arm: Remove s32v234evb board

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Eddy Petrișor <eddy.petrisor@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 167 deletions

diff --git a/include/configs/s32v234evb.h b/include/configs/s32v234evb.h
deleted file mode 100644
index 275d92eff78..00000000000
--- a/include/configs/s32v234evb.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2015-2016 Freescale Semiconductor, Inc.
- *
- * Configuration settings for the Freescale S32V234 EVB board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/imx-regs.h>
-
-#define CONFIG_S32V234
-
-/* Config GIC */
-#define CONFIG_GICV2
-#define GICD_BASE 0x7D001000
-#define GICC_BASE 0x7D002000
-
-#define CONFIG_REMAKE_ELF
-#undef CONFIG_RUN_FROM_IRAM_ONLY
-
-#define CONFIG_RUN_FROM_DDR1
-#undef CONFIG_RUN_FROM_DDR0
-
-/* Run by default from DDR1  */
-#ifdef CONFIG_RUN_FROM_DDR0
-#define DDR_BASE_ADDR		0x80000000
-#else
-#define DDR_BASE_ADDR		0xC0000000
-#endif
-
-#define CONFIG_MACH_TYPE		4146
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* Enable passing of ATAGs */
-#define CONFIG_CMDLINE_TAG
-
-/* SMP Spin Table Definitions */
-#define CPU_RELEASE_ADDR                (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY               (1000000000)	/* 1000MHz */
-#define CONFIG_SYS_FSL_ERRATUM_A008585
-
-/* Size of malloc() pool */
-#ifdef CONFIG_RUN_FROM_IRAM_ONLY
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 1 * 1024 * 1024)
-#else
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
-#endif
-
-#define LINFLEXUART_BASE		LINFLEXD0_BASE_ADDR
-
-#define CONFIG_DEBUG_UART_LINFLEXUART
-#define CONFIG_DEBUG_UART_BASE		LINFLEXUART_BASE
-
-#define CONFIG_SYS_UART_PORT		(1)
-
-#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC_BASE_ADDR
-#define CONFIG_SYS_FSL_ESDHC_NUM	1
-
-#if 0
-
-/* Ethernet config */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE            ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE     RMII
-#define CONFIG_FEC_MXC_PHYADDR  0
-#endif
-
-#if 0				/* Disable until the FLASH will be implemented */
-#define CONFIG_SYS_USE_NAND
-#endif
-
-#ifdef CONFIG_SYS_USE_NAND
-/* Nand Flash Configs */
-#define CONFIG_JFFS2_NAND
-#define MTD_NAND_FSL_NFC_SWECC 1
-#define CONFIG_NAND_FSL_NFC
-#define CONFIG_SYS_NAND_BASE		0x400E0000
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS			CONFIG_SYS_MAX_NAND_DEVICE
-#define CONFIG_SYS_NAND_SELECT_DEVICE
-#define CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
-#endif
-
-#define CONFIG_LOADADDR			0xC307FFC0
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"boot_scripts=boot.scr.uimg boot.scr\0" \
-	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
-	"console=ttyLF0,115200\0" \
-	"fdt_file=s32v234-evb.dtb\0" \
-	"fdt_high=0xffffffff\0" \
-	"initrd_high=0xffffffff\0" \
-	"fdt_addr_r=0xC2000000\0" \
-	"kernel_addr_r=0xC307FFC0\0" \
-	"ramdisk_addr_r=0xC4000000\0" \
-	"ramdisk=rootfs.uimg\0"\
-	"ip_dyn=yes\0" \
-	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
-	"update_sd_firmware_filename=u-boot.imx\0" \
-	"update_sd_firmware=" \
-		"if test ${ip_dyn} = yes; then " \
-			"setenv get_cmd dhcp; " \
-		"else " \
-			"setenv get_cmd tftp; " \
-		"fi; " \
-		"if mmc dev ${mmcdev}; then "	\
-			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
-				"setexpr fw_sz ${filesize} / 0x200; " \
-				"setexpr fw_sz ${fw_sz} + 1; "	\
-				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
-			"fi; "	\
-		"fi\0" \
-	"loadramdisk=fatload mmc ${mmcdev}:${mmcpart} ${ramdisk_addr} ${ramdisk}\0" \
-	"jtagboot=echo Booting using jtag...; " \
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
-	"jtagsdboot=echo Booting loading Linux with ramdisk from SD...; " \
-		"run loaduimage; run loadramdisk; run loadfdt;"\
-		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
-	"boot_net_usb_start=true\0" \
-	BOOTENV
-
-#define BOOT_TARGET_DEVICES(func) \
-	func(MMC, mmc, 1) \
-	func(MMC, mmc, 0) \
-	func(DHCP, dhcp, na)
-
-#define CONFIG_BOOTCOMMAND \
-	"run distro_bootcmd"
-
-#include <config_distro_bootcmd.h>
-#include <linux/stringify.h>
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT		"=> "
-
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
-#define CONFIG_SYS_HZ				1000
-
-#ifdef CONFIG_RUN_FROM_IRAM_ONLY
-#define CONFIG_SYS_MALLOC_BASE		(DDR_BASE_ADDR)
-#endif
-
-/* Physical memory map */
-/* EVB board has 2x256 MB DDR chips, DDR0 and DDR1, u-boot is using just one */
-#define PHYS_SDRAM			(DDR_BASE_ADDR)
-#define PHYS_SDRAM_SIZE			(256 * 1024 * 1024)
-
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
-/* environment organization */
-
-
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-#endif