From 2af0d93762e91d4496cc2e63761c70ae9f50f997 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 2 May 2014 02:56:33 +0400 Subject: ARM: shmobile: henninger: specify EXTAL frequency When creating the initial device tree for the Henninger board, I've overlooked that EXTAL frequency needs to be overridden there. The 'sh-sci' driver managed to work somehow but the SDHI driver that I've tried to enable just hanged with the default EXTAL frequency of 0... Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 6e67cea3104c..0a655231d531 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -35,6 +35,10 @@ }; }; +&extal_clk { + clock-frequency = <20000000>; +}; + &pfc { scif0_pins: serial0 { renesas,groups = "scif0_data_d"; -- cgit From 1299df03d7191ab4356c995dde8b912d3c8922e9 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 3 May 2014 21:04:34 +0400 Subject: ARM: shmobile: henninger: add SDHI0/2 DT support Define the Henninger board dependent part of the SDHI0/2 device nodes along with the necessary voltage regulators (note that the Vcc regulators are dummy -- they are required but don't actually exist on the board). Also, GPIOs have to be used for the CD and WP signals due to the SDHI driver constraints... Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 76 +++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 0a655231d531..2e45c06dd96b 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "r8a7791.dtsi" +#include / { model = "Henninger"; @@ -33,6 +34,50 @@ device_type = "memory"; reg = <2 0x00000000 0 0x40000000>; }; + + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi2: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &extal_clk { @@ -54,6 +99,16 @@ renesas,groups = "intc_irq0"; renesas,function = "intc"; }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; }; &scif0 { @@ -82,3 +137,24 @@ &sata0 { status = "okay"; }; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; -- cgit From f59838d448356feb4f0ce70785a49045d842c9c3 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 6 May 2014 02:45:31 +0400 Subject: ARM: shmobile: henninger: add QSPI DT support Define the Henninger board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 38 +++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 2e45c06dd96b..1d715a3a6bb5 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -109,6 +109,11 @@ renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; }; &scif0 { @@ -158,3 +163,36 @@ cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; -- cgit From 667366bff7c4d38c6efa60f2e32d13c26a58d7d4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 May 2014 00:47:59 +0400 Subject: ARM: shmobile: henninger: add MSIOF0 DT support Define the Henninger board dependent part of the MSIOF0 device node. Add device node for Renesas R2A11302FT PMIC for which no bindings exist yet. Based on the Koelsch MSIOF device tree patch by Geert Uytterhoeven. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-henninger.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index 1d715a3a6bb5..cc6d992e8db2 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -114,6 +114,12 @@ renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + msiof0_pins: spi1 { + renesas,groups = "msiof0_clk", "msiof0_sync", "msiof0_rx", + "msiof0_tx"; + renesas,function = "msiof0"; + }; }; &scif0 { @@ -196,3 +202,18 @@ }; }; }; + +&msiof0 { + pinctrl-0 = <&msiof0_pins>; + pinctrl-names = "default"; + + status = "okay"; + + pmic@0 { + compatible = "renesas,r2a11302ft"; + reg = <0>; + spi-max-frequency = <6000000>; + spi-cpol; + spi-cpha; + }; +}; -- cgit From 08ec67b50db7ca8c9077e67ca23850cdc5bfc716 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 7 May 2014 22:32:29 +0200 Subject: ARM: shmobile: r8a7740 dtsi: Add Ethernet support Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 9f659861f262..f0147890e5f9 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -123,6 +123,19 @@ 0 149 IRQ_TYPE_LEVEL_HIGH>; }; + ether: ethernet@e9a00000 { + compatible = "renesas,gether-r8a7740"; + reg = <0xe9a00000 0x800>, + <0xe9a01800 0x800>; + interrupt-parent = <&gic>; + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; + /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */ + phy-mode = "mii"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c0: i2c@fff20000 { #address-cells = <1>; #size-cells = <0>; -- cgit From 15d89dc9bfde872885c6226d86fb25676cbedfb3 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 7 May 2014 22:32:30 +0200 Subject: ARM: shmobile: armadillo-reference dts: Add Ethernet support Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 10344e6edd20..486007d7ffe4 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -158,6 +158,18 @@ }; }; +ðer { + pinctrl-0 = <ðer_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy0>; + status = "ok"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + &i2c0 { status = "okay"; touchscreen@55 { @@ -189,6 +201,11 @@ pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; + ether_pins: ether { + renesas,groups = "gether_mii", "gether_int"; + renesas,function = "gether"; + }; + scifa1_pins: serial1 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; -- cgit From 9ff254adc1e32db46000a33b8ecbc4d7047672be Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Wed, 30 Apr 2014 02:41:28 +0200 Subject: ARM: shmobile: dts: Move interrupt-parent property to root node There's no need to duplicate the interrupt-parent property in all DT nodes as the kernel automatically walks parent nodes to find the property. Specify it once in the root node only. Signed-off-by: Laurent Pinchart Acked-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a73a4.dtsi | 18 ------------------ arch/arm/boot/dts/r8a7740.dtsi | 12 +----------- arch/arm/boot/dts/r8a7778.dtsi | 18 +----------------- arch/arm/boot/dts/r8a7779.dtsi | 21 +-------------------- arch/arm/boot/dts/r8a7791.dtsi | 3 --- 5 files changed, 3 insertions(+), 69 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 62d0211bd192..82c5ac825386 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, <0 1 IRQ_TYPE_LEVEL_HIGH>, <0 2 IRQ_TYPE_LEVEL_HIGH>, @@ -95,7 +94,6 @@ #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0200 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, <0 33 IRQ_TYPE_LEVEL_HIGH>, <0 34 IRQ_TYPE_LEVEL_HIGH>, @@ -136,7 +134,6 @@ dma0: dma-controller@e6700020 { compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; - interrupt-parent = <&gic>; interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH 0 200 IRQ_TYPE_LEVEL_HIGH 0 201 IRQ_TYPE_LEVEL_HIGH @@ -171,7 +168,6 @@ compatible = "renesas,rcar-thermal"; reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; - interrupt-parent = <&gic>; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; @@ -180,7 +176,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -190,7 +185,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -200,7 +194,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -210,7 +203,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -220,7 +212,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -230,7 +221,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -240,7 +230,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -250,7 +239,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -260,7 +248,6 @@ #size-cells = <0>; compatible = "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; - interrupt-parent = <&gic>; interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -268,7 +255,6 @@ mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -277,7 +263,6 @@ mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; - interrupt-parent = <&gic>; interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; @@ -309,7 +294,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -318,7 +302,6 @@ sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; @@ -327,7 +310,6 @@ sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index f0147890e5f9..fbf47fbae3a0 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -14,6 +14,7 @@ / { compatible = "renesas,r8a7740"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -49,7 +50,6 @@ <0xe6900020 1>, <0xe6900040 1>, <0xe6900060 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -70,7 +70,6 @@ <0xe6900024 1>, <0xe6900044 1>, <0xe6900064 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -91,7 +90,6 @@ <0xe6900028 1>, <0xe6900048 1>, <0xe6900068 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -112,7 +110,6 @@ <0xe690002c 1>, <0xe690004c 1>, <0xe690006c 1>; - interrupt-parent = <&gic>; interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH 0 149 IRQ_TYPE_LEVEL_HIGH @@ -141,7 +138,6 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH 0 202 IRQ_TYPE_LEVEL_HIGH 0 203 IRQ_TYPE_LEVEL_HIGH @@ -154,7 +150,6 @@ #size-cells = <0>; compatible = "renesas,iic-r8a7740", "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; - interrupt-parent = <&gic>; interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH 0 71 IRQ_TYPE_LEVEL_HIGH 0 72 IRQ_TYPE_LEVEL_HIGH @@ -189,7 +184,6 @@ mmcif0: mmc@e6bd0000 { compatible = "renesas,mmcif-r8a7740", "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH 0 57 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; @@ -198,7 +192,6 @@ sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH 0 118 IRQ_TYPE_LEVEL_HIGH 0 119 IRQ_TYPE_LEVEL_HIGH>; @@ -210,7 +203,6 @@ sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH 0 122 IRQ_TYPE_LEVEL_HIGH 0 123 IRQ_TYPE_LEVEL_HIGH>; @@ -222,7 +214,6 @@ sdhi2: sd@e6870000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6870000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH 0 126 IRQ_TYPE_LEVEL_HIGH 0 127 IRQ_TYPE_LEVEL_HIGH>; @@ -235,7 +226,6 @@ #sound-dai-cells = <1>; compatible = "renesas,fsi2-r8a7740", "renesas,sh_fsi2"; reg = <0xfe1f0000 0x400>; - interrupt-parent = <&gic>; interrupts = <0 9 