diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/nokia/rx51/rx51.c | 37 | ||||
-rw-r--r-- | board/ti/j721e/evm.c | 37 | ||||
-rw-r--r-- | board/ti/j721s2/Kconfig | 63 | ||||
-rw-r--r-- | board/ti/j721s2/MAINTAINERS | 16 | ||||
-rw-r--r-- | board/ti/j721s2/Makefile | 8 | ||||
-rw-r--r-- | board/ti/j721s2/evm.c | 180 |
6 files changed, 336 insertions, 5 deletions
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c index 99ca36fbbea..a52691509da 100644 --- a/board/nokia/rx51/rx51.c +++ b/board/nokia/rx51/rx51.c @@ -31,6 +31,7 @@ #include <twl4030.h> #include <i2c.h> #include <video_fb.h> +#include <keyboard.h> #include <asm/global_data.h> #include <asm/io.h> #include <asm/setup.h> @@ -579,10 +580,10 @@ static u8 keybuf_head; static u8 keybuf_tail; /* - * Routine: rx51_kp_init + * Routine: rx51_kp_start * Description: Initialize HW keyboard. */ -int rx51_kp_init(void) +static int rx51_kp_start(struct udevice *dev) { int ret = 0; u8 ctrl; @@ -656,7 +657,7 @@ static void rx51_kp_fill(u8 k, u8 mods) * Routine: rx51_kp_tstc * Description: Test if key was pressed (from buffer). */ -int rx51_kp_tstc(struct stdio_dev *sdev) +static int rx51_kp_tstc(struct udevice *dev) { u8 c, r, dk, i; u8 intr; @@ -712,14 +713,36 @@ int rx51_kp_tstc(struct stdio_dev *sdev) * Routine: rx51_kp_getc * Description: Get last pressed key (from buffer). */ -int rx51_kp_getc(struct stdio_dev *sdev) +static int rx51_kp_getc(struct udevice *dev) { keybuf_head %= KEYBUF_SIZE; - while (!rx51_kp_tstc(sdev)) + while (!rx51_kp_tstc(dev)) WATCHDOG_RESET(); return keybuf[keybuf_head++]; } +static int rx51_kp_probe(struct udevice *dev) +{ + struct keyboard_priv *uc_priv = dev_get_uclass_priv(dev); + struct stdio_dev *sdev = &uc_priv->sdev; + + strcpy(sdev->name, "keyboard"); + return input_stdio_register(sdev); +} + +static const struct keyboard_ops rx51_kp_ops = { + .start = rx51_kp_start, + .tstc = rx51_kp_tstc, + .getc = rx51_kp_getc, +}; + +U_BOOT_DRIVER(rx51_kp) = { + .name = "rx51_kp", + .id = UCLASS_KEYBOARD, + .probe = rx51_kp_probe, + .ops = &rx51_kp_ops, +}; + static const struct mmc_config rx51_mmc_cfg = { .host_caps = MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS, .f_min = 400000, @@ -753,3 +776,7 @@ U_BOOT_DRVINFOS(rx51_i2c) = { U_BOOT_DRVINFOS(rx51_watchdog) = { { "rx51_watchdog" }, }; + +U_BOOT_DRVINFOS(rx51_kp) = { + { "rx51_kp" }, +}; diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c index 077d83420c9..ad85b9d5011 100644 --- a/board/ti/j721e/evm.c +++ b/board/ti/j721e/evm.c @@ -413,6 +413,40 @@ void configure_serdes_torrent(void) printf("phy_power_on failed !!\n"); } +void configure_serdes_sierra(void) +{ + struct udevice *dev, *lnk_dev; + struct phy serdes; + int ret, count, i; + + if (!IS_ENABLED(CONFIG_PHY_CADENCE_SIERRA)) + return; + + ret = uclass_get_device_by_driver(UCLASS_PHY, + DM_DRIVER_GET(sierra_phy_provider), + &dev); + if (ret) + printf("Sierra init failed:%d\n", ret); + + serdes.dev = dev; + serdes.id = 0; + + count = device_get_child_count(dev); + for (i = 0; i < count; i++) { + ret = device_get_child(dev, i, &lnk_dev); + if (ret) + printf("probe of sierra child node %d failed\n", i); + } + + ret = generic_phy_init(&serdes); + if (ret) + printf("phy_init failed!!