From e55c884ea5c66a29a713d41ed0819fee8038762b Mon Sep 17 00:00:00 2001 From: Sean Young Date: Tue, 16 Oct 2018 15:09:31 +0100 Subject: media: rc: self test for IR encoders and decoders ir-loopback can transmit IR on one rc device and check the correct scancode and protocol is decoded on a different rc device. This can be used to check IR transmission between two rc devices. Using rc-loopback, we use it to check the IR encoders and decoders themselves. No hardware is required for this test. Signed-off-by: Sean Young Cc: Shuah Khan Signed-off-by: Shuah Khan --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/ir/.gitignore | 1 + tools/testing/selftests/ir/Makefile | 5 + tools/testing/selftests/ir/ir_loopback.c | 199 ++++++++++++++++++++++++++++++ tools/testing/selftests/ir/ir_loopback.sh | 20 +++ 5 files changed, 226 insertions(+) create mode 100644 tools/testing/selftests/ir/.gitignore create mode 100644 tools/testing/selftests/ir/Makefile create mode 100644 tools/testing/selftests/ir/ir_loopback.c create mode 100755 tools/testing/selftests/ir/ir_loopback.sh (limited to 'tools') diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index f1fe492c8e17..995034ea5546 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -15,6 +15,7 @@ TARGETS += futex TARGETS += gpio TARGETS += intel_pstate TARGETS += ipc +TARGETS += ir TARGETS += kcmp TARGETS += kvm TARGETS += lib diff --git a/tools/testing/selftests/ir/.gitignore b/tools/testing/selftests/ir/.gitignore new file mode 100644 index 000000000000..070ea0c75fb8 --- /dev/null +++ b/tools/testing/selftests/ir/.gitignore @@ -0,0 +1 @@ +ir_loopback diff --git a/tools/testing/selftests/ir/Makefile b/tools/testing/selftests/ir/Makefile new file mode 100644 index 000000000000..f4ba8eb84b95 --- /dev/null +++ b/tools/testing/selftests/ir/Makefile @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 +TEST_PROGS := ir_loopback.sh +TEST_GEN_PROGS_EXTENDED := ir_loopback + +include ../lib.mk diff --git a/tools/testing/selftests/ir/ir_loopback.c b/tools/testing/selftests/ir/ir_loopback.c new file mode 100644 index 000000000000..858c19caf224 --- /dev/null +++ b/tools/testing/selftests/ir/ir_loopback.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0 +// test ir decoder +// +// Copyright (C) 2018 Sean Young + +// When sending LIRC_MODE_SCANCODE, the IR will be encoded. rc-loopback +// will send this IR to the receiver side, where we try to read the decoded +// IR. Decoding happens in a separate kernel thread, so we will need to +// wait until that is scheduled, hence we use poll to check for read +// readiness. + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../kselftest.h" + +#define TEST_SCANCODES 10 +#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0])) + +static const struct { + enum rc_proto proto; + const char *name; + unsigned int mask; + const char *decoder; +} protocols[] = { + { RC_PROTO_RC5, "rc-5", 0x1f7f, "rc-5" }, + { RC_PROTO_RC5X_20, "rc-5x-20", 0x1f7f3f, "rc-5" }, + { RC_PROTO_RC5_SZ, "rc-5-sz", 0x2fff, "rc-5-sz" }, + { RC_PROTO_JVC, "jvc", 0xffff, "jvc" }, + { RC_PROTO_SONY12, "sony-12", 0x1f007f, "sony" }, + { RC_PROTO_SONY15, "sony-15", 0xff007f, "sony" }, + { RC_PROTO_SONY20, "sony-20", 0x1fff7f, "sony" }, + { RC_PROTO_NEC, "nec", 0xffff, "nec" }, + { RC_PROTO_NECX, "nec-x", 0xffffff, "nec" }, + { RC_PROTO_NEC32, "nec-32", 0xffffffff, "nec" }, + { RC_PROTO_SANYO, "sanyo", 0x1fffff, "sanyo" }, + { RC_PROTO_RC6_0, "rc-6-0", 0xffff, "rc-6" }, + { RC_PROTO_RC6_6A_20, "rc-6-6a-20", 0xfffff, "rc-6" }, + { RC_PROTO_RC6_6A_24, "rc-6-6a-24", 0xffffff, "rc-6" }, + { RC_PROTO_RC6_6A_32, "rc-6-6a-32", 0xffffffff, "rc-6" }, + { RC_PROTO_RC6_MCE, "rc-6-mce", 0x00007fff, "rc-6" }, + { RC_PROTO_SHARP, "sharp", 0x1fff, "sharp" }, +}; + +int lirc_open(const char *rc) +{ + struct dirent *dent; + char buf[100]; + DIR *d; + int fd; + + snprintf(buf, sizeof(buf), "/sys/class/rc/%s", rc); + + d = opendir(buf); + if (!d) + ksft_exit_fail_msg("cannot open %s: %m\n", buf); + + while ((dent = readdir(d)) != NULL) { + if (!strncmp(dent->d_name, "lirc", 4)) { + snprintf(buf, sizeof(buf), "/dev/%s", dent->d_name); + break; + } + } + + if (!dent) + ksft_exit_fail_msg("cannot find lirc device for %s\n", rc); + + closedir(d); + + fd = open(buf, O_RDWR | O_NONBLOCK); + if (fd == -1) + ksft_exit_fail_msg("cannot open: %s: %m\n", buf); + + return fd; +} + +int main(int argc, char **argv) +{ + unsigned int mode; + char buf[100]; + int rlircfd, wlircfd, protocolfd, i, n; + + srand(time(NULL)); + + if (argc != 3) + ksft_exit_fail_msg("Usage: %s \n", + argv[0]); + + rlircfd = lirc_open(argv[2]); + mode = LIRC_MODE_SCANCODE; + if (ioctl(rlircfd, LIRC_SET_REC_MODE, &mode)) + ksft_exit_fail_msg("failed to set scancode rec mode %s: %m\n", + argv[2]); + + wlircfd = lirc_open(argv[1]); + if (ioctl(wlircfd, LIRC_SET_SEND_MODE, &mode)) + ksft_exit_fail_msg("failed to set scancode send mode %s: %m\n", + argv[1]); + + snprintf(buf, sizeof(buf), "/sys/class/rc/%s/protocols", argv[2]); + protocolfd = open(buf, O_WRONLY); + if (protocolfd == -1) + ksft_exit_fail_msg("failed to open %s: %m\n", buf); + + printf("Sending IR on %s and receiving IR on %s.\n", argv[1], argv[2]); + + for (i = 0; i < ARRAY_SIZE(protocols); i++) { + if (write(protocolfd, protocols[i].decoder, + strlen(protocols[i].decoder)) == -1) + ksft_exit_fail_msg("failed to set write decoder\n"); + + printf("Testing protocol %s for decoder %s (%d/%d)...\n", + protocols[i].name, protocols[i].decoder, + i + 1, (int)ARRAY_SIZE(protocols)); + + for (n = 0; n < TEST_SCANCODES; n++) { + unsigned int scancode = rand() & protocols[i].mask; + unsigned int rc_proto = protocols[i].proto; + + if (rc_proto == RC_PROTO_RC6_MCE) + scancode |= 0x800f0000; + + if (rc_proto == RC_PROTO_NECX && + (((scancode >> 16) ^ ~(scancode >> 8)) & 0xff) == 0) + continue; + + if (rc_proto == RC_PROTO_NEC32 && + (((scancode >> 8) ^ ~scancode) & 0xff) == 0) + continue; + + struct lirc_scancode lsc = { + .rc_proto = rc_proto, + .scancode = scancode + }; + + printf("Testing scancode:%x\n", scancode); + + while (write(wlircfd, &lsc, sizeof(lsc)) < 0) { + if (errno == EINTR) + continue; + + ksft_exit_fail_msg("failed to send ir: %m\n"); + } + + struct pollfd pfd = { .fd = rlircfd, .events = POLLIN }; + struct lirc_scancode lsc2; + + poll(&pfd, 1, 1000); + + bool decoded = true; + + while (read(rlircfd, &lsc2, sizeof(lsc2)) < 0) { + if (errno == EINTR) + continue; + + ksft_test_result_error("no scancode decoded: %m\n"); + decoded = false; + break; + } + + if (!decoded) + continue; + + if (lsc.rc_proto != lsc2.rc_proto) + ksft_test_result_error("decoded protocol is different: %d\n", + lsc2.rc_proto); + + else if (lsc.scancode != lsc2.scancode) + ksft_test_result_error("decoded scancode is different: %llx\n", + lsc2.scancode); + else + ksft_inc_pass_cnt(); + } + + printf("OK\n"); + } + + close(rlircfd); + close(wlircfd); + close(protocolfd); + + if (ksft_get_fail_cnt() > 0) + ksft_exit_fail(); + else + ksft_exit_pass(); + + return 0; +} diff --git a/tools/testing/selftests/ir/ir_loopback.sh b/tools/testing/selftests/ir/ir_loopback.sh new file mode 100755 index 000000000000..0a0b8dfa39be --- /dev/null +++ b/tools/testing/selftests/ir/ir_loopback.sh @@ -0,0 +1,20 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +if ! /sbin/modprobe -q -n rc-loopback; then + echo "ir_loopback: module rc-loopback is not found [SKIP]" + exit $ksft_skip +fi + +/sbin/modprobe rc-loopback +if [ $? -ne 0 ]; then + exit +fi + +RCDEV=$(grep -l DRV_NAME=rc-loopback /sys/class/rc/rc*/uevent | grep -o 'rc[0-9]\+') + +./ir_loopback $RCDEV $RCDEV +exit -- cgit From f70b472e937bb659a7b7a14e64f07308e230888c Mon Sep 17 00:00:00 2001 From: Dan Rue Date: Mon, 26 Nov 2018 21:12:15 -0600 Subject: selftests: firmware: remove use of non-standard diff -Z option "diff -Z" is used to trim the trailing whitespace when comparing the loaded firmware file with the source firmware file. However, per the comment in the source code, -Z should not be necessary. In testing, the input and output files are identical. Additionally, -Z is not a standard option and is not available in environments such as busybox. When -Z is not supported, diff fails with a usage error, which is suppressed, but then causes read_firmwares() to exit with a false failure