From 2d3c8ba3cffa00f76bedb713c8c2126c82d8cd13 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 23 Sep 2019 10:32:38 -0700 Subject: ARM: dts: Fix wrong clocks for dra7 mcasp The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7. This causes the following warning on beagle-x15: ti-sysc 48468000.target-module: could not add child clock ahclkr: -19 Also the mcasp clkctrl clock bits are wrong: For mcasp1 and 2 we have four clocks at bits 28, 24, 22 and 0: bit 28 is ahclkr bit 24 is ahclkx bit 22 is auxclk bit 0 is fck For mcasp3 to 8 we have three clocks at bits 24, 22 and 0. bit 24 is ahclkx bit 22 is auxclk bit 0 is fck We do not have currently mapped auxclk at bit 22 for the drivers, that can be added if needed. Fixes: 5241ccbf2819 ("ARM: dts: Add missing ranges for dra7 mcasp l3 ports") Cc: Suman Anna Cc: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-l4.dtsi | 48 ++++++++++++++++++------------------------ 1 file changed, 21 insertions(+), 27 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi index 21e5914fdd62..099d6fe2a57a 100644 --- a/arch/arm/boot/dts/dra7-l4.dtsi +++ b/arch/arm/boot/dts/dra7-l4.dtsi @@ -2762,7 +2762,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>; dma-names = "tx", "rx"; - clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 22>, + clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; @@ -2799,8 +2799,8 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 22>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>, + <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>, <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>; clock-names = "fck", "ahclkx", "ahclkr"; status = "disabled"; @@ -2818,9 +2818,8 @@ ; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x68000 0x2000>, @@ -2836,7 +2835,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2854,9 +2853,8 @@ ; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x6c000 0x2000>, @@ -2872,7 +2870,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2890,9 +2888,8 @@ ; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x70000 0x2000>, @@ -2908,7 +2905,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2926,9 +2923,8 @@ ; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x74000 0x2000>, @@ -2944,7 +2940,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2962,9 +2958,8 @@ ; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x78000 0x2000>, @@ -2980,7 +2975,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; @@ -2998,9 +2993,8 @@ ; /* Domains (P, C): l4per_pwrdm, l4per2_clkdm */ clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>, - <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 28>; - clock-names = "fck", "ahclkx", "ahclkr"; + <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; + clock-names = "fck", "ahclkx"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x7c000 0x2000>, @@ -3016,7 +3010,7 @@ interrupt-names = "tx", "rx"; dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>; dma-names = "tx", "rx"; - clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 22>, + clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>, <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>; clock-names = "fck", "ahclkx"; status = "disabled"; -- cgit From f1f028ff89cb0d37db299d48e7b2ce19be040d52 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Fri, 20 Sep 2019 18:11:15 +0200 Subject: DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again commit 6953c57ab172 "gpio: of: Handle SPI chipselect legacy bindings" did introduce logic to centrally handle the legacy spi-cs-high property in combination with cs-gpios. This assumes that the polarity of the CS has to be inverted if spi-cs-high is missing, even and especially if non-legacy GPIO_ACTIVE_HIGH is specified. The DTS for the GTA04 was orginally introduced under the assumption that there is no need for spi-cs-high if the gpio is defined with proper polarity GPIO_ACTIVE_HIGH. This was not a problem until gpiolib changed the interpretation of GPIO_ACTIVE_HIGH and missing spi-cs-high. The effect is that the missing spi-cs-high is now interpreted as CS being low (despite GPIO_ACTIVE_HIGH) which turns off the SPI interface when the panel is to be programmed by the panel driver. Therefore, we have to add the redundant and legacy spi-cs-high property to properly activate CS. Cc: stable@vger.kernel.org Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-gta04.