From 42bc4fafe359ed6b73602b7a2dba0dd99588f8ce Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Sat, 17 Sep 2022 02:07:33 +0200 Subject: net: mt7531: only do PLL once after the reset Move the PLL init of the switch out of the pad configuration of the port 6 (usally cpu port). Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for outbound traffic on port 5 or port 6. Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Cc: stable@vger.kernel.org Signed-off-by: Alexander Couzens Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 835807911be0..95a57aeb466e 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -506,14 +506,19 @@ static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv) static int mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) { - struct mt7530_priv *priv = ds->priv; + return 0; +} + +static void +mt7531_pll_setup(struct mt7530_priv *priv) +{ u32 top_sig; u32 hwstrap; u32 xtal; u32 val; if (mt7531_dual_sgmii_supported(priv)) - return 0; + return; val = mt7530_read(priv, MT7531_CREV); top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); @@ -592,8 +597,6 @@ mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) val |= EN_COREPLL; mt7530_write(priv, MT7531_PLLGP_EN, val); usleep_range(25, 35); - - return 0; } static void @@ -2331,6 +2334,8 @@ mt7531_setup(struct dsa_switch *ds) SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); + mt7531_pll_setup(priv); + if (mt7531_dual_sgmii_supported(priv)) { priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII; @@ -2887,8 +2892,6 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port) case 6: interface = PHY_INTERFACE_MODE_2500BASEX; - mt7531_pad_setup(ds, interface); - priv->p6_interface = interface; break; default: -- cgit From 728c2af6ad8c809f66639b70e4fd8c67c57c66e7 Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Sat, 17 Sep 2022 02:07:34 +0200 Subject: net: mt7531: ensure all MACs are powered down before reset The datasheet [1] explicit describes it as requirement for a reset. [1] MT7531 Reference Manual for Development Board rev 1.0, page 735 Signed-off-by: Alexander Couzens Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net/dsa') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 95a57aeb466e..409d5c3d76ea 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2329,6 +2329,10 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } + /* all MACs must be forced link-down before sw reset */ + for (i = 0; i < MT7530_NUM_PORTS; i++) + mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); + /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | -- cgit