From d44c3fe68cc7e435ebc06d5b6ac260a5c1b495f8 Mon Sep 17 00:00:00 2001 From: Avri Altman Date: Sat, 18 Apr 2015 22:16:42 +0300 Subject: iwlwifi: mvm: fix Tx Power firmware API The firmware doesn't relate the scan to a vif. The scan is run by a separate entity called auxiliary MAC (aka AUX MAC). This AUX MAC needs to get Tx power limitations that are not applied on a specific vif, but on the device as a whole. This can be implemented by using the minimum of all the values set by the user for all the MACs. But then we need to ignore the limitations that come from the AP or regulatory for a specific vif: a specific vif might have regulatory limitations because of the channel is works on. This limit is irrelevant for the AUX MAC. Use the new API from mac80211: the user_power_level in bss_conf to achieve this. Firmware -13.ucode has already moved to this API. Change-Id: Ifba83660f378e91b93bd46d29fe8ba35a7c168a4 Signed-off-by: Avri Altman Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fw-file.h | 2 ++ drivers/net/wireless/iwlwifi/mvm/fw-api-power.h | 34 +++++++++++++++++++++++++ drivers/net/wireless/iwlwifi/mvm/fw-api.h | 13 ---------- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 24 +++++++++++++++-- 4 files changed, 58 insertions(+), 15 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-fw-file.h b/drivers/net/wireless/iwlwifi/iwl-fw-file.h index bfdf3faa6c47..62db2e5e45eb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw-file.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw-file.h @@ -244,6 +244,7 @@ enum iwl_ucode_tlv_flag { * longer than the passive one, which is essential for fragmented scan. * @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source. * IWL_UCODE_TLV_API_HDC_PHASE_0: ucode supports finer configuration of LTR + * @IWL_UCODE_TLV_API_TX_POWER_DEV: new API for tx power. * @IWL_UCODE_TLV_API_BASIC_DWELL: use only basic dwell time in scan command, * regardless of the band or the number of the probes. FW will calculate * the actual dwell time. @@ -260,6 +261,7 @@ enum iwl_ucode_tlv_api { IWL_UCODE_TLV_API_FRAGMENTED_SCAN = BIT(8), IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = BIT(9), IWL_UCODE_TLV_API_HDC_PHASE_0 = BIT(10), + IWL_UCODE_TLV_API_TX_POWER_DEV = BIT(11), IWL_UCODE_TLV_API_BASIC_DWELL = BIT(13), IWL_UCODE_TLV_API_SCD_CFG = BIT(15), IWL_UCODE_TLV_API_SINGLE_SCAN_EBS = BIT(16), diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h index 4fc0938b3fb6..b1baa33cc19b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-power.h @@ -297,6 +297,40 @@ struct iwl_uapsd_misbehaving_ap_notif { u8 reserved[3]; } __packed; +/** + * struct iwl_reduce_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @flags: (reserved for future implementation) + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in dBms. + */ +struct iwl_reduce_tx_power_cmd { + u8 flags; + u8 mac_context_id; + __le16 pwr_restriction; +} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ + +/** + * struct iwl_dev_tx_power_cmd - TX power reduction command + * REDUCE_TX_POWER_CMD = 0x9f + * @set_mode: 0 - MAC tx power, 1 - device tx power + * @mac_context_id: id of the mac ctx for which we are reducing TX power. + * @pwr_restriction: TX power restriction in 1/8 dBms. + * @dev_24: device TX power restriction in 1/8 dBms + * @dev_52_low: device TX power restriction upper band - low + * @dev_52_high: device TX power restriction upper band - high + */ +struct iwl_dev_tx_power_cmd { + __le32 set_mode; + __le32 mac_context_id; + __le16 pwr_restriction; + __le16 dev_24; + __le16 dev_52_low; + __le16 dev_52_high; +} __packed; /* TX_REDUCED_POWER_API_S_VER_2 */ + +#define IWL_DEV_MAX_TX_POWER 0x7FFF + /** * struct iwl_beacon_filter_cmd * REPLY_BEACON_FILTERING_CMD = 0xd2 (command) diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api.h b/drivers/net/wireless/iwlwifi/mvm/fw-api.h index aab68cbae754..01b1da6ad359 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api.h @@ -281,19 +281,6 @@ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; -/** - * struct iwl_reduce_tx_power_cmd - TX power reduction command - * REDUCE_TX_POWER_CMD = 0x9f - * @flags: (reserved for future implementation) - * @mac_context_id: id of the mac ctx for which we are reducing TX power. - * @pwr_restriction: TX power restriction in dBms. - */ -struct iwl_reduce_tx_power_cmd { - u8 flags; - u8 mac_context_id; - __le16 pwr_restriction; -} __packed; /* TX_REDUCED_POWER_API_S_VER_1 */ - /* * Calibration control struct. * Sent as part of the phy configuration command. diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 84555170b6f7..7c2d5ace0eb3 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1471,8 +1471,8 @@ static struct iwl_mvm_phy_ctxt *iwl_mvm_get_free_phy_ctxt(struct iwl_mvm *mvm) return NULL; } -static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, - s8 tx_power) +static int iwl_mvm_set_tx_power_old(struct iwl_mvm *mvm, + struct ieee80211_vif *vif, s8 tx_power) { /* FW is in charge of regulatory enforcement */ struct iwl_reduce_tx_power_cmd reduce_txpwr_cmd = { @@ -1485,6 +1485,26 @@ static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, &reduce_txpwr_cmd); } +static int iwl_mvm_set_tx_power(struct iwl_mvm *mvm, struct ieee80211_vif *vif, + s16 tx_power) +{ + struct iwl_dev_tx_power_cmd cmd = { + .set_mode = 0, + .mac_context_id = + cpu_to_le32(iwl_mvm_vif_from_mac80211(vif)->id), + .pwr_restriction = cpu_to_le16(8 * tx_power), + }; + + if (!(mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_TX_POWER_DEV)) + return iwl_mvm_set_tx_power_old(mvm, vif, tx_power); + + if (tx_power == IWL_DEFAULT_MAX_TX_POWER) + cmd.pwr_restriction = cpu_to_le16(IWL_DEV_MAX_TX_POWER); + + return iwl_mvm_send_cmd_pdu(mvm, REDUCE_TX_POWER_CMD, 0, + sizeof(cmd), &cmd); +} + static int iwl_mvm_mac_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { -- cgit From 145d90b6b3a3f00d8b66d0e118b4995b64b74fef Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 13 Apr 2015 12:05:48 +0300 Subject: iwlwifi: mvm: don't stop the FW monitor too early When the delay paramatere is provided, we need to stop the collection only after the delay has elapsed. Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw.c | 9 --------- drivers/net/wireless/iwlwifi/mvm/ops.c | 10 ++++++++++ 2 files changed, 10 insertions(+), 9 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index bc5eac4960e1..9c28fe72fd74 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -494,15 +494,6 @@ int iwl_mvm_fw_dbg_collect_desc(struct iwl_mvm *mvm, mvm->fw_dump_desc = desc; - /* stop recording */ - if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { - iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); - } else { - iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); - /* wait before we collect the data till the DBGC stop */ - udelay(100); - } - queue_delayed_work(system_wq, &mvm->fw_dump_wk, delay); return 0; diff --git a/drivers/net/wireless/iwlwifi/mvm/ops.c b/drivers/net/wireless/iwlwifi/mvm/ops.c index a08b03d58d4b..1c66297d82c0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/iwlwifi/mvm/ops.c @@ -865,6 +865,16 @@ static void iwl_mvm_fw_error_dump_wk(struct work_struct *work) return; mutex_lock(&mvm->mutex); + + /* stop recording */ + if (mvm->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + iwl_set_bits_prph(mvm->trans, MON_BUFF_SAMPLE_CTL, 0x100); + } else { + iwl_write_prph(mvm->trans, DBGC_IN_SAMPLE, 0); + /* wait before we collect the data till the DBGC stop */ + udelay(100); + } + iwl_mvm_fw_error_dump(mvm); /* start recording again if the firmware is not crashed */ -- cgit From 1083fd7391e989be52022f0f338e9dadc048b063 Mon Sep 17 00:00:00 2001 From: Avraham Stern Date: Tue, 31 Mar 2015 16:14:41 +0300 Subject: iwlwifi: mvm: fix scan iteration complete notification handling Scan iteration complete notification handling uses the wrong FW API version (version 2 instead of version 3). Fix that by removing version 2 API which is no longer used, and using only the updated version. Signed-off-by: Avraham Stern Reviewed-by: David Spinadel Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h | 44 ++------------------------ drivers/net/wireless/iwlwifi/mvm/scan.c | 2 +- 2 files changed, 3 insertions(+), 43 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 4f81dcf57a73..d6cced47d561 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -122,46 +122,6 @@ enum iwl_scan_complete_status { SCAN_COMP_STATUS_ERR_ALLOC_TE = 0x0C, }; -/** - * struct iwl_scan_results_notif - scan results for one channel - * ( SCAN_RESULTS_NOTIFICATION = 0x83 ) - * @channel: which channel the results are from - * @band: 0 for 5.2 GHz, 1 for 2.4 GHz - * @probe_status: SCAN_PROBE_STATUS_*, indicates success of probe request - * @num_probe_not_sent: # of request that weren't sent due to not enough time - * @duration: duration spent in channel, in usecs - * @statistics: statistics gathered for this channel - */ -struct iwl_scan_results_notif { - u8 channel; - u8 band; - u8 probe_status; - u8 num_probe_not_sent; - __le32 duration; - __le32 statistics[SCAN_RESULTS_STATISTICS]; -} __packed; /* SCAN_RESULT_NTF_API_S_VER_2 */ - -/** - * struct iwl_scan_complete_notif - notifies end of scanning (all channels) - * ( SCAN_COMPLETE_NOTIFICATION = 0x84 ) - * @scanned_channels: number of channels scanned (and number of valid results) - * @status: one of SCAN_COMP_STATUS_* - * @bt_status: BT on/off status - * @last_channel: last channel that was scanned - * @tsf_low: TSF timer (lower half) in usecs - * @tsf_high: TSF timer (higher half) in usecs - * @results: array of scan results, only "scanned_channels" of them are valid - */ -struct iwl_scan_complete_notif { - u8 scanned_channels; - u8 status; - u8 bt_status; - u8 last_channel; - __le32 tsf_low; - __le32 tsf_high; - struct iwl_scan_results_notif results[]; -} __packed; /* SCAN_COMPLETE_NTF_API_S_VER_2 */ - /* scan offload */ #define IWL_SCAN_MAX_BLACKLIST_LEN 64 #define IWL_SCAN_SHORT_BLACKLIST_LEN 16 @@ -554,7 +514,7 @@ struct iwl_scan_req_unified_lmac { } __packed; /** - * struct iwl_lmac_scan_results_notif - scan results for one channel - + * struct iwl_scan_results_notif - scan results for one channel - * SCAN_RESULT_NTF_API_S_VER_3 * @channel: which channel the results are from * @band: 0 for 5.2 GHz, 1 for 2.4 GHz @@ -562,7 +522,7 @@ struct iwl_scan_req_unified_lmac { * @num_probe_not_sent: # of request that weren't sent due to not enough time * @duration: duration spent in channel, in usecs */ -struct iwl_lmac_scan_results_notif { +struct iwl_scan_results_notif { u8 channel; u8 band; u8 probe_status; diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 74e1c86289dc..1075a213bd6a 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -319,7 +319,7 @@ int iwl_mvm_rx_scan_offload_iter_complete_notif(struct iwl_mvm *mvm, struct iwl_device_cmd *cmd) { struct iwl_rx_packet *pkt = rxb_addr(rxb); - struct iwl_scan_complete_notif *notif = (void *)pkt->data; + struct iwl_lmac_scan_complete_notif *notif = (void *)pkt->data; IWL_DEBUG_SCAN(mvm, "Scan offload iteration complete: status=0x%x scanned channels=%d\n", -- cgit From 8047cc0c584844817fbf3bf57cb18c1f762a7136 Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Thu, 26 Mar 2015 13:15:03 +0200 Subject: iwlwifi: mvm: Avoid signal based decisions if ave beacon RSSI is 0 If for some reason statistics notification received from the firmware reports 0 in average beacon RSSI value, then skip it and avoid signal based decisions. Signed-off-by: Alexander Bondar Reviewed-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/rx.