From 9f8e32dfca2aab9dea8a9db335e3a783b0035507 Mon Sep 17 00:00:00 2001
From: Jaejoong Kim <climbbb.kim@gmail.com>
Date: Fri, 20 Oct 2017 16:29:15 +0900
Subject: usb: misc: usbtest: remove duplicate & operation

usb_endpoint_maxp() has an inline keyword and searches for bits[10:0]
by & operation with 0x7ff. So, we can remove the duplicate & operation
with 0x7ff.

Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usbtest.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index b3fc602b2e24..3639e00a51a0 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1909,7 +1909,7 @@ static struct urb *iso_alloc_urb(
 
 	if (bytes < 0 || !desc)
 		return NULL;
-	maxp = 0x7ff & usb_endpoint_maxp(desc);
+	maxp = usb_endpoint_maxp(desc);
 	maxp *= usb_endpoint_maxp_mult(desc);
 	packets = DIV_ROUND_UP(bytes, maxp);
 
-- 
cgit 


From 7fcf55847178c644f3bbe127b72a0c6dc378419a Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:04 +0300
Subject: usb: usb251xb: Add USB2517i specific struct and IDs

There are USB2517 and USB2517i hubs, which have almost the same
registers space as already supported USB251xBi series. The difference
it in DIDs and in a few functions. This patch adds the USB2517/i data
structures to the driver, so it would have different setting depending
on the device discovered on i2c-bus.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/Kconfig    |  4 ++--
 drivers/usb/misc/usb251xb.c | 23 +++++++++++++++++++++--
 2 files changed, 23 insertions(+), 4 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 0f9f25db9163..68d2f2cd17dd 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -238,8 +238,8 @@ config USB_HUB_USB251XB
 	depends on I2C
 	help
 	  This option enables support for configuration via SMBus of the
-	  Microchip USB251xB/xBi USB 2.0 Hub Controller series.
-	  Configuration parameters may be set in devicetree or platform data.
+	  Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
+	  parameters may be set in devicetree or platform data.
 	  Say Y or M here if you need to configure such a device via SMBus.
 
 config USB_HSIC_USB3503
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 135c91c434bf..1bfdad832e85 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -38,6 +38,7 @@
 #define USB251XB_DEF_PRODUCT_ID_12	0x2512 /* USB2512B/12Bi */
 #define USB251XB_DEF_PRODUCT_ID_13	0x2513 /* USB2513B/13Bi */
 #define USB251XB_DEF_PRODUCT_ID_14	0x2514 /* USB2514B/14Bi */
+#define USB251XB_DEF_PRODUCT_ID_17	0x2517 /* USB2517/17i */
 
 #define USB251XB_ADDR_DEVICE_ID_LSB	0x04
 #define USB251XB_ADDR_DEVICE_ID_MSB	0x05
@@ -82,7 +83,7 @@
 
 #define USB251XB_ADDR_PRODUCT_STRING_LEN	0x14
 #define USB251XB_ADDR_PRODUCT_STRING		0x54
-#define USB251XB_DEF_PRODUCT_STRING		"USB251xB/xBi"
+#define USB251XB_DEF_PRODUCT_STRING		"USB251xB/xBi/7i"
 
 #define USB251XB_ADDR_SERIAL_STRING_LEN		0x15
 #define USB251XB_ADDR_SERIAL_STRING		0x92
@@ -185,6 +186,16 @@ static const struct usb251xb_data usb2514bi_data = {
 	.product_str = "USB2514Bi",
 };
 
+static const struct usb251xb_data usb2517_data = {
+	.product_id = 0x2517,
+	.product_str = "USB2517",
+};
+
+static const struct usb251xb_data usb2517i_data = {
+	.product_id = 0x2517,
+	.product_str = "USB2517i",
+};
+
 static void usb251xb_reset(struct usb251xb *hub, int state)
 {
 	if (!gpio_is_valid(hub->gpio_reset))
@@ -509,6 +520,12 @@ static const struct of_device_id usb251xb_of_match[] = {
 	}, {
 		.compatible = "microchip,usb2514bi",
 		.data = &usb2514bi_data,
+	}, {
+		.compatible = "microchip,usb2517",
+		.data = &usb2517_data,
+	}, {
+		.compatible = "microchip,usb2517i",
+		.data = &usb2517i_data,
 	}, {
 		/* sentinel */
 	}
@@ -573,6 +590,8 @@ static const struct i2c_device_id usb251xb_id[] = {
 	{ "usb2513bi", 0 },
 	{ "usb2514b", 0 },
 	{ "usb2514bi", 0 },
+	{ "usb2517", 0 },
+	{ "usb2517i", 0 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(i2c, usb251xb_id);
@@ -589,5 +608,5 @@ static struct i2c_driver usb251xb_i2c_driver = {
 module_i2c_driver(usb251xb_i2c_driver);
 
 MODULE_AUTHOR("Richard Leitner <richard.leitner@skidata.com>");
-MODULE_DESCRIPTION("USB251xB/xBi USB 2.0 Hub Controller Driver");
+MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
 MODULE_LICENSE("GPL");
-- 
cgit 


From 384811286f2db6845758eb5789b0dec015d40719 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:05 +0300
Subject: usb: usb251xb: Add USB251x specific port count setting

USB251xb as well as USB2517 datasheet states, that all these
hubs differ by number of ports declared as the last digit in the
model name. So USB2512 got two ports, USB2513 - three, and so on.
Such setting must be reflected in the device specific data
structure and corresponding dts property should be checked whether
it doesn't get out of available ports.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 1bfdad832e85..e49158bb3a02 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -153,46 +153,55 @@ struct usb251xb {
 
 struct usb251xb_data {
 	u16 product_id;
+	u8 port_cnt;
 	char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
 };
 
 static const struct usb251xb_data usb2512b_data = {
 	.product_id = 0x2512,
+	.port_cnt = 2,
 	.product_str = "USB2512B",
 };
 
 static const struct usb251xb_data usb2512bi_data = {
 	.product_id = 0x2512,
+	.port_cnt = 2,
 	.product_str = "USB2512Bi",
 };
 
 static const struct usb251xb_data usb2513b_data = {
 	.product_id = 0x2513,
+	.port_cnt = 3,
 	.product_str = "USB2513B",
 };
 
 static const struct usb251xb_data usb2513bi_data = {
 	.product_id = 0x2513,
+	.port_cnt = 3,
 	.product_str = "USB2513Bi",
 };
 
 static const struct usb251xb_data usb2514b_data = {
 	.product_id = 0x2514,
+	.port_cnt = 4,
 	.product_str = "USB2514B",
 };
 
 static const struct usb251xb_data usb2514bi_data = {
 	.product_id = 0x2514,
+	.port_cnt = 4,
 	.product_str = "USB2514Bi",
 };
 
 static const struct usb251xb_data usb2517_data = {
 	.product_id = 0x2517,
+	.port_cnt = 7,
 	.product_str = "USB2517",
 };
 
 static const struct usb251xb_data usb2517i_data = {
 	.product_id = 0x2517,
+	.port_cnt = 7,
 	.product_str = "USB2517i",
 };
 
