diff options
Diffstat (limited to 'ShellPkg/Library/UefiShellDebug1CommandsLib/SmbiosView/PrintInfo.h')
| -rw-r--r-- | ShellPkg/Library/UefiShellDebug1CommandsLib/SmbiosView/PrintInfo.h | 411 |
1 files changed, 0 insertions, 411 deletions
diff --git a/ShellPkg/Library/UefiShellDebug1CommandsLib/SmbiosView/PrintInfo.h b/ShellPkg/Library/UefiShellDebug1CommandsLib/SmbiosView/PrintInfo.h deleted file mode 100644 index d24aeb96cc..0000000000 --- a/ShellPkg/Library/UefiShellDebug1CommandsLib/SmbiosView/PrintInfo.h +++ /dev/null @@ -1,411 +0,0 @@ -/** @file
- Module to clarify the element info of the smbios structure.
-
- Copyright (c) 2005 - 2012, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#ifndef _SMBIOS_PRINT_INFO_H_
-#define _SMBIOS_PRINT_INFO_H_
-
-#include <IndustryStandard/SmBios.h>
-
-extern UINT8 SmbiosMajorVersion;
-extern UINT8 SmbiosMinorVersion;
-
-#define SHOW_NONE 0x00
-#define SHOW_OUTLINE 0x01
-#define SHOW_NORMAL 0x02
-#define SHOW_DETAIL 0x03
-//
-// SHOW_ALL: WaitEnter() not wait input.
-//
-#define SHOW_ALL 0x04
-#define SHOW_STATISTICS 0x05
-
-#define AS_UINT16(pData) (*((UINT16 *) pData))
-#define AS_UINT32(pData) (*((UINT32 *) pData))
-#define AS_UINT64(pData) (*((UINT64 *) pData))
-
-/**
- Print the info of EPS(Entry Point Structure).
-
- @param[in] SmbiosTable Pointer to the SMBIOS table entry point.
- @param[in] Option Display option.
-**/
-VOID
-SmbiosPrintEPSInfo (
- IN SMBIOS_TABLE_ENTRY_POINT *SmbiosTable,
- IN UINT8 Option
- );
-
-/**
- This function print the content of the structure pointed by Struct.
-
- @param[in] Struct Point to the structure to be printed.
- @param[in] Option Print option of information detail.
-
- @retval EFI_SUCCESS Successfully Printing this function.
- @retval EFI_INVALID_PARAMETER Invalid Structure.
- @retval EFI_UNSUPPORTED Unsupported.
-**/
-EFI_STATUS
-SmbiosPrintStructure (
- IN SMBIOS_STRUCTURE_POINTER *Struct,
- IN UINT8 Option
- );
-
-/**
- Display BIOS Information (Type 0) information.
-
- @param[in] Chara The information bits.
- @param[in] Option The optional information.
-**/
-VOID
-DisplayBiosCharacteristics (
- IN UINT64 Chara,
- IN UINT8 Option
- );
-
-/**
- Display Bios Characteristice extensions1 information.
-
- @param[in] Byte1 The information.
- @param[in] Option The optional information.
-**/
-VOID
-DisplayBiosCharacteristicsExt1 (
- IN UINT8 Byte1,
- IN UINT8 Option
- );
-
-/**
- Display Bios Characteristice extensions2 information.
-
- @param[in] Byte2 The information.
- @param[in] Option The optional information.
-**/
-VOID
-DisplayBiosCharacteristicsExt2 (
- IN UINT8 Byte2,
- IN UINT8 Option
- );
-
-/**
- Display Processor Information (Type 4) information.
-
- @param[in] Family The family value.
- @param[in] Option The option value.
-**/
-VOID
-DisplayProcessorFamily (
- UINT8 Family,
- UINT8 Option
- );
-
-/**
- Display processor family information.
-
- @param[in] Family2 The family value.
- @param[in] Option The option value.
-**/
-VOID
-DisplayProcessorFamily2 (
- IN UINT16 Family2,
- IN UINT8 Option
- );
-
-/**
- Display processor voltage information.
