diff options
| author | Sean Anderson <sean.anderson@seco.com> | 2022-03-22 17:16:05 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2022-04-01 16:56:44 -0400 |
| commit | 93c3d329707e0d8dc98e5f86938bbedbe15b5349 (patch) | |
| tree | 74fb19fa68429b864cbbd379c5feaacb499d98e9 /arch/arm/mach-imx/imx8m/soc.c | |
| parent | eeb54e81ca9226aa2a664af7d1e5bc2e44d790e3 (diff) | |
| download | u-boot-93c3d329707e0d8dc98e5f86938bbedbe15b5349.tar.gz | |
ls1046ardb: Add support for JTAG boot
This adds support for booting entirely from JTAG while using a
hard-coded RCW. With these steps, it is not necessary to program a
"good" RCW using CodeWarrior. The method here can be performed with any
JTAG adapter supported by OpenOCD, including the on-board CMSIS-DAP
(albeit very slowly).
These steps require LS1046A support in OpenOCD, which was added in [1].
[1] https://sourceforge.net/p/openocd/code/ci/5b70c1f679755677c925b4e6dd2c3d8be4715717/
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
[trini: Add reference to doc/board/nxp/ls1046ardb.rst]
Diffstat (limited to 'arch/arm/mach-imx/imx8m/soc.c')
0 files changed, 0 insertions, 0 deletions