@@ -421,8 +430,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		for (i = 0; i < len / sizeof(u32); i++) {
 			u32 port = be32_to_cpu(cproperty_u32[i]);
 
-			if ((port >= 1) && (port <= 4))
+			if ((port >= 1) && (port <= data->port_cnt))
 				hub->non_rem_dev |= BIT(port);
+			else
+				dev_warn(dev, "NRD port %u doesn't exist\n",
+					port);
 		}
 	}
 
@@ -432,8 +444,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		for (i = 0; i < len / sizeof(u32); i++) {
 			u32 port = be32_to_cpu(cproperty_u32[i]);
 
-			if ((port >= 1) && (port <= 4))
+			if ((port >= 1) && (port <= data->port_cnt))
 				hub->port_disable_sp |= BIT(port);
+			else
+				dev_warn(dev, "PDS port %u doesn't exist\n",
+					port);
 		}
 	}
 
@@ -443,8 +458,11 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		for (i = 0; i < len / sizeof(u32); i++) {
 			u32 port = be32_to_cpu(cproperty_u32[i]);
 
-			if ((port >= 1) && (port <= 4))
+			if ((port >= 1) && (port <= data->port_cnt))
 				hub->port_disable_bp |= BIT(port);
+			else
+				dev_warn(dev, "PDB port %u doesn't exist\n",
+					port);
 		}
 	}
 
-- 
cgit 


From db234b9a1b571a5f57917a3a0aeb7d53d9e1aa75 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:06 +0300
Subject: usb: usb251xb: Add 5,6,7 ports mapping def setting

USB2517 got three additionl downstream ports, which can
as well be mapped to another logical ports. USB251xb driver
currently doesn't fully support such setting configuration
from dts file. This patch doesn't change this, but adds
usb2517 spcific ports default liner mapping.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index e49158bb3a02..202e931c697a 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -103,7 +103,11 @@
 #define USB251XB_ADDR_PORT_MAP_12	0xFB
 #define USB251XB_DEF_PORT_MAP_12	0x00
 #define USB251XB_ADDR_PORT_MAP_34	0xFC
-#define USB251XB_DEF_PORT_MAP_34	0x00 /* USB2513B/i & USB2514B/i only */
+#define USB251XB_DEF_PORT_MAP_34	0x00 /* USB251{3B/i,4B/i,7/i} only */
+#define USB251XB_ADDR_PORT_MAP_56	0xFD
+#define USB251XB_DEF_PORT_MAP_56	0x00 /* USB2517/i only */
+#define USB251XB_ADDR_PORT_MAP_7	0xFE
+#define USB251XB_DEF_PORT_MAP_7		0x00 /* USB2517/i only */
 
 #define USB251XB_ADDR_STATUS_COMMAND		0xFF
 #define USB251XB_STATUS_COMMAND_SMBUS_DOWN	0x04
@@ -148,6 +152,8 @@ struct usb251xb {
 	u8  port_swap;
 	u8  port_map12;
 	u8  port_map34;
+	u8  port_map56;
+	u8  port_map7;
 	u8  status;
 };
 
@@ -277,6 +283,8 @@ static int usb251xb_connect(struct usb251xb *hub)
 	i2c_wb[USB251XB_ADDR_PORT_SWAP]         = hub->port_swap;
 	i2c_wb[USB251XB_ADDR_PORT_MAP_12]       = hub->port_map12;
 	i2c_wb[USB251XB_ADDR_PORT_MAP_34]       = hub->port_map34;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_56]       = hub->port_map56;
+	i2c_wb[USB251XB_ADDR_PORT_MAP_7]        = hub->port_map7;
 	i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH;
 
 	usb251xb_reset(hub, 1);
@@ -515,6 +523,8 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	hub->port_swap = USB251XB_DEF_PORT_SWAP;
 	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
 	hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
+	hub->port_map56 = USB251XB_DEF_PORT_MAP_56;
+	hub->port_map7  = USB251XB_DEF_PORT_MAP_7;
 
 	return 0;
 }
-- 
cgit 


From ccdddc0343b8a1955ca9217e02d693546f792392 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:07 +0300
Subject: usb: usb251xb: Add 5,6,7 ports boost settings

USB electrical signaling drive strength boost bit is also supported
by USB2517 hub. Since it got three addition ports, the designers
needed to add one more register for initialization. It turned out
to be formerly reserved 0xF7. As before we just initialize it with
default zeros.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 202e931c697a..530ef13b353d 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -94,8 +94,10 @@
 
 #define USB251XB_ADDR_BOOST_UP	0xF6
 #define USB251XB_DEF_BOOST_UP	0x00
-#define USB251XB_ADDR_BOOST_X	0xF8
-#define USB251XB_DEF_BOOST_X	0x00
+#define USB251XB_ADDR_BOOST_57	0xF7
+#define USB251XB_DEF_BOOST_57	0x00
+#define USB251XB_ADDR_BOOST_14	0xF8
+#define USB251XB_DEF_BOOST_14	0x00
 
 #define USB251XB_ADDR_PORT_SWAP	0xFA
 #define USB251XB_DEF_PORT_SWAP	0x00
@@ -148,7 +150,8 @@ struct usb251xb {
 	char serial[USB251XB_STRING_BUFSIZE];
 	u8  bat_charge_en;
 	u8  boost_up;
-	u8  boost_x;
+	u8  boost_57;
+	u8  boost_14;
 	u8  port_swap;
 	u8  port_map12;
 	u8  port_map34;
@@ -279,7 +282,8 @@ static int usb251xb_connect(struct usb251xb *hub)
 	       USB251XB_STRING_BUFSIZE);
 	i2c_wb[USB251XB_ADDR_BATTERY_CHARGING_ENABLE] = hub->bat_charge_en;
 	i2c_wb[USB251XB_ADDR_BOOST_UP]          = hub->boost_up;
-	i2c_wb[USB251XB_ADDR_BOOST_X]           = hub->boost_x;
+	i2c_wb[USB251XB_ADDR_BOOST_57]          = hub->boost_57;
+	i2c_wb[USB251XB_ADDR_BOOST_14]          = hub->boost_14;
 	i2c_wb[USB251XB_ADDR_PORT_SWAP]         = hub->port_swap;
 	i2c_wb[USB251XB_ADDR_PORT_MAP_12]       = hub->port_map12;
 	i2c_wb[USB251XB_ADDR_PORT_MAP_34]       = hub->port_map34;
@@ -519,7 +523,8 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
 	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
 	hub->boost_up = USB251XB_DEF_BOOST_UP;
-	hub->boost_x = USB251XB_DEF_BOOST_X;
+	hub->boost_57 = USB251XB_DEF_BOOST_57;
+	hub->boost_14 = USB251XB_DEF_BOOST_14;
 	hub->port_swap = USB251XB_DEF_PORT_SWAP;
 	hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
 	hub->port_map34 = USB251XB_DEF_PORT_MAP_34;
-- 
cgit 


