arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2

Sync sun7i-a20 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun7i-a20* sync:
"ARM: dts: sun7i: bananapi: Add GPIO banks regulators"
(sha1: 09c6572290f018d73ec2e812e28bada34d41815f)

Here are U-Boot specific dts changes.

- s/uart0_pins_a/uart0_pb_pins for
  sun7i-a20-ainol-aw1.dts
  sun7i-a20-m5.dts
  sun7i-a20-primo73.dts
  sun7i-a20-yones-toptech-bd1078.dts
  sunxi-itead-core-common.dtsi
- s/gmac_pins_mii_a/gmac_rgmii_pins for
  sun7i-a20-m5.dts
- drop i2c0, i2c1 pins from
  sunxi-itead-core-common.dtsi
- drop mmc0 pins from
  sun7i-a20-primo73.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

1 files changed, 10 insertions, 50 deletions

diff --git a/arch/arm/dts/sun7i-a20-hummingbird.dts b/arch/arm/dts/sun7i-a20-hummingbird.dts
index 1f0e5ecbf0c..fd0153f6568 100644
--- a/arch/arm/dts/sun7i-a20-hummingbird.dts
+++ b/arch/arm/dts/sun7i-a20-hummingbird.dts
@@ -67,8 +67,6 @@
 
 	reg_mmc3_vdd: mmc3_vdd {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>;
 		regulator-name = "mmc3_vdd";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
@@ -78,8 +76,6 @@
 
 	reg_gmac_vdd: gmac_vdd {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>;
 		regulator-name = "gmac_vdd";
 		regulator-min-microvolt = <3000000>;
 		regulator-max-microvolt = <3000000>;
@@ -103,7 +99,7 @@
 
 &gmac {
 	pinctrl-names = "default";
-	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	pinctrl-0 = <&gmac_rgmii_pins>;
 	phy = <&phy1>;
 	phy-mode = "rgmii";
 	phy-supply = <&reg_gmac_vdd>;
@@ -120,8 +116,6 @@
 };
 
 &i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
 	axp209: pmic@34 {
@@ -135,32 +129,24 @@
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_a>;
 	status = "okay";
 };
 
 &i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_a>;
 	status = "okay";
 };
 
 &i2c3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_a>;
 	status = "okay";
 };
 
 &ir0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ir0_rx_pins_a>;
+	pinctrl-0 = <&ir0_rx_pin>;
 	status = "okay";
 };
 
 &mmc0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc0_pins_a>;
 	vmmc-supply = <&reg_vcc3v0>;
 	bus-width = <4>;
 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
@@ -168,8 +154,6 @@
 };
 
 &mmc3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins_a>;
 	vmmc-supply = <&reg_mmc3_vdd>;
 	bus-width = <4>;
 	non-removable;
@@ -184,42 +168,18 @@
 	status = "okay";
 };
 
-&pio {
-	ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
-		pins = "PH15";
-		function = "gpio_out";
-	};
-
-	usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
-		pins = "PH2";
-		function = "gpio_out";
-	};
-
-	mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
-		pins = "PH9";
-		function = "gpio_out";
-	};
-
-	gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
-		pins = "PH16";
-		function = "gpio_out";
-	};
-};
-
 &pwm {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pwm0_pins_a>;
+	pinctrl-0 = <&pwm0_pin>;
 	status = "okay";
 };
 
 &reg_ahci_5v {
-	pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
 	gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
 	status = "okay";
 };
 
 &reg_usb1_vbus {
-	pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
 	gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
 	status = "okay";
 };
@@ -230,38 +190,38 @@
 
 &spi2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&spi2_pins_b>,
-		    <&spi2_cs0_pins_b>;
+	pinctrl-0 = <&spi2_pb_pins>,
+		    <&spi2_cs0_pb_pin>;
 	status = "okay";
 };
 
 &uart0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins_a>;
+	pinctrl-0 = <&uart0_pb_pins>;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins_a>;
+	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_a>;
+	pinctrl-0 = <&uart3_pg_pins>, <&uart3_cts_rts_pg_pins>;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
+	pinctrl-0 = <&uart4_pg_pins>;
 	status = "okay";
 };
 
 &uart5 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins_a>;
+	pinctrl-0 = <&uart5_pi_pins>;
 	status = "okay";
 };