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b295f6fad2a5..954c216140ad 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -120,6 +120,7 @@ spi-max-frequency = <100000>; spi-cpol; spi-cpha; + spi-cs-high; backlight= <&backlight>; label = "lcd"; -- cgit From 4ef5d76b453908f21341e661a9b6f96862f6f589 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 24 Sep 2019 09:24:28 -0700 Subject: ARM: dts: Fix gpio0 flags for am335x-icev2 The ti,no-idle-on-init and ti,no-reset-on-init flags need to be at the interconnect target module level for the modules that have it defined. Otherwise we get the following warnings: dts flag should be at module level for ti,no-idle-on-init dts flag should be at module level for ti,no-reset-on-init Fixes: 87fc89ced3a7 ("ARM: dts: am335x: Move l4 child devices to probe them with ti-sysc") Cc: Lokesh Vutla Reported-by: Suman Anna Reviewed-by: Lokesh Vutla Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-icev2.dts | 2 +- arch/arm/boot/dts/am33xx-l4.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts index 18f70b35da4c..204bccfcc110 100644 --- a/arch/arm/boot/dts/am335x-icev2.dts +++ b/arch/arm/boot/dts/am335x-icev2.dts @@ -432,7 +432,7 @@ pinctrl-0 = <&mmc0_pins_default>; }; -&gpio0 { +&gpio0_target { /* Do not idle the GPIO used for holding the VTT regulator */ ti,no-reset-on-init; ti,no-idle-on-init; diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 46849d6ecb3e..1515f4f91499 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -127,7 +127,7 @@ ranges = <0x0 0x5000 0x1000>; }; - target-module@7000 { /* 0x44e07000, ap 14 20.0 */ + gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; ti,hwmods = "gpio1"; reg = <0x7000 0x4>, -- cgit From 17529d43b21c72466e9109d602c6f5c360a1a9e8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 24 Sep 2019 09:25:51 -0700 Subject: ARM: OMAP2+: Add missing LCDC midlemode for am335x TRM "Table 13-34. SYSCONFIG Register Field Descriptions" lists both standbymode and idlemode that should be just the sidle and midle registers where midle is currently unconfigured for lcdc_sysc. As the dts data has been generated based on lcdc_sysc, we now have an empty "ti,sysc-midle" property. And so we currently get a warning for lcdc because of a difference with dts provided configuration compared to the legacy platform data. This is because lcdc has SYSC_HAS_MIDLEMODE configured in the platform data without configuring the modes. Let's fix the issue by adding the missing midlemode to lcdc_sysc, and configuring the "ti,sysc-midle" property based on the TRM values. Fixes: f711c575cfec ("ARM: dts: am335x: Add l4 interconnect hierarchy and ti-sysc data") Cc: Jyri Sarha Cc: Keerthy Cc: Robert Nelson Cc: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am33xx-l4.dtsi | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 1515f4f91499..3287cf695b5a 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -2038,7 +2038,9 @@ reg = <0xe000 0x4>, <0xe054 0x4>; reg-names = "rev", "sysc"; - ti,sysc-midle ; + ti,sysc-midle = , + , + ; ti,sysc-sidle = , , ; -- cgit From f90ec6cdf674248dcad85bf9af6e064bf472b841 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 30 Sep 2019 11:54:50 +0300 Subject: ARM: dts: am4372: Set memory bandwidth limit for DISPC Set memory bandwidth limit to filter out resolutions above 720p@60Hz to avoid underflow errors due to the bandwidth needs of higher resolutions. am43xx can not provide enough bandwidth to DISPC to correctly handle 'high' resolutions. Signed-off-by: Peter Ujfalusi Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am4372.dtsi | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 848e2a8884e2..14bbc438055f 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -337,6 +337,8 @@ ti,hwmods = "dss_dispc"; clocks = <&disp_clk>; clock-names = "fck"; + + max-memory-bandwidth = <230000000>; }; rfbi: rfbi@4832a800 { -- cgit From cdee3b60af594403bd389e6e8239bcd0b4a159fc Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 1 Oct 2019 09:46:28 +0200 Subject: ARM: dts: ux500: Fix up the CPU thermal zone This fixes up the default ux500 CPU thermal zone: - Set polling delay to 0 and explain why - Set passive polling delay to 250 - Remove restrictions from the CPU cooling device, we should use all cpufreq steps to cool down if needed. Link: https://lore.kernel.org/r/20191001074628.8122-1-linus.walleij@linaro.org Fixes: b786a05f6ce4 ("ARM: dts: ux500: Update thermal zone") Suggested-by: Daniel Lezcano Signed-off-by: Linus Walleij Reviewed-by: Daniel Lezcano Signed-off-by: Olof Johansson --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index a53657b83288..bda454d12150 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -8,6 +8,7 @@ #include #include #include +#include / { #address-cells = <1>; @@ -59,8 +60,12 @@ * cooling. */ cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; + polling-delay-passive = <250>; + /* + * This sensor fires interrupts to update the thermal + * zone, so no polling is needed. + */ + polling-delay = <0>; thermal-sensors = <&thermal>; @@ -79,7 +84,7 @@ cooling-maps { trip = <&cpu_alert>; - cooling-device = <&CPU0 0 2>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; contribution = <100>; }; }; -- cgit From e6064cf4dafd75240ec7f512abfd5a63da9fce24 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Wed, 2 Oct 2019 13:26:50 +0200 Subject: ARM: dts: sunxi: Revert phy-names removal for ECHI and OHCI This reverts commits 3d109bdca981 ("ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI"), 0a3df8bb6dad ("ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI") and 3c7ab90aaa28 ("arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI"). It turns out that while the USB bindings were not mentionning it, the PHY client bindings were mandating that phy-names is set when phys is. Let's add it back. Fixes: 3d109bdca981 ("ARM: dts: sunxi: Remove useless phy-names from EHCI and OHCI") Fixes: 0a3df8bb6dad ("ARM: dts: sunxi: h3/h5: Remove useless phy-names from EHCI and OHCI") Fixes: 3c7ab90aaa28 ("arm64: dts: allwinner: Remove useless phy-names from EHCI and OHCI") Reported-by: Emmanuel Vadot Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20191002112651.100504-1-mripard@kernel.org Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/sun4i-a10.dtsi | 4 ++++ arch/arm/boot/dts/sun5i.dtsi | 2 ++ arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++++ arch/arm/boot/dts/sun7i-a20.dtsi | 4 ++++ arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 ++ arch/arm/boot/dts/sun8i-a83t.dtsi | 3 +++ arch/arm/boot/dts/sun8i-r40.dtsi | 4 ++++ arch/arm/boot/dts/sun9i-a80.dtsi | 5 +++++ arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 ++++++ 9 files changed, 34 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index ce823c44e98a..4c268b70b735 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -520,6 +520,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -529,6 +530,7 @@ interrupts = <64>; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -608,6 +610,7 @@ interrupts = <40>; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -617,6 +620,7 @@ interrupts = <65>; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index cfb1efc8828c..6befa236ba99 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -391,6 +391,7 @@ interrupts = <39>; clocks = <&ccu CLK_AHB_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -400,6 +401,7 @@ interrupts = <40>; clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index bbeb743633c6..ac7638078420 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -545,6 +545,7 @@ clocks = <&ccu CLK_AHB1_EHCI0>; resets = <&ccu RST_AHB1_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -555,6 +556,7 @@ clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_AHB1_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -565,6 +567,7 @@ clocks = <&ccu CLK_AHB1_EHCI1>; resets = <&ccu RST_AHB1_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -575,6 +578,7 @@ clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_AHB1_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 