imx: Drop unneeded phandle in FIT template

Adding a phandle to a template node is not allowed, since when the node is
instantiated multiple times, we end up with duplicate phandles.

Drop this invalid constructs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Tim Harvey <tharvey@gateworks.com>

7 files changed, 13 insertions, 9 deletions

diff --git a/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi b/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi
index 484e31824b8..d93e1cbd8a7 100644
--- a/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi
@@ -41,9 +41,11 @@
 	};
 };
 
+/* This cannot work since it refers to a template node
 &binman_configuration {
 	loadables = "atf", "fip";
 };
+*/
 
 &fec1 {
 	phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 035282bf0b0..6085128e24e 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -140,7 +140,7 @@
 			configurations {
 				default = "@config-DEFAULT-SEQ";
 
-				binman_configuration: @config-SEQ {
+				@config-SEQ {
 					description = "NAME";
 					fdt = "fdt-SEQ";
 					firmware = "uboot";
diff --git a/arch/arm/dts/imx8mn-u-boot.dtsi b/arch/arm/dts/imx8mn-u-boot.dtsi
index 5046b38e4e2..bc57566a108 100644
--- a/arch/arm/dts/imx8mn-u-boot.dtsi
+++ b/arch/arm/dts/imx8mn-u-boot.dtsi
@@ -204,7 +204,7 @@
 			configurations {
 				default = "@config-DEFAULT-SEQ";
 
-				binman_configuration: @config-SEQ {
+				@config-SEQ {
 					description = "NAME";
 					fdt = "fdt-SEQ";
 					firmware = "uboot";
diff --git a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
index f3fb44046d5..c4ea536b29b 100644
--- a/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-rsb3720-a1-u-boot.dtsi
@@ -162,6 +162,8 @@
 	};
 };
 
+/* This cannot work since it refers to a template node
 &binman_configuration {
 	loadables = "atf", "fip";
 };
+*/
diff --git a/arch/arm/dts/imx8mp-u-boot.dtsi b/arch/arm/dts/imx8mp-u-boot.dtsi
index 36e7444a627..200938a9807 100644
--- a/arch/arm/dts/imx8mp-u-boot.dtsi
+++ b/arch/arm/dts/imx8mp-u-boot.dtsi
@@ -146,7 +146,7 @@
 					type = "flat_dt";
 					compression = "none";
 
-					uboot_fdt_blob: blob-ext {
+					blob-ext {
 						filename = "u-boot.dtb";
 					};
 				};
@@ -155,7 +155,7 @@
 			configurations {
 				default = "@config-DEFAULT-SEQ";
 
-				binman_configuration: @config-SEQ {
+				@config-SEQ {
 					description = "NAME";
 					fdt = "fdt-SEQ";
 					firmware = "uboot";
diff --git a/arch/arm/dts/imx8qm-u-boot.dtsi b/arch/arm/dts/imx8qm-u-boot.dtsi
index a3e0af48109..d316e869516 100644
--- a/arch/arm/dts/imx8qm-u-boot.dtsi
+++ b/arch/arm/dts/imx8qm-u-boot.dtsi
@@ -112,7 +112,7 @@
 			configurations {
 				default = "@config-DEFAULT-SEQ";
 
-				binman_configuration: @config-SEQ {
+				@config-SEQ {
 					description = "NAME";
 					fdt = "fdt-SEQ";
 					firmware = "uboot";
diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
index 3ecb461b011..64318d09cf0 100644
--- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
@@ -41,7 +41,7 @@
 					os = "arm-trusted-firmware";
 					load = <CONFIG_K3_ATF_LOAD_ADDR>;
 					entry = <CONFIG_K3_ATF_LOAD_ADDR>;
-					atf: atf-bl31 {
+					atf-bl31 {
 					};
 				};
 
@@ -53,7 +53,7 @@
 					os = "tee";
 					load = <0x9e800000>;
 					entry = <0x9e800000>;
-					tee: tee-os {
+					tee-os {
 					};
 				};
 
@@ -78,7 +78,7 @@
 					compression = "none";
 					load = <CONFIG_SPL_TEXT_BASE>;
 					entry = <CONFIG_SPL_TEXT_BASE>;
-					u_boot_spl_nodtb: blob-ext {
+					blob-ext {
 						filename = "spl/u-boot-spl-nodtb.bin";
 					};
 				};
@@ -88,7 +88,7 @@
 					type = "flat_dt";
 					arch = "arm";
 					compression = "none";
-					spl_am65x_evm_dtb: blob-ext {
+					blob-ext {
 						filename = "spl/dts/k3-am65-iot2050-spl.dtb";
 					};
 				};