From 45e01f401a2a16a8d7ca910fe01c124451980bd8 Mon Sep 17 00:00:00 2001 From: Tuomas Tynkkynen Date: Fri, 22 Dec 2017 22:57:37 +0200 Subject: ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property Using the cd-inverted property is not useful when GPIOs are used as card detects since the polarity can be specified with the usual GPIO_ACTIVE_(HIGH|LOW) GPIO flags. It has also caused confusion for U-Boot developers, so migrate all sunxi boards away from cd-inverted. Signed-off-by: Tuomas Tynkkynen Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts') diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts index f3edf9ca435c..aab6c1720ef7 100644 --- a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -102,8 +102,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ - cd-inverted; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_LOW>; /* PA8 */ status = "okay"; }; -- cgit