[usb] Allow device halt to be cleared independently of host controller

Closing and reopening a USB endpoint will clear any halt status
recorded by the host controller, but may leave the endpoint halted at
the device.  This will cause the first packet submitted to the
reopened endpoint to be lost, before the automatic stall recovery
mechanism detects the halt and resets the endpoint.

This is relatively harmless for USB network or HID devices, since the
wire protocols will recover gracefully from dropped packets.  Some
protocols (e.g. for USB mass storage devices) assume zero packet loss
and so would be adversely affected.

Fix by allowing any device endpoint halt status to be cleared on a
freshly opened endpoint.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

1 files changed, 31 insertions, 14 deletions

diff --git a/src/drivers/bus/usb.c b/src/drivers/bus/usb.c
index 14eabb6b4..88df9c64a 100644
--- a/src/drivers/bus/usb.c
+++ b/src/drivers/bus/usb.c
@@ -363,6 +363,35 @@ static int usb_endpoint_clear_tt ( struct usb_endpoint *ep ) {
 }
 
 /**
+ * Clear endpoint halt (if applicable)
+ *
+ * @v ep		USB endpoint
+ * @ret rc		Return status code
+ */
+int usb_endpoint_clear_halt ( struct usb_endpoint *ep ) {
+	struct usb_device *usb = ep->usb;
+	unsigned int type;
+	int rc;
+
+	/* Clear transaction translator, if applicable */
+	if ( ( rc = usb_endpoint_clear_tt ( ep ) ) != 0 )
+		return rc;
+
+	/* Clear endpoint halt (if applicable) */
+	type = ( ep->attributes & USB_ENDPOINT_ATTR_TYPE_MASK );
+	if ( ( type != USB_ENDPOINT_ATTR_CONTROL ) &&
+	     ( ( rc = usb_clear_feature ( usb, USB_RECIP_ENDPOINT,
+					  USB_ENDPOINT_HALT,
+					  ep->address ) ) != 0 ) ) {
+		DBGC ( usb, "USB %s %s could not clear endpoint halt: %s\n",
+		       usb->name, usb_endpoint_name ( ep ), strerror ( rc ) );
+		return rc;
+	}
+
+	return 0;
+}
+
+/**
  * Close USB endpoint
  *
  * @v ep		USB endpoint
@@ -399,27 +428,15 @@ void usb_endpoint_close ( struct usb_endpoint *ep ) {
  */
 static int usb_endpoint_reset ( struct usb_endpoint *ep ) {
 	struct usb_device *usb = ep->usb;
-	unsigned int type;
 	int rc;
 
 	/* Sanity check */
 	assert ( ! list_empty ( &ep->halted ) );
 
-	/* Clear transaction translator, if applicable */
-	if ( ( rc = usb_endpoint_clear_tt ( ep ) ) != 0 )
+	/* Clear device halt, if applicable */
+	if ( ( rc = usb_endpoint_clear_halt ( ep ) ) != 0 )
 		return rc;
 
-	/* Clear endpoint halt, if applicable */
-	type = ( ep->attributes & USB_ENDPOINT_ATTR_TYPE_MASK );
-	if ( ( type != USB_ENDPOINT_ATTR_CONTROL ) &&
-	     ( ( rc = usb_clear_feature ( usb, USB_RECIP_ENDPOINT,
-					  USB_ENDPOINT_HALT,
-					  ep->address ) ) != 0 ) ) {
-		DBGC ( usb, "USB %s %s could not clear endpoint halt: %s\n",
-		       usb->name, usb_endpoint_name ( ep ), strerror ( rc ) );
-		return rc;
-	}
-
 	/* Reset endpoint */
 	if ( ( rc = ep->host->reset ( ep ) ) != 0 ) {
 		DBGC ( usb, "USB %s %s could not reset: %s\n",