arm: a37xx: Update DTS files to version from upstream Linux kernel

This change updates all Armada 37xx DTS files to version which is used by
Linux kernel v5.18.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>

1 files changed, 140 insertions, 84 deletions

diff --git a/arch/arm/dts/armada-3720-db.dts b/arch/arm/dts/armada-3720-db.dts
index 6272d83fc01..3e5789f3720 100644
--- a/arch/arm/dts/armada-3720-db.dts
+++ b/arch/arm/dts/armada-3720-db.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada 3720 development board
  * (DB-88F3720-DDR3)
@@ -5,47 +6,14 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * This file is compatible with the version 1.4 and the version 2.0 of
+ * the board, however the CON numbers are different between the 2
+ * version
  */
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include "armada-372x.dtsi"
 
 / {
@@ -56,52 +24,118 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	aliases {
-		ethernet0 = &eth0;
-		i2c0 = &i2c0;
-		spi0 = &spi0;
-	};
-
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
 	};
-};
 
-&comphy {
-	phy0 {
-		phy-type = <COMPHY_TYPE_USB3_HOST0>;
-		phy-speed = <COMPHY_SPEED_5G>;
+	exp_usb3_vbus: usb3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		regulator-always-on;
+		gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&exp_usb3_vbus>;
 	};
 
-	phy1 {
-		phy-type = <COMPHY_TYPE_PEX0>;
-		phy-speed = <COMPHY_SPEED_2_5G>;
+	vcc_sd_reg1: regulator {
+		compatible = "regulator-gpio";
+		regulator-name = "vcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	vcc_sd_reg2: regulator-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sd2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio_exp 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
+/* Gigabit module on CON19(V2.0)/CON21(V1.4) */
 &eth0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&rgmii_pins>, <&smi_pins>;
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	status = "okay";
+};
+
+/* Gigabit module on CON18(V2.0)/CON20(V1.4) */
+&eth1 {
+	phy-mode = "sgmii";
+	phy = <&phy1>;
 	status = "okay";
-	phy-mode = "rgmii";
 };
 
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	status = "okay";
+
+	gpio_exp: pca9555@22 {
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0x22>;
+		/*
+		 * IO0_0: PWR_EN_USB2	IO1_0: PWR_EN_VTT
+		 * IO0_1: PWR_EN_USB23	IO1_1: MPCIE_WDISABLE
+		 * IO0_2: PWR_EN_SATA	IO1_2: RGMII_DEV_RSTN
+		 * IO0_3: PWR_EN_PCIE	IO1_3: SGMII_DEV_RSTN
+		 * IO0_4: PWR_EN_SD
+		 * IO0_5: PWR_EN_EMMC
+		 * IO0_6: PWR_EN_RGMII	IO1_6: SATA_USB3.0_SEL
+		 * IO0_7: PWR_EN_SGMII	IO1_7: PWR_MCI_PS
+		 */
+	};
+
+	rtc@68  {
+		/* PT7C4337A from pericom fully compatible with the ds1337 */
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
 };
 
-/* CON3 */
-&sata {
+&mdio {
 	status = "okay";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
-&sdhci1 {
-	bus-width = <4>;
+/* CON15(V2.0)/CON17(V1.4) : PCIe / CON15(V2.0)/CON12(V1.4) :mini-PCIe */
+&pcie0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sdio_pins>;
+	pinctrl-0 = <&pcie_reset_pins &pcie_clkreq_pins>;
+	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* CON3 */
+&sata {
 	status = "okay";
 };
 
@@ -111,16 +145,18 @@
 	mmc-ddr-1_8v;
 	mmc-hs400-1_8v;
 	marvell,pad-type = "fixed-1-8v";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc_pins>;
 	status = "okay";
+};
 
-	#address-cells = <1>;
-	#size-cells = <0>;
-	mmccard: mmccard@0 {
-		compatible = "mmc-card";
-		reg = <0>;
-	};
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+	wp-inverted;
+	cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	marvell,pad-type = "sd";
+	vqmmc-supply = <&vcc_sd_reg1>;
+	vmmc-supply = <&vcc_sd_reg2>;
+	status = "okay";
 };
 
 &spi0 {
@@ -128,37 +164,57 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_quad_pins>;
 
-	spi-flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor";
-		reg = <0>; /* Chip select 0 */
-		spi-max-frequency = <50000000>;
-		m25p,fast-read;
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "U-boot Env";
+				reg = <0x200000 0x10000>;
+			};
+			partition@210000 {
+				label = "Linux";
+				reg = <0x210000 0xDF0000>;
+			};
+		};
 	};
 };
 
-/* Exported on the micro USB connector CON32 through an FTDI */
+/*
+ * Exported on the micro USB connector CON30(V2.0)/CON32(V1.4) through
+ * an FTDI (also on CON24(V2.0)/CON26(V1.4)).
+ */
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
 	status = "okay";
 };
 
-/* CON29 */
-&usb2 {
+/* CON26(V2.0)/CON28(V1.4) */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
 	status = "okay";
 };
 
-/* CON31 */
-&usb3 {
+/* CON27(V2.0)/CON29(V1.4) */
+&usb2 {
 	status = "okay";
 };
 
-/* CON17 */
-&pcie0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pcie_pins>;
-	reset-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+/* CON29(V2.0)/CON31(V1.4) */
+&usb3 {
 	status = "okay";
+	usb-phy = <&usb3_phy>;
 };