-
- @param[in] Voltage The Voltage.
- Bit 7 Set to 0, indicating 'legacy' mode for processor voltage
- Bits 6:4 Reserved, must be zero
- Bits 3:0 Voltage Capability.
- A Set bit indicates that the voltage is supported.
- Bit 0 - 5V
- Bit 1 - 3.3V
- Bit 2 - 2.9V
- Bit 3 - Reserved, must be zero.
-
- Note:
- Setting of multiple bits indicates the socket is configurable
- If bit 7 is set to 1, the remaining seven bits of the field are set to
- contain the processor's current voltage times 10.
- For example, the field value for a processor voltage of 1.8 volts would be
- 92h = 80h + (1.8 * 10) = 80h + 18 = 80h +12h.
-
- @param[in] Option The option.
-**/
-VOID
-DisplayProcessorVoltage (
- IN UINT8 Voltage,
- IN UINT8 Option
- );
-
-/**
- Display processor information.
-
- @param[in] Status The status.
-Bit 7 Reserved, must be 0
-Bit 6 CPU Socket Populated
- 1 - CPU Socket Populated
- 0 - CPU Socket Unpopulated
-Bits 5:3 Reserved, must be zero
-Bits 2:0 CPU Status
- 0h - Unknown
- 1h - CPU Enabled
- 2h - CPU Disabled by User via BIOS Setup
- 3h - CPU Disabled By BIOS (POST Error)
- 4h - CPU is Idle, waiting to be enabled.
- 5-6h - Reserved
- 7h - Other
-
- @param[in] Option The option
-**/
-VOID
-DisplayProcessorStatus (
- IN UINT8 Status,
- IN UINT8 Option
- );
-
-/**
- Display information about Memory Controller Information (Type 5).
-
- @param[in] Size Memory size.
- @param[in] SlotNum Which slot is this about.
- @param[in] Option Option for the level of detail output required.
-**/
-VOID
-DisplayMaxMemoryModuleSize (
- IN UINT8 Size,
- IN UINT8 SlotNum,
- IN UINT8 Option
- );
-
-/**
- Display information about memory configuration handles.
-
- @param[in] Handles The buffer of handles to output info on.
- @param[in] SlotNum The number of handles in the above buffer.
- @param[in] Option Option for the level of detail output required.
-**/
-VOID
-DisplayMemoryModuleConfigHandles (
- IN UINT16 *Handles,
- IN UINT8 SlotNum,
- IN UINT8 Option
- );
-
-/**
- Display Memory Module Information (Type 6).
-
- @param[in] BankConnections
- @param[in] Option
-**/
-VOID
-DisplayMmBankConnections (
- IN UINT8 BankConnections,
- IN UINT8 Option
- );
-
-/**
- Display memory informcation.
-
- Bits 0:6 Size (n),
- where 2**n is the size in MB with three special-case values:
- 7Dh Not determinable (Installed Size only)
- 7Eh Module is installed, but no memory has been enabled
- 7Fh Not installed
- Bit 7 Defines whether the memory module has a single- (0)
- or double-bank (1) connection.
-
- @param[in] Size - The size
- @param[in] Option - The option
-**/
-VOID
-DisplayMmMemorySize (
- IN UINT8 Size,
- IN UINT8 Option
- );
-
-/**
- Display Cache Configuration.
-
- @param[in] CacheConfiguration Cache Configuration.
-Bits 15:10 Reserved, must be 0
-Bits 9:8 Operational Mode
- 0h - Write Through
- 1h - Write Back
- 2h - Varies with Memory Address
- 3h - Unknown
-Bit 7 Enabled/Disabled
- 1 - Enabled
- 0 - Disabled
-Bits 6:5 Location
- 0h - Internal
- 1h - External
- 2h - Reserved
- 3h - Unknown
-Bit 4 Reserved, must be zero
-Bit 3 Cache Socketed
- 1 - Socketed
- 0 - Unsocketed
-Bits 2:0 Cache Level
- 1 through 8 (For example, an L1 cache would
- use value 000b and an L3 cache would use 010b.)