49380de754a9..874231be04e4 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -623,6 +623,7 @@ interrupts = ; clocks = <&ccu CLK_AHB_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -632,6 +633,7 @@ interrupts = ; clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -714,6 +716,7 @@ interrupts = ; clocks = <&ccu CLK_AHB_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -723,6 +726,7 @@ interrupts = ; clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 52eed0ae3607..f292f96ab39b 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -307,6 +307,7 @@ clocks = <&ccu CLK_BUS_EHCI>; resets = <&ccu RST_BUS_EHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -317,6 +318,7 @@ clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>; resets = <&ccu RST_BUS_OHCI>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi index 523be6611c50..74bb053cf23c 100644 --- a/arch/arm/boot/dts/sun8i-a83t.dtsi +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi @@ -632,6 +632,7 @@ clocks = <&ccu CLK_BUS_EHCI0>; resets = <&ccu RST_BUS_EHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -643,6 +644,7 @@ clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>; resets = <&ccu RST_BUS_OHCI0>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -654,6 +656,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi index bde068111b85..c9c2688db66d 100644 --- a/arch/arm/boot/dts/sun8i-r40.dtsi +++ b/arch/arm/boot/dts/sun8i-r40.dtsi @@ -273,6 +273,7 @@ clocks = <&ccu CLK_BUS_EHCI1>; resets = <&ccu RST_BUS_EHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -284,6 +285,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -294,6 +296,7 @@ clocks = <&ccu CLK_BUS_EHCI2>; resets = <&ccu RST_BUS_EHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -305,6 +308,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index c34d505c7efe..b9b6fb00be28 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -346,6 +346,7 @@ clocks = <&usb_clocks CLK_BUS_HCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -357,6 +358,7 @@ <&usb_clocks CLK_USB_OHCI0>; resets = <&usb_clocks RST_USB0_HCI>; phys = <&usbphy1>; + phy-names = "usb"; status = "disabled"; }; @@ -378,6 +380,7 @@ clocks = <&usb_clocks CLK_BUS_HCI1>; resets = <&usb_clocks RST_USB1_HCI>; phys = <&usbphy2>; + phy-names = "usb"; status = "disabled"; }; @@ -407,6 +410,7 @@ clocks = <&usb_clocks CLK_BUS_HCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; @@ -418,6 +422,7 @@ <&usb_clocks CLK_USB_OHCI2>; resets = <&usb_clocks RST_USB2_HCI>; phys = <&usbphy3>; + phy-names = "usb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi index eba190b3f9de..107eeafad20a 100644 --- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -304,6 +304,7 @@ clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -315,6 +316,7 @@ <&ccu CLK_USB_OHCI1>; resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; phys = <&usbphy 1>; + phy-names = "usb"; status = "disabled"; }; @@ -325,6 +327,7 @@ clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -336,6 +339,7 @@ <&ccu CLK_USB_OHCI2>; resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; phys = <&usbphy 2>; + phy-names = "usb"; status = "disabled"; }; @@ -346,6 +350,7 @@ clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; @@ -357,6 +362,7 @@ <&ccu CLK_USB_OHCI3>; resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; phys = <&usbphy 3>; + phy-names = "usb"; status = "disabled"; }; -- cgit From 6b512b0ee091edcb8e46218894e4c917d919d3dc Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 16 Aug 2019 17:58:12 -0500 Subject: ARM: dts: logicpd-torpedo-som: Remove twl_keypad The TWL4030 used on the Logit PD Torpedo SOM does not have the keypad pins routed. This patch disables the twl_keypad driver to remove some splat during boot: twl4030_keypad 48070000.i2c:twl@48:keypad: missing or malformed property linux,keymap: -22 twl4030_keypad 48070000.i2c:twl@48:keypad: Failed to build keymap twl4030_keypad: probe of 48070000.i2c:twl@48:keypad failed with error -22 Signed-off-by: Adam Ford [tony@atomide.com: removed error time stamps] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 