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/rx.c b/drivers/net/wireless/iwlwifi/mvm/rx.c index 78ec7db64ba5..d6314ddf57b5 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rx.c +++ b/drivers/net/wireless/iwlwifi/mvm/rx.c @@ -478,6 +478,11 @@ static void iwl_mvm_stat_iterator(void *_data, u8 *mac, if (vif->type != NL80211_IFTYPE_STATION) return; + if (sig == 0) { + IWL_DEBUG_RX(mvm, "RSSI is 0 - skip signal based decision\n"); + return; + } + mvmvif->bf_data.ave_beacon_signal = sig; /* BT Coex */ -- cgit From 553452e5ffc0ed13214a287549627d02d9d7fbdc Mon Sep 17 00:00:00 2001 From: Liad Kaufman Date: Thu, 16 Apr 2015 17:21:12 +0300 Subject: iwlwifi: pcie: prevent using unmapped memory in fw monitor In the case of a DMA mapping error on the last iteration of the loop of the allocation of memory of the FW monitor we indeed free the pages, but don't NULL out the page variable thus allowing for the possibility of setting the FW monitor variables with invalid data to use. Fixes: c2d202017da1 ("iwlwifi: pcie: add firmware monitor capabilities") Signed-off-by: Liad Kaufman Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/trans.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 2de8fbfe4edf..6debb0c9111a 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -5,8 +5,8 @@ * * GPL LICENSE SUMMARY * - * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2007 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -31,8 +31,8 @@ * * BSD LICENSE * - * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2005 - 2015 Intel Corporation. All rights reserved. + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -104,7 +104,7 @@ static void iwl_pcie_free_fw_monitor(struct iwl_trans *trans) static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); - struct page *page; + struct page *page = NULL; dma_addr_t phys; u32 size; u8 power; @@ -131,6 +131,7 @@ static void iwl_pcie_alloc_fw_monitor(struct iwl_trans *trans) DMA_FROM_DEVICE); if (dma_mapping_error(trans->dev, phys)) { __free_pages(page, order); + page = NULL; continue; } IWL_INFO(trans, -- cgit From 414b7e3b9ce8b0577f613e656fdbc36b34b444dd Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 24 Apr 2015 11:03:37 -0500 Subject: rtlwifi: rtl8192cu: Fix kernel deadlock The USB mini-driver in rtlwifi, which is used by rtl8192cu, issues a call to usb_control_msg() with a timeout value of 0. In some instances where the interface is shutting down, this infinite wait results in a CPU deadlock. A one second timeout fixes this problem without affecting any normal operations. This bug is reported at https://bugzilla.novell.com/show_bug.cgi?id=927786. Reported-by: Bernhard Wiedemann Tested-by: Bernhard Wiedemann Signed-off-by: Larry Finger Cc: Stable Cc: Bernhard Wiedemann Cc: Takashi Iwai Signed-off-by: Kalle Valo --- drivers/net/wireless/rtlwifi/usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index f0188c83c79f..2721cf89fb16 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -126,7 +126,7 @@ static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request, do { status = usb_control_msg(udev, pipe, request, reqtype, value, - index, pdata, len, 0); /*max. timeout*/ + index, pdata, len, 1000); if (status < 0) { /* firmware download is checksumed, don't retry */ if ((value >= FW_8192C_START_ADDRESS && -- cgit From 8d193ca26cc28019e760b77830295a0c349d90dc Mon Sep 17 00:00:00 2001 From: Eran Harary Date: Mon, 27 Apr 2015 10:29:31 +0300 Subject: iwlwifi: mvm: don't power off the device between INIT and OPER firmwares Our device needs two different firmwares: the INIT firmware and the operational (OPER) firmware. The first one is run when the driver loads and it returns calibrations results as well as the NVM. The second one implements the WiFi protocol. If the wlan interface is not brought up, the device is put to low power state: no firmware will be running. When the interface is brought up, we would run the OPER firmware only and reuse the results of the run of the INIT firmware when the driver was loaded. This is changing with this patch. We now run the INIT firmware every time mac80211 calls start(). The penalty for that is minimal since the INIT firwmare run fast. I now also avoid to power down the device between the INIT and OPER firmware on certains buses. The motivation for this change is that there are components on the device (MFUART) that are triggered by the INIT firmware and need the device to be powered up in order to keep running. Powering the device down between the INIT and OPER firmware would stop these components and prevent them from running again since they are triggered by the INIT firmware only. The new flow allows this and also allows to trigger these components again when the interface is brought up after it has been brought down. Signed-off-by: Eran Harary Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-trans.h | 41 ++++++++++++++++++---------- drivers/net/wireless/iwlwifi/mvm/fw.c | 45 +++++++++++++++---------------- drivers/net/wireless/iwlwifi/mvm/mvm.h | 1 - drivers/net/wireless/iwlwifi/pcie/trans.c | 6 ++--- 4 files changed, 51 insertions(+), 42 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 6dfed1259260..56254a837214 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -421,8 +421,9 @@ struct iwl_trans_txq_scd_cfg { * * All the handlers MUST be implemented * - * @start_hw: starts the HW- from that point on, the HW can send interrupts - * May sleep + * @start_hw: starts the HW. If low_power is true, the NIC needs to be taken + * out of a low power state. From that point on, the HW can send + * interrupts. May sleep. * @op_mode_leave: Turn off the HW RF kill indication if on * May sleep * @start_fw: allocates and inits all the resources for the transport @@ -432,10 +433,11 @@ struct iwl_trans_txq_scd_cfg { * the SCD base address in SRAM, then provide it here, or 0 otherwise. * May sleep * @stop_device: stops the whole device (embedded CPU put to reset) and stops - * the HW. From that point on, the HW will be in low power but will still - * issue interrupt if the HW RF kill is triggered. This callback must do - * the right thing and not crash even if start_hw() was called but not - * start_fw(). May sleep + * the HW. If low_power is true, the NIC will be put in low power state. + * From that point on, the HW will be stopped but will still issue an + * interrupt if the HW RF kill switch is triggered. + * This callback must do the right thing and not crash even if %start_hw() + * was called but not &start_fw(). May sleep. * @d3_suspend: put the device into the correct mode for WoWLAN during * suspend. This is optional, if not implemented WoWLAN will not be * supported. This callback may sleep. @@ -491,14 +493,14 @@ struct iwl_trans_txq_scd_cfg { */ struct iwl_trans_ops { - int (*start_hw)(struct iwl_trans *iwl_trans); + int (*start_hw)(struct iwl_trans *iwl_trans, bool low_power); void (*op_mode_leave)(struct iwl_trans *iwl_trans); int (*start_fw)(struct iwl_trans *trans, const struct fw_img *fw, bool run_in_rfkill); int (*update_sf)(struct iwl_trans *trans, struct iwl_sf_region *st_fwrd_space); void (*fw_alive)(struct iwl_trans *trans, u32 scd_addr); - void (*stop_device)(struct iwl_trans *trans); + void (*stop_device)(struct iwl_trans *trans, bool low_power); void (*d3_suspend)(struct iwl_trans *trans, bool test); int (*d3_resume)(struct iwl_trans *trans, enum iwl_d3_status *status, @@ -652,11 +654,16 @@ static inline void iwl_trans_configure(struct iwl_trans *trans, trans->ops->configure(trans, trans_cfg); } -static inline int iwl_trans_start_hw(struct iwl_trans *trans) +static inline int _iwl_trans_start_hw(struct iwl_trans *trans, bool low_power) { might_sleep(); - return trans->ops->start_hw(trans); + return trans->ops->start_hw(trans, low_power); +} + +static inline int iwl_trans_start_hw(struct iwl_trans *trans) +{ + return trans->ops->start_hw(trans, true); } static inline void iwl_trans_op_mode_leave(struct iwl_trans *trans) @@ -703,15 +710,21 @@ static inline int iwl_trans_update_sf(struct iwl_trans *trans, return 0; } -static inline void iwl_trans_stop_device(struct iwl_trans *trans) +static inline void _iwl_trans_stop_device(struct iwl_trans *trans, + bool low_power) { might_sleep(); - trans->ops->stop_device(trans); + trans->ops->stop_device(trans, low_power); trans->state = IWL_TRANS_NO_FW; } +static inline void iwl_trans_stop_device(struct iwl_trans *trans) +{ + _iwl_trans_stop_device(trans, true); +} + static inline void iwl_trans_d3_suspend(struct iwl_trans *trans, bool test) { might_sleep(); diff --git a/drivers/net/wireless/iwlwifi/mvm/fw.c b/drivers/net/wireless/iwlwifi/mvm/fw.c index 9c28fe72fd74..df869633f4dd 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw.c +++ b/drivers/net/wireless/iwlwifi/mvm/fw.c @@ -6,7 +6,7 @@ * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as @@ -32,7 +32,7 @@ * BSD LICENSE * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. - * Copyright(c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -322,7 +322,7 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) lockdep_assert_held(&mvm->mutex); - if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating)) + if (WARN_ON_ONCE(mvm->calibrating)) return 0; iwl_init_notification_wait(&mvm->notif_wait, @@ -396,8 +396,6 @@ int iwl_run_init_mvm_ucode(struct iwl_mvm *mvm, bool read_nvm) */ ret = iwl_wait_notification(&mvm->notif_wait, &calib_wait, MVM_UCODE_CALIB_TIMEOUT); - if (!ret) - mvm->init_ucode_complete = true; if (ret && iwl_mvm_is_radio_killed(mvm)) { IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n"); @@ -649,25 +647,24 @@ int iwl_mvm_up(struct iwl_mvm *mvm) * module loading, load init ucode now * (for example, if we were in RFKILL) */ - if (!mvm->init_ucode_complete) { - ret = iwl_run_init_mvm_ucode(mvm, false); - if (ret && !iwlmvm_mod_params.init_dbg) { - IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); - /* this can't happen */ - if (WARN_ON(ret > 0)) - ret = -ERFKILL; - goto error; - } - if (!iwlmvm_mod_params.init_dbg) { - /* - * should stop and start HW since that INIT - * image just loaded - */ - iwl_trans_stop_device(mvm->trans); - ret = iwl_trans_start_hw(mvm->trans); - if (ret) - return ret; - } + ret = iwl_run_init_mvm_ucode(mvm, false); + if (ret && !iwlmvm_mod_params.init_dbg) { + IWL_ERR(mvm, "Failed to run INIT ucode: %d\n", ret); + /* this can't happen */ + if (WARN_ON(ret > 0)) + ret = -ERFKILL; + goto error; + } + if (!iwlmvm_mod_params.init_dbg) { + /* + * Stop and start the transport without entering low power + * mode. This will save the state of other components on the + * device that are triggered by the INIT firwmare (MFUART). + */ + _iwl_trans_stop_device(mvm->trans, false); + _iwl_trans_start_hw(mvm->trans, false); + if (ret) + return ret; } if (iwlmvm_mod_params.init_dbg) diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h index d5522a161242..cf70f681d1ac 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h @@ -603,7 +603,6 @@ struct iwl_mvm { enum iwl_ucode_type cur_ucode; bool ucode_loaded; - bool init_ucode_complete; bool calibrating; u32 error_event_table; u32 log_event_table; diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index 6debb0c9111a..47bbf573fdc8 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1021,7 +1021,7 @@ static void iwl_trans_pcie_fw_alive(struct iwl_trans *trans, u32 scd_addr) iwl_pcie_tx_start(trans, scd_addr); } -static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) +static void iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) { struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); bool hw_rfkill, was_hw_rfkill; @@ -1116,7 +1116,7 @@ static void iwl_trans_pcie_stop_device(struct iwl_trans *trans) void iwl_trans_pcie_rf_kill(struct iwl_trans *trans, bool state) { if (iwl_op_mode_hw_rf_kill(trans->op_mode, state)) - iwl_trans_pcie_stop_device(trans); + iwl_trans_pcie_stop_device(trans, true); } static void iwl_trans_pcie_d3_suspend(struct iwl_trans *trans, bool test) @@ -1201,7 +1201,7 @@ static int iwl_trans_pcie_d3_resume(struct iwl_trans *trans, return 0; } -static int iwl_trans_pcie_start_hw(struct iwl_trans *trans) +static int iwl_trans_pcie_start_hw(struct iwl_trans *trans, bool low_power) { bool hw_rfkill; int err; -- cgit From 6bbd5521edd3896190f5c0581f059b7c93daf670 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 28 Apr 2015 15:00:23 +0300 Subject: iwlwifi: mvm: fix typo in CONFIG option I forgot to rename the CPTCFG_ prefix... Fixes: 484b3d13b4ac ("iwlwifi: mvm: add debugfs entry with the number of net-detect scans") Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/d3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/d3.c b/drivers/net/wireless/iwlwifi/mvm/d3.c index a6c48c7b1e16..1b1b2bf26819 100644 --- a/drivers/net/wireless/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/iwlwifi/mvm/d3.c @@ -1726,7 +1726,7 @@ iwl_mvm_netdetect_query_results(struct iwl_mvm *mvm, results->matched_profiles = le32_to_cpu(query->matched_profiles); memcpy(results->matches, query->matches, sizeof(results->matches)); -#ifdef CPTCFG_IWLWIFI_DEBUGFS +#ifdef CONFIG_IWLWIFI_DEBUGFS mvm->last_netdetect_scans = le32_to_cpu(query->n_scans_done); #endif -- cgit From e7afe89fd67d40a7f5fff8130c5f925d99a94b1f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 21 Apr 2015 09:21:46 +0200 Subject: iwlwifi: mvm: force quota update update after FW restart During firmware restart, the quota command isn't calculated multiple times, but after the firmware restart it has to be sent, so force it. Otherwise the firmware crashes. Signed-off-by: Johannes Berg Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7c2d5ace0eb3..40265b9c66ae 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1322,7 +1322,7 @@ static void iwl_mvm_restart_complete(struct iwl_mvm *mvm) clear_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status); iwl_mvm_d0i3_enable_tx(mvm, NULL); - ret = iwl_mvm_update_quotas(mvm, false, NULL); + ret = iwl_mvm_update_quotas(mvm, true, NULL); if (ret) IWL_ERR(mvm, "Failed to update quotas after restart (%d)\n", ret); -- cgit From 4748e86ecf262ae9d94b7e4073653554951ceb7a Mon Sep 17 00:00:00 2001 From: Christoffer Holmstedt Date: Thu, 30 Apr 2015 17:44:56 +0200 Subject: at86rf230: Add macro for TRX STATE MASK Instead of using the 'magic' number of 0x1f the TRX_STATE_MASK macro is introduced. Signed-off-by: Christoffer Holmstedt Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 38026650c038..684488acc65d 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -292,6 +292,8 @@ struct at86rf230_local { #define STATE_BUSY_RX_AACK_NOCLK 0x1E #define STATE_TRANSITION_IN_PROGRESS 0x1F +#define TRX_STATE_MASK (0x1F) + #define AT86RF2XX_NUMREGS 0x3F static void @@ -509,7 +511,7 @@ at86rf230_async_state_assert(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; const u8 *buf = ctx->buf; - const u8 trx_state = buf[1] & 0x1f; + const u8 trx_state = buf[1] & TRX_STATE_MASK; /* Assert state change */ if (trx_state != ctx->to_state) { @@ -667,7 +669,7 @@ at86rf230_async_state_change_start(void *context) struct at86rf230_state_change *ctx = context; struct at86rf230_local *lp = ctx->lp; u8 *buf = ctx->buf; - const u8 trx_state = buf[1] & 0x1f; + const u8 trx_state = buf[1] & TRX_STATE_MASK; int rc; /* Check for "possible" STATE_TRANSITION_IN_PROGRESS */ -- cgit From 5e8e01e262be1eeaae598be44b8e43b29aab842a Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:58 +0200 Subject: at86rf230: remove tabs after define This patch cleanups the at86rf230 driver to use a space instead a tab after define. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 304 ++++++++++++++++++------------------- 1 file changed, 152 insertions(+), 152 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 684488acc65d..9a41deb1966c 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -100,158 +100,158 @@ struct at86rf230_local { struct at86rf230_state_change tx; }; -#define RG_TRX_STATUS (0x01) -#define SR_TRX_STATUS 0x01, 0x1f, 0 -#define SR_RESERVED_01_3 0x01, 0x20, 5 -#define SR_CCA_STATUS 0x01, 0x40, 6 -#define SR_CCA_DONE 0x01, 0x80, 7 -#define RG_TRX_STATE (0x02) -#define SR_TRX_CMD 0x02, 0x1f, 0 -#define SR_TRAC_STATUS 0x02, 0xe0, 5 -#define RG_TRX_CTRL_0 (0x03) -#define SR_CLKM_CTRL 0x03, 0x07, 0 -#define SR_CLKM_SHA_SEL 0x03, 0x08, 3 -#define SR_PAD_IO_CLKM 0x03, 0x30, 4 -#define SR_PAD_IO 0x03, 0xc0, 6 -#define RG_TRX_CTRL_1 (0x04) -#define SR_IRQ_POLARITY 0x04, 0x01, 0 -#define SR_IRQ_MASK_MODE 0x04, 0x02, 1 -#define SR_SPI_CMD_MODE 0x04, 0x0c, 2 -#define SR_RX_BL_CTRL 0x04, 0x10, 4 -#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5 -#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 -#define SR_PA_EXT_EN 0x04, 0x80, 7 -#define RG_PHY_TX_PWR (0x05) -#define SR_TX_PWR 0x05, 0x0f, 0 -#define SR_PA_LT 0x05, 0x30, 4 -#define SR_PA_BUF_LT 0x05, 0xc0, 6 -#define RG_PHY_RSSI (0x06) -#define SR_RSSI 0x06, 0x1f, 0 -#define SR_RND_VALUE 0x06, 0x60, 5 -#define SR_RX_CRC_VALID 0x06, 0x80, 7 -#define RG_PHY_ED_LEVEL (0x07) -#define SR_ED_LEVEL 0x07, 0xff, 0 -#define RG_PHY_CC_CCA (0x08) -#define SR_CHANNEL 0x08, 0x1f, 0 -#define SR_CCA_MODE 0x08, 0x60, 5 -#define SR_CCA_REQUEST 0x08, 0x80, 7 -#define RG_CCA_THRES (0x09) -#define SR_CCA_ED_THRES 0x09, 0x0f, 0 -#define SR_RESERVED_09_1 0x09, 0xf0, 4 -#define RG_RX_CTRL (0x0a) -#define SR_PDT_THRES 0x0a, 0x0f, 0 -#define SR_RESERVED_0a_1 0x0a, 0xf0, 4 -#define RG_SFD_VALUE (0x0b) -#define SR_SFD_VALUE 0x0b, 0xff, 0 -#define RG_TRX_CTRL_2 (0x0c) -#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 -#define SR_SUB_MODE 0x0c, 0x04, 2 -#define SR_BPSK_QPSK 0x0c, 0x08, 3 -#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4 -#define SR_RESERVED_0c_5 0x0c, 0x60, 5 -#define SR_RX_SAFE_MODE 0x0c, 0x80, 7 -#define RG_ANT_DIV (0x0d) -#define SR_ANT_CTRL 0x0d, 0x03, 0 -#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2 -#define SR_ANT_DIV_EN 0x0d, 0x08, 3 -#define SR_RESERVED_0d_2 0x0d, 0x70, 4 -#define SR_ANT_SEL 0x0d, 0x80, 7 -#define RG_IRQ_MASK (0x0e) -#define SR_IRQ_MASK 0x0e, 0xff, 0 -#define RG_IRQ_STATUS (0x0f) -#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0 -#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1 -#define SR_IRQ_2_RX_START 0x0f, 0x04, 2 -#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3 -#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4 -#define SR_IRQ_5_AMI 0x0f, 0x20, 5 -#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6 -#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7 -#define RG_VREG_CTRL (0x10) -#define SR_RESERVED_10_6 0x10, 0x03, 0 -#define SR_DVDD_OK 0x10, 0x04, 2 -#define SR_DVREG_EXT 0x10, 0x08, 3 -#define SR_RESERVED_10_3 0x10, 0x30, 4 -#define SR_AVDD_OK 0x10, 0x40, 6 -#define SR_AVREG_EXT 0x10, 0x80, 7 -#define RG_BATMON (0x11) -#define SR_BATMON_VTH 0x11, 0x0f, 0 -#define SR_BATMON_HR 0x11, 0x10, 4 -#define SR_BATMON_OK 0x11, 0x20, 5 -#define SR_RESERVED_11_1 0x11, 0xc0, 6 -#define RG_XOSC_CTRL (0x12) -#define SR_XTAL_TRIM 0x12, 0x0f, 0 -#define SR_XTAL_MODE 0x12, 0xf0, 4 -#define RG_RX_SYN (0x15) -#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0 -#define SR_RESERVED_15_2 0x15, 0x70, 4 -#define SR_RX_PDT_DIS 0x15, 0x80, 7 -#define RG_XAH_CTRL_1 (0x17) -#define SR_RESERVED_17_8 0x17, 0x01, 0 -#define SR_AACK_PROM_MODE 0x17, 0x02, 1 -#define SR_AACK_ACK_TIME 0x17, 0x04, 2 -#define SR_RESERVED_17_5 0x17, 0x08, 3 -#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 -#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 -#define SR_CSMA_LBT_MODE 0x17, 0x40, 6 -#define SR_RESERVED_17_1 0x17, 0x80, 7 -#define RG_FTN_CTRL (0x18) -#define SR_RESERVED_18_2 0x18, 0x7f, 0 -#define SR_FTN_START 0x18, 0x80, 7 -#define RG_PLL_CF (0x1a) -#define SR_RESERVED_1a_2 0x1a, 0x7f, 0 -#define SR_PLL_CF_START 0x1a, 0x80, 7 -#define RG_PLL_DCU (0x1b) -#define SR_RESERVED_1b_3 0x1b, 0x3f, 0 -#define SR_RESERVED_1b_2 0x1b, 0x40, 6 -#define SR_PLL_DCU_START 0x1b, 0x80, 7 -#define RG_PART_NUM (0x1c) -#define SR_PART_NUM 0x1c, 0xff, 0 -#define RG_VERSION_NUM (0x1d) -#define SR_VERSION_NUM 0x1d, 0xff, 0 -#define RG_MAN_ID_0 (0x1e) -#define SR_MAN_ID_0 0x1e, 0xff, 0 -#define RG_MAN_ID_1 (0x1f) -#define SR_MAN_ID_1 0x1f, 0xff, 0 -#define RG_SHORT_ADDR_0 (0x20) -#define SR_SHORT_ADDR_0 0x20, 0xff, 0 -#define RG_SHORT_ADDR_1 (0x21) -#define SR_SHORT_ADDR_1 0x21, 0xff, 0 -#define RG_PAN_ID_0 (0x22) -#define SR_PAN_ID_0 0x22, 0xff, 0 -#define RG_PAN_ID_1 (0x23) -#define SR_PAN_ID_1 0x23, 0xff, 0 -#define RG_IEEE_ADDR_0 (0x24) -#define SR_IEEE_ADDR_0 0x24, 0xff, 0 -#define RG_IEEE_ADDR_1 (0x25) -#define SR_IEEE_ADDR_1 0x25, 0xff, 0 -#define RG_IEEE_ADDR_2 (0x26) -#define SR_IEEE_ADDR_2 0x26, 0xff, 0 -#define RG_IEEE_ADDR_3 (0x27) -#define SR_IEEE_ADDR_3 0x27, 0xff, 0 -#define RG_IEEE_ADDR_4 (0x28) -#define SR_IEEE_ADDR_4 0x28, 0xff, 0 -#define RG_IEEE_ADDR_5 (0x29) -#define SR_IEEE_ADDR_5 0x29, 0xff, 0 -#define RG_IEEE_ADDR_6 (0x2a) -#define SR_IEEE_ADDR_6 0x2a, 0xff, 0 -#define RG_IEEE_ADDR_7 (0x2b) -#define SR_IEEE_ADDR_7 0x2b, 0xff, 0 -#define RG_XAH_CTRL_0 (0x2c) -#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0 -#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1 -#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4 -#define RG_CSMA_SEED_0 (0x2d) -#define SR_CSMA_SEED_0 0x2d, 0xff, 0 -#define RG_CSMA_SEED_1 (0x2e) -#define SR_CSMA_SEED_1 0x2e, 0x07, 0 -#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3 -#define SR_AACK_DIS_ACK 0x2e, 0x10, 4 -#define SR_AACK_SET_PD 0x2e, 0x20, 5 -#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6 -#define RG_CSMA_BE (0x2f) -#define SR_MIN_BE 0x2f, 0x0f, 0 -#define SR_MAX_BE 0x2f, 0xf0, 4 +#define RG_TRX_STATUS (0x01) +#define SR_TRX_STATUS 0x01, 0x1f, 0 +#define SR_RESERVED_01_3 0x01, 0x20, 5 +#define SR_CCA_STATUS 0x01, 0x40, 6 +#define SR_CCA_DONE 0x01, 0x80, 7 +#define RG_TRX_STATE (0x02) +#define SR_TRX_CMD 0x02, 0x1f, 0 +#define SR_TRAC_STATUS 0x02, 0xe0, 5 +#define RG_TRX_CTRL_0 (0x03) +#define SR_CLKM_CTRL 0x03, 0x07, 0 +#define SR_CLKM_SHA_SEL 0x03, 0x08, 3 +#define SR_PAD_IO_CLKM 0x03, 0x30, 4 +#define SR_PAD_IO 0x03, 0xc0, 6 +#define RG_TRX_CTRL_1 (0x04) +#define SR_IRQ_POLARITY 0x04, 0x01, 0 +#define SR_IRQ_MASK_MODE 0x04, 0x02, 1 +#define SR_SPI_CMD_MODE 0x04, 0x0c, 2 +#define SR_RX_BL_CTRL 0x04, 0x10, 4 +#define SR_TX_AUTO_CRC_ON 0x04, 0x20, 5 +#define SR_IRQ_2_EXT_EN 0x04, 0x40, 6 +#define SR_PA_EXT_EN 0x04, 0x80, 7 +#define RG_PHY_TX_PWR (0x05) +#define SR_TX_PWR 0x05, 0x0f, 0 +#define SR_PA_LT 0x05, 0x30, 4 +#define SR_PA_BUF_LT 0x05, 0xc0, 6 +#define RG_PHY_RSSI (0x06) +#define SR_RSSI 0x06, 0x1f, 0 +#define SR_RND_VALUE 0x06, 0x60, 5 +#define SR_RX_CRC_VALID 0x06, 0x80, 7 +#define RG_PHY_ED_LEVEL (0x07) +#define SR_ED_LEVEL 0x07, 0xff, 0 +#define RG_PHY_CC_CCA (0x08) +#define SR_CHANNEL 0x08, 0x1f, 0 +#define SR_CCA_MODE 0x08, 0x60, 5 +#define SR_CCA_REQUEST 0x08, 0x80, 7 +#define RG_CCA_THRES (0x09) +#define SR_CCA_ED_THRES 0x09, 0x0f, 0 +#define SR_RESERVED_09_1 0x09, 0xf0, 4 +#define RG_RX_CTRL (0x0a) +#define SR_PDT_THRES 0x0a, 0x0f, 0 +#define SR_RESERVED_0a_1 0x0a, 0xf0, 4 +#define RG_SFD_VALUE (0x0b) +#define SR_SFD_VALUE 0x0b, 0xff, 0 +#define RG_TRX_CTRL_2 (0x0c) +#define SR_OQPSK_DATA_RATE 0x0c, 0x03, 0 +#define SR_SUB_MODE 0x0c, 0x04, 2 +#define SR_BPSK_QPSK 0x0c, 0x08, 3 +#define SR_OQPSK_SUB1_RC_EN 0x0c, 0x10, 4 +#define SR_RESERVED_0c_5 0x0c, 0x60, 5 +#define SR_RX_SAFE_MODE 0x0c, 0x80, 7 +#define RG_ANT_DIV (0x0d) +#define SR_ANT_CTRL 0x0d, 0x03, 0 +#define SR_ANT_EXT_SW_EN 0x0d, 0x04, 2 +#define SR_ANT_DIV_EN 0x0d, 0x08, 3 +#define SR_RESERVED_0d_2 0x0d, 0x70, 4 +#define SR_ANT_SEL 0x0d, 0x80, 7 +#define RG_IRQ_MASK (0x0e) +#define SR_IRQ_MASK 0x0e, 0xff, 0 +#define RG_IRQ_STATUS (0x0f) +#define SR_IRQ_0_PLL_LOCK 0x0f, 0x01, 0 +#define SR_IRQ_1_PLL_UNLOCK 0x0f, 0x02, 1 +#define SR_IRQ_2_RX_START 0x0f, 0x04, 2 +#define SR_IRQ_3_TRX_END 0x0f, 0x08, 3 +#define SR_IRQ_4_CCA_ED_DONE 0x0f, 0x10, 4 +#define SR_IRQ_5_AMI 0x0f, 0x20, 5 +#define SR_IRQ_6_TRX_UR 0x0f, 0x40, 6 +#define SR_IRQ_7_BAT_LOW 0x0f, 0x80, 7 +#define RG_VREG_CTRL (0x10) +#define SR_RESERVED_10_6 0x10, 0x03, 0 +#define SR_DVDD_OK 0x10, 0x04, 2 +#define SR_DVREG_EXT 0x10, 0x08, 3 +#define SR_RESERVED_10_3 0x10, 0x30, 4 +#define SR_AVDD_OK 0x10, 0x40, 6 +#define SR_AVREG_EXT 0x10, 0x80, 7 +#define RG_BATMON (0x11) +#define SR_BATMON_VTH 0x11, 0x0f, 0 +#define SR_BATMON_HR 0x11, 0x10, 4 +#define SR_BATMON_OK 0x11, 0x20, 5 +#define SR_RESERVED_11_1 0x11, 0xc0, 6 +#define RG_XOSC_CTRL (0x12) +#define SR_XTAL_TRIM 0x12, 0x0f, 0 +#define SR_XTAL_MODE 0x12, 0xf0, 4 +#define RG_RX_SYN (0x15) +#define SR_RX_PDT_LEVEL 0x15, 0x0f, 0 +#define SR_RESERVED_15_2 0x15, 0x70, 4 +#define SR_RX_PDT_DIS 0x15, 0x80, 7 +#define RG_XAH_CTRL_1 (0x17) +#define SR_RESERVED_17_8 0x17, 0x01, 0 +#define SR_AACK_PROM_MODE 0x17, 0x02, 1 +#define SR_AACK_ACK_TIME 0x17, 0x04, 2 +#define SR_RESERVED_17_5 0x17, 0x08, 3 +#define SR_AACK_UPLD_RES_FT 0x17, 0x10, 4 +#define SR_AACK_FLTR_RES_FT 0x17, 0x20, 5 +#define SR_CSMA_LBT_MODE 0x17, 0x40, 6 +#define SR_RESERVED_17_1 0x17, 0x80, 7 +#define RG_FTN_CTRL (0x18) +#define SR_RESERVED_18_2 0x18, 0x7f, 0 +#define SR_FTN_START 0x18, 0x80, 7 +#define RG_PLL_CF (0x1a) +#define SR_RESERVED_1a_2 0x1a, 0x7f, 0 +#define SR_PLL_CF_START 0x1a, 0x80, 7 +#define RG_PLL_DCU (0x1b) +#define SR_RESERVED_1b_3 0x1b, 0x3f, 0 +#define SR_RESERVED_1b_2 0x1b, 0x40, 6 +#define SR_PLL_DCU_START 0x1b, 0x80, 7 +#define RG_PART_NUM (0x1c) +#define SR_PART_NUM 0x1c, 0xff, 0 +#define RG_VERSION_NUM (0x1d) +#define SR_VERSION_NUM 0x1d, 0xff, 0 +#define RG_MAN_ID_0 (0x1e) +#define SR_MAN_ID_0 0x1e, 0xff, 0 +#define RG_MAN_ID_1 (0x1f) +#define SR_MAN_ID_1 0x1f, 0xff, 0 +#define RG_SHORT_ADDR_0 (0x20) +#define SR_SHORT_ADDR_0 0x20, 0xff, 0 +#define RG_SHORT_ADDR_1 (0x21) +#define SR_SHORT_ADDR_1 0x21, 0xff, 0 +#define RG_PAN_ID_0 (0x22) +#define SR_PAN_ID_0 0x22, 0xff, 0 +#define RG_PAN_ID_1 (0x23) +#define SR_PAN_ID_1 0x23, 0xff, 0 +#define RG_IEEE_ADDR_0 (0x24) +#define SR_IEEE_ADDR_0 0x24, 0xff, 0 +#define RG_IEEE_ADDR_1 (0x25) +#define SR_IEEE_ADDR_1 0x25, 0xff, 0 +#define RG_IEEE_ADDR_2 (0x26) +#define SR_IEEE_ADDR_2 0x26, 0xff, 0 +#define RG_IEEE_ADDR_3 (0x27) +#define SR_IEEE_ADDR_3 0x27, 0xff, 0 +#define RG_IEEE_ADDR_4 (0x28) +#define SR_IEEE_ADDR_4 0x28, 0xff, 0 +#define RG_IEEE_ADDR_5 (0x29) +#define SR_IEEE_ADDR_5 0x29, 0xff, 0 +#define RG_IEEE_ADDR_6 (0x2a) +#define SR_IEEE_ADDR_6 0x2a, 0xff, 0 +#define RG_IEEE_ADDR_7 (0x2b) +#define SR_IEEE_ADDR_7 0x2b, 0xff, 0 +#define RG_XAH_CTRL_0 (0x2c) +#define SR_SLOTTED_OPERATION 0x2c, 0x01, 0 +#define SR_MAX_CSMA_RETRIES 0x2c, 0x0e, 1 +#define SR_MAX_FRAME_RETRIES 0x2c, 0xf0, 4 +#define RG_CSMA_SEED_0 (0x2d) +#define SR_CSMA_SEED_0 0x2d, 0xff, 0 +#define RG_CSMA_SEED_1 (0x2e) +#define SR_CSMA_SEED_1 0x2e, 0x07, 0 +#define SR_AACK_I_AM_COORD 0x2e, 0x08, 3 +#define SR_AACK_DIS_ACK 0x2e, 0x10, 4 +#define SR_AACK_SET_PD 0x2e, 0x20, 5 +#define SR_AACK_FVN_MODE 0x2e, 0xc0, 6 +#define RG_CSMA_BE (0x2f) +#define SR_MIN_BE 0x2f, 0x0f, 0 +#define SR_MAX_BE 0x2f, 0xf0, 4 #define CMD_REG 0x80 #define CMD_REG_MASK 0x3f -- cgit From 2ad33244db816755a27dcdd312a70d966c85f0ee Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:44:59 +0200 Subject: at86rf230: move cal_timeout to state change This patch moves the calculation timeout of TRX_OFF to RX_AACK_ON handling to the async state change functionality. With this patch we can do a reset of calculation timeout when others TRX_OFF to RX_AACK_ON happens instead of doing this on interface up only. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 9a41deb1966c..635878833936 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -611,6 +611,11 @@ at86rf230_async_state_delay(void *context) switch (ctx->to_state) { case STATE_RX_AACK_ON: tim = ktime_set(0, c->t_off_to_aack * NSEC_PER_USEC); + /* state change from TRX_OFF to RX_AACK_ON to do a + * calibration, we need to reset the timeout for the + * next one. + */ + lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; goto change; case STATE_TX_ON: tim = ktime_set(0, c->t_off_to_tx_on * NSEC_PER_USEC); @@ -1039,9 +1044,6 @@ at86rf230_ed(struct ieee802154_hw *hw, u8 *level) static int at86rf230_start(struct ieee802154_hw *hw) { - struct at86rf230_local *lp = hw->priv; - - lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; return at86rf230_sync_state_change(hw->priv, STATE_RX_AACK_ON); } -- cgit From 3b951ca7d2772834c7ca828f0fe5745480426982 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:00 +0200 Subject: at86rf230: add TX_ARET_ON for calibration timeout This patch adds a calibration timeout reset when change from TRX_OFF to TX_ARET_ON which also occurs a calibration. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 635878833936..f99dce5c64da 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -617,10 +617,11 @@ at86rf230_async_state_delay(void *context) */ lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; goto change; + case STATE_TX_ARET_ON: case STATE_TX_ON: tim = ktime_set(0, c->t_off_to_tx_on * NSEC_PER_USEC); - /* state change from TRX_OFF to TX_ON to do a - * calibration, we need to reset the timeout for the + /* state change from TRX_OFF to TX_ON or ARET_ON to do + * a calibration, we need to reset the timeout for the * next one. */ lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT; -- cgit From 2f8cdd95097bdcd8d1e2b02edb0a9deb1e034a7e Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:01 +0200 Subject: at86rf230: remove unnecessary tx state change All supported transceivers can do a valid state change from TRX_OFF to AACK_ON. This patch removes the state change chain from TRX_OFF -> TX_ON -> AACK_ON instead we doing a directly state change from TRX_OFF to AACK_ON. Signed-off-by: Alexander Aring Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index f99dce5c64da..6285145545a7 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -780,16 +780,6 @@ at86rf230_tx_on(void *context) at86rf230_tx_complete, true); } -static void -at86rf230_tx_trac_error(void *context) -{ - struct at86rf230_state_change *ctx = context; - struct at86rf230_local *lp = ctx->lp; - - at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - at86rf230_tx_on, true); -} - static void at86rf230_tx_trac_check(void *context) { @@ -799,12 +789,12 @@ at86rf230_tx_trac_check(void *context) const u8 trac = (buf[1] & 0xe0) >> 5; /* If trac status is different than zero we need to do a state change - * to STATE_FORCE_TRX_OFF then STATE_TX_ON to recover the transceiver - * state to TX_ON. + * to STATE_FORCE_TRX_OFF then STATE_RX_AACK_ON to recover the + * transceiver. */ if (trac) at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF, - at86rf230_tx_trac_error, true); + at86rf230_tx_on, true); else at86rf230_tx_on(context); } -- cgit From 8500920317813ed420311d9cf16c345fc216fb86 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:02 +0200 Subject: at86rf230: change state change if from trx_off If a transmit ends in a calibration which means the transceiver do a TRX_OFF state change, we can directly change into TX_ARET state instead doing a TX_ON to TX_ARET statechange. