From 326c29b6bedb7440b4232631686027af84a62cf5 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Thu, 4 Jul 2013 08:56:27 +0100 Subject: mfd: arizona: Add GPIO control register bit definitions Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- include/linux/mfd/arizona/gpio.h | 96 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 include/linux/mfd/arizona/gpio.h (limited to 'include') diff --git a/include/linux/mfd/arizona/gpio.h b/include/linux/mfd/arizona/gpio.h new file mode 100644 index 000000000000..d2146bb74f89 --- /dev/null +++ b/include/linux/mfd/arizona/gpio.h @@ -0,0 +1,96 @@ +/* + * GPIO configuration for Arizona devices + * + * Copyright 2013 Wolfson Microelectronics. PLC. + * + * Author: Charles Keepax + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _ARIZONA_GPIO_H +#define _ARIZONA_GPIO_H + +#define ARIZONA_GP_FN_TXLRCLK 0x00 +#define ARIZONA_GP_FN_GPIO 0x01 +#define ARIZONA_GP_FN_IRQ1 0x02 +#define ARIZONA_GP_FN_IRQ2 0x03 +#define ARIZONA_GP_FN_OPCLK 0x04 +#define ARIZONA_GP_FN_FLL1_OUT 0x05 +#define ARIZONA_GP_FN_FLL2_OUT 0x06 +#define ARIZONA_GP_FN_PWM1 0x08 +#define ARIZONA_GP_FN_PWM2 0x09 +#define ARIZONA_GP_FN_SYSCLK_UNDERCLOCKED 0x0A +#define ARIZONA_GP_FN_ASYNCCLK_UNDERCLOCKED 0x0B +#define ARIZONA_GP_FN_FLL1_LOCK 0x0C +#define ARIZONA_GP_FN_FLL2_LOCK 0x0D +#define ARIZONA_GP_FN_FLL1_CLOCK_OK 0x0F +#define ARIZONA_GP_FN_FLL2_CLOCK_OK 0x10 +#define ARIZONA_GP_FN_HEADPHONE_DET 0x12 +#define ARIZONA_GP_FN_MIC_DET 0x13 +#define ARIZONA_GP_FN_WSEQ_STATUS 0x15 +#define ARIZONA_GP_FN_CIF_ADDRESS_ERROR 0x16 +#define ARIZONA_GP_FN_ASRC1_LOCK 0x1A +#define ARIZONA_GP_FN_ASRC2_LOCK 0x1B +#define ARIZONA_GP_FN_ASRC_CONFIG_ERROR 0x1C +#define ARIZONA_GP_FN_DRC1_SIGNAL_DETECT 0x1D +#define ARIZONA_GP_FN_DRC1_ANTICLIP 0x1E +#define ARIZONA_GP_FN_DRC1_DECAY 0x1F +#define ARIZONA_GP_FN_DRC1_NOISE 0x20 +#define ARIZONA_GP_FN_DRC1_QUICK_RELEASE 0x21 +#define ARIZONA_GP_FN_DRC2_SIGNAL_DETECT 0x22 +#define ARIZONA_GP_FN_DRC2_ANTICLIP 0x23 +#define ARIZONA_GP_FN_DRC2_DECAY 0x24 +#define ARIZONA_GP_FN_DRC2_NOISE 0x25 +#define ARIZONA_GP_FN_DRC2_QUICK_RELEASE 0x26 +#define ARIZONA_GP_FN_MIXER_DROPPED_SAMPLE 0x27 +#define ARIZONA_GP_FN_AIF1_CONFIG_ERROR 0x28 +#define ARIZONA_GP_FN_AIF2_CONFIG_ERROR 0x29 +#define ARIZONA_GP_FN_AIF3_CONFIG_ERROR 0x2A +#define ARIZONA_GP_FN_SPK_TEMP_SHUTDOWN 0x2B +#define ARIZONA_GP_FN_SPK_TEMP_WARNING 0x2C +#define ARIZONA_GP_FN_UNDERCLOCKED 0x2D +#define ARIZONA_GP_FN_OVERCLOCKED 0x2E +#define ARIZONA_GP_FN_DSP_IRQ1 0x35 +#define ARIZONA_GP_FN_DSP_IRQ2 0x36 +#define ARIZONA_GP_FN_ASYNC_OPCLK 0x3D +#define ARIZONA_GP_FN_BOOT_DONE 0x44 +#define ARIZONA_GP_FN_DSP1_RAM_READY 0x45 +#define ARIZONA_GP_FN_SYSCLK_ENA_STATUS 0x4B +#define ARIZONA_GP_FN_ASYNCCLK_ENA_STATUS 0x4C + +#define ARIZONA_GPN_DIR 0x8000 /* GPN_DIR */ +#define ARIZONA_GPN_DIR_MASK 0x8000 /* GPN_DIR */ +#define ARIZONA_GPN_DIR_SHIFT 15 /* GPN_DIR */ +#define ARIZONA_GPN_DIR_WIDTH 1 /* GPN_DIR */ +#define ARIZONA_GPN_PU 0x4000 /* GPN_PU */ +#define ARIZONA_GPN_PU_MASK 0x4000 /* GPN_PU */ +#define ARIZONA_GPN_PU_SHIFT 14 /* GPN_PU */ +#define ARIZONA_GPN_PU_WIDTH 1 /* GPN_PU */ +#define ARIZONA_GPN_PD 0x2000 /* GPN_PD */ +#define ARIZONA_GPN_PD_MASK 0x2000 /* GPN_PD */ +#define ARIZONA_GPN_PD_SHIFT 13 /* GPN_PD */ +#define ARIZONA_GPN_PD_WIDTH 1 /* GPN_PD */ +#define ARIZONA_GPN_LVL 0x0800 /* GPN_LVL */ +#define ARIZONA_GPN_LVL_MASK 0x0800 /* GPN_LVL */ +#define ARIZONA_GPN_LVL_SHIFT 11 /* GPN_LVL */ +#define ARIZONA_GPN_LVL_WIDTH 1 /* GPN_LVL */ +#define ARIZONA_GPN_POL 0x0400 /* GPN_POL */ +#define ARIZONA_GPN_POL_MASK 0x0400 /* GPN_POL */ +#define ARIZONA_GPN_POL_SHIFT 10 /* GPN_POL */ +#define ARIZONA_GPN_POL_WIDTH 1 /* GPN_POL */ +#define ARIZONA_GPN_OP_CFG 0x0200 /* GPN_OP_CFG */ +#define ARIZONA_GPN_OP_CFG_MASK 0x0200 /* GPN_OP_CFG */ +#define ARIZONA_GPN_OP_CFG_SHIFT 9 /* GPN_OP_CFG */ +#define ARIZONA_GPN_OP_CFG_WIDTH 1 /* GPN_OP_CFG */ +#define ARIZONA_GPN_DB 0x0100 /* GPN_DB */ +#define ARIZONA_GPN_DB_MASK 0x0100 /* GPN_DB */ +#define ARIZONA_GPN_DB_SHIFT 8 /* GPN_DB */ +#define ARIZONA_GPN_DB_WIDTH 1 /* GPN_DB */ +#define ARIZONA_GPN_FN_MASK 0x007F /* GPN_DB */ +#define ARIZONA_GPN_FN_SHIFT 0 /* GPN_DB */ +#define ARIZONA_GPN_FN_WIDTH 7 /* GPN_DB */ + +#endif -- cgit From 10175b3b2fdd287515db4c103d96b323bb4cd690 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Wed, 3 Jul 2013 16:37:59 +0800 Subject: ARM: atmel-ssc: change phybase type to dma_addr_t as the phybase paramter only used for DMA operation, change it's type from resource_size_t to dma_addr_t Signed-off-by: Bo Shen Reviewed-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/linux/atmel-ssc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h index deb0ae58b99b..66a0e5384edd 100644 --- a/include/linux/atmel-ssc.h +++ b/include/linux/atmel-ssc.h @@ -11,7 +11,7 @@ struct atmel_ssc_platform_data { struct ssc_device { struct list_head list; - resource_size_t phybase; + dma_addr_t phybase; void __iomem *regs; struct platform_device *pdev; struct atmel_ssc_platform_data *pdata; -- cgit From c3f48ae6fd5a1ebdcaff5efe35f88f31daaee225 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 24 Jul 2013 15:27:36 +0200 Subject: ASoC: dapm: Pass snd_soc_card directly to soc_dpcm_runtime_update() soc_dpcm_runtime_update() operates on a ASoC card as a whole. Currently it takes a snd_soc_dapm_widget as its only parameter though. The widget is then used to look up the card and is otherwise unused. This patch changes the function to take a pointer to the card directly. This makes it possible to to call soc_dpcm_runtime_update() for updates which are not related to one specific widget. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dpcm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/soc-dpcm.h b/include/sound/soc-dpcm.h index 04598f1efd77..047d657c331c 100644 --- a/include/sound/soc-dpcm.h +++ b/include/sound/soc-dpcm.h @@ -133,6 +133,6 @@ void snd_soc_dpcm_be_set_state(struct snd_soc_pcm_runtime *be, int stream, /* internal use only */ int soc_dpcm_be_digital_mute(struct snd_soc_pcm_runtime *fe, int mute); int soc_dpcm_debugfs_add(struct snd_soc_pcm_runtime *rtd); -int soc_dpcm_runtime_update(struct snd_soc_dapm_widget *); +int soc_dpcm_runtime_update(struct snd_soc_card *); #endif -- cgit From ce6cfaf1de136cd3e6ed7c0ed984be8d003a58c1 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 24 Jul 2013 15:27:37 +0200 Subject: ASoC: dapm: Run widget updates for shared controls at the same time Currently when updating a control that is shared between multiple widgets the whole power-up/power-down sequence is being run once for each widget. The control register is updated during the first run, which means the CODEC internal routing is also updated for all widgets during this first run. The input and output paths for each widgets are only updated though during the respective run for that widget. This leads to a slight inconsistency between the CODEC's internal state and ASoC's state, which causes non optimal behavior in regard to click and pop avoidance. E.g. consider the following setup where two MUXs share the same control. +------+ A1 ------| | | MUX1 |----- C1 B1 ------| | +------+ | control ---+ | +------+ A2 ------| | | MUX2 |----- C2 B2 ------| | +------+ If the control is updated to switch the MUXs from input A to input B with the current code the power-up/power-down sequence will look like this: Run soc_dapm_mux_update_power for MUX1 Power-down A1 Update MUXing Power-up B1 Run soc_dapm_mux_update_power for MUX2 Power-down A2 (Update MUXing) Power-up B2 Note that the second 'Update Muxing' is a no-op, since the register was already updated. While the preferred order for avoiding pops and clicks should be: Run soc_dapm_mux_update_power for control Power-down A1 Power-down A2 Update MUXing Power-up B1 Power-up B2 This patch changes the behavior to the later by running the updates for all widgets that the control is attached to at the same time. The new code is also a bit simpler since callers of soc_dapm_{mux,muxer}_update_power don't have to loop over each widget anymore and neither do we need to keep track for which of the kcontrol's widgets the current update is. