arm: dts: agilex5: Add firewall configure settings

These firewall configure settings are needed to disable firewall on
respective hardware component so both secure and non-secure transactions
are allowed.

Signed-off-by: Tien Fong Chee <tien.fong.chee@altera.com>

1 files changed, 166 insertions, 0 deletions

diff --git a/arch/arm/dts/socfpga_agilex5-u-boot.dtsi b/arch/arm/dts/socfpga_agilex5-u-boot.dtsi
index 4270dce38df..08f568f5650 100644
--- a/arch/arm/dts/socfpga_agilex5-u-boot.dtsi
+++ b/arch/arm/dts/socfpga_agilex5-u-boot.dtsi
@@ -222,6 +222,172 @@
 				bootph-all;
 			};
 		};
+
+		socfpga_firewall_config: socfpga-firewall-config {
+			compatible = "intel,socfpga-dtreg";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bootph-all;
+
+			/* L4 peripherals firewall */
+			noc_fw_l4_per@10d21000 {
+				reg = <0x10d21000 0x0000008c>;
+				intel,offset-settings =
+					/* NAND */
+					<0x00000000 0x01010001 0x01010001>,
+					/* USB0 */
+					<0x0000000c 0x01010001 0x01010001>,
+					/* USB1 */
+					<0x00000010 0x01010001 0x01010001>,
+					/* SPI_MAIN0 */
+					<0x0000001c 0x01010301 0x01010301>,
+					/* SPI_MAIN1 */
+					<0x00000020 0x01010301 0x01010301>,
+					/* SPI_SECONDARY0 */
+					<0x00000024 0x01010301 0x01010301>,
+					/* SPI_SECONDARY1 */
+					<0x00000028 0x01010301 0x01010301>,
+					/* EMAC0 */
+					<0x0000002c 0x01010001 0x01010001>,
+					/* EMAC1 */
+					<0x00000030 0x01010001 0x01010001>,
+					/* EMAC2 */
+					<0x00000034 0x01010001 0x01010001>,
+					/* SDMMC */
+					<0x00000040 0x01010001 0x01010001>,
+					/* GPIO0 */
+					<0x00000044 0x01010301 0x01010301>,
+					/* GPIO1 */
+					<0x00000048 0x01010301 0x01010301>,
+					/* I2C0 */
+					<0x00000050 0x01010301 0x01010301>,
+					/* I2C1 */
+					<0x00000054 0x01010301 0x01010301>,
+					/* I2C2 */
+					<0x00000058 0x01010301 0x01010301>,
+					/* I2C3 */
+					<0x0000005c 0x01010301 0x01010301>,
+					/* I2C4 */
+					<0x00000060 0x01010301 0x01010301>,
+					/* SP_TIMER0 */
+					<0x00000064 0x01010301 0x01010301>,
+					/* SP_TIMER1 */
+					<0x00000068 0x01010301 0x01010301>,
+					/* UART0 */
+					<0x0000006c 0x01010301 0x01010301>,
+					/* UART1 */
+					<0x00000070 0x01010301 0x01010301>,
+					/* I3C0 */
+					<0x00000074 0x01010301 0x01010301>,
+					/* I3C1 */
+					<0x00000078 0x01010301 0x01010301>,
+					/* DMA0 */
+					<0x0000007c 0x01010001 0x01010001>,
+					/* DMA1 */
+					<0x00000080 0x01010001 0x01010001>,
+					/* COMBO_PHY */
+					<0x00000084 0x01010001 0x01010001>,
+					/* NAND_SDMA */
+					<0x00000088 0x01010301 0x01010301>;
+				bootph-all;
+			};
+
+			/* L4 system firewall */
+			noc_fw_l4_sys@10d21100 {
+				reg = <0x10d21100 0x00000098>;