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 3c6fab5c9702..3af0a2187493 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -20,6 +20,7 @@ / { compatible = "renesas,r8a7778"; + interrupt-parent = <&gic>; cpus { cpu@0 { @@ -52,7 +53,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -63,7 +63,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -75,7 +74,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -87,7 +85,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -99,7 +96,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -111,7 +107,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -130,7 +125,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -140,7 +134,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -150,7 +143,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -160,7 +152,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7778"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -168,7 +159,6 @@ mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -176,7 +166,6 @@ sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -186,7 +175,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -196,7 +184,6 @@ sdhi2: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7778"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -206,7 +193,6 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-parent = <&gic>; interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -216,7 +202,6 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-parent = <&gic>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -226,7 +211,6 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7778", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-parent = <&gic>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 8b1a336ee401..b517c8e6b420 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -15,6 +15,7 @@ / { compatible = "renesas,r8a7779"; + interrupt-parent = <&gic>; cpus { #address-cells = <1>; @@ -59,7 +60,6 @@ gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -71,7 +71,6 @@ gpio1: gpio@ffc41000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -83,7 +82,6 @@ gpio2: gpio@ffc42000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -95,7 +93,6 @@ gpio3: gpio@ffc43000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -107,7 +104,6 @@ gpio4: gpio@ffc44000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -119,7 +115,6 @@ gpio5: gpio@ffc45000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -131,7 +126,6 @@ gpio6: gpio@ffc46000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; - interrupt-parent = <&gic>; interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; @@ -150,7 +144,6 @@ <0xfe780024 4>, <0xfe780044 4>, <0xfe780064 4>; - interrupt-parent = <&gic>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0 29 IRQ_TYPE_LEVEL_HIGH @@ -163,7 +156,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -173,7 +165,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -183,7 +174,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -193,7 +183,6 @@ #size-cells = <0>; compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; - interrupt-parent = <&gic>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -211,14 +200,12 @@ sata: sata@fc600000 { compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; - interrupt-parent = <&gic>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -228,7 +215,6 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -238,7 +224,6 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -248,7 +233,6 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; - interrupt-parent = <&gic>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; @@ -258,7 +242,6 @@ hspi0: spi@fffc7000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc7000 0x18>; - interrupt-parent = <&gic>; interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -268,7 +251,6 @@ hspi1: spi@fffc8000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc8000 0x18>; - interrupt-parent = <&gic>; interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -278,7 +260,6 @@ hspi2: spi@fffc6000 { compatible = "renesas,hspi-r8a7779", "renesas,hspi"; reg = <0xfffc6000 0x18>; - interrupt-parent = <&gic>; interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 98baff48e6ce..f4d47e18732a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -289,7 +289,6 @@ sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee100000 0 0x200>; - interrupt-parent = <&gic>; interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI0>; status = "disabled"; @@ -298,7 +297,6 @@ sdhi1: sd@ee140000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee140000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI1>; status = "disabled"; @@ -307,7 +305,6 @@ sdhi2: sd@ee160000 { compatible = "renesas,sdhi-r8a7791"; reg = <0 0xee160000 0 0x100>; - interrupt-parent = <&gic>; interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp3_clks R8A7791_CLK_SDHI2>; status = "disabled"; -- cgit From 