3fdd0a72f87f..506b118e511a 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -192,3 +192,7 @@ &twl_gpio { ti,use-leds; }; + +&twl_keypad { + status = "disabled"; +}; -- cgit From cf03c691eb959f438c16d58ffd11f150b1a95b1e Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 3 Oct 2019 17:48:42 +0200 Subject: ARM: dts: sun7i: Drop the module clock from the device tree What we thought would be the module clock is actually the clock meant to be used by the sensors, and play no role in the CSI controller. Now that the binding has been updated to reflect that, let's update the device tree too. Fixes: d2b9c6444301 ("ARM: dts: sun7i: Add CSI0 controller") Reported-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 49380de754a9..31631a3504c0 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -380,9 +380,8 @@ compatible = "allwinner,sun7i-a20-csi0"; reg = <0x01c09000 0x1000>; interrupts = ; - clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI0>, - <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; - clock-names = "bus", "mod", "isp", "ram"; + clocks = <&ccu CLK_AHB_CSI0>, <&ccu CLK_CSI_SCLK>, <&ccu CLK_DRAM_CSI0>; + clock-names = "bus", "isp", "ram"; resets = <&ccu RST_CSI0>; status = "disabled"; }; -- cgit From 734a9b21bb061acdbb0b9c08cd37f80368f381dd Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 8 Oct 2019 10:56:42 +0300 Subject: ARM: dts: omap5: fix gpu_cm clock provider name The clkctrl code searches for the parent clockdomain based on the name of the CM provider node. The introduction of SGX node for omap5 made the node name for the gpu_cm to be clock-controller. There is no clockdomain named like this, so the lookup fails. Fix by changing the node name properly. Fixes: 394534cb07d8 ("ARM: dts: Configure sgx for omap5") Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap54xx-clocks.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi b/arch/arm/boot/dts/omap54xx-clocks.dtsi index fac2e57dcca9..4791834dacb2 100644 --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi @@ -1146,7 +1146,7 @@ }; }; - gpu_cm: clock-controller@1500 { + gpu_cm: gpu_cm@1500 { compatible = "ti,omap4-cm"; reg = <0x1500 0x100>; #address-cells = <1>; -- cgit From 647c8977e111c0a62c93a489ebc4b045c833fdb4 Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Thu, 3 Oct 2019 18:45:48 -0700 Subject: ARM: dts: am3874-iceboard: Fix 'i2c-mux-idle-disconnect' usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt, i2c-mux-idle-disconnect is a property of a parent node since it pertains to the mux/switch as a whole, so move it there and drop all of the concurrences in child nodes. Fixes: d031773169df ("ARM: dts: Adds device tree file for McGill's IceBoard, based on TI AM3874") Signed-off-by: Andrey Smirnov Cc: Benoît Cousson Cc: Tony Lindgren Cc: Graeme Smecher Cc: linux-omap@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Graeme Smecher Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am3874-iceboard.dts | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts index 883fb85135d4..1b4b2b0500e4 100644 --- a/arch/arm/boot/dts/am3874-iceboard.dts +++ b/arch/arm/boot/dts/am3874-iceboard.dts @@ -111,13 +111,13 @@ reg = <0x70>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; i2c@0 { /* FMC A */ #address-cells = <1>; #size-cells = <0>; reg = <0>; - i2c-mux-idle-disconnect; }; i2c@1 { @@ -125,7 +125,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <1>; - i2c-mux-idle-disconnect; }; i2c@2 { @@ -133,7 +132,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <2>; - i2c-mux-idle-disconnect; }; i2c@3 { @@ -141,7 +139,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <3>; - i2c-mux-idle-disconnect; }; i2c@4 { @@ -149,14 +146,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <4>; - i2c-mux-idle-disconnect; }; i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; - i2c-mux-idle-disconnect; ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; }; ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; }; @@ -182,14 +177,12 @@ #address-cells = <1>; #size-cells = <0>; reg = <6>; - i2c-mux-idle-disconnect; }; i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; - i2c-mux-idle-disconnect; u41: pca9575@20 { compatible = "nxp,pca9575"; -- cgit From 087a2b7ec973f6f30f6e7b72cb50b6f7734ffdd2 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 Oct 2019 15:11:27 -0700 Subject: ARM: dts: Use level interrupt for omap4 & 5 wlcore Commit 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt") changed wlcore interrupts to use edge interrupt based on what's specified in the wl1835mod.pdf data sheet. However, there are still cases where we can have lost interrupts as described in omap_gpio_unidle(). And using a level interrupt instead of edge interrupt helps as we avoid the check for untriggered GPIO interrupts in omap_gpio_unidle(). And with commit e6818d29ea15 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup") GPIOs idle just fine with level interrupts. Let's change omap4 and 5 wlcore users back to using level interrupt instead of edge interrupt. Let's not change the others as I've only seen this on omap4 and 5, probably because the other SoCs don't have l4per idle independent of the CPUs. Fixes: 572cf7d7b07d ("ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt") Depends-on: e6818d29ea15 ("gpio: gpio-omap: configure edge detection for level IRQs for idle wakeup") Cc: Anders Roxell Cc: Eyal Reizer Cc: Guy Mishol Cc: John Stultz Cc: Ulf Hansson Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4-droid4-xt894.dts | 2 +- arch/arm/boot/dts/omap4-panda-common.dtsi | 2 +- arch/arm/boot/dts/omap4-sdp.dts | 2 +- arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi | 2 +- arch/arm/boot/dts/omap5-board-common.dtsi | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts index 4454449de00c..a40fe8d49da6 100644 --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts @@ -369,7 +369,7 @@ compatible = "ti,wl1285", "ti,wl1283"; reg = <2>; /* gpio_100 with gpmc_wait2 pad as wakeirq */ - interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&gpio4 4 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x4e>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <26000000>; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index 14be2ecb62b1..55ea8b6189af 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -474,7 +474,7 @@ compatible = "ti,wl1271"; reg = <2>; /* gpio_53 with gpmc_ncs3 pad as wakeup */ - interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_RISING>, + interrupts-extended = <&gpio2 21 IRQ_TYPE_LEVEL_HIGH>, <&omap4_pmx_core 0x3a>; interrupt-names = "irq", "wakeup"; ref-clock-frequency = <38400000>; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 3c274965ff40..91480ac1f328 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -512,7 +512,7 @@ compatible = "ti,wl1281"; reg = <2>; interrupt-parent = <&gpio1>; - interrupts = <21 IRQ_TYPE_EDGE_RISING>; /* gpio 53 */ + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; /* gpio 53 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 6dbbc9b3229c..d0032213101e 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -69,7 +69,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio2>; - interrupts = <9 IRQ_TYPE_EDGE_RISING>; /* gpio 41 */ + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; /* gpio 41 */ ref-clock-frequency = <38400000>; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7fff555ee394..68ac04641bdb 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -362,7 +362,7 @@ pinctrl-names = "default"; pinctrl-0 = <&wlcore_irq_pin>; interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_EDGE_RISING>; /* gpio 14 */ + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ ref-clock-frequency = <26000000>; }; }; -- cgit From 52f4d4043d1edc4e9e66ec79cae3e32cfe0e44d6 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 1 Oct 2019 19:20:29 -0500 Subject: ARM: dts: imx6q-logicpd: Re-Enable SNVS power key A previous patch disabled the SNVS power key by default which breaks the ability for the imx6q-logicpd board to wake from sleep. This patch re-enables this feature for this board. Fixes: 770856f0da5d ("ARM: dts: imx6qdl: Enable SNVS power key according to board design") Signed-off-by: Adam Ford Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6-logicpd-som.