\n"); + + ret = generic_phy_power_on(&serdes); + if (ret) + printf("phy_power_on failed !!\n"); +} + int board_late_init(void) { if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) { @@ -426,6 +460,9 @@ int board_late_init(void) if (board_is_j7200_som()) configure_serdes_torrent(); + if (board_is_j721e_som()) + configure_serdes_sierra(); + return 0; } diff --git a/board/ti/j721s2/Kconfig b/board/ti/j721s2/Kconfig new file mode 100644 index 00000000000..2e115f14171 --- /dev/null +++ b/board/ti/j721s2/Kconfig @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ +# David Huang <d-huang@ti.com> + +choice + prompt "K3 J721S2 board" + optional + +config TARGET_J721S2_A72_EVM + bool "TI K3 based J721S2 EVM running on A72" + select ARM64 + select SOC_K3_J721S2 + select BOARD_LATE_INIT + imply TI_I2C_BOARD_DETECT + select SYS_DISABLE_DCACHE_OPS + +config TARGET_J721S2_R5_EVM + bool "TI K3 based J721S2 EVM running on R5" + select CPU_V7R + select SYS_THUMB_BUILD + select SOC_K3_J721S2 + select K3_LOAD_SYSFW + select RAM + select SPL_RAM + select K3_DDRSS + imply SYS_K3_SPL_ATF + imply TI_I2C_BOARD_DETECT + +endchoice + +if TARGET_J721S2_A72_EVM + +config SYS_BOARD + default "j721s2" + +config SYS_VENDOR + default "ti" + +config SYS_CONFIG_NAME + default "j721s2_evm" + +source "board/ti/common/Kconfig" + +endif + +if TARGET_J721S2_R5_EVM + +config SYS_BOARD + default "j721s2" + +config SYS_VENDOR + default "ti" + +config SYS_CONFIG_NAME + default "j721s2_evm" + +config SPL_LDSCRIPT + default "arch/arm/mach-omap2/u-boot-spl.lds" + +source "board/ti/common/Kconfig" + +endif diff --git a/board/ti/j721s2/MAINTAINERS b/board/ti/j721s2/MAINTAINERS new file mode 100644 index 00000000000..323bd2353a7 --- /dev/null +++ b/board/ti/j721s2/MAINTAINERS @@ -0,0 +1,16 @@ +J721S2 BOARD +M: Aswath Govindraju <a-govindraju@ti.com> +S: Maintained +F: board/ti/j721s2 +F: include/configs/j721s2_evm.h +F: configs/j721s2_evm_r5_defconfig +F: configs/j721s2_evm_a72_defconfig +F: arch/arm/dts/k3-j721s2.dtsi +F: arch/arm/dts/k3-j721s2-main.dtsi +F: arch/arm/dts/k3-j721s2-mcu-wakeup.dtsi +F: arch/arm/dts/k3-j721s2-som-p0.dtsi +F: arch/arm/dts/k3-j721s2-common-proc-board.dts +F: arch/arm/dts/k3-j721s2-common-proc-board-u-boot.dtsi +F: arch/arm/dts//k3-j721s2-r5-common-proc-board.dts +F: arch/arm/dts/k3-j721s2-ddr.dtsi +F: arch/arm/dts/k3-j721s2-ddr-evm-lp4-4266.dtsi diff --git a/board/ti/j721s2/Makefile b/board/ti/j721s2/Makefile new file mode 100644 index 00000000000..9dced126994 --- /dev/null +++ b/board/ti/j721s2/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/ +# David Huang <d-huang@ti.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += evm.o diff --git a/board/ti/j721s2/evm.c b/board/ti/j721s2/evm.c new file mode 100644 index 00000000000..3c75ecfc0fe --- /dev/null +++ b/board/ti/j721s2/evm.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Board specific initialization for J721S2 EVM + * + * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/ + * David Huang <d-huang@ti.com> + * + */ + +#include <common.h> +#include <env.h> +#include <fdt_support.h> +#include <generic-phy.h> +#include <image.h> +#include <init.h> +#include <log.h> +#include <net.