From dd99d106de255eb48ad7fce8a44afe3ee1526cef Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:08 +0300
Subject: usb: usb251xb: Add battery enable setting flag

Battery charging settings are supported by USB251xb hubs only.
USB2517i isn't one of them. So we need to reflect it within the
device-specific data structure. The driver doesn't support dts
property changing this setting, but instead defaults it with zero.
So the flag isn't used anywhere in the driver, but still can be helpful
in future, when necessity of the corresponding dts setting arises.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 530ef13b353d..5b1c4f565d2f 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -163,54 +163,63 @@ struct usb251xb {
 struct usb251xb_data {
 	u16 product_id;
 	u8 port_cnt;
+	bool bat_support;
 	char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
 };
 
 static const struct usb251xb_data usb2512b_data = {
 	.product_id = 0x2512,
 	.port_cnt = 2,
+	.bat_support = true,
 	.product_str = "USB2512B",
 };
 
 static const struct usb251xb_data usb2512bi_data = {
 	.product_id = 0x2512,
 	.port_cnt = 2,
+	.bat_support = true,
 	.product_str = "USB2512Bi",
 };
 
 static const struct usb251xb_data usb2513b_data = {
 	.product_id = 0x2513,
 	.port_cnt = 3,
+	.bat_support = true,
 	.product_str = "USB2513B",
 };
 
 static const struct usb251xb_data usb2513bi_data = {
 	.product_id = 0x2513,
 	.port_cnt = 3,
+	.bat_support = true,
 	.product_str = "USB2513Bi",
 };
 
 static const struct usb251xb_data usb2514b_data = {
 	.product_id = 0x2514,
 	.port_cnt = 4,
+	.bat_support = true,
 	.product_str = "USB2514B",
 };
 
 static const struct usb251xb_data usb2514bi_data = {
 	.product_id = 0x2514,
 	.port_cnt = 4,
+	.bat_support = true,
 	.product_str = "USB2514Bi",
 };
 
 static const struct usb251xb_data usb2517_data = {
 	.product_id = 0x2517,
 	.port_cnt = 7,
+	.bat_support = false,
 	.product_str = "USB2517",
 };
 
 static const struct usb251xb_data usb2517i_data = {
 	.product_id = 0x2517,
 	.port_cnt = 7,
+	.bat_support = false,
 	.product_str = "USB2517i",
 };
 
-- 
cgit 


From 2818e13ae174bf6a607db3e3fc405bbf5f66b1ce Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:09 +0300
Subject: usb: usb251xb: Add USB2517 LED settings

USB2517 supports two LED modes: USB mode and speed (default) indication
mode. The last one can be switched on by corresponding dts property.
Since USB251xb hubs doesn't support LEDs settings, we need to ignore
this setting.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 5b1c4f565d2f..5263b8acc772 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -163,6 +163,7 @@ struct usb251xb {
 struct usb251xb_data {
 	u16 product_id;
 	u8 port_cnt;
+	bool led_support;
 	bool bat_support;
 	char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */
 };
@@ -170,6 +171,7 @@ struct usb251xb_data {
 static const struct usb251xb_data usb2512b_data = {
 	.product_id = 0x2512,
 	.port_cnt = 2,
+	.led_support = false,
 	.bat_support = true,
 	.product_str = "USB2512B",
 };
@@ -177,6 +179,7 @@ static const struct usb251xb_data usb2512b_data = {
 static const struct usb251xb_data usb2512bi_data = {
 	.product_id = 0x2512,
 	.port_cnt = 2,
+	.led_support = false,
 	.bat_support = true,
 	.product_str = "USB2512Bi",
 };
@@ -184,6 +187,7 @@ static const struct usb251xb_data usb2512bi_data = {
 static const struct usb251xb_data usb2513b_data = {
 	.product_id = 0x2513,
 	.port_cnt = 3,
+	.led_support = false,
 	.bat_support = true,
 	.product_str = "USB2513B",
 };
@@ -191,6 +195,7 @@ static const struct usb251xb_data usb2513b_data = {
 static const struct usb251xb_data usb2513bi_data = {
 	.product_id = 0x2513,
 	.port_cnt = 3,
+	.led_support = false,
 	.bat_support = true,
 	.product_str = "USB2513Bi",
 };
@@ -198,6 +203,7 @@ static const struct usb251xb_data usb2513bi_data = {
 static const struct usb251xb_data usb2514b_data = {
 	.product_id = 0x2514,
 	.port_cnt = 4,
+	.led_support = false,
 	.bat_support = true,
 	.product_str = "USB2514B",
 };
@@ -205,6 +211,7 @@ static const struct usb251xb_data usb2514b_data = {
 static const struct usb251xb_data usb2514bi_data = {
 	.product_id = 0x2514,
 	.port_cnt = 4,
+	.led_support = false,
 	.bat_support = true,
 	.product_str = "USB2514Bi",
 };
@@ -212,6 +219,7 @@ static const struct usb251xb_data usb2514bi_data = {
 static const struct usb251xb_data usb2517_data = {
 	.product_id = 0x2517,
 	.port_cnt = 7,
+	.led_support = true,
 	.bat_support = false,
 	.product_str = "USB2517",
 };
@@ -219,6 +227,7 @@ static const struct usb251xb_data usb2517_data = {
 static const struct usb251xb_data usb2517i_data = {
 	.product_id = 0x2517,
 	.port_cnt = 7,
+	.led_support = true,
 	.bat_support = false,
 	.product_str = "USB2517i",
 };
@@ -442,6 +451,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	if (of_get_property(np, "port-mapping-mode", NULL))
 		hub->conf_data3 |= BIT(3);
 
+	if (data->led_support && of_get_property(np, "led-usb-mode", NULL))
+		hub->conf_data3 &= ~BIT(1);
+
 	if (of_get_property(np, "string-support", NULL))
 		hub->conf_data3 |= BIT(0);
 
