diff options
Diffstat (limited to 'arch/arm')
37 files changed, 1163 insertions, 1616 deletions
diff --git a/arch/arm/dts/imx7d-sdb-u-boot.dtsi b/arch/arm/dts/imx7d-sdb-u-boot.dtsi index b78358fa139..ac1d6e2e648 100644 --- a/arch/arm/dts/imx7d-sdb-u-boot.dtsi +++ b/arch/arm/dts/imx7d-sdb-u-boot.dtsi @@ -5,3 +5,54 @@ &usbotg1 { dr_mode = "peripheral"; }; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>; +}; + +&pinctrl_usdhc1 { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x59 + MX7D_PAD_SD1_CLK__SD1_CLK 0x19 + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 + >; +}; + +&iomuxc { + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x59 /* CD */ + MX7D_PAD_SD1_WP__GPIO5_IO1 0x59 /* WP */ + MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x59 /* vmmc */ + MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x59 /* VSELECT */ + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1100mhzgrp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5a + MX7D_PAD_SD1_CLK__SD1_CLK 0x1a + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5a + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5a + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5a + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5a + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1200mhzgrp { + fsl,pins = < + MX7D_PAD_SD1_CMD__SD1_CMD 0x5b + MX7D_PAD_SD1_CLK__SD1_CLK 0x1b + MX7D_PAD_SD1_DATA0__SD1_DATA0 0x5b + MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5b + MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5b + MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5b + >; + }; +}; diff --git a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi index 89e64344c6d..5b465e2dbd9 100644 --- a/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi +++ b/arch/arm/dts/imx93-11x11-evk-u-boot.dtsi @@ -10,25 +10,6 @@ bootph-pre-ram; }; - aliases { - usbgadget0 = &usbg1; - usbgadget1 = &usbg2; - }; - - usbg1: usbg1 { - compatible = "fsl,imx27-usb-gadget"; - dr_mode = "peripheral"; - chipidea,usb = <&usbotg1>; - status = "okay"; - }; - - usbg2: usbg2 { - compatible = "fsl,imx27-usb-gadget"; - dr_mode = "peripheral"; - chipidea,usb = <&usbotg2>; - status = "okay"; - }; - firmware { optee { compatible = "linaro,optee-tz"; @@ -141,16 +122,6 @@ reset-deassert-us = <100000>; }; -&usbotg1 { - status = "okay"; - extcon = <&ptn5110>; -}; - -&usbotg2 { - status = "okay"; - extcon = <&ptn5110_2>; -}; - &s4muap { bootph-pre-ram; status = "okay"; diff --git a/arch/arm/dts/imx93-11x11-evk.dts b/arch/arm/dts/imx93-11x11-evk.dts index b3a5a3d71e2..4322cc3e11b 100644 --- a/arch/arm/dts/imx93-11x11-evk.dts +++ b/arch/arm/dts/imx93-11x11-evk.dts @@ -1,36 +1,25 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright 2021 NXP + * Copyright 2022 NXP */ /dts-v1/; #include "imx93.dtsi" -/{ +/ { + model = "NXP i.MX93 11X11 EVK board"; + compatible = "fsl,imx93-11x11-evk", "fsl,imx93"; + chosen { stdout-path = &lpuart1; }; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; - - audio: audio@a4120000 { - compatible = "shared-dma-pool"; - reg = <0 0xa4120000 0 0x100000>; - no-map; - }; - }; - - reg_can2_stby: regulator-can2-stby { + reg_vref_1v8: regulator-adc-vref { compatible = "regulator-fixed"; - regulator-name = "can2-stby"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&adp5585gpio 5 GPIO_ACTIVE_LOW>; - enable-active-low; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; }; reg_usdhc2_vmmc: regulator-usdhc2 { @@ -43,81 +32,57 @@ gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; enable-active-high; }; +}; - usdhc3_pwrseq: usdhc3_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&pcal6524 20 GPIO_ACTIVE_LOW>; - }; - - reg_vref_1v8: regulator-adc-vref { - compatible = "regulator-fixed"; - regulator-name = "vref_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; +&adc1 { + vref-supply = <®_vref_1v8>; + status = "okay"; +}; +&mu1 { + status = "okay"; }; -&lpi2c1 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_lpi2c1>; - pinctrl-1 = <&pinctrl_lpi2c1>; +&mu2 { status = "okay"; +}; - ptn5110: tcpc@50 { - compatible = "nxp,ptn5110"; - reg = <0x50>; - interrupt-parent = <&pcal6524>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - status = "okay"; +&eqos { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eqos>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy1>; + status = "okay"; - port { - typec1_dr_sw: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <5000000>; - typec1_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - data-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 20000, 3000)>; - op-sink-microwatt = <15000000>; - self-powered; + ethphy1: ethernet-phy@1 { + reg = <1>; + eee-broken-1000t; }; }; +}; - ptn5110_2: tcpc@51 { - compatible = "nxp,ptn5110"; - reg = <0x51>; - interrupt-parent = <&pcal6524>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; - status = "okay"; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii-id"; + phy-handle = <ðphy2>; + fsl,magic-packet; + status = "okay"; - port { - typec2_dr_sw: endpoint { - remote-endpoint = <&usb2_drd_sw>; - }; - }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <5000000>; - typec2_con: connector { - compatible = "usb-c-connector"; - label = "USB-C"; - power-role = "dual"; - data-role = "dual"; - try-power-role = "sink"; - source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>; - sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM) - PDO_VAR(5000, 20000, 3000)>; - op-sink-microwatt = <15000000>; - self-powered; + ethphy2: ethernet-phy@2 { + reg = <2>; + eee-broken-1000t; }; }; }; @@ -134,15 +99,14 @@ pmic@25 { compatible = "nxp,pca9451a"; reg = <0x25>; - pinctrl-names = "default"; interrupt-parent = <&pcal6524>; - interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; regulators { buck1: BUCK1 { regulator-name = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <2237500>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; @@ -189,22 +153,6 @@ regulator-always-on; }; - ldo2: LDO2 { - regulator-name = "LDO2"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo3: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - ldo4: LDO4 { regulator-name = "LDO4"; regulator-min-microvolt = <800000>; @@ -250,48 +198,6 @@ status = "okay"; }; -&lpuart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; - status = "disabled"; -}; - -&usbotg1 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - disable-over-current; - samsung,picophy-pre-emp-curr-control = <3>; - samsung,picophy-dc-vol-level-adjust = <7>; - status = "okay"; - - port { - usb1_drd_sw: endpoint { - remote-endpoint = <&typec1_dr_sw>; - }; - }; -}; - -&usbotg2 { - dr_mode = "otg"; - hnp-disable; - srp-disable; - adp-disable; - usb-role-switch; - disable-over-current; - samsung,picophy-pre-emp-curr-control = <3>; - samsung,picophy-dc-vol-level-adjust = <7>; - status = "okay"; - - port { - usb2_drd_sw: endpoint { - remote-endpoint = <&typec2_dr_sw>; - }; - }; -}; - &usdhc1 { pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc1>; @@ -315,116 +221,17 @@ no-mmc; }; -&usdhc3 { - status = "disabled"; -}; - -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy2>; - fsl,magic-packet; - status = "okay"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <5000000>; - - ethphy2: ethernet-phy@2 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <2>; - eee-broken-1000t; - rtl821x,aldps-disable; - rtl821x,clkout-disable; - }; - }; -}; - -&eqos { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_eqos>; - phy-mode = "rgmii-id"; - phy-handle = <ðphy1>; - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <5000000>; - - ethphy1: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - eee-broken-1000t; - rtl821x,aldps-disable; - rtl821x,clkout-disable; - }; - }; -}; - -&flexspi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexspi>; - status = "disabled"; - - flash0: flash@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <80000000>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <1>; - }; -}; - &iomuxc { - pinctrl-names = "default"; - status = "okay"; - - pinctrl_flexcan2: flexcan2grp { - fsl,pins = < - MX93_PAD_GPIO_IO25__CAN2_TX 0x139e - MX93_PAD_GPIO_IO27__CAN2_RX 0x139e - >; - }; - - pinctrl_flexspi: flexspigrp { + pinctrl_lpi2c2: lpi2c2grp { fsl,pins = < - MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x42 - MX93_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B 0x42 - MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x42 - MX93_PAD_SD1_STROBE__FLEXSPI1_A_DQS 0x42 - MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x42 - MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x42 - MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x42 - MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x42 - MX93_PAD_SD1_DATA4__FLEXSPI1_A_DATA04 0x42 - MX93_PAD_SD1_DATA5__FLEXSPI1_A_DATA05 0x42 - MX93_PAD_SD1_DATA6__FLEXSPI1_A_DATA06 0x42 - MX93_PAD_SD1_DATA7__FLEXSPI1_A_DATA07 0x42 + MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e + MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e >; }; - pinctrl_fec: fecgrp { + pinctrl_pcal6524: pcal6524grp { fsl,pins = < - MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e - MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e - MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e - MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e - MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e - MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e - MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe - MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e - MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e - MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e - MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e - MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e - MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe - MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e + MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e >; }; @@ -447,23 +254,22 @@ >; }; - pinctrl_lpi2c1: lpi2c1grp { - fsl,pins = < - MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e - MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e - >; - }; - - pinctrl_lpi2c2: lpi2c2grp { - fsl,pins = < - MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x40000b9e - MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x40000b9e - >; - }; - - pinctrl_pcal6524: pcal6524grp { + pinctrl_fec: fecgrp { fsl,pins = < - MX93_PAD_CCM_CLKO2__GPIO3_IO27 0x31e + MX93_PAD_ENET2_MDC__ENET1_MDC 0x57e + MX93_PAD_ENET2_MDIO__ENET1_MDIO 0x57e + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e >; }; @@ -474,54 +280,43 @@ >; }; - pinctrl_uart2: uart2grp { - fsl,pins = < - MX93_PAD_UART2_TXD__LPUART2_TX 0x31e - MX93_PAD_UART2_RXD__LPUART2_RX 0x31e - >; - }; - pinctrl_usdhc1: usdhc1grp { fsl,pins = < - MX93_PAD_SD1_CLK__USDHC1_CLK 0x17fe - MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe - MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe - MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe - MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe - MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe - MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe - MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe - MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe - MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe - MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x17fe + MX93_PAD_SD1_CLK__USDHC1_CLK 0x15fe + MX93_PAD_SD1_CMD__USDHC1_CMD 0x13fe + MX93_PAD_SD1_DATA0__USDHC1_DATA0 0x13fe + MX93_PAD_SD1_DATA1__USDHC1_DATA1 0x13fe + MX93_PAD_SD1_DATA2__USDHC1_DATA2 0x13fe + MX93_PAD_SD1_DATA3__USDHC1_DATA3 0x13fe + MX93_PAD_SD1_DATA4__USDHC1_DATA4 0x13fe + MX93_PAD_SD1_DATA5__USDHC1_DATA5 0x13fe + MX93_PAD_SD1_DATA6__USDHC1_DATA6 0x13fe + MX93_PAD_SD1_DATA7__USDHC1_DATA7 0x13fe + MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe >; }; pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { fsl,pins = < - MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e + MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e >; }; pinctrl_usdhc2_gpio: usdhc2gpiogrp { fsl,pins = < - MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e >; }; pinctrl_usdhc2: usdhc2grp { fsl,pins = < - MX93_PAD_SD2_CLK__USDHC2_CLK 0x17fe - MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe - MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe - MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe - MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe - MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe - MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e >; }; }; - -&wdog3 { - status = "okay"; -}; diff --git a/arch/arm/dts/imx93-pinfunc.h b/arch/arm/dts/imx93-pinfunc.h index 7f0136c70b6..4298a145f8a 100644 --- a/arch/arm/dts/imx93-pinfunc.h +++ b/arch/arm/dts/imx93-pinfunc.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ /* * Copyright 2022 NXP */ @@ -10,57 +10,57 @@ * The pin function ID is a tuple of * <mux_reg conf_reg input_reg mux_mode input_val> */ -#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01B0 0x03E0 0x0 0x0 +#define MX93_PAD_DAP_TDI__JTAG_MUX_TDI 0x0000 0x01B0 0x03D8 0x0 0x0 #define MX93_PAD_DAP_TDI__MQS2_LEFT 0x0000 0x01B0 0x0000 0x1 0x0 #define MX93_PAD_DAP_TDI__CAN2_TX 0x0000 0x01B0 0x0000 0x3 0x0 #define MX93_PAD_DAP_TDI__FLEXIO2_FLEXIO30 0x0000 0x01B0 0x0000 0x4 0x0 -#define MX93_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01B0 0x03CC 0x5 0x0 -#define MX93_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01B0 0x0438 0x6 0x0 -#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01B4 0x03E4 0x0 0x0 +#define MX93_PAD_DAP_TDI__GPIO3_IO28 0x0000 0x01B0 0x0000 0x5 0x0 +#define MX93_PAD_DAP_TDI__LPUART5_RX 0x0000 0x01B0 0x0430 0x6 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS 0x0004 0x01B4 0x03DC 0x0 0x0 #define MX93_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31 0x0004 0x01B4 0x0000 0x4 0x0 -#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01B4 0x03D0 0x5 0x0 +#define MX93_PAD_DAP_TMS_SWDIO__GPIO3_IO29 0x0004 0x01B4 0x0000 0x5 0x0 #define MX93_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B 0x0004 0x01B4 0x0000 0x6 0x0 -#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01B8 0x03DC 0x0 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK 0x0008 0x01B8 0x03D4 0x0 0x0 #define MX93_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30 0x0008 0x01B8 0x0000 0x4 0x0 #define MX93_PAD_DAP_TCLK_SWCLK__GPIO3_IO30 0x0008 0x01B8 0x0000 0x5 0x0 -#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01B8 0x0434 0x6 0x0 +#define MX93_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B 0x0008 0x01B8 0x042C 0x6 0x0 #define MX93_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO 0x000C 0x01BC 0x0000 0x0 0x0 #define MX93_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT 0x000C 0x01BC 0x0000 0x1 0x0 #define MX93_PAD_DAP_TDO_TRACESWO__CAN2_RX 0x000C 0x01BC 0x0364 0x3 0x0 #define MX93_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31 0x000C 0x01BC 0x0000 0x4 0x0 #define MX93_PAD_DAP_TDO_TRACESWO__GPIO3_IO31 0x000C 0x01BC 0x0000 0x5 0x0 -#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000C 0x01BC 0x043C 0x6 0x0 +#define MX93_PAD_DAP_TDO_TRACESWO__LPUART5_TX 0x000C 0x01BC 0x0434 0x6 0x0 #define MX93_PAD_GPIO_IO00__GPIO2_IO00 0x0010 0x01C0 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01C0 0x03EC 0x1 0x0 +#define MX93_PAD_GPIO_IO00__LPI2C3_SDA 0x0010 0x01C0 0x03E4 0x11 0x0 #define MX93_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK 0x0010 0x01C0 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK 0x0010 0x01C0 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO00__LPSPI6_PCS0 0x0010 0x01C0 0x0000 0x4 0x0 -#define MX93_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01C0 0x043C 0x5 0x1 -#define MX93_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01C0 0x03F4 0x6 0x0 +#define MX93_PAD_GPIO_IO00__LPUART5_TX 0x0010 0x01C0 0x0434 0x5 0x1 +#define MX93_PAD_GPIO_IO00__LPI2C5_SDA 0x0010 0x01C0 0x03EC 0x16 0x0 #define MX93_PAD_GPIO_IO00__FLEXIO1_FLEXIO00 0x0010 0x01C0 0x036C 0x7 0x0 #define MX93_PAD_GPIO_IO01__GPIO2_IO01 0x0014 0x01C4 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01C4 0x03E8 0x1 0x0 +#define MX93_PAD_GPIO_IO01__LPI2C3_SCL 0x0014 0x01C4 0x03E0 0x11 0x0 #define MX93_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA00 0x0014 0x01C4 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO01__MEDIAMIX_DISP_DE 0x0014 0x01C4 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO01__LPSPI6_SIN 0x0014 0x01C4 0x0000 0x4 0x0 -#define MX93_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01C4 0x0438 0x5 0x1 -#define MX93_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01C4 0x03F0 0x6 0x0 +#define MX93_PAD_GPIO_IO01__LPUART5_RX 0x0014 0x01C4 0x0430 0x5 0x1 +#define MX93_PAD_GPIO_IO01__LPI2C5_SCL 0x0014 0x01C4 0x03E8 0x16 0x0 #define MX93_PAD_GPIO_IO01__FLEXIO1_FLEXIO01 0x0014 0x01C4 0x0370 0x7 0x0 #define MX93_PAD_GPIO_IO02__GPIO2_IO02 0x0018 0x01C8 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01C8 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO02__LPI2C4_SDA 0x0018 0x01C8 0x0000 0x11 0x0 #define MX93_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC 0x0018 