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <spl.h> +#include <asm/arch/sys_proto.h> +#include <dm.h> +#include <dm/uclass-internal.h> + +#include "../common/board_detect.h" + +#define board_is_j721s2_som() board_ti_k3_is("J721S2X-PM1-SOM") + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + return 0; +} + +int dram_init(void) +{ +#ifdef CONFIG_PHYS_64BIT + gd->ram_size = 0x100000000; +#else + gd->ram_size = 0x80000000; +#endif + + return 0; +} + +ulong board_get_usable_ram_top(ulong total_size) +{ +#ifdef CONFIG_PHYS_64BIT + /* Limit RAM used by U-Boot to the DDR low region */ + if (gd->ram_top > 0x100000000) + return 0x100000000; +#endif + + return gd->ram_top; +} + +int dram_init_banksize(void) +{ + /* Bank 0 declares the memory available in the DDR low region */ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_dram[0].size = 0x7fffffff; + gd->ram_size = 0x80000000; + +#ifdef CONFIG_PHYS_64BIT + /* Bank 1 declares the memory available in the DDR high region */ + gd->bd->bi_dram[1].start = CONFIG_SYS_SDRAM_BASE1; + gd->bd->bi_dram[1].size = 0x37fffffff; + gd->ram_size = 0x400000000; +#endif + + return 0; +} + +#ifdef CONFIG_SPL_LOAD_FIT +int board_fit_config_name_match(const char *name) +{ + if (!strcmp(name, "k3-j721s2-common-proc-board")) + return 0; + + return -1; +} +#endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +int ft_board_setup(void *blob, struct bd_info *bd) +{ + int ret; + + ret = fdt_fixup_msmc_ram(blob, "/bus@100000", "sram@70000000"); + if (ret < 0) + ret = fdt_fixup_msmc_ram(blob, "/interconnect@100000", + "sram@70000000"); + if (ret) + printf("%s: fixing up msmc ram failed %d\n", __func__, ret); + + return ret; +} +#endif + +#ifdef CONFIG_TI_I2C_BOARD_DETECT +int do_board_detect(void) +{ + int ret; + + ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS, + CONFIG_EEPROM_CHIP_ADDRESS); + if (ret) + pr_err("Reading on-board EEPROM at 0x%02x failed %d\n", + CONFIG_EEPROM_CHIP_ADDRESS, ret); + + return ret; +} + +int checkboard(void) +{ + struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA; + + if (do_board_detect()) + /* EEPROM not populated */ + printf("Board: %s rev %s\n", "J721S2X-PM1-SOM", "E1"); + else + printf("Board: %s rev %s\n", ep->name, ep->version); + + return 0; +} + +static void setup_board_eeprom_env(void) +{ + char *name = "j721s2"; + + if (do_board_detect()) + goto invalid_eeprom; + + if (board_is_j721s2_som()) + name = "j721s2"; + else + printf("Unidentified board claims %s in eeprom header\n", + board_ti_get_name()); + +invalid_eeprom: + set_board_info_env_am6(name); +} + +static void setup_serial(void) +{ + struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA; + unsigned long board_serial; + char *endp; + char serial_string[17] = { 0 }; + + if (env_get("serial#")) + return; + + board_serial = simple_strtoul(ep->serial, &endp, 16); + if (*endp != '\0') { + pr_err("Error: Can't set serial# to %s\n", ep->serial); + return; + } + + snprintf(serial_string, sizeof(serial_string), "%016lx", board_serial); + env_set("serial#", serial_string); +} +#endif + +int board_late_init(void) +{ + if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) { + setup_board_eeprom_env(); + setup_serial(); + } + + return 0; +} + +void spl_board_init(void) +{ +} |