message. Signed-off-by: Dan Rue Acked-by: Kees Cook Signed-off-by: Shuah Khan --- tools/testing/selftests/firmware/fw_filesystem.sh | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh index a4320c4b44dc..466cf2f91ba0 100755 --- a/tools/testing/selftests/firmware/fw_filesystem.sh +++ b/tools/testing/selftests/firmware/fw_filesystem.sh @@ -155,11 +155,8 @@ read_firmwares() { for i in $(seq 0 3); do config_set_read_fw_idx $i - # Verify the contents are what we expect. - # -Z required for now -- check for yourself, md5sum - # on $FW and DIR/read_firmware will yield the same. Even - # cmp agrees, so something is off. - if ! diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then + # Verify the contents match + if ! diff -q "$FW" $DIR/read_firmware 2>/dev/null ; then echo "request #$i: firmware was not loaded" >&2 exit 1 fi @@ -171,7 +168,7 @@ read_firmwares_expect_nofile() for i in $(seq 0 3); do config_set_read_fw_idx $i # Ensures contents differ - if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then + if diff -q "$FW" $DIR/read_firmware 2>/dev/null ; then echo "request $i: file was not expected to match" >&2 exit 1 fi -- cgit From 7492902e8d22b568463897fa967c0886764cf034 Mon Sep 17 00:00:00 2001 From: Dan Rue Date: Mon, 26 Nov 2018 21:12:16 -0600 Subject: selftests: firmware: add CONFIG_FW_LOADER_USER_HELPER_FALLBACK to config CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y is required for fw_fallback.sh. Without it, fw_fallback.sh fails with 'usermode helper disabled so ignoring test'. Enable the config in selftest so that it gets built by default. Signed-off-by: Dan Rue Acked-by: Kees Cook Signed-off-by: Shuah Khan --- tools/testing/selftests/firmware/config | 1 + 1 file changed, 1 insertion(+) (limited to 'tools') diff --git a/tools/testing/selftests/firmware/config b/tools/testing/selftests/firmware/config index bf634dda0720..913a25a4a32b 100644 --- a/tools/testing/selftests/firmware/config +++ b/tools/testing/selftests/firmware/config @@ -1,5 +1,6 @@ CONFIG_TEST_FIRMWARE=y CONFIG_FW_LOADER=y CONFIG_FW_LOADER_USER_HELPER=y +CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -- cgit From 694f1f926c725a8955c1c156ad6d3c4e1b853bd8 Mon Sep 17 00:00:00 2001 From: Daniel Díaz Date: Tue, 16 Oct 2018 16:46:59 -0500 Subject: selftests: gpio: Find libmount with pkg-config if available MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If pkg-config is available, use it to define the CFLAGS and LDLIBS needed for libmount; else, use the current hard-coded paths and options. Using pkg-config is very helpful for cross-compilation environments, and is sometimes readily available on developer boxes to ensure we get the right compiler/linker options for the given package. Signed-off-by: Daniel Díaz Signed-off-by: Shuah Khan --- tools/testing/selftests/gpio/Makefile | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile index 46648427d537..f22b22aef7bf 100644 --- a/tools/testing/selftests/gpio/Makefile +++ b/tools/testing/selftests/gpio/Makefile @@ -1,7 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 -CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ -LDLIBS += -lmount -I/usr/include/libmount +MOUNT_CFLAGS := $(shell pkg-config --cflags mount 2>/dev/null) +MOUNT_LDLIBS := $(shell pkg-config --libs mount 2>/dev/null) +ifeq ($(MOUNT_LDLIBS),) +MOUNT_LDLIBS := -lmount -I/usr/include/libmount +endif + +CFLAGS += -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ $(MOUNT_CFLAGS) +LDLIBS += $(MOUNT_LDLIBS) TEST_PROGS := gpio-mockup.sh TEST_FILES := gpio-mockup-sysfs.sh -- cgit From 1d956785da5585635eb7e266239729da6bc73e69 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 12 Nov 2018 11:11:18 -0800 Subject: selftests/ftrace: Fix invalid SPDX identifiers While GPL2.0 looks about right, the correct and valid identifiers for GPL v2 only code are 'GPL-2.0' or 'GPL-2.0-only'. Signed-off-by: Thomas Gleixner Cc: Masami Hiramatsu Cc: Shuah Khan (Samsung OSG) Signed-off-by: Shuah Khan --- tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc | 2 +- tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc | 2 +- tools/testing/selftests/ftrace/test.d/template | 2 +- tools/testing/selftests/ftrace/test.d/tracer/wakeup.tc | 2 +- tools/testing/selftests/ftrace/test.d/tracer/wakeup_rt.tc | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc index bf72e783d014..36fb59f886ea 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func-filter-stacktrace.tc @@ -1,5 +1,5 @@ #!