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi index 7ceae3573248..547fb141ec0c 100644 --- a/arch/arm/boot/dts/imx6-logicpd-som.dtsi +++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi @@ -207,6 +207,10 @@ vin-supply = <&sw1c_reg>; }; +&snvs_poweroff { + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; -- cgit From 71936a6d18c33c63b4e9e0359fb987306cbe9fae Mon Sep 17 00:00:00 2001 From: Andrey Smirnov Date: Thu, 3 Oct 2019 22:41:15 -0700 Subject: ARM: dts: vf610-zii-scu4-aib: Specify 'i2c-mux-idle-disconnect' Specify 'i2c-mux-idle-disconnect' for both I2C switches present on the board, since both are connected to the same parent bus and all of their children have the same I2C address. Fixes: ca4b4d373fcc ("ARM: dts: vf610: Add ZII SCU4 AIB board") Signed-off-by: Andrey Smirnov Cc: Shawn Guo Cc: Chris Healy Cc: Cory Tusar Cc: Jeff White Cc: Rick Ramstetter Cc: Lucas Stach Cc: Fabio Estevam Cc: linux-arm-kernel@lists.infradead.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Tested-by: Chris Healy Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-zii-scu4-aib.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts index dc8a5f37a1ef..c8ebb23c4e02 100644 --- a/arch/arm/boot/dts/vf610-zii-scu4-aib.dts +++ b/arch/arm/boot/dts/vf610-zii-scu4-aib.dts @@ -602,6 +602,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x70>; + i2c-mux-idle-disconnect; sff0_i2c: i2c@1 { #address-cells = <1>; @@ -640,6 +641,7 @@ reg = <0x71>; #address-cells = <1>; #size-cells = <0>; + i2c-mux-idle-disconnect; sff5_i2c: i2c@1 { #address-cells = <1>; -- cgit From 252b9e21bcf46b0d16f733f2e42b21fdc60addee Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Mon, 7 Oct 2019 08:43:42 +0800 Subject: ARM: dts: imx7s: Correct GPT's ipg clock source i.MX7S/D's GPT ipg clock should be from GPT clock root and controlled by CCM's GPT CCGR, using correct clock source for GPT ipg clock instead of IMX7D_CLK_DUMMY. Fixes: 3ef79ca6bd1d ("ARM: dts: imx7d: use imx7s.dtsi as base device tree") Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7s.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 710f850e785c..e2e604d6ba0b 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -448,7 +448,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT1_ROOT_CLK>, <&clks IMX7D_GPT1_ROOT_CLK>; clock-names = "ipg", "per"; }; @@ -457,7 +457,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302e0000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT2_ROOT_CLK>, <&clks IMX7D_GPT2_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; @@ -467,7 +467,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302f0000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT3_ROOT_CLK>, <&clks IMX7D_GPT3_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; @@ -477,7 +477,7 @@ compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x30300000 0x10000>; interrupts = ; - clocks = <&clks IMX7D_CLK_DUMMY>, + clocks = <&clks IMX7D_GPT4_ROOT_CLK>, <&clks IMX7D_GPT4_ROOT_CLK>; clock-names = "ipg", "per"; status = "disabled"; -- cgit From 9786340acaa33b3722925125e2df358d14b8ee12 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Mon, 23 Sep 2019 20:21:22 +0200 Subject: ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci The commit e7774049ff25 ("ARM: dts: bcm283x: Define MMC interfaces at board level") accidently dropped the bus width for the sdhci on the RPi Zero W, because the board file was relying on the defaults from bcm2835-rpi.dtsi. So fix this performance regression by adding the bus width to the board file. Fixes: e7774049ff25 ("ARM: dts: bcm283x: Define MMC interfaces at board level") Reported-by: Phil Elwell Signed-off-by: Stefan Wahren Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 09a088f98566..b75af21069f9 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -113,6 +113,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>; + bus-width = <4>; mmc-pwrseq = <&wifi_pwrseq>; non-removable; status = "okay"; -- cgit From 2618500dd370da413cb1f616111e1bd8d9f5f94f Mon Sep 17 00:00:00 2001 From: MarkLee Date: Mon, 14 Oct 2019 15:15:18 +0800 Subject: arm: dts: mediatek: Update mt7629 dts to reflect the latest dt-binding * Removes mediatek,physpeed property from dtsi that is useless in PHYLINK * Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit. * Set gmac1 to gmii mode that connect to a internal gphy Signed-off-by: MarkLee Signed-off-by: David S. Miller --- arch/arm/boot/dts/mt7629-rfb.dts | 13 ++++++++++++- arch/arm/boot/dts/mt7629.dtsi | 2 -- 2 files changed, 12 insertions(+), 3 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/mt7629-rfb.dts b/arch/arm/boot/dts/mt7629-rfb.dts index 3621b7d2b22a..9980c10c6e29 100644 --- a/arch/arm/boot/dts/mt7629-rfb.dts +++ b/arch/arm/boot/dts/mt7629-rfb.dts @@ -66,9 +66,21 @@ pinctrl-1 = <&ephy_leds_pins>; status = "okay"; + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + phy-mode = "2500base-x"; + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; + gmac1: mac@1 { compatible = "mediatek,eth-mac"; reg = <1>; + phy-mode = "gmii"; phy-handle = <&phy0>; }; @@ -78,7 +90,6 @@ phy0: ethernet-phy@0 { reg = <0>; - phy-mode = "gmii"; }; }; }; diff --git a/arch/arm/boot/dts/mt7629.dtsi b/arch/arm/boot/dts/mt7629.dtsi index 9608bc2ccb3f..867b88103b9d 100644 --- a/arch/arm/boot/dts/mt7629.dtsi +++ b/arch/arm/boot/dts/mt7629.dtsi @@ -468,14 +468,12 @@ compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b128000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; sgmiisys1: syscon@1b130000 { compatible = "mediatek,mt7629-sgmiisys", "syscon"; reg = <0x1b130000 0x3000>; #clock-cells = <1>; - mediatek,physpeed = "2500"; }; }; }; -- cgit From 626c45d223e22090511acbfb481e0ece1de1356d Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 13 Oct 2019 12:53:23 +0200 Subject: ARM: dts: bcm2837-rpi-cm3: Avoid leds-gpio probing issue bcm2835-rpi.dtsi defines the behavior of the ACT LED, which is available on all Raspberry Pi boards. But there is no driver for this particual GPIO on CM3 in mainline yet, so this node was left incomplete without the actual GPIO definition. Since commit 025bf37725f1 ("gpio: Fix return value mismatch of function gpiod_get_from_of_node()") this causing probe issues of the leds-gpio driver for users of the CM3 dtsi file. leds-gpio: probe of leds failed with error -2 Until we have the necessary GPIO driver hide the ACT node for CM3 to avoid this. Reported-by: Fredrik Yhlen Signed-off-by: Stefan Wahren Fixes: a54fe8a6cf66 ("ARM: dts: add Raspberry Pi Compute Module 3 and IO board") Cc: Linus Walleij Cc: Krzysztof Kozlowski Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi index 7c3cb7ece6cb..925cb37c22f0 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi +++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi @@ -9,6 +9,14 @@ reg = <0 0x40000000>; }; + leds { + /* + * Since there is no upstream GPIO driver yet, + * remove the incomplete node. + */ + /delete-node/ act; + }; + reg_3v3: fixed-regulator { compatible = "regulator-fixed"; regulator-name = "3V3"; -- cgit From 86ec2e1739aa1d6565888b4b2059fa47354e1a89 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Fri, 25 Oct 2019 15:01:22 +0200 Subject: ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157 Relax qspi pins slew-rate to minimize peak currents. Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board") Link: https://lore.kernel.org/r/20191025130122.11407-1-alexandre.torgue@st.com Signed-off-by: Patrice Chotard Signed-off-by: Alexandre Torgue Signed-off-by: Olof Johansson --- arch/arm/boot/dts/stm32mp157-pinctrl.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/arm/boot/dts') diff --git a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi index e4a0d51ec3a8..0a3a7d66737b 100644 --- a/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi +++ b/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi @@ -609,13 +609,13 @@ ; /* QSPI_BK1_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = ; /* QSPI_BK1_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; @@ -637,13 +637,13 @@ ; /* QSPI_BK2_IO3 */ bias-disable; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; pins2 { pinmux = ; /* QSPI_BK2_NCS */ bias-pull-up; drive-push-pull; - slew-rate = <3>; + slew-rate = <1>; }; }; -- cgit