-- 
cgit 


From 287c2bb6e1b5b1299da59537fe58515001286c85 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:10 +0300
Subject: usb: usb251xb: Fix property_u32 NULL pointer dereference

The methods like of_property_read_u32 utilizing the specified
pointer permit only the pointer to a preallocated u32 storage as the
third argument. As a result the driver crashes on NULL pointer
dereference in case if "oc-delay-us" or "power-on-time-ms" declared
in dts file.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 5263b8acc772..333f61baf145 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -347,7 +347,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	struct device *dev = hub->dev;
 	struct device_node *np = dev->of_node;
 	int len, err, i;
-	u32 *property_u32 = NULL;
+	u32 property_u32 = 0;
 	const u32 *cproperty_u32;
 	const char *cproperty_char;
 	char str[USB251XB_STRING_BUFSIZE / 2];
@@ -424,16 +424,16 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	if (of_get_property(np, "dynamic-power-switching", NULL))
 		hub->conf_data2 |= BIT(7);
 
-	if (!of_property_read_u32(np, "oc-delay-us", property_u32)) {
-		if (*property_u32 == 100) {
+	if (!of_property_read_u32(np, "oc-delay-us", &property_u32)) {
+		if (property_u32 == 100) {
 			/* 100 us*/
 			hub->conf_data2 &= ~BIT(5);
 			hub->conf_data2 &= ~BIT(4);
-		} else if (*property_u32 == 4000) {
+		} else if (property_u32 == 4000) {
 			/* 4 ms */
 			hub->conf_data2 &= ~BIT(5);
 			hub->conf_data2 |= BIT(4);
-		} else if (*property_u32 == 16000) {
+		} else if (property_u32 == 16000) {
 			/* 16 ms */
 			hub->conf_data2 |= BIT(5);
 			hub->conf_data2 |= BIT(4);
@@ -500,8 +500,8 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	}
 
 	hub->power_on_time = USB251XB_DEF_POWER_ON_TIME;
-	if (!of_property_read_u32(np, "power-on-time-ms", property_u32))
-		hub->power_on_time = min_t(u8, *property_u32 / 2, 255);
+	if (!of_property_read_u32(np, "power-on-time-ms", &property_u32))
+		hub->power_on_time = min_t(u8, property_u32 / 2, 255);
 
 	if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1))
 		hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
-- 
cgit 


From 4ed466ae69692c851fcd4ea7f02b696df7804712 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:11 +0300
Subject: usb: usb251xb: Add max power/current dts property support

This parameters may be varied in accordance with hardware specifics.
So lets add the corresponding settings to the usb251xb driver dts
specification.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 24 ++++++++++++++++++++----
 1 file changed, 20 insertions(+), 4 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 333f61baf145..11ec78e45282 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -499,6 +499,26 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 		}
 	}
 
+	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
+	if (!of_property_read_u32(np, "sp-max-total-current-microamp",
+	    &property_u32))
+		hub->max_power_sp = min_t(u8, property_u32 / 2000, 50);
+
+	hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
+	if (!of_property_read_u32(np, "bp-max-total-current-microamp",
+	    &property_u32))
+		hub->max_power_bp = min_t(u8, property_u32 / 2000, 255);
+
+	hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
+	if (!of_property_read_u32(np, "sp-max-removable-current-microamp",
+	    &property_u32))
+		hub->max_current_sp = min_t(u8, property_u32 / 2000, 50);
+
+	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
+	if (!of_property_read_u32(np, "bp-max-removable-current-microamp",
+	    &property_u32))
+		hub->max_current_bp = min_t(u8, property_u32 / 2000, 255);
+
 	hub->power_on_time = USB251XB_DEF_POWER_ON_TIME;
 	if (!of_property_read_u32(np, "power-on-time-ms", &property_u32))
 		hub->power_on_time = min_t(u8, property_u32 / 2, 255);
@@ -538,10 +558,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	/* The following parameters are currently not exposed to devicetree, but
 	 * may be as soon as needed.
 	 */
-	hub->max_power_sp = USB251XB_DEF_MAX_POWER_SELF;
-	hub->max_power_bp = USB251XB_DEF_MAX_POWER_BUS;
-	hub->max_current_sp = USB251XB_DEF_MAX_CURRENT_SELF;
-	hub->max_current_bp = USB251XB_DEF_MAX_CURRENT_BUS;
 	hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE;
 	hub->boost_up = USB251XB_DEF_BOOST_UP;
 	hub->boost_57 = USB251XB_DEF_BOOST_57;
-- 
cgit 


From 69a0c69aab9622186e7b93f1b900a8e17effbcd9 Mon Sep 17 00:00:00 2001
From: Serge Semin <fancer.lancer@gmail.com>
Date: Sun, 22 Oct 2017 23:38:12 +0300
Subject: usb: usb251xb: Use GPIO descriptor consumer interface

The driver used to be developed with legacy GPIO API support. It's
better to use descriptor-based interface for several reasons. First
of all the legacy API doesn't support the ACTIVE_LOW/HIGH flag of dts
nodes, which is essential since different hardware may have different
GPIOs connectivity including the logical value inversion. Secondly,
by requesting the reset GPIO descriptor the driver prevent the other
applications from changing its value. And last but not least the
legacy GPIO interface should be avoided in the new code due to it
obsolescence.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usb251xb.c | 33 +++++++++++++--------------------
 1 file changed, 13 insertions(+), 20 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 11ec78e45282..9c8f7e2b6740 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -20,12 +20,11 @@
  */
 
 #include <linux/delay.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/nls.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 
 /* Internal Register Set Addresses & Default Values acc. to DS00001692C */
@@ -126,7 +125,7 @@ struct usb251xb {
 	struct device *dev;
 	struct i2c_client *i2c;
 	u8 skip_config;
-	int gpio_reset;
+	struct gpio_desc *gpio_reset;
 	u16 vendor_id;
 	u16 product_id;
 	u16 device_id;
@@ -234,13 +233,13 @@ static const struct usb251xb_data usb2517i_data = {
 
 static void usb251xb_reset(struct usb251xb *hub, int state)
 {
-	if (!gpio_is_valid(hub->gpio_reset))
+	if (!hub->gpio_reset)
 		return;
 
-	gpio_set_value_cansleep(hub->gpio_reset, state);
+	gpiod_set_value_cansleep(hub->gpio_reset, state);
 
 	/* wait for hub recovery/stabilization */
-	if (state)
+	if (!state)
 		usleep_range(500, 750);	/* >=500us at power on */
 	else
 		usleep_range(1, 10);	/* >=1us at power down */
@@ -259,7 +258,7 @@ static int usb251xb_connect(struct usb251xb *hub)
 		i2c_wb[0] = 0x01;
 		i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH;
 
