diff options
Diffstat (limited to 'arch/arm/dts/r8a7793-gose.dts')
| -rw-r--r-- | arch/arm/dts/r8a7793-gose.dts | 818 |
1 files changed, 0 insertions, 818 deletions
diff --git a/arch/arm/dts/r8a7793-gose.dts b/arch/arm/dts/r8a7793-gose.dts deleted file mode 100644 index 79b537b2464..00000000000 --- a/arch/arm/dts/r8a7793-gose.dts +++ /dev/null @@ -1,818 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for the Gose board - * - * Copyright (C) 2014-2015 Renesas Electronics Corporation - */ - -/* - * SSI-AK4643 - * - * SW1: 1: AK4643 - * 2: CN22 - * 3: ADV7511 - * - * This command is required when Playback/Capture - * - * amixer set "LINEOUT Mixer DACL" on - * amixer set "DVC Out" 100% - * amixer set "DVC In" 100% - * - * You can use Mute - * - * amixer set "DVC Out Mute" on - * amixer set "DVC In Mute" on - * - * You can use Volume Ramp - * - * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps" - * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps" - * amixer set "DVC Out Ramp" on - * aplay xxx.wav & - * amixer set "DVC Out" 80% // Volume Down - * amixer set "DVC Out" 100% // Volume Up - */ - -/dts-v1/; -#include "r8a7793.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> - -/ { - model = "Gose"; - compatible = "renesas,gose", "renesas,r8a7793"; - - aliases { - serial0 = &scif0; - serial1 = &scif1; - i2c9 = &gpioi2c2; - i2c10 = &gpioi2c4; - i2c11 = &i2chdmi; - i2c12 = &i2cexio4; - mmc0 = &sdhi0; - mmc1 = &sdhi1; - mmc2 = &sdhi2; - }; - - chosen { - bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; - stdout-path = "serial0:115200n8"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x40000000>; - }; - - keyboard { - compatible = "gpio-keys"; - - pinctrl-0 = <&keyboard_pins>; - pinctrl-names = "default"; - - key-1 { - gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_1>; - label = "SW2-1"; - wakeup-source; - debounce-interval = <20>; - }; - key-2 { - gpios = <&gpio5 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_2>; - label = "SW2-2"; - wakeup-source; - debounce-interval = <20>; - }; - key-3 { - gpios = <&gpio5 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_3>; - label = "SW2-3"; - wakeup-source; - debounce-interval = <20>; - }; - key-4 { - gpios = <&gpio5 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_4>; - label = "SW2-4"; - wakeup-source; - debounce-interval = <20>; - }; - key-a { - gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_A>; - label = "SW30"; - wakeup-source; - debounce-interval = <20>; - }; - key-b { - gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_B>; - label = "SW31"; - wakeup-source; - debounce-interval = <20>; - }; - key-c { - gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_C>; - label = "SW32"; - wakeup-source; - debounce-interval = <20>; - }; - key-d { - gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_D>; - label = "SW33"; - wakeup-source; - debounce-interval = <20>; - }; - key-e { - gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_E>; - label = "SW34"; - wakeup-source; - debounce-interval = <20>; - }; - key-f { - gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_F>; - label = "SW35"; - wakeup-source; - debounce-interval = <20>; - }; - key-g { - gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; - linux,code = <KEY_G>; - label = "SW36"; - wakeup-source; - debounce-interval = <20>; - }; - }; - - leds { - compatible = "gpio-leds"; - led6 { - gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; - label = "LED6"; - }; - led7 { - gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; - label = "LED7"; - }; - led8 { - gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; - label = "LED8"; - }; - }; - - vcc_sdhi0: regulator-vcc-sdhi0 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI0 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi0: regulator-vccq-sdhi0 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI0 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vcc_sdhi1: regulator-vcc-sdhi1 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI1 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi1: regulator-vccq-sdhi1 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI1 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - vcc_sdhi2: regulator-vcc-sdhi2 { - compatible = "regulator-fixed"; - - regulator-name = "SDHI2 Vcc"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - vccq_sdhi2: regulator-vccq-sdhi2 { - compatible = "regulator-gpio"; - - regulator-name = "SDHI2 VccQ"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; - gpios-states = <1>; - states = <3300000 1>, <1800000 0>; - }; - - audio_clock: audio_clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <11289600>; - }; - - rsnd_ak4643: sound { - compatible = "simple-audio-card"; - - simple-audio-card,format = "left_j"; - simple-audio-card,bitclock-master = <&sndcodec>; - simple-audio-card,frame-master = <&sndcodec>; - - sndcpu: simple-audio-card,cpu { - sound-dai = <&rcar_sound>; - }; - - sndcodec: simple-audio-card,codec { - sound-dai = <&ak4643>; - clocks = <&audio_clock>; - }; - }; - - hdmi-in { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_in: endpoint { - remote-endpoint = <&adv7612_in>; - }; - }; - }; - - hdmi-out { - compatible = "hdmi-connector"; - type = "a"; - - port { - hdmi_con_out: endpoint { - remote-endpoint = <&adv7511_out>; - }; - }; - }; - - composite-in { - compatible = "composite-video-connector"; - - port { - composite_con_in: endpoint { - remote-endpoint = <&adv7180_in>; - }; - }; - }; - - x2_clk: x2-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <74250000>; - }; - - x13_clk: x13-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <148500000>; - }; - - gpioi2c2: i2c-9 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - status = "disabled"; - scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <5>; - }; - - gpioi2c4: i2c-10 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "i2c-gpio"; - status = "disabled"; - scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; - i2c-gpio,delay-us = <5>; - }; - - /* - * A fallback to GPIO is provided for I2C2. - */ - i2chdmi: i2c-11 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&i2c2>, <&gpioi2c2>; - i2c-bus-name = "i2c-hdmi"; - #address-cells = <1>; - #size-cells = <0>; - - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - #sound-dai-cells = <0>; - reg = <0x12>; - }; - - composite-in@20 { - compatible = "adi,adv7180cp"; - reg = <0x20>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7180_in: endpoint { - remote-endpoint = <&composite_con_in>; - }; - }; - - port@3 { - reg = <3>; - adv7180_out: endpoint { - bus-width = <8>; - remote-endpoint = <&vin1ep>; - }; - }; - }; - }; - - hdmi@39 { - compatible = "adi,adv7511w"; - reg = <0x39>; - interrupt-parent = <&gpio3>; - interrupts = <29 IRQ_TYPE_LEVEL_LOW>; - - adi,input-depth = <8>; - adi,input-colorspace = "rgb"; - adi,input-clock = "1x"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7511_in: endpoint { - remote-endpoint = <&du_out_rgb>; - }; - }; - - port@1 { - reg = <1>; - adv7511_out: endpoint { - remote-endpoint = <&hdmi_con_out>; - }; - }; - }; - }; - - hdmi-in@4c { - compatible = "adi,adv7612"; - reg = <0x4c>; - interrupt-parent = <&gpio4>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - default-input = <0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - adv7612_in: endpoint { - remote-endpoint = <&hdmi_con_in>; - }; - }; - - port@2 { - reg = <2>; - adv7612_out: endpoint { - remote-endpoint = <&vin0ep2>; - }; - }; - }; - }; - - eeprom@50 { - compatible = "renesas,r1ex24002", "atmel,24c02"; - reg = <0x50>; - pagesize = <16>; - }; - }; - - /* - * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA). - * A fallback to GPIO is provided. - */ - i2cexio4: i2c-12 { - compatible = "i2c-demux-pinctrl"; - i2c-parent = <&i2c4>, <&gpioi2c4>; - i2c-bus-name = "i2c-exio4"; - #address-cells = <1>; - #size-cells = <0>; - }; -}; - -&du { - pinctrl-0 = <&du_pins>; - pinctrl-names = "default"; - status = "okay"; - - clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, - <&x13_clk>, <&x2_clk>; - clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1"; - - ports { - port@0 { - endpoint { - remote-endpoint = <&adv7511_in>; - }; - }; - }; -}; - -&lvds0 { - ports { - port@1 { - lvds_connector: endpoint { - }; - }; - }; -}; - -&extal_clk { - clock-frequency = <20000000>; -}; - -&pfc { - pinctrl-0 = <&scif_clk_pins>; - pinctrl-names = "default"; - - i2c2_pins: i2c2 { - groups = "i2c2"; - function = "i2c2"; - }; - - i2c4_pins: i2c4 { - groups = "i2c4_c"; - function = "i2c4"; - }; - - du_pins: du { - groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0"; - function = "du"; - }; - - scif0_pins: scif0 { - groups = "scif0_data_d"; - function = "scif0"; - }; - - scif1_pins: scif1 { - groups = "scif1_data_d"; - function = "scif1"; - }; - - scif_clk_pins: scif_clk { - groups = "scif_clk"; - function = "scif_clk"; - }; - - ether_pins: ether { - groups = "eth_link", "eth_mdio", "eth_rmii"; - function = "eth"; - }; - - phy1_pins: phy1 { - groups = "intc_irq0"; - function = "intc"; - }; - - pmic_irq_pins: pmicirq { - groups = "intc_irq2"; - function = "intc"; - }; - - sdhi0_pins: sd0 { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <3300>; - }; - - sdhi0_pins_uhs: sd0_uhs { - groups = "sdhi0_data4", "sdhi0_ctrl"; - function = "sdhi0"; - power-source = <1800>; - }; - - sdhi1_pins: sd1 { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <3300>; - }; - - sdhi1_pins_uhs: sd1_uhs { - groups = "sdhi1_data4", "sdhi1_ctrl"; - function = "sdhi1"; - power-source = <1800>; - }; - - sdhi2_pins: sd2 { - groups = "sdhi2_data4", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <3300>; - }; - - sdhi2_pins_uhs: sd2_uhs { - groups = "sdhi2_data4", "sdhi2_ctrl"; - function = "sdhi2"; - power-source = <1800>; - }; - - qspi_pins: qspi { - groups = "qspi_ctrl", "qspi_data4"; - function = "qspi"; - }; - - sound_pins: sound { - groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data"; - function = "ssi"; - }; - - sound_clk_pins: sound_clk { - groups = "audio_clk_a"; - function = "audio_clk"; - }; - - keyboard_pins: keyboard { - pins = "GP_5_0", "GP_5_1", "GP_5_2", "GP_5_3"; - bias-pull-up; - }; - - vin0_pins: vin0 { - groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; - function = "vin0"; - }; - - vin1_pins: vin1 { - groups = "vin1_data8", "vin1_clk"; - function = "vin1"; - }; -}; - -ðer { - pinctrl-0 = <ðer_pins>, <&phy1_pins>; - pinctrl-names = "default"; - - phy-handle = <&phy1>; - renesas,ether-link-active-low; - status = "okay"; - - phy1: ethernet-phy@1 { - compatible = "ethernet-phy-id0022.1537", - "ethernet-phy-ieee802.3-c22"; - reg = <1>; - interrupt-parent = <&irqc0>; - interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - micrel,led-mode = <1>; - reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>; - }; -}; - -&cmt0 { - status = "okay"; -}; - -&cpu0 { - cpu0-supply = <&vdd_dvfs>; -}; - -&rwdt { - timeout-sec = <60>; - status = "okay"; -}; - -&scif0 { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif1 { - pinctrl-0 = <&scif1_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&scif_clk { - clock-frequency = <14745600>; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-1 = <&sdhi0_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi0>; - vqmmc-supply = <&vccq_sdhi0>; - cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - sd-uhs-sdr104; - status = "okay"; -}; - -&sdhi1 { - pinctrl-0 = <&sdhi1_pins>; - pinctrl-1 = <&sdhi1_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi1>; - vqmmc-supply = <&vccq_sdhi1>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; - wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>; - sd-uhs-sdr50; - status = "okay"; -}; - -&sdhi2 { - pinctrl-0 = <&sdhi2_pins>; - pinctrl-1 = <&sdhi2_pins_uhs>; - pinctrl-names = "default", "state_uhs"; - - vmmc-supply = <&vcc_sdhi2>; - vqmmc-supply = <&vccq_sdhi2>; - cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; - sd-uhs-sdr50; - status = "okay"; -}; - -&qspi { - pinctrl-0 = <&qspi_pins>; - pinctrl-names = "default"; - - status = "okay"; - - flash@0 { - compatible = "spansion,s25fl512s", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <30000000>; - spi-tx-bus-width = <4>; - spi-rx-bus-width = <4>; - spi-cpol; - spi-cpha; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "loader"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "user"; - reg = <0x00040000 0x00400000>; - read-only; - }; - partition@440000 { - label = "flash"; - reg = <0x00440000 0x03bc0000>; - }; - }; - }; -}; - -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "i2c-hdmi"; - - status = "okay"; - clock-frequency = <100000>; - -}; - -&i2c6 { - pinctrl-names = "default"; - pinctrl-0 = <&pmic_irq_pins>; - status = "okay"; - clock-frequency = <100000>; - - pmic@58 { - compatible = "dlg,da9063"; - reg = <0x58>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9063-rtc"; - }; - - watchdog { - compatible = "dlg,da9063-watchdog"; - }; - }; - - vdd_dvfs: regulator@68 { - compatible = "dlg,da9210"; - reg = <0x68>; - interrupt-parent = <&irqc0>; - interrupts = <2 IRQ_TYPE_LEVEL_LOW>; - - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-boot-on; - regulator-always-on; - }; -}; - -&i2c4 { - pinctrl-0 = <&i2c4_pins>; - pinctrl-names = "i2c-exio4"; -}; - -&rcar_sound { - pinctrl-0 = <&sound_pins>, <&sound_clk_pins>; - pinctrl-names = "default"; - - /* Single DAI */ - #sound-dai-cells = <0>; - - status = "okay"; - - rcar_sound,dai { - dai0 { - playback = <&ssi0>, <&src2>, <&dvc0>; - capture = <&ssi1>, <&src3>, <&dvc1>; - }; - }; -}; - -&ssi1 { - shared-pin; -}; - -/* HDMI video input */ -&vin0 { - status = "okay"; - pinctrl-0 = <&vin0_pins>; - pinctrl-names = "default"; - - port { - vin0ep2: endpoint { - remote-endpoint = <&adv7612_out>; - bus-width = <24>; - hsync-active = <0>; - vsync-active = <0>; - pclk-sample = <1>; - data-active = <1>; - }; - }; -}; - -/* composite video input */ -&vin1 { - pinctrl-0 = <&vin1_pins>; - pinctrl-names = "default"; - - status = "okay"; - - port { - vin1ep: endpoint { - remote-endpoint = <&adv7180_out>; - bus-width = <8>; - }; - }; -}; |