/bin/sh -# SPDX-License-Identifier: GPL2.0 +# SPDX-License-Identifier: GPL-2.0 # description: ftrace - stacktrace filter command # flags: instance diff --git a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc index 0e6810743576..86a1f07ef2ca 100644 --- a/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc +++ b/tools/testing/selftests/ftrace/test.d/ftrace/func_cpumask.tc @@ -1,5 +1,5 @@ #!/bin/sh -# SPDX-License-Identifier: GPL2.0 +# SPDX-License-Identifier: GPL-2.0 # description: ftrace - function trace with cpumask if ! which nproc ; then diff --git a/tools/testing/selftests/ftrace/test.d/template b/tools/testing/selftests/ftrace/test.d/template index 799da7e0b3c9..e1a5d14c4eaf 100644 --- a/tools/testing/selftests/ftrace/test.d/template +++ b/tools/testing/selftests/ftrace/test.d/template @@ -1,5 +1,5 @@ #!/bin/sh -# SPDX-License-Identifier: GPL2.0 +# SPDX-License-Identifier: GPL-2.0 # description: %HERE DESCRIBE WHAT THIS DOES% # you have to add ".tc" extention for your testcase file # Note that all tests are run with "errexit" option. diff --git a/tools/testing/selftests/ftrace/test.d/tracer/wakeup.tc b/tools/testing/selftests/ftrace/test.d/tracer/wakeup.tc index e3005fa785f0..b0893d7edda3 100644 --- a/tools/testing/selftests/ftrace/test.d/tracer/wakeup.tc +++ b/tools/testing/selftests/ftrace/test.d/tracer/wakeup.tc @@ -1,5 +1,5 @@ #!/bin/sh -# SPDX-License-Identifier: GPL2.0 +# SPDX-License-Identifier: GPL-2.0 # description: Test wakeup tracer if ! which chrt ; then diff --git a/tools/testing/selftests/ftrace/test.d/tracer/wakeup_rt.tc b/tools/testing/selftests/ftrace/test.d/tracer/wakeup_rt.tc index f99b5178e00a..b9b6669a623b 100644 --- a/tools/testing/selftests/ftrace/test.d/tracer/wakeup_rt.tc +++ b/tools/testing/selftests/ftrace/test.d/tracer/wakeup_rt.tc @@ -1,5 +1,5 @@ #!/bin/sh -# SPDX-License-Identifier: GPL2.0 +# SPDX-License-Identifier: GPL-2.0 # description: Test wakeup RT tracer if ! which chrt ; then -- cgit From b708a3cc9600390ccaa2b68a88087dd265154b2b Mon Sep 17 00:00:00 2001 From: "Dmitry V. Levin" Date: Mon, 10 Dec 2018 02:00:47 +0300 Subject: selftests: do not macro-expand failed assertion expressions I've stumbled over the current macro-expand behaviour of the test harness: $ gcc -Wall -xc - <<'__EOF__' TEST(macro) { int status = 0; ASSERT_TRUE(WIFSIGNALED(status)); } TEST_HARNESS_MAIN __EOF__ $ ./a.out [==========] Running 1 tests from 1 test cases. [ RUN ] global.macro :4:global.macro:Expected 0 (0) != (((signed char) (((status) & 0x7f) + 1) >> 1) > 0) (0) global.macro: Test terminated by assertion [ FAIL ] global.macro [==========] 0 / 1 tests passed. [ FAILED ] With this change the output of the same test looks much more comprehensible: [==========] Running 1 tests from 1 test cases. [ RUN ] global.macro :4:global.macro:Expected 0 (0) != WIFSIGNALED(status) (0) global.macro: Test terminated by assertion [ FAIL ] global.macro [==========] 0 / 1 tests passed. [ FAILED ] The issue is very similar to the bug fixed in glibc assert(3) three years ago: https://sourceware.org/bugzilla/show_bug.cgi?id=18604 Cc: Shuah Khan Cc: Kees Cook Cc: Andy Lutomirski Cc: Will Drewry Cc: linux-kselftest@vger.kernel.org Signed-off-by: Dmitry V. Levin Acked-by: Kees Cook Signed-off-by: Shuah Khan --- tools/testing/selftests/kselftest_harness.h | 42 ++++++++++++++--------------- 1 file changed, 21 insertions(+), 21 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 6ae3730c4ee3..76d654ef3234 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -354,7 +354,7 @@ * ASSERT_EQ(expected, measured): expected == measured */ #define ASSERT_EQ(expected, seen) \ - __EXPECT(expected, seen, ==, 1) + __EXPECT(expected, #expected, seen, #seen, ==, 1) /** * ASSERT_NE(expected, seen) @@ -365,7 +365,7 @@ * ASSERT_NE(expected, measured): expected != measured */ #define ASSERT_NE(expected, seen) \ - __EXPECT(expected, seen, !