diff options
Diffstat (limited to 'include/configs/M5249EVB.h')
| -rw-r--r-- | include/configs/M5249EVB.h | 66 |
1 files changed, 33 insertions, 33 deletions
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index f1da278d515..0e38eeb4a36 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -18,7 +18,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) #undef CONFIG_MONITOR_IS_IN_RAM /* no pre-loader required!!! ;-) */ @@ -26,9 +26,9 @@ * Clock configuration: enable only one of the following options */ -#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ -#define CONFIG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */ -#define CONFIG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */ +#undef CFG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_SYS_FAST_CLK 1 /* MCF5249 can run at 140MHz */ +#define CFG_SYS_CLK 132025600 /* MCF5249 can run at 140MHz */ /* * Low Level Configuration Settings @@ -36,14 +36,14 @@ * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ -#define CONFIG_SYS_MBAR2 0x80000000 +#define CFG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_SYS_MBAR2 0x80000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in internal SRAM */ #define LDS_BOARD_TEXT \ . = DEFINED(env_offset) ? env_offset : .; \ @@ -56,7 +56,7 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) +#define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE) #if 0 /* test-only */ #define CONFIG_PRAM 512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */ @@ -67,33 +67,33 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ #ifdef CONFIG_SYS_FLASH_CFI -# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ -# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } +# define CFG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */ +# define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE } #endif /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_FLASH_BASE | \ CF_ADDRMASK(2) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ +#define CFG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ CF_CACR_DBWE) /*----------------------------------------------------------------------- @@ -101,25 +101,25 @@ */ /* CS0 - AMD Flash, address 0xffc00000 */ -#define CONFIG_SYS_CS0_BASE 0xffe00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */ +#define CFG_SYS_CS0_BASE 0xffe00000 +#define CFG_SYS_CS0_CTRL 0x00001980 /* WS=0110, AA=1, PS=10 */ /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/ -#define CONFIG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ +#define CFG_SYS_CS0_MASK 0x003f0021 /* 4MB, AA=0, WP=0, C/I=1, V=1 */ /* CS1 - FPGA, address 0xe0000000 */ -#define CONFIG_SYS_CS1_BASE 0xe0000000 -#define CONFIG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */ -#define CONFIG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ +#define CFG_SYS_CS1_BASE 0xe0000000 +#define CFG_SYS_CS1_CTRL 0x00000d80 /* WS=0011, AA=1, PS=10 */ +#define CFG_SYS_CS1_MASK 0x00010001 /* 128kB, AA=0, WP=0, C/I=0, V=1*/ /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ -#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ -#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ +#define CFG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54*/ +#define CFG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ #endif /* M5249 */ |