1 files changed, 0 insertions, 95 deletions
diff --git a/contrib/bochs/README b/contrib/bochs/README
deleted file mode 100644
index e0e880329..000000000
--- a/contrib/bochs/README
+++ /dev/null
@@ -1,95 +0,0 @@
-Running Etherboot within Bochs
-==============================
-
-Michael Brown <mbrown@fensystems.co.uk>
-Based on an idea suggested by H. Peter Anvin <hpa@zytor.com>.
-
-$Id$
-
-Bochs is a program that simulates a complete Intel x86 computer,
-including hardware.  It can be used to test Etherboot.  There is a
-special pseudo NIC ("pnic") implemented in Bochs, with a corresponding
-driver in Etherboot.  (There is also an NE2000 ISA driver in Bochs,
-but it doesn't seem to quite work.)
-
-To get bochs running is fairly simple:
-
-1.  Build the utilities in this directory:
-      make
-
-2.  Get the bochs source code:
-      cvs -d:pserver:anonymous@bochs.cvs.sourceforge.net:/cvsroot/bochs \
-           login
-      cvs -d:pserver:anonymous@bochs.cvs.sourceforge.net:/cvsroot/bochs \
-           co bochs
-
-3.  Configure bochs with
-      pushd bochs
-      ./configure --enable-all-optimisations --enable-show-ips \
-		  --enable-cpu-level=6 \
-		  --enable-pci --enable-pnic --enable-ne2000 \
-                  --enable-debugger --enable-disasm
-      popd
-
-4.  Build bochs:
-      make -C bochs
-
-5.  As root, set up a TAP virtual network device:
-      /sbin/modprobe tun
-      chmod o+rw /dev/net/tun
-      ./tunctl -u <username> -t tap0
-      /sbin/ifconfig tap0 up 10.254.254.2 netmask 255.255.255.0
-
-6.  As root, add the following fragment to /etc/dhcpd.conf:
-      subnet 10.254.254.0 netmask 255.255.255.252 {
-        range dynamic-bootp 10.254.254.1 10.254.254.1;
-      }
-    You will also need to add in any of your usual declarations for
-    Etherboot, e.g. 'filename "vmlinuz.ltsp";'.  Note that this setup
-    assumes that your DHCP server, TFTP server etc. all live on the
-    machine you are using for running Bochs.  If not, then you're on
-    your own.
-
-7.  As root, restart dhcpd
-      /etc/init.d/dhcpd restart
-
-8.  Build Etherboot images
-      pushd ../../src
-      make bin/pnic.dsk
-      popd
-
-9.  Start Bochs
-      ./bochs/bochs -q
-    You should get to the debugger prompt "<bochs:1>".  Type "c" to
-    start running Bochs.
-
-You should see Bochs start up, load up Etherboot and attempt to boot
-from the network.
-
-
-
-Serial console
-==============
-
-You can use the program "serial-console" to obtain a virtual serial
-console for Etherboot running within Bochs.  Simply run
-"./serial-console" on a spare tty (e.g. a separate xterm window)
-before starting Bochs, and ensure that you have enabled CONSOLE_SERIAL
-in config.h.
-
-There is a manual page for "serial-console"; use
-"man ./serial-console.1" to view it.
-
-
-
-TODO
-====
-
-Packet forwarding/masquerading - document what must be set up.
-
-Mention possibility of using RFB as the display device - in
-conjunction with the serial console, gives you a test facility that
-can be accessed remotely.
-
-Mention use of BOCHSBP instruction (xchgw %bx,%bx) to avoid need to
-calculate breakpoints.