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 6285145545a7..05ef56d5a710 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -95,6 +95,7 @@ struct at86rf230_local { unsigned long cal_timeout; s8 max_frame_retries; bool is_tx; + bool is_tx_from_off; u8 tx_retry; struct sk_buff *tx_skb; struct at86rf230_state_change tx; @@ -991,12 +992,21 @@ at86rf230_xmit_start(void *context) * are in STATE_TX_ON. The pfad differs here, so we change * the complete handler. */ - if (lp->tx_aret) - at86rf230_async_state_change(lp, ctx, STATE_TX_ON, - at86rf230_xmit_tx_on, false); - else + if (lp->tx_aret) { + if (lp->is_tx_from_off) { + lp->is_tx_from_off = false; + at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON, + at86rf230_xmit_tx_on, + false); + } else { + at86rf230_async_state_change(lp, ctx, STATE_TX_ON, + at86rf230_xmit_tx_on, + false); + } + } else { at86rf230_async_state_change(lp, ctx, STATE_TX_ON, at86rf230_write_frame, false); + } } static int @@ -1015,11 +1025,13 @@ at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb) * to TX_ON, the lp->cal_timeout should be reinit by state_delay * function then to start in the next 5 minutes. */ - if (time_is_before_jiffies(lp->cal_timeout)) + if (time_is_before_jiffies(lp->cal_timeout)) { + lp->is_tx_from_off = true; at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF, at86rf230_xmit_start, false); - else + } else { at86rf230_xmit_start(ctx); + } return 0; } -- cgit From d2c8bf51d07729ae6887fa84947b1f825b3729e1 Mon Sep 17 00:00:00 2001 From: Alexander Aring Date: Thu, 30 Apr 2015 17:45:03 +0200 Subject: at86rf230: add slp_tr support to start tx This patch adds support for one of the slp_tr gpio use cases which indicates the TX_START command without doing some spi bus traffic. Signed-off-by: Alexander Aring Reviewed-by: Varka Bhadram Signed-off-by: Marcel Holtmann --- drivers/net/ieee802154/at86rf230.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c index 05ef56d5a710..67d00fbc2e0e 100644 --- a/drivers/net/ieee802154/at86rf230.c +++ b/drivers/net/ieee802154/at86rf230.c @@ -85,6 +85,7 @@ struct at86rf230_local { struct ieee802154_hw *hw; struct at86rf2xx_chip_data *data; struct regmap *regmap; + int slp_tr; struct completion state_complete; struct at86rf230_state_change state; @@ -339,6 +340,14 @@ at86rf230_write_subreg(struct at86rf230_local *lp, return regmap_update_bits(lp->regmap, addr, mask, data << shift); } +static inline void +at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp) +{ + gpio_set_value(lp->slp_tr, 1); + udelay(1); + gpio_set_value(lp->slp_tr, 0); +} + static bool at86rf230_reg_writeable(struct device *dev, unsigned int reg) { @@ -940,13 +949,18 @@ at86rf230_write_frame_complete(void *context) u8 *buf = ctx->buf; int rc; - buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE; - buf[1] = STATE_BUSY_TX; ctx->trx.len = 2; - ctx->msg.complete = NULL; - rc = spi_async(lp->spi, &ctx->msg); - if (rc) - at86rf230_async_error(lp, ctx, rc); + + if (gpio_is_valid(lp->slp_tr)) { + at86rf230_slp_tr_rising_edge(lp); + } else { + buf[0] = (RG_TRX_STATE & CMD_REG_MASK) | CMD_REG | CMD_WRITE; + buf[1] = STATE_BUSY_TX; + ctx->msg.complete = NULL; + rc = spi_async(lp->spi, &ctx->msg); + if (rc) + at86rf230_async_error(lp, ctx, rc); + } } static void @@ -1680,6 +1694,7 @@ static int at86rf230_probe(struct spi_device *spi) lp = hw->priv; lp->hw = hw; lp->spi = spi; + lp->slp_tr = slp_tr; hw->parent = &spi->dev; hw->vif_data_size = sizeof(*lp); ieee802154_random_extended_addr(&hw->phy->perm_extended_addr); -- cgit From 5793affe8c723ece8114b898ab9003c7d97f86d1 Mon Sep 17 00:00:00 2001 From: Jeppe Ledet-Pedersen Date: Wed, 29 Apr 2015 17:05:01 +0200 Subject: net: can: xilinx_can: fix extended frame handling Using IDR_SRR in RXFIFO_ID to test for the presence of data is only valid for standard frames. For extended frames the bit is always 1 and IDR_RTR should be used instead. This patch switches the check to use CAN_RTR_FLAG which is correctly set when reading the ID. The patch also changes the DW1/DW2 to be read unconditionally, since this is necessary to remove the frame from the RXFIFO. Signed-off-by: Jeppe Ledet-Pedersen Acked-by: Kedareswara rao Appana Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- drivers/net/can/xilinx_can.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c index 6bddfe062b51..fc55e8e0351d 100644 --- a/drivers/net/can/xilinx_can.c +++ b/drivers/net/can/xilinx_can.c @@ -509,10 +509,11 @@ static int xcan_rx(struct net_device *ndev) cf->can_id |= CAN_RTR_FLAG; } - if (!(id_xcan & XCAN_IDR_SRR_MASK)) { - data[0] = priv->read_reg(priv, XCAN_RXFIFO_DW1_OFFSET); - data[1] = priv->read_reg(priv, XCAN_RXFIFO_DW2_OFFSET); + /* DW1/DW2 must always be read to remove message from RXFIFO */ + data[0] = priv->read_reg(priv, XCAN_RXFIFO_DW1_OFFSET); + data[1] = priv->read_reg(priv, XCAN_RXFIFO_DW2_OFFSET); + if (!(cf->can_id & CAN_RTR_FLAG)) { /* Change Xilinx CAN data format to socketCAN data format */ if (cf->can_dlc > 0) *(__be32 *)(cf->data) = cpu_to_be32(data[0]); -- cgit From f673821864899153142365aca888435815ac93f0 Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Wed, 8 Apr 2015 20:51:57 +0200 Subject: ath9k: fix per-packet tx power configuration Do not use ieee80211_vif pointer in ath_get_rate_txpower() since it has been overwritten by setup_frame_info() and it will result in a corrupted tx power configuration. Set per-packet tx power in setup_frame_info() according to current vif tx power. Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath9k/xmit.c | 52 +++++++++++++++++------------------ 1 file changed, 25 insertions(+), 27 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 0acd079ba96b..3ad79bb4f2c2 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1103,28 +1103,14 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, struct sk_buff *skb; struct ath_frame_info *fi; struct ieee80211_tx_info *info; - struct ieee80211_vif *vif; struct ath_hw *ah = sc->sc_ah; if (sc->tx99_state || !ah->tpc_enabled) return MAX_RATE_POWER; skb = bf->bf_mpdu; - info = IEEE80211_SKB_CB(skb); - vif = info->control.vif; - - if (!vif) { - max_power = sc->cur_chan->cur_txpower; - goto out; - } - - if (vif->bss_conf.txpower_type != NL80211_TX_POWER_LIMITED) { - max_power = min_t(u8, sc->cur_chan->cur_txpower, - 2 * vif->bss_conf.txpower); - goto out; - } - fi = get_frame_info(skb); + info = IEEE80211_SKB_CB(skb); if (!AR_SREV_9300_20_OR_LATER(ah)) { int txpower = fi->tx_power; @@ -1161,25 +1147,26 @@ static u8 ath_get_rate_txpower(struct ath_softc *sc, struct ath_buf *bf, txpower -= 2; txpower = max(txpower, 0); - max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min_t(u8, max_power, txpower); + max_power = min_t(u8, ah->tx_power[rateidx], txpower); + + /* XXX: clamp minimum TX power at 1 for AR9160 since if + * max_power is set to 0, frames are transmitted at max + * TX power + */ + if (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) + max_power = 1; } else if (!bf->bf_state.bfs_paprd) { if (rateidx < 8 && (info->flags & IEEE80211_TX_CTL_STBC)) max_power = min_t(u8, ah->tx_power_stbc[rateidx], - 2 * vif->bss_conf.txpower); + fi->tx_power); else max_power = min_t(u8, ah->tx_power[rateidx], - 2 * vif->bss_conf.txpower); - max_power = min(max_power, fi->tx_power); + fi->tx_power); } else { max_power = ah->paprd_training_power; } -out: - /* XXX: clamp minimum TX power at 1 for AR9160 since if max_power - * is set to 0, frames are transmitted at max TX power - */ - return (!max_power && !AR_SREV_9280_20_OR_LATER(ah)) ? 1 : max_power; + + return max_power; } static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf, @@ -2129,6 +2116,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, struct ath_node *an = NULL; enum ath9k_key_type keytype; bool short_preamble = false; + u8 txpower; /* * We check if Short Preamble is needed for the CTS rate by @@ -2145,6 +2133,16 @@ static void setup_frame_info(struct ieee80211_hw *hw, if (sta) an = (struct ath_node *) sta->drv_priv; + if (tx_info->control.vif) { + struct ieee80211_vif *vif = tx_info->control.vif; + + txpower = 2 * vif->bss_conf.txpower; + } else { + struct ath_softc *sc = hw->priv; + + txpower = sc->cur_chan->cur_txpower; + } + memset(fi, 0, sizeof(*fi)); fi->txq = -1; if (hw_key) @@ -2155,7 +2153,7 @@ static void setup_frame_info(struct ieee80211_hw *hw, fi->keyix = ATH9K_TXKEYIX_INVALID; fi->keytype = keytype; fi->framelen = framelen; - fi->tx_power = MAX_RATE_POWER; + fi->tx_power = txpower; if (!rate) return; -- cgit From f0e9fc503a0d6c9d74ca5b6d1aaf87febbbd9b06 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 30 Apr 2015 21:47:42 -0400 Subject: drivers/net: include for modular stmmac_platform code This file is built off of a tristate Kconfig option and also contains modular function calls so it should explicitly include module.h to avoid compile breakage during header shuffles done in the future. Cc: Giuseppe Cavallaro Cc: netdev@vger.kernel.org Signed-off-by: Paul Gortmaker Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 705bbdf93940..68aec5c460db 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -23,6 +23,7 @@ *******************************************************************************/ #include +#include #include #include #include -- cgit From 4212b5433187d01b5ae83664b06e990a9116250f Mon Sep 17 00:00:00 2001 From: Vivien Didelot Date: Fri, 1 May 2015 10:43:52 -0400 Subject: net: dsa: mv88e6xxx: unregister mv88e6352 driver Add the missing unregister for the mv88e6352_switch_driver. Signed-off-by: Vivien Didelot Reviewed-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/dsa/mv88e6xxx.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/dsa/mv88e6xxx.c b/drivers/net/dsa/mv88e6xxx.c index af639ab4c55b..cf309aa92802 100644 --- a/drivers/net/dsa/mv88e6xxx.c +++ b/drivers/net/dsa/mv88e6xxx.c @@ -1469,6 +1469,9 @@ static void __exit mv88e6xxx_cleanup(void) #if IS_ENABLED(CONFIG_NET_DSA_MV88E6171) unregister_switch_driver(&mv88e6171_switch_driver); #endif +#if IS_ENABLED(CONFIG_NET_DSA_MV88E6352) + unregister_switch_driver(&mv88e6352_switch_driver); +#endif #if IS_ENABLED(CONFIG_NET_DSA_MV88E6123_61_65) unregister_switch_driver(&mv88e6123_61_65_switch_driver); #endif -- cgit From 59486329b46f31532ab032014fbaae72e9f190c3 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:38 -0700 Subject: fm10k: Do not assume budget will never be 0 for NAPI The netpoll path will call napi->poll with a budget of 0 in order to clean the Tx rings only. This change updates the fm10k driver so that it will correctly support that instead of cleaning 1 Rx frame if a budget of 0 is received. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/fm10k/fm10k_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c index 1b0661e3573b..c754b2027281 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c @@ -610,7 +610,7 @@ static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector, unsigned int total_bytes = 0, total_packets = 0; u16 cleaned_count = fm10k_desc_unused(rx_ring); - do { + while (likely(total_packets < budget)) { union fm10k_rx_desc *rx_desc; /* return some buffers to hardware, one at a time is too slow */ @@ -659,7 +659,7 @@ static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector, /* update budget accounting */ total_packets++; - } while (likely(total_packets < budget)); + } /* place incomplete frames back on ring for completion */ rx_ring->skb = skb; -- cgit From eb781397904e5d6b90c80463eaa9dc592831bdae Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:44 -0700 Subject: r8169: Do not use dev_kfree_skb in xmit path The function r8169_csum_workaround is called in the ndo_start_xmit path of the r8169 driver. As such it should not be using dev_kfree_skb as it is not irq safe, so instead we should be using dev_kfree_skb_any for freeing in the dropped path, and dev_consume_skb_any for any frames that were transmitted. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index c70ab40d8698..3df51faf18ae 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -6884,7 +6884,7 @@ static void r8169_csum_workaround(struct rtl8169_private *tp, rtl8169_start_xmit(nskb, tp->dev); } while (segs); - dev_kfree_skb(skb); + dev_consume_skb_any(skb); } else if (skb->ip_summed == CHECKSUM_PARTIAL) { if (skb_checksum_help(skb) < 0) goto drop; @@ -6896,7 +6896,7 @@ static void r8169_csum_workaround(struct rtl8169_private *tp, drop: stats = &tp->dev->stats; stats->tx_dropped++; - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); } } -- cgit From e7fcd5439ffd76e499b7ba4a2f8e99645addff3e Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 1 May 2015 10:34:50 -0700 Subject: ixgbevf: Use dev_kfree_skb_any in xmit path, not dev_kfree_skb With netpoll making use of the transmit function it is possible for the ndo_start_xmit function to be called with irqs disabled. As such we need to use dev_kfree_skb_any in the Tx cleanup path for frames that are dropped. Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c index a16d267fbce4..e71cdde9cb01 100644 --- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c +++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c @@ -3612,7 +3612,7 @@ static int ixgbevf_xmit_frame(struct sk_buff *skb, struct net_device *netdev) u8 *dst_mac = skb_header_pointer(skb, 0, 0, NULL); if (!dst_mac || is_link_local_ether_addr(dst_mac)) { - dev_kfree_skb(skb); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit From efdbd2b30caa65dd9e687853afa4d7ce8b39447e Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Fri, 1 May 2015 17:36:37 -0400 Subject: macvlan: Propagate promiscuity setting to lower devices. When a macvlan device is placed in promiscuous mode, it currently just sets it's multicast mask to permissive, but doesn't change the state of the lower device. As a result, not all multicast traffic can be received on such device. Additionally, none of a vlan traffic can be received on such device as well. This patch propagates the promiscuous mode setting to lower device so that lower device may receive all packets that macvlan may be interested in. Signed-off-by: Vladislav Yasevich Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index b227a13f6473..9f59f17dc317 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -599,10 +599,18 @@ static int macvlan_open(struct net_device *dev) goto del_unicast; } + if (dev->flags & IFF_PROMISC) { + err = dev_set_promiscuity(lowerdev, 1); + if (err < 0) + goto clear_multi; + } + hash_add: macvlan_hash_add(vlan); return 0; +clear_multi: + dev_set_allmulti(lowerdev, -1); del_unicast: dev_uc_del(lowerdev, dev->dev_addr); out: @@ -638,6 +646,9 @@ static int macvlan_stop(struct net_device *dev) if (dev->flags & IFF_ALLMULTI) dev_set_allmulti(lowerdev, -1); + if (dev->flags & IFF_PROMISC) + dev_set_promiscuity(lowerdev, -1); + dev_uc_del(lowerdev, dev->dev_addr); hash_del: @@ -696,6 +707,10 @@ static void macvlan_change_rx_flags(struct net_device *dev, int change) if (dev->flags & IFF_UP) { if (change & IFF_ALLMULTI) dev_set_allmulti(lowerdev, dev->flags & IFF_ALLMULTI ? 1 : -1); + if (change & IFF_PROMISC) + dev_set_promiscuity(lowerdev, + dev->flags & IFF_PROMISC ? 1 : -1); + } } -- cgit From 965b2aa78fbcb831acf4f669f494da201f4bcace Mon Sep 17 00:00:00 2001 From: Kamlakant Patel Date: Mon, 4 May 2015 14:39:49 +0530 Subject: net/smsc911x: fix irq resource allocation failure When smsc911x uses GPIO as the interrupt controller, and if both are loaded as modules, we get following error: "smsc911x: Could not allocate irq resource" This issue is because of smsc911x using platform_get_resource to get device tree based irq resource. commit "9ec36ca (of/irq: do irq resolution in platform_get_irq)" and commit "7085a7 (drivers: platform: parse IRQ flags from resources)" add support in platform_get_irq to resolve irq and irq_flags respectively for both modern device tree and legacy static platform data platforms. Modify smsc911x driver to use platform_get_irq to pick up irq resource correctly and use irq_get_trigger_type to get the IRQ trigger flags. Signed-off-by: Kamlakant Patel Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smsc911x.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smsc911x.c b/drivers/net/ethernet/smsc/smsc911x.c index 41047c9143d0..959aeeade0c9 100644 --- a/drivers/net/ethernet/smsc/smsc911x.c +++ b/drivers/net/ethernet/smsc/smsc911x.c @@ -2418,9 +2418,9 @@ static int smsc911x_drv_probe(struct platform_device *pdev) struct net_device *dev; struct smsc911x_data *pdata; struct smsc911x_platform_config *config = dev_get_platdata(&pdev->dev); - struct resource *res, *irq_res; + struct resource *res; unsigned int intcfg = 0; - int res_size, irq_flags; + int res_size, irq, irq_flags; int retval; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -2434,8 +2434,8 @@ static int smsc911x_drv_probe(struct platform_device *pdev) } res_size = resource_size(res); - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!irq_res) { + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { pr_warn("Could not allocate irq resource\n"); retval = -ENODEV; goto out_0; @@ -2455,8 +2455,8 @@ static int smsc911x_drv_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); pdata = netdev_priv(dev); - dev->irq = irq_res->start; - irq_flags = irq_res->flags & IRQF_TRIGGER_MASK; + dev->irq = irq; + irq_flags = irq_get_trigger_type(irq); pdata->ioaddr = ioremap_nocache(res->start, res_size); pdata->dev = dev; -- cgit From a2d4fcb8043402fd24aaef7e00d4c24b1151cda4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 4 May 2015 15:12:33 -0400 Subject: Revert "Revert "smc91x: retrieve IRQ and trigger flags in a modern way"" This reverts commit 8d7d9cca4390062ccd09ffd9fdb37d1c4eeea9ac. Now that the necessary infrastructure is really all there in the tree, we can put this change back in. Signed-off-by: David S. Miller --- drivers/net/ethernet/smsc/smc91x.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 14b363a25c02..630f0b7800e4 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2238,9 +2238,10 @@ static int smc_drv_probe(struct platform_device *pdev) const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; - struct resource *res, *ires; + struct resource *res; unsigned int __iomem *addr; unsigned long irq_flags = SMC_IRQ_FLAGS; + unsigned long irq_resflags; int ret; ndev = alloc_etherdev(sizeof(struct smc_local)); @@ -2332,16 +2333,19 @@ static int smc_drv_probe(struct platform_device *pdev) goto out_free_netdev; } - ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!ires) { + ndev->irq = platform_get_irq(pdev, 0); + if (ndev->irq <= 0) { ret = -ENODEV; goto out_release_io; } - - ndev->irq = ires->start; - - if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK) - irq_flags = ires->flags & IRQF_TRIGGER_MASK; + /* + * If this platform does not specify any special irqflags, or if + * the resource supplies a trigger, override the irqflags with + * the trigger flags from the resource. + */ + irq_resflags = irqd_get_trigger_type(irq_get_irq_data(ndev->irq)); + if (irq_flags == -1 || irq_resflags & IRQF_TRIGGER_MASK) + irq_flags = irq_resflags & IRQF_TRIGGER_MASK; ret = smc_request_attrib(pdev, ndev); if (ret) -- cgit From 0650c0b8d9efe5b1205116a2febcb984c6c98472 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Mon, 4 May 2015 12:34:12 +0300 Subject: bnx2x: Fix to prevent inner-reload Submit 909d9faae2a44 ("bnx2x: Prevent inner-reload while VFs exist") contained a bug - MTU change was not prevented by it; Instead, it `randomally' prevented bnx2x_resume() from running [harmless yet wrong]. This moves the check to its correct spot. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index a8bb8f664d3d..ec56a9b65dc3 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -4786,6 +4786,11 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu) { struct bnx2x *bp = netdev_priv(dev); + if (pci_num_vf(bp->pdev)) { + DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); + return -EPERM; + } + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { BNX2X_ERR("Can't perform change MTU during parity recovery\n"); return -EAGAIN; @@ -4938,11 +4943,6 @@ int bnx2x_resume(struct pci_dev *pdev) } bp = netdev_priv(dev); - if (pci_num_vf(bp->pdev)) { - DP(BNX2X_MSG_IOV, "VFs are enabled, can not change MTU\n"); - return -EPERM; - } - if (bp->recovery_state != BNX2X_RECOVERY_DONE) { BNX2X_ERR("Handling parity error recovery. Try again later\n"); return -EAGAIN; -- cgit From 7aab5159fa0100ee3f80d1b0f55cd7e9b5823270 Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Mon, 4 May 2015 10:57:16 -0700 Subject: hv_netvsc: remove unused variable in netvsc_send() With commit b56fc3c53654 ("hv_netvsc: Fix a bug in netvsc_start_xmit()"), skb variable is no longer used in netvsc_send. Remove variable and dead code that depended on it. Cc: Haiyang Zhang Cc: K. Y. Srinivasan Signed-off-by: Jerry Snitselaar Signed-off-by: Haiyang Zhang Signed-off-by: David S. Miller --- drivers/net/hyperv/netvsc.c | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index 2d9ef533cc48..ea091bc5ff09 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -826,7 +826,6 @@ int netvsc_send(struct hv_device *device, u16 q_idx = packet->q_idx; u32 pktlen = packet->total_data_buflen, msd_len = 0; unsigned int section_index = NETVSC_INVALID_INDEX; - struct sk_buff *skb = NULL; unsigned long flag; struct multi_send_data *msdp; struct hv_netvsc_packet *msd_send = NULL, *cur_send = NULL; @@ -924,12 +923,8 @@ int netvsc_send(struct hv_device *device, if (cur_send) ret = netvsc_send_pkt(cur_send, net_device); - if (ret != 0) { - if (section_index != NETVSC_INVALID_INDEX) - netvsc_free_send_slot(net_device, section_index); - } else if (skb) { - dev_kfree_skb_any(skb); - } + if (ret != 0 && section_index != NETVSC_INVALID_INDEX) + netvsc_free_send_slot(net_device, section_index); return ret; } -- cgit From cae0633872fc8b0c34930dd2862856563bce58ec Mon Sep 17 00:00:00 2001 From: Eran Ben Elisha Date: Tue, 5 May 2015 17:07:11 +0300 Subject: net/mlx4_en: Fix off-by-one in counters manipulation This caused the en_stats_adder helper to accumulate a field which is not related to the counter, fix that. Fixes: a3333b35da16 ('net/mlx4_en: Moderate ethtool callback to show [..]') Signed-off-by: Eran Ben Elisha Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index 54f0e5ab2e55..0a56f010c846 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -139,7 +139,7 @@ static unsigned long en_stats_adder(__be64 *start, __be64 *next, int num) int i; int offset = next - start; - for (i = 0; i <= num; i++) { + for (i = 0; i < num; i++) { ret += be64_to_cpu(*curr); curr += offset; } -- cgit From 2d3c739739e64619f4846746a06ff0a6adf8a155 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Tue, 5 May 2015 17:07:12 +0300 Subject: net/mlx4_core: Work properly with EQ numbers > 256 in SRIOV The Firmware uses dynamic EQs allocation based on number of VFs and max EQs that can be allocated. As a result, VF can have EQ numbers that are larger than 256. According to the firmware spec, the max value is limited to be 1024 (10 bits), adapt the relevant code accordingly. This bug was impossible to hit prior to commit 7ae0e400cd93 ("net/mlx4_core: Flexible (asymmetric) allocation of EQs and MSI-X vectors for PF/VFs") which actually enables large number of EQs for VFs. Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/resource_tracker.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index c7f28bf4b8e2..92fce1b98558 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -2845,7 +2845,7 @@ int mlx4_SW2HW_EQ_wrapper(struct mlx4_dev *dev, int slave, { int err; int eqn = vhcr->in_modifier; - int res_id = (slave << 8) | eqn; + int res_id = (slave << 10) | eqn; struct mlx4_eq_context *eqc = inbox->buf; int mtt_base = eq_get_mtt_addr(eqc) / dev->caps.mtt_entry_sz; int mtt_size = eq_get_mtt_size(eqc); @@ -3051,7 +3051,7 @@ int mlx4_HW2SW_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int eqn = vhcr->in_modifier; - int res_id = eqn | (slave << 8); + int res_id = eqn | (slave << 10); struct res_eq *eq; int err; @@ -3108,7 +3108,7 @@ int mlx4_GEN_EQE(struct mlx4_dev *dev, int slave, struct mlx4_eqe *eqe) return 0; mutex_lock(&priv->mfunc.master.gen_eqe_mutex[slave]); - res_id = (slave << 8) | event_eq->eqn; + res_id = (slave << 10) | event_eq->eqn; err = get_res(dev, slave, res_id, RES_EQ, &req); if (err) goto unlock; @@ -3131,7 +3131,7 @@ int mlx4_GEN_EQE(struct mlx4_dev *dev, int slave, struct mlx4_eqe *eqe) memcpy(mailbox->buf, (u8 *) eqe, 28); - in_modifier = (slave & 0xff) | ((event_eq->eqn & 0xff) << 16); + in_modifier = (slave & 0xff) | ((event_eq->eqn & 0x3ff) << 16); err = mlx4_cmd(dev, mailbox->dma, in_modifier, 0, MLX4_CMD_GEN_EQE, MLX4_CMD_TIME_CLASS_B, @@ -3157,7 +3157,7 @@ int mlx4_QUERY_EQ_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_cmd_info *cmd) { int eqn = vhcr->in_modifier; - int res_id = eqn | (slave << 8); + int res_id = eqn | (slave << 10); struct res_eq *eq; int err; @@ -4714,13 +4714,13 @@ static void rem_slave_eqs(struct mlx4_dev *dev, int slave) break; case RES_EQ_HW: - err = mlx4_cmd(dev, slave, eqn & 0xff, + err = mlx4_cmd(dev, slave, eqn & 0x3ff, 1, MLX4_CMD_HW2SW_EQ, MLX4_CMD_TIME_CLASS_A, MLX4_CMD_NATIVE); if (err) mlx4_dbg(dev, "rem_slave_eqs: failed to move slave %d eqs %d to SW ownership\n", - slave, eqn); + slave, eqn & 0x3ff); atomic_dec(&eq->mtt->ref_count); state = RES_EQ_RESERVED; break; -- cgit From c0a06ee185f2b785c7bd44c4fb6fcae80f7d1a54 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 13 Apr 2015 18:15:10 +0900 Subject: igb: Fix oops on changing number of rings When changing the number of rings by ethtool -L, q_vectors are reused, which causes oops because of uninitialized pointers. - When an rx is reused as a tx, q_vector->rx.ring is not set to NULL, which misleads igb_poll() to determine that it has an rx ring although it actually points to the tx ring. - When a tx is reused as an rx, q_vector->rx.ring->skb (q_vector->ring[0].skb) has a value that was used as tx_stats before. Fix these problems by zeroing it out on reuseing it. Fixes: 02ef6e1d0b00 ("igb: Fix queue allocation method to accommodate changing during runtime") Signed-off-by: Toshiaki Makita Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 8457d0306e3a..783d60eafcd6 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1207,6 +1207,8 @@ static int igb_alloc_q_vector(struct igb_adapter *adapter, q_vector = adapter->q_vector[v_idx]; if (!q_vector) q_vector = kzalloc(size, GFP_KERNEL); + else + memset(q_vector, 0, size); if (!q_vector) return -ENOMEM; -- cgit From 2439fc4d71f71b47c8ace1f42eb46039222282a0 Mon Sep 17 00:00:00 2001 From: Toshiaki Makita Date: Mon, 13 Apr 2015 18:15:11 +0900 Subject: igb: Fix NULL assignment to incorrect variable in igb_reset_q_vector adapter->tx_ring is set to NULL where rx_ring should be. Fixes: 5536d2102a2d ("igb: Combine q_vector and ring allocation into a single function") Signed-off-by: Toshiaki Makita Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 783d60eafcd6..a0a9b1fcb5e8 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -1036,7 +1036,7 @@ static void igb_reset_q_vector(struct igb_adapter *adapter, int v_idx) adapter->tx_ring[q_vector->tx.ring->queue_index] = NULL; if (q_vector->rx.ring) - adapter->tx_ring[q_vector->rx.ring->queue_index] = NULL; + adapter->rx_ring[q_vector->rx.ring->queue_index] = NULL; netif_napi_del(&q_vector->napi); -- cgit From bfbb92c446700da645e4834fb01439097846ce1e Mon Sep 17 00:00:00 2001 From: Nathan Sullivan Date: Tue, 5 May 2015 15:00:25 -0500 Subject: net: macb: Handle the RXUBR interrupt on all devices The same hardware issue the at91 must work around applies to at least the Zynq ethernet, and possibly more devices. The driver also needs to handle the RXUBR interrupt since it turns it on with MACB_RX_INT_FLAGS anyway. Signed-off-by: Nathan Sullivan Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index 4104d49f005d..61aa570aad9a 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -981,7 +981,7 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) struct macb_queue *queue = dev_id; struct macb *bp = queue->bp; struct net_device *dev = bp->dev; - u32 status; + u32 status, ctrl; status = queue_readl(queue, ISR); @@ -1037,6 +1037,15 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id) * add that if/when we get our hands on a full-blown MII PHY. */ + if (status & MACB_BIT(RXUBR)) { + ctrl = macb_readl(bp, NCR); + macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE)); + macb_writel(bp, NCR, ctrl | MACB_BIT(RE)); + + if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE) + macb_writel(bp, ISR, MACB_BIT(RXUBR)); + } + if (status & MACB_BIT(ISR_ROVR)) { /* We missed at least one packet */ if (macb_is_gem(bp)) -- cgit From 1006da19ea6603135773a79f09e4e931be460429 Mon Sep 17 00:00:00 2001 From: Vasily Titskiy Date: Wed, 6 May 2015 10:31:21 -0400 Subject: drivers/net/usb: Add support for 'Lenovo OneLink Pro Dock' This device is sold as 'Lenovo OneLink Pro Dock'. Chipset is RTL8153 and works with r8152. Signed-off-by: Vasily Titskiy Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index ac4d03b328b1..aafa1a1898e4 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -4116,6 +4116,7 @@ static struct usb_device_id rtl8152_table[] = { {REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153)}, {REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101)}, {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7205)}, + {REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f)}, {} }; -- cgit From 74a78b15e6e3dd909a39e0d99dfa0268c126e2c6 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 May 2015 09:04:40 +0200 Subject: net: amd-xgbe: Add hardware dependency The amd-xgbe driver currently only works with the Seattle SoC, which is ARM64 architecture, so there is no point in building this driver on other architectures except for build testing purpose. The dependency list can be updated later if the driver ever supports other architectures. Signed-off-by: Jean Delvare Cc: Tom Lendacky Cc: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/Kconfig | 1 + drivers/net/phy/Kconfig | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/amd/Kconfig b/drivers/net/ethernet/amd/Kconfig index 089c269637b7..426916036151 100644 --- a/drivers/net/ethernet/amd/Kconfig +++ b/drivers/net/ethernet/amd/Kconfig @@ -180,6 +180,7 @@ config SUNLANCE config AMD_XGBE tristate "AMD 10GbE Ethernet driver" depends on (OF_NET || ACPI) && HAS_IOMEM && HAS_DMA + depends on ARM64 || COMPILE_TEST select PHYLIB select AMD_XGBE_PHY select BITREVERSE diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 8fadaa14b9f0..70641d2c0429 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -27,6 +27,7 @@ config AMD_PHY config AMD_XGBE_PHY tristate "Driver for the AMD 10GbE (amd-xgbe) PHYs" depends on (OF || ACPI) && HAS_IOMEM + depends on ARM64 || COMPILE_TEST ---help--- Currently supports the AMD 10GbE PHY -- cgit From ccad725ccb068851fbce2022b2a51fa458d1eac1 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 6 May 2015 09:14:34 +0200 Subject: net: xgene_enet: Set hardware dependency The xgene_enet driver is only useful on X-Gene SoC. Signed-off-by: Jean Delvare Cc: Iyappan Subramanian Cc: Keyur Chudgar Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/apm/xgene/Kconfig b/drivers/net/ethernet/apm/xgene/Kconfig