From 3a93f2a9f4d8f73d74c0e552feb68a10f778a219 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 10 Nov 2010 14:38:29 +0000 Subject: regulator: Report actual configured voltage to set_voltage() Change the interface used by set_voltage() to report the selected value to the regulator core in terms of a selector used by list_voltage(). This allows the regulator core to know the voltage that was chosen without having to do an explict get_voltage(), which would be much more expensive as it will generally access hardware. Signed-off-by: Mark Brown Signed-off-by: Liam Girdwood --- drivers/regulator/max8649.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/regulator/max8649.c') diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index 6b60a9c0366b..30eb9e54f7ec 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -155,7 +155,7 @@ static int max8649_get_voltage(struct regulator_dev *rdev) } static int max8649_set_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV) + int min_uV, int max_uV, unsigned *selector) { struct max8649_regulator_info *info = rdev_get_drvdata(rdev); unsigned char data, mask; @@ -168,6 +168,7 @@ static int max8649_set_voltage(struct regulator_dev *rdev, data = (min_uV - MAX8649_DCDC_VMIN + MAX8649_DCDC_STEP - 1) / MAX8649_DCDC_STEP; mask = MAX8649_VOL_MASK; + *selector = data & mask; return max8649_set_bits(info->i2c, info->vol_reg, mask, data); } -- cgit