siemens,am335x: clean-up draco targets

Draco is a family of 3 boards: thuban, rastaban & etamin. Rename all
targets of the family adding the draco- prefix to increase readibility
and simplify future commits about concerning all boards of the family.

The name draco was initially used for the first target. It's deprecated
since a 2nd target was introduced. Unfortunately the draco target was
copied to the thuban target instead to be renamed. Remove it to save
unnecessary maintenance effort.

Signed-off-by: Enrico Leto <enrico.leto@siemens.com>

1 files changed, 0 insertions, 130 deletions

diff --git a/configs/etamin_defconfig b/configs/etamin_defconfig
deleted file mode 100644
index 4ac0abc56b0..00000000000
--- a/configs/etamin_defconfig
+++ /dev/null
@@ -1,130 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_LEN=0x1000000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x980000
-CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="am335x-draco"
-CONFIG_AM33XX=y
-CONFIG_SYS_MPUCLK=300
-CONFIG_TARGET_ETAMIN=y
-CONFIG_SPL_MMC=y
-CONFIG_SPL_SERIAL=y
-CONFIG_BOOTCOUNT_BOOTLIMIT=3
-CONFIG_SPL=y
-CONFIG_ENV_OFFSET_REDUND=0xB80000
-CONFIG_SPL_FS_FAT=y
-CONFIG_SPL_LIBDISK_SUPPORT=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI=y
-CONFIG_SYS_LOAD_ADDR=0x81000000
-CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_BOOTDELAY=3
-CONFIG_AUTOBOOT_KEYED=y
-CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
-CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
-CONFIG_BOOT_RETRY=y
-CONFIG_BOOT_RETRY_TIME=60
-CONFIG_RESET_TO_RETRY=y
-CONFIG_USE_PREBOOT=y
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_ARCH_MISC_INIT=y
-CONFIG_SPL_BSS_START_ADDR=0x80000000
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
-CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x80208000
-CONFIG_SPL_I2C=y
-CONFIG_SPL_NAND_DRIVERS=y
-CONFIG_SPL_NAND_ECC=y
-CONFIG_SPL_NAND_BASE=y
-CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_SPI_LOAD=y
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x20000
-CONFIG_SPL_WATCHDOG=y
-CONFIG_SPL_YMODEM_SUPPORT=y
-# CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_SYS_MAXARGS=32
-CONFIG_SYS_PBSIZE=1049
-CONFIG_CMD_ASKENV=y
-CONFIG_CMD_DFU=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_BOOTP_DNS2=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand2=omap2-nand_concat"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand_concat:512k(spl),512k(spl.backup1),512k(spl.backup2),512k(spl.backup3),7680k(u-boot),2048k(u-boot.env0),2048k(u-boot.env1),2048k(mtdoops),-(rootfs)"
-CONFIG_CMD_UBI=y
-CONFIG_OF_CONTROL=y
-CONFIG_SPL_OF_CONTROL=y
-CONFIG_OF_EMBED=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_ENV_RANGE=0x200000
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RETRY_COUNT=10
-CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_USE_ROOTPATH=y
-CONFIG_ROOTPATH="/opt/eldk"
-CONFIG_SPL_DM=y
-# CONFIG_SPL_BLK is not set
-CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_BOOTCOUNT_ENV=y
-CONFIG_DFU_NAND=y
-CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-# CONFIG_SPL_DM_MMC is not set
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_MAX_NAND_DEVICE=3
-CONFIG_NAND_OMAP_ECCSCHEME_BCH16_CODE_HW=y
-CONFIG_SYS_NAND_BLOCK_SIZE=0x80000
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_PAGE_SIZE=0x1000
-CONFIG_SYS_NAND_OOBSIZE=0xe0
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x200000
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_MTD_UBI_FASTMAP=y
-CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT=1
-CONFIG_PHY_SMSC=y
-CONFIG_DRIVER_TI_CPSW=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_OMAP3_SPI=y
-CONFIG_USB=y
-# CONFIG_SPL_DM_USB is not set
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_GADGET=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0908
-CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
-CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_USB_ETHER=y