0x01C8 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC 0x0018 0x01C8 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO02__LPSPI6_SOUT 0x0018 0x01C8 0x0000 0x4 0x0 -#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01C8 0x0434 0x5 0x1 -#define MX93_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01C8 0x03FC 0x6 0x0 +#define MX93_PAD_GPIO_IO02__LPUART5_CTS_B 0x0018 0x01C8 0x042C 0x5 0x1 +#define MX93_PAD_GPIO_IO02__LPI2C6_SDA 0x0018 0x01C8 0x03F4 0x16 0x0 #define MX93_PAD_GPIO_IO02__FLEXIO1_FLEXIO02 0x0018 0x01C8 0x0374 0x7 0x0 #define MX93_PAD_GPIO_IO03__GPIO2_IO03 0x001C 0x01CC 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO03__LPI2C4_SCL 0x001C 0x01CC 0x0000 0x1 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C4_SCL 0x001C 0x01CC 0x0000 0x11 0x0 #define MX93_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC 0x001C 0x01CC 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC 0x001C 0x01CC 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO03__LPSPI6_SCK 0x001C 0x01CC 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO03__LPUART5_RTS_B 0x001C 0x01CC 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO03__LPI2C6_SCL 0x001C 0x01CC 0x03F8 0x6 0x0 +#define MX93_PAD_GPIO_IO03__LPI2C6_SCL 0x001C 0x01CC 0x03F0 0x16 0x0 #define MX93_PAD_GPIO_IO03__FLEXIO1_FLEXIO03 0x001C 0x01CC 0x0378 0x7 0x0 #define MX93_PAD_GPIO_IO04__GPIO2_IO04 0x0020 0x01D0 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO04__TPM3_CH0 0x0020 0x01D0 0x0000 0x1 0x0 @@ -68,23 +68,23 @@ #define MX93_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA00 0x0020 0x01D0 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO04__LPSPI7_PCS0 0x0020 0x01D0 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO04__LPUART6_TX 0x0020 0x01D0 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01D0 0x03FC 0x6 0x1 +#define MX93_PAD_GPIO_IO04__LPI2C6_SDA 0x0020 0x01D0 0x03F4 0x16 0x1 #define MX93_PAD_GPIO_IO04__FLEXIO1_FLEXIO04 0x0020 0x01D0 0x037C 0x7 0x0 #define MX93_PAD_GPIO_IO05__GPIO2_IO05 0x0024 0x01D4 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO05__TPM4_CH0 0x0024 0x01D4 0x0000 0x1 0x0 -#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00 0x0024 0x01D4 0x0440 0x2 0x0 +#define MX93_PAD_GPIO_IO05__PDM_BIT_STREAM00 0x0024 0x01D4 0x0438 0x2 0x0 #define MX93_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA01 0x0024 0x01D4 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO05__LPSPI7_SIN 0x0024 0x01D4 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO05__LPUART6_RX 0x0024 0x01D4 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01D4 0x03F8 0x6 0x1 +#define MX93_PAD_GPIO_IO05__LPI2C6_SCL 0x0024 0x01D4 0x03F0 0x16 0x1 #define MX93_PAD_GPIO_IO05__FLEXIO1_FLEXIO05 0x0024 0x01D4 0x0380 0x7 0x0 #define MX93_PAD_GPIO_IO06__GPIO2_IO06 0x0028 0x01D8 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO06__TPM5_CH0 0x0028 0x01D8 0x0000 0x1 0x0 -#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01 0x0028 0x01D8 0x0444 0x2 0x0 +#define MX93_PAD_GPIO_IO06__PDM_BIT_STREAM01 0x0028 0x01D8 0x043C 0x2 0x0 #define MX93_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA02 0x0028 0x01D8 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO06__LPSPI7_SOUT 0x0028 0x01D8 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO06__LPUART6_CTS_B 0x0028 0x01D8 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01D8 0x0404 0x6 0x0 +#define MX93_PAD_GPIO_IO06__LPI2C7_SDA 0x0028 0x01D8 0x03FC 0x16 0x0 #define MX93_PAD_GPIO_IO06__FLEXIO1_FLEXIO06 0x0028 0x01D8 0x0384 0x7 0x0 #define MX93_PAD_GPIO_IO07__GPIO2_IO07 0x002C 0x01DC 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO07__LPSPI3_PCS1 0x002C 0x01DC 0x0000 0x1 0x0 @@ -92,7 +92,7 @@ #define MX93_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA03 0x002C 0x01DC 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO07__LPSPI7_SCK 0x002C 0x01DC 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO07__LPUART6_RTS_B 0x002C 0x01DC 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x002C 0x01DC 0x0400 0x6 0x0 +#define MX93_PAD_GPIO_IO07__LPI2C7_SCL 0x002C 0x01DC 0x03F8 0x16 0x0 #define MX93_PAD_GPIO_IO07__FLEXIO1_FLEXIO07 0x002C 0x01DC 0x0388 0x7 0x0 #define MX93_PAD_GPIO_IO08__GPIO2_IO08 0x0030 0x01E0 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO08__LPSPI3_PCS0 0x0030 0x01E0 0x0000 0x1 0x0 @@ -100,7 +100,7 @@ #define MX93_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA04 0x0030 0x01E0 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO08__TPM6_CH0 0x0030 0x01E0 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO08__LPUART7_TX 0x0030 0x01E0 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01E0 0x0404 0x6 0x1 +#define MX93_PAD_GPIO_IO08__LPI2C7_SDA 0x0030 0x01E0 0x03FC 0x16 0x1 #define MX93_PAD_GPIO_IO08__FLEXIO1_FLEXIO08 0x0030 0x01E0 0x038C 0x7 0x0 #define MX93_PAD_GPIO_IO09__GPIO2_IO09 0x0034 0x01E4 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO09__LPSPI3_SIN 0x0034 0x01E4 0x0000 0x1 0x0 @@ -108,7 +108,7 @@ #define MX93_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA05 0x0034 0x01E4 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO09__TPM3_EXTCLK 0x0034 0x01E4 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO09__LPUART7_RX 0x0034 0x01E4 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01E4 0x0400 0x6 0x1 +#define MX93_PAD_GPIO_IO09__LPI2C7_SCL 0x0034 0x01E4 0x03F8 0x16 0x1 #define MX93_PAD_GPIO_IO09__FLEXIO1_FLEXIO09 0x0034 0x01E4 0x0390 0x7 0x0 #define MX93_PAD_GPIO_IO10__GPIO2_IO10 0x0038 0x01E8 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO10__LPSPI3_SOUT 0x0038 0x01E8 0x0000 0x1 0x0 @@ -116,7 +116,7 @@ #define MX93_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA06 0x0038 0x01E8 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO10__TPM4_EXTCLK 0x0038 0x01E8 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO10__LPUART7_CTS_B 0x0038 0x01E8 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01E8 0x040C 0x6 0x0 +#define MX93_PAD_GPIO_IO10__LPI2C8_SDA 0x0038 0x01E8 0x0404 0x16 0x0 #define MX93_PAD_GPIO_IO10__FLEXIO1_FLEXIO10 0x0038 0x01E8 0x0394 0x7 0x0 #define MX93_PAD_GPIO_IO11__GPIO2_IO11 0x003C 0x01EC 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO11__LPSPI3_SCK 0x003C 0x01EC 0x0000 0x1 0x0 @@ -124,47 +124,47 @@ #define MX93_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA07 0x003C 0x01EC 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO11__TPM5_EXTCLK 0x003C 0x01EC 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO11__LPUART7_RTS_B 0x003C 0x01EC 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO11__LPI2C8_SCL 0x003C 0x01EC 0x0408 0x6 0x0 +#define MX93_PAD_GPIO_IO11__LPI2C8_SCL 0x003C 0x01EC 0x0400 0x16 0x0 #define MX93_PAD_GPIO_IO11__FLEXIO1_FLEXIO11 0x003C 0x01EC 0x0398 0x7 0x0 #define MX93_PAD_GPIO_IO12__GPIO2_IO12 0x0040 0x01F0 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO12__TPM3_CH2 0x0040 0x01F0 0x0000 0x1 0x0 -#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02 0x0040 0x01F0 0x0448 0x2 0x0 +#define MX93_PAD_GPIO_IO12__PDM_BIT_STREAM02 0x0040 0x01F0 0x0440 0x2 0x0 #define MX93_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA08 0x0040 0x01F0 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO12__LPSPI8_PCS0 0x0040 0x01F0 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO12__LPUART8_TX 0x0040 0x01F0 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01F0 0x040C 0x6 0x1 -#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01F0 0x0458 0x7 0x0 +#define MX93_PAD_GPIO_IO12__LPI2C8_SDA 0x0040 0x01F0 0x0404 0x16 0x1 +#define MX93_PAD_GPIO_IO12__SAI3_RX_SYNC 0x0040 0x01F0 0x0450 0x7 0x0 #define MX93_PAD_GPIO_IO13__GPIO2_IO13 0x0044 0x01F4 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO13__TPM4_CH2 0x0044 0x01F4 0x0000 0x1 0x0 -#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03 0x0044 0x01F4 0x044C 0x2 0x0 +#define MX93_PAD_GPIO_IO13__PDM_BIT_STREAM03 0x0044 0x01F4 0x0444 0x2 0x0 #define MX93_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA09 0x0044 0x01F4 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO13__LPSPI8_SIN 0x0044 0x01F4 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO13__LPUART8_RX 0x0044 0x01F4 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01F4 0x0408 0x6 0x1 +#define MX93_PAD_GPIO_IO13__LPI2C8_SCL 0x0044 0x01F4 0x0400 0x16 0x1 #define MX93_PAD_GPIO_IO13__FLEXIO1_FLEXIO13 0x0044 0x01F4 0x039C 0x7 0x0 #define MX93_PAD_GPIO_IO14__GPIO2_IO14 0x0048 0x01F8 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01F8 0x0424 0x1 0x0 +#define MX93_PAD_GPIO_IO14__LPUART3_TX 0x0048 0x01F8 0x041C 0x1 0x0 #define MX93_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA06 0x0048 0x01F8 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10 0x0048 0x01F8 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO14__LPSPI8_SOUT 0x0048 0x01F8 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO14__LPUART8_CTS_B 0x0048 0x01F8 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01F8 0x0430 0x6 0x0 +#define MX93_PAD_GPIO_IO14__LPUART4_TX 0x0048 0x01F8 0x0428 0x6 0x0 #define MX93_PAD_GPIO_IO14__FLEXIO1_FLEXIO14 0x0048 0x01F8 0x03A0 0x7 0x0 #define MX93_PAD_GPIO_IO15__GPIO2_IO15 0x004C 0x01FC 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO15__LPUART3_RX 0x004C 0x01FC 0x0420 0x1 0x0 +#define MX93_PAD_GPIO_IO15__LPUART3_RX 0x004C 0x01FC 0x0418 0x1 0x0 #define MX93_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA07 0x004C 0x01FC 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11 0x004C 0x01FC 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO15__LPSPI8_SCK 0x004C 0x01FC 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO15__LPUART8_RTS_B 0x004C 0x01FC 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO15__LPUART4_RX 0x004C 0x01FC 0x042C 0x6 0x0 +#define MX93_PAD_GPIO_IO15__LPUART4_RX 0x004C 0x01FC 0x0424 0x6 0x0 #define MX93_PAD_GPIO_IO15__FLEXIO1_FLEXIO15 0x004C 0x01FC 0x03A4 0x7 0x0 #define MX93_PAD_GPIO_IO16__GPIO2_IO16 0x0050 0x0200 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO16__SAI3_TX_BCLK 0x0050 0x0200 0x0000 0x1 0x0 -#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02 0x0050 0x0200 0x0448 0x2 0x1 +#define MX93_PAD_GPIO_IO16__PDM_BIT_STREAM02 0x0050 0x0200 0x0440 0x2 0x1 #define MX93_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12 0x0050 0x0200 0x0000 0x3 0x0 -#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x041C 0x4 0x0 +#define MX93_PAD_GPIO_IO16__LPUART3_CTS_B 0x0050 0x0200 0x0414 0x4 0x0 #define MX93_PAD_GPIO_IO16__LPSPI4_PCS2 0x0050 0x0200 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0428 0x6 0x0 +#define MX93_PAD_GPIO_IO16__LPUART4_CTS_B 0x0050 0x0200 0x0420 0x6 0x0 #define MX93_PAD_GPIO_IO16__FLEXIO1_FLEXIO16 0x0050 0x0200 0x03A8 0x7 0x0 #define MX93_PAD_GPIO_IO17__GPIO2_IO17 0x0054 0x0204 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO17__SAI3_MCLK 0x0054 0x0204 0x0000 0x1 0x0 @@ -175,7 +175,7 @@ #define MX93_PAD_GPIO_IO17__LPUART4_RTS_B 0x0054 0x0204 0x0000 0x6 0x0 #define MX93_PAD_GPIO_IO17__FLEXIO1_FLEXIO17 0x0054 0x0204 0x03AC 0x7 0x0 #define MX93_PAD_GPIO_IO18__GPIO2_IO18 0x0058 0x0208 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x0454 0x1 0x0 +#define MX93_PAD_GPIO_IO18__SAI3_RX_BCLK 0x0058 0x0208 0x044C 0x1 0x0 #define MX93_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA09 0x0058 0x0208 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14 0x0058 0x0208 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO18__LPSPI5_PCS0 0x0058 0x0208 0x0000 0x4 0x0 @@ -183,8 +183,8 @@ #define MX93_PAD_GPIO_IO18__TPM5_CH2 0x0058 0x0208 0x0000 0x6 0x0 #define MX93_PAD_GPIO_IO18__FLEXIO1_FLEXIO18 0x0058 0x0208 0x03B0 0x7 0x0 #define MX93_PAD_GPIO_IO19__GPIO2_IO19 0x005C 0x020C 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005C 0x020C 0x0458 0x1 0x1 -#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03 0x005C 0x020C 0x044C 0x2 0x1 +#define MX93_PAD_GPIO_IO19__SAI3_RX_SYNC 0x005C 0x020C 0x0450 0x1 0x1 +#define MX93_PAD_GPIO_IO19__PDM_BIT_STREAM03 0x005C 0x020C 0x0444 0x2 0x1 #define MX93_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15 0x005C 0x020C 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO19__LPSPI5_SIN 0x005C 0x020C 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO19__LPSPI4_SIN 0x005C 0x020C 0x0000 0x5 0x0 @@ -192,7 +192,7 @@ #define MX93_PAD_GPIO_IO19__SAI3_TX_DATA00 0x005C 0x020C 0x0000 0x7 0x0 #define MX93_PAD_GPIO_IO20__GPIO2_IO20 0x0060 0x0210 0x0000 0x0 0x0 #define MX93_PAD_GPIO_IO20__SAI3_RX_DATA00 0x0060 0x0210 0x0000 0x1 0x0 -#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00 0x0060 0x0210 0x0440 0x2 0x1 +#define MX93_PAD_GPIO_IO20__PDM_BIT_STREAM00 0x0060 0x0210 0x0438 0x2 0x1 #define MX93_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16 0x0060 0x0210 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO20__LPSPI5_SOUT 0x0060 0x0210 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO20__LPSPI4_SOUT 0x0060 0x0210 0x0000 0x5 0x0 @@ -205,58 +205,58 @@ #define MX93_PAD_GPIO_IO21__LPSPI5_SCK 0x0064 0x0214 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO21__LPSPI4_SCK 0x0064 0x0214 0x0000 0x5 0x0 #define MX93_PAD_GPIO_IO21__TPM4_CH1 0x0064 0x0214 0x0000 0x6 0x0 -#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x0454 0x7 0x1 +#define MX93_PAD_GPIO_IO21__SAI3_RX_BCLK 0x0064 0x0214 0x044C 0x7 0x1 #define MX93_PAD_GPIO_IO22__GPIO2_IO22 0x0068 0x0218 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x0460 0x1 0x0 -#define MX93_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x045C 0x2 0x0 +#define MX93_PAD_GPIO_IO22__USDHC3_CLK 0x0068 0x0218 0x0458 0x1 0x0 +#define MX93_PAD_GPIO_IO22__SPDIF_IN 0x0068 0x0218 0x0454 0x2 0x0 #define MX93_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18 0x0068 0x0218 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO22__TPM5_CH1 0x0068 0x0218 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO22__TPM6_EXTCLK 0x0068 0x0218 0x0000 0x5 0x0 -#define MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x03F4 0x6 0x1 +#define MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x0068 0x0218 0x03EC 0x16 0x1 #define MX93_PAD_GPIO_IO22__FLEXIO1_FLEXIO22 0x0068 0x0218 0x03B8 0x7 0x0 #define MX93_PAD_GPIO_IO23__GPIO2_IO23 0x006C 0x021C 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO23__USDHC3_CMD 0x006C 0x021C 0x0464 0x1 0x0 +#define MX93_PAD_GPIO_IO23__USDHC3_CMD 0x006C 0x021C 0x045C 0x1 0x0 #define MX93_PAD_GPIO_IO23__SPDIF_OUT 0x006C 0x021C 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19 0x006C 0x021C 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO23__TPM6_CH1 0x006C 0x021C 0x0000 0x4 0x0 -#define MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x006C 0x021C 0x03F0 0x6 0x1 +#define MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x006C 0x021C 0x03E8 0x16 0x1 #define MX93_PAD_GPIO_IO23__FLEXIO1_FLEXIO23 0x006C 0x021C 0x03BC 0x7 0x0 #define MX93_PAD_GPIO_IO24__GPIO2_IO24 0x0070 0x0220 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x0468 0x1 0x0 +#define MX93_PAD_GPIO_IO24__USDHC3_DATA0 0x0070 0x0220 0x0460 0x1 0x0 #define MX93_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20 0x0070 0x0220 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO24__TPM3_CH3 0x0070 0x0220 0x0000 0x4 0x0 #define MX93_PAD_GPIO_IO24__JTAG_MUX_TDO 0x0070 0x0220 0x0000 0x5 0x0 #define MX93_PAD_GPIO_IO24__LPSPI6_PCS1 0x0070 0x0220 0x0000 0x6 0x0 #define MX93_PAD_GPIO_IO24__FLEXIO1_FLEXIO24 0x0070 0x0220 0x03C0 0x7 0x0 #define MX93_PAD_GPIO_IO25__GPIO2_IO25 0x0074 0x0224 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x046C 0x1 0x0 +#define MX93_PAD_GPIO_IO25__USDHC3_DATA1 0x0074 0x0224 0x0464 0x1 0x0 #define MX93_PAD_GPIO_IO25__CAN2_TX 0x0074 0x0224 0x0000 0x2 0x0 #define MX93_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21 0x0074 0x0224 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO25__TPM4_CH3 0x0074 0x0224 0x0000 0x4 0x0 -#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03DC 0x5 0x1 +#define MX93_PAD_GPIO_IO25__JTAG_MUX_TCK 0x0074 0x0224 0x03D4 0x5 0x1 #define MX93_PAD_GPIO_IO25__LPSPI7_PCS1 0x0074 0x0224 0x0000 0x6 0x0 #define MX93_PAD_GPIO_IO25__FLEXIO1_FLEXIO25 0x0074 0x0224 0x03C4 0x7 0x0 #define MX93_PAD_GPIO_IO26__GPIO2_IO26 0x0078 0x0228 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x0470 0x1 0x0 -#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01 0x0078 0x0228 0x0444 0x2 0x1 +#define MX93_PAD_GPIO_IO26__USDHC3_DATA2 0x0078 0x0228 0x0468 0x1 0x0 +#define MX93_PAD_GPIO_IO26__PDM_BIT_STREAM01 0x0078 0x0228 0x043C 0x2 0x1 #define MX93_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22 0x0078 0x0228 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO26__TPM5_CH3 0x0078 0x0228 0x0000 0x4 0x0 -#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03E0 0x5 0x1 +#define MX93_PAD_GPIO_IO26__JTAG_MUX_TDI 0x0078 0x0228 0x03D8 0x5 0x1 #define MX93_PAD_GPIO_IO26__LPSPI8_PCS1 0x0078 0x0228 0x0000 0x6 0x0 #define MX93_PAD_GPIO_IO26__SAI3_TX_SYNC 0x0078 0x0228 0x0000 0x7 0x0 #define MX93_PAD_GPIO_IO27__GPIO2_IO27 0x007C 0x022C 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x007C 0x022C 0x0474 0x1 0x0 +#define MX93_PAD_GPIO_IO27__USDHC3_DATA3 0x007C 0x022C 0x046C 0x1 0x0 #define MX93_PAD_GPIO_IO27__CAN2_RX 0x007C 0x022C 0x0364 0x2 0x1 #define MX93_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23 