From 1c014420583564ac09e3b67006f2e7050861e66b Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Thu, 17 Apr 2008 19:41:02 +0200 Subject: mac80211: Replace ieee80211_tx_control->key_idx with ieee80211_key_conf The hw_key_idx inside the ieee80211_key_conf structure does not provide all the information drivers might need to perform hardware encryption. This is in particular true for rt2x00 who needs to know the key algorithm and whether it is a shared or pairwise key. By passing the ieee80211_key_conf pointer it assures us that drivers can make full use of all information that it should know about a particular key. Additionally this patch updates all drivers to grab the hw_key_idx from the ieee80211_key_conf structure. v2: Removed bogus u16 cast v3: Add warning about ieee80211_tx_control pointers v4: Update warning about ieee80211_tx_control pointers Signed-off-by: Ivo van Doorn Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4a80d74975e8..27ef9f761ac5 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -286,8 +286,17 @@ enum mac80211_tx_control_flags { /* Transmit control fields. This data structure is passed to low-level driver * with each TX frame. The low-level driver is responsible for configuring - * the hardware to use given values (depending on what is supported). */ - + * the hardware to use given values (depending on what is supported). + * + * NOTE: Be careful with using the pointers outside of the ieee80211_ops->tx() + * context (i.e. when defering the work to a workqueue). + * The vif pointer is valid until the it has been removed with the + * ieee80211_ops->remove_interface() callback funtion. + * The hw_key pointer is valid until it has been removed with the + * ieee80211_ops->set_key() callback function. + * The tx_rate and alt_retry_rate pointers are valid until the phy is + * deregistered. + */ struct ieee80211_tx_control { struct ieee80211_vif *vif; struct ieee80211_rate *tx_rate; @@ -298,9 +307,11 @@ struct ieee80211_tx_control { /* retry rate for the last retries */ struct ieee80211_rate *alt_retry_rate; + /* Key used for hardware encryption + * NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ + struct ieee80211_key_conf *hw_key; + u32 flags; /* tx control flags defined above */ - u8 key_idx; /* keyidx from hw->set_key(), undefined if - * IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. * This could be used when set_retry_limit * is not implemented by the driver */ -- cgit From c6adbd2158fee972adcc6232de5e2ef375f1f782 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Thu, 17 Apr 2008 21:11:18 +0200 Subject: mac80211: Add IEEE80211_KEY_FLAG_PAIRWISE This adds a new flag to the ieee80211_key_conf structure. This flag will inform the driver the key is pairwise rather then a shared key. This is important for drivers who support both types of keys, and need to be informed which type of key this is. Alternative would be drivers checking the address argument of set_key(), but it will be safer when mac80211 is more explicit. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- include/net/mac80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 27ef9f761ac5..740c11ca066c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -621,11 +621,14 @@ enum ieee80211_key_alg { * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by * the driver for a TKIP key if it requires Michael MIC * generation in software. + * @IEEE80211_KEY_FLAG_PAIRWISE: Set by mac80211, this flag indicates + * that the key is pairwise rather then a shared key. */ enum ieee80211_key_flags { IEEE80211_KEY_FLAG_WMM_STA = 1<<0, IEEE80211_KEY_FLAG_GENERATE_IV = 1<<1, IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2, + IEEE80211_KEY_FLAG_PAIRWISE = 1<<3, }; /** -- cgit From 57ffc589a92424f9def74fe0d49b2f7763ff07fd Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Apr 2008 17:18:59 +0200 Subject: mac80211: clean up get_tx_stats callback The callback takes a ieee80211_tx_queue_stats with a contained array of ieee80211_tx_queue_stats_data, remove the former, rename the latter to ieee80211_tx_queue_stats and make tx_stats() take the array directly. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 740c11ca066c..346a7563ef02 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -117,13 +117,13 @@ struct ieee80211_tx_queue_params { }; /** - * struct ieee80211_tx_queue_stats_data - transmit queue statistics + * struct ieee80211_tx_queue_stats - transmit queue statistics * * @len: number of packets in queue * @limit: queue length limit * @count: number of frames sent */ -struct ieee80211_tx_queue_stats_data { +struct ieee80211_tx_queue_stats { unsigned int len; unsigned int limit; unsigned int count; @@ -165,10 +165,6 @@ enum ieee80211_tx_queue { NUM_TX_DATA_QUEUES_AMPDU = 16 }; -struct ieee80211_tx_queue_stats { - struct ieee80211_tx_queue_stats_data data[NUM_TX_DATA_QUEUES_AMPDU]; -}; - struct ieee80211_low_level_stats { unsigned int dot11ACKFailureCount; unsigned int dot11RTSFailureCount; @@ -1083,9 +1079,8 @@ enum ieee80211_ampdu_mlme_action { * @get_tx_stats: Get statistics of the current TX queue status. This is used * to get number of currently queued packets (queue length), maximum queue * size (limit), and total number of packets sent using each TX queue - * (count). This information is used for WMM to find out which TX - * queues have room for more packets and by hostapd to provide - * statistics about the current queueing state to external programs. + * (count). The 'stats' pointer points to an array that has hw->queues + + * hw->ampdu_queues items. * * @get_tsf: Get the current TSF timer value from firmware/hardware. Currently, * this is only used for IBSS mode debugging and, as such, is not a -- cgit From 36fc6757fe711def63ea3686bf6ed475d714e114 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 29 Apr 2008 17:19:00 +0200 Subject: mac80211: remove queue info from ieee80211_tx_status The queue info in struct ieee80211_tx_status is never used. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 346a7563ef02..ef701d6fd66a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -417,8 +417,6 @@ enum ieee80211_tx_status_flags { * @ampdu_ack_map: block ack bit map for the aggregation. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ack_signal: signal strength of the ACK frame - * @queue_length: ?? REMOVE - * @queue_number: ?? REMOVE */ struct ieee80211_tx_status { struct ieee80211_tx_control control; @@ -428,8 +426,6 @@ struct ieee80211_tx_status { u8 ampdu_ack_len; u64 ampdu_ack_map; int ack_signal; - int queue_length; - int queue_number; }; /** -- cgit From e100bb64bf7cdeae7f742a65ee1985649a7fd1b4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 30 Apr 2008 18:51:21 +0200 Subject: mac80211: QoS related cleanups This * makes the queue number passed to drivers a u16 (as it will be with skb_get_queue_mapping) * removes the useless queue number defines * splits hw->queues into hw->queues/ampdu_queues * removes the debugfs files for per-queue counters * removes some dead QoS code * removes the beacon queue configuration for IBSS so that the drivers now never get a queue number bigger than (hw->queues + hw->ampdu_queues - 1) for tx and only in the range 0..hw->queues-1 for conf_tx. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 66 ++++++++++++++++++-------------------------------- 1 file changed, 24 insertions(+), 42 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index ef701d6fd66a..75a34609eed7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -97,6 +97,18 @@ struct ieee80211_ht_bss_info { u8 bss_op_mode; /* use IEEE80211_HT_IE_ */ }; +/** + * enum ieee80211_max_queues - maximum number of queues + * + * @IEEE80211_MAX_QUEUES: Maximum number of regular device queues. + * @IEEE80211_MAX_AMPDU_QUEUES: Maximum number of queues usable + * for A-MPDU operation. + */ +enum ieee80211_max_queues { + IEEE80211_MAX_QUEUES = 16, + IEEE80211_MAX_AMPDU_QUEUES = 16, +}; + /** * struct ieee80211_tx_queue_params - transmit queue configuration * @@ -129,42 +141,6 @@ struct ieee80211_tx_queue_stats { unsigned int count; }; -/** - * enum ieee80211_tx_queue - transmit queue number - * - * These constants are used with some callbacks that take a - * queue number to set parameters for a queue. - * - * @IEEE80211_TX_QUEUE_DATA0: data queue 0 - * @IEEE80211_TX_QUEUE_DATA1: data queue 1 - * @IEEE80211_TX_QUEUE_DATA2: data queue 2 - * @IEEE80211_TX_QUEUE_DATA3: data queue 3 - * @IEEE80211_TX_QUEUE_DATA4: data queue 4 - * @IEEE80211_TX_QUEUE_SVP: ?? - * @NUM_TX_DATA_QUEUES: number of data queues - * @IEEE80211_TX_QUEUE_AFTER_BEACON: transmit queue for frames to be - * sent after a beacon - * @IEEE80211_TX_QUEUE_BEACON: transmit queue for beacon frames - * @NUM_TX_DATA_QUEUES_AMPDU: adding more queues for A-MPDU - */ -enum ieee80211_tx_queue { - IEEE80211_TX_QUEUE_DATA0, - IEEE80211_TX_QUEUE_DATA1, - IEEE80211_TX_QUEUE_DATA2, - IEEE80211_TX_QUEUE_DATA3, - IEEE80211_TX_QUEUE_DATA4, - IEEE80211_TX_QUEUE_SVP, - - NUM_TX_DATA_QUEUES, - -/* due to stupidity in the sub-ioctl userspace interface, the items in - * this struct need to have fixed values. As soon as it is removed, we can - * fix these entries. */ - IEEE80211_TX_QUEUE_AFTER_BEACON = 6, - IEEE80211_TX_QUEUE_BEACON = 7, - NUM_TX_DATA_QUEUES_AMPDU = 16 -}; - struct ieee80211_low_level_stats { unsigned int dot11ACKFailureCount; unsigned int dot11RTSFailureCount; @@ -315,7 +291,7 @@ struct ieee80211_tx_control { * position represents antenna number used */ u8 icv_len; /* length of the ICV/MIC field in octets */ u8 iv_len; /* length of the IV field in octets */ - u8 queue; /* hardware queue to use for this frame; + u16 queue; /* hardware queue to use for this frame; * 0 = highest, hw->queues-1 = lowest */ u16 aid; /* Station AID */ int type; /* internal */ @@ -772,7 +748,14 @@ enum ieee80211_hw_flags { * @max_noise: like @max_rssi, but for the noise value. * * @queues: number of available hardware transmit queues for - * data packets. WMM/QoS requires at least four. + * data packets. WMM/QoS requires at least four, these + * queues need to have configurable access parameters. + * + * @ampdu_queues: number of available hardware transmit queues + * for A-MPDU packets, these have no access parameters + * because they're used only for A-MPDU frames. Note that + * mac80211 will not currently use any of the regular queues + * for aggregation. * * @rate_control_algorithm: rate control algorithm for this hardware. * If unset (NULL), the default algorithm will be used. Must be @@ -791,7 +774,7 @@ struct ieee80211_hw { unsigned int extra_tx_headroom; int channel_change_time; int vif_data_size; - u8 queues; + u16 queues, ampdu_queues; s8 max_rssi; s8 max_signal; s8 max_noise; @@ -1069,8 +1052,7 @@ enum ieee80211_ampdu_mlme_action { * of assocaited station or AP. * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), - * bursting) for a hardware TX queue. The @queue parameter uses the - * %IEEE80211_TX_QUEUE_* constants. Must be atomic. + * bursting) for a hardware TX queue. Must be atomic. * * @get_tx_stats: Get statistics of the current TX queue status. This is used * to get number of currently queued packets (queue length), maximum queue @@ -1150,7 +1132,7 @@ struct ieee80211_ops { u32 short_retry, u32 long_retr); void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, const u8 *addr); - int (*conf_tx)(struct ieee80211_hw *hw, int queue, + int (*conf_tx)(struct ieee80211_hw *hw, u16 queue, const struct ieee80211_tx_queue_params *params); int (*get_tx_stats)(struct ieee80211_hw *hw, struct ieee80211_tx_queue_stats *stats); -- cgit From 566bfe5a8bcde13188a356f77666f8115813cf31 Mon Sep 17 00:00:00 2001 From: Bruno Randolf Date: Thu, 8 May 2008 19:15:40 +0200 Subject: mac80211: use hardware flags for signal/noise units trying to clean up the signal/noise code. the previous code in mac80211 had confusing names for the related variables, did not have much definition of what units of signal and noise were provided and used implicit mechanisms from the wireless extensions. this patch introduces hardware capability flags to let the hardware specify clearly if it can provide signal and noise level values and which units it can provide. this also anticipates possible new units like RCPI in the future. for signal: IEEE80211_HW_SIGNAL_UNSPEC - unspecified, unknown, hw specific IEEE80211_HW_SIGNAL_DB - dB difference to unspecified reference point IEEE80211_HW_SIGNAL_DBM - dBm, difference to 1mW for noise we currently only have dBm: IEEE80211_HW_NOISE_DBM - dBm, difference to 1mW if IEEE80211_HW_SIGNAL_UNSPEC or IEEE80211_HW_SIGNAL_DB is used the driver has to provide the maximum value (max_signal) it reports in order for applications to make sense of the signal values. i tried my best to find out for each driver what it can provide and update it but i'm not sure (?) for some of them and used the more conservative guess in doubt. this can be fixed easily after this patch has been merged by changing the hardware flags of the driver. DRIVER SIGNAL MAX NOISE QUAL ----------------------------------------------------------------- adm8211 unspec(?) 100 n/a missing at76_usb unspec(?) (?) unused missing ath5k dBm dBm percent rssi b43legacy dBm dBm percent jssi(?) b43 dBm dBm percent jssi(?) iwl-3945 dBm dBm percent snr+more iwl-4965 dBm dBm percent snr+more p54 unspec 127 n/a missing rt2x00 dBm n/a percent rssi+tx/rx frame success rt2400 dBm n/a rt2500pci dBm n/a rt2500usb dBm n/a rt61pci dBm n/a rt73usb dBm n/a rtl8180 unspec(?) 65 n/a (?) rtl8187 unspec(?) 65 (?) noise(?) zd1211 dB(?) 100 n/a percent drivers/net/wireless/ath5k/base.c: Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bruno Randolf Signed-off-by: John W. Linville --- include/net/mac80211.h | 47 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 34 insertions(+), 13 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 75a34609eed7..909956c97c44 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -336,13 +336,16 @@ enum mac80211_rx_flags { * The low-level driver should provide this information (the subset * supported by hardware) to the 802.11 code with each received * frame. + * * @mactime: value in microseconds of the 64-bit Time Synchronization Function * (TSF) timer when the first data symbol (MPDU) arrived at the hardware. * @band: the active band when this frame was received * @freq: frequency the radio was tuned to when receiving this frame, in MHz - * @ssi: signal strength when receiving this frame - * @signal: used as 'qual' in statistics reporting - * @noise: PHY noise when receiving this frame + * @signal: signal strength when receiving this frame, either in dBm, in dB or + * unspecified depending on the hardware capabilities flags + * @IEEE80211_HW_SIGNAL_* + * @noise: noise when receiving this frame, in dBm. + * @qual: overall signal quality indication, in percent (0-100). * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates * @flag: %RX_FLAG_* @@ -351,9 +354,9 @@ struct ieee80211_rx_status { u64 mactime; enum ieee80211_band band; int freq; - int ssi; int signal; int noise; + int qual; int antenna; int rate_idx; int flag; @@ -392,7 +395,8 @@ enum ieee80211_tx_status_flags { * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ack_signal: signal strength of the ACK frame + * @ack_signal: signal strength of the ACK frame either in dBm, dB or unspec + * depending on hardware capabilites flags @IEEE80211_HW_SIGNAL_* */ struct ieee80211_tx_status { struct ieee80211_tx_control control; @@ -703,6 +707,25 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE: * Hardware is not capable of receiving frames with short preamble on * the 2.4 GHz band. + * + * @IEEE80211_HW_SIGNAL_UNSPEC: + * Hardware can provide signal values but we don't know its units. We + * expect values between 0 and @max_signal. + * If possible please provide dB or dBm instead. + * + * @IEEE80211_HW_SIGNAL_DB: + * Hardware gives signal values in dB, decibel difference from an + * arbitrary, fixed reference. We expect values between 0 and @max_signal. + * If possible please provide dBm instead. + * + * @IEEE80211_HW_SIGNAL_DBM: + * Hardware gives signal values in dBm, decibel difference from + * one milliwatt. This is the preferred method since it is standardized + * between different devices. @max_signal does not need to be set. + * + * @IEEE80211_HW_NOISE_DBM: + * Hardware can provide noise (radio interference) values in units dBm, + * decibel difference from one milliwatt. */ enum ieee80211_hw_flags { IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, @@ -710,6 +733,10 @@ enum ieee80211_hw_flags { IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING = 1<<2, IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE = 1<<3, IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4, + IEEE80211_HW_SIGNAL_UNSPEC = 1<<5, + IEEE80211_HW_SIGNAL_DB = 1<<6, + IEEE80211_HW_SIGNAL_DBM = 1<<7, + IEEE80211_HW_NOISE_DBM = 1<<8, }; /** @@ -740,12 +767,8 @@ enum ieee80211_hw_flags { * * @channel_change_time: time (in microseconds) it takes to change channels. * - * @max_rssi: Maximum value for ssi in RX information, use - * negative numbers for dBm and 0 to indicate no support. - * - * @max_signal: like @max_rssi, but for the signal value. - * - * @max_noise: like @max_rssi, but for the noise value. + * @max_signal: Maximum value for signal (rssi) in RX information, used + * only when @IEEE80211_HW_SIGNAL_UNSPEC or @IEEE80211_HW_SIGNAL_DB * * @queues: number of available hardware transmit queues for * data packets. WMM/QoS requires at least four, these @@ -775,9 +798,7 @@ struct ieee80211_hw { int channel_change_time; int vif_data_size; u16 queues, ampdu_queues; - s8 max_rssi; s8 max_signal; - s8 max_noise; }; /** -- cgit From 36d6825b91bc492b65b6333c369cd96a2fc8c903 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 May 2008 12:55:26 +0200 Subject: mac80211: let drivers wake but not start queues Having drivers start queues is just confusing, their ->start() callback can block and do whatever is necessary, so let mac80211 start queues and have drivers wake queues when necessary (to get packets flowing again right away.) Signed-off-by: Johannes Berg Acked-by: David S. Miller Signed-off-by: John W. Linville --- include/net/mac80211.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 909956c97c44..f00fc76a7344 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1566,14 +1566,6 @@ void ieee80211_wake_queue(struct ieee80211_hw *hw, int queue); */ void ieee80211_stop_queue(struct ieee80211_hw *hw, int queue); -/** - * ieee80211_start_queues - start all queues - * @hw: pointer to as obtained from ieee80211_alloc_hw(). - * - * Drivers should use this function instead of netif_start_queue. - */ -void ieee80211_start_queues(struct ieee80211_hw *hw); - /** * ieee80211_stop_queues - stop all queues * @hw: pointer as obtained from ieee80211_alloc_hw(). -- cgit From 2e92e6f2c50b4baf85cca968f0e6f1b5c0df7d39 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 May 2008 12:55:27 +0200 Subject: mac80211: use rate index in TX control This patch modifies struct ieee80211_tx_control to give band info and the rate index (instead of rate pointers) to drivers. This mostly serves to reduce the TX control structure size to make it fit into skb->cb so that the fragmentation code can put it there and we can think about passing it to drivers that way in the future. The rt2x00 driver update was done by Ivo, thanks. Signed-off-by: Ivo van Doorn Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 51 ++++++++++++++++++++++++++++++++++++++------------ 1 file changed, 39 insertions(+), 12 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index f00fc76a7344..0df91bea6c1f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -266,27 +266,26 @@ enum mac80211_tx_control_flags { * ieee80211_ops->remove_interface() callback funtion. * The hw_key pointer is valid until it has been removed with the * ieee80211_ops->set_key() callback function. - * The tx_rate and alt_retry_rate pointers are valid until the phy is - * deregistered. */ struct ieee80211_tx_control { - struct ieee80211_vif *vif; - struct ieee80211_rate *tx_rate; + u32 flags; /* tx control flags defined above */ + + s8 tx_rate_idx, /* Transmit rate (indexes registered rates) */ + rts_cts_rate_idx, /* Transmit rate for RTS/CTS frame */ + alt_retry_rate_idx; /* retry rate for the last retries */ - /* Transmit rate for RTS/CTS frame */ - struct ieee80211_rate *rts_cts_rate; + s8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. + * This could be used when set_retry_limit + * is not implemented by the driver */ - /* retry rate for the last retries */ - struct ieee80211_rate *alt_retry_rate; + struct ieee80211_vif *vif; /* Key used for hardware encryption * NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ struct ieee80211_key_conf *hw_key; - u32 flags; /* tx control flags defined above */ - u8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. - * This could be used when set_retry_limit - * is not implemented by the driver */ + enum ieee80211_band band; + u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit * position represents antenna number used */ u8 icv_len; /* length of the ICV/MIC field in octets */ @@ -298,6 +297,7 @@ struct ieee80211_tx_control { }; + /** * enum mac80211_rx_flags - receive flags * @@ -823,6 +823,33 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); } +static inline struct ieee80211_rate * +ieee80211_get_tx_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_control *c) +{ + if (WARN_ON(c->tx_rate_idx < 0)) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->tx_rate_idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_control *c) +{ + if (c->rts_cts_rate_idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->rts_cts_rate_idx]; +} + +static inline struct ieee80211_rate * +ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, + const struct ieee80211_tx_control *c) +{ + if (c->alt_retry_rate_idx < 0) + return NULL; + return &hw->wiphy->bands[c->band]->bitrates[c->alt_retry_rate_idx]; +} + /** * DOC: Hardware crypto acceleration * -- cgit From e039fa4a4195ac4ee895e6f3d1334beed63256fe Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 15 May 2008 12:55:29 +0200 Subject: mac80211: move TX info into skb->cb This patch converts mac80211 and all drivers to have transmit information and status in skb->cb rather than allocating extra memory for it and copying all the data around. To make it fit, a union is used where only data that is necessary for all steps is kept outside of the union. A number of fixes were done by Ivo, as well as the rt2x00 part of this patch. Signed-off-by: Ivo van Doorn Signed-off-by: Johannes Berg Acked-by: David S. Miller Signed-off-by: John W. Linville --- include/net/mac80211.h | 299 ++++++++++++++++++++++--------------------------- 1 file changed, 133 insertions(+), 166 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0df91bea6c1f..54960b83db79 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -201,101 +201,127 @@ struct ieee80211_bss_conf { }; /** - * enum mac80211_tx_control_flags - flags to describe Tx configuration for - * the Tx frame - * - * These flags are used with the @flags member of &ieee80211_tx_control - * - * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame. - * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption; - * e.g., for EAPOL frame - * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame - * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., - * for combined 802.11g / 802.11b networks) - * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TXCTL_RATE_CTRL_PROBE - * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter - * for destination station - * @IEEE80211_TXCTL_REQUEUE: - * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame - * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the - * through set_retry_limit configured long - * retry value - * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211 - * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon - * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU - * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number - * of streams when this flag is on can be extracted - * from antenna_sel_tx, so if 1 antenna is marked - * use SISO, 2 antennas marked use MIMO, n antennas - * marked use MIMO_n. - * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame - * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width - * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels - * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval + * enum mac80211_tx_flags - flags to transmission information/status + * + * These flags are used with the @flags member of &ieee80211_tx_info + * + * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. + * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; + * e.g., for EAPOL frame + * @IEEE80211_TX_CTL_USE_RTS_CTS: use RTS-CTS before sending frame + * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., + * for combined 802.11g / 802.11b networks) + * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE + * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination + * station + * @IEEE80211_TX_CTL_REQUEUE: + * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame + * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the + * through set_retry_limit configured long retry value + * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 + * @IEEE80211_TX_CTL_SEND_AFTER_DTIM: send this frame after DTIM beacon + * @IEEE80211_TX_CTL_AMPDU: this frame should be sent as part of an A-MPDU + * @IEEE80211_TX_CTL_OFDM_HT: this frame can be sent in HT OFDM rates. number + * of streams when this flag is on can be extracted from antenna_sel_tx, + * so if 1 antenna is marked use SISO, 2 antennas marked use MIMO, n + * antennas marked use MIMO_n. + * @IEEE80211_TX_CTL_GREEN_FIELD: use green field protection for this frame + * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width + * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels + * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval + * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted + * because the destination STA was in powersave mode. + * @IEEE80211_TX_STAT_ACK: Frame was acknowledged + * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status + * is for the whole aggregation. */ enum mac80211_tx_control_flags { - IEEE80211_TXCTL_REQ_TX_STATUS = (1<<0), - IEEE80211_TXCTL_DO_NOT_ENCRYPT = (1<<1), - IEEE80211_TXCTL_USE_RTS_CTS = (1<<2), - IEEE80211_TXCTL_USE_CTS_PROTECT = (1<<3), - IEEE80211_TXCTL_NO_ACK = (1<<4), - IEEE80211_TXCTL_RATE_CTRL_PROBE = (1<<5), - IEEE80211_TXCTL_CLEAR_PS_FILT = (1<<6), - IEEE80211_TXCTL_REQUEUE = (1<<7), - IEEE80211_TXCTL_FIRST_FRAGMENT = (1<<8), - IEEE80211_TXCTL_SHORT_PREAMBLE = (1<<9), - IEEE80211_TXCTL_LONG_RETRY_LIMIT = (1<<10), - IEEE80211_TXCTL_EAPOL_FRAME = (1<<11), - IEEE80211_TXCTL_SEND_AFTER_DTIM = (1<<12), - IEEE80211_TXCTL_AMPDU = (1<<13), - IEEE80211_TXCTL_OFDM_HT = (1<<14), - IEEE80211_TXCTL_GREEN_FIELD = (1<<15), - IEEE80211_TXCTL_40_MHZ_WIDTH = (1<<16), - IEEE80211_TXCTL_DUP_DATA = (1<<17), - IEEE80211_TXCTL_SHORT_GI = (1<<18), + IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), + IEEE80211_TX_CTL_DO_NOT_ENCRYPT = BIT(1), + IEEE80211_TX_CTL_USE_RTS_CTS = BIT(2), + IEEE80211_TX_CTL_USE_CTS_PROTECT = BIT(3), + IEEE80211_TX_CTL_NO_ACK = BIT(4), + IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(5), + IEEE80211_TX_CTL_CLEAR_PS_FILT = BIT(6), + IEEE80211_TX_CTL_REQUEUE = BIT(7), + IEEE80211_TX_CTL_FIRST_FRAGMENT = BIT(8), + IEEE80211_TX_CTL_SHORT_PREAMBLE = BIT(9), + IEEE80211_TX_CTL_LONG_RETRY_LIMIT = BIT(10), + IEEE80211_TX_CTL_EAPOL_FRAME = BIT(11), + IEEE80211_TX_CTL_SEND_AFTER_DTIM = BIT(12), + IEEE80211_TX_CTL_AMPDU = BIT(13), + IEEE80211_TX_CTL_OFDM_HT = BIT(14), + IEEE80211_TX_CTL_GREEN_FIELD = BIT(15), + IEEE80211_TX_CTL_40_MHZ_WIDTH = BIT(16), + IEEE80211_TX_CTL_DUP_DATA = BIT(17), + IEEE80211_TX_CTL_SHORT_GI = BIT(18), + IEEE80211_TX_CTL_INJECTED = BIT(19), + IEEE80211_TX_STAT_TX_FILTERED = BIT(20), + IEEE80211_TX_STAT_ACK = BIT(21), + IEEE80211_TX_STAT_AMPDU = BIT(22), }; -/* Transmit control fields. This data structure is passed to low-level driver - * with each TX frame. The low-level driver is responsible for configuring - * the hardware to use given values (depending on what is supported). - * - * NOTE: Be careful with using the pointers outside of the ieee80211_ops->tx() - * context (i.e. when defering the work to a workqueue). - * The vif pointer is valid until the it has been removed with the - * ieee80211_ops->remove_interface() callback funtion. - * The hw_key pointer is valid until it has been removed with the - * ieee80211_ops->set_key() callback function. - */ -struct ieee80211_tx_control { - u32 flags; /* tx control flags defined above */ - - s8 tx_rate_idx, /* Transmit rate (indexes registered rates) */ - rts_cts_rate_idx, /* Transmit rate for RTS/CTS frame */ - alt_retry_rate_idx; /* retry rate for the last retries */ - - s8 retry_limit; /* 1 = only first attempt, 2 = one retry, .. - * This could be used when set_retry_limit - * is not implemented by the driver */ - struct ieee80211_vif *vif; - - /* Key used for hardware encryption - * NULL if IEEE80211_TXCTL_DO_NOT_ENCRYPT is set */ - struct ieee80211_key_conf *hw_key; +#define IEEE80211_TX_INFO_DRIVER_DATA_SIZE \ + (sizeof(((struct sk_buff *)0)->cb) - 8) +#define IEEE80211_TX_INFO_DRIVER_DATA_PTRS \ + (IEEE80211_TX_INFO_DRIVER_DATA_SIZE / sizeof(void *)) - enum ieee80211_band band; +/** + * struct ieee80211_tx_info - skb transmit information + * + * This structure is placed in skb->cb for three uses: + * (1) mac80211 TX control - mac80211 tells the driver what to do + * (2) driver internal use (if applicable) + * (3) TX status information - driver tells mac80211 what happened + * + * @flags: transmit info flags, defined above + * @retry_count: number of retries + * @excessive_retries: set to 1 if the frame was retried many times + * but not acknowledged + * @ampdu_ack_len: number of aggregated frames. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ampdu_ack_map: block ack bit map for the aggregation. + * relevant only if IEEE80211_TX_STATUS_AMPDU was set. + * @ack_signal: signal strength of the ACK frame + */ +struct ieee80211_tx_info { + /* common information */ + u32 flags; + u8 band; + s8 tx_rate_idx; + u8 antenna_sel_tx; - u8 antenna_sel_tx; /* 0 = default/diversity, otherwise bit - * position represents antenna number used */ - u8 icv_len; /* length of the ICV/MIC field in octets */ - u8 iv_len; /* length of the IV field in octets */ - u16 queue; /* hardware queue to use for this frame; - * 0 = highest, hw->queues-1 = lowest */ - u16 aid; /* Station AID */ - int type; /* internal */ + u8 queue; /* use skb_queue_mapping soon */ + + union { + struct { + struct ieee80211_vif *vif; + struct ieee80211_key_conf *hw_key; + unsigned long jiffies; + int ifindex; + u16 aid; + s8 rts_cts_rate_idx, alt_retry_rate_idx; + u8 retry_limit; + u8 icv_len; + u8 iv_len; + } control; + struct { + u64 ampdu_ack_map; + int ack_signal; + u8 retry_count; + bool excessive_retries; + u8 ampdu_ack_len; + } status; + void *driver_data[IEEE80211_TX_INFO_DRIVER_DATA_PTRS]; + }; }; +static inline struct ieee80211_tx_info *IEEE80211_SKB_CB(struct sk_buff *skb) +{ + return (struct ieee80211_tx_info *)skb->cb; +} /** @@ -362,52 +388,6 @@ struct ieee80211_rx_status { int flag; }; -/** - * enum ieee80211_tx_status_flags - transmit status flags - * - * Status flags to indicate various transmit conditions. - * - * @IEEE80211_TX_STATUS_TX_FILTERED: The frame was not transmitted - * because the destination STA was in powersave mode. - * @IEEE80211_TX_STATUS_ACK: Frame was acknowledged - * @IEEE80211_TX_STATUS_AMPDU: The frame was aggregated, so status - * is for the whole aggregation. - */ -enum ieee80211_tx_status_flags { - IEEE80211_TX_STATUS_TX_FILTERED = 1<<0, - IEEE80211_TX_STATUS_ACK = 1<<1, - IEEE80211_TX_STATUS_AMPDU = 1<<2, -}; - -/** - * struct ieee80211_tx_status - transmit status - * - * As much information as possible should be provided for each transmitted - * frame with ieee80211_tx_status(). - * - * @control: a copy of the &struct ieee80211_tx_control passed to the driver - * in the tx() callback. - * @flags: transmit status flags, defined above - * @retry_count: number of retries - * @excessive_retries: set to 1 if the frame was retried many times - * but not acknowledged - * @ampdu_ack_len: number of aggregated frames. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ampdu_ack_map: block ack bit map for the aggregation. - * relevant only if IEEE80211_TX_STATUS_AMPDU was set. - * @ack_signal: signal strength of the ACK frame either in dBm, dB or unspec - * depending on hardware capabilites flags @IEEE80211_HW_SIGNAL_* - */ -struct ieee80211_tx_status { - struct ieee80211_tx_control control; - u8 flags; - u8 retry_count; - bool excessive_retries; - u8 ampdu_ack_len; - u64 ampdu_ack_map; - int ack_signal; -}; - /** * enum ieee80211_conf_flags - configuration flags * @@ -563,7 +543,6 @@ struct ieee80211_if_conf { u8 *ssid; size_t ssid_len; struct sk_buff *beacon; - struct ieee80211_tx_control *beacon_control; }; /** @@ -825,7 +804,7 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { if (WARN_ON(c->tx_rate_idx < 0)) return NULL; @@ -834,20 +813,20 @@ ieee80211_get_tx_rate(const struct ieee80211_hw *hw, static inline struct ieee80211_rate * ieee80211_get_rts_cts_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { - if (c->rts_cts_rate_idx < 0) + if (c->control.rts_cts_rate_idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->rts_cts_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.rts_cts_rate_idx]; } static inline struct ieee80211_rate * ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw, - const struct ieee80211_tx_control *c) + const struct ieee80211_tx_info *c) { - if (c->alt_retry_rate_idx < 0) + if (c->control.alt_retry_rate_idx < 0) return NULL; - return &hw->wiphy->bands[c->band]->bitrates[c->alt_retry_rate_idx]; + return &hw->wiphy->bands[c->band]->bitrates[c->control.alt_retry_rate_idx]; } /** @@ -1142,8 +1121,7 @@ enum ieee80211_ampdu_mlme_action { * that TX/RX_STOP can pass NULL for this parameter. */ struct ieee80211_ops { - int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb, - struct ieee80211_tx_control *control); + int (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); int (*start)(struct ieee80211_hw *hw); void (*stop)(struct ieee80211_hw *hw); int (*add_interface)(struct ieee80211_hw *hw, @@ -1187,8 +1165,7 @@ struct ieee80211_ops { u64 (*get_tsf)(struct ieee80211_hw *hw); void (*reset_tsf)(struct ieee80211_hw *hw); int (*beacon_update)(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_control *control); + struct sk_buff *skb); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, @@ -1384,13 +1361,9 @@ void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** * ieee80211_tx_status_irqsafe - irq-safe transmit status callback @@ -1403,13 +1376,9 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, * * @hw: the hardware the frame was transmitted by * @skb: the frame that was transmitted, owned by mac80211 after this call - * @status: status information for this frame; the status pointer need not - * be valid after this function returns and is not freed by mac80211, - * it is recommended that it points to a stack area */ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, - struct sk_buff *skb, - struct ieee80211_tx_status *status); + struct sk_buff *skb); /** * ieee80211_beacon_get - beacon generation function @@ -1425,8 +1394,7 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, * is responsible of freeing it. */ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); + struct ieee80211_vif *vif); /** * ieee80211_rts_get - RTS frame generation function @@ -1434,7 +1402,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the RTS. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @rts: The buffer where to store the RTS frame. * * If the RTS frames are generated by the host system (i.e., not in @@ -1444,7 +1412,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, */ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_rts *rts); /** @@ -1452,7 +1420,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the RTS. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the RTS is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1460,7 +1428,7 @@ void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, */ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_ctstoself_get - CTS-to-self frame generation function @@ -1468,7 +1436,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame: pointer to the frame that is going to be protected by the CTS-to-self. * @frame_len: the frame length (in octets). - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * @cts: The buffer where to store the CTS-to-self frame. * * If the CTS-to-self frames are generated by the host system (i.e., not in @@ -1479,7 +1447,7 @@ __le16 ieee80211_rts_duration(struct ieee80211_hw *hw, void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, const void *frame, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl, + const struct ieee80211_tx_info *frame_txctl, struct ieee80211_cts *cts); /** @@ -1487,7 +1455,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from &struct ieee80211_if_init_conf. * @frame_len: the length of the frame that is going to be protected by the CTS-to-self. - * @frame_txctl: &struct ieee80211_tx_control of the frame. + * @frame_txctl: &struct ieee80211_tx_info of the frame. * * If the CTS-to-self is generated in firmware, but the host system must provide * the duration field, the low-level driver uses this function to receive @@ -1496,7 +1464,7 @@ void ieee80211_ctstoself_get(struct ieee80211_hw *hw, __le16 ieee80211_ctstoself_duration(struct ieee80211_hw *hw, struct ieee80211_vif *vif, size_t frame_len, - const struct ieee80211_tx_control *frame_txctl); + const struct ieee80211_tx_info *frame_txctl); /** * ieee80211_generic_frame_duration - Calculate the duration field for a frame @@ -1535,8 +1503,7 @@ __le16 ieee80211_generic_frame_duration(struct ieee80211_hw *hw, * use common code for all beacons. */ struct sk_buff * -ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif, - struct ieee80211_tx_control *control); +ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); /** * ieee80211_get_hdrlen_from_skb - get header length from data -- cgit From eefce91a384a64c7bbf913eb08c4adfb911c3639 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 17 May 2008 00:57:13 +0200 Subject: mac80211: dont allow fragmentation and requeuing on A-MPDU queues There really is no reason for a driver to reject a frame on an A-MPDU queue when it can stop that queue for any period of time and is given frames one by one. Hence, disallow it with a big warning and reduce mac80211-internal state. Also add a warning when we try to fragment a frame destined for an A-MPDU queue and drop it, the actual bug needs to be fixed elsewhere but I'm not exactly sure how to yet. Signed-off-by: Johannes Berg Cc: Ron Rindjunsky Signed-off-by: John W. Linville --- include/net/mac80211.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 54960b83db79..4df39eb9115f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -986,8 +986,10 @@ enum ieee80211_ampdu_mlme_action { * @tx: Handler that 802.11 module calls for each transmitted frame. * skb contains the buffer starting from the IEEE 802.11 header. * The low-level driver should send the frame out based on - * configuration in the TX control data. Must be implemented and - * atomic. + * configuration in the TX control data. This handler should, + * preferably, never fail and stop queues appropriately, more + * importantly, however, it must never fail for A-MPDU-queues. + * Must be implemented and atomic. * * @start: Called before the first netdevice attached to the hardware * is enabled. This should turn on the hardware and must turn on -- cgit From e2530083609148a7835b54c431f6b8956407c1f6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 17 May 2008 00:57:14 +0200 Subject: mac80211: use multi-queue master netdevice This patch updates mac80211 and drivers to be multi-queue aware and use that instead of the internal queue mapping. Also does a number of cleanups in various pieces of the code that fall out and reduces internal mac80211 state size. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4df39eb9115f..c80e3be8f79e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -293,7 +293,7 @@ struct ieee80211_tx_info { s8 tx_rate_idx; u8 antenna_sel_tx; - u8 queue; /* use skb_queue_mapping soon */ + /* 1 byte hole */ union { struct { @@ -802,6 +802,24 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) memcpy(hw->wiphy->perm_addr, addr, ETH_ALEN); } +static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_QOS + return hw->queues; +#else + return 1; +#endif +} + +static inline int ieee80211_num_queues(struct ieee80211_hw *hw) +{ +#ifdef CONFIG_MAC80211_QOS + return hw->queues + hw->ampdu_queues; +#else + return 1; +#endif +} + static inline struct ieee80211_rate * ieee80211_get_tx_rate(const struct ieee80211_hw *hw, const struct ieee80211_tx_info *c) -- cgit From c9c6950c14ffc0e30e592fec1ebcb203ad3dff10 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 11 Jun 2008 14:21:57 -0700 Subject: mac80211: make ieee80211_get_hdrlen_from_skb return unsigned Many callers already expect it to. Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- include/net/mac80211.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1196de85f8db..f9b391faaf76 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1535,7 +1535,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, struct ieee80211_vif *vif); * * @skb: the frame */ -int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); +unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); /** * ieee80211_get_hdrlen - get header length from frame control -- cgit From 6693be7124cb8e4f15f0d80ed6e3e50678771737 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 11 Jun 2008 14:21:57 -0700 Subject: mac80211: add utility function to get header length Take a __le16 directly rather than a host-endian value. Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- include/net/mac80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index f9b391faaf76..7ab4ff6159a2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1547,6 +1547,12 @@ unsigned int ieee80211_get_hdrlen_from_skb(const struct sk_buff *skb); */ int ieee80211_get_hdrlen(u16 fc); +/** + * ieee80211_hdrlen - get header length in bytes from frame control + * @fc: frame control field in little-endian format + */ +unsigned int ieee80211_hdrlen(__le16 fc); + /** * ieee80211_get_tkip_key - get a TKIP rc4 for skb * -- cgit From ffd7891dc909b3648e87f7cf8f84a6dc12fc1cc6 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Sat, 21 Jun 2008 10:02:46 -0400 Subject: mac80211: Let drivers have access to TKIP key offets for TX and RX MIC Some drivers may want to to use the TKIP key offsets for TX and RX MIC so lets move this out. Lets also clear up a bit how this is used internally in mac80211. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- include/net/mac80211.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7ab4ff6159a2..19f1e412a0f0 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -595,7 +595,12 @@ enum ieee80211_key_flags { * @flags: key flags, see &enum ieee80211_key_flags. * @keyidx: the key index (0-3) * @keylen: key material length - * @key: key material + * @key: key material. For ALG_TKIP the key is encoded as a 256-bit (32 byte) + * data block: + * - Temporal Encryption Key (128 bits) + * - Temporal Authenticator Tx MIC Key (64 bits) + * - Temporal Authenticator Rx MIC Key (64 bits) + * */ struct ieee80211_key_conf { enum ieee80211_key_alg alg; -- cgit From 428da76523e4a9c08bdfadc25a05b520f19b9133 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 24 Jun 2008 19:23:36 +0200 Subject: mac80211: Add RTNL warning for workqueue The workqueue provided by mac80211 should not be used for scheduled tasks that acquire the RTNL lock. This could be done when the driver uses the function ieee80211_iterate_active_interfaces() within the scheduled work. Such behavior will end in locking dependencies problems when an interface is being removed. This patch will add a notification about the RTNL locking and the mac80211 workqueue to prevent driver developers from blindly using it. Signed-off-by: Ivo van Doorn Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 19f1e412a0f0..02c79e6b309e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -738,8 +738,11 @@ enum ieee80211_hw_flags { * @conf: &struct ieee80211_conf, device configuration, don't use. * * @workqueue: single threaded workqueue available for driver use, - * allocated by mac80211 on registration and flushed on - * unregistration. + * allocated by mac80211 on registration and flushed when an + * interface is removed. + * NOTICE: All work performed on this workqueue should NEVER + * acquire the RTNL lock (i.e. Don't use the function + * ieee80211_iterate_active_interfaces()) * * @priv: pointer to private area that was allocated for driver use * along with this structure. -- cgit From 06ff47bc9595848b818ac79e7d8069337c6e58b1 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 18 Jun 2008 17:53:44 +0300 Subject: mac80211: add spectrum capabilities This patch add spectrum capability and required information elements to association request providing AP has requested it and it is supported by the driver Signed-off-by: Tomas Winkler Signed-off-by: Assaf Krauss Signed-off-by: John W. Linville --- include/net/mac80211.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 02c79e6b309e..a7044958c75f 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -710,6 +710,10 @@ enum ieee80211_tkip_key_type { * @IEEE80211_HW_NOISE_DBM: * Hardware can provide noise (radio interference) values in units dBm, * decibel difference from one milliwatt. + * + * @IEEE80211_HW_SPECTRUM_MGMT: + * Hardware supports spectrum management defined in 802.11h + * Measurement, Channel Switch, Quieting, TPC */ enum ieee80211_hw_flags { IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE = 1<<0, @@ -721,6 +725,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_SIGNAL_DB = 1<<6, IEEE80211_HW_SIGNAL_DBM = 1<<7, IEEE80211_HW_NOISE_DBM = 1<<8, + IEEE80211_HW_SPECTRUM_MGMT = 1<<9, }; /** -- cgit From 429a380571a6e6b8525b93161544eafc9b227e44 Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Tue, 1 Jul 2008 14:16:03 +0300 Subject: mac80211: add block ack request capability This patch adds block ack request capability Signed-off-by: Ester Kummer Signed-off-by: Tomas Winkler Signed-off-by: Ron Rindjunsky Acked-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3a204acad901..0a5de3ef527a 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -235,6 +235,8 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_STAT_ACK: Frame was acknowledged * @IEEE80211_TX_STAT_AMPDU: The frame was aggregated, so status * is for the whole aggregation. + * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, + * so consider using block ack request (BAR). */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -260,6 +262,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_TX_FILTERED = BIT(20), IEEE80211_TX_STAT_ACK = BIT(21), IEEE80211_TX_STAT_AMPDU = BIT(22), + IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), }; -- cgit From 6ef307bc561911c8cdda98ef3896b5982b602a43 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 3 Jul 2008 13:52:18 -0700 Subject: mac80211: fix lots of kernel-doc Fix more than 50 kernel-doc warnings in ieee80211/mac80211 kernel-doc notation. Fix a few typos also. Note: Some fields are marked as TBD and need to have their description corrected. Signed-off-by: Randy Dunlap Signed-off-by: John W. Linville --- include/net/mac80211.h | 40 +++++++++++++++++++++++++--------------- 1 file changed, 25 insertions(+), 15 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0a5de3ef527a..656442c6b1c3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -42,7 +42,7 @@ * tasklet function. * * NOTE: If the driver opts to use the _irqsafe() functions, it may not also - * use the non-irqsafe functions! + * use the non-IRQ-safe functions! */ /** @@ -85,7 +85,7 @@ enum ieee80211_notification_types { * struct ieee80211_ht_bss_info - describing BSS's HT characteristics * * This structure describes most essential parameters needed - * to describe 802.11n HT characteristics in a BSS + * to describe 802.11n HT characteristics in a BSS. * * @primary_channel: channel number of primery channel * @bss_cap: 802.11n's general BSS capabilities (e.g. channel width) @@ -201,9 +201,9 @@ struct ieee80211_bss_conf { }; /** - * enum mac80211_tx_flags - flags to transmission information/status + * enum mac80211_tx_control_flags - flags to describe transmission information/status * - * These flags are used with the @flags member of &ieee80211_tx_info + * These flags are used with the @flags member of &ieee80211_tx_info. * * @IEEE80211_TX_CTL_REQ_TX_STATUS: request TX status callback for this frame. * @IEEE80211_TX_CTL_DO_NOT_ENCRYPT: send this frame without encryption; @@ -212,11 +212,12 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g., * for combined 802.11g / 802.11b networks) * @IEEE80211_TX_CTL_NO_ACK: tell the low level not to wait for an ack - * @IEEE80211_TX_CTL_RATE_CTRL_PROBE + * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: TBD * @IEEE80211_TX_CTL_CLEAR_PS_FILT: clear powersave filter for destination * station - * @IEEE80211_TX_CTL_REQUEUE: + * @IEEE80211_TX_CTL_REQUEUE: TBD * @IEEE80211_TX_CTL_FIRST_FRAGMENT: this is a first fragment of the frame + * @IEEE80211_TX_CTL_SHORT_PREAMBLE: TBD * @IEEE80211_TX_CTL_LONG_RETRY_LIMIT: this frame should be send using the * through set_retry_limit configured long retry value * @IEEE80211_TX_CTL_EAPOL_FRAME: internal to mac80211 @@ -230,6 +231,7 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width * @IEEE80211_TX_CTL_DUP_DATA: duplicate data frame on both 20 Mhz channels * @IEEE80211_TX_CTL_SHORT_GI: send this frame using short guard interval + * @IEEE80211_TX_CTL_INJECTED: TBD * @IEEE80211_TX_STAT_TX_FILTERED: The frame was not transmitted * because the destination STA was in powersave mode. * @IEEE80211_TX_STAT_ACK: Frame was acknowledged @@ -280,6 +282,12 @@ enum mac80211_tx_control_flags { * (3) TX status information - driver tells mac80211 what happened * * @flags: transmit info flags, defined above + * @band: TBD + * @tx_rate_idx: TBD + * @antenna_sel_tx: TBD + * @control: union for control data + * @status: union for status data + * @driver_data: array of driver_data pointers * @retry_count: number of retries * @excessive_retries: set to 1 if the frame was retried many times * but not acknowledged @@ -562,8 +570,8 @@ enum ieee80211_key_alg { /** * enum ieee80211_key_len - key length - * @WEP40: WEP 5 byte long key - * @WEP104: WEP 13 byte long key + * @LEN_WEP40: WEP 5-byte long key + * @LEN_WEP104: WEP 13-byte long key */ enum ieee80211_key_len { LEN_WEP40 = 5, @@ -640,7 +648,7 @@ enum set_key_cmd { * enum sta_notify_cmd - sta notify command * * Used with the sta_notify() callback in &struct ieee80211_ops, this - * indicates addition and removal of a station to station table + * indicates addition and removal of a station to station table. * * @STA_NOTIFY_ADD: a station was added to the station table * @STA_NOTIFY_REMOVE: a station being removed from the station table @@ -1340,7 +1348,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw); * * This function frees everything that was allocated, including the * private data for the driver. You must call ieee80211_unregister_hw() - * before calling this function + * before calling this function. * * @hw: the hardware to free */ @@ -1411,7 +1419,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb); /** - * ieee80211_tx_status_irqsafe - irq-safe transmit status callback + * ieee80211_tx_status_irqsafe - IRQ-safe transmit status callback * * Like ieee80211_tx_status() but can be called in IRQ context * (internally defers to a tasklet.) @@ -1589,6 +1597,8 @@ unsigned int ieee80211_hdrlen(__le16 fc); * @keyconf: the parameter passed with the set key * @skb: the skb for which the key is needed * @rc4key: a buffer to which the key will be written + * @type: TBD + * @key: TBD */ void ieee80211_get_tkip_key(struct ieee80211_key_conf *keyconf, struct sk_buff *skb, @@ -1639,7 +1649,7 @@ void ieee80211_wake_queues(struct ieee80211_hw *hw); void ieee80211_scan_completed(struct ieee80211_hw *hw); /** - * ieee80211_iterate_active_interfaces- iterate active interfaces + * ieee80211_iterate_active_interfaces - iterate active interfaces * * This function iterates over the interfaces associated with a given * hardware that are currently active and calls the callback for them. @@ -1706,7 +1716,7 @@ void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid); * * This function must be called by low level driver once it has * finished with preparations for the BA session. - * This version of the function is irq safe. + * This version of the function is IRQ-safe. */ void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, u16 tid); @@ -1746,7 +1756,7 @@ void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid); * * This function must be called by low level driver once it has * finished with preparations for the BA session tear down. - * This version of the function is irq safe. + * This version of the function is IRQ-safe. */ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, u16 tid); @@ -1754,7 +1764,7 @@ void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw, const u8 *ra, /** * ieee80211_notify_mac - low level driver notification * @hw: pointer as obtained from ieee80211_alloc_hw(). - * @notification_types: enum ieee80211_notification_types + * @notif_type: enum ieee80211_notification_types * * This function must be called by low level driver to inform mac80211 of * low level driver status change or force mac80211 to re-assoc for low -- cgit From 49292d56352a6ab90d04c3448dd8b6106dfef2d6 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 4 Jul 2008 10:49:31 +0200 Subject: mac80211: power management wext hooks This patch implements the power management routines wireless extensions for mac80211. For now we only support switching PS mode between on and off. Signed-off-by: Samuel Ortiz Signed-off-by: John W. Linville --- include/net/mac80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 656442c6b1c3..9672a04c4f7b 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -407,11 +407,13 @@ struct ieee80211_rx_status { * @IEEE80211_CONF_SHORT_SLOT_TIME: use 802.11g short slot time * @IEEE80211_CONF_RADIOTAP: add radiotap header at receive time (if supported) * @IEEE80211_CONF_SUPPORT_HT_MODE: use 802.11n HT capabilities (if supported) + * @IEEE80211_CONF_PS: Enable 802.11 power save mode */ enum ieee80211_conf_flags { IEEE80211_CONF_SHORT_SLOT_TIME = (1<<0), IEEE80211_CONF_RADIOTAP = (1<<1), IEEE80211_CONF_SUPPORT_HT_MODE = (1<<2), + IEEE80211_CONF_PS = (1<<3), }; /** -- cgit From 9d139c810a2aa17365cc548d0cd2a189d8433c65 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 9 Jul 2008 14:40:37 +0200 Subject: mac80211: revamp beacon configuration This patch changes mac80211's beacon configuration handling to never pass skbs to the driver directly but rather always require the driver to use ieee80211_beacon_get(). Additionally, it introduces "change flags" on the config_interface() call to enable drivers to figure out what is changing. Finally, it removes the beacon_update() driver callback in favour of having IBSS beacon delivered by ieee80211_beacon_get() as well. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 49 ++++++++++++++++--------------------------------- 1 file changed, 16 insertions(+), 33 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 9672a04c4f7b..47c072eab42c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -528,34 +528,39 @@ struct ieee80211_if_init_conf { void *mac_addr; }; +/** + * enum ieee80211_if_conf_change - interface config change flags + * + * @IEEE80211_IFCC_BSSID: The BSSID changed. + * @IEEE80211_IFCC_SSID: The SSID changed. + * @IEEE80211_IFCC_BEACON: The beacon for this interface changed + * (currently AP and MESH only), use ieee80211_beacon_get(). + */ +enum ieee80211_if_conf_change { + IEEE80211_IFCC_BSSID = BIT(0), + IEEE80211_IFCC_SSID = BIT(1), + IEEE80211_IFCC_BEACON = BIT(2), +}; + /** * struct ieee80211_if_conf - configuration of an interface * - * @type: type of the interface. This is always the same as was specified in - * &struct ieee80211_if_init_conf. The type of an interface never changes - * during the life of the interface; this field is present only for - * convenience. + * @changed: parameters that have changed, see &enum ieee80211_if_conf_change. * @bssid: BSSID of the network we are associated to/creating. * @ssid: used (together with @ssid_len) by drivers for hardware that * generate beacons independently. The pointer is valid only during the * config_interface() call, so copy the value somewhere if you need * it. * @ssid_len: length of the @ssid field. - * @beacon: beacon template. Valid only if @host_gen_beacon_template in - * &struct ieee80211_hw is set. The driver is responsible of freeing - * the sk_buff. - * @beacon_control: tx_control for the beacon template, this field is only - * valid when the @beacon field was set. * * This structure is passed to the config_interface() callback of * &struct ieee80211_hw. */ struct ieee80211_if_conf { - int type; + u32 changed; u8 *bssid; u8 *ssid; size_t ssid_len; - struct sk_buff *beacon; }; /** @@ -683,15 +688,6 @@ enum ieee80211_tkip_key_type { * any particular flags. There are some exceptions to this rule, * however, so you are advised to review these flags carefully. * - * @IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE: - * The device only needs to be supplied with a beacon template. - * If you need the host to generate each beacon then don't use - * this flag and call ieee80211_beacon_get() when you need the - * next beacon frame. Note that if you set this flag, you must - * implement the set_tim() callback for powersave mode to work - * properly. - * This flag is only relevant for access-point mode. - * * @IEEE80211_HW_RX_INCLUDES_FCS: * Indicates that received frames passed to the stack include * the FCS at the end. @@ -1151,17 +1147,6 @@ enum ieee80211_ampdu_mlme_action { * function is optional if the firmware/hardware takes full care of * TSF synchronization. * - * @beacon_update: Setup beacon data for IBSS beacons. Unlike access point, - * IBSS uses a fixed beacon frame which is configured using this - * function. - * If the driver returns success (0) from this callback, it owns - * the skb. That means the driver is responsible to kfree_skb() it. - * The control structure is not dynamically allocated. That means the - * driver does not own the pointer and if it needs it somewhere - * outside of the context of this function, it must copy it - * somewhere else. - * This handler is required only for IBSS mode. - * * @tx_last_beacon: Determine whether the last IBSS beacon was sent by us. * This is needed only for IBSS mode and the result of this function is * used to determine whether to reply to Probe Requests. @@ -1219,8 +1204,6 @@ struct ieee80211_ops { struct ieee80211_tx_queue_stats *stats); u64 (*get_tsf)(struct ieee80211_hw *hw); void (*reset_tsf)(struct ieee80211_hw *hw); - int (*beacon_update)(struct ieee80211_hw *hw, - struct sk_buff *skb); int (*tx_last_beacon)(struct ieee80211_hw *hw); int (*ampdu_action)(struct ieee80211_hw *hw, enum ieee80211_ampdu_mlme_action action, -- cgit From f591fa5dbbbeaebd95c9c019b3a536a327fb79de Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 10 Jul 2008 11:21:26 +0200 Subject: mac80211: fix TX sequence numbers This patch makes mac80211 assign proper sequence numbers to QoS-data frames. It also removes the old sequence number code because we noticed that only the driver or hardware can assign sequence numbers to non-QoS-data and especially management frames in a race-free manner because beacons aren't passed through mac80211's TX path. This patch also adds temporary code to the rt2x00 drivers to not break them completely, that code will have to be reworked for proper sequence numbers on beacons. It also moves sequence number assignment down in the TX path so no sequence numbers are assigned to frames that are dropped. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 47c072eab42c..1dbd49fc557e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -239,6 +239,17 @@ struct ieee80211_bss_conf { * is for the whole aggregation. * @IEEE80211_TX_STAT_AMPDU_NO_BACK: no block ack was returned, * so consider using block ack request (BAR). + * @IEEE80211_TX_CTL_ASSIGN_SEQ: The driver has to assign a sequence + * number to this frame, taking care of not overwriting the fragment + * number and increasing the sequence number only when the + * IEEE80211_TX_CTL_FIRST_FRAGMENT flags is set. mac80211 will properly + * assign sequence numbers to QoS-data frames but cannot do so correctly + * for non-QoS-data and management frames because beacons need them from + * that counter as well and mac80211 cannot guarantee proper sequencing. + * If this flag is set, the driver should instruct the hardware to + * assign a sequence number to the frame or assign one itself. Cf. IEEE + * 802.11-2007 7.1.3.4.1 paragraph 3. This flag will always be set for + * beacons always be clear for frames without a sequence number field. */ enum mac80211_tx_control_flags { IEEE80211_TX_CTL_REQ_TX_STATUS = BIT(0), @@ -265,6 +276,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_ACK = BIT(21), IEEE80211_TX_STAT_AMPDU = BIT(22), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(23), + IEEE80211_TX_CTL_ASSIGN_SEQ = BIT(24), }; -- cgit From f434b2d111d9ff84ebdd0f11a7ae42c761453259 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 10 Jul 2008 11:22:31 +0200 Subject: mac80211: fix struct ieee80211_tx_queue_params Multiple issues: - there are no "default" values needed - cw_min/cw_max can be larger than documented - restructure to decrease size - use get_unaligned_le16 Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1dbd49fc557e..24a69f6075c2 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -115,17 +115,17 @@ enum ieee80211_max_queues { * The information provided in this structure is required for QoS * transmit queue configuration. Cf. IEEE 802.11 7.3.2.29. * - * @aifs: arbitration interface space [0..255, -1: use default] - * @cw_min: minimum contention window [will be a value of the form - * 2^n-1 in the range 1..1023; 0: use default] + * @aifs: arbitration interface space [0..255] + * @cw_min: minimum contention window [a value of the form + * 2^n-1 in the range 1..32767] * @cw_max: maximum contention window [like @cw_min] * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled */ struct ieee80211_tx_queue_params { - s16 aifs; + u16 txop; u16 cw_min; u16 cw_max; - u16 txop; + u8 aifs; }; /** -- cgit From 51cb6db0f5654f08a4a6bfa3888dc36a51c2df3e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 15 Jul 2008 03:34:57 -0700 Subject: mac80211: Reimplement WME using ->select_queue(). The only behavior change is that we do not drop packets under any circumstances. If that is absolutely needed, we could easily add it back. With cleanups and help from Johannes Berg. Signed-off-by: David S. Miller --- include/net/mac80211.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 24a69f6075c2..4dd3d93e1960 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -847,20 +847,12 @@ static inline void SET_IEEE80211_PERM_ADDR(struct ieee80211_hw *hw, u8 *addr) static inline int ieee80211_num_regular_queues(struct ieee80211_hw *hw) { -#ifdef CONFIG_MAC80211_QOS return hw->queues; -#else - return 1; -#endif } static inline int ieee80211_num_queues(struct ieee80211_hw *hw) { -#ifdef CONFIG_MAC80211_QOS return hw->queues + hw->ampdu_queues; -#else - return 1; -#endif } static inline struct ieee80211_rate * -- cgit