81f6883f0b1bbb1dbca34cc65257f823acb55cbd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 23 Apr 2014 10:25:27 +0200 Subject: ARM: shmobile: r8a7790 dtsi: Add GPIO clocks Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index bf2db38eade1..e6130d6ff28e 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -117,6 +117,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -128,6 +129,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -139,6 +141,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -150,6 +153,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -161,6 +165,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -172,6 +177,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7790_CLK_GPIO5>; }; thermal@e61f0000 { @@ -802,14 +808,19 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < + R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3 + R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0 R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0 >; clock-output-names = + "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", "rcan1", "rcan0", "qspi_mod", "iic3", "i2c3", "i2c2", "i2c1", "i2c0"; }; -- cgit From 4faf9c5e56d1326067f5faca551eb67ecf76696c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 23 Apr 2014 10:25:28 +0200 Subject: ARM: shmobile: r8a7791 dtsi: Add GPIO clocks Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index f4d47e18732a..5eea08fb3722 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -76,6 +76,7 @@ gpio-ranges = <&pfc 0 0 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO0>; }; gpio1: gpio@e6051000 { @@ -87,6 +88,7 @@ gpio-ranges = <&pfc 0 32 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO1>; }; gpio2: gpio@e6052000 { @@ -98,6 +100,7 @@ gpio-ranges = <&pfc 0 64 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO2>; }; gpio3: gpio@e6053000 { @@ -109,6 +112,7 @@ gpio-ranges = <&pfc 0 96 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO3>; }; gpio4: gpio@e6054000 { @@ -120,6 +124,7 @@ gpio-ranges = <&pfc 0 128 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO4>; }; gpio5: gpio@e6055000 { @@ -131,6 +136,7 @@ gpio-ranges = <&pfc 0 160 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO5>; }; gpio6: gpio@e6055400 { @@ -142,6 +148,7 @@ gpio-ranges = <&pfc 0 192 32>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO6>; }; gpio7: gpio@e6055800 { @@ -153,6 +160,7 @@ gpio-ranges = <&pfc 0 224 26>; #interrupt-cells = <2>; interrupt-controller; + clocks = <&mstp9_clks R8A7791_CLK_GPIO7>; }; thermal@e61f0000 { @@ -802,18 +810,23 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, <&hp_clk>, <&cp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; renesas,clock-indices = < + R8A7791_CLK_GPIO7 R8A7791_CLK_GPIO6 R8A7791_CLK_GPIO5 R8A7791_CLK_GPIO4 + R8A7791_CLK_GPIO3 R8A7791_CLK_GPIO2 R8A7791_CLK_GPIO1 R8A7791_CLK_GPIO0 R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD R8A7791_CLK_I2C5 R8A7791_CLK_IICDVFS R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 >; clock-output-names = - "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", - "i2c2", "i2c1", "i2c0"; + "gpio7", "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0", + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", + "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; -- cgit From c9af5428be0cea61a34fa8d5dda83d4c57a03b06 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Wed, 15 May 2013 11:57:30 +0900 Subject: ARM: shmobile: marzen-reference: Set SMSC lan to use irq-push-pull This change makes the DTS consistent with the platform data that exists in board-marzen.c. Empirically it does not appear to be necessary. Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779-marzen-reference.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index 76f5eef7d1cc..b27c6373ff4d 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -45,6 +45,7 @@ phy-mode = "mii"; interrupt-parent = <&irqpin0>; interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; -- cgit From 3fa3985e624aea24334abc9a33b484c3d316e64e Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 14 May 2014 16:41:12 +0200 Subject: ARM: shmobile: r8a7740 dtsi: Remove duplicate interrupt-parent property Caused by interaction between commit 08ec67b50db7ca8c9077e67ca23850cdc5bfc716 ("ARM: shmobile: r8a7740 dtsi: Add Ethernet support") and commit 9ff254adc1e32db46000a33b8ecbc4d7047672be ("ARM: shmobile: dts: Move interrupt-parent property to root node"). Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7740.dtsi | 1 - 1 file changed, 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index fbf47fbae3a0..5d2edd83b572 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -124,7 +124,6 @@ compatible = "renesas,gether-r8a7740"; reg = <0xe9a00000 0x800>, <0xe9a01800 0x800>; - interrupt-parent = <&gic>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; /* clocks = <&mstp3_clks R8A7740_CLK_GETHER>; */ phy-mode = "mii"; -- cgit