0x007C 0x022C 0x0000 0x3 0x0 #define MX93_PAD_GPIO_IO27__TPM6_CH3 0x007C 0x022C 0x0000 0x4 0x0 -#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007C 0x022C 0x03E4 0x5 0x1 +#define MX93_PAD_GPIO_IO27__JTAG_MUX_TMS 0x007C 0x022C 0x03DC 0x5 0x1 #define MX93_PAD_GPIO_IO27__LPSPI5_PCS1 0x007C 0x022C 0x0000 0x6 0x0 #define MX93_PAD_GPIO_IO27__FLEXIO1_FLEXIO27 0x007C 0x022C 0x03C8 0x7 0x0 #define MX93_PAD_GPIO_IO28__GPIO2_IO28 0x0080 0x0230 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03EC 0x1 0x1 +#define MX93_PAD_GPIO_IO28__LPI2C3_SDA 0x0080 0x0230 0x03E4 0x11 0x1 #define MX93_PAD_GPIO_IO28__FLEXIO1_FLEXIO28 0x0080 0x0230 0x0000 0x7 0x0 #define MX93_PAD_GPIO_IO29__GPIO2_IO29 0x0084 0x0234 0x0000 0x0 0x0 -#define MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03E8 0x1 0x1 +#define MX93_PAD_GPIO_IO29__LPI2C3_SCL 0x0084 0x0234 0x03E0 0x11 0x1 #define MX93_PAD_GPIO_IO29__FLEXIO1_FLEXIO29 0x0084 0x0234 0x0000 0x7 0x0 #define MX93_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1 0x0088 0x0238 0x0000 0x0 0x0 #define MX93_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26 0x0088 0x0238 0x0000 0x4 0x0 @@ -266,20 +266,19 @@ #define MX93_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27 0x008C 0x023C 0x03C8 0x4 0x1 #define MX93_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3 0x0090 0x0240 0x0000 0x0 0x0 #define MX93_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28 0x0090 0x0240 0x0000 0x4 0x0 -#define MX93_PAD_CCM_CLKO3__GPIO3_IO28 0x0090 0x0240 0x03CC 0x5 0x1 +#define MX93_PAD_CCM_CLKO3__GPIO4_IO28 0x0090 0x0240 0x0000 0x5 0x0 #define MX93_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4 0x0094 0x0244 0x0000 0x0 0x0 #define MX93_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29 0x0094 0x0244 0x0000 0x4 0x0 -#define MX93_PAD_CCM_CLKO4__GPIO3_IO29 0x0094 0x0244 0x03D0 0x5 0x1 +#define MX93_PAD_CCM_CLKO4__GPIO4_IO29 0x0094 0x0244 0x0000 0x5 0x0 #define MX93_PAD_ENET1_MDC__ENET_QOS_MDC 0x0098 0x0248 0x0000 0x0 0x0 #define MX93_PAD_ENET1_MDC__LPUART3_DCB_B 0x0098 0x0248 0x0000 0x1 0x0 -#define MX93_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03D4 0x2 0x0 +#define MX93_PAD_ENET1_MDC__I3C2_SCL 0x0098 0x0248 0x03CC 0x2 0x0 #define MX93_PAD_ENET1_MDC__HSIOMIX_OTG_ID1 0x0098 0x0248 0x0000 0x3 0x0 #define MX93_PAD_ENET1_MDC__FLEXIO2_FLEXIO00 0x0098 0x0248 0x0000 0x4 0x0 #define MX93_PAD_ENET1_MDC__GPIO4_IO00 0x0098 0x0248 0x0000 0x5 0x0 -#define MX93_PAD_ENET1_MDC__LPUART5_RTS_B 0x0098 0x0248 0x0000 0x6 0x0 #define MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO 0x009C 0x024C 0x0000 0x0 0x0 #define MX93_PAD_ENET1_MDIO__LPUART3_RIN_B 0x009C 0x024C 0x0000 0x1 0x0 -#define MX93_PAD_ENET1_MDIO__I3C2_SDA 0x009C 0x024C 0x03D8 0x2 0x0 +#define MX93_PAD_ENET1_MDIO__I3C2_SDA 0x009C 0x024C 0x03D0 0x2 0x0 #define MX93_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1 0x009C 0x024C 0x0000 0x3 0x0 #define MX93_PAD_ENET1_MDIO__FLEXIO2_FLEXIO01 0x009C 0x024C 0x0000 0x4 0x0 #define MX93_PAD_ENET1_MDIO__GPIO4_IO01 0x009C 0x024C 0x0000 0x5 0x0 @@ -302,7 +301,7 @@ #define MX93_PAD_ENET1_TD1__GPIO4_IO04 0x00A8 0x0258 0x0000 0x5 0x0 #define MX93_PAD_ENET1_TD1__I3C2_PUR_B 0x00A8 0x0258 0x0000 0x6 0x0 #define MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0 0x00AC 0x025C 0x0000 0x0 0x0 -#define MX93_PAD_ENET1_TD0__LPUART3_TX 0x00AC 0x025C 0x0424 0x1 0x1 +#define MX93_PAD_ENET1_TD0__LPUART3_TX 0x00AC 0x025C 0x041C 0x1 0x1 #define MX93_PAD_ENET1_TD0__FLEXIO2_FLEXIO05 0x00AC 0x025C 0x0000 0x4 0x0 #define MX93_PAD_ENET1_TD0__GPIO4_IO05 0x00AC 0x025C 0x0000 0x5 0x0 #define MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x00B0 0x0260 0x0000 0x0 0x0 @@ -323,21 +322,21 @@ #define MX93_PAD_ENET1_RXC__FLEXIO2_FLEXIO09 0x00BC 0x026C 0x0000 0x4 0x0 #define MX93_PAD_ENET1_RXC__GPIO4_IO09 0x00BC 0x026C 0x0000 0x5 0x0 #define MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0 0x00C0 0x0270 0x0000 0x0 0x0 -#define MX93_PAD_ENET1_RD0__LPUART3_RX 0x00C0 0x0270 0x0420 0x1 0x1 +#define MX93_PAD_ENET1_RD0__LPUART3_RX 0x00C0 0x0270 0x0418 0x1 0x1 #define MX93_PAD_ENET1_RD0__FLEXIO2_FLEXIO10 0x00C0 0x0270 0x0000 0x4 0x0 #define MX93_PAD_ENET1_RD0__GPIO4_IO10 0x00C0 0x0270 0x0000 0x5 0x0 #define MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1 0x00C4 0x0274 0x0000 0x0 0x0 -#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B 0x00C4 0x0274 0x041C 0x1 0x1 -#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1 0x00C4 0x0274 0x0410 0x3 0x0 +#define MX93_PAD_ENET1_RD1__LPUART3_CTS_B 0x00C4 0x0274 0x0414 0x1 0x1 +#define MX93_PAD_ENET1_RD1__LPTMR2_ALT1 0x00C4 0x0274 0x0408 0x3 0x0 #define MX93_PAD_ENET1_RD1__FLEXIO2_FLEXIO11 0x00C4 0x0274 0x0000 0x4 0x0 #define MX93_PAD_ENET1_RD1__GPIO4_IO11 0x00C4 0x0274 0x0000 0x5 0x0 #define MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2 0x00C8 0x0278 0x0000 0x0 0x0 -#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2 0x00C8 0x0278 0x0414 0x3 0x0 +#define MX93_PAD_ENET1_RD2__LPTMR2_ALT2 0x00C8 0x0278 0x040C 0x3 0x0 #define MX93_PAD_ENET1_RD2__FLEXIO2_FLEXIO12 0x00C8 0x0278 0x0000 0x4 0x0 #define MX93_PAD_ENET1_RD2__GPIO4_IO12 0x00C8 0x0278 0x0000 0x5 0x0 #define MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3 0x00CC 0x027C 0x0000 0x0 0x0 #define MX93_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER 0x00CC 0x027C 0x0000 0x2 0x0 -#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3 0x00CC 0x027C 0x0418 0x3 0x0 +#define MX93_PAD_ENET1_RD3__LPTMR2_ALT3 0x00CC 0x027C 0x0410 0x3 0x0 #define MX93_PAD_ENET1_RD3__FLEXIO2_FLEXIO13 0x00CC 0x027C 0x0000 0x4 0x0 #define MX93_PAD_ENET1_RD3__GPIO4_IO13 0x00CC 0x027C 0x0000 0x5 0x0 #define MX93_PAD_ENET2_MDC__ENET1_MDC 0x00D0 0x0280 0x0000 0x0 0x0 @@ -365,7 +364,7 @@ #define MX93_PAD_ENET2_TD1__FLEXIO2_FLEXIO18 0x00E0 0x0290 0x0000 0x4 0x0 #define MX93_PAD_ENET2_TD1__GPIO4_IO18 0x00E0 0x0290 0x0000 0x5 0x0 #define MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x00E4 0x0294 0x0000 0x0 0x0 -#define MX93_PAD_ENET2_TD0__LPUART4_TX 0x00E4 0x0294 0x0430 0x1 0x1 +#define MX93_PAD_ENET2_TD0__LPUART4_TX 0x00E4 0x0294 0x0428 0x1 0x1 #define MX93_PAD_ENET2_TD0__SAI2_RX_DATA03 0x00E4 0x0294 0x0000 0x2 0x0 #define MX93_PAD_ENET2_TD0__FLEXIO2_FLEXIO19 0x00E4 0x0294 0x0000 0x4 0x0 #define MX93_PAD_ENET2_TD0__GPIO4_IO19 0x00E4 0x0294 0x0000 0x5 0x0 @@ -390,24 +389,24 @@ #define MX93_PAD_ENET2_RXC__FLEXIO2_FLEXIO23 0x00F4 0x02A4 0x0000 0x4 0x0 #define MX93_PAD_ENET2_RXC__GPIO4_IO23 0x00F4 0x02A4 0x0000 0x5 0x0 #define MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x00F8 0x02A8 0x0000 0x0 0x0 -#define MX93_PAD_ENET2_RD0__LPUART4_RX 0x00F8 0x02A8 0x042C 0x1 0x1 +#define MX93_PAD_ENET2_RD0__LPUART4_RX 0x00F8 0x02A8 0x0424 0x1 0x1 #define MX93_PAD_ENET2_RD0__SAI2_TX_DATA02 0x00F8 0x02A8 0x0000 0x2 0x0 #define MX93_PAD_ENET2_RD0__FLEXIO2_FLEXIO24 0x00F8 0x02A8 0x0000 0x4 0x0 #define MX93_PAD_ENET2_RD0__GPIO4_IO24 0x00F8 0x02A8 0x0000 0x5 0x0 #define MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x00FC 0x02AC 0x0000 0x0 0x0 -#define MX93_PAD_ENET2_RD1__SPDIF_IN 0x00FC 0x02AC 0x045C 0x1 0x1 +#define MX93_PAD_ENET2_RD1__SPDIF_IN 0x00FC 0x02AC 0x0454 0x1 0x1 #define MX93_PAD_ENET2_RD1__SAI2_TX_DATA03 0x00FC 0x02AC 0x0000 0x2 0x0 #define MX93_PAD_ENET2_RD1__FLEXIO2_FLEXIO25 0x00FC 0x02AC 0x0000 0x4 0x0 #define MX93_PAD_ENET2_RD1__GPIO4_IO25 0x00FC 0x02AC 0x0000 0x5 0x0 #define MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x0100 0x02B0 0x0000 0x0 0x0 -#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02B0 0x0428 0x1 0x1 +#define MX93_PAD_ENET2_RD2__LPUART4_CTS_B 0x0100 0x02B0 0x0420 0x1 0x1 #define MX93_PAD_ENET2_RD2__SAI2_MCLK 0x0100 0x02B0 0x0000 0x2 0x0 #define MX93_PAD_ENET2_RD2__MQS2_RIGHT 0x0100 0x02B0 0x0000 0x3 0x0 #define MX93_PAD_ENET2_RD2__FLEXIO2_FLEXIO26 0x0100 0x02B0 0x0000 0x4 0x0 #define MX93_PAD_ENET2_RD2__GPIO4_IO26 0x0100 0x02B0 0x0000 0x5 0x0 #define MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x0104 0x02B4 0x0000 0x0 0x0 #define MX93_PAD_ENET2_RD3__SPDIF_OUT 0x0104 0x02B4 0x0000 0x1 0x0 -#define MX93_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02B4 0x045C 0x2 0x2 +#define MX93_PAD_ENET2_RD3__SPDIF_IN 0x0104 0x02B4 0x0454 0x2 0x2 #define MX93_PAD_ENET2_RD3__MQS2_LEFT 0x0104 0x02B4 0x0000 0x3 0x0 #define MX93_PAD_ENET2_RD3__FLEXIO2_FLEXIO27 0x0104 0x02B4 0x0000 0x4 0x0 #define MX93_PAD_ENET2_RD3__GPIO4_IO27 0x0104 0x02B4 0x0000 0x5 0x0 @@ -457,43 +456,42 @@ #define MX93_PAD_SD1_STROBE__GPIO3_IO18 0x0130 0x02E0 0x0000 0x5 0x0 #define MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x0134 0x02E4 0x0000 0x0 0x0 #define MX93_PAD_SD2_VSELECT__USDHC2_WP 0x0134 0x02E4 0x0000 0x1 0x0 -#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02E4 0x0418 0x2 0x1 +#define MX93_PAD_SD2_VSELECT__LPTMR2_ALT3 0x0134 0x02E4 0x0410 0x2 0x1 #define MX93_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19 0x0134 0x02E4 0x0000 0x4 0x0 #define MX93_PAD_SD2_VSELECT__GPIO3_IO19 0x0134 0x02E4 0x0000 0x5 0x0 #define MX93_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1 0x0134 0x02E4 0x0368 0x6 0x0 -#define MX93_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02E8 0x0460 0x0 0x1 +#define MX93_PAD_SD3_CLK__USDHC3_CLK 0x0138 0x02E8 0x0458 0x0 0x1 #define MX93_PAD_SD3_CLK__FLEXSPI1_A_SCLK 0x0138 0x02E8 0x0000 0x1 0x0 #define MX93_PAD_SD3_CLK__FLEXIO1_FLEXIO20 0x0138 0x02E8 0x03B4 0x4 0x1 #define MX93_PAD_SD3_CLK__GPIO3_IO20 0x0138 0x02E8 0x0000 0x5 0x0 -#define MX93_PAD_SD3_CMD__USDHC3_CMD 0x013C 0x02EC 0x0464 0x0 0x1 +#define MX93_PAD_SD3_CMD__USDHC3_CMD 0x013C 0x02EC 0x045C 0x0 0x1 #define MX93_PAD_SD3_CMD__FLEXSPI1_A_SS0_B 0x013C 0x02EC 0x0000 0x1 0x0 #define MX93_PAD_SD3_CMD__FLEXIO1_FLEXIO21 0x013C 0x02EC 0x0000 0x4 0x0 #define MX93_PAD_SD3_CMD__GPIO3_IO21 0x013C 0x02EC 0x0000 0x5 0x0 -#define MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02F0 0x0468 0x0 0x1 +#define MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x0140 0x02F0 0x0460 0x0 0x1 #define MX93_PAD_SD3_DATA0__FLEXSPI1_A_DATA00 0x0140 0x02F0 0x0000 0x1 0x0 #define MX93_PAD_SD3_DATA0__FLEXIO1_FLEXIO22 0x0140 0x02F0 0x03B8 0x4 0x1 #define MX93_PAD_SD3_DATA0__GPIO3_IO22 0x0140 0x02F0 0x0000 0x5 0x0 -#define MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02F4 0x046C 0x0 0x1 +#define MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x0144 0x02F4 0x0464 0x0 0x1 #define MX93_PAD_SD3_DATA1__FLEXSPI1_A_DATA01 0x0144 0x02F4 0x0000 0x1 0x0 #define MX93_PAD_SD3_DATA1__FLEXIO1_FLEXIO23 0x0144 0x02F4 0x03BC 0x4 0x1 #define MX93_PAD_SD3_DATA1__GPIO3_IO23 0x0144 0x02F4 0x0000 0x5 0x0 -#define MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02F8 0x0470 0x0 0x1 +#define MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x0148 0x02F8 0x0468 0x0 0x1 #define MX93_PAD_SD3_DATA2__FLEXSPI1_A_DATA02 0x0148 0x02F8 0x0000 0x1 0x0 #define MX93_PAD_SD3_DATA2__FLEXIO1_FLEXIO24 0x0148 0x02F8 0x03C0 0x4 0x1 #define MX93_PAD_SD3_DATA2__GPIO3_IO24 0x0148 0x02F8 0x0000 0x5 0x0 -#define MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x014C 0x02FC 0x0474 0x0 0x1 +#define MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x014C 0x02FC 0x046C 0x0 0x1 #define MX93_PAD_SD3_DATA3__FLEXSPI1_A_DATA03 0x014C 0x02FC 0x0000 0x1 0x0 #define MX93_PAD_SD3_DATA3__FLEXIO1_FLEXIO25 0x014C 0x02FC 0x03C4 0x4 0x1 #define MX93_PAD_SD3_DATA3__GPIO3_IO25 0x014C 0x02FC 0x0000 0x5 0x0 #define MX93_PAD_SD2_CD_B__USDHC2_CD_B 0x0150 0x0300 0x0000 0x0 0x0 #define MX93_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN 0x0150 0x0300 0x0000 0x1 0x0 -#define MX93_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03D4 0x2 0x1 +#define MX93_PAD_SD2_CD_B__I3C2_SCL 0x0150 0x0300 0x03CC 0x2 0x1 #define MX93_PAD_SD2_CD_B__FLEXIO1_FLEXIO00 0x0150 0x0300 0x036C 0x4 0x1 #define MX93_PAD_SD2_CD_B__GPIO3_IO00 0x0150 0x0300 0x0000 0x5 0x0 -#define MX93_PAD_SD2_CD_B__CCMSRCGPCMIX_TESTER_ACK 0x0150 0x0300 0x0000 0x6 0x0 #define MX93_PAD_SD2_CLK__USDHC2_CLK 0x0154 0x0304 0x0000 0x0 0x0 #define MX93_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT 0x0154 0x0304 0x0000 0x1 0x0 -#define MX93_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03D8 0x2 0x1 +#define MX93_PAD_SD2_CLK__I3C2_SDA 0x0154 0x0304 0x03D0 0x2 0x1 #define MX93_PAD_SD2_CLK__FLEXIO1_FLEXIO01 0x0154 0x0304 0x0370 0x4 0x1 #define MX93_PAD_SD2_CLK__GPIO3_IO01 0x0154 0x0304 0x0000 0x5 0x0 #define MX93_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0 0x0154 0x0304 0x0000 0x6 0x0 @@ -523,34 +521,34 @@ #define MX93_PAD_SD2_DATA2__GPIO3_IO05 0x0164 0x0314 0x0000 0x5 0x0 #define MX93_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP 0x0164 0x0314 0x0000 0x6 0x0 #define MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x0168 0x0318 0x0000 0x0 0x0 -#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0410 0x1 0x1 +#define MX93_PAD_SD2_DATA3__LPTMR2_ALT1 0x0168 0x0318 0x0408 0x1 0x1 #define MX93_PAD_SD2_DATA3__MQS2_LEFT 0x0168 0x0318 0x0000 0x2 0x0 #define MX93_PAD_SD2_DATA3__FLEXIO1_FLEXIO06 0x0168 0x0318 0x0384 0x4 0x1 #define MX93_PAD_SD2_DATA3__GPIO3_IO06 0x0168 0x0318 0x0000 0x5 0x0 #define MX93_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET 0x0168 0x0318 0x0000 0x6 0x0 #define MX93_PAD_SD2_RESET_B__USDHC2_RESET_B 0x016C 0x031C 0x0000 0x0 0x0 -#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016C 0x031C 0x0414 0x1 0x1 +#define MX93_PAD_SD2_RESET_B__LPTMR2_ALT2 0x016C 0x031C 0x040C 0x1 0x1 #define MX93_PAD_SD2_RESET_B__FLEXIO1_FLEXIO07 0x016C 0x031C 0x0388 0x4 0x1 #define MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x016C 0x031C 0x0000 0x5 0x0 #define MX93_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET 0x016C 0x031C 0x0000 0x6 0x0 -#define MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x0000 0x0 0x0 +#define MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x0170 0x0320 0x0000 0x10 0x0 #define MX93_PAD_I2C1_SCL__I3C1_SCL 0x0170 0x0320 0x0000 0x1 0x0 #define MX93_PAD_I2C1_SCL__LPUART1_DCB_B 0x0170 0x0320 0x0000 0x2 0x0 #define MX93_PAD_I2C1_SCL__TPM2_CH0 0x0170 0x0320 0x0000 0x3 0x0 #define MX93_PAD_I2C1_SCL__GPIO1_IO00 0x0170 0x0320 0x0000 0x5 0x0 -#define MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x0000 0x0 0x0 +#define MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x0174 0x0324 0x0000 0x10 0x0 #define MX93_PAD_I2C1_SDA__I3C1_SDA 0x0174 0x0324 0x0000 0x1 0x0 #define MX93_PAD_I2C1_SDA__LPUART1_RIN_B 0x0174 0x0324 0x0000 0x2 0x0 #define MX93_PAD_I2C1_SDA__TPM2_CH1 0x0174 0x0324 0x0000 0x3 0x0 #define MX93_PAD_I2C1_SDA__GPIO1_IO01 0x0174 0x0324 0x0000 0x5 0x0 -#define MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x0000 0x0 0x0 +#define MX93_PAD_I2C2_SCL__LPI2C2_SCL 0x0178 0x0328 0x0000 0x10 0x0 #define MX93_PAD_I2C2_SCL__I3C1_PUR 0x0178 0x0328 0x0000 0x1 0x0 #define MX93_PAD_I2C2_SCL__LPUART2_DCB_B 0x0178 0x0328 0x0000 0x2 0x0 #define MX93_PAD_I2C2_SCL__TPM2_CH2 0x0178 0x0328 0x0000 0x3 0x0 #define MX93_PAD_I2C2_SCL__SAI1_RX_SYNC 0x0178 0x0328 0x0000 0x4 0x0 #define MX93_PAD_I2C2_SCL__GPIO1_IO02 0x0178 0x0328 0x0000 0x5 0x0 #define MX93_PAD_I2C2_SCL__I3C1_PUR_B 0x0178 0x0328 0x0000 0x6 0x0 -#define MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x017C 0x032C 0x0000 0x0 0x0 +#define MX93_PAD_I2C2_SDA__LPI2C2_SDA 0x017C 0x032C 0x0000 0x10 0x0 #define MX93_PAD_I2C2_SDA__LPUART2_RIN_B 0x017C 0x032C 0x0000 0x2 0x0 #define MX93_PAD_I2C2_SDA__TPM2_CH3 0x017C 0x032C 0x0000 0x3 0x0 #define MX93_PAD_I2C2_SDA__SAI1_RX_BCLK 0x017C 0x032C 0x0000 0x4 0x0 @@ -569,7 +567,7 @@ #define MX93_PAD_UART2_RXD__LPUART1_CTS_B 0x0188 0x0338 0x0000 0x1 0x0 #define MX93_PAD_UART2_RXD__LPSPI2_SOUT 0x0188 0x0338 0x0000 0x2 0x0 #define MX93_PAD_UART2_RXD__TPM1_CH2 0x0188 0x0338 0x0000 0x3 0x0 -#define MX93_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x0450 0x4 0x0 +#define MX93_PAD_UART2_RXD__SAI1_MCLK 0x0188 0x0338 0x0448 0x4 0x0 #define MX93_PAD_UART2_RXD__GPIO1_IO06 0x0188 0x0338 0x0000 0x5 0x0 #define MX93_PAD_UART2_TXD__LPUART2_TX 0x018C 0x033C 0x0000 0x0 0x0 #define MX93_PAD_UART2_TXD__LPUART1_RTS_B 0x018C 0x033C 0x0000 0x1 0x0 @@ -581,14 +579,14 @@ #define MX93_PAD_PDM_CLK__LPTMR1_ALT1 0x0190 0x0340 0x0000 0x4 0x0 #define MX93_PAD_PDM_CLK__GPIO1_IO08 0x0190 0x0340 0x0000 0x5 0x0 #define MX93_PAD_PDM_CLK__CAN1_TX 0x0190 0x0340 0x0000 0x6 0x0 -#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x0194 0x0344 0x0440 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x0194 0x0344 0x0438 0x0 0x2 #define MX93_PAD_PDM_BIT_STREAM0__MQS1_RIGHT 0x0194 0x0344 0x0000 0x1 0x0 #define MX93_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1 0x0194 0x0344 0x0000 0x2 0x0 #define MX93_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK 0x0194 0x0344 0x0000 0x3 0x0 #define MX93_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2 0x0194 0x0344 0x0000 0x4 0x0 #define MX93_PAD_PDM_BIT_STREAM0__GPIO1_IO09 0x0194 0x0344 0x0000 0x5 0x0 #define MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x0194 0x0344 0x0360 0x6 0x0 -#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x0198 0x0348 0x0444 0x0 0x2 +#define MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x0198 0x0348 0x043C 0x0 0x2 #define MX93_PAD_PDM_BIT_STREAM1__NMI_GLUE_NMI 0x0198 0x0348 0x0000 0x1 0x0 #define MX93_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1 0x0198 0x0348 0x0000 0x2 0x0 #define MX93_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK 0x0198 0x0348 0x0000 0x3 0x0 @@ -614,7 +612,7 @@ #define MX93_PAD_SAI1_TXD0__CAN1_TX 0x01A4 0x0354 0x0000 0x4 0x0 #define MX93_PAD_SAI1_TXD0__GPIO1_IO13 0x01A4 0x0354 0x0000 0x5 0x0 #define MX93_PAD_SAI1_RXD0__SAI1_RX_DATA00 0x01A8 0x0358 0x0000 0x0 0x0 -#define MX93_PAD_SAI1_RXD0__SAI1_MCLK 0x01A8 0x0358 0x0450 0x1 0x1 +#define MX93_PAD_SAI1_RXD0__SAI1_MCLK 0x01A8 0x0358 0x0448 0x1 0x1 #define MX93_PAD_SAI1_RXD0__LPSPI1_SOUT 0x01A8 0x0358 0x0000 0x2 0x0 #define MX93_PAD_SAI1_RXD0__LPUART2_DSR_B 0x01A8 0x0358 0x0000 0x3 0x0 #define MX93_PAD_SAI1_RXD0__MQS1_RIGHT 0x01A8 0x0358 0x0000 0x4 0x0 diff --git a/arch/arm/dts/imx93.dtsi b/arch/arm/dts/imx93.dtsi index 28026ccecc8..13cf32d4b27 100644 --- a/arch/arm/dts/imx93.dtsi +++ b/arch/arm/dts/imx93.dtsi @@ -1,15 +1,14 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright 2021 NXP + * Copyright 2022 NXP */ #include <dt-bindings/clock/imx93-clock.