| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
| |
Try loading the autoexec.ipxe script first from the directory
containing the iPXE binary (based on the relative file path provided
to us via EFI_LOADED_IMAGE_PROTOCOL), then fall back to trying the
root directory.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
When chainloading iPXE from a VLAN device, the MAC address of the
loaded image's device handle will match the MAC address of the trunk
device created by iPXE, and the autoboot process will then erroneously
consider the trunk device to be an autoboot device.
Fix by recording the VLAN tag along with the MAC address, and treating
the VLAN tag as part of the filter used to match the MAC address
against candidate network devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When chainloading iPXE from a VLAN device, the MAC address within the
cached DHCPACK will match the MAC address of the trunk device created
by iPXE, and the cached DHCPACK will then end up being erroneously
applied to the trunk device. This tends to break outbound IPv4
routing, since both the trunk and VLAN devices will have the same
assigned IPv4 address.
Fix by recording the VLAN tag along with the cached DHCPACK, and
treating the VLAN tag as part of the filter used to match the cached
DHCPACK against candidate network devices.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
| |
Record the cached DHCPACK obtained from the EFI_PXE_BASE_CODE_PROTOCOL
instance installed on the loaded image's device handle, if present.
This allows a chainloaded UEFI iPXE to reuse the IPv4 address and DHCP
options previously obtained by the built-in PXE stack, as is already
done for a chainloaded BIOS iPXE.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
The code to detect the autoboot link-layer address and to load the
autoexec script currently runs before the call to initialise() and so
has to function without a working heap.
This requirement can be relaxed by deferring this code to run via an
initialisation function. This gives the code a normal runtime
environment, but still invokes it early enough to guarantee that the
original loaded image device handle has not yet been invalidated.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
| |
The "autoboot device" and "autoexec script" functionalities in
efi_autoboot.c are unrelated except in that they both need to be
invoked by efiprefix.c before device drivers are loaded.
Split out the autoexec script portions to a separate file to avoid
potential confusion.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Some UEFI drivers (observed with the "Usb Xhci Driver" on an HP
EliteBook) are particularly badly behaved: they cannot be unloaded and
will leave handles opened with BY_DRIVER attributes even after
disconnecting the driver, thereby preventing a replacement iPXE driver
from opening the handle.
Allow such drivers to be vetoed by falling back to a brute-force
mechanism that will disconnect the driver from all handles, uninstall
the driver binding protocol (to prevent it from attaching to any new
handles), and finally close any stray handles that the vetoed driver
has left open.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
| |
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable -fstack-protector for EFI builds, where binary size is less
critical than for BIOS builds.
The stack cookie must be constructed immediately on entry, which
prohibits the use of any viable entropy source. Construct a cookie by
XORing together various mildly random quantities to produce a value
that will at least not be identical on each run.
On detecting a stack corruption, attempt to call Exit() with an
appropriate error. If that fails, then lock up the machine since
there is no other safe action that can be taken.
The old conditional check for support of -fno-stack-protector is
omitted since this flag dates back to GCC 4.1.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On a Dell OptiPlex 7010, calling DisconnectController() on the LOM
device handle will lock up the system. Debugging shows that execution
is trapped in an infinite loop that is somehow trying to reconnect
drivers (without going via ConnectController()).
The problem can be reproduced in the UEFI shell with no iPXE code
present, by using the "disconnect" command. Experimentation shows
that the only fix is to unload (rather than just disconnect) the
"Ip4ConfigDxe" driver.
Add the concept of a blacklist of UEFI drivers that will be
automatically unloaded when iPXE runs as an application, and add the
Dell Ip4ConfigDxe driver to this blacklist.
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
|
|
Signed-off-by: Michael Brown <mcb30@ipxe.org>
|