-		usb251xb_reset(hub, 1);
+		usb251xb_reset(hub, 0);
 
 		err = i2c_smbus_write_i2c_block_data(hub->i2c,
 				USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb);
@@ -309,7 +308,7 @@ static int usb251xb_connect(struct usb251xb *hub)
 	i2c_wb[USB251XB_ADDR_PORT_MAP_7]        = hub->port_map7;
 	i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH;
 
-	usb251xb_reset(hub, 1);
+	usb251xb_reset(hub, 0);
 
 	/* write registers */
 	for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) {
@@ -362,19 +361,13 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
 	else
 		hub->skip_config = 0;
 
-	hub->gpio_reset = of_get_named_gpio(np, "reset-gpios", 0);
-	if (hub->gpio_reset == -EPROBE_DEFER)
+	hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (PTR_ERR(hub->gpio_reset) == -EPROBE_DEFER) {
 		return -EPROBE_DEFER;
-	if (gpio_is_valid(hub->gpio_reset)) {
-		err = devm_gpio_request_one(dev, hub->gpio_reset,
-					    GPIOF_OUT_INIT_LOW,
-					    "usb251xb reset");
-		if (err) {
-			dev_err(dev,
-				"unable to request GPIO %d as reset pin (%d)\n",
-				hub->gpio_reset, err);
-			return err;
-		}
+	} else if (IS_ERR(hub->gpio_reset)) {
+		err = PTR_ERR(hub->gpio_reset);
+		dev_err(dev, "unable to request GPIO reset pin (%d)\n", err);
+		return err;
 	}
 
 	if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1))
-- 
cgit 


From 5fd54ace4721fc5ce2bb5aef6318fcf17f421460 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri, 3 Nov 2017 11:28:30 +0100
Subject: USB: add SPDX identifiers to all remaining files in drivers/usb/

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

Update the drivers/usb/ and include/linux/usb* files with the correct
SPDX license identifier based on the license text in the file itself.
The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

This work is based on a script and data from Thomas Gleixner, Philippe
Ombredanne, and Kate Stewart.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/adutux.c                  | 1 +
 drivers/usb/misc/appledisplay.c            | 1 +
 drivers/usb/misc/chaoskey.c                | 1 +
 drivers/usb/misc/cypress_cy7c63.c          | 1 +
 drivers/usb/misc/cytherm.c                 | 1 +
 drivers/usb/misc/ehset.c                   | 1 +
 drivers/usb/misc/emi26.c                   | 1 +
 drivers/usb/misc/emi62.c                   | 1 +
 drivers/usb/misc/ezusb.c                   | 1 +
 drivers/usb/misc/ftdi-elan.c               | 1 +
 drivers/usb/misc/idmouse.c                 | 1 +
 drivers/usb/misc/iowarrior.c               | 1 +
 drivers/usb/misc/isight_firmware.c         | 1 +
 drivers/usb/misc/ldusb.c                   | 1 +
 drivers/usb/misc/legousbtower.c            | 1 +
 drivers/usb/misc/lvstest.c                 | 1 +
 drivers/usb/misc/rio500.c                  | 1 +
 drivers/usb/misc/rio500_usb.h              | 1 +
 drivers/usb/misc/sisusbvga/sisusb.c        | 1 +
 drivers/usb/misc/sisusbvga/sisusb.h        | 1 +
 drivers/usb/misc/sisusbvga/sisusb_con.c    | 1 +
 drivers/usb/misc/sisusbvga/sisusb_init.c   | 1 +
 drivers/usb/misc/sisusbvga/sisusb_init.h   | 1 +
 drivers/usb/misc/sisusbvga/sisusb_struct.h | 1 +
 drivers/usb/misc/trancevibrator.c          | 1 +
 drivers/usb/misc/usb251xb.c                | 1 +
 drivers/usb/misc/usb3503.c                 | 1 +
 drivers/usb/misc/usb4604.c                 | 1 +
 drivers/usb/misc/usb_u132.h                | 1 +
 drivers/usb/misc/usblcd.c                  | 1 +
 drivers/usb/misc/usbsevseg.c               | 1 +
 drivers/usb/misc/usbtest.c                 | 1 +
 drivers/usb/misc/uss720.c                  | 1 +
 drivers/usb/misc/yurex.c                   | 1 +
 34 files changed, 34 insertions(+)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 1c0ada75c35d..092db5ae5fa1 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * adutux - driver for ADU devices from Ontrak Control Systems
  * This is an experimental driver. Use at your own risk.
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 8efdc500e790..b75defc52c24 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Apple Cinema Display driver
  *
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
index abec6e604a62..8a22b4997c5f 100644
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * chaoskey - driver for ChaosKey device from Altus Metrum.
  *
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 5c93a888c40e..819ad8dc2376 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
 * cypress_cy7c63.c
 *
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index 63207c42acf6..a65f8817ecf8 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* -*- linux-c -*-
  * Cypress USB Thermometer driver 
  * 
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
index c31b4a33e6bb..8b8e25424aa1 100644
--- a/drivers/usb/misc/ehset.c
+++ b/drivers/usb/misc/ehset.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
  *
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 8950fa5e973d..81836e9d787f 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* 
  * Emagic EMI 2|6 usb audio interface firmware loader.
  * Copyright (C) 2002
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 1d9be4431b72..fad894a63c52 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /* 
  * Emagic EMI 2|6 usb audio interface firmware loader.
  * Copyright (C) 2002
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index 837208f14f86..c9be0d484e5c 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * EZ-USB specific functions used by some of the USB to Serial drivers.
  *
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index 424ff12f3b51..c1fbc2a32eb2 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB FTDI client driver for Elan Digital Systems's Uxxx adapters
  *
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 39d8fedfaf3b..8d144903f05e 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* Siemens ID Mouse driver v0.6
 
   This program is free software; you can redistribute it and/or
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index be5881303681..ad3109490c0f 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  *  Native support for the I/O-Warrior USB devices
  *
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index 1c61830e96f9..91c028f16d31 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for loading USB isight firmware
  *
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 680bddb3ce05..0f01dd3b59d0 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /**
  * Generic USB driver for report based interrupt in/out devices
  * like LD Didactic's USB devices. LD Didactic's USB devices are
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 5628f678ab59..cd4d49d8aea5 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * LEGO USB Tower driver
  *
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index ddddd6387f66..5e5d128e16c0 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * drivers/usb/misc/lvstest.c
  *
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index ddfebb144aaa..84bd682e9e61 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /* -*- linux-c -*- */
 
