Ideally in common SoC dtsi file should set all modules to "disabled" state and it should get enabled in respective EVM/Board dts file as per usage. This patch sets default status of all modules to "disabled" state in am33xx.dtsi file. Currently there are no modules supported as part of Bone and EVM dts support, so care to add entry "status = "okay"" while adding support for any module. Signed-off-by: Vaibhav Hiremath Acked-by: Arnd Bergmann Cc: Benoit Cousson Cc: Grant Likely Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch/arm/boot/dts/am33xx.dtsi') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e5..5f6c8e33060f 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -102,36 +102,42 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + status = "disabled"; }; uart2: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + status = "disabled"; }; uart3: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + status = "disabled"; }; uart4: serial@481A6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + status = "disabled"; }; uart5: serial@481A8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + status = "disabled"; }; uart6: serial@481AA000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + status = "disabled"; }; i2c1: i2c@44E0B000 { @@ -139,6 +145,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + status = "disabled"; }; i2c2: i2c@4802A000 { @@ -146,6 +153,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + status = "disabled"; }; i2c3: i2c@4819C000 { @@ -153,6 +161,7 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + status = "disabled"; }; }; }; -- cgit From 5d83cb86227baf87ab04a646d60fb8b26b880743 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 27 Aug 2012 16:59:08 +0530 Subject: ARM: dts: AM33XX: Convert all hex numbers to lower-case To make it consistent, convert all hex number presentation to lower-case from all am33xx specific nodes. Signed-off-by: Vaibhav Hiremath Cc: Tony Lindgren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/am33xx.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch/arm/boot/dts/am33xx.dtsi') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index dde76f7e81a8..be435117f5dd 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -71,7 +71,7 @@ #interrupt-cells = <1>; }; - gpio2: gpio@4804C000 { + gpio2: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; @@ -80,7 +80,7 @@ #interrupt-cells = <1>; }; - gpio3: gpio@481AC000 { + gpio3: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; @@ -89,7 +89,7 @@ #interrupt-cells = <1>; }; - gpio4: gpio@481AE000 { + gpio4: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; @@ -98,7 +98,7 @@ #interrupt-cells = <1>; }; - uart1: serial@44E09000 { + uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; @@ -119,28 +119,28 @@ status = "disabled"; }; - uart4: serial@481A6000 { + uart4: serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; }; - uart5: serial@481A8000 { + uart5: serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; }; - uart6: serial@481AA000 { + uart6: serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -148,7 +148,7 @@ status = "disabled"; }; - i2c2: i2c@4802A000 { + i2c2: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; @@ -156,7 +156,7 @@ status = "disabled"; }; - i2c3: i2c@4819C000 { + i2c3: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; -- cgit From 4462b31cf416e74e54a37b57de7177cc4d244699 Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 27 Aug 2012 17:21:01 +0530 Subject: ARM: dts: AM33XX: Specify reg and interrupt property for all nodes The device/node resources (like, IORESOURCE_MEM and IORESOURCE_IRQ) are overwritten by hwmod resources, due to all known reasons but that should not be the reason for not providing all the information in the DTS blob. Ideally we should use DTS resource and use HWMOD framework wherever required and for only specific things. Newer platforms like, OMAP5 and AM33XX, we only support DT boot mode, so this patch is preparation for the future where we supposed to get rid of hwmod dependency anyway. Signed-off-by: Vaibhav Hiremath Cc: Tony Lindgren Signed-off-by: Benoit Cousson --- arch/arm/boot/dts/am33xx.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch/arm/boot/dts/am33xx.dtsi') diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index be435117f5dd..bb31bff01998 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -69,6 +69,9 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x44e07000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <96>; }; gpio2: gpio@4804c000 { @@ -78,6 +81,9 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x4804c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <98>; }; gpio3: gpio@481ac000 { @@ -87,6 +93,9 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ac000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <32>; }; gpio4: gpio@481ae000 { @@ -96,12 +105,18 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ae000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <62>; }; uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <72>; status = "disabled"; }; @@ -109,6 +124,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <73>; status = "disabled"; }; @@ -116,6 +134,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <74>; status = "disabled"; }; @@ -123,6 +144,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <44>; status = "disabled"; }; @@ -130,6 +154,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <45>; status = "disabled"; }; @@ -137,6 +164,9 @@ compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <46>; status = "disabled"; }; @@ -145,6 +175,9 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <70>; status = "disabled"; }; @@ -153,6 +186,9 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <71>; status = "disabled"; }; @@ -161,12 +197,18 @@ #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <30>; status = "disabled"; }; wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <91>; }; }; }; -- cgit