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 3e479f4e15f5..3717ad089486 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -391,10 +391,10 @@ void snd_soc_dapm_stream_event(struct snd_soc_pcm_runtime *rtd, int stream, void snd_soc_dapm_shutdown(struct snd_soc_card *card); /* external DAPM widget events */ -int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_widget *widget, +int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_context *dapm, struct snd_kcontrol *kcontrol, int connect); -int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_widget *widget, - struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e); +int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_context *dapm, + struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e); /* dapm sys fs - used by the core */ int snd_soc_dapm_sys_add(struct device *dev); @@ -559,7 +559,6 @@ struct snd_soc_dapm_widget { }; struct snd_soc_dapm_update { - struct snd_soc_dapm_widget *widget; struct snd_kcontrol *kcontrol; int reg; int mask; -- cgit From 6b3fc03b3b614ced09df96ca60ab6f627d8c240c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Wed, 24 Jul 2013 15:27:38 +0200 Subject: ASoC: dapm: Add a update parameter to snd_soc_dapm_{mux,mixer}_update_power In order to avoid race conditions the assignment of dapm->update should happen while card->dapm_mutex is being held. To allow CODEC drivers to run a register update when using snd_soc_dapm_mux_update_power() or snd_soc_dapm_mixer_update_power() add a update parameter to these two functions. The update parameter will be assigned to dapm->update while card->dapm_mutex is locked. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 3717ad089486..e77c6f5a8390 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -333,6 +333,7 @@ struct snd_soc_dapm_route; struct snd_soc_dapm_context; struct regulator; struct snd_soc_dapm_widget_list; +struct snd_soc_dapm_update; int dapm_reg_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event); @@ -392,9 +393,11 @@ void snd_soc_dapm_shutdown(struct snd_soc_card *card); /* external DAPM widget events */ int snd_soc_dapm_mixer_update_power(struct snd_soc_dapm_context *dapm, - struct snd_kcontrol *kcontrol, int connect); + struct snd_kcontrol *kcontrol, int connect, + struct snd_soc_dapm_update *update); int snd_soc_dapm_mux_update_power(struct snd_soc_dapm_context *dapm, - struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e); + struct snd_kcontrol *kcontrol, int mux, struct soc_enum *e, + struct snd_soc_dapm_update *update); /* dapm sys fs - used by the core */ int snd_soc_dapm_sys_add(struct device *dev); -- cgit From 1536a968892aa9095aada4b6d2ed326432cd71c8 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 21 Jul 2013 21:35:52 -0700 Subject: ASoC: add Renesas R-Car core feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuits are different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2). (Actually, there are many difference in Generation1 chips) Basically, for the future, Renesas R-Car series will use Gen2 style sound circuit, but driver should care Gen1 also. The main differences between Gen1 and Gen2 peripheral are 1) register offset, 2) data path. This patch adds basic (core) feature for R-Car series sound driver as prototype Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 include/sound/rcar_snd.h (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h new file mode 100644 index 000000000000..7272b2ea7108 --- /dev/null +++ b/include/sound/rcar_snd.h @@ -0,0 +1,33 @@ +/* + * Renesas R-Car SRU/SCU/SSIU/SSI support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * Kuninori Morimoto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef RCAR_SND_H +#define RCAR_SND_H + +#include + + +#define RSND_BASE_MAX 0 + +struct rsnd_dai_platform_info { + int ssi_id_playback; + int ssi_id_capture; +}; + +struct rcar_snd_info { + u32 flags; + struct rsnd_dai_platform_info *dai_info; + int dai_info_nr; + int (*start)(int id); + int (*stop)(int id); +}; + +#endif -- cgit From 3337744ac41bee00b0068ad5f926dd9c27540809 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 21 Jul 2013 21:36:21 -0700 Subject: ASoC: add Renesas R-Car Generation feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) The main difference between Gen1 and Gen2 are 1) register offset, 2) data path In order to control Gen1/Gen2 by same method, this patch adds gen.c. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h index 7272b2ea7108..14942a827fe5 100644 --- a/include/sound/rcar_snd.h +++ b/include/sound/rcar_snd.h @@ -22,6 +22,16 @@ struct rsnd_dai_platform_info { int ssi_id_capture; }; +/* + * flags + * + * 0x0000000A + * + * A : generation + */ +#define RSND_GEN1 (1 << 0) /* fixme */ +#define RSND_GEN2 (2 << 0) /* fixme */ + struct rcar_snd_info { u32 flags; struct rsnd_dai_platform_info *dai_info; -- cgit From 07539c1de82cdc0ecbe72b413762b2e920407227 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 21 Jul 2013 21:36:35 -0700 Subject: ASoC: add Renesas R-Car SCU feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds SCU feature on this driver. But, it defines SCU style only, does nothing at this point. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h index 14942a827fe5..01f2e453dcbf 100644 --- a/include/sound/rcar_snd.h +++ b/include/sound/rcar_snd.h @@ -14,8 +14,15 @@ #include +#define RSND_GEN1_SRU 0 -#define RSND_BASE_MAX 0 +#define RSND_GEN2_SRU 0 + +#define RSND_BASE_MAX 1 + +struct rsnd_scu_platform_info { + u32 flags; +}; struct rsnd_dai_platform_info { int ssi_id_playback; @@ -34,6 +41,8 @@ struct rsnd_dai_platform_info { struct rcar_snd_info { u32 flags; + struct rsnd_scu_platform_info *scu_info; + int scu_info_nr; struct rsnd_dai_platform_info *dai_info; int dai_info_nr; int (*start)(int id); -- cgit From dfc9403b7c1f566bb099a12c58aee20589e390f1 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 21 Jul 2013 21:36:46 -0700 Subject: ASoC: add Renesas R-Car ADG feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds ADG feature which controls sound clock Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h index 01f2e453dcbf..6babd6f7b537 100644 --- a/include/sound/rcar_snd.h +++ b/include/sound/rcar_snd.h @@ -15,10 +15,12 @@ #include #define RSND_GEN1_SRU 0 +#define RSND_GEN1_ADG 1 #define RSND_GEN2_SRU 0 +#define RSND_GEN2_ADG 1 -#define RSND_BASE_MAX 1 +#define RSND_BASE_MAX 2 struct rsnd_scu_platform_info { u32 flags; -- cgit From ae5c322303fff50b93d60e34c6563f1264a5941b Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 21 Jul 2013 21:36:57 -0700 Subject: ASoC: add Renesas R-Car SSI feature Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) As 1st protype, this patch adds SSI feature on this driver. But, it is PIO sound playback support only at this point. The DMA transfer, and capture feature will be supported in the future Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h index 6babd6f7b537..99d8dd029906 100644 --- a/include/sound/rcar_snd.h +++ b/include/sound/rcar_snd.h @@ -16,11 +16,30 @@ #define RSND_GEN1_SRU 0 #define RSND_GEN1_ADG 1 +#define RSND_GEN1_SSI 2 #define RSND_GEN2_SRU 0 #define RSND_GEN2_ADG 1 +#define RSND_GEN2_SSIU 2 +#define RSND_GEN2_SSI 3 -#define RSND_BASE_MAX 2 +#define RSND_BASE_MAX 4 + +/* + * flags + * + * 0xA0000000 + * + * A : clock sharing settings + */ +#define RSND_SSI_CLK_PIN_SHARE (1 << 31) +#define RSND_SSI_CLK_FROM_ADG (1 << 30) /* clock parent is master */ +#define RSND_SSI_SYNC (1 << 29) /* SSI34_sync etc */ + +struct rsnd_ssi_platform_info { + int pio_irq; + u32 flags; +}; struct rsnd_scu_platform_info { u32 flags; @@ -43,6 +62,8 @@ struct rsnd_dai_platform_info { struct rcar_snd_info { u32 flags; + struct rsnd_ssi_platform_info *ssi_info; + int ssi_info_nr; struct rsnd_scu_platform_info *scu_info; int scu_info_nr; struct rsnd_dai_platform_info *dai_info; -- cgit From 4fefd69853a4e83040ddaa98d3b6e5e12cc4f97a Mon Sep 17 00:00:00 2001 From: Dimitris Papastamos Date: Mon, 29 Jul 2013 13:51:58 +0100 Subject: ASoC: core: Add snd_soc_card_get_kcontrol() This is useful for drivers who want to grab a pointer to snd_kcontrol outside of the kcontrol callbacks. Signed-off-by: Dimitris Papastamos Signed-off-by: Mark Brown --- include/sound/soc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index 6eabee7ec15a..b33d1de46396 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -475,6 +475,8 @@ int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops); struct snd_kcontrol *snd_soc_cnew(const struct snd_kcontrol_new *_template, void *data, const char *long_name, const char *prefix); +struct snd_kcontrol *snd_soc_card_get_kcontrol(struct snd_soc_card *soc_card, + const char *name); int snd_soc_add_codec_controls(struct snd_soc_codec *codec, const struct snd_kcontrol_new *controls, int num_controls); int snd_soc_add_platform_controls(struct snd_soc_platform *platform, -- cgit From 564c65049eddb1a95b48958080db97eda88c98dd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 29 Jul 2013 17:13:55 +0200 Subject: ASoC: dapm: Move snd_soc_dapm_update from dapm context to card The update field of a DAPM context is only assigned while the card's dapm_mutex is locked, the field is also cleared again while the mutex is stil locked. So there will only ever be one DAPM context at a time with a non-NULL update field. So it is safe to move the update field from the DAPM context struct to the card struct. Doing so will allow further cleanups in this area. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 2 -- include/sound/soc.h | 1 + 2 files changed, 1 insertion(+), 2 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index e77c6f5a8390..3397292d94c8 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -575,8 +575,6 @@ struct snd_soc_dapm_context { struct delayed_work delayed_work; unsigned int idle_bias_off:1; /* Use BIAS_OFF instead of STANDBY */ - struct snd_soc_dapm_update *update; - void (*seq_notifier)(struct snd_soc_dapm_context *, enum snd_soc_dapm_type, int); diff --git a/include/sound/soc.h b/include/sound/soc.h index 6eabee7ec15a..b1e1f967ae1e 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1042,6 +1042,7 @@ struct snd_soc_card { /* Generic DAPM context for the card */ struct snd_soc_dapm_context dapm; struct snd_soc_dapm_stats dapm_stats; + struct snd_soc_dapm_update *update; #ifdef CONFIG_DEBUG_FS struct dentry *debugfs_card_root; -- cgit From eee5d7f99ae95059e1a3d1cfa2dea3ed8dbd94ac Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 29 Jul 2013 17:13:57 +0200 Subject: ASoC: dapm: Add a helper to get the CODEC for DAPM kcontrol We use the same 3 lines to get the CODEC for a kcontrol in a quite a few places. This patch puts them into a common helper function. Having this encapsulated in a helper function will also make it more easier to eventually change the data layout of the kcontrol's private data. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 3397292d94c8..ebfae8f3fda7 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -427,6 +427,8 @@ void dapm_mark_io_dirty(struct snd_soc_dapm_context *dapm); int snd_soc_dapm_dai_get_connected_widgets(struct snd_soc_dai *dai, int stream, struct snd_soc_dapm_widget_list **list); +struct snd_soc_codec *snd_soc_dapm_kcontrol_codec(struct snd_kcontrol *kcontrol); + /* dapm widget types */ enum snd_soc_dapm_type { snd_soc_dapm_input = 0, /* input pin */ -- cgit From cf7c1de20c576477d42deae255cbc6e439bb5dc0 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 29 Jul 2013 17:13:59 +0200 Subject: ASoC: dapm: Move 'value' field from widget to control The 'value' field is really per control and not per widget. Currently it is only used for virtual MUXes, which only have one control per widget. So in that case there is not so much of a difference between whether it is stored per widget or per control. Moving the 'value' field from the widget to the control will allow us to use it also for cases where we have more than one control per widget. E.g. for mixers with multiple input controls. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index ebfae8f3fda7..d7d26cc8e3fc 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -523,7 +523,6 @@ struct snd_soc_dapm_widget { /* dapm control */ int reg; /* negative reg = no direct dapm */ unsigned char shift; /* bits to shift */ - unsigned int value; /* widget current value */ unsigned int mask; /* non-shifted mask */ unsigned int on_val; /* on state value */ unsigned int off_val; /* off state value */ -- cgit From 5106b92f80a2cd37c52cffed80b4f5acfb77ccfd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 29 Jul 2013 17:14:00 +0200 Subject: ASoC: dapm: Keep a list of paths per kcontrol Currently we store for each path which control (if any at all) is associated with that control. But we are only ever interested in the reverse relationship, i.e. we want to know all the paths a certain control is associated with. This is currently implemented by always iterating over all paths. This patch updates the code to keep a list for each control which contains all the paths that are associated with that control. This improves the run time of e.g. soc_dapm_mixer_update_power() and soc_dapm_mux_update_power() from O(n) (with n being the number of paths for the card) to O(1). Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index d7d26cc8e3fc..693c75bbd5d1 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -490,7 +490,6 @@ struct snd_soc_dapm_path { /* source (input) and sink (output) widgets */ struct snd_soc_dapm_widget *source; struct snd_soc_dapm_widget *sink; - struct snd_kcontrol *kcontrol; /* status */ u32 connect:1; /* source and sink widgets are connected */ @@ -503,6 +502,7 @@ struct snd_soc_dapm_path { struct list_head list_source; struct list_head list_sink; + struct list_head list_kcontrol; struct list_head list; }; -- cgit From de9ba98b6d2629f53fd271a973176c2fa9736d9c Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 29 Jul 2013 17:14:01 +0200 Subject: ASoC: dapm: Make widget power register settings more flexible Currently the DAPM code is limited to only setting or clearing a single bit in a register to power a widget up or down. This patch extends the DAPM code to be more flexible in that regard and allow widgets to use arbitrary values to be used to put a widget in either on or off state. Since the snd_soc_dapm_widget struct already contains a on_val and off_val field no additional fields need to be added and in fact the invert field can even be removed. Also the generated code is slightly smaller. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 163 +++++++++++++++++++++++++++-------------------- 1 file changed, 93 insertions(+), 70 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 693c75bbd5d1..3575721a955d 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -70,121 +70,144 @@ struct device; .num_kcontrols = 0, .reg = SND_SOC_NOPM, .event = wevent, \ .event_flags = SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD} +#define SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert) \ + .reg = wreg, .mask = 1, .shift = wshift, \ + .on_val = winvert ? 0 : 1, .off_val = winvert ? 1 : 0 + /* path domain */ #define SND_SOC_DAPM_PGA(wname, wreg, wshift, winvert,\ wcontrols, wncontrols) \ -{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} +{ .id = snd_soc_dapm_pga, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_OUT_DRV(wname, wreg, wshift, winvert,\ wcontrols, wncontrols) \ -{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} +{ .id = snd_soc_dapm_out_drv, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MIXER(wname, wreg, wshift, winvert, \ wcontrols, wncontrols)\ -{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} +{ .id = snd_soc_dapm_mixer, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MIXER_NAMED_CTL(wname, wreg, wshift, winvert, \ wcontrols, wncontrols)\ -{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \ - .num_kcontrols = wncontrols} +{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = wncontrols} #define SND_SOC_DAPM_MICBIAS(wname, wreg, wshift, winvert) \ -{ .id = snd_soc_dapm_micbias, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = NULL, .num_kcontrols = 0} +{ .id = snd_soc_dapm_micbias, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = NULL, .num_kcontrols = 0} #define SND_SOC_DAPM_SWITCH(wname, wreg, wshift, winvert, wcontrols) \ -{ .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1} +{ .id = snd_soc_dapm_switch, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_MUX(wname, wreg, wshift, winvert, wcontrols) \ -{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1} +{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, \ + .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_VIRT_MUX(wname, wreg, wshift, winvert, wcontrols) \ -{ .id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1} +{ .id = snd_soc_dapm_virt_mux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1} #define SND_SOC_DAPM_VALUE_MUX(wname, wreg, wshift, winvert, wcontrols) \ -{ .id = snd_soc_dapm_value_mux, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \ - .num_kcontrols = 1} +{ .id = snd_soc_dapm_value_mux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1} /* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */ #define SOC_PGA_ARRAY(wname, wreg, wshift, winvert,\ wcontrols) \ -{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} +{ .id = snd_soc_dapm_pga, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} #define SOC_MIXER_ARRAY(wname, wreg, wshift, winvert, \ wcontrols)\ -{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} +{ .id = snd_soc_dapm_mixer, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} #define SOC_MIXER_NAMED_CTL_ARRAY(wname, wreg, wshift, winvert, \ wcontrols)\ -{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .kcontrol_news = wcontrols, \ - .num_kcontrols = ARRAY_SIZE(wcontrols)} +{ .id = snd_soc_dapm_mixer_named_ctl, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols)} /* path domain with event - event handler must return 0 for success */ #define SND_SOC_DAPM_PGA_E(wname, wreg, wshift, winvert, wcontrols, \ wncontrols, wevent, wflags) \ -{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ +{ .id = snd_soc_dapm_pga, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_OUT_DRV_E(wname, wreg, wshift, winvert, wcontrols, \ wncontrols, wevent, wflags) \ -{ .id = snd_soc_dapm_out_drv, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ +{ .id = snd_soc_dapm_out_drv, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MIXER_E(wname, wreg, wshift, winvert, wcontrols, \ wncontrols, wevent, wflags) \ -{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ +{ .id = snd_soc_dapm_mixer, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = wncontrols, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MIXER_NAMED_CTL_E(wname, wreg, wshift, winvert, \ wcontrols, wncontrols, wevent, wflags) \ -{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, \ +{ .id = snd_soc_dapm_mixer, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, \ .num_kcontrols = wncontrols, .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ -{ .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \ +{ .id = snd_soc_dapm_switch, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ -{ .id = snd_soc_dapm_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \ +{ .id = snd_soc_dapm_mux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_VIRT_MUX_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ -{ .id = snd_soc_dapm_virt_mux, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = 1, \ +{ .id = snd_soc_dapm_virt_mux, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = 1, \ .event = wevent, .event_flags = wflags} /* additional sequencing control within an event type */ #define SND_SOC_DAPM_PGA_S(wname, wsubseq, wreg, wshift, winvert, \ wevent, wflags) \ -{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .event = wevent, .event_flags = wflags, \ +{ .id = snd_soc_dapm_pga, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .event = wevent, .event_flags = wflags, \ .subseq = wsubseq} #define SND_SOC_DAPM_SUPPLY_S(wname, wsubseq, wreg, wshift, winvert, wevent, \ wflags) \ -{ .id = snd_soc_dapm_supply, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .event = wevent, \ - .event_flags = wflags, .subseq = wsubseq} +{ .id = snd_soc_dapm_supply, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .event = wevent, .event_flags = wflags, .subseq = wsubseq} /* Simplified versions of above macros, assuming wncontrols = ARRAY_SIZE(wcontrols) */ #define SOC_PGA_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ -{ .id = snd_soc_dapm_pga, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ +{ .id = snd_soc_dapm_pga, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ .event = wevent, .event_flags = wflags} #define SOC_MIXER_E_ARRAY(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ -{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ +{ .id = snd_soc_dapm_mixer, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ .event = wevent, .event_flags = wflags} #define SOC_MIXER_NAMED_CTL_E_ARRAY(wname, wreg, wshift, winvert, \ wcontrols, wevent, wflags) \ -{ .id = snd_soc_dapm_mixer, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrol_news = wcontrols, \ - .num_kcontrols = ARRAY_SIZE(wcontrols), .event = wevent, .event_flags = wflags} +{ .id = snd_soc_dapm_mixer, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .kcontrol_news = wcontrols, .num_kcontrols = ARRAY_SIZE(wcontrols), \ + .event = wevent, .event_flags = wflags} /* events that are pre and post DAPM */ #define SND_SOC_DAPM_PRE(wname, wevent) \ @@ -199,35 +222,36 @@ struct device; /* stream domain */ #define SND_SOC_DAPM_AIF_IN(wname, stname, wslot, wreg, wshift, winvert) \ { .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \ - .reg = wreg, .shift = wshift, .invert = winvert } + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), } #define SND_SOC_DAPM_AIF_IN_E(wname, stname, wslot, wreg, wshift, winvert, \ wevent, wflags) \ { .id = snd_soc_dapm_aif_in, .name = wname, .sname = stname, \ - .reg = wreg, .shift = wshift, .invert = winvert, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .event = wevent, .event_flags = wflags } #define SND_SOC_DAPM_AIF_OUT(wname, stname, wslot, wreg, wshift, winvert) \ { .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \ - .reg = wreg, .shift = wshift, .invert = winvert } + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), } #define SND_SOC_DAPM_AIF_OUT_E(wname, stname, wslot, wreg, wshift, winvert, \ wevent, wflags) \ { .id = snd_soc_dapm_aif_out, .name = wname, .sname = stname, \ - .reg = wreg, .shift = wshift, .invert = winvert, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .event = wevent, .event_flags = wflags } #define SND_SOC_DAPM_DAC(wname, stname, wreg, wshift, winvert) \ -{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \ - .shift = wshift, .invert = winvert} +{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert) } #define SND_SOC_DAPM_DAC_E(wname, stname, wreg, wshift, winvert, \ wevent, wflags) \ -{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, .reg = wreg, \ - .shift = wshift, .invert = winvert, \ +{ .id = snd_soc_dapm_dac, .name = wname, .sname = stname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .event = wevent, .event_flags = wflags} + #define SND_SOC_DAPM_ADC(wname, stname, wreg, wshift, winvert) \ -{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \ - .shift = wshift, .invert = winvert} +{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), } #define SND_SOC_DAPM_ADC_E(wname, stname, wreg, wshift, winvert, \ wevent, wflags) \ -{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, .reg = wreg, \ - .shift = wshift, .invert = winvert, \ +{ .id = snd_soc_dapm_adc, .name = wname, .sname = stname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_CLOCK_SUPPLY(wname) \ { .id = snd_soc_dapm_clock_supply, .name = wname, \ @@ -241,14 +265,14 @@ struct device; .on_val = won_val, .off_val = woff_val, .event = dapm_reg_event, \ .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD} #define SND_SOC_DAPM_SUPPLY(wname, wreg, wshift, winvert, wevent, wflags) \ -{ .id = snd_soc_dapm_supply, .name = wname, .reg = wreg, \ - .shift = wshift, .invert = winvert, .event = wevent, \ - .event_flags = wflags} +{ .id = snd_soc_dapm_supply, .name = wname, \ + SND_SOC_DAPM_INIT_REG_VAL(wreg, wshift, winvert), \ + .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_REGULATOR_SUPPLY(wname, wdelay, wflags) \ { .id = snd_soc_dapm_regulator_supply, .name = wname, \ .reg = SND_SOC_NOPM, .shift = wdelay, .event = dapm_regulator_event, \ .event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD, \ - .invert = wflags} + .on_val = wflags} /* dapm kcontrol types */ @@ -527,7 +551,6 @@ struct snd_soc_dapm_widget { unsigned int on_val; /* on state value */ unsigned int off_val; /* off state value */ unsigned char power:1; /* block power status */ - unsigned char invert:1; /* invert the power bit */ unsigned char active:1; /* active stream on DAC, ADC's */ unsigned char connected:1; /* connected codec pin */ unsigned char new:1; /* cnew complete */ -- cgit From 8fe120b5a665fc869c23f86e4964b801f6e53486 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 31 Jul 2013 19:00:32 +0200 Subject: ASoC: omap-abe-twl6040: Remove support for pdata (legacy boot) Just recently OMAP4 legacy boot support has been removed. No reason to keep the code used by the legacy boot (pdata based) since neither OMAP4 or OMAP5 can boot in this mode. Signed-off-by: Peter Ujfalusi Signed-off-by: Mark Brown --- include/linux/platform_data/omap-abe-twl6040.h | 49 -------------------------- 1 file changed, 49 deletions(-) delete mode 100644 include/linux/platform_data/omap-abe-twl6040.h (limited to 'include') diff --git a/include/linux/platform_data/omap-abe-twl6040.h b/include/linux/platform_data/omap-abe-twl6040.h deleted file mode 100644 index 5d298ac10fc2..000000000000 --- a/include/linux/platform_data/omap-abe-twl6040.h +++ /dev/null @@ -1,49 +0,0 @@ -/** - * omap-abe-twl6040.h - ASoC machine driver OMAP4+ devices, header. - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com - * All rights reserved. - * - * Author: Peter Ujfalusi - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef _OMAP_ABE_TWL6040_H_ -#define _OMAP_ABE_TWL6040_H_ - -/* To select if only one channel is connected in a stereo port */ -#define ABE_TWL6040_LEFT (1 << 0) -#define ABE_TWL6040_RIGHT (1 << 1) - -struct omap_abe_twl6040_data { - char *card_name; - /* Feature flags for connected audio pins */ - u8 has_hs; - u8 has_hf; - bool has_ep; - u8 has_aux; - u8 has_vibra; - bool has_dmic; - bool has_hsmic; - bool has_mainmic; - bool has_submic; - u8 has_afm; - /* Other features */ - bool jack_detection; /* board can detect jack events */ - int mclk_freq; /* MCLK frequency speed for twl6040 */ -}; - -#endif /* _OMAP_ABE_TWL6040_H_ */ -- cgit From 57295073b6acfdfaf9319d3caf92a5c433fdf109 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 5 Aug 2013 11:27:31 +0200 Subject: ASoC: dapm: Implement mixer input auto-disable Some devices have the problem that if a internal audio signal source is disabled the output of the source becomes undefined or goes to a undesired state (E.g. DAC output goes to ground instead of VMID). In this case it is necessary, in order to avoid unwanted clicks and pops, to disable any mixer input the signal feeds into or to active a mute control along the path to the output. Often it is still desirable to expose the same mixer input control to userspace, so cerain paths can sill be disabled manually. This means we can not use conventional DAPM to manage the mixer input control. This patch implements a method for letting DAPM overwrite the state of a userspace visible