 /* 
diff --git a/drivers/usb/misc/rio500_usb.h b/drivers/usb/misc/rio500_usb.h
index 359abc98e706..ce2ac1099d86 100644
--- a/drivers/usb/misc/rio500_usb.h
+++ b/drivers/usb/misc/rio500_usb.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*  ----------------------------------------------------------------------
 
     Copyright (C) 2000  Cesar Miquel  (miquel@df.uba.ar)
diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c
index 30774e0aeadd..3e65bdc2615c 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.c
+++ b/drivers/usb/misc/sisusbvga/sisusb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb.h b/drivers/usb/misc/sisusbvga/sisusb.h
index 55492a5930bd..20f03ad0ea16 100644
--- a/drivers/usb/misc/sisusbvga/sisusb.h
+++ b/drivers/usb/misc/sisusbvga/sisusb.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for Net2280/SiS315 based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index f019d80ca9e4..73f7bde78e11 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index bf0032ca35ed..6a30e8bd9221 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
 /*
  * sisusb - usb kernel driver for SiS315(E) based USB2VGA dongles
  *
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.h b/drivers/usb/misc/sisusbvga/sisusb_init.h
index e79a616f0d26..1782c759c4ad 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /* $XFree86$ */
 /* $XdotOrg$ */
 /*
diff --git a/drivers/usb/misc/sisusbvga/sisusb_struct.h b/drivers/usb/misc/sisusbvga/sisusb_struct.h
index 1c4240e802c1..706d77090e00 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_struct.h
+++ b/drivers/usb/misc/sisusbvga/sisusb_struct.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
  * General structure definitions for universal mode switching modules
  *
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index 1862ed15ce28..405726b8ebe6 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * PlayStation 2 Trance Vibrator driver
  *
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 9c8f7e2b6740..5234bc3e0f01 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for Microchip USB251xB USB 2.0 Hi-Speed Hub Controller
  * Configuration via SMBus.
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index 8e7737d7ac0a..b5416f887fbf 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for SMSC USB3503 USB 2.0 hub controller driver
  *
diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c
index e9f37fb746ac..40fa85807aae 100644
--- a/drivers/usb/misc/usb4604.c
+++ b/drivers/usb/misc/usb4604.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Driver for SMSC USB4604 USB HSIC 4-port 2.0 hub controller driver
  * Based on usb3503 driver
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
index dc2e5a31caec..4dbfea3237f7 100644
--- a/drivers/usb/misc/usb_u132.h
+++ b/drivers/usb/misc/usb_u132.h
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
 * Common Header File for the Elan Digital Systems U132 adapter
 * this file should be included by both the "ftdi-u132" and
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index 0f5ad896c7e3..9ba4a4e68d91 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*****************************************************************************
  *                          USBLCD Kernel Driver                             *
  *                            Version 1.05                                   *
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 3f6a28045b53..4990d5757019 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * USB 7 Segment Driver
  *
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 3639e00a51a0..aeda01f037c1 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/init.h>
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 8a13b2fcf3e1..876a7a32defc 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*****************************************************************************/
 
 /*
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 58abdf28620a..1aec1d25ee44 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Driver for Meywa-Denki & KAYAC YUREX
  *
-- 
cgit 


From 5d62afbe9572138a25d67b8468d27ec65777824d Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Fri, 3 Nov 2017 12:40:58 +0100
Subject: USB: misc: Remove redundant license text

Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner.  So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Cc: Keith Packard <keithp@keithp.com>
Cc: Juergen Stuber <starblue@users.sourceforge.net>
Cc: Cesar Miquel <miquel@df.uba.ar>
Cc: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/adutux.c          |  5 -----
 drivers/usb/misc/appledisplay.c    | 14 --------------
 drivers/usb/misc/chaoskey.c        |  9 ---------
 drivers/usb/misc/cypress_cy7c63.c  |  4 ----
 drivers/usb/misc/cytherm.c         |  5 -----
 drivers/usb/misc/ehset.c           |  9 ---------
 drivers/usb/misc/emi26.c           |  4 ----
 drivers/usb/misc/emi62.c           |  4 ----
 drivers/usb/misc/ezusb.c           |  4 ----
 drivers/usb/misc/ftdi-elan.c       |  5 -----
 drivers/usb/misc/idmouse.c         |  5 -----
 drivers/usb/misc/isight_firmware.c |  4 ----
 drivers/usb/misc/ldusb.c           |  5 -----
 drivers/usb/misc/legousbtower.c    |  5 -----
 drivers/usb/misc/lvstest.c         |  4 ----
 drivers/usb/misc/rio500.c          | 14 --------------
 drivers/usb/misc/rio500_usb.h      | 18 ------------------
 drivers/usb/misc/trancevibrator.c  | 14 --------------
 drivers/usb/misc/usb251xb.c        | 10 ----------
 drivers/usb/misc/usb3503.c         | 14 --------------
 drivers/usb/misc/usb4604.c         | 10 ----------
 drivers/usb/misc/usb_u132.h        |  5 -----
 drivers/usb/misc/usbsevseg.c       |  5 -----
 drivers/usb/misc/uss720.c          | 14 --------------
 drivers/usb/misc/yurex.c           |  5 -----
 25 files changed, 195 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index 092db5ae5fa1..e9195a7103a8 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -6,11 +6,6 @@
  *
  * Copyright (c) 2003 John Homppi (SCO, leave this notice here)
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
  * derived from the Lego USB Tower driver 0.56:
  * Copyright (c) 2003 David Glance <davidgsf@sourceforge.net>
  *               2001 Juergen Stuber <stuber@loria.fr>
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index b75defc52c24..b3eb8b989bd4 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -5,20 +5,6 @@
  * Copyright (C) 2006  Michael Hanselmann (linux-kernel@hansmi.ch)
  *
  * Thanks to Caskey L. Dickson for his work with acdctl.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c
index 8a22b4997c5f..b6a1b9331aa0 100644
--- a/drivers/usb/misc/chaoskey.c
+++ b/drivers/usb/misc/chaoskey.c
@@ -12,15 +12,6 @@
  * bit stream.
  *
  * Copyright © 2015 Keith Packard <keithp@keithp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the GNU
- * General Public License for more details.
  */
 
 #include <linux/module.h>
diff --git a/drivers/usb/misc/cypress_cy7c63.c b/drivers/usb/misc/cypress_cy7c63.c
index 819ad8dc2376..bf4d2778907e 100644
--- a/drivers/usb/misc/cypress_cy7c63.c
+++ b/drivers/usb/misc/cypress_cy7c63.c
@@ -24,10 +24,6 @@
 *
 *	For up-to-date information please visit:
 *	http://www.obock.de/kernel/cypress
-*
-*	This program is free software; you can redistribute it and/or
-*	modify it under the terms of the GNU General Public License as
-*	published by the Free Software Foundation, version 2.
 */
 