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/power/fsl,imx93-power.h> #include <dt-bindings/thermal/thermal.h> -#include <dt-bindings/power/imx93-power.h> -#include <dt-bindings/usb/pd.h> #include "imx93-pinfunc.h" @@ -23,11 +22,17 @@ gpio1 = &gpio2; gpio2 = &gpio3; gpio3 = &gpio4; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + i2c6 = &lpi2c7; + i2c7 = &lpi2c8; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; - ethernet0 = &fec; - ethernet1 = &eqos; serial0 = &lpuart1; serial1 = &lpuart2; serial2 = &lpuart3; @@ -36,14 +41,6 @@ serial5 = &lpuart6; serial6 = &lpuart7; serial7 = &lpuart8; - i2c0 = &lpi2c1; - i2c1 = &lpi2c2; - i2c2 = &lpi2c3; - i2c3 = &lpi2c4; - i2c4 = &lpi2c5; - i2c5 = &lpi2c6; - usb0 = &usbotg1; - usb1 = &usbotg2; }; cpus { @@ -89,6 +86,11 @@ clock-output-names = "clk_ext1"; }; + pmu { + compatible = "arm,cortex-a55-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -115,6 +117,38 @@ interrupt-parent = <&gic>; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <80000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc@0 { compatible = "simple-bus"; #address-cells = <1>; @@ -129,46 +163,53 @@ #size-cells = <1>; ranges; + anomix_ns_gpr: syscon@44210000 { + compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon"; + reg = <0x44210000 0x1000>; + }; + mu1: mailbox@44230000 { compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; reg = <0x44230000 0x10000>; interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_MU1_B_GATE>; #mbox-cells = <2>; status = "disabled"; }; - anomix_ns_gpr: blk-ctrl-anomix@42420000 { - compatible = "syscon"; - reg = <0x44210000 0x1000>; - }; - system_counter: timer@44290000 { compatible = "nxp,sysctr-timer"; reg = <0x44290000 0x30000>; interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc_24m>; clock-names = "per"; + nxp,no-divider; }; - i3c1: i3c-master@44330000 { - #address-cells = <3>; - #size-cells = <0>; - compatible = "fsl,imx93-i3c-master", "silvaco,i3c-master"; - reg = <0x44330000 0x10000>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_I3C1_GATE>, - <&clk IMX93_CLK_I3C1_GATE>, - <&clk IMX93_CLK_DUMMY>; - clock-names = "pclk", "fast_clk", "slow_clk"; + tpm1: pwm@44310000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x44310000 0x1000>; + clocks = <&clk IMX93_CLK_TPM1_GATE>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm2: pwm@44320000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x44320000 0x10000>; + clocks = <&clk IMX93_CLK_TPM2_GATE>; + #pwm-cells = <3>; status = "disabled"; }; lpi2c1: i2c@44340000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x44340000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C1_GATE>, - <&clk IMX93_CLK_LPI2C1_GATE>; + <&clk IMX93_CLK_BUS_AON>; clock-names = "per", "ipg"; status = "disabled"; }; @@ -176,9 +217,11 @@ lpi2c2: i2c@44350000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x44350000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C2_GATE>, - <&clk IMX93_CLK_LPI2C2_GATE>; + <&clk IMX93_CLK_BUS_AON>; clock-names = "per", "ipg"; status = "disabled"; }; @@ -190,7 +233,7 @@ reg = <0x44360000 0x10000>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPSPI1_GATE>, - <&clk IMX93_CLK_LPSPI1_GATE>; + <&clk IMX93_CLK_BUS_AON>; clock-names = "per", "ipg"; status = "disabled"; }; @@ -202,14 +245,13 @@ reg = <0x44370000 0x10000>; interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPSPI2_GATE>, - <&clk IMX93_CLK_LPSPI2_GATE>; + <&clk IMX93_CLK_BUS_AON>; clock-names = "per", "ipg"; status = "disabled"; }; lpuart1: serial@44380000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44380000 0x1000>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART1_GATE>; @@ -218,8 +260,7 @@ }; lpuart2: serial@44390000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x44390000 0x1000>; interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART2_GATE>; @@ -227,9 +268,40 @@ status = "disabled"; }; + flexcan1: can@443a0000 { + compatible = "fsl,imx93-flexcan"; + reg = <0x443a0000 0x10000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_BUS_AON>, + <&clk IMX93_CLK_CAN1_GATE>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX93_CLK_CAN1>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + iomuxc: pinctrl@443c0000 { compatible = "fsl,imx93-iomuxc"; reg = <0x443c0000 0x10000>; + status = "okay"; + }; + + bbnsm: bbnsm@44440000 { + compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; + reg = <0x44440000 0x10000>; + + bbnsm_rtc: rtc { + compatible = "nxp,imx93-bbnsm-rtc"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + bbnsm_pwrkey: pwrkey { + compatible = "nxp,imx93-bbnsm-pwrkey"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + linux,code = <KEY_POWER>; + }; }; clk: clock-controller@44450000 { @@ -238,25 +310,63 @@ #clock-cells = <1>; clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>; clock-names = "osc_32k", "osc_24m", "clk_ext1"; - assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>; - assigned-clock-rates = <393216000>; status = "okay"; }; + src: system-controller@44460000 { + compatible = "fsl,imx93-src", "syscon"; + reg = <0x44460000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + mediamix: power-domain@44462400 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44462400 0x400>, <0x44465800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_MEDIA_APB>; + }; + + mlmix: power-domain@44461800 { + compatible = "fsl,imx93-src-slice"; + reg = <0x44461800 0x400>, <0x44464800 0x400>; + #power-domain-cells = <0>; + clocks = <&clk IMX93_CLK_ML_APB>, + <&clk IMX93_CLK_ML>; + }; + }; + anatop: anatop@44480000 { compatible = "fsl,imx93-anatop", "syscon"; reg = <0x44480000 0x10000>; }; + tmu: tmu@44482000 { + compatible = "fsl,imx93-tmu"; + reg = <0x44482000 0x1000>; + clocks = <&clk IMX93_CLK_TMC_GATE>; + little-endian; + fsl,tmu-calibration = <0x0000000e 0x800000da + 0x00000029 0x800000e9 + 0x00000056 0x80000102 + 0x000000a2 0x8000012a + 0x00000116 0x80000166 + 0x00000195 0x800001a7 + 0x000001b2 0x800001b6>; + #thermal-sensor-cells = <1>; + }; + adc1: adc@44530000 { compatible = "nxp,imx93-adc"; reg = <0x44530000 0x10000>; interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_ADC1_GATE>; clock-names = "ipg"; + #io-channel-cells = <1>; status = "disabled"; }; }; @@ -268,8 +378,8 @@ #size-cells = <1>; ranges; - wakeupmix_gpr: blk-ctrl-wakeupmix@42420000 { - compatible = "syscon"; + wakeupmix_gpr: syscon@42420000 { + compatible = "fsl,imx93-wakeupmix-syscfg", "syscon"; reg = <0x42420000 0x1000>; }; @@ -277,6 +387,7 @@ compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu"; reg = <0x42440000 0x10000>; interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_MU2_B_GATE>; #mbox-cells = <2>; status = "disabled"; }; @@ -287,39 +398,48 @@ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_WDOG3_GATE>; timeout-sec = <40>; + }; + + tpm3: pwm@424e0000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x424e0000 0x1000>; + clocks = <&clk IMX93_CLK_TPM3_GATE>; + #pwm-cells = <3>; status = "disabled"; }; tpm4: pwm@424f0000 { compatible = "fsl,imx7ulp-pwm"; - reg = <0x424f0000 0x1000>; + reg = <0x424f0000 0x10000>; clocks = <&clk IMX93_CLK_TPM4_GATE>; - assigned-clocks = <&clk IMX93_CLK_TPM4>; - assigned-clock-parents = <&clk IMX93_CLK_24M>; - assigned-clock-rates = <24000000>; #pwm-cells = <3>; status = "disabled"; }; - i3c2: i3c-master@42520000 { - #address-cells = <3>; - #size-cells = <0>; - compatible = "fsl,imx93-i3c-master", "silvaco,i3c-master"; - reg = <0x42520000 0x10000>; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_I3C2_GATE>, - <&clk IMX93_CLK_I3C2_GATE>, - <&clk IMX93_CLK_DUMMY>; - clock-names = "pclk", "fast_clk", "slow_clk"; + tpm5: pwm@42500000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x42500000 0x10000>; + clocks = <&clk IMX93_CLK_TPM5_GATE>; + #pwm-cells = <3>; + status = "disabled"; + }; + + tpm6: pwm@42510000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x42510000 0x10000>; + clocks = <&clk IMX93_CLK_TPM6_GATE>; + #pwm-cells = <3>; status = "disabled"; }; lpi2c3: i2c@42530000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x42530000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C3_GATE>, - <&clk IMX93_CLK_LPI2C3_GATE>; + <&clk IMX93_CLK_BUS_WAKEUP>; clock-names = "per", "ipg"; status = "disabled"; }; @@ -327,9 +447,11 @@ lpi2c4: i2c@42540000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x42540000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C4_GATE>, - <&clk IMX93_CLK_LPI2C4_GATE>; + <&clk IMX93_CLK_BUS_WAKEUP>; clock-names = "per", "ipg"; status = "disabled"; }; @@ -341,7 +463,7 @@ reg = <0x42550000 0x10000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPSPI3_GATE>, - <&clk IMX93_CLK_LPSPI3_GATE>; + <&clk IMX93_CLK_BUS_WAKEUP>; clock-names = "per", "ipg"; status = "disabled"; }; @@ -353,14 +475,13 @@ reg = <0x42560000 0x10000>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPSPI4_GATE>, - <&clk IMX93_CLK_LPSPI4_GATE>; + <&clk IMX93_CLK_BUS_WAKEUP>; clock-names = "per", "ipg"; status = "disabled"; }; lpuart3: serial@42570000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42570000 0x1000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART3_GATE>; @@ -369,8 +490,7 @@ }; lpuart4: serial@42580000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42580000 0x1000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART4_GATE>; @@ -379,8 +499,7 @@ }; lpuart5: serial@42590000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42590000 0x1000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART5_GATE>; @@ -389,8 +508,7 @@ }; lpuart6: serial@425a0000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x425a0000 0x1000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART6_GATE>; @@ -398,22 +516,37 @@ status = "disabled"; }; - flexspi: spi@425e0000 { - #address-cells = <1>; - #size-cells = <0>; + flexcan2: can@425b0000 { + compatible = "fsl,imx93-flexcan"; + reg = <0x425b0000 0x10000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_CAN2_GATE>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX93_CLK_CAN2>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + status = "disabled"; + }; + + flexspi1: spi@425e0000 { compatible = "nxp,imx8mm-fspi"; reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>; - clock-names = "fspi", "fspi_en"; + clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>, + <&clk IMX93_CLK_FLEXSPI1_GATE>; + clock-names = "fspi_en", "fspi"; + assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>; status = "disabled"; }; lpuart7: serial@42690000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x42690000 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART7_GATE>; @@ -422,8 +555,7 @@ }; lpuart8: serial@426a0000 { - compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", - "fsl,imx7ulp-lpuart"; + compatible = "fsl,imx93-lpuart", "fsl,imx7ulp-lpuart"; reg = <0x426a0000 0x1000>; interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPUART8_GATE>; @@ -434,9 +566,11 @@ lpi2c5: i2c@426b0000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x426b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C5_GATE>, - <&clk IMX93_CLK_LPI2C5_GATE>; + <&clk IMX93_CLK_BUS_WAKEUP>; clock-names = "per", "ipg"; status = "disabled"; }; @@ -444,12 +578,87 @@ lpi2c6: i2c@426c0000 { compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; reg = <0x426c0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clk IMX93_CLK_LPI2C6_GATE>, - <&clk IMX93_CLK_LPI2C6_GATE>; + <&clk IMX93_CLK_BUS_WAKEUP>; clock-names = "per", "ipg"; status = "disabled"; }; + + lpi2c7: i2c@426d0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426d0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C7_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpi2c8: i2c@426e0000 { + compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x426e0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPI2C8_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi5: spi@426f0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x426f0000 0x10000>; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI5_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi6: spi@42700000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x42700000 0x10000>; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI6_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi7: spi@42710000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x42710000 0x10000>; + interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI7_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + + lpspi8: spi@42720000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi"; + reg = <0x42720000 0x10000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_LPSPI8_GATE>, + <&clk IMX93_CLK_BUS_WAKEUP>; + clock-names = "per", "ipg"; + status = "disabled"; + }; + }; aips3: bus@42800000 { @@ -463,8 +672,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x42850000 0x10000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC1_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <8>; @@ -477,8 +686,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x42860000 0x10000>; interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC2_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -487,15 +696,37 @@ status = "disabled"; }; + eqos: ethernet@428a0000 { + compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x428a0000 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq"; + clocks = <&clk IMX93_CLK_ENET_QOS_GATE>, + <&clk IMX93_CLK_ENET_QOS_GATE>, + <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>, + <&clk IMX93_CLK_ENET_QOS_GATE>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; + assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, + <&clk IMX93_CLK_ENET>; + assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, + <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; + assigned-clock-rates = <100000000>, <250000000>; + intf_mode = <&wakeupmix_gpr 0x28>; + snps,clk-csr = <0>; + status = "disabled"; + }; + fec: ethernet@42890000 { - compatible = "fsl,imx93-fec", "fsl,imx8mp-fec", "fsl,imx8mq-fec"; + compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x42890000 0x10000>; interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_WAKEUP_AXI>, - <&clk IMX93_CLK_WAKEUP_AXI>, + clocks = <&clk IMX93_CLK_ENET1_GATE>, + <&clk IMX93_CLK_ENET1_GATE>, <&clk IMX93_CLK_ENET_TIMER1>, <&clk IMX93_CLK_ENET_REF>, <&clk IMX93_CLK_ENET_REF_PHY>; @@ -510,29 +741,6 @@ assigned-clock-rates = <100000000>, <250000000>, <50000000>; fsl,num-tx-queues = <3>; fsl,num-rx-queues = <3>; - fsl,wakeup_irq = <2>; - status = "disabled"; - }; - - eqos: ethernet@428a0000 { - compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a"; - reg = <0x428a0000 0x10000>; - interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "eth_wake_irq", "macirq"; - clocks = <&clk IMX93_CLK_WAKEUP_AXI>, - <&clk IMX93_CLK_WAKEUP_AXI>, - <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>, - <&clk IMX93_CLK_WAKEUP_AXI>; - clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; - assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>, - <&clk IMX93_CLK_ENET>; - assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>, - <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>; - assigned-clock-rates = <100000000>, <250000000>; - intf_mode = <&wakeupmix_gpr 0x28>; - clk_csr = <0>; status = "disabled"; }; @@ -540,8 +748,8 @@ compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc"; reg = <0x428b0000 0x10000>; interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_DUMMY>, - <&clk IMX93_CLK_DUMMY>, + clocks = <&clk IMX93_CLK_BUS_WAKEUP>, + <&clk IMX93_CLK_WAKEUP_AXI>, <&clk IMX93_CLK_USDHC3_GATE>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; @@ -551,138 +759,90 @@ }; }; - gpio2: gpio@43810000 { - compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43810080 0x1000>, <0x43810040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 32 32>; + gpio2: gpio@43810080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43810080 0x1000>, <0x43810040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO2_GATE>, + <&clk IMX93_CLK_GPIO2_GATE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc 0 4 30>; }; - gpio3: gpio@43820000 { - compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43820080 0x1000>, <0x43820040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 64 32>; + gpio3: gpio@43820080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43820080 0x1000>, <0x43820040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO3_GATE>, + <&clk IMX93_CLK_GPIO3_GATE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>, + <&iomuxc 26 34 2>, <&iomuxc 28 0 4>; }; - gpio4: gpio@43830000 { - compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; - reg = <0x43830080 0x1000>, <0x43830040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 96 32>; + gpio4: gpio@43830080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x43830080 0x1000>, <0x43830040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO4_GATE>, + <&clk IMX93_CLK_GPIO4_GATE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>; }; - gpio1: gpio@47400000 { - compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio"; - reg = <0x47400080 0x1000>, <0x47400040 0x40>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 0 32>; + gpio1: gpio@47400080 { + compatible = "fsl,imx93-gpio", "fsl,imx7ulp-gpio"; + reg = <0x47400080 0x1000>, <0x47400040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + clocks = <&clk IMX93_CLK_GPIO1_GATE>, + <&clk IMX93_CLK_GPIO1_GATE>; + clock-names = "gpio", "port"; + gpio-ranges = <&iomuxc 0 92 16>; }; - ocotp: efuse@47510000 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx93-ocotp", "syscon"; - reg = <0x47510000 0x1000>; - status = "disabled"; - }; - - s4muap: s4muap@47520000 { + s4muap: mailbox@47520000 { compatible = "fsl,imx93-mu-s4"; reg = <0x47520000 0x10000>; interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "txirq", "rxirq"; + interrupt-names = "tx", "rx"; #mbox-cells = <2>; - status = "okay"; - }; - - sentnl_mu: sentnl-mu { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,imx-sentnl"; - mboxes = <&s4muap 0 0 &s4muap 1 0>; - mbox-names = "tx", "rx"; - fsl,sentnl_mu_id = <2>; - fsl,sentnl_mu_max_users = <4>; - status = "okay"; - dma-ranges = <0x80000000 0x80000000 0x20000000>; - }; - - ddr-pmu@4e300e00 { - compatible = "fsl,imx93-ddr-pmu"; - reg = <0x4e300dc0 0x200>; /* _dc0 ~ _eb8 */ - interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; }; - usbphynop1: usbphynop1 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>; - clock-names = "main_clk"; - }; - - usbotg1: usb@4c100000 { - compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; - reg = <0x4c100000 0x200>; - interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; - clock-names = "usb1_ctrl_root_clk"; - assigned-clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; - assigned-clock-parents = <&clk IMX93_CLK_HSIO>; - fsl,usbphy = <&usbphynop1>; - fsl,usbmisc = <&usbmisc1 0>; + media_blk_ctrl: system-controller@4ac10000 { + compatible = "fsl,imx93-media-blk-ctrl", "syscon"; + reg = <0x4ac10000 0x10000>; + power-domains = <&mediamix>; + clocks = <&clk IMX93_CLK_MEDIA_APB>, + <&clk IMX93_CLK_MEDIA_AXI>, + <&clk IMX93_CLK_NIC_MEDIA_GATE>, + <&clk IMX93_CLK_MEDIA_DISP_PIX>, + <&clk IMX93_CLK_CAM_PIX>, + <&clk IMX93_CLK_PXP_GATE>, + <&clk IMX93_CLK_LCDIF_GATE>, + <&clk IMX93_CLK_ISI_GATE>, + <&clk IMX93_CLK_MIPI_CSI_GATE>, + <&clk IMX93_CLK_MIPI_DSI_GATE>; + clock-names = "apb", "axi", "nic", "disp", "cam", + "pxp", "lcdif", "isi", "csi", "dsi"; + #power-domain-cells = <1>; status = "disabled"; }; - - usbmisc1: usbmisc@4c100200 { - compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; - #index-cells = <1>; - reg = <0x4c100200 0x200>; - }; - - usbphynop2: usbphynop2 { - compatible = "usb-nop-xceiv"; - clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>; - clock-names = "main_clk"; - }; - - usbotg2: usb@4c200000 { - compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb"; - reg = <0x4c200000 0x200>; - interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; - clock-names = "usb2_ctrl_root_clk"; - assigned-clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>; - assigned-clock-parents = <&clk IMX93_CLK_HSIO>; - fsl,usbphy = <&usbphynop2>; - fsl,usbmisc = <&usbmisc2 0>; - status = "disabled"; - }; - - usbmisc2: usbmisc@4c200200 { - compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc"; - #index-cells = <1>; - reg = <0x4c200200 0x200>; - }; }; }; diff --git a/arch/arm/include/asm/arch-imx/cpu.h b/arch/arm/include/asm/arch-imx/cpu.h index a666271fc11..cbd2717f97c 100644 --- a/arch/arm/include/asm/arch-imx/cpu.h +++ b/arch/arm/include/asm/arch-imx/cpu.h @@ -61,6 +61,13 @@ #define MXC_CPU_MX7ULP 0xE1 /* Temporally hard code */ #define MXC_CPU_VF610 0xF6 /* dummy ID */ #define MXC_CPU_IMX93 0xC1 /* dummy ID */ +#define MXC_CPU_IMX9351 0xC2 /* dummy ID */ +#define MXC_CPU_IMX9332 0xC3 /* dummy ID */ +#define MXC_CPU_IMX9331 0xC4 /* dummy ID */ +#define MXC_CPU_IMX9322 0xC5 /* dummy ID */ +#define MXC_CPU_IMX9321 0xC6 /* dummy ID */ +#define MXC_CPU_IMX9312 0xC7 /* dummy ID */ +#define MXC_CPU_IMX9311 0xC8 /* dummy ID */ #define MXC_SOC_MX6 0x60 #define MXC_SOC_MX7 0x70 diff --git a/arch/arm/include/asm/arch-imx8/power-domain.h b/arch/arm/include/asm/arch-imx8/power-domain.h index 1db86a1209b..bdb0baa9844 100644 --- a/arch/arm/include/asm/arch-imx8/power-domain.h +++ b/arch/arm/include/asm/arch-imx8/power-domain.h @@ -6,7 +6,7 @@ #ifndef _ASM_ARCH_IMX8_POWER_DOMAIN_H #define _ASM_ARCH_IMX8_POWER_DOMAIN_H -#include <asm/arch/sci/types.h> +#include <firmware/imx/sci/types.h> struct imx8_power_domain_plat { sc_rsrc_t resource_id; diff --git a/arch/arm/include/asm/arch-imx8/sci/rpc.h b/arch/arm/include/asm/arch-imx8/sci/rpc.h deleted file mode 100644 index 39de7f0e3e0..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/rpc.h +++ /dev/null @@ -1,230 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2017-2018 NXP - * - */ - -#ifndef SC_RPC_H -#define SC_RPC_H - -/* Note: Check SCFW API Released DOC before you want to modify something */ -/* Defines */ - -#define SCFW_API_VERSION_MAJOR 1U -#define SCFW_API_VERSION_MINOR 21U - -#define SC_RPC_VERSION 1U - -#define SC_RPC_MAX_MSG 8U - -#define RPC_VER(MSG) ((MSG)->version) -#define RPC_SIZE(MSG) ((MSG)->size) -#define RPC_SVC(MSG) ((MSG)->svc) -#define RPC_FUNC(MSG) ((MSG)->func) -#define RPC_R8(MSG) ((MSG)->func) -#define RPC_I64(MSG, IDX) ((s64)(RPC_U32((MSG), (IDX))) << 32ULL) | \ - (s64)(RPC_U32((MSG), (IDX) + 4U)) -#define RPC_I32(MSG, IDX) ((MSG)->DATA.i32[(IDX) / 4U]) -#define RPC_I16(MSG, IDX) ((MSG)->DATA.i16[(IDX) / 2U]) -#define RPC_I8(MSG, IDX) ((MSG)->DATA.i8[(IDX)]) -#define RPC_U64(MSG, IDX) ((u64)(RPC_U32((MSG), (IDX))) << 32ULL) | \ - (u64)(RPC_U32((MSG), (IDX) + 4U)) -#define RPC_U32(MSG, IDX) ((MSG)->DATA.u32[(IDX) / 4U]) -#define RPC_U16(MSG, IDX) ((MSG)->DATA.u16[(IDX) / 2U]) -#define RPC_U8(MSG, IDX) ((MSG)->DATA.u8[(IDX)]) - -#define SC_RPC_SVC_UNKNOWN 0U -#define SC_RPC_SVC_RETURN 1U -#define SC_RPC_SVC_PM 2U -#define SC_RPC_SVC_RM 3U -#define SC_RPC_SVC_TIMER 5U -#define SC_RPC_SVC_PAD 6U -#define SC_RPC_SVC_MISC 7U -#define SC_RPC_SVC_IRQ 8U -#define SC_RPC_SVC_SECO 9U -#define SC_RPC_SVC_ABORT 10U - - -/* Types */ - -struct sc_rpc_msg_s { - u8 version; - u8 size; - u8 svc; - u8 func; - union { - s32 i32[(SC_RPC_MAX_MSG - 1U)]; - s16 i16[(SC_RPC_MAX_MSG - 1U) * 2U]; - s8 i8[(SC_RPC_MAX_MSG - 1U) * 4U]; - u32 u32[(SC_RPC_MAX_MSG - 1U)]; - u16 u16[(SC_RPC_MAX_MSG - 1U) * 2U]; - u8 u8[(SC_RPC_MAX_MSG - 1U) * 4U]; - } DATA; -}; - -/* PM RPC */ -#define PM_FUNC_UNKNOWN 0 -#define PM_FUNC_SET_SYS_POWER_MODE 19U -#define PM_FUNC_SET_PARTITION_POWER_MODE 1U -#define PM_FUNC_GET_SYS_POWER_MODE 2U -#define PM_FUNC_SET_RESOURCE_POWER_MODE 3U -#define PM_FUNC_GET_RESOURCE_POWER_MODE 4U -#define PM_FUNC_REQ_LOW_POWER_MODE 16U -#define PM_FUNC_REQ_CPU_LOW_POWER_MODE 20U -#define PM_FUNC_SET_CPU_RESUME_ADDR 17U -#define PM_FUNC_SET_CPU_RESUME 21U -#define PM_FUNC_REQ_SYS_IF_POWER_MODE 18U -#define PM_FUNC_SET_CLOCK_RATE 5U -#define PM_FUNC_GET_CLOCK_RATE 6U -#define PM_FUNC_CLOCK_ENABLE 7U -#define PM_FUNC_SET_CLOCK_PARENT 14U -#define PM_FUNC_GET_CLOCK_PARENT 15U -#define PM_FUNC_RESET 13U -#define PM_FUNC_RESET_REASON 10U -#define PM_FUNC_BOOT 8U -#define PM_FUNC_REBOOT 9U -#define PM_FUNC_REBOOT_PARTITION 12U -#define PM_FUNC_CPU_START 11U -#define PM_FUNC_CPU_RESET 23U -#define PM_FUNC_RESOURCE_RESET 29U -#define PM_FUNC_IS_PARTITION_STARTED 24U - -/* MISC RPC */ -#define MISC_FUNC_UNKNOWN 0 -#define MISC_FUNC_SET_CONTROL 1U -#define MISC_FUNC_GET_CONTROL 2U -#define MISC_FUNC_SET_MAX_DMA_GROUP 4U -#define MISC_FUNC_SET_DMA_GROUP 5U -#define MISC_FUNC_SECO_IMAGE_LOAD 8U -#define MISC_FUNC_SECO_AUTHENTICATE 9U -#define MISC_FUNC_SECO_FUSE_WRITE 20U -#define MISC_FUNC_SECO_ENABLE_DEBUG 21U -#define MISC_FUNC_SECO_FORWARD_LIFECYCLE 22U -#define MISC_FUNC_SECO_RETURN_LIFECYCLE 23U -#define MISC_FUNC_SECO_BUILD_INFO 24U -#define MISC_FUNC_DEBUG_OUT 10U -#define MISC_FUNC_WAVEFORM_CAPTURE 6U -#define MISC_FUNC_BUILD_INFO 15U -#define MISC_FUNC_UNIQUE_ID 19U -#define MISC_FUNC_SET_ARI 3U -#define MISC_FUNC_BOOT_STATUS 7U -#define MISC_FUNC_BOOT_DONE 14U -#define MISC_FUNC_OTP_FUSE_READ 11U -#define MISC_FUNC_OTP_FUSE_WRITE 17U -#define MISC_FUNC_SET_TEMP 12U -#define MISC_FUNC_GET_TEMP 13U -#define MISC_FUNC_GET_BOOT_DEV 16U -#define MISC_FUNC_GET_BUTTON_STATUS 18U -#define MISC_FUNC_GET_BOOT_CONTAINER 36U - -/* PAD RPC */ -#define PAD_FUNC_UNKNOWN 0 -#define PAD_FUNC_SET_MUX 1U -#define PAD_FUNC_GET_MUX 6U -#define PAD_FUNC_SET_GP 2U -#define PAD_FUNC_GET_GP 7U -#define PAD_FUNC_SET_WAKEUP 4U -#define PAD_FUNC_GET_WAKEUP 9U -#define PAD_FUNC_SET_ALL 5U -#define PAD_FUNC_GET_ALL 10U -#define PAD_FUNC_SET 15U -#define PAD_FUNC_GET 16U -#define PAD_FUNC_SET_GP_28FDSOI 11U -#define PAD_FUNC_GET_GP_28FDSOI 12U -#define PAD_FUNC_SET_GP_28FDSOI_HSIC 3U -#define PAD_FUNC_GET_GP_28FDSOI_HSIC 8U -#define PAD_FUNC_SET_GP_28FDSOI_COMP 13U -#define PAD_FUNC_GET_GP_28FDSOI_COMP 14U - -/* RM RPC */ -#define RM_FUNC_UNKNOWN 0 -#define RM_FUNC_PARTITION_ALLOC 1U -#define RM_FUNC_SET_CONFIDENTIAL 31U -#define RM_FUNC_PARTITION_FREE 2U -#define RM_FUNC_GET_DID 26U -#define RM_FUNC_PARTITION_STATIC 3U -#define RM_FUNC_PARTITION_LOCK 4U -#define RM_FUNC_GET_PARTITION 5U -#define RM_FUNC_SET_PARENT 6U -#define RM_FUNC_MOVE_ALL 7U -#define RM_FUNC_ASSIGN_RESOURCE 8U -#define RM_FUNC_SET_RESOURCE_MOVABLE 9U -#define RM_FUNC_SET_SUBSYS_RSRC_MOVABLE 28U -#define RM_FUNC_SET_MASTER_ATTRIBUTES 10U -#define RM_FUNC_SET_MASTER_SID 11U -#define RM_FUNC_SET_PERIPHERAL_PERMISSIONS 12U -#define RM_FUNC_IS_RESOURCE_OWNED 13U -#define RM_FUNC_GET_RESOURCE_OWNER 33U -#define RM_FUNC_IS_RESOURCE_MASTER 14U -#define RM_FUNC_IS_RESOURCE_PERIPHERAL 15U -#define RM_FUNC_GET_RESOURCE_INFO 16U -#define RM_FUNC_MEMREG_ALLOC 17U -#define RM_FUNC_MEMREG_SPLIT 29U -#define RM_FUNC_MEMREG_FREE 18U -#define RM_FUNC_FIND_MEMREG 30U -#define RM_FUNC_ASSIGN_MEMREG 19U -#define RM_FUNC_SET_MEMREG_PERMISSIONS 20U -#define RM_FUNC_IS_MEMREG_OWNED 21U -#define RM_FUNC_GET_MEMREG_INFO 22U -#define RM_FUNC_ASSIGN_PAD 23U -#define RM_FUNC_SET_PAD_MOVABLE 24U -#define RM_FUNC_IS_PAD_OWNED 25U -#define RM_FUNC_DUMP 27U - -/* SECO RPC */ -#define SECO_FUNC_UNKNOWN 0 /* Unknown function */ -#define SECO_FUNC_IMAGE_LOAD 1U /* Index for seco_image_load() RPC call */ -#define SECO_FUNC_AUTHENTICATE 2U /* Index for seco_authenticate() RPC call */ -#define SECO_FUNC_ENH_AUTHENTICATE 24U /* Index for sc_seco_enh_authenticate() RPC call */ -#define SECO_FUNC_FORWARD_LIFECYCLE 3U /* Index for seco_forward_lifecycle() RPC call */ -#define SECO_FUNC_RETURN_LIFECYCLE 4U /* Index for seco_return_lifecycle() RPC call */ -#define SECO_FUNC_COMMIT 5U /* Index for seco_commit() RPC call */ -#define SECO_FUNC_ATTEST_MODE 6U /* Index for seco_attest_mode() RPC call */ -#define SECO_FUNC_ATTEST 7U /* Index for seco_attest() RPC call */ -#define SECO_FUNC_GET_ATTEST_PKEY 8U /* Index for seco_get_attest_pkey() RPC call */ -#define SECO_FUNC_GET_ATTEST_SIGN 9U /* Index for seco_get_attest_sign() RPC call */ -#define SECO_FUNC_ATTEST_VERIFY 10U /* Index for seco_attest_verify() RPC call */ -#define SECO_FUNC_GEN_KEY_BLOB 11U /* Index for seco_gen_key_blob() RPC call */ -#define SECO_FUNC_LOAD_KEY 12U /* Index for seco_load_key() RPC call */ -#define SECO_FUNC_GET_MP_KEY 13U /* Index for seco_get_mp_key() RPC call */ -#define SECO_FUNC_UPDATE_MPMR 14U /* Index for seco_update_mpmr() RPC call */ -#define SECO_FUNC_GET_MP_SIGN 15U /* Index for seco_get_mp_sign() RPC call */ -#define SECO_FUNC_BUILD_INFO 16U /* Index for seco_build_info() RPC call */ -#define SECO_FUNC_CHIP_INFO 17U /* Index for seco_chip_info() RPC call */ -#define SECO_FUNC_ENABLE_DEBUG 18U /* Index for seco_enable_debug() RPC call */ -#define SECO_FUNC_GET_EVENT 19U /* Index for seco_get_event() RPC call */ -#define SECO_FUNC_FUSE_WRITE 20U /* Index for seco_fuse_write() RPC call */ -#define SECO_FUNC_PATCH 21U /* Index for sc_seco_patch() RPC call */ -#define SECO_FUNC_START_RNG 22U /* Index for sc_seco_start_rng() RPC call */ -#define SECO_FUNC_SAB_MSG 23U /* Index for sc_seco_sab_msg() RPC call */ -#define SECO_FUNC_SECVIO_ENABLE 25U /* Index for sc_seco_secvio_enable() RPC call */ -#define SECO_FUNC_SECVIO_CONFIG 26U /* Index for sc_seco_secvio_config() RPC call */ -#define SECO_FUNC_SECVIO_DGO_CONFIG 27U /* Index for sc_seco_secvio_dgo_config() RPC call */ - -/* IRQ RPC */ -#define IRQ_FUNC_UNKNOWN 0 /* Unknown function */ -#define IRQ_FUNC_ENABLE 1U /* Index for sc_irq_enable() RPC call */ -#define IRQ_FUNC_STATUS 2U /* Index for sc_irq_status() RPC call */ - -/* TIMER RPC */ -#define TIMER_FUNC_UNKNOWN 0 /* Unknown function */ -#define TIMER_FUNC_SET_WDOG_TIMEOUT 1U /* Index for sc_timer_set_wdog_timeout() RPC call */ -#define TIMER_FUNC_SET_WDOG_PRE_TIMEOUT 12U /* Index for sc_timer_set_wdog_pre_timeout() RPC call */ -#define TIMER_FUNC_START_WDOG 2U /* Index for sc_timer_start_wdog() RPC call */ -#define TIMER_FUNC_STOP_WDOG 3U /* Index for sc_timer_stop_wdog() RPC call */ -#define TIMER_FUNC_PING_WDOG 4U /* Index for sc_timer_ping_wdog() RPC call */ -#define TIMER_FUNC_GET_WDOG_STATUS 5U /* Index for sc_timer_get_wdog_status() RPC call */ -#define TIMER_FUNC_PT_GET_WDOG_STATUS 13U /* Index for sc_timer_pt_get_wdog_status() RPC call */ -#define TIMER_FUNC_SET_WDOG_ACTION 10U /* Index for sc_timer_set_wdog_action() RPC call */ -#define TIMER_FUNC_SET_RTC_TIME 6U /* Index for sc_timer_set_rtc_time() RPC call */ -#define TIMER_FUNC_GET_RTC_TIME 7U /* Index for sc_timer_get_rtc_time() RPC call */ -#define TIMER_FUNC_GET_RTC_SEC1970 9U /* Index for sc_timer_get_rtc_sec1970() RPC call */ -#define TIMER_FUNC_SET_RTC_ALARM 8U /* Index for sc_timer_set_rtc_alarm() RPC call */ -#define TIMER_FUNC_SET_RTC_PERIODIC_ALARM 14U /* Index for sc_timer_set_rtc_periodic_alarm() RPC call */ -#define TIMER_FUNC_CANCEL_RTC_ALARM 15U /* Index for sc_timer_cancel_rtc_alarm() RPC call */ -#define TIMER_FUNC_SET_RTC_CALB 11U /* Index for sc_timer_set_rtc_calb() RPC call */ -#define TIMER_FUNC_SET_SYSCTR_ALARM 16U /* Index for sc_timer_set_sysctr_alarm() RPC call */ -#define TIMER_FUNC_SET_SYSCTR_PERIODIC_ALARM 17U /* Index for sc_timer_set_sysctr_periodic_alarm() RPC call */ -#define TIMER_FUNC_CANCEL_SYSCTR_ALARM 18U /* Index for sc_timer_cancel_sysctr_alarm() RPC call */ - -#endif /* SC_RPC_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/sci.h b/arch/arm/include/asm/arch-imx8/sci/sci.h deleted file mode 100644 index 1c29209b399..