control. I.e. DAPM will disable the control if the path on which the control sits becomes inactive. Userspace will then only see a cached copy of the controls state. Once DAPM powers the path up again it will sync the userspace setting with the hardware and give control back to userspace. To implement this a new widget type is introduced. One widget of this type will be created for each DAPM kcontrol which has the auto-disable feature enabled. For each path that is controlled by the kcontrol the widget will be connected to the source of that path. The new widget type behaves like a supply widget, which means it will power up if one of its sinks are powered up and will only power down if all of its sinks are powered down. In order to only have the mixer input enabled when the source signal is valid the new widget type will be disabled before all other widget types and only be enabled after all other widget types. E.g. consider the following simplified example. A DAC is connected to a mixer and the mixer has a control to enable or disable the signal from the DAC. +-------+ +-----+ | | | DAC |-----[Ctrl]-| Mixer | +-----+ : | | | : +-------+ | : +-------------+ | Ctrl widget | +-------------+ If the control has the auto-disable feature enabled we'll create a widget for the control. This widget is connected to the DAC as it is the source for the mixer input. If the DAC powers up the control widget powers up and if the DAC powers down the control widget is powered down. As long as the control widget is powered down the hardware input control is kept disabled and if it is enabled userspace can freely change the control's state. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc-dapm.h | 17 +++++++++++++++-- include/sound/soc.h | 28 +++++++++++++++------------- 2 files changed, 30 insertions(+), 15 deletions(-) (limited to 'include') diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 3575721a955d..c728d28ae9a5 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -280,14 +280,26 @@ struct device; { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_volsw, \ .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \ - .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } +#define SOC_DAPM_SINGLE_AUTODISABLE(xname, reg, shift, max, invert) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, \ + .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 1) } #define SOC_DAPM_SINGLE_TLV(xname, reg, shift, max, invert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_volsw, \ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE,\ .tlv.p = (tlv_array), \ .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \ - .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } +#define SOC_DAPM_SINGLE_TLV_AUTODISABLE(xname, reg, shift, max, invert, tlv_array) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ + .info = snd_soc_info_volsw, \ + .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | SNDRV_CTL_ELEM_ACCESS_READWRITE,\ + .tlv.p = (tlv_array), \ + .get = snd_soc_dapm_get_volsw, .put = snd_soc_dapm_put_volsw, \ + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } #define SOC_DAPM_ENUM(xname, xenum) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_enum_double, \ @@ -484,6 +496,7 @@ enum snd_soc_dapm_type { snd_soc_dapm_dai_in, /* link to DAI structure */ snd_soc_dapm_dai_out, snd_soc_dapm_dai_link, /* link between two DAI structures */ + snd_soc_dapm_kcontrol, /* Auto-disabled kcontrol */ }; enum snd_soc_dapm_subclass { diff --git a/include/sound/soc.h b/include/sound/soc.h index b1e1f967ae1e..6201c6ede8ba 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -30,13 +30,13 @@ /* * Convenience kcontrol builders */ -#define SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, xmax, xinvert) \ +#define SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, xmax, xinvert, xautodisable) \ ((unsigned long)&(struct soc_mixer_control) \ {.reg = xreg, .rreg = xreg, .shift = shift_left, \ .rshift = shift_right, .max = xmax, .platform_max = xmax, \ - .invert = xinvert}) -#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) \ - SOC_DOUBLE_VALUE(xreg, xshift, xshift, xmax, xinvert) + .invert = xinvert, .autodisable = xautodisable}) +#define SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert, xautodisable) \ + SOC_DOUBLE_VALUE(xreg, xshift, xshift, xmax, xinvert, xautodisable) #define SOC_SINGLE_VALUE_EXT(xreg, xmax, xinvert) \ ((unsigned long)&(struct soc_mixer_control) \ {.reg = xreg, .max = xmax, .platform_max = xmax, .invert = xinvert}) @@ -52,7 +52,7 @@ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\ .put = snd_soc_put_volsw, \ - .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } #define SOC_SINGLE_RANGE(xname, xreg, xshift, xmin, xmax, xinvert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ .info = snd_soc_info_volsw_range, .get = snd_soc_get_volsw_range, \ @@ -68,7 +68,7 @@ .tlv.p = (tlv_array), \ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw,\ .put = snd_soc_put_volsw, \ - .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert) } + .private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) } #define SOC_SINGLE_SX_TLV(xname, xreg, xshift, xmin, xmax, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ | \ @@ -97,7 +97,7 @@ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \ .put = snd_soc_put_volsw, \ .private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \ - max, invert) } + max, invert, 0) } #define SOC_DOUBLE_R(xname, reg_left, reg_right, xshift, xmax, xinvert) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ .info = snd_soc_info_volsw, \ @@ -119,7 +119,7 @@ .info = snd_soc_info_volsw, .get = snd_soc_get_volsw, \ .put = snd_soc_put_volsw, \ .private_value = SOC_DOUBLE_VALUE(reg, shift_left, shift_right, \ - max, invert) } + max, invert, 0) } #define SOC_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\ @@ -190,14 +190,14 @@ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ .info = snd_soc_info_volsw, \ .get = xhandler_get, .put = xhandler_put, \ - .private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) } + .private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert, 0) } #define SOC_DOUBLE_EXT(xname, reg, shift_left, shift_right, max, invert,\ xhandler_get, xhandler_put) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\ .info = snd_soc_info_volsw, \ .get = xhandler_get, .put = xhandler_put, \ .private_value = \ - SOC_DOUBLE_VALUE(reg, shift_left, shift_right, max, invert) } + SOC_DOUBLE_VALUE(reg, shift_left, shift_right, max, invert, 0) } #define SOC_SINGLE_EXT_TLV(xname, xreg, xshift, xmax, xinvert,\ xhandler_get, xhandler_put, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ @@ -206,7 +206,7 @@ .tlv.p = (tlv_array), \ .info = snd_soc_info_volsw, \ .get = xhandler_get, .put = xhandler_put, \ - .private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert) } + .private_value = SOC_SINGLE_VALUE(xreg, xshift, xmax, xinvert, 0) } #define SOC_DOUBLE_EXT_TLV(xname, xreg, shift_left, shift_right, xmax, xinvert,\ xhandler_get, xhandler_put, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ @@ -216,7 +216,7 @@ .info = snd_soc_info_volsw, \ .get = xhandler_get, .put = xhandler_put, \ .private_value = SOC_DOUBLE_VALUE(xreg, shift_left, shift_right, \ - xmax, xinvert) } + xmax, xinvert, 0) } #define SOC_DOUBLE_R_EXT_TLV(xname, reg_left, reg_right, xshift, xmax, xinvert,\ xhandler_get, xhandler_put, tlv_array) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \ @@ -1088,7 +1088,9 @@ struct snd_soc_pcm_runtime { /* mixer control */ struct soc_mixer_control { int min, max, platform_max; - unsigned int reg, rreg, shift, rshift, invert; + unsigned int reg, rreg, shift, rshift; + unsigned int invert:1; + unsigned int autodisable:1; }; struct soc_bytes { -- cgit From 4b4dab82340d969521f4f86108441cb597c8595d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 28 Jul 2013 18:58:29 -0700 Subject: ASoC: rsnd: remove platform dai and add dai_id on platform setting Current rsnd driver is using struct rsnd_dai_platform_info so that indicate sound DAI information (playback/capture SSI ID). But, SSI settings were also required separately. Thus, platform settings was very un-understandable. This patch adds dai_id to SSI settings, and removed rsnd_dai_platform_info. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h index 99d8dd029906..33233edd1664 100644 --- a/include/sound/rcar_snd.h +++ b/include/sound/rcar_snd.h @@ -28,15 +28,24 @@ /* * flags * - * 0xA0000000 + * 0xAB000000 * * A : clock sharing settings + * B : SSI direction */ #define RSND_SSI_CLK_PIN_SHARE (1 << 31) #define RSND_SSI_CLK_FROM_ADG (1 << 30) /* clock parent is master */ #define RSND_SSI_SYNC (1 << 29) /* SSI34_sync etc */ +#define RSND_SSI_PLAY (1 << 24) + +#define RSND_SSI_SET(_dai_id, _pio_irq, _flags) \ +{ .dai_id = _dai_id, .pio_irq = _pio_irq, .flags = _flags } +#define RSND_SSI_UNUSED \ +{ .dai_id = -1, .pio_irq = -1, .flags = 0 } + struct rsnd_ssi_platform_info { + int dai_id; int pio_irq; u32 flags; }; @@ -45,11 +54,6 @@ struct rsnd_scu_platform_info { u32 flags; }; -struct rsnd_dai_platform_info { - int ssi_id_playback; - int ssi_id_capture; -}; - /* * flags * @@ -66,8 +70,6 @@ struct rcar_snd_info { int ssi_info_nr; struct rsnd_scu_platform_info *scu_info; int scu_info_nr; - struct rsnd_dai_platform_info *dai_info; - int dai_info_nr; int (*start)(int id); int (*stop)(int id); }; -- cgit From 849fc82a6f4f32b4c8c502bb7c4a68df51170232 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 28 Jul 2013 18:59:02 -0700 Subject: ASoC: rsnd: SSI supports DMA transfer This patch adds DMAEngine transfer on SSI. But, it transfers sound data from memory to SSI directly without using HPBIF at this time. It will be updated soon Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h index 33233edd1664..a72687dda0cd 100644 --- a/include/sound/rcar_snd.h +++ b/include/sound/rcar_snd.h @@ -39,13 +39,14 @@ #define RSND_SSI_PLAY (1 << 24) -#define RSND_SSI_SET(_dai_id, _pio_irq, _flags) \ -{ .dai_id = _dai_id, .pio_irq = _pio_irq, .flags = _flags } +#define RSND_SSI_SET(_dai_id, _dma_id, _pio_irq, _flags) \ +{ .dai_id = _dai_id, .dma_id = _dma_id, .pio_irq = _pio_irq, .flags = _flags } #define RSND_SSI_UNUSED \ -{ .dai_id = -1, .pio_irq = -1, .flags = 0 } +{ .dai_id = -1, .dma_id = -1, .pio_irq = -1, .flags = 0 } struct rsnd_ssi_platform_info { int dai_id; + int dma_id; int pio_irq; u32 flags; }; -- cgit From 374a528111fa07878090bd9694a3e153814de39c Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 28 Jul 2013 18:59:12 -0700 Subject: ASoC: rsnd: SSI supports DMA transfer via BUSIF This patch adds BUSIF support for R-Car sound DMAEngine transfer. The sound data will be transferred via FIFO which can cover blank time which will happen when DMA channel is switching. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- include/sound/rcar_snd.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include') diff --git a/include/sound/rcar_snd.h b/include/sound/rcar_snd.h index a72687dda0cd..d35412ae03b3 100644 --- a/include/sound/rcar_snd.h +++ b/include/sound/rcar_snd.h @@ -36,6 +36,7 @@ #define RSND_SSI_CLK_PIN_SHARE (1 << 31) #define RSND_SSI_CLK_FROM_ADG (1 << 30) /* clock parent is master */ #define RSND_SSI_SYNC (1 << 29) /* SSI34_sync etc */ +#define RSND_SSI_DEPENDENT (1 << 28) /* SSI needs SRU/SCU */ #define RSND_SSI_PLAY (1 << 24) @@ -51,6 +52,11 @@ struct rsnd_ssi_platform_info { u32 flags; }; +/* + * flags + */ +#define RSND_SCU_USB_HPBIF (1 << 31) /* it needs RSND_SSI_DEPENDENT */ + struct rsnd_scu_platform_info { u32 flags; }; -- cgit From c77f872e663e3f6ea18f774bf4399884884b4b22 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 10 Aug 2013 21:33:09 +0200 Subject: ASoC: Remove unused snd_soc_info_volsw_ext() The SOC_SINGLE_EXT control has been using snd_soc_info_volsw() for its info callback since commit 1c433fb ("[ALSA] soc - 0.13 ASoC headers"). The snd_soc_info_volsw_ext() function has been unused ever since then, so remove it. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index 6eabee7ec15a..724a42af40fa 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -497,8 +497,6 @@ int snd_soc_put_value_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_info_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); -int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo); #define snd_soc_info_bool_ext snd_ctl_boolean_mono_info int snd_soc_get_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); -- cgit From 9a953e6f27fd280a2af5719b77394fbb228c5b46 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Sat, 10 Aug 2013 21:33:10 +0200 Subject: ASoC: Use snd_soc_info_enum_double() for SOC_ENUM_EXT controls snd_soc_info_enum_ext() and snd_soc_info_enum_double() are almost identical. The only difference is that snd_soc_info_enum_double() is also able to handle stereo controls. Using snd_soc_info_enum double() instead of snd_soc_info_enum_ext() for the SOC_ENUM_EXT control's info callback allows us to remove snd_soc_info_enum_ext(). Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- include/sound/soc.h | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index 724a42af40fa..6f86a4187f58 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -234,7 +234,7 @@ .private_value = xdata } #define SOC_ENUM_EXT(xname, xenum, xhandler_get, xhandler_put) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \ - .info = snd_soc_info_enum_ext, \ + .info = snd_soc_info_enum_double, \ .get = xhandler_get, .put = xhandler_put, \ .private_value = (unsigned long)&xenum } @@ -485,8 +485,6 @@ int snd_soc_add_dai_controls(struct snd_soc_dai *dai, const struct snd_kcontrol_new *controls, int num_controls); int snd_soc_info_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo); -int snd_soc_info_enum_ext(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo); int snd_soc_get_enum_double(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol); int snd_soc_put_enum_double(struct snd_kcontrol *kcontrol, -- cgit From 4ca0c0d4784fa82d68733f7793e3487023e12282 Mon Sep 17 00:00:00 2001 From: Padmavathi Venna Date: Mon, 12 Aug 2013 15:19:52 +0530 Subject: ASoC: Samsung: I2S: Modify the I2S driver to support I2S on Exynos5420 Exynos5420 added support for I2S TDM mode. For this, there are some register changes in the I2S controller. This patch adds the relevant register changes to support I2S in normal mode. This patch adds a quirk for TDM mode and if TDM mode is present all the relevent changes will be applied. Signed-off-by: Padmavathi Venna Reviewed-by: Tomasz Figa Signed-off-by: Mark Brown --- include/linux/platform_data/asoc-s3c.