-
- @param[in] Option The option
-**/
-VOID
-DisplayCacheConfiguration (
- IN UINT16 CacheConfiguration,
- IN UINT8 Option
- );
-
-/**
- The Slot ID field of the System Slot structure provides a mechanism to
- correlate the physical attributes of the slot to its logical access method
- (which varies based on the Slot Type field).
-
- @param[in] SlotId - The slot ID
- @param[in] SlotType - The slot type
- @param[in] Option - The Option
-**/
-VOID
-DisplaySystemSlotId (
- IN UINT16 SlotId,
- IN UINT8 SlotType,
- IN UINT8 Option
- );
-
-/**
- Display Portable Battery (Type 22) information.
-
- The date the cell pack was manufactured, in packed format:
- Bits 15:9 Year, biased by 1980, in the range 0 to 127.
- Bits 8:5 Month, in the range 1 to 12.
- Bits 4:0 Date, in the range 1 to 31.
- For example, 01 February 2000 would be identified as
- 0010 1000 0100 0001b (0x2841).
-
- @param[in] Date The date
- @param[in] Option The option
-**/
-VOID
-DisplaySBDSManufactureDate (
- IN UINT16 Date,
- IN UINT8 Option
- );
-
-/**
- Display System Reset (Type 23) information.
-
- Routine Description:
- Identifies the system-reset capabilities for the system.
- Bits 7:6 Reserved for future assignment via this specification, set to 00b.
- Bit 5 System contains a watchdog timer, either True (1) or False (0).
- Bits 4:3 Boot Option on Limit.
- Identifies the system action to be taken when the Reset Limit is reached, one of:
- 00b Reserved, do not use.
- 01b Operating system
- 10b System utilities
- 11b Do not rebootBits
- 2:1 Boot Option. Indicates the action to be taken following a watchdog reset, one of:
- 00b Reserved, do not use.
- 01b Operating system
- 10b System utilities
- 11b Do not reboot
- Bit 0 Status.
- 1b The system reset is enabled by the user
- 0b The system reset is not enabled by the user
-
- @param[in] Reset Reset
- @param[in] Option The option
-**/
-VOID
-DisplaySystemResetCapabilities (
- IN UINT8 Reset,
- IN UINT8 Option
- );
-
-/**
- Display Hardware Security (Type 24) information.
-
- Routine Description:
- Identifies the password and reset status for the system:
-
- Bits 7:6 Power-on Password Status, one of:
- 00b Disabled
- 01b Enabled
- 10b Not Implemented
- 11b Unknown
- Bits 5:4 Keyboard Password Status, one of:
- 00b Disabled
- 01b Enabled
- 10b Not Implemented
- 11b Unknown
- Bits 3:2 Administrator Password Status, one of:
- 00b Disabled
- 01b Enabled
- 10b Not Implemented
- 11b Unknown
- Bits 1:0 Front Panel Reset Status, one of:
- 00b Disabled
- 01b Enabled
- 10b Not Implemented
- 11b Unknown
-
- @param[in] Settings The device settings.
- @param[in] Option The device options.
-**/
-VOID
-DisplayHardwareSecuritySettings (
- IN UINT8 Settings,
- IN UINT8 Option
- );
-
-/**
- Display Out-of-Band Remote Access (Type 30) information.
-
- @param[in] Connections The device characteristics.
- @param[in] Option The device options.
-**/
-VOID
-DisplayOBRAConnections (
- IN UINT8 Connections,
- IN UINT8 Option
- );
-
-/**
- Display System Boot Information (Type 32) information.
-
- @param[in] Parameter The parameter.
- @param[in] Option The options.
-**/
-VOID
-DisplaySystemBootStatus (
- IN UINT8 Parameter,
- IN UINT8 Option
- );
-
-/**
- Display System Power Supply (Type 39) information.
-
- @param[in] Characteristics The device characteristics.
- @param[in] Option The device options.
-**/
-VOID
-DisplaySPSCharacteristics (
- IN UINT16 Characteristics,
- IN UINT8 Option
- );
-
-#endif
|