index f4054d242f3c..19e38afbc5ee 100644 --- a/drivers/net/ethernet/apm/xgene/Kconfig +++ b/drivers/net/ethernet/apm/xgene/Kconfig @@ -1,6 +1,7 @@ config NET_XGENE tristate "APM X-Gene SoC Ethernet Driver" depends on HAS_DMA + depends on ARCH_XGENE || COMPILE_TEST select PHYLIB help This is the Ethernet driver for the on-chip ethernet interface on the -- cgit From 240b23c4269777abba4eba43acd1f53ec530bb7d Mon Sep 17 00:00:00 2001 From: Tony Camuso Date: Wed, 6 May 2015 09:09:18 -0400 Subject: netxen_nic: use spin_[un]lock_bh around tx_clean_lock (2) This patch should have been part of the previous patch having the same summary. See http://marc.info/?l=linux-kernel&m=143039470103795&w=2 Unfortunately, I didn't check to see where else this lock was used before submitting that patch. This should take care of it for netxen_nic, as I did a thorough search this time. To recap from the original patch; although testing this driver with DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled did not produce any traces, it would be more prudent in the case of tx_clean_lock to use _bh versions of spin_[un]lock, since this lock is manipulated in both the process and softirq contexts. This patch was tested for functionality and regressions with netperf and DEBUG_LOCKDEP and DEBUG_SPINLOCK enabled. Signed-off-by: Tony Camuso Acked-By: Neil Horman Acked-By: Manish Chopra Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c index 8da7c3faf817..7b43a3b4abdc 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c @@ -1764,7 +1764,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) int done = 0; struct nx_host_tx_ring *tx_ring = adapter->tx_ring; - if (!spin_trylock(&adapter->tx_clean_lock)) + if (!spin_trylock_bh(&adapter->tx_clean_lock)) return 1; sw_consumer = tx_ring->sw_consumer; @@ -1819,7 +1819,7 @@ int netxen_process_cmd_ring(struct netxen_adapter *adapter) */ hw_consumer = le32_to_cpu(*(tx_ring->hw_consumer)); done = (sw_consumer == hw_consumer); - spin_unlock(&adapter->tx_clean_lock); + spin_unlock_bh(&adapter->tx_clean_lock); return done; } -- cgit From 3e4336a65ab6b45cbac10b8347c8f8951fec515d Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 6 May 2015 15:09:40 +0200 Subject: usbnet: avoid integer overflow in start_xmit transfer_buffer_length is of type u32. It's therefore wrong to assign it to a signed integer. This patch avoids the overflow. It's worth noting that entry->length here is a long; perhaps it would be beneficial at somepoint to change this to be unsigned as well, if nothing else relies on its signedness for error conditions or the like. Signed-off-by: Jason A. Donenfeld Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 733f4feb2ef3..3c86b107275a 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1285,7 +1285,7 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, struct net_device *net) { struct usbnet *dev = netdev_priv(net); - int length; + unsigned int length; struct urb *urb = NULL; struct skb_data *entry; struct driver_info *info = dev->driver_info; @@ -1413,7 +1413,7 @@ not_drop: } } else netif_dbg(dev, tx_queued, dev->net, - "> tx, len %d, type 0x%x\n", length, skb->protocol); + "> tx, len %u, type 0x%x\n", length, skb->protocol); #ifdef CONFIG_PM deferred: #endif -- cgit From cd9c39977754d9602b5783a44f4af09530a58254 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 7 May 2015 20:37:10 +0200 Subject: bnx2x: limit fw delay in kdump to 5s after boot Commit 12a8541d5c82 "bnx2x: Delay during kdump load" added a 5 seconds delay to bnx2x's probe function in the kdump case to let the firmware realize the old driver is gone. The problem with the delay is that it is per-device, so if you have several bnx2x NICs in NPAR mode, the delays can accumulate to minutes. Fix it by adjusting the delay so that we do not wait more than necessary, i.e. no more delaying after 5 seconds of kernel boot time. Signed-off-by: Michal Schmidt Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 556dcc162a62..fd52ce95127e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -13371,8 +13371,13 @@ static int bnx2x_init_one(struct pci_dev *pdev, /* Management FW 'remembers' living interfaces. Allow it some time * to forget previously living interfaces, allowing a proper re-load. */ - if (is_kdump_kernel()) - msleep(5000); + if (is_kdump_kernel()) { + ktime_t now = ktime_get_boottime(); + ktime_t fw_ready_time = ktime_set(5, 0); + + if (ktime_before(now, fw_ready_time)) + msleep(ktime_ms_delta(fw_ready_time, now)); + } /* An estimated maximum supported CoS number according to the chip * version. -- cgit From 7c0c82682873354490a5b67c77331bd65a356236 Mon Sep 17 00:00:00 2001 From: Bert Vermeulen Date: Fri, 8 May 2015 16:18:49 +0200 Subject: net: mdio-gpio: Allow for unspecified bus id When the bus id was supplied via a struct platform_device, the driver wasn't handling -1 to mean an unspecified id of the only instance of this driver, as the platform spec requires. Signed-off-by: Bert Vermeulen Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/mdio-gpio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c index c9cb486c753d..53d18150f4e2 100644 --- a/drivers/net/phy/mdio-gpio.c +++ b/drivers/net/phy/mdio-gpio.c @@ -168,7 +168,10 @@ static struct mii_bus *mdio_gpio_bus_init(struct device *dev, if (!new_bus->irq[i]) new_bus->irq[i] = PHY_POLL; - snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); + if (bus_id != -1) + snprintf(new_bus->id, MII_BUS_ID_SIZE, "gpio-%x", bus_id); + else + strncpy(new_bus->id, "gpio", MII_BUS_ID_SIZE); if (devm_gpio_request(dev, bitbang->mdc, "mdc")) goto out_free_bus; -- cgit From 268be0f7a7d9b3644bcb99568efba13cb208b627 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sat, 9 May 2015 07:58:09 +0000 Subject: net: qca_spi: Fix possible race during probe Registering the netdev before setting the priv data is unsafe. So fix this possible race by setting the priv data first. Signed-off-by: Stefan Wahren Cc: # v3.18+ Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/qca_spi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c index f66641d961e3..6af028d5f9bc 100644 --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -912,6 +912,8 @@ qca_spi_probe(struct spi_device *spi_device) qca->spi_dev = spi_device; qca->legacy_mode = legacy_mode; + spi_set_drvdata(spi_device, qcaspi_devs); + mac = of_get_mac_address(spi_device->dev.of_node); if (mac) @@ -944,8 +946,6 @@ qca_spi_probe(struct spi_device *spi_device) return -EFAULT; } - spi_set_drvdata(spi_device, qcaspi_devs); - qcaspi_init_device_debugfs(qca); return 0; -- cgit From 665a6cd809f43eec2b51413816a4178a3390a870 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 9 May 2015 23:08:38 +0200 Subject: pppoe: drop pppoe device in pppoe_unbind_sock_work After receiving a PADT and the socket is closed, user space will no longer drop the reference to the pppoe device. This leads to errors like this: [ 488.570000] unregister_netdevice: waiting for eth0.2 to become free. Usage count = 2 Fixes: 287f3a943fe ("pppoe: Use workqueue to die properly when a PADT is received") Signed-off-by: Felix Fietkau Signed-off-by: David S. Miller --- drivers/net/ppp/pppoe.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/net') diff --git a/drivers/net/ppp/pppoe.c b/drivers/net/ppp/pppoe.c index aa1dd926623a..b62a5e3a1c65 100644 --- a/drivers/net/ppp/pppoe.c +++ b/drivers/net/ppp/pppoe.c @@ -465,6 +465,10 @@ static void pppoe_unbind_sock_work(struct work_struct *work) struct sock *sk = sk_pppox(po); lock_sock(sk); + if (po->pppoe_dev) { + dev_put(po->pppoe_dev); + po->pppoe_dev = NULL; + } pppox_unbind_sock(sk); release_sock(sk); sock_put(sk); -- cgit From 44d4f8d74e1dd07f248f35d74419f07d44f326e6 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Tue, 12 May 2015 08:06:15 +0200 Subject: net: ll_temac: Fix DMA map size bug DMA allocates skb->len instead of headlen which is used for DMA. Signed-off-by: Michal Simek Signed-off-by: David S. Miller --- drivers/net/ethernet/xilinx/ll_temac_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c index 690a4c36b316..af2694dc6f90 100644 --- a/drivers/net/ethernet/xilinx/ll_temac_main.c +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c @@ -707,8 +707,8 @@ static int temac_start_xmit(struct sk_buff *skb, struct net_device *ndev) cur_p->app0 |= STS_CTRL_APP0_SOP; cur_p->len = skb_headlen(skb); - cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb->len, - DMA_TO_DEVICE); + cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); cur_p->app4 = (unsigned long)skb; for (ii = 0; ii < num_frag; ii++) { -- cgit From bced870152161435cc59a53e77f3699f8e8f22ca Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Tue, 12 May 2015 09:43:14 +0200 Subject: net: phy: micrel: Fix regression in kszphy_probe Don't do clock-mode-select if clk == NULL, since when building without CONFIG_HAVE_CLK, clk_get returns NULL and clk_get_rate returns 0. Doing clock-mode-select in this cause causes kszphy_probe to return -EINVAL and thus prevents the device from being probed. The original code (before regression) would return 0 when building without CONFIG_HAVE_CLK. Cc: stable # 3.18+ Fixes: 1fadee0c3645 ("net/phy: micrel: Add clock support for KSZ8021/KSZ8031") Reviewed-by: Fabio Estevam Reviewed-by: Johan Hovold Signed-off-by: Niklas Cassel Signed-off-by: David S. Miller --- drivers/net/phy/micrel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/net') diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 1190fd8f0088..ebdc357c5131 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -548,7 +548,8 @@ static int kszphy_probe(struct phy_device *phydev) } clk = devm_clk_get(&phydev->dev, "rmii-ref"); - if (!IS_ERR(clk)) { + /* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */ + if (!IS_ERR_OR_NULL(clk)) { unsigned long rate = clk_get_rate(clk); bool rmii_ref_clk_sel_25_mhz; -- cgit From 5684044f8062617dcc45ed8b2fb3ec6e02f14370 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 12 May 2015 09:36:59 -0600 Subject: e1000e: Add pm_qos header Commit e2c6544829f moved pm_qos_req to e1000_adapter. Add the header file that defines the struct. Signed-off-by: David Ahern Cc: Thomas Graf Cc: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/e1000e/e1000.h | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net') diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h index 5d9ceb17b4cb..0abc942c966e 100644 --- a/drivers/net/ethernet/intel/e1000e/e1000.h +++ b/drivers/net/ethernet/intel/e1000e/e1000.h @@ -40,6 +40,7 @@ #include #include #include +#include #include "hw.h" struct e1000_info; -- cgit