=, 1) + __EXPECT(expected, #expected, seen, #seen, !=, 1) /** * ASSERT_LT(expected, seen) @@ -376,7 +376,7 @@ * ASSERT_LT(expected, measured): expected < measured */ #define ASSERT_LT(expected, seen) \ - __EXPECT(expected, seen, <, 1) + __EXPECT(expected, #expected, seen, #seen, <, 1) /** * ASSERT_LE(expected, seen) @@ -387,7 +387,7 @@ * ASSERT_LE(expected, measured): expected <= measured */ #define ASSERT_LE(expected, seen) \ - __EXPECT(expected, seen, <=, 1) + __EXPECT(expected, #expected, seen, #seen, <=, 1) /** * ASSERT_GT(expected, seen) @@ -398,7 +398,7 @@ * ASSERT_GT(expected, measured): expected > measured */ #define ASSERT_GT(expected, seen) \ - __EXPECT(expected, seen, >, 1) + __EXPECT(expected, #expected, seen, #seen, >, 1) /** * ASSERT_GE(expected, seen) @@ -409,7 +409,7 @@ * ASSERT_GE(expected, measured): expected >= measured */ #define ASSERT_GE(expected, seen) \ - __EXPECT(expected, seen, >=, 1) + __EXPECT(expected, #expected, seen, #seen, >=, 1) /** * ASSERT_NULL(seen) @@ -419,7 +419,7 @@ * ASSERT_NULL(measured): NULL == measured */ #define ASSERT_NULL(seen) \ - __EXPECT(NULL, seen, ==, 1) + __EXPECT(NULL, "NULL", seen, #seen, ==, 1) /** * ASSERT_TRUE(seen) @@ -429,7 +429,7 @@ * ASSERT_TRUE(measured): measured != 0 */ #define ASSERT_TRUE(seen) \ - ASSERT_NE(0, seen) + __EXPECT(0, "0", seen, #seen, !=, 1) /** * ASSERT_FALSE(seen) @@ -439,7 +439,7 @@ * ASSERT_FALSE(measured): measured == 0 */ #define ASSERT_FALSE(seen) \ - ASSERT_EQ(0, seen) + __EXPECT(0, "0", seen, #seen, ==, 1) /** * ASSERT_STREQ(expected, seen) @@ -472,7 +472,7 @@ * EXPECT_EQ(expected, measured): expected == measured */ #define EXPECT_EQ(expected, seen) \ - __EXPECT(expected, seen, ==, 0) + __EXPECT(expected, #expected, seen, #seen, ==, 0) /** * EXPECT_NE(expected, seen) @@ -483,7 +483,7 @@ * EXPECT_NE(expected, measured): expected != measured */ #define EXPECT_NE(expected, seen) \ - __EXPECT(expected, seen, !=, 0) + __EXPECT(expected, #expected, seen, #seen, !=, 0) /** * EXPECT_LT(expected, seen) @@ -494,7 +494,7 @@ * EXPECT_LT(expected, measured): expected < measured */ #define EXPECT_LT(expected, seen) \ - __EXPECT(expected, seen, <, 0) + __EXPECT(expected, #expected, seen, #seen, <, 0) /** * EXPECT_LE(expected, seen) @@ -505,7 +505,7 @@ * EXPECT_LE(expected, measured): expected <= measured */ #define EXPECT_LE(expected, seen) \ - __EXPECT(expected, seen, <=, 0) + __EXPECT(expected, #expected, seen, #seen, <=, 0) /** * EXPECT_GT(expected, seen) @@ -516,7 +516,7 @@ * EXPECT_GT(expected, measured): expected > measured */ #define EXPECT_GT(expected, seen) \ - __EXPECT(expected, seen, >, 0) + __EXPECT(expected, #expected, seen, #seen, >, 0) /** * EXPECT_GE(expected, seen) @@ -527,7 +527,7 @@ * EXPECT_GE(expected, measured): expected >= measured */ #define EXPECT_GE(expected, seen) \ - __EXPECT(expected, seen, >=, 0) + __EXPECT(expected, #expected, seen, #seen, >=, 0) /** * EXPECT_NULL(seen) @@ -537,7 +537,7 @@ * EXPECT_NULL(measured): NULL == measured */ #define EXPECT_NULL(seen) \ - __EXPECT(NULL, seen, ==, 0) + __EXPECT(NULL, "NULL", seen, #seen, ==, 0) /** * EXPECT_TRUE(seen) @@ -547,7 +547,7 @@ * EXPECT_TRUE(measured): 0 != measured */ #define EXPECT_TRUE(seen) \ - EXPECT_NE(0, seen) + __EXPECT(0, "0", seen, #seen, !=, 0) /** * EXPECT_FALSE(seen) @@ -557,7 +557,7 @@ * EXPECT_FALSE(measured): 0 == measured */ #define EXPECT_FALSE(seen) \ - EXPECT_EQ(0, seen) + __EXPECT(0, "0", seen, #seen, ==, 0) /** * EXPECT_STREQ(expected, seen) @@ -597,7 +597,7 @@ if (_metadata->passed && _metadata->step < 255) \ _metadata->step++; -#define __EXPECT(_expected, _seen, _t, _assert) do { \ +#define __EXPECT(_expected, _expected_str, _seen, _seen_str, _t, _assert) do { \ /* Avoid multiple evaluation of the cases */ \ __typeof__(_expected) __exp = (_expected); \ __typeof__(_seen) __seen = (_seen); \ @@ -606,8 +606,8 @@ unsigned long long __exp_print = (uintptr_t)__exp; \ unsigned long long __seen_print = (uintptr_t)__seen; \ __TH_LOG("Expected %s (%llu) %s %s (%llu)", \ - #_expected, __exp_print, #_t, \ - #_seen, __seen_print); \ + _expected_str, __exp_print, #_t, \ + _seen_str, __seen_print); \ _metadata->passed = 0; \ /* Ensure the optional handler is triggered */ \ _metadata->trigger = 1; \ -- cgit From 6059c6b1d526d47c0b9f028e106f30ad539dc323 Mon Sep 17 00:00:00 2001 From: Jerry Hoemann Date: Fri, 30 Nov 2018 10:35:41 -0700 Subject: selftests: watchdog: Add gettimeleft command line arg Add command line argument to call and display the results of ioctl WDIOC_GETTIMELEFT. Signed-off-by: Jerry Hoemann Signed-off-by: Shuah Khan --- tools/testing/selftests/watchdog/watchdog-test.