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/sci.h +++ /dev/null @@ -1,138 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef _SC_SCI_H -#define _SC_SCI_H - -#include <log.h> -#include <asm/arch/sci/types.h> -#include <asm/arch/sci/svc/misc/api.h> -#include <asm/arch/sci/svc/pad/api.h> -#include <asm/arch/sci/svc/pm/api.h> -#include <asm/arch/sci/svc/rm/api.h> -#include <asm/arch/sci/svc/seco/api.h> -#include <asm/arch/sci/rpc.h> -#include <dt-bindings/soc/imx_rsrc.h> -#include <linux/errno.h> - -static inline int sc_err_to_linux(sc_err_t err) -{ - int ret; - - switch (err) { - case SC_ERR_NONE: - return 0; - case SC_ERR_VERSION: - case SC_ERR_CONFIG: - case SC_ERR_PARM: - ret = -EINVAL; - break; - case SC_ERR_NOACCESS: - case SC_ERR_LOCKED: - case SC_ERR_UNAVAILABLE: - ret = -EACCES; - break; - case SC_ERR_NOTFOUND: - case SC_ERR_NOPOWER: - ret = -ENODEV; - break; - case SC_ERR_IPC: - ret = -EIO; - break; - case SC_ERR_BUSY: - ret = -EBUSY; - break; - case SC_ERR_FAIL: - ret = -EIO; - break; - default: - ret = 0; - break; - } - - debug("%s %d %d\n", __func__, err, ret); - - return ret; -} - -/* PM API*/ -int sc_pm_set_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource, - sc_pm_power_mode_t mode); -int sc_pm_get_resource_power_mode(sc_ipc_t ipc, sc_rsrc_t resource, - sc_pm_power_mode_t *mode); -int sc_pm_set_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, - sc_pm_clock_rate_t *rate); -int sc_pm_get_clock_rate(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, - sc_pm_clock_rate_t *rate); -int sc_pm_clock_enable(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, - sc_bool_t enable, sc_bool_t autog); -int sc_pm_set_clock_parent(sc_ipc_t ipc, sc_rsrc_t resource, sc_pm_clk_t clk, - sc_pm_clk_parent_t parent); -int sc_pm_cpu_start(sc_ipc_t ipc, sc_rsrc_t resource, sc_bool_t enable, - sc_faddr_t address); -sc_bool_t sc_pm_is_partition_started(sc_ipc_t ipc, sc_rm_pt_t pt); -int sc_pm_resource_reset(sc_ipc_t ipc, sc_rsrc_t resource); - -/* MISC API */ -int sc_misc_set_control(sc_ipc_t ipc, sc_rsrc_t resource, - sc_ctrl_t ctrl, u32 val); -int sc_misc_get_control(sc_ipc_t ipc, sc_rsrc_t resource, sc_ctrl_t ctrl, - u32 *val); -void sc_misc_get_boot_dev(sc_ipc_t ipc, sc_rsrc_t *boot_dev); -void sc_misc_boot_status(sc_ipc_t ipc, sc_misc_boot_status_t status); -int sc_misc_get_boot_container(sc_ipc_t ipc, u8 *idx); -void sc_misc_build_info(sc_ipc_t ipc, u32 *build, u32 *commit); -int sc_misc_otp_fuse_read(sc_ipc_t ipc, u32 word, u32 *val); -int sc_misc_get_temp(sc_ipc_t ipc, sc_rsrc_t resource, sc_misc_temp_t temp, - s16 *celsius, s8 *tenths); - -/* RM API */ -sc_bool_t sc_rm_is_memreg_owned(sc_ipc_t ipc, sc_rm_mr_t mr); -int sc_rm_find_memreg(sc_ipc_t ipc, sc_rm_mr_t *mr, sc_faddr_t addr_start, - sc_faddr_t addr_end); -int sc_rm_set_memreg_permissions(sc_ipc_t ipc, sc_rm_mr_t mr, - sc_rm_pt_t pt, sc_rm_perm_t perm); -int sc_rm_get_memreg_info(sc_ipc_t ipc, sc_rm_mr_t mr, sc_faddr_t *addr_start, - sc_faddr_t *addr_end); -sc_bool_t sc_rm_is_resource_owned(sc_ipc_t ipc, sc_rsrc_t resource); -int sc_rm_partition_alloc(sc_ipc_t ipc, sc_rm_pt_t *pt, sc_bool_t secure, - sc_bool_t isolated, sc_bool_t restricted, - sc_bool_t grant, sc_bool_t coherent); -int sc_rm_partition_free(sc_ipc_t ipc, sc_rm_pt_t pt); -int sc_rm_get_partition(sc_ipc_t ipc, sc_rm_pt_t *pt); -int sc_rm_set_parent(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rm_pt_t pt_parent); -int sc_rm_assign_resource(sc_ipc_t ipc, sc_rm_pt_t pt, sc_rsrc_t resource); -int sc_rm_assign_pad(sc_ipc_t ipc, sc_rm_pt_t pt, sc_pad_t pad); -sc_bool_t sc_rm_is_pad_owned(sc_ipc_t ipc, sc_pad_t pad); -int sc_rm_get_resource_owner(sc_ipc_t ipc, sc_rsrc_t resource, - sc_rm_pt_t *pt); - -/* PAD API */ -int sc_pad_set(sc_ipc_t ipc, sc_pad_t pad, u32 val); -int sc_pad_get(sc_ipc_t ipc, sc_pad_t pad, uint32_t *val); - -/* SMMU API */ -int sc_rm_set_master_sid(sc_ipc_t ipc, sc_rsrc_t resource, sc_rm_sid_t sid); - -/* SECO API */ -int sc_seco_authenticate(sc_ipc_t ipc, sc_seco_auth_cmd_t cmd, - sc_faddr_t addr); -int sc_seco_forward_lifecycle(sc_ipc_t ipc, u32 change); -int sc_seco_chip_info(sc_ipc_t ipc, u16 *lc, u16 *monotonic, u32 *uid_l, - u32 *uid_h); -void sc_seco_build_info(sc_ipc_t ipc, u32 *version, u32 *commit); -int sc_seco_get_event(sc_ipc_t ipc, u8 idx, u32 *event); -int sc_seco_gen_key_blob(sc_ipc_t ipc, u32 id, sc_faddr_t load_addr, - sc_faddr_t export_addr, u16 max_size); -int sc_seco_get_mp_key(sc_ipc_t ipc, sc_faddr_t dst_addr, u16 dst_size); -int sc_seco_update_mpmr(sc_ipc_t ipc, sc_faddr_t addr, u8 size, u8 lock); -int sc_seco_get_mp_sign(sc_ipc_t ipc, sc_faddr_t msg_addr, - u16 msg_size, sc_faddr_t dst_addr, u16 dst_size); -int sc_seco_secvio_dgo_config(sc_ipc_t ipc, u8 id, u8 access, u32 *data); -int sc_seco_secvio_config(sc_ipc_t ipc, u8 id, u8 access, - u32 *data0, u32 *data1, u32 *data2, u32 *data3, - u32 *data4, u8 size); - -#endif diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h deleted file mode 100644 index 3629eb68d7a..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/misc/api.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_MISC_API_H -#define SC_MISC_API_H - -/* Defines for sc_misc_boot_status_t */ -#define SC_MISC_BOOT_STATUS_SUCCESS 0U /* Success */ -#define SC_MISC_BOOT_STATUS_SECURITY 1U /* Security violation */ - -/* Defines for sc_misc_seco_auth_cmd_t */ -#define SC_MISC_SECO_AUTH_SECO_FW 0U /* SECO Firmware */ -#define SC_MISC_SECO_AUTH_HDMI_TX_FW 1U /* HDMI TX Firmware */ -#define SC_MISC_SECO_AUTH_HDMI_RX_FW 2U /* HDMI RX Firmware */ - -/* Defines for sc_misc_temp_t */ -#define SC_MISC_TEMP 0U /* Temp sensor */ -#define SC_MISC_TEMP_HIGH 1U /* Temp high alarm */ -#define SC_MISC_TEMP_LOW 2U /* Temp low alarm */ - -/* Defines for sc_misc_seco_auth_cmd_t */ -#define SC_MISC_AUTH_CONTAINER 0U /* Authenticate container */ -#define SC_MISC_VERIFY_IMAGE 1U /* Verify image */ -#define SC_MISC_REL_CONTAINER 2U /* Release container */ - -typedef u8 sc_misc_boot_status_t; -typedef u8 sc_misc_temp_t; - -#endif /* SC_MISC_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h deleted file mode 100644 index df368e8c8b5..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/pad/api.h +++ /dev/null @@ -1,60 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_PAD_API_H -#define SC_PAD_API_H - -/* Defines for type widths */ -#define SC_PAD_MUX_W 3U /* Width of mux parameter */ - -/* Defines for sc_pad_config_t */ -#define SC_PAD_CONFIG_NORMAL 0U /* Normal */ -#define SC_PAD_CONFIG_OD 1U /* Open Drain */ -#define SC_PAD_CONFIG_OD_IN 2U /* Open Drain and input */ -#define SC_PAD_CONFIG_OUT_IN 3U /* Output and input */ - -/* Defines for sc_pad_iso_t */ -#define SC_PAD_ISO_OFF 0U /* ISO latch is transparent */ -#define SC_PAD_ISO_EARLY 1U /* Follow EARLY_ISO */ -#define SC_PAD_ISO_LATE 2U /* Follow LATE_ISO */ -#define SC_PAD_ISO_ON 3U /* ISO latched data is held */ - -/* Defines for sc_pad_28fdsoi_dse_t */ -#define SC_PAD_28FDSOI_DSE_18V_1MA 0U /* Drive strength of 1mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_2MA 1U /* Drive strength of 2mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_4MA 2U /* Drive strength of 4mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_6MA 3U /* Drive strength of 6mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_8MA 4U /* Drive strength of 8mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_10MA 5U /* Drive strength of 10mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_12MA 6U /* Drive strength of 12mA for 1.8v */ -#define SC_PAD_28FDSOI_DSE_18V_HS 7U /* High-speed for 1.8v */ -#define SC_PAD_28FDSOI_DSE_33V_2MA 0U /* Drive strength of 2mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_33V_4MA 1U /* Drive strength of 4mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_33V_8MA 2U /* Drive strength of 8mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_33V_12MA 3U /* Drive strength of 12mA for 3.3v */ -#define SC_PAD_28FDSOI_DSE_DV_HIGH 0U /* High drive strength dual volt */ -#define SC_PAD_28FDSOI_DSE_DV_LOW 1U /* Low drive strength dual volt */ - -/* Defines for sc_pad_28fdsoi_ps_t */ -#define SC_PAD_28FDSOI_PS_KEEPER 0U /* Bus-keeper (only valid for 1.8v) */ -#define SC_PAD_28FDSOI_PS_PU 1U /* Pull-up */ -#define SC_PAD_28FDSOI_PS_PD 2U /* Pull-down */ -#define SC_PAD_28FDSOI_PS_NONE 3U /* No pull (disabled) */ - -/* Defines for sc_pad_28fdsoi_pus_t */ -#define SC_PAD_28FDSOI_PUS_30K_PD 0U /* 30K pull-down */ -#define SC_PAD_28FDSOI_PUS_100K_PU 1U /* 100K pull-up */ -#define SC_PAD_28FDSOI_PUS_3K_PU 2U /* 3K pull-up */ -#define SC_PAD_28FDSOI_PUS_30K_PU 3U /* 30K pull-up */ - -/* Defines for sc_pad_wakeup_t */ -#define SC_PAD_WAKEUP_OFF 0U /* Off */ -#define SC_PAD_WAKEUP_CLEAR 1U /* Clears pending flag */ -#define SC_PAD_WAKEUP_LOW_LVL 4U /* Low level */ -#define SC_PAD_WAKEUP_FALL_EDGE 5U /* Falling edge */ -#define SC_PAD_WAKEUP_RISE_EDGE 6U /* Rising edge */ -#define SC_PAD_WAKEUP_HIGH_LVL 7U /* High-level */ - -#endif /* SC_PAD_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h deleted file mode 100644 index 9008b85c6f6..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/pm/api.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_PM_API_H -#define SC_PM_API_H - -/* Defines for sc_pm_power_mode_t */ -#define SC_PM_PW_MODE_OFF 0U /* Power off */ -#define SC_PM_PW_MODE_STBY 1U /* Power in standby */ -#define SC_PM_PW_MODE_LP 2U /* Power in low-power */ -#define SC_PM_PW_MODE_ON 3U /* Power on */ - -/* Defines for sc_pm_clk_t */ -#define SC_PM_CLK_SLV_BUS 0U /* Slave bus clock */ -#define SC_PM_CLK_MST_BUS 1U /* Master bus clock */ -#define SC_PM_CLK_PER 2U /* Peripheral clock */ -#define SC_PM_CLK_PHY 3U /* Phy clock */ -#define SC_PM_CLK_MISC 4U /* Misc clock */ -#define SC_PM_CLK_MISC0 0U /* Misc 0 clock */ -#define SC_PM_CLK_MISC1 1U /* Misc 1 clock */ -#define SC_PM_CLK_MISC2 2U /* Misc 2 clock */ -#define SC_PM_CLK_MISC3 3U /* Misc 3 clock */ -#define SC_PM_CLK_MISC4 4U /* Misc 4 clock */ -#define SC_PM_CLK_CPU 2U /* CPU clock */ -#define SC_PM_CLK_PLL 4U /* PLL */ -#define SC_PM_CLK_BYPASS 4U /* Bypass clock */ - -/* Defines for sc_pm_clk_mode_t */ -#define SC_PM_CLK_MODE_ROM_INIT 0U /* Clock is initialized by ROM. */ -#define SC_PM_CLK_MODE_OFF 1U /* Clock is disabled */ -#define SC_PM_CLK_MODE_ON 2U /* Clock is enabled. */ -#define SC_PM_CLK_MODE_AUTOGATE_SW 3U /* Clock is in SW autogate mode */ -#define SC_PM_CLK_MODE_AUTOGATE_HW 4U /* Clock is in HW autogate mode */ -#define SC_PM_CLK_MODE_AUTOGATE_SW_HW 5U /* Clock is in SW-HW autogate mode */ - -typedef u8 sc_pm_power_mode_t; -typedef u8 sc_pm_clk_t; -typedef u8 sc_pm_clk_mode_t; -typedef u8 sc_pm_clk_parent_t; -typedef u32 sc_pm_clock_rate_t; - -#endif /* SC_PM_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h deleted file mode 100644 index ed303881e73..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/rm/api.h +++ /dev/null @@ -1,69 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_RM_API_H -#define SC_RM_API_H - -#include <asm/arch/sci/types.h> - -/* Defines for type widths */ -#define SC_RM_PARTITION_W 5U /* Width of sc_rm_pt_t */ -#define SC_RM_MEMREG_W 6U /* Width of sc_rm_mr_t */ -#define SC_RM_DID_W 4U /* Width of sc_rm_did_t */ -#define SC_RM_SID_W 6U /* Width of sc_rm_sid_t */ -#define SC_RM_SPA_W 2U /* Width of sc_rm_spa_t */ -#define SC_RM_PERM_W 3U /* Width of sc_rm_perm_t */ - -/* Defines for ALL parameters */ -#define SC_RM_PT_ALL ((sc_rm_pt_t)UINT8_MAX) /* All partitions */ -#define SC_RM_MR_ALL ((sc_rm_mr_t)UINT8_MAX) /* All memory regions */ - -/* Defines for sc_rm_spa_t */ -#define SC_RM_SPA_PASSTHRU 0U /* Pass through (attribute driven by master) */ -#define SC_RM_SPA_PASSSID 1U /* Pass through and output on SID */ -#define SC_RM_SPA_ASSERT 2U /* Assert (force to be secure/privileged) */ -#define SC_RM_SPA_NEGATE 3U /* Negate (force to be non-secure/user) */ - -/* Defines for sc_rm_perm_t */ -#define SC_RM_PERM_NONE 0U /* No access */ -#define SC_RM_PERM_SEC_R 1U /* Secure RO */ -#define SC_RM_PERM_SECPRIV_RW 2U /* Secure privilege R/W */ -#define SC_RM_PERM_SEC_RW 3U /* Secure R/W */ -#define SC_RM_PERM_NSPRIV_R 4U /* Secure R/W, non-secure privilege RO */ -#define SC_RM_PERM_NS_R 5U /* Secure R/W, non-secure RO */ -#define SC_RM_PERM_NSPRIV_RW 6U /* Secure R/W, non-secure privilege R/W */ -#define SC_RM_PERM_FULL 7U /* Full access */ - -/* Types */ - -/*! - * This type is used to declare a resource partition. - */ -typedef u8 sc_rm_pt_t; - -/*! - * This type is used to declare a memory region. - */ -typedef u8 sc_rm_mr_t; - -/*! - * This type is used to declare a resource domain ID used by the - * isolation HW. - */ -typedef u8 sc_rm_did_t; - -/*! - * This type is used to declare an SMMU StreamID. - */ -typedef u16 sc_rm_sid_t; - -/*! - * This type is a used to declare master transaction attributes. - */ -typedef u8 sc_rm_spa_t; - -typedef u8 sc_rm_perm_t; - -#endif /* SC_RM_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h b/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h deleted file mode 100644 index 3ed05842d99..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/svc/seco/api.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2019 NXP - */ - -#ifndef SC_SECO_API_H -#define SC_SECO_API_H - -/* Includes */ - -#include <asm/arch/sci/types.h> - -/* Defines */ -#define SC_SECO_AUTH_CONTAINER 0U /* Authenticate container */ -#define SC_SECO_VERIFY_IMAGE 1U /* Verify image */ -#define SC_SECO_REL_CONTAINER 2U /* Release container */ -#define SC_SECO_AUTH_SECO_FW 3U /* SECO Firmware */ -#define SC_SECO_AUTH_HDMI_TX_FW 4U /* HDMI TX Firmware */ -#define SC_SECO_AUTH_HDMI_RX_FW 5U /* HDMI RX Firmware */ - -#define SC_SECO_RNG_STAT_UNAVAILABLE 0U /* Unable to initialize the RNG */ -#define SC_SECO_RNG_STAT_INPROGRESS 1U /* Initialization is on-going */ -#define SC_SECO_RNG_STAT_READY 2U /* Initialized */ - -/* Types */ - -/*! - * This type is used to issue SECO authenticate commands. - */ -typedef u8 sc_seco_auth_cmd_t; - -/*! - * This type is used to return the RNG initialization status. - */ -typedef u32 sc_seco_rng_stat_t; - -#endif /* SC_SECO_API_H */ diff --git a/arch/arm/include/asm/arch-imx8/sci/types.h b/arch/arm/include/asm/arch-imx8/sci/types.h deleted file mode 100644 index adfed13e330..00000000000 --- a/arch/arm/include/asm/arch-imx8/sci/types.h +++ /dev/null @@ -1,226 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2018 NXP - */ - -#ifndef SC_TYPES_H -#define SC_TYPES_H - -/* Includes */ -#include <linux/types.h> - -/* Defines */ -/* - * This type is used to declare a handle for an IPC communication - * channel. Its meaning is specific to the IPC implementation. - */ -typedef u64 sc_ipc_t; - -/* Defines for common frequencies */ -#define SC_32KHZ 32768U /* 32KHz */ -#define SC_10MHZ 10000000U /* 10MHz */ -#define SC_20MHZ 20000000U /* 20MHz */ -#define SC_25MHZ 25000000U /* 25MHz */ -#define SC_27MHZ 27000000U /* 27MHz */ -#define SC_40MHZ 40000000U /* 40MHz */ -#define SC_45MHZ 45000000U /* 45MHz */ -#define SC_50MHZ 50000000U /* 50MHz */ -#define SC_60MHZ 60000000U /* 60MHz */ -#define SC_66MHZ 66666666U /* 66MHz */ -#define SC_74MHZ 74250000U /* 74.25MHz */ -#define SC_80MHZ 80000000U /* 80MHz */ -#define SC_83MHZ 83333333U /* 83MHz */ -#define SC_84MHZ 84375000U /* 84.37MHz */ -#define SC_100MHZ 100000000U /* 100MHz */ -#define SC_114MHZ 114000000U /* 114MHz */ -#define SC_125MHZ 125000000U /* 125MHz */ -#define SC_133MHZ 133333333U /* 133MHz */ -#define SC_135MHZ 135000000U /* 135MHz */ -#define SC_150MHZ 150000000U /* 150MHz */ -#define SC_160MHZ 160000000U /* 160MHz */ -#define SC_166MHZ 166666666U /* 166MHz */ -#define SC_175MHZ 175000000U /* 175MHz */ -#define SC_180MHZ 180000000U /* 180MHz */ -#define SC_200MHZ 200000000U /* 200MHz */ -#define SC_250MHZ 250000000U /* 250MHz */ -#define SC_266MHZ 266666666U /* 266MHz */ -#define SC_300MHZ 300000000U /* 300MHz */ -#define SC_312MHZ 312500000U /* 312.5MHZ */ -#define SC_320MHZ 320000000U /* 320MHz */ -#define SC_325MHZ 325000000U /* 325MHz */ -#define SC_333MHZ 333333333U /* 333MHz */ -#define SC_350MHZ 350000000U /* 350MHz */ -#define SC_372MHZ 372000000U /* 372MHz */ -#define SC_375MHZ 375000000U /* 375MHz */ -#define SC_400MHZ 400000000U /* 400MHz */ -#define SC_465MHZ 465000000U /* 465MHz */ -#define SC_500MHZ 500000000U /* 500MHz */ -#define SC_594MHZ 594000000U /* 594MHz */ -#define SC_625MHZ 625000000U /* 625MHz */ -#define SC_640MHZ 640000000U /* 640MHz */ -#define SC_650MHZ 650000000U /* 650MHz */ -#define SC_667MHZ 666666667U /* 667MHz */ -#define SC_675MHZ 675000000U /* 675MHz */ -#define SC_700MHZ 700000000U /* 700MHz */ -#define SC_720MHZ 720000000U /* 720MHz */ -#define SC_750MHZ 750000000U /* 750MHz */ -#define SC_800MHZ 800000000U /* 800MHz */ -#define SC_850MHZ 850000000U /* 850MHz */ -#define SC_900MHZ 900000000U /* 900MHz */ -#define SC_1000MHZ 1000000000U /* 1GHz */ -#define SC_1060MHZ 1060000000U /* 1.06GHz */ -#define SC_1188MHZ 1188000000U /* 1.188GHz */ -#define SC_1260MHZ 1260000000U /* 1.26GHz */ -#define SC_1280MHZ 1280000000U /* 1.28GHz */ -#define SC_1300MHZ 1300000000U /* 1.3GHz */ -#define SC_1400MHZ 1400000000U /* 1.4GHz */ -#define SC_1500MHZ 1500000000U /* 1.5GHz */ -#define SC_1600MHZ 1600000000U /* 1.6GHz */ -#define SC_1800MHZ 1800000000U /* 1.8GHz */ -#define SC_1860MHZ 1860000000U /* 1.86GHz */ -#define SC_2000MHZ 2000000000U /* 2.0GHz */ -#define SC_2112MHZ 2112000000U /* 2.12GHz */ - -/* Defines for 24M related frequencies */ -#define SC_8MHZ 8000000U /* 8MHz */ -#define SC_12MHZ 12000000U /* 12MHz */ -#define SC_19MHZ 19800000U /* 19.8MHz */ -#define SC_24MHZ 24000000U /* 24MHz */ -#define SC_48MHZ 48000000U /* 48MHz */ -#define SC_120MHZ 120000000U /* 120MHz */ -#define SC_132MHZ 132000000U /* 132MHz */ -#define SC_144MHZ 144000000U /* 144MHz */ -#define SC_192MHZ 192000000U /* 192MHz */ -#define SC_211MHZ 211200000U /* 211.2MHz */ -#define SC_228MHZ 228000000U /* 233MHz */ -#define SC_240MHZ 240000000U /* 240MHz */ -#define SC_264MHZ 264000000U /* 264MHz */ -#define SC_352MHZ 352000000U /* 352MHz */ -#define SC_360MHZ 360000000U /* 360MHz */ -#define SC_384MHZ 384000000U /* 384MHz */ -#define SC_396MHZ 396000000U /* 396MHz */ -#define SC_432MHZ 432000000U /* 432MHz */ -#define SC_456MHZ 456000000U /* 466MHz */ -#define SC_480MHZ 480000000U /* 480MHz */ -#define SC_600MHZ 600000000U /* 600MHz */ -#define SC_744MHZ 744000000U /* 744MHz */ -#define SC_792MHZ 792000000U /* 792MHz */ -#define SC_864MHZ 864000000U /* 864MHz */ -#define SC_912MHZ 912000000U /* 912MHz */ -#define SC_960MHZ 960000000U /* 960MHz */ -#define SC_1056MHZ 1056000000U /* 1056MHz */ -#define SC_1104MHZ 1104000000U /* 1104MHz */ -#define SC_1200MHZ 1200000000U /* 1.2GHz */ -#define SC_1464MHZ 1464000000U /* 1.464GHz */ -#define SC_2400MHZ 2400000000U /* 2.4GHz */ - -/* Defines for A/V related frequencies */ -#define SC_62MHZ 62937500U /* 62.9375MHz */ -#define SC_755MHZ 755250000U /* 755.25MHz */ - -/* Defines for type widths */ -#define SC_FADDR_W 36U /* Width of sc_faddr_t */ -#define SC_BOOL_W 1U /* Width of sc_bool_t */ -#define SC_ERR_W 4U /* Width of sc_err_t */ -#define SC_RSRC_W 10U /* Width of sc_rsrc_t */ -#define SC_CTRL_W 6U /* Width of sc_ctrl_t */ - -/* Defines for sc_bool_t */ -#define SC_FALSE ((sc_bool_t)0U) -#define SC_TRUE ((sc_bool_t)1U) - -/* Defines for sc_err_t */ -#define SC_ERR_NONE 0U /* Success */ -#define SC_ERR_VERSION 1U /* Incompatible API version */ -#define SC_ERR_CONFIG 2U /* Configuration error */ -#define SC_ERR_PARM 3U /* Bad parameter */ -#define SC_ERR_NOACCESS 4U /* Permission error (no access) */ -#define SC_ERR_LOCKED 5U /* Permission error (locked) */ -#define SC_ERR_UNAVAILABLE 6U /* Unavailable (out of resources) */ -#define SC_ERR_NOTFOUND 7U /* Not found */ -#define SC_ERR_NOPOWER 8U /* No power */ -#define SC_ERR_IPC 9U /* Generic IPC error */ -#define SC_ERR_BUSY 10U /* Resource is currently busy/active */ -#define SC_ERR_FAIL 11U /* General I/O failure */ -#define SC_ERR_LAST 12U - -/* Defines for sc_ctrl_t. */ -#define SC_C_TEMP 0U -#define SC_C_TEMP_HI 1U -#define SC_C_TEMP_LOW 2U -#define SC_C_PXL_LINK_MST1_ADDR 3U -#define SC_C_PXL_LINK_MST2_ADDR 4U -#define SC_C_PXL_LINK_MST_ENB 5U -#define SC_C_PXL_LINK_MST1_ENB 6U -#define SC_C_PXL_LINK_MST2_ENB 7U -#define SC_C_PXL_LINK_SLV1_ADDR 8U -#define SC_C_PXL_LINK_SLV2_ADDR 9U -#define SC_C_PXL_LINK_MST_VLD 10U -#define SC_C_PXL_LINK_MST1_VLD 11U -#define SC_C_PXL_LINK_MST2_VLD 12U -#define SC_C_SINGLE_MODE 13U -#define SC_C_ID 14U -#define SC_C_PXL_CLK_POLARITY 15U -#define SC_C_LINESTATE 16U -#define SC_C_PCIE_G_RST 17U -#define SC_C_PCIE_BUTTON_RST 18U -#define SC_C_PCIE_PERST 19U -#define SC_C_PHY_RESET 20U -#define SC_C_PXL_LINK_RATE_CORRECTION 21U -#define SC_C_PANIC 22U -#define SC_C_PRIORITY_GROUP 23U -#define SC_C_TXCLK 24U -#define SC_C_CLKDIV 25U -#define SC_C_DISABLE_50 26U -#define SC_C_DISABLE_125 27U -#define SC_C_SEL_125 28U -#define SC_C_MODE 29U -#define SC_C_SYNC_CTRL0 30U -#define SC_C_KACHUNK_CNT 31U -#define SC_C_KACHUNK_SEL 32U -#define SC_C_SYNC_CTRL1 33U -#define SC_C_DPI_RESET 34U -#define SC_C_MIPI_RESET 35U -#define SC_C_DUAL_MODE 36U -#define SC_C_VOLTAGE 37U -#define SC_C_PXL_LINK_SEL 38U -#define SC_C_OFS_SEL 39U -#define SC_C_OFS_AUDIO 40U -#define SC_C_OFS_PERIPH 41U -#define SC_C_OFS_IRQ 42U -#define SC_C_RST0 43U -#define SC_C_RST1 44U -#define SC_C_SEL0 45U -#define SC_C_LAST 46U - -#define SC_P_ALL ((sc_pad_t)UINT16_MAX) /* All pads */ - -/* Types */ - -/* This type is used to store a boolean */ -typedef u8 sc_bool_t; - -/* This type is used to store a system (full-size) address. */ -typedef u64 sc_faddr_t; - -/* This type is used to indicate error response for most functions. */ -typedef u8 sc_err_t; - -/* - * This type is used to indicate a resource. Resources include peripherals - * and bus masters (but not memory regions). Note items from list should - * never be changed or removed (only added to at the end of the list). - */ -typedef u16 sc_rsrc_t; - -/* This type is used to indicate a control. */ -typedef u8 sc_ctrl_t; - -/* - * This type is used to indicate a pad. Valid values are SoC specific. - * - * Refer to the SoC [Pad List](@ref PADS) for valid pad values. - */ -typedef u16 sc_pad_t; - -#endif /* SC_TYPES_H */ diff --git a/arch/arm/include/asm/arch-imx8/sys_proto.h b/arch/arm/include/asm/arch-imx8/sys_proto.h index d38f606e07e..e7625c42985 100644 --- a/arch/arm/include/asm/arch-imx8/sys_proto.h +++ b/arch/arm/include/asm/arch-imx8/sys_proto.h @@ -3,7 +3,7 @@ * Copyright 2018 NXP */ -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #include <asm/mach-imx/sys_proto.h> #include <asm/arch/power-domain.h> #include <dm/platdata.h> diff --git a/arch/arm/include/asm/arch-imx8m/ddr.h b/arch/arm/include/asm/arch-imx8m/ddr.h index 2f76e7d69b9..c14855d177e 100644 --- a/arch/arm/include/asm/arch-imx8m/ddr.h +++ b/arch/arm/include/asm/arch-imx8m/ddr.h @@ -709,7 +709,7 @@ int ddr_init(struct dram_timing_info *timing_info); int ddr_cfg_phy(struct dram_timing_info *timing_info); void load_lpddr4_phy_pie(void); void ddrphy_trained_csr_save(struct dram_cfg_param *param, unsigned int num); -void dram_config_save(struct dram_timing_info *info, unsigned long base); +void *dram_config_save(struct dram_timing_info *info, unsigned long base); void board_dram_ecc_scrub(void); void ddrc_inline_ecc_scrub(unsigned int start_address, unsigned int range_address); diff --git a/arch/arm/include/asm/arch-imx9/clock.h b/arch/arm/include/asm/arch-imx9/clock.h index 336d8613181..1169ffd74d3 100644 --- a/arch/arm/include/asm/arch-imx9/clock.h +++ b/arch/arm/include/asm/arch-imx9/clock.h @@ -205,6 +205,12 @@ struct clk_root_map { u32 mux_type; }; +struct imx_clk_setting { + u32 clk_root; + enum ccm_clk_src src; + u32 div; +}; + int clock_init(void); u32 get_clk_src_rate(enum ccm_clk_src source); u32 get_lpuart_clk(void); diff --git a/arch/arm/include/asm/arch-imx9/ddr.h b/arch/arm/include/asm/arch-imx9/ddr.h index 62e6f7dda53..2b22f3a5bea 100644 --- a/arch/arm/include/asm/arch-imx9/ddr.h +++ b/arch/arm/include/asm/arch-imx9/ddr.h @@ -13,9 +13,21 @@ #define DDR_PHY_BASE 0x4E100000 #define DDRMIX_BLK_CTRL_BASE 0x4E010000 +#define REG_DDR_SDRAM_MD_CNTL (DDR_CTL_BASE + 0x120) +#define REG_DDR_CS0_BNDS (DDR_CTL_BASE + 0x0) +#define REG_DDR_CS1_BNDS (DDR_CTL_BASE + 0x8) #define REG_DDRDSR_2 (DDR_CTL_BASE + 0xB24) +#define REG_DDR_TIMING_CFG_0 (DDR_CTL_BASE + 0x104) #define REG_DDR_SDRAM_CFG (DDR_CTL_BASE + 0x110) +#define REG_DDR_TIMING_CFG_4 (DDR_CTL_BASE + 0x160) #define REG_DDR_DEBUG_19 (DDR_CTL_BASE + 0xF48) +#define REG_DDR_SDRAM_CFG_3 (DDR_CTL_BASE + 0x260) +#define REG_DDR_SDRAM_CFG_4 (DDR_CTL_BASE + 0x264) +#define REG_DDR_SDRAM_MD_CNTL_2 (DDR_CTL_BASE + 0x270) +#define REG_DDR_SDRAM_MPR4 (DDR_CTL_BASE + 0x28C) +#define REG_DDR_SDRAM_MPR5 (DDR_CTL_BASE + 0x290) + +#define REG_DDR_ERR_EN (DDR_CTL_BASE + 0x1000) #define SRC_BASE_ADDR (0x44460000) #define SRC_DPHY_BASE_ADDR (SRC_BASE_ADDR + 0x1400) @@ -50,6 +62,12 @@ struct dram_cfg_param { unsigned int val; }; +struct dram_fsp_cfg { + struct dram_cfg_param ddrc_cfg[20]; + struct dram_cfg_param mr_cfg[10]; + unsigned int bypass; +}; + struct dram_fsp_msg { unsigned int drate; enum fw_type fw_type; @@ -61,6 +79,9 @@ struct dram_timing_info { /* umctl2 config */ struct dram_cfg_param *ddrc_cfg; unsigned int ddrc_cfg_num; + /* fsp config */ + struct dram_fsp_cfg *fsp_cfg; + unsigned int fsp_cfg_num; /* ddrphy config */ struct dram_cfg_param *ddrphy_cfg; unsigned int ddrphy_cfg_num; @@ -84,7 +105,7 @@ int ddr_init(struct dram_timing_info *timing_info); int ddr_cfg_phy(struct dram_timing_info *timing_info); void load_lpddr4_phy_pie(void); void ddrphy_trained_csr_save(struct dram_cfg_param *param, unsigned int num); -void dram_config_save(struct dram_timing_info *info, unsigned long base); +void *dram_config_save(struct dram_timing_info *info, unsigned long base); void board_dram_ecc_scrub(void); void ddrc_inline_ecc_scrub(unsigned int start_address, unsigned int range_address); diff --git a/arch/arm/include/asm/arch-imx9/imx-regs.h b/arch/arm/include/asm/arch-imx9/imx-regs.h index 065fd1f96de..76d241eab09 100644 --- a/arch/arm/include/asm/arch-imx9/imx-regs.h +++ b/arch/arm/include/asm/arch-imx9/imx-regs.h @@ -48,6 +48,9 @@ #define BCTRL_GPR_ENET_QOS_INTF_SEL_RGMII (0x1 << 1) #define BCTRL_GPR_ENET_QOS_CLK_GEN_EN (0x1 << 0) +#define MARKETING_GRADING_MASK GENMASK(5, 4) +#define SPEED_GRADING_MASK GENMASK(11, 6) + #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> #include <stdbool.h> diff --git a/arch/arm/include/asm/mach-imx/sys_proto.h b/arch/arm/include/asm/mach-imx/sys_proto.h index 2eacddb51f5..85d9ca60b14 100644 --- a/arch/arm/include/asm/mach-imx/sys_proto.h +++ b/arch/arm/include/asm/mach-imx/sys_proto.h @@ -82,7 +82,17 @@ struct bd_info; #define is_imx8qxp() (is_cpu_type(MXC_CPU_IMX8QXP)) -#define is_imx93() (is_cpu_type(MXC_CPU_IMX93)) +#define is_imx93() (is_cpu_type(MXC_CPU_IMX93) || is_cpu_type(MXC_CPU_IMX9331) || \ + is_cpu_type(MXC_CPU_IMX9332) || is_cpu_type(MXC_CPU_IMX9351) || \ + is_cpu_type(MXC_CPU_IMX9322) || is_cpu_type(MXC_CPU_IMX9321) || \ + is_cpu_type(MXC_CPU_IMX9312) || is_cpu_type(MXC_CPU_IMX9311)) +#define is_imx9351() (is_cpu_type(MXC_CPU_IMX9351)) +#define is_imx9332() (is_cpu_type(MXC_CPU_IMX9332)) +#define is_imx9331() (is_cpu_type(MXC_CPU_IMX9331)) +#define is_imx9322() (is_cpu_type(MXC_CPU_IMX9322)) +#define is_imx9321() (is_cpu_type(MXC_CPU_IMX9321)) +#define is_imx9312() (is_cpu_type(MXC_CPU_IMX9312)) +#define is_imx9311() (is_cpu_type(MXC_CPU_IMX9311)) #define is_imxrt1020() (is_cpu_type(MXC_CPU_IMXRT1020)) #define is_imxrt1050() (is_cpu_type(MXC_CPU_IMXRT1050)) diff --git a/arch/arm/mach-imx/cmd_dek.c b/arch/arm/mach-imx/cmd_dek.c index b65bf874b83..69ed57537b3 100644 --- a/arch/arm/mach-imx/cmd_dek.c +++ b/arch/arm/mach-imx/cmd_dek.c @@ -17,7 +17,7 @@ #include <mapmem.h> #include <tee.h> #ifdef CONFIG_IMX_SECO_DEK_ENCAP -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #include <asm/mach-imx/image.h> #endif #include <cpu_func.h> diff --git a/arch/arm/mach-imx/imx8/ahab.c b/arch/arm/mach-imx/imx8/ahab.c index 5a4d39cdaad..9addb824b6d 100644 --- a/arch/arm/mach-imx/imx8/ahab.c +++ b/arch/arm/mach-imx/imx8/ahab.c @@ -9,7 +9,7 @@ #include <log.h> #include <asm/global_data.h> #include <asm/io.h> -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #include <asm/mach-imx/sys_proto.h> #include <asm/arch-imx/cpu.h> #include <asm/arch/sys_proto.h> diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 99772f68c32..7b292c07ef9 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -19,7 +19,7 @@ #include <errno.h> #include <spl.h> #include <thermal.h> -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #include <asm/arch/sys_proto.h> #include <asm/arch-imx/cpu.h> #include <asm/armv8/cpu.h> diff --git a/arch/arm/mach-imx/imx8/fdt.c b/arch/arm/mach-imx/imx8/fdt.c index a132ce2e6a3..02b3ee5c111 100644 --- a/arch/arm/mach-imx/imx8/fdt.c +++ b/arch/arm/mach-imx/imx8/fdt.c @@ -5,7 +5,7 @@ #include <common.h> #include <log.h> -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #include <asm/arch/sys_proto.h> #include <asm/global_data.h> #include <dm/ofnode.h> diff --git a/arch/arm/mach-imx/imx8/iomux.c b/arch/arm/mach-imx/imx8/iomux.c index 9c3cfbf0068..e4f7651bd1d 100644 --- a/arch/arm/mach-imx/imx8/iomux.c +++ b/arch/arm/mach-imx/imx8/iomux.c @@ -8,7 +8,7 @@ #include <asm/global_data.h> #include <asm/io.h> #include <asm/arch/iomux.h> -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/arm/mach-imx/imx8/misc.c b/arch/arm/mach-imx/imx8/misc.c index de19955e2f7..0ce3036818b 100644 --- a/arch/arm/mach-imx/imx8/misc.c +++ b/arch/arm/mach-imx/imx8/misc.c @@ -1,7 +1,7 @@ // SPDX-License-Identifier: GPL-2.0+ #include <common.h> #include <log.h> -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #include <asm/mach-imx/sys_proto.h> #include <imx_sip.h> #include <linux/arm-smccc.h> diff --git a/arch/arm/mach-imx/imx8/snvs_security_sc.c b/arch/arm/mach-imx/imx8/snvs_security_sc.c index 507b5b42314..d7b20a1fcbf 100644 --- a/arch/arm/mach-imx/imx8/snvs_security_sc.c +++ b/arch/arm/mach-imx/imx8/snvs_security_sc.c @@ -15,7 +15,7 @@ #include <log.h> #include <stddef.h> #include <common.h> -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #include <asm/arch-imx8/imx8-pins.h> #include <asm/arch-imx8/snvs_security_sc.h> #include <asm/global_data.h> diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index 5a4f8358c9f..5ffdcabbb51 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -671,6 +671,7 @@ int spl_mmc_emmc_boot_partition(struct mmc *mmc) /* Log entries with 1 parameter, skip 1 */ case 0x80: /* Start to perform the device initialization */ case 0x81: /* The boot device initialization completes */ + case 0x82: /* Starts to execute boot device driver pre-config */ case 0x8f: /* The boot device initialization fails */ case 0x90: /* Start to read data from boot device */ case 0x91: /* Reading data from boot device completes */ @@ -1429,79 +1430,6 @@ int arch_misc_init(void) } #endif -void imx_tmu_arch_init(void *reg_base) -{ - if (is_imx8mm() || is_imx8mn()) { - /* Load TCALIV and TASR from fuses */ - struct ocotp_regs *ocotp = - (struct ocotp_regs *)OCOTP_BASE_ADDR; - struct fuse_bank *bank = &ocotp->bank[3]; - struct fuse_bank3_regs *fuse = - (struct fuse_bank3_regs *)bank->fuse_regs; - - u32 tca_rt, tca_hr, tca_en; - u32 buf_vref, buf_slope; - - tca_rt = fuse->ana0 & 0xFF; - tca_hr = (fuse->ana0 & 0xFF00) >> 8; - tca_en = (fuse->ana0 & 0x2000000) >> 25; - - buf_vref = (fuse->ana0 & 0x1F00000) >> 20; - buf_slope = (fuse->ana0 & 0xF0000) >> 16; - - writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28); - writel((tca_en << 31) | (tca_hr << 16) | tca_rt, - (ulong)reg_base + 0x30); - } -#ifdef CONFIG_IMX8MP - /* Load TCALIV0/1/m40 and TRIM from fuses */ - struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; - struct fuse_bank *bank = &ocotp->bank[38]; - struct fuse_bank38_regs *fuse = - (struct fuse_bank38_regs *)bank->fuse_regs; - struct fuse_bank *bank2 = &ocotp->bank[39]; - struct fuse_bank39_regs *fuse2 = - (struct fuse_bank39_regs *)bank2->fuse_regs; - u32 buf_vref, buf_slope, bjt_cur, vlsb, bgr; - u32 reg; - u32 tca40[2], tca25[2], tca105[2]; - - /* For blank sample */ - if (!fuse->ana_trim2 && !fuse->ana_trim3 && - !fuse->ana_trim4 && !fuse2->ana_trim5) { - /* Use a default 25C binary codes */ - tca25[0] = 1596; - tca25[1] = 1596; - writel(tca25[0], (ulong)reg_base + 0x30); - writel(tca25[1], (ulong)reg_base + 0x34); - return; - } - - buf_vref = (fuse->ana_trim2 & 0xc0) >> 6; - buf_slope = (fuse->ana_trim2 & 0xF00) >> 8; - bjt_cur = (fuse->ana_trim2 & 0xF000) >> 12; - bgr = (fuse->ana_trim2 & 0xF0000) >> 16; - vlsb = (fuse->ana_trim2 & 0xF00000) >> 20; - writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28); - - reg = (bgr << 28) | (bjt_cur << 20) | (vlsb << 12) | (1 << 7); - writel(reg, (ulong)reg_base + 0x3c); - - tca40[0] = (fuse->ana_trim3 & 0xFFF0000) >> 16; - tca25[0] = (fuse->ana_trim3 & 0xF0000000) >> 28; - tca25[0] |= ((fuse->ana_trim4 & 0xFF) << 4); - tca105[0] = (fuse->ana_trim4 & 0xFFF00) >> 8; - tca40[1] = (fuse->ana_trim4 & 0xFFF00000) >> 20; - tca25[1] = fuse2->ana_trim5 & 0xFFF; - tca105[1] = (fuse2->ana_trim5 & 0xFFF000) >> 12; - - /* use 25c for 1p calibration */ - writel(tca25[0] | (tca105[0] << 16), (ulong)reg_base + 0x30); - writel(tca25[1] | (tca105[1] << 16), (ulong)reg_base + 0x34); - writel(tca40[0] | (tca40[1] << 16), (ulong)reg_base + 0x38); -#endif -} - #if defined(CONFIG_SPL_BUILD) #if defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN) bool serror_need_skip = true; diff --git a/arch/arm/mach-imx/imx8ulp/Kconfig b/arch/arm/mach-imx/imx8ulp/Kconfig index c1c1aa08c52..49ea25250a3 100644 --- a/arch/arm/mach-imx/imx8ulp/Kconfig +++ b/arch/arm/mach-imx/imx8ulp/Kconfig @@ -1,5 +1,10 @@ if ARCH_IMX8ULP +config AHAB_BOOT + bool "Support i.MX8ULP AHAB features" + help + This option enables the support for AHAB secure boot. + config IMX8ULP bool diff --git a/arch/arm/mach-imx/imx8ulp/Makefile b/arch/arm/mach-imx/imx8ulp/Makefile index 2c9938fcdf0..f7692cf3a78 100644 --- a/arch/arm/mach-imx/imx8ulp/Makefile +++ b/arch/arm/mach-imx/imx8ulp/Makefile @@ -5,6 +5,7 @@ obj-y += lowlevel_init.o obj-y += soc.o clock.o iomux.o pcc.o cgc.o rdc.o +obj-$(CONFIG_AHAB_BOOT) += ahab.o ifeq ($(CONFIG_SPL_BUILD),y) obj-y += upower/ diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig index c06102bae07..c51f80f311a 100644 --- a/arch/arm/mach-imx/imx9/Kconfig +++ b/arch/arm/mach-imx/imx9/Kconfig @@ -5,6 +5,11 @@ config AHAB_BOOT help This option enables the support for AHAB secure boot. +config IMX9_LOW_DRIVE_MODE + bool "Configure to i.MX9 low drive mode" + help + This option enables the settings for iMX9 low drive mode. + config IMX9 bool select HAS_CAAM diff --git a/arch/arm/mach-imx/imx9/clock.c b/arch/arm/mach-imx/imx9/clock.c index 04f3116fd1c..a7ecccaf879 100644 --- a/arch/arm/mach-imx/imx9/clock.c +++ b/arch/arm/mach-imx/imx9/clock.c @@ -26,6 +26,7 @@ static struct anatop_reg *ana_regs = (struct anatop_reg *)ANATOP_BASE_ADDR; static struct imx_intpll_rate_table imx9_intpll_tbl[] = { INT_PLL_RATE(1800000000U, 1, 150, 2), /* 1.8Ghz */ INT_PLL_RATE(1700000000U, 1, 141, 2), /* 1.7Ghz */ + INT_PLL_RATE(1500000000U, 1, 125, 2), /* 1.5Ghz */ INT_PLL_RATE(1400000000U, 1, 175, 3), /* 1.4Ghz */ INT_PLL_RATE(1000000000U, 1, 166, 4), /* 1000Mhz */ INT_PLL_RATE(900000000U, 1, 150, 4), /* 900Mhz */ @@ -35,8 +36,11 @@ static struct imx_fracpll_rate_table imx9_fracpll_tbl[] = { FRAC_PLL_RATE(1000000000U, 1, 166, 4, 2, 3), /* 1000Mhz */ FRAC_PLL_RATE(933000000U, 1, 155, 4, 1, 2), /* 933Mhz */ FRAC_PLL_RATE(700000000U, 1, 145, 5, 5, 6), /* 700Mhz */ + FRAC_PLL_RATE(484000000U, 1, 121, 6, 0, 1), + FRAC_PLL_RATE(445333333U, 1, 167, 9, 0, 1), FRAC_PLL_RATE(466000000U, 1, 155, 8, 1, 3), /* 466Mhz */ FRAC_PLL_RATE(400000000U, 1, 200, 12, 0, 1), /* 400Mhz */ + FRAC_PLL_RATE(300000000U, 1, 150, 12, 0, 1), }; /* return in khz */ @@ -202,6 +206,9 @@ int configure_intpll(enum ccm_clk_src pll, u32 freq) return -EPERM; } + /* Clear PLL HW CTRL SEL */ + setbits_le32(®->ctrl.reg_clr, PLL_CTRL_HW_CTRL_SEL); + /* Bypass the PLL to ref */ writel(PLL_CTRL_CLKMUX_BYPASS, ®->ctrl.reg_set); @@ -570,7 +577,7 @@ u32 imx_get_i2cclk(u32 i2c_num) if (i2c_num > 7) return -EINVAL; - return ccm_clk_root_get_rate(LPUART1_CLK_ROOT + i2c_num); + return ccm_clk_root_get_rate(LPI2C1_CLK_ROOT + i2c_num); } u32 get_lpuart_clk(void) @@ -594,21 +601,27 @@ void init_uart_clk(u32 index) void init_clk_usdhc(u32 index) { - /* 400 Mhz */ + u32 