 #include <linux/module.h>
diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c
index a65f8817ecf8..66be86077292 100644
--- a/drivers/usb/misc/cytherm.c
+++ b/drivers/usb/misc/cytherm.c
@@ -7,11 +7,6 @@
  * This driver works with Elektor magazine USB Interface as published in 
  * issue #291. It should also work with the original starter kit/demo board
  * from Cypress.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
  */
 
 
diff --git a/drivers/usb/misc/ehset.c b/drivers/usb/misc/ehset.c
index 8b8e25424aa1..7895d61e733b 100644
--- a/drivers/usb/misc/ehset.c
+++ b/drivers/usb/misc/ehset.c
@@ -1,15 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2010-2013, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 81836e9d787f..24d841850e05 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -4,10 +4,6 @@
  * Copyright (C) 2002
  * 	Tapio Laxström (tapio.laxstrom@iptime.fi)
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, as published by
- * the Free Software Foundation, version 2.
- * 
  * emi26.c,v 1.13 2002/03/08 13:10:26 tapio Exp
  */
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index fad894a63c52..3eea60437f56 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -3,10 +3,6 @@
  * Emagic EMI 2|6 usb audio interface firmware loader.
  * Copyright (C) 2002
  * 	Tapio Laxström (tapio.laxstrom@iptime.fi)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, as published by
- * the Free Software Foundation, version 2.
  */
 #include <linux/kernel.h>
 #include <linux/errno.h>
diff --git a/drivers/usb/misc/ezusb.c b/drivers/usb/misc/ezusb.c
index c9be0d484e5c..f058d8029761 100644
--- a/drivers/usb/misc/ezusb.c
+++ b/drivers/usb/misc/ezusb.c
@@ -3,10 +3,6 @@
  * EZ-USB specific functions used by some of the USB to Serial drivers.
  *
  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License version
- *	2 as published by the Free Software Foundation.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index c1fbc2a32eb2..76c718ac8c78 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -8,11 +8,6 @@
  * Author and Maintainer - Tony Olech - Elan Digital Systems
  * tony.olech@elandigitalsystems.com
  *
- * This program is free software;you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation, version 2.
- *
- *
  * This driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
  * based on various USB client drivers in the 2.6.15 linux kernel
  * with constant reference to the 3rd Edition of Linux Device Drivers
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 8d144903f05e..20b0f91a5d9b 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -1,11 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0+
 /* Siemens ID Mouse driver v0.6
 
-  This program is free software; you can redistribute it and/or
-  modify it under the terms of the GNU General Public License as
-  published by the Free Software Foundation; either version 2 of
-  the License, or (at your option) any later version.
-
   Copyright (C) 2004-5 by Florian 'Floe' Echtler  <echtler@fs.tum.de>
                       and Andreas  'ad'  Deresch <aderesch@fs.tum.de>
 
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
index 91c028f16d31..4d30095d6ad2 100644
--- a/drivers/usb/misc/isight_firmware.c
+++ b/drivers/usb/misc/isight_firmware.c
@@ -4,10 +4,6 @@
  *
  * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- *
  * The USB isight cameras in recent Apples are roughly compatible with the USB
  * video class specification, and can be driven by uvcvideo. However, they
  * need firmware to be loaded beforehand. After firmware loading, the device
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 0f01dd3b59d0..5c1a3b852453 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -13,11 +13,6 @@
  *
  * Copyright (C) 2005 Michael Hund <mhund@ld-didactic.de>
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- *
  * Derived from Lego USB Tower driver
  * Copyright (C) 2003 David Glance <advidgsf@sourceforge.net>
  *		 2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index cd4d49d8aea5..c5be6e9e24a5 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -5,11 +5,6 @@
  * Copyright (C) 2003 David Glance <davidgsf@sourceforge.net>
  *               2001-2004 Juergen Stuber <starblue@users.sourceforge.net>
  *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation; either version 2 of
- *	the License, or (at your option) any later version.
- *
  * derived from USB Skeleton driver - 0.5
  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
  *
diff --git a/drivers/usb/misc/lvstest.c b/drivers/usb/misc/lvstest.c
index 5e5d128e16c0..e5c03c6d16e9 100644
--- a/drivers/usb/misc/lvstest.c
+++ b/drivers/usb/misc/lvstest.c
@@ -6,10 +6,6 @@
  *
  * Copyright (C) 2014 ST Microelectronics
  * Pratyush Anand <pratyush.anand@gmail.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/init.h>
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index 84bd682e9e61..7b9adeb3e7aa 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -7,20 +7,6 @@
  * Cesar Miquel (miquel@df.uba.ar)
  * 
  * based on hp_scanner.c by David E. Nelson (dnelson@jump.net)
- * 
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  *
  * Based upon mouse.c (Brad Keryan) and printer.c (Michael Gee).
  *
diff --git a/drivers/usb/misc/rio500_usb.h b/drivers/usb/misc/rio500_usb.h
index ce2ac1099d86..6db7a5863496 100644
--- a/drivers/usb/misc/rio500_usb.h
+++ b/drivers/usb/misc/rio500_usb.h
@@ -1,26 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*  ----------------------------------------------------------------------
-
     Copyright (C) 2000  Cesar Miquel  (miquel@df.uba.ar)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
     ---------------------------------------------------------------------- */
 
-
-
 #define RIO_SEND_COMMAND			0x1
 #define RIO_RECV_COMMAND			0x2
 
diff --git a/drivers/usb/misc/trancevibrator.c b/drivers/usb/misc/trancevibrator.c
index 405726b8ebe6..d83af2a332e4 100644
--- a/drivers/usb/misc/trancevibrator.c
+++ b/drivers/usb/misc/trancevibrator.c
@@ -3,20 +3,6 @@
  * PlayStation 2 Trance Vibrator driver
  *
  * Copyright (C) 2006 Sam Hocevar <sam@zoy.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
 /* Standard include files */
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 5234bc3e0f01..a6efb9a72939 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -8,16 +8,6 @@
  * This work is based on the USB3503 driver by Dongjin Kim and
  * a not-accepted patch by Fabien Lahoudere, see:
  * https://patchwork.kernel.org/patch/9257715/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/delay.h>
diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c
index b5416f887fbf..465dbf68b463 100644
--- a/drivers/usb/misc/usb3503.c
+++ b/drivers/usb/misc/usb3503.c
@@ -3,20 +3,6 @@
  * Driver for SMSC USB3503 USB 2.0 hub controller driver
  *
  * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
 #include <linux/clk.h>
diff --git a/drivers/usb/misc/usb4604.c b/drivers/usb/misc/usb4604.c
index 40fa85807aae..1b4de651e697 100644
--- a/drivers/usb/misc/usb4604.c
+++ b/drivers/usb/misc/usb4604.c
@@ -5,16 +5,6 @@
  *
  * Copyright (c) 2012-2013 Dongjin Kim (tobetter@gmail.com)
  * Copyright (c) 2016 Linaro Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <linux/i2c.h>
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
index 4dbfea3237f7..4bf77736914f 100644
--- a/drivers/usb/misc/usb_u132.h
+++ b/drivers/usb/misc/usb_u132.h
@@ -10,11 +10,6 @@
 * Author and Maintainer - Tony Olech - Elan Digital Systems
 *(tony.olech@elandigitalsystems.com)
 *
-* This program is free software;you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation, version 2.
-*
-*
 * The driver was written by Tony Olech(tony.olech@elandigitalsystems.com)
 * based on various USB client drivers in the 2.6.15 linux kernel
 * with constant reference to the 3rd Edition of Linux Device Drivers
diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c
index 4990d5757019..12f7e94695a2 100644
--- a/drivers/usb/misc/usbsevseg.c
+++ b/drivers/usb/misc/usbsevseg.c
@@ -4,11 +4,6 @@
  *
  * Copyright (C) 2008 Harrison Metzger <harrisonmetz@gmail.com>
  * Based on usbled.c by Greg Kroah-Hartman (greg@kroah.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 876a7a32defc..263c97fec708 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -7,20 +7,6 @@
  *	Copyright (C) 1999, 2005, 2010
  *	    Thomas Sailer (t.sailer@alumni.ethz.ch)
  *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- *
- *	You should have received a copy of the GNU General Public License
- *	along with this program; if not, write to the Free Software
- *	Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
  *  Based on parport_pc.c
  *
  *  History:
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 1aec1d25ee44..8abb6cbbd98a 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -3,11 +3,6 @@
  * Driver for Meywa-Denki & KAYAC YUREX
  *
  * Copyright (C) 2010 Tomoki Sekiyama (tomoki.sekiyama@gmail.com)
- *
- *	This program is free software; you can redistribute it and/or
- *	modify it under the terms of the GNU General Public License as
- *	published by the Free Software Foundation, version 2.
- *
  */
 
 #include <linux/kernel.h>
-- 
cgit 


From d9e1e1484ade396b3a979ba6c68798dbaceed1b9 Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@linux.intel.com>
Date: Thu, 2 Nov 2017 10:57:40 +0200
Subject: usb: core: introduce a new usb_get_std_status() helper

This new helper is a simple wrapper around usb_get_status(). This
patch is in preparation to adding support for fetching PTM_STATUS
types. No functional changes.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/usbtest.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index aeda01f037c1..203f29894bce 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -1016,7 +1016,7 @@ static int ch9_postconfig(struct usbtest_dev *dev)
 	/* FIXME fetch strings from at least the device descriptor */
 
 	/* [9.4.5] get_status always works */
-	retval = usb_get_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
+	retval = usb_get_std_status(udev, USB_RECIP_DEVICE, 0, dev->buf);
 	if (retval) {
 		dev_err(&iface->dev, "get dev status --> %d\n", retval);
 		return retval;
@@ -1026,7 +1026,7 @@ static int ch9_postconfig(struct usbtest_dev *dev)
 	 * the device's remote wakeup feature ... if we can, test that here
 	 */
 
-	retval = usb_get_status(udev, USB_RECIP_INTERFACE,
+	retval = usb_get_std_status(udev, USB_RECIP_INTERFACE,
 			iface->altsetting[0].desc.bInterfaceNumber, dev->buf);
 	if (retval) {
 		dev_err(&iface->dev, "get interface status --> %d\n", retval);
@@ -1615,7 +1615,7 @@ static int verify_not_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
 	u16	status;
 
 	/* shouldn't look or act halted */
-	retval = usb_get_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
+	retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
 	if (retval < 0) {
 		ERROR(tdev, "ep %02x couldn't get no-halt status, %d\n",
 				ep, retval);
@@ -1637,7 +1637,7 @@ static int verify_halted(struct usbtest_dev *tdev, int ep, struct urb *urb)
 	u16	status;
 
 	/* should look and act halted */
-	retval = usb_get_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
+	retval = usb_get_std_status(urb->dev, USB_RECIP_ENDPOINT, ep, &status);
 	if (retval < 0) {
 		ERROR(tdev, "ep %02x couldn't get halt status, %d\n",
 				ep, retval);
-- 
cgit 


From 8444efc4a052332d643ed5c8aebcca148c7de032 Mon Sep 17 00:00:00 2001
From: Colin Ian King <colin.king@canonical.com>
Date: Tue, 7 Nov 2017 11:45:27 +0000
Subject: USB: adutux: remove redundant variable minor

Variable minor is being assigned but never read, hence it is redundant
and can be removed. Cleans up clang warning:

drivers/usb/misc/adutux.c:770:2: warning: Value stored to 'minor' is
never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/adutux.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c
index e9195a7103a8..4b8712733fc7 100644
--- a/drivers/usb/misc/adutux.c
+++ b/drivers/usb/misc/adutux.c
@@ -757,13 +757,11 @@ error:
 static void adu_disconnect(struct usb_interface *interface)
 {
 	struct adu_device *dev;
-	int minor;
 
 	dev = usb_get_intfdata(interface);
 
 	mutex_lock(&dev->mtx);	/* not interruptible */
 	dev->udev = NULL;	/* poison */
-	minor = dev->minor;
 	usb_deregister_dev(interface, &adu_class);
 	mutex_unlock(&dev->mtx);
 
-- 
cgit 


From 3efe891f61479a98edc5c3c7b91b92b69d99e592 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: Mon, 6 Nov 2017 16:34:07 +0100
Subject: USB: add SPDX identifiers to all remaining Makefiles

It's good to have SPDX identifiers in all files to make it easier to
audit the kernel tree for correct licenses.

This updates the remaining drivers/usb/*Makefile* that were missing SPDX
identifiers.  They all get the following identifier:
	SPDX-License-Identifier: GPL-2.0

The SPDX identifier is a legally binding shorthand, which can be used
instead of the full boiler plate text.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Cc: Johan Hovold <johan@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/misc/sisusbvga/Makefile | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb/misc')

diff --git a/drivers/usb/misc/sisusbvga/Makefile b/drivers/usb/misc/sisusbvga/Makefile
index 3142476ccc8e..6ed3a638261a 100644
--- a/drivers/usb/misc/sisusbvga/Makefile
+++ b/drivers/usb/misc/sisusbvga/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Makefile for the sisusb driver (if driver is inside kernel tree).
 #
-- 
cgit