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'tools') diff --git a/tools/testing/selftests/watchdog/watchdog-test.c b/tools/testing/selftests/watchdog/watchdog-test.c index c6bd9a68306b..dac907a932ce 100644 --- a/tools/testing/selftests/watchdog/watchdog-test.c +++ b/tools/testing/selftests/watchdog/watchdog-test.c @@ -19,7 +19,7 @@ int fd; const char v = 'V'; -static const char sopts[] = "bdehp:t:Tn:N"; +static const char sopts[] = "bdehp:t:Tn:NL"; static const struct option lopts[] = { {"bootstatus", no_argument, NULL, 'b'}, {"disable", no_argument, NULL, 'd'}, @@ -30,6 +30,7 @@ static const struct option lopts[] = { {"gettimeout", no_argument, NULL, 'T'}, {"pretimeout", required_argument, NULL, 'n'}, {"getpretimeout", no_argument, NULL, 'N'}, + {"gettimeleft", no_argument, NULL, 'L'}, {NULL, no_argument, NULL, 0x0} }; @@ -77,6 +78,7 @@ static void usage(char *progname) printf(" -T, --gettimeout Get the timeout\n"); printf(" -n, --pretimeout=T Set the pretimeout to T seconds\n"); printf(" -N, --getpretimeout Get the pretimeout\n"); + printf(" -L, --gettimeleft Get the time left until timer experies\n"); printf("\n"); printf("Parameters are parsed left-to-right in real-time.\n"); printf("Example: %s -d -t 10 -p 5 -e\n", progname); @@ -180,6 +182,15 @@ int main(int argc, char *argv[]) else printf("WDIOC_GETPRETIMEOUT error '%s'\n", strerror(errno)); break; + case 'L': + oneshot = 1; + ret = ioctl(fd, WDIOC_GETTIMELEFT, &flags); + if (!ret) + printf("WDIOC_GETTIMELEFT returns %u seconds.\n", flags); + else + printf("WDIOC_GETTIMELEFT error '%s'\n", strerror(errno)); + break; + default: usage(argv[0]); goto end; -- cgit From 0ca2923e2a1e1eb3376900e1e3fc74e9b6345ee9 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 13 Dec 2018 09:40:15 +0000 Subject: selftests: watchdog: fix spelling mistake "experies" -> "expires" There is a spelling mistake in the --gettimeleft help text, fix it. Signed-off-by: Colin Ian King Signed-off-by: Shuah Khan --- tools/testing/selftests/watchdog/watchdog-test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools') diff --git a/tools/testing/selftests/watchdog/watchdog-test.c b/tools/testing/selftests/watchdog/watchdog-test.c index dac907a932ce..c2333c78cf04 100644 --- a/tools/testing/selftests/watchdog/watchdog-test.c +++ b/tools/testing/selftests/watchdog/watchdog-test.c @@ -78,7 +78,7 @@ static void usage(char *progname) printf(" -T, --gettimeout Get the timeout\n"); printf(" -n, --pretimeout=T Set the pretimeout to T seconds\n"); printf(" -N, --getpretimeout Get the pretimeout\n"); - printf(" -L, --gettimeleft Get the time left until timer experies\n"); + printf(" -L, --gettimeleft Get the time left until timer expires\n"); printf("\n"); printf("Parameters are parsed left-to-right in real-time.\n"); printf("Example: %s -d -t 10 -p 5 -e\n", progname); -- cgit From 6edf2e3710f4ef2555ad7a2681dbeb4a69092b2d Mon Sep 17 00:00:00 2001 From: Tom Murphy Date: Tue, 27 Nov 2018 10:33:08 +0000 Subject: fix dma-buf/udmabuf selftest This patch fixes the udmabuf selftest. Currently the selftest is broken. I fixed the selftest by setting the F_SEAL_SHRINK seal on the memfd file descriptor which is required by udmabuf and added the test to the selftest Makefile. Signed-off-by: Tom Murphy Reviewed-by: Gerd Hoffmann Signed-off-by: Shuah Khan --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/drivers/dma-buf/Makefile | 2 ++ tools/testing/selftests/drivers/dma-buf/udmabuf.c | 11 +++++++++-- 3 files changed, 12 insertions(+), 2 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 995034ea5546..9ced25e61df7 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -6,6 +6,7 @@ TARGETS += capabilities TARGETS += cgroup TARGETS += cpufreq TARGETS += cpu-hotplug +TARGETS += drivers/dma-buf TARGETS += efivarfs TARGETS += exec TARGETS += filesystems diff --git a/tools/testing/selftests/drivers/dma-buf/Makefile b/tools/testing/selftests/drivers/dma-buf/Makefile index 4154c3d7aa58..f22c3f7cf612 100644 --- a/tools/testing/selftests/drivers/dma-buf/Makefile +++ b/tools/testing/selftests/drivers/dma-buf/Makefile @@ -2,4 +2,6 @@ CFLAGS += -I../../../../../usr/include/ TEST_GEN_PROGS := udmabuf +top_srcdir ?