Merge tag 'u-boot-imx-20211022' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

u-boot-imx-20211022
-------------------

CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/9561

- i.MX8:
	- Toradex Verdin (switch to binman, cleanup, etc.)
	- Phytec phycore_imx8mm (fixes, boot from SPI-NOR)
	- fixes for imx8mp_evk
- doc (i.MX): MX8MM with Fast boot
- i.MX6:
	- Toradex : colibri-imx6ull with eMMC, fixes
- i.MX7ULP :
	- preparation for OPTEE + Serial Number
- generic:
	- imx8m_image: Support ddr3 firmware

5 files changed, 52 insertions, 38 deletions

diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h
index 80594548877..ce5681499c9 100644
--- a/include/configs/apalis-imx8.h
+++ b/include/configs/apalis-imx8.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2019 Toradex
+ * Copyright 2019-2021 Toradex
  */
 
 #ifndef __APALIS_IMX8_H
@@ -42,12 +42,12 @@
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
+	"boot_file=Image\0" \
 	"console=ttyLP1 earlycon\0" \
 	"fdt_addr=0x83000000\0"	\
 	"fdt_file=fsl-imx8qm-apalis-eval.dtb\0" \
 	"fdtfile=fsl-imx8qm-apalis-eval.dtb\0" \
 	"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
-	"image=Image\0" \
 	"initrd_addr=0x83800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -57,7 +57,7 @@
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
 		"\0" \
-	"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; tftp ${fdt_addr} " \
 		"apalis-imx8/${fdt_file}; booti ${loadaddr} - ${fdt_addr}\0" \
 	"panel=NULL\0" \
 	"script=boot.scr\0" \
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 741c3fedec9..6b3e1c665a0 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018-2019 Toradex AG
+ * Copyright 2018-2021 Toradex AG
  *
  * Configuration settings for the Colibri iMX6ULL module.
  *
@@ -13,7 +13,7 @@
 #include "mx6_common.h"
 #define CONFIG_IOMUX_LPSR
 
-#define PHYS_SDRAM_SIZE			SZ_512M
+#define PHYS_SDRAM_SIZE			SZ_1G
 
 /* ENET1 */
 #define IMX_FEC_BASE			ENET2_BASE_ADDR
@@ -26,6 +26,22 @@
 #define CONFIG_NETMASK			255.255.255.0
 #define CONFIG_SERVERIP			192.168.10.1
 
+#if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC)
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=2\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0"
+#elif defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND)
+#define UBOOT_UPDATE \
+	"update_uboot=nand erase.part u-boot1 && " \
+		"nand write ${loadaddr} u-boot1 ${filesize} && " \
+		"nand erase.part u-boot2 && " \
+		"nand write ${loadaddr} u-boot2 ${filesize}\0"
+#endif
+
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82100000\0" \
@@ -34,12 +50,6 @@
 	"ramdisk_addr_r=0x82200000\0" \
 	"scriptaddr=0x87000000\0"
 
-#define UBOOT_UPDATE \
-	"update_uboot=nand erase.part u-boot1 && " \
-		"nand write ${loadaddr} u-boot1 ${filesize} && " \
-		"nand erase.part u-boot2 && " \
-		"nand write ${loadaddr} u-boot2 ${filesize}\0"
-
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 	"nfsboot=run setup; " \
@@ -60,17 +70,32 @@
 		"ubi read ${fdt_addr_r} dtb && " \
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
+#if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND)
 /* Run Distro Boot script if ubiboot fails */
 #define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;"
+#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
+#define MODULE_EXTRA_ENV_SETTINGS \
+	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	UBI_BOOTCMD
+#else
+#define	MODULE_EXTRA_ENV_SETTINGS ""
+#endif
 
+#if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND)
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
+#elif defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC)
 #define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
+#endif
 #include <config_distro_bootcmd.h>
 
-#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
@@ -80,12 +105,10 @@
 	"bootubipart=ubi\0" \
 	"console=ttymxc0\0" \
 	"defargs=user_debug=30\0" \
-	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
 	"fdt_fixup=;\0" \
 	"ip_dyn=yes\0" \
 	"kernel_file=zImage\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -117,10 +140,16 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
+/* environment organization */
+
+/* Environment in eMMC, before config block at the end of 1st "boot sector" */
+
+#ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
 #define CONFIG_SYS_NAND_BASE		-1
+#endif
 
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h
index bec6c1d8e9c..2427603d008 100644
--- a/include/configs/imx8mp_evk.h
+++ b/include/configs/imx8mp_evk.h
@@ -43,9 +43,6 @@
 #define FEC_QUIRK_ENET_MAC
 
 #define DWC_NET_PHYADDR			1
-#ifdef CONFIG_DWC_ETH_QOS
-#define CONFIG_SYS_NONCACHED_MEMORY     (1 * SZ_1M)     /* 1M */
-#endif
 
 #define PHY_ANEG_TIMEOUT 20000
 
diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h
index 8d1fd153f62..e74f2b27954 100644
--- a/include/configs/phycore_imx8mm.h
+++ b/include/configs/phycore_imx8mm.h
@@ -37,10 +37,7 @@
 	"console=ttymxc2,115200\0" \
 	"fdt_addr=0x48000000\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"ipaddr=192.168.3.11\0" \
-	"serverip=192.168.3.10\0" \
-	"netmask=255.225.255.0\0" \
-	"ip_dyn=no\0" \
+	"ip_dyn=yes\0" \
 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
 	"mmcroot=2\0" \
@@ -94,30 +91,21 @@
 
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 
-#define PHYS_SDRAM			SZ_1G
+#define PHYS_SDRAM			0x40000000
 #define PHYS_SDRAM_SIZE                 SZ_2G /* 2GB DDR */
 
 /* UART */
 #define CONFIG_MXC_UART_BASE		UART3_BASE_ADDR
 
 /* Monitor Command Prompt */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_CBSIZE		SZ_2K
 #define CONFIG_SYS_MAXARGS		64
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
+
 /* USDHC */
 #define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 #define CONFIG_SYS_MMC_IMG_LOAD_PART	1
 
-/* ENET1 */
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_FEC_MXC_PHYADDR		0
-#define FEC_QUIRK_ENET_MAC
-#define IMX_FEC_BASE			0x30BE0000
-
 #endif /* __PHYCORE_IMX8MM_H */
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
index 50c808383db..693fd6907eb 100644
--- a/include/configs/verdin-imx8mm.h
+++ b/include/configs/verdin-imx8mm.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 Toradex
+ * Copyright 2020-2021 Toradex
  */
 
 #ifndef __VERDIN_IMX8MM_H
@@ -54,16 +54,16 @@
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
 	"bootcmd_mfg=fastboot 0\0" \
+	"boot_file=Image\0" \
 	"console=ttymxc0\0" \
 	"fdt_addr=0x43000000\0" \
-	"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+	"fdt_board=dev\0" \
 	"initrd_addr=0x43800000\0" \
 	"initrd_high=0xffffffffffffffff\0" \
-	"kernel_image=Image\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \
 		"\0" \
-	"nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \
+	"nfsboot=run netargs; dhcp ${loadaddr} ${boot_file}; " \
 		"tftp ${fdt_addr} verdin/${fdtfile}; " \
 		"booti ${loadaddr} - ${fdt_addr}\0" \
 	"setup=setenv setupargs console=${console},${baudrate} " \
@@ -118,4 +118,4 @@
 #define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
-#endif /*_VERDIN_IMX8MM_H */
+#endif /* __VERDIN_IMX8MM_H */