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include') diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h index 88272591a895..9efc04dd255a 100644 --- a/include/linux/platform_data/asoc-s3c.h +++ b/include/linux/platform_data/asoc-s3c.h @@ -36,6 +36,7 @@ struct samsung_i2s { */ #define QUIRK_NO_MUXPSR (1 << 2) #define QUIRK_NEED_RSTCLR (1 << 3) +#define QUIRK_SUPPORTS_TDM (1 << 4) /* Quirks of the I2S controller */ u32 quirks; dma_addr_t idma_addr; -- cgit From 6446221c14ef3bf58754cf1948631128dbe62700 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 12 Aug 2013 10:37:18 +0200 Subject: ARM: pxa: ssp: add pxa_ssp_request_of() Add a function to lookup ssp devices from device tree. This way, users can reference the ssp devices in order to register to them. Signed-off-by: Daniel Mack Acked-by: Haojian Zhuang Signed-off-by: Mark Brown --- include/linux/pxa2xx_ssp.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include') diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h index 467cc6307b62..49444203328a 100644 --- a/include/linux/pxa2xx_ssp.h +++ b/include/linux/pxa2xx_ssp.h @@ -21,6 +21,8 @@ #include #include +#include + /* * SSP Serial Port Registers @@ -190,6 +192,8 @@ struct ssp_device { int irq; int drcmr_rx; int drcmr_tx; + + struct device_node *of_node; }; /** @@ -218,11 +222,18 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg) #ifdef CONFIG_ARCH_PXA struct ssp_device *pxa_ssp_request(int port, const char *label); void pxa_ssp_free(struct ssp_device *); +struct ssp_device *pxa_ssp_request_of(const struct device_node *of_node, + const char *label); #else static inline struct ssp_device *pxa_ssp_request(int port, const char *label) { return NULL; } +static inline struct ssp_device *pxa_ssp_request_of(const struct device_node *n, + const char *name) +{ + return NULL; +} static inline void pxa_ssp_free(struct ssp_device *ssp) {} #endif -- cgit From d65a14587a9be853a887a1407db133df1fb68e29 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Mon, 12 Aug 2013 10:42:39 +0200 Subject: ASoC: pxa: use snd_dmaengine_dai_dma_data Use snd_dmaengine_dai_dma_data for passing the dma parameters from clients to the pxa pcm lib. This does no functional change, it's just an intermedia step to migrate the pxa bits over to dmaengine. The calculation of dcmd is a transition hack which will be removed again in a later patch. It's just there to make the transition more readable. Signed-off-by: Daniel Mack Acked-by: Mark Brown Signed-off-by: Mark Brown --- include/sound/pxa2xx-lib.h | 7 ------- 1 file changed, 7 deletions(-) (limited to 'include') diff --git a/include/sound/pxa2xx-lib.h b/include/sound/pxa2xx-lib.h index 2fd3d251d9a5..56e818e4a1cb 100644 --- a/include/sound/pxa2xx-lib.h +++ b/include/sound/pxa2xx-lib.h @@ -6,13 +6,6 @@ /* PCM */ -struct pxa2xx_pcm_dma_params { - char *name; /* stream identifier */ - u32 dcmd; /* DMA descriptor dcmd field */ - volatile u32 *drcmr; /* the DMA request channel to use */ - u32 dev_addr; /* device physical address for DMA */ -}; - extern int __pxa2xx_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params); extern int __pxa2xx_pcm_hw_free(struct snd_pcm_substream *substream); -- cgit From 74b77b1510c90787d4e2e3a8412b85b235590ba5 Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Fri, 16 Aug 2013 11:45:33 +0200 Subject: ASoC: imx-audmux: Move definitions to dt-bindings Move imx-audmux macro definitions to include/dt-bindings, so they can be used for devicetree. Signed-off-by: Markus Pargmann Signed-off-by: Mark Brown --- include/dt-bindings/sound/fsl-imx-audmux.h | 56 ++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 include/dt-bindings/sound/fsl-imx-audmux.h (limited to 'include') diff --git a/include/dt-bindings/sound/fsl-imx-audmux.h b/include/dt-bindings/sound/fsl-imx-audmux.h new file mode 100644 index 000000000000..50b09e96f247 --- /dev/null +++ b/include/dt-bindings/sound/fsl-imx-audmux.h @@ -0,0 +1,56 @@ +#ifndef __DT_FSL_IMX_AUDMUX_H +#define __DT_FSL_IMX_AUDMUX_H + +#define MX27_AUDMUX_HPCR1_SSI0 0 +#define MX27_AUDMUX_HPCR2_SSI1 1 +#define MX27_AUDMUX_HPCR3_SSI_PINS_4 2 +#define MX27_AUDMUX_PPCR1_SSI_PINS_1 3 +#define MX27_AUDMUX_PPCR2_SSI_PINS_2 4 +#define MX27_AUDMUX_PPCR3_SSI_PINS_3 5 + +#define MX31_AUDMUX_PORT1_SSI0 0 +#define MX31_AUDMUX_PORT2_SSI1 1 +#define MX31_AUDMUX_PORT3_SSI_PINS_3 2 +#define MX31_AUDMUX_PORT4_SSI_PINS_4 3 +#define MX31_AUDMUX_PORT5_SSI_PINS_5 4 +#define MX31_AUDMUX_PORT6_SSI_PINS_6 5 +#define MX31_AUDMUX_PORT7_SSI_PINS_7 6 + +#define MX51_AUDMUX_PORT1_SSI0 0 +#define MX51_AUDMUX_PORT2_SSI1 1 +#define MX51_AUDMUX_PORT3 2 +#define MX51_AUDMUX_PORT4 3 +#define MX51_AUDMUX_PORT5 4 +#define MX51_AUDMUX_PORT6 5 +#define MX51_AUDMUX_PORT7 6 + +/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */ +#define IMX_AUDMUX_V1_PCR_INMMASK(x) ((x) & 0xff) +#define IMX_AUDMUX_V1_PCR_INMEN (1 << 8) +#define IMX_AUDMUX_V1_PCR_TXRXEN (1 << 10) +#define IMX_AUDMUX_V1_PCR_SYN (1 << 12) +#define IMX_AUDMUX_V1_PCR_RXDSEL(x) (((x) & 0x7) << 13) +#define IMX_AUDMUX_V1_PCR_RFCSEL(x) (((x) & 0xf) << 20) +#define IMX_AUDMUX_V1_PCR_RCLKDIR (1 << 24) +#define IMX_AUDMUX_V1_PCR_RFSDIR (1 << 25) +#define IMX_AUDMUX_V1_PCR_TFCSEL(x) (((x) & 0xf) << 26) +#define IMX_AUDMUX_V1_PCR_TCLKDIR (1 << 30) +#define IMX_AUDMUX_V1_PCR_TFSDIR (1 << 31) + +/* Register definitions for the i.MX25/31/35/51 Digital Audio Multiplexer */ +#define IMX_AUDMUX_V2_PTCR_TFSDIR (1 << 31) +#define IMX_AUDMUX_V2_PTCR_TFSEL(x) (((x) & 0xf) << 27) +#define IMX_AUDMUX_V2_PTCR_TCLKDIR (1 << 26) +#define IMX_AUDMUX_V2_PTCR_TCSEL(x) (((x) & 0xf) << 22) +#define IMX_AUDMUX_V2_PTCR_RFSDIR (1 << 21) +#define IMX_AUDMUX_V2_PTCR_RFSEL(x) (((x) & 0xf) << 17) +#define IMX_AUDMUX_V2_PTCR_RCLKDIR (1 << 16) +#define IMX_AUDMUX_V2_PTCR_RCSEL(x) (((x) & 0xf) << 12) +#define IMX_AUDMUX_V2_PTCR_SYN (1 << 11) + +#define IMX_AUDMUX_V2_PDCR_RXDSEL(x) (((x) & 0x7) << 13) +#define IMX_AUDMUX_V2_PDCR_TXRXEN (1 << 12) +#define IMX_AUDMUX_V2_PDCR_MODE(x) (((x) & 0x3) << 8) +#define IMX_AUDMUX_V2_PDCR_INMMASK(x) ((x) & 0xff) + +#endif /* __DT_FSL_IMX_AUDMUX_H */ -- cgit From 741a509f34d8d702f70d0ad99b8152c57d76961e Mon Sep 17 00:00:00 2001 From: Markus Pargmann Date: Mon, 19 Aug 2013 17:05:55 +0200 Subject: ASoC: core: Generic ac97 link reset functions This patch adds generic ac97 reset functions using pincontrol and gpio parsed from devicetree. Signed-off-by: Markus Pargmann Signed-off-by: Mark Brown --- include/sound/soc.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include') diff --git a/include/sound/soc.h b/include/sound/soc.h index 6eabee7ec15a..c0ac3bc7b7f4 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -468,6 +468,8 @@ int snd_soc_new_ac97_codec(struct snd_soc_codec *codec, void snd_soc_free_ac97_codec(struct snd_soc_codec *codec); int snd_soc_set_ac97_ops(struct snd_ac97_bus_ops *ops); +int snd_soc_set_ac97_ops_of_reset(struct snd_ac97_bus_ops *ops, + struct platform_device *pdev); /* *Controls -- cgit