=../../../../.. + include ../../lib.mk diff --git a/tools/testing/selftests/drivers/dma-buf/udmabuf.c b/tools/testing/selftests/drivers/dma-buf/udmabuf.c index 376b1d6730bd..4de902ea14d8 100644 --- a/tools/testing/selftests/drivers/dma-buf/udmabuf.c +++ b/tools/testing/selftests/drivers/dma-buf/udmabuf.c @@ -4,7 +4,7 @@ #include #include #include -#include +#include #include #include @@ -33,12 +33,19 @@ int main(int argc, char *argv[]) exit(77); } - memfd = memfd_create("udmabuf-test", MFD_CLOEXEC); + memfd = memfd_create("udmabuf-test", MFD_ALLOW_SEALING); if (memfd < 0) { printf("%s: [skip,no-memfd]\n", TEST_PREFIX); exit(77); } + ret = fcntl(memfd, F_ADD_SEALS, F_SEAL_SHRINK); + if (ret < 0) { + printf("%s: [skip,fcntl-add-seals]\n", TEST_PREFIX); + exit(77); + } + + size = getpagesize() * NUM_PAGES; ret = ftruncate(memfd, size); if (ret == -1) { -- cgit From 283ac6d5fb2a47f12bcef7806b78acf6ad89907e Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Wed, 12 Dec 2018 20:25:14 -0700 Subject: selftests: Fix test errors related to lib.mk khdr target Commit b2d35fa5fc80 ("selftests: add headers_install to lib.mk") added khdr target to run headers_install target from the main Makefile. The logic uses KSFT_KHDR_INSTALL and top_srcdir as controls to initialize variables and include files to run headers_install from the top level Makefile. There are a few problems with this logic. 1. Exposes top_srcdir to all tests 2. Common logic impacts all tests 3. Uses KSFT_KHDR_INSTALL, top_srcdir, and khdr in an adhoc way. Tests add "khdr" dependency in their Makefiles to TEST_PROGS_EXTENDED in some cases, and STATIC_LIBS in other cases. This makes this framework confusing to use. The common logic that runs for all tests even when KSFT_KHDR_INSTALL isn't defined by the test. top_srcdir is initialized to a default value when test doesn't initialize it. It works for all tests without a sub-dir structure and tests with sub-dir structure fail to build. e.g: make -C sparc64/drivers/ or make -C drivers/dma-buf ../../lib.mk:20: ../../../../scripts/subarch.include: No such file or directory make: *** No rule to make target '../../../../scripts/subarch.include'. Stop. There is no reason to require all tests to define top_srcdir and there is no need to require tests to add khdr dependency using adhoc changes to TEST_* and other variables. Fix it with a consistent use of KSFT_KHDR_INSTALL and top_srcdir from tests that have the dependency on headers_install. Change common logic to include khdr target define and "all" target with dependency on khdr when KSFT_KHDR_INSTALL is defined. Only tests that have dependency on headers_install have to define just the KSFT_KHDR_INSTALL, and top_srcdir variables and there is no need to specify khdr dependency in the test Makefiles. Fixes: b2d35fa5fc80 ("selftests: add headers_install to lib.mk") Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan Reviewed-by: Khalid Aziz Reviewed-by: Anders Roxell Signed-off-by: Shuah Khan --- tools/testing/selftests/android/Makefile | 2 +- tools/testing/selftests/futex/functional/Makefile | 1 + tools/testing/selftests/gpio/Makefile | 6 +++--- tools/testing/selftests/kvm/Makefile | 2 +- tools/testing/selftests/lib.mk | 8 ++++---- tools/testing/selftests/networking/timestamping/Makefile | 1 + tools/testing/selftests/tc-testing/bpf/Makefile | 1 + tools/testing/selftests/vm/Makefile | 1 + 8 files changed, 13 insertions(+), 9 deletions(-) (limited to 'tools') diff --git a/tools/testing/selftests/android/Makefile b/tools/testing/selftests/android/Makefile