div; + + if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) + div = 3; /* 266.67 Mhz */ + else + div = 2; /* 400 Mhz */ + switch (index) { case 0: ccm_lpcg_on(CCGR_USDHC1, 0); - ccm_clk_root_cfg(USDHC1_CLK_ROOT, SYS_PLL_PFD1, 2); + ccm_clk_root_cfg(USDHC1_CLK_ROOT, SYS_PLL_PFD1, div); ccm_lpcg_on(CCGR_USDHC1, 1); break; case 1: ccm_lpcg_on(CCGR_USDHC2, 0); - ccm_clk_root_cfg(USDHC2_CLK_ROOT, SYS_PLL_PFD1, 2); + ccm_clk_root_cfg(USDHC2_CLK_ROOT, SYS_PLL_PFD1, div); ccm_lpcg_on(CCGR_USDHC2, 1); break; case 2: ccm_lpcg_on(CCGR_USDHC3, 0); - ccm_clk_root_cfg(USDHC3_CLK_ROOT, SYS_PLL_PFD1, 2); + ccm_clk_root_cfg(USDHC3_CLK_ROOT, SYS_PLL_PFD1, div); ccm_lpcg_on(CCGR_USDHC3, 1); break; default: @@ -635,6 +648,9 @@ void dram_pll_init(ulong pll_val) void dram_enable_bypass(ulong clk_val) { switch (clk_val) { + case MHZ(625): + ccm_clk_root_cfg(DRAM_ALT_CLK_ROOT, SYS_PLL_PFD2, 1); + break; case MHZ(400): ccm_clk_root_cfg(DRAM_ALT_CLK_ROOT, SYS_PLL_PFD1, 2); break; @@ -670,42 +686,95 @@ void set_arm_clk(ulong freq) { /* Increase ARM clock to 1.7Ghz */ ccm_shared_gpr_set(SHARED_GPR_A55_CLK, SHARED_GPR_A55_CLK_SEL_CCM); - configure_intpll(ARM_PLL_CLK, 1700000000); + configure_intpll(ARM_PLL_CLK, freq); ccm_shared_gpr_set(SHARED_GPR_A55_CLK, SHARED_GPR_A55_CLK_SEL_PLL); } +void set_arm_core_max_clk(void) +{ + /* Increase ARM clock to max rate according to speed grade */ + u32 speed = get_cpu_speed_grade_hz(); + + set_arm_clk(speed); +} + #endif -int clock_init(void) -{ - int i; +#if IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE) +struct imx_clk_setting imx_clk_settings[] = { + /* Set A55 clk to 500M */ + {ARM_A55_CLK_ROOT, SYS_PLL_PFD0, 2}, + /* Set A55 periphal to 200M */ + {ARM_A55_PERIPH_CLK_ROOT, SYS_PLL_PFD1, 4}, + /* Set A55 mtr bus to 133M */ + {ARM_A55_MTR_BUS_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, + /* Sentinel to 133M */ + {SENTINEL_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, + /* Bus_wakeup to 133M */ + {BUS_WAKEUP_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, + /* Bus_AON to 133M */ + {BUS_AON_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, + /* M33 to 133M */ + {M33_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, + /* WAKEUP_AXI to 200M */ + {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD1, 4}, + /* SWO TRACE to 133M */ + {SWO_TRACE_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, + /* M33 systetick to 24M */ + {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1}, + /* NIC to 250M */ + {NIC_CLK_ROOT, SYS_PLL_PFD0, 4}, + /* NIC_APB to 133M */ + {NIC_APB_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3} +}; +#else +struct imx_clk_setting imx_clk_settings[] = { + /* + * Set A55 clk to 500M. This clock root is normally used as intermediate + * clock source for A55 core/DSU when doing ARM PLL reconfig. set it to + * 500MHz(LD mode frequency) should be ok. + */ + {ARM_A55_CLK_ROOT, SYS_PLL_PFD0, 2}, /* Set A55 periphal to 333M */ - ccm_clk_root_cfg(ARM_A55_PERIPH_CLK_ROOT, SYS_PLL_PFD0, 3); + {ARM_A55_PERIPH_CLK_ROOT, SYS_PLL_PFD0, 3}, /* Set A55 mtr bus to 133M */ - ccm_clk_root_cfg(ARM_A55_MTR_BUS_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3); - + {ARM_A55_MTR_BUS_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, /* Sentinel to 200M */ - ccm_clk_root_cfg(SENTINEL_CLK_ROOT, SYS_PLL_PFD1_DIV2, 2); + {SENTINEL_CLK_ROOT, SYS_PLL_PFD1_DIV2, 2}, /* Bus_wakeup to 133M */ - ccm_clk_root_cfg(BUS_WAKEUP_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3); + {BUS_WAKEUP_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, /* Bus_AON to 133M */ - ccm_clk_root_cfg(BUS_AON_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3); + {BUS_AON_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, /* M33 to 200M */ - ccm_clk_root_cfg(M33_CLK_ROOT, SYS_PLL_PFD1_DIV2, 2); + {M33_CLK_ROOT, SYS_PLL_PFD1_DIV2, 2}, /* * WAKEUP_AXI to 312.5M, because of FEC only can support to 320M for * generating MII clock at 2.5M */ - ccm_clk_root_cfg(WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD2, 2); + {WAKEUP_AXI_CLK_ROOT, SYS_PLL_PFD2, 2}, /* SWO TRACE to 133M */ - ccm_clk_root_cfg(SWO_TRACE_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3); - /* M33 systetick to 133M */ - ccm_clk_root_cfg(M33_SYSTICK_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3); + {SWO_TRACE_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3}, + /* M33 systetick to 24M */ + {M33_SYSTICK_CLK_ROOT, OSC_24M_CLK, 1}, /* NIC to 400M */ - ccm_clk_root_cfg(NIC_CLK_ROOT, SYS_PLL_PFD1, 2); + {NIC_CLK_ROOT, SYS_PLL_PFD1, 2}, /* NIC_APB to 133M */ - ccm_clk_root_cfg(NIC_APB_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3); + {NIC_APB_CLK_ROOT, SYS_PLL_PFD1_DIV2, 3} +}; +#endif + +int clock_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(imx_clk_settings); i++) { + ccm_clk_root_cfg(imx_clk_settings[i].clk_root, + imx_clk_settings[i].src, imx_clk_settings[i].div); + } + + if (IS_ENABLED(CONFIG_IMX9_LOW_DRIVE_MODE)) + set_arm_clk(MHZ(900)); /* allow for non-secure access */ for (i = 0; i < OSCPLL_END; i++) diff --git a/arch/arm/mach-imx/imx9/imx_bootaux.c b/arch/arm/mach-imx/imx9/imx_bootaux.c index 3b6662aeb81..256e6fa1c54 100644 --- a/arch/arm/mach-imx/imx9/imx_bootaux.c +++ b/arch/arm/mach-imx/imx9/imx_bootaux.c @@ -34,17 +34,13 @@ int arch_auxiliary_core_down(u32 core_id) int arch_auxiliary_core_up(u32 core_id, ulong addr) { struct arm_smccc_res res; - u32 stack, pc; if (!addr) return -EINVAL; - stack = *(u32 *)addr; - pc = *(u32 *)(addr + 4); + printf("## Starting auxiliary core addr = 0x%08lX...\n", addr); - printf("## Starting auxiliary core stack = 0x%08X, pc = 0x%08X...\n", stack, pc); - - arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0, + arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, addr, 0, 0, 0, 0, 0, &res); return 0; @@ -129,5 +125,5 @@ U_BOOT_CMD( "Start auxiliary core", "<address> [<core>]\n" " - start auxiliary core [<core>] (default 0),\n" - " at address <address>\n" + " at address <address> of auxiliary core view\n" ); diff --git a/arch/arm/mach-imx/imx9/soc.c b/arch/arm/mach-imx/imx9/soc.c index 252663a9eec..64e8ac610e5 100644 --- a/arch/arm/mach-imx/imx9/soc.c +++ b/arch/arm/mach-imx/imx9/soc.c @@ -19,17 +19,24 @@ #include <asm/mach-imx/boot_mode.h> #include <asm/mach-imx/syscounter.h> #include <asm/armv8/mmu.h> +#include <dm/device.h> +#include <dm/device_compat.h> #include <dm/uclass.h> #include <env.h> #include <env_internal.h> #include <errno.h> #include <fdt_support.h> +#include <imx_thermal.h> #include <linux/bitops.h> +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <thermal.h> #include <asm/setup.h> #include <asm/bootm.h> #include <asm/arch-imx/cpu.h> #include <asm/mach-imx/s400_api.h> -#include <linux/delay.h> +#include <fuse.h> +#include <asm/arch/ddr.h> DECLARE_GLOBAL_DATA_PTR; @@ -38,19 +45,17 @@ struct rom_api *g_rom_api = (struct rom_api *)0x1980; #ifdef CONFIG_ENV_IS_IN_MMC __weak int board_mmc_get_env_dev(int devno) { - return devno; } + return devno; +} int mmc_get_env_dev(void) { - volatile gd_t *pgd = gd; int ret; u32 boot; u16 boot_type; u8 boot_instance; - ret = g_rom_api->query_boot_infor(QUERY_BT_DEV, &boot, - ((uintptr_t)&boot) ^ QUERY_BT_DEV); - set_gd(pgd); + ret = rom_api_query_boot_infor(QUERY_BT_DEV, &boot); if (ret != ROM_API_OKAY) { puts("ROMAPI: failure at query_boot_info\n"); @@ -70,6 +75,82 @@ int mmc_get_env_dev(void) } #endif +/* + * SPEED_GRADE[5:4] SPEED_GRADE[3:0] MHz + * xx 0000 2300 + * xx 0001 2200 + * xx 0010 2100 + * xx 0011 2000 + * xx 0100 1900 + * xx 0101 1800 + * xx 0110 1700 + * xx 0111 1600 + * xx 1000 1500 + * xx 1001 1400 + * xx 1010 1300 + * xx 1011 1200 + * xx 1100 1100 + * xx 1101 1000 + * xx 1110 900 + * xx 1111 800 + */ +u32 get_cpu_speed_grade_hz(void) +{ + u32 speed, max_speed; + u32 val; + + fuse_read(2, 3, &val); + val = FIELD_GET(SPEED_GRADING_MASK, val) & 0xF; + + speed = MHZ(2300) - val * MHZ(100); + + if (is_imx93()) + max_speed = MHZ(1700); + + /* In case the fuse of speed grade not programmed */ + if (speed > max_speed) + speed = max_speed; + + return speed; +} + +/* + * `00` - Consumer 0C to 95C + * `01` - Ext. Consumer -20C to 105C + * `10` - Industrial -40C to 105C + * `11` - Automotive -40C to 125C + */ +u32 get_cpu_temp_grade(int *minc, int *maxc) +{ + u32 val; + + fuse_read(2, 3, &val); + val = FIELD_GET(MARKETING_GRADING_MASK, val); + + if (minc && maxc) { + if (val == TEMP_AUTOMOTIVE) { + *minc = -40; + *maxc = 125; + } else if (val == TEMP_INDUSTRIAL) { + *minc = -40; + *maxc = 105; + } else if (val == TEMP_EXTCOMMERCIAL) { + if (is_imx93()) { + /* imx93 only has extended industrial*/ + *minc = -40; + *maxc = 125; + } else { + *minc = -20; + *maxc = 105; + } + } else { + *minc = 0; + *maxc = 95; + } + } + return val; +} + static void set_cpu_info(struct sentinel_get_info_data *info) { gd->arch.soc_rev = info->soc; @@ -77,11 +158,34 @@ static void set_cpu_info(struct sentinel_get_info_data *info) memcpy((void *)&gd->arch.uid, &info->uid, 4 * sizeof(u32)); } +static u32 get_cpu_variant_type(u32 type) +{ + /* word 19 */ + u32 val = readl((ulong)FSB_BASE_ADDR + 0x8000 + (19 << 2)); + u32 val2 = readl((ulong)FSB_BASE_ADDR + 0x8000 + (20 << 2)); + bool npu_disable = !!(val & BIT(13)); + bool core1_disable = !!(val & BIT(15)); + u32 pack_9x9_fused = BIT(4) | BIT(17) | BIT(19) | BIT(24); + + if ((val2 & pack_9x9_fused) == pack_9x9_fused) + type = MXC_CPU_IMX9322; + + if (npu_disable && core1_disable) + return type + 3; + else if (npu_disable) + return type + 2; + else if (core1_disable) + return type + 1; + + return type; +} + u32 get_cpu_rev(void) { u32 rev = (gd->arch.soc_rev >> 24) - 0xa0; - return (MXC_CPU_IMX93 << 12) | (CHIP_REV_1_0 + rev); + return (get_cpu_variant_type(MXC_CPU_IMX93) << 12) | + (CHIP_REV_1_0 + rev); } #define UNLOCK_WORD 0xD928C520 /* unlock word */ @@ -180,21 +284,216 @@ static struct mm_region imx93_mem_map[] = { struct mm_region *mem_map = imx93_mem_map; +static unsigned int imx9_find_dram_entry_in_mem_map(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(imx93_mem_map); i++) + if (imx93_mem_map[i].phys == CFG_SYS_SDRAM_BASE) + return i; + + hang(); /* Entry not found, this must never happen. */ +} + +void enable_caches(void) +{ + /* If OPTEE runs, remove OPTEE memory from MMU table to avoid speculative prefetch + * If OPTEE does not run, still update the MMU table according to dram banks structure + * to set correct dram size from board_phys_sdram_size + */ + int i = 0; + /* + * please make sure that entry initial value matches + * imx93_mem_map for DRAM1 + */ + int entry = imx9_find_dram_entry_in_mem_map(); + u64 attrs = imx93_mem_map[entry].attrs; + + while (i < CONFIG_NR_DRAM_BANKS && + entry < ARRAY_SIZE(imx93_mem_map)) { + if (gd->bd->bi_dram[i].start == 0) + break; + imx93_mem_map[entry].phys = gd->bd->bi_dram[i].start; + imx93_mem_map[entry].virt = gd->bd->bi_dram[i].start; + imx93_mem_map[entry].size = gd->bd->bi_dram[i].size; + imx93_mem_map[entry].attrs = attrs; + debug("Added memory mapping (%d): %llx %llx\n", entry, + imx93_mem_map[entry].phys, imx93_mem_map[entry].size); + i++; entry++; + } + + icache_enable(); + dcache_enable(); +} + +__weak int board_phys_sdram_size(phys_size_t *size) +{ + phys_size_t start, end; + phys_size_t val; + + if (!size) + return -EINVAL; + + val = readl(REG_DDR_CS0_BNDS); + start = (val >> 16) << 24; + end = (val & 0xFFFF); + end = end ? end + 1 : 0; + end = end << 24; + *size = end - start; + + val = readl(REG_DDR_CS1_BNDS); + start = (val >> 16) << 24; + end = (val & 0xFFFF); + end = end ? end + 1 : 0; + end = end << 24; + *size += end - start; + + return 0; +} + int dram_init(void) { - gd->ram_size = PHYS_SDRAM_SIZE; + phys_size_t sdram_size; + int ret; + + ret = board_phys_sdram_size(&sdram_size); + if (ret) + return ret; + + /* rom_pointer[1] contains the size of TEE occupies */ + if (rom_pointer[1]) + gd->ram_size = sdram_size - rom_pointer[1]; + else + gd->ram_size = sdram_size; + + return 0; +} + +int dram_init_banksize(void) +{ + int bank = 0; + int ret; + phys_size_t sdram_size; + phys_size_t sdram_b1_size, sdram_b2_size; + + ret = board_phys_sdram_size(&sdram_size); + if (ret) + return ret; + + /* Bank 1 can't cross over 4GB space */ + if (sdram_size > 0x80000000) { + sdram_b1_size = 0x80000000; + sdram_b2_size = sdram_size - 0x80000000; + } else { + sdram_b1_size = sdram_size; + sdram_b2_size = 0; + } + + gd->bd->bi_dram[bank].start = PHYS_SDRAM; + if (rom_pointer[1]) { + phys_addr_t optee_start = (phys_addr_t)rom_pointer[0]; + phys_size_t optee_size = (size_t)rom_pointer[1]; + + gd->bd->bi_dram[bank].size = optee_start - gd->bd->bi_dram[bank].start; + if ((optee_start + optee_size) < (PHYS_SDRAM + sdram_b1_size)) { + if (++bank >= CONFIG_NR_DRAM_BANKS) { + puts("CONFIG_NR_DRAM_BANKS is not enough\n"); + return -1; + } + + gd->bd->bi_dram[bank].start = optee_start + optee_size; + gd->bd->bi_dram[bank].size = PHYS_SDRAM + + sdram_b1_size - gd->bd->bi_dram[bank].start; + } + } else { + gd->bd->bi_dram[bank].size = sdram_b1_size; + } + + if (sdram_b2_size) { + if (++bank >= CONFIG_NR_DRAM_BANKS) { + puts("CONFIG_NR_DRAM_BANKS is not enough for SDRAM_2\n"); + return -1; + } + gd->bd->bi_dram[bank].start = 0x100000000UL; + gd->bd->bi_dram[bank].size = sdram_b2_size; + } return 0; } +phys_size_t get_effective_memsize(void) +{ + int ret; + phys_size_t sdram_size; + phys_size_t sdram_b1_size; + + ret = board_phys_sdram_size(&sdram_size); + if (!ret) { + /* Bank 1 can't cross over 4GB space */ + if (sdram_size > 0x80000000) + sdram_b1_size = 0x80000000; + else + sdram_b1_size = sdram_size; + + if (rom_pointer[1]) { + /* We will relocate u-boot to top of dram1. TEE position has two cases: + * 1. At the top of dram1, Then return the size removed optee size. + * 2. In the middle of dram1, return the size of dram1. + */ + if ((rom_pointer[0] + rom_pointer[1]) == (PHYS_SDRAM + sdram_b1_size)) + return ((phys_addr_t)rom_pointer[0] - PHYS_SDRAM); + } + + return sdram_b1_size; + } else { + return PHYS_SDRAM_SIZE; + } +} + void imx_get_mac_from_fuse(int dev_id, unsigned char *mac) { - mac[0] = 0x1; - mac[1] = 0x2; - mac[2] = 0x3; - mac[3] = 0x4; - mac[4] = 0x5; - mac[5] = 0x6; + u32 val[2] = {}; + int ret; + + if (dev_id == 0) { + ret = fuse_read(39, 3, &val[0]); + if (ret) + goto err; + + ret = fuse_read(39, 4, &val[1]); + if (ret) + goto err; + + mac[0] = val[1] >> 8; + mac[1] = val[1]; + mac[2] = val[0] >> 24; + mac[3] = val[0] >> 16; + mac[4] = val[0] >> 8; + mac[5] = val[0]; + + } else { + ret = fuse_read(39, 5, &val[0]); + if (ret) + goto err; + + ret = fuse_read(39, 4, &val[1]); + if (ret) + goto err; + + mac[0] = val[1] >> 24; + mac[1] = val[1] >> 16; + mac[2] = val[0] >> 24; + mac[3] = val[0] >> 16; + mac[4] = val[0] >> 8; + mac[5] = val[0]; + } + + debug("%s: MAC%d: %02x.%02x.%02x.%02x.%02x.%02x\n", + __func__, dev_id, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); + return; +err: + memset(mac, 0, 6); + printf("%s: fuse read err: %d\n", __func__, ret); } int print_cpuinfo(void) @@ -224,6 +523,18 @@ void get_board_serial(struct tag_serialnr *serialnr) } #endif +static void save_reset_cause(void) +{ + struct src_general_regs *src = (struct src_general_regs *)SRC_GLOBAL_RBASE; + u32 srsr = readl(&src->srsr); + + /* clear srsr in sec mode */ + writel(srsr, &src->srsr); + + /* Save value to GPR1 to pass to nonsecure */ + writel(srsr, &src->gpr[0]); +} + int arch_cpu_init(void) { if (IS_ENABLED(CONFIG_SPL_BUILD)) { @@ -233,6 +544,9 @@ int arch_cpu_init(void) clock_init(); trdc_early_init(); + + /* Save SRC SRSR to GPR1 and clear it */ + save_reset_cause(); } return 0; @@ -466,3 +780,45 @@ int m33_prepare(void) return 0; } + +int psci_sysreset_get_status(struct udevice *dev, char *buf, int size) +{ + static const char *reset_cause[] = { + "POR ", + "JTAG ", + "IPP USER ", + "WDOG1 ", + "WDOG2 ", + "WDOG3 ", + "WDOG4 ", + "WDOG5 ", + "TEMPSENSE ", + "CSU ", + "JTAG_SW ", + "M33_REQ ", + "M33_LOCKUP ", + "UNK ", + "UNK ", + "UNK " + }; + + struct src_general_regs *src = (struct src_general_regs *)SRC_GLOBAL_RBASE; + u32 srsr; + u32 i; + int res; + + srsr = readl(&src->gpr[0]); + + for (i = ARRAY_SIZE(reset_cause); i > 0; i--) { + if (srsr & (BIT(i - 1))) + break; + } + + res = snprintf(buf, size, "Reset Status: %s\n", i ? reset_cause[i - 1] : "unknown reset"); + if (res < 0) { + dev_err(dev, "Could not write reset status message (err = %d)\n", res); + return -EIO; + } + + return 0; +} diff --git a/arch/arm/mach-imx/parse-container.c b/arch/arm/mach-imx/parse-container.c index a4214d53768..f7582825d6d 100644 --- a/arch/arm/mach-imx/parse-container.c +++ b/arch/arm/mach-imx/parse-container.c @@ -9,7 +9,7 @@ #include <spl.h> #include <asm/mach-imx/image.h> #ifdef CONFIG_AHAB_BOOT -#include <asm/arch/sci/sci.h> +#include <firmware/imx/sci/sci.h> #endif #define SEC_SECURE_RAM_BASE 0x31800000UL diff --git a/arch/arm/mach-imx/spl_imx_romapi.c b/arch/arm/mach-imx/spl_imx_romapi.c index 830d5d12c25..9164045115f 100644 --- a/arch/arm/mach-imx/spl_imx_romapi.c +++ b/arch/arm/mach-imx/spl_imx_romapi.c @@ -367,7 +367,7 @@ int board_return_to_bootrom(struct spl_image_info *spl_image, printf("USB boot\n"); break; default: - printf("Unknow (0x%x)\n", bstage); + printf("Unknown (0x%x)\n", bstage); } if (is_boot_from_stream_device(boot)) |