+				intel,offset-settings =
+					/* DMA_ECC */
+					<0x00000008 0x01010001 0x01010001>,
+					/* EMAC0RX_ECC */
+					<0x0000000c 0x01010001 0x01010001>,
+					/* EMAC0TX_ECC */
+					<0x00000010 0x01010001 0x01010001>,
+					/* EMAC1RX_ECC */
+					<0x00000014 0x01010001 0x01010001>,
+					/* EMAC1TX_ECC */
+					<0x00000018 0x01010001 0x01010001>,
+					/* EMAC2RX_ECC */
+					<0x0000001c 0x01010001 0x01010001>,
+					/* EMAC2TX_ECC */
+					<0x00000020 0x01010001 0x01010001>,
+					/* NAND_ECC */
+					<0x0000002c 0x01010001 0x01010001>,
+					/* NAND_READ_ECC */
+					<0x00000030 0x01010001 0x01010001>,
+					/* NAND_WRITE_ECC */
+					<0x00000034 0x01010001 0x01010001>,
+					/* OCRAM_ECC */
+					<0x00000038 0x01010001 0x01010001>,
+					/* SDMMC_ECC */
+					<0x00000040 0x01010001 0x01010001>,
+					/* USB0_ECC */
+					<0x00000044 0x01010001 0x01010001>,
+					/* USB1_CACHEECC */
+					<0x00000048 0x01010001 0x01010001>,
+					/* CLOCK_MANAGER */
+					<0x0000004c 0x01010001 0x01010001>,
+					/* IO_MANAGER */
+					<0x00000054 0x01010001 0x01010001>,
+					/* RESET_MANAGER */
+					<0x00000058 0x01010001 0x01010001>,
+					/* SYSTEM_MANAGER */
+					<0x0000005c 0x01010001 0x01010001>,
+					/* OSC0_TIMER */
+					<0x00000060 0x01010301 0x01010301>,
+					/* OSC1_TIMER0*/
+					<0x00000064 0x01010301 0x01010301>,
+					/* WATCHDOG0 */
+					<0x00000068 0x01010301 0x01010301>,
+					/* WATCHDOG1 */
+					<0x0000006c 0x01010301 0x01010301>,
+					/* WATCHDOG2 */
+					<0x00000070 0x01010301 0x01010301>,
+					/* WATCHDOG3 */
+					<0x00000074 0x01010301 0x01010301>,
+					/* DAP */
+					<0x00000078 0x03010001 0x03010001>,
+					/* WATCHDOG4 */
+					<0x0000007c 0x01010301 0x01010301>,
+					/* POWER_MANAGER */
+					<0x00000080 0x01010001 0x01010001>,
+					/* USB1_RXECC */
+					<0x00000084 0x01010001 0x01010001>,
+					/* USB1_TXECC */
+					<0x00000088 0x01010001 0x01010001>,
+					/* L4_NOC_PROBES */
+					<0x00000090 0x01010001 0x01010001>,
+					/* L4_NOC_QOS */
+					<0x00000094 0x01010001 0x01010001>;
+				bootph-all;
+			};
+
+			/* Light weight SoC2FPGA */
+			noc_fw_lwsoc2fpga@10d21300 {
+				reg = <0x10d21300 0x0000004>;
+				intel,offset-settings =
+					/* LWSOC2FPGA_CSR */
+					<0x00000000 0x0ffe0301 0x0ffe0301>;
+				bootph-all;
+			};
+
+			/* SoC2FPGA */
+			noc_fw_soc2fpga@10d21200 {
+				reg = <0x10d21200 0x0000004>;
+				intel,offset-settings =
+					/* SOC2FPGA_CSR */
+					<0x00000000 0x0ffe0301 0x0ffe0301>;
+				bootph-all;
+			};
+
+			/* TCU */
+			noc_fw_tcu@10d21400 {
+				reg = <0x10d21400 0x0000004>;
+				intel,offset-settings =
+					/* TCU_CSR */
+					<0x00000000 0x01010001 0x01010001>;
+				bootph-all;
+			};
+		};
 	};
 };