index d9a725478375..72c25a3cb658 100644 --- a/tools/testing/selftests/android/Makefile +++ b/tools/testing/selftests/android/Makefile @@ -6,7 +6,7 @@ TEST_PROGS := run.sh include ../lib.mk -all: khdr +all: @for DIR in $(SUBDIRS); do \ BUILD_TARGET=$(OUTPUT)/$$DIR; \ mkdir $$BUILD_TARGET -p; \ diff --git a/tools/testing/selftests/futex/functional/Makefile b/tools/testing/selftests/futex/functional/Makefile index ad1eeb14fda7..30996306cabc 100644 --- a/tools/testing/selftests/futex/functional/Makefile +++ b/tools/testing/selftests/futex/functional/Makefile @@ -19,6 +19,7 @@ TEST_GEN_FILES := \ TEST_PROGS := run.sh top_srcdir = ../../../../.. +KSFT_KHDR_INSTALL := 1 include ../../lib.mk $(TEST_GEN_FILES): $(HEADERS) diff --git a/tools/testing/selftests/gpio/Makefile b/tools/testing/selftests/gpio/Makefile index f22b22aef7bf..0bb80619db58 100644 --- a/tools/testing/selftests/gpio/Makefile +++ b/tools/testing/selftests/gpio/Makefile @@ -16,8 +16,6 @@ TEST_PROGS_EXTENDED := gpio-mockup-chardev GPIODIR := $(realpath ../../../gpio) GPIOOBJ := gpio-utils.o -include ../lib.mk - all: $(TEST_PROGS_EXTENDED) override define CLEAN @@ -25,7 +23,9 @@ override define CLEAN $(MAKE) -C $(GPIODIR) OUTPUT=$(GPIODIR)/ clean endef -$(TEST_PROGS_EXTENDED):| khdr +KSFT_KHDR_INSTALL := 1 +include ../lib.mk + $(TEST_PROGS_EXTENDED): $(GPIODIR)/$(GPIOOBJ) $(GPIODIR)/$(GPIOOBJ): diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 01a219229238..52bfe5e76907 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -1,6 +1,7 @@ all: top_srcdir = ../../../.. +KSFT_KHDR_INSTALL := 1 UNAME_M := $(shell uname -m) LIBKVM = lib/assert.c lib/elf.c lib/io.c lib/kvm_util.c lib/ucall.c lib/sparsebit.c @@ -44,7 +45,6 @@ $(OUTPUT)/libkvm.a: $(LIBKVM_OBJ) all: $(STATIC_LIBS) $(TEST_GEN_PROGS): $(STATIC_LIBS) -$(STATIC_LIBS):| khdr cscope: include_paths = $(LINUX_TOOL_INCLUDE) $(LINUX_HDR_PATH) include lib .. cscope: diff --git a/tools/testing/selftests/lib.mk b/tools/testing/selftests/lib.mk index 0a8e75886224..8b0f16409ed7 100644 --- a/tools/testing/selftests/lib.mk +++ b/tools/testing/selftests/lib.mk @@ -16,18 +16,18 @@ TEST_GEN_PROGS := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS)) TEST_GEN_PROGS_EXTENDED := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_PROGS_EXTENDED)) TEST_GEN_FILES := $(patsubst %,$(OUTPUT)/%,$(TEST_GEN_FILES)) +ifdef KSFT_KHDR_INSTALL top_srcdir ?= ../../../.. include $(top_srcdir)/scripts/subarch.include ARCH ?= $(SUBARCH) -all: $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) - .PHONY: khdr khdr: make ARCH=$(ARCH) -C $(top_srcdir) headers_install -ifdef KSFT_KHDR_INSTALL -$(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES):| khdr +all: khdr $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) +else +all: $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) endif .ONESHELL: diff --git a/tools/testing/selftests/networking/timestamping/Makefile b/tools/testing/selftests/networking/timestamping/Makefile index 14cfcf006936..c46c0eefab9e 100644 --- a/tools/testing/selftests/networking/timestamping/Makefile +++ b/tools/testing/selftests/networking/timestamping/Makefile @@ -6,6 +6,7 @@ TEST_PROGS := hwtstamp_config rxtimestamp timestamping txtimestamp all: $(TEST_PROGS) top_srcdir = ../../../../.. +KSFT_KHDR_INSTALL := 1 include ../../lib.mk clean: diff --git a/tools/testing/selftests/tc-testing/bpf/Makefile b/tools/testing/selftests/tc-testing/bpf/Makefile index dc92eb271d9a..be5a5e542804 100644 --- a/tools/testing/selftests/tc-testing/bpf/Makefile +++ b/tools/testing/selftests/tc-testing/bpf/Makefile @@ -4,6 +4,7 @@ APIDIR := ../../../../include/uapi TEST_GEN_FILES = action.o top_srcdir = ../../../../.. +KSFT_KHDR_INSTALL := 1 include ../../lib.mk CLANG ?= clang diff --git a/tools/testing/selftests/vm/Makefile b/tools/testing/selftests/vm/Makefile index 6e67e726e5a5..e13eb6cc8901 100644 --- a/tools/testing/selftests/vm/Makefile +++ b/tools/testing/selftests/vm/Makefile @@ -25,6 +25,7 @@ TEST_GEN_FILES += virtual_address_range TEST_PROGS := run_vmtests +KSFT_KHDR_INSTALL := 1 include ../lib.mk $(OUTPUT)/userfaultfd: LDLIBS += -lpthread -- cgit