turris_1x: Normalize Kconfig usage

We don't set many options in the board Kconfig entry file but instead
use defconfigs, select in some cases on the target itself, or update the
"default" options of the main entries when needed. In this case we can
remove most of the board Kconfig entries and just add them to the
defconfig like other platforms.

Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 47 insertions, 0 deletions

diff --git a/configs/turris_1x_sdcard_defconfig b/configs/turris_1x_sdcard_defconfig
index fb42e024c50..b402004f588 100644
--- a/configs/turris_1x_sdcard_defconfig
+++ b/configs/turris_1x_sdcard_defconfig
@@ -1,10 +1,20 @@
 CONFIG_PPC=y
 CONFIG_TEXT_BASE=0x11000000
 CONFIG_SYS_MALLOC_F_LEN=0x1000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=5
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_SPL_TEXT_BASE=0xf8f80000
 CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_SPL_MMC=y
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0xffe04500
+CONFIG_DEBUG_UART_CLOCK=37500000
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_ENV_ADDR=0xeff20000
 CONFIG_MPC85xx=y
 CONFIG_SYS_INIT_RAM_LOCK=y
 CONFIG_FSL_PREPBL_ESDHC_BOOT_SECTOR=y
@@ -16,6 +26,7 @@ CONFIG_SYS_MPC85XX_NO_RESETVEC=y
 CONFIG_SPL_SYS_MPC85XX_NO_RESETVEC=y
 CONFIG_DEBUG_UART=y
 CONFIG_AHCI=y
+CONFIG_OF_BOARD_FIXUP=y
 CONFIG_PCIE1=y
 CONFIG_PCIE2=y
 CONFIG_PCIE3=y
@@ -28,6 +39,8 @@ CONFIG_DISTRO_DEFAULTS=y
 CONFIG_BOOTDELAY=3
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_USE_PREBOOT=y
+CONFIG_PCI_INIT_R=y
+# CONFIG_SPL_FRAMEWORK is not set
 CONFIG_SPL_MAX_SIZE=0x80200
 CONFIG_SPL_PAD_TO=0x0
 CONFIG_SPL_MMC_BOOT=y
@@ -36,6 +49,9 @@ CONFIG_SPL_RELOC_STACK=0xf8f9d000
 CONFIG_SPL_RELOC_MALLOC=y
 CONFIG_SPL_RELOC_MALLOC_ADDR=0xf8fa5000
 CONFIG_SPL_RELOC_MALLOC_SIZE=0x5b000
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C=y
+CONFIG_SPL_MPC8XXX_INIT_DDR=y
 CONFIG_SPL_TARGET="u-boot-with-spl.bin"
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_IMLS=y
@@ -66,6 +82,9 @@ CONFIG_CMD_SQUASHFS=y
 CONFIG_CMD_FS_UUID=y
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_FLASH=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eth2"
 CONFIG_NETCONSOLE=y
@@ -73,6 +92,7 @@ CONFIG_SCSI_AHCI=y
 CONFIG_AHCI_PCI=y
 CONFIG_LBA48=y
 CONFIG_SYS_64BIT_LBA=y
+CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_CHIP_SELECTS_PER_CTRL=2
 CONFIG_SYS_BR0_PRELIM_BOOL=y
 CONFIG_SYS_BR0_PRELIM=0xef001001
@@ -84,15 +104,37 @@ CONFIG_SYS_BR3_PRELIM_BOOL=y
 CONFIG_SYS_BR3_PRELIM=0xffa00801
 CONFIG_SYS_OR3_PRELIM=0xfffe09f7
 CONFIG_DM_PCA953X=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_FSL_I2C_OFFSET=0x3000
+CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
+CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
+CONFIG_MISC=y
+CONFIG_ATSHA204A=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x52
+CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_EMPTY_INFO=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
 CONFIG_SYS_FLASH_QUIET_TEST=y
 CONFIG_SYS_MAX_FLASH_SECT=128
+CONFIG_MTD_RAW_NAND=y
+CONFIG_NAND_FSL_ELBC=y
+CONFIG_NAND_FSL_ELBC_DT=y
+CONFIG_PHY_FIXED=y
 CONFIG_DM_MDIO=y
+CONFIG_MII=y
+CONFIG_TSEC_ENET=y
 CONFIG_NVME_PCI=y
+CONFIG_PCIE_FSL=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_DS1307=y
 CONFIG_SCSI=y
@@ -102,5 +144,10 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_EHCI_FSL=y
 CONFIG_WDT=y
+CONFIG_WDT_MAX6370=y
 CONFIG_FAT_WRITE=y
+CONFIG_BCH=y