diff options
| author | Svyatoslav Ryhel <clamor95@gmail.com> | 2023-06-30 10:29:06 +0300 |
|---|---|---|
| committer | Thierry Reding <treding@nvidia.com> | 2023-06-30 15:20:37 +0200 |
| commit | bdf9dead86f06c7d6980c399a4a6339430b531ec (patch) | |
| tree | 21c4fa27edd470b596d44f4afdac0cee239645ad /include/configs | |
| parent | 623a8c812e127c4f008dfbb60f29edc8c7d94e09 (diff) | |
| download | u-boot-bdf9dead86f06c7d6980c399a4a6339430b531ec.tar.gz | |
board: htc: endeavoru: add One X support
The HTC One X is a touchscreen-based, slate-sized smartphone
designed and manufactured by HTC that runs the Android operating
system. The One X features a 4.7" display, an Nvidia Tegra 3
quad-core chip, 1 GB of RAM and non-extendable 32 GB of internal
storage. UART-A is default debug port.
Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com>
Tested-by: Ion Agorria <ion@agorria.com>
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/endeavoru.h | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/include/configs/endeavoru.h b/include/configs/endeavoru.h new file mode 100644 index 00000000000..46c582e963e --- /dev/null +++ b/include/configs/endeavoru.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2010,2012 + * NVIDIA Corporation <www.nvidia.com> + * + * (C) Copyright 2022 + * Svyatoslav Ryhel <clamor95@gmail.com> + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <linux/sizes.h> + +#include "tegra30-common.h" + +/* High-level configuration options */ +#define CFG_TEGRA_BOARD_STRING "HTC One X" + +#define ENDEAVORU_FLASH_UBOOT \ + "flash_uboot=echo Preparing RAM;" \ + "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \ + "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \ + "echo Reading BCT;" \ + "mmc dev 0 1;" \ + "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \ + "echo Reading bootloader;" \ + "if load mmc 0:1 ${ramdisk_addr_r} ${bootloader_file};" \ + "then echo Calculating bootloader size;" \ + "size mmc 0:1 ${bootloader_file};" \ + "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \ + "echo Writing bootloader to eMMC;" \ + "mmc dev 0 1;" \ + "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \ + "mmc dev 0 2;" \ + "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \ + "echo Bootloader written successfully;" \ + "pause 'Press ANY key to reboot device...'; reset;" \ + "else echo Reading bootloader failed;" \ + "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0" + +#define ENDEAVORU_BOOTMENU \ + ENDEAVORU_FLASH_UBOOT \ + "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \ + "bootmenu_1=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \ + "bootmenu_2=update bootloader=run flash_uboot\0" \ + "bootmenu_3=reboot RCM=enterrcm\0" \ + "bootmenu_4=reboot=reset\0" \ + "bootmenu_5=power off=poweroff\0" \ + "bootmenu_delay=-1\0" + +#define BOARD_EXTRA_ENV_SETTINGS \ + "boot_block_size_r=0x200000\0" \ + "boot_block_size=0x1000\0" \ + "bootloader_file=u-boot-dtb-tegra.bin\0" \ + "check_button=gpio input 179; test $? -eq 0\0" \ + "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \ + ENDEAVORU_BOOTMENU + +/* Board-specific serial config */ +#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ |