1 files changed, 2 insertions, 28 deletions
diff --git a/board/kontron/sl-mx8mm/spl.c b/board/kontron/sl-mx8mm/spl.c
index 5a513722c5d..09f81351dd4 100644
--- a/board/kontron/sl-mx8mm/spl.c
+++ b/board/kontron/sl-mx8mm/spl.c
@@ -35,8 +35,6 @@ enum {
 
 #define GPIO_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 #define I2C_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)
-#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
-#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
 #define TOUCH_RESET_GPIO	IMX_GPIO_NR(3, 23)
 
@@ -54,15 +52,6 @@ static iomux_v3_cfg_t const touch_gpio[] = {
 	IMX8MM_PAD_SAI5_RXD2_GPIO3_IO23 | MUX_PAD_CTRL(GPIO_PAD_CTRL)
 };
 
-static iomux_v3_cfg_t const uart_pads[] = {
-	IMX8MM_PAD_UART3_RXD_UART3_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
-	IMX8MM_PAD_UART3_TXD_UART3_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const wdog_pads[] = {
-	IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
 int spl_board_boot_device(enum boot_device boot_dev_spl)
 {
 	switch (boot_dev_spl) {
@@ -231,19 +220,6 @@ void spl_board_init(void)
 		printf("Failed to find clock node. Check device tree\n");
 }
 
-int board_early_init_f(void)
-{
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
-	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
-	set_wdog_reset(wdog);
-
-	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
-
-	return 0;
-}
-
 static int power_init_board(void)
 {
 	struct udevice *dev;
@@ -278,12 +254,8 @@ void board_init_f(ulong dummy)
 
 	init_uart_clk(2);
 
-	board_early_init_f();
-
 	timer_init();
 
-	preloader_console_init();
-
 	/* Clear the BSS. */
 	memset(__bss_start, 0, __bss_end - __bss_start);
 
@@ -293,6 +265,8 @@ void board_init_f(ulong dummy)
 		hang();
 	}
 
+	preloader_console_init();
+
 	enable_tzc380();
 
 	/* PMIC initialization */