diff options
Diffstat (limited to 'include/configs/M5275EVB.h')
| -rw-r--r-- | include/configs/M5275EVB.h | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 4eb4abea725..ff9f8535896 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -21,7 +21,7 @@ * (easy to change) */ -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash @@ -34,9 +34,9 @@ /* Available command configuration */ /* I2C */ -#define CONFIG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) -#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) -#define CONFIG_SYS_I2C_PINMUX_SET (0x000F) +#define CFG_SYS_I2C_PINMUX_REG (gpio_reg->par_feci2c) +#define CFG_SYS_I2C_PINMUX_CLR (0xFFF0) +#define CFG_SYS_I2C_PINMUX_SET (0x000F) #ifdef CONFIG_MCFFEC # define CONFIG_OVERWRITE_ETHADDR_ONCE @@ -54,7 +54,7 @@ "save\0" \ "" -#define CONFIG_SYS_CLK 150000000 +#define CFG_SYS_CLK 150000000 /* * Low Level Configuration Settings @@ -62,13 +62,13 @@ * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x40000000 +#define CFG_SYS_MBAR 0x40000000 /*----------------------------------------------------------------------- * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ /*----------------------------------------------------------------------- * Start addresses for the final memory configuration @@ -77,34 +77,34 @@ */ #define CFG_SYS_SDRAM_BASE 0x00000000 #define CFG_SYS_SDRAM_SIZE 16 /* SDRAM size in MB */ -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE +#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /*----------------------------------------------------------------------- * FLASH organization */ -#define CONFIG_SYS_FLASH_SIZE 0x200000 +#define CFG_SYS_FLASH_SIZE 0x200000 /*----------------------------------------------------------------------- * Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) -#define CONFIG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ CF_CACR_DISD | CF_CACR_INVI | \ CF_CACR_CEIB | CF_CACR_DCM | \ CF_CACR_EUSP) @@ -112,12 +112,12 @@ /*----------------------------------------------------------------------- * Memory bank definitions */ -#define CONFIG_SYS_CS0_BASE 0xffe00000 -#define CONFIG_SYS_CS0_CTRL 0x00001980 -#define CONFIG_SYS_CS0_MASK 0x001F0001 +#define CFG_SYS_CS0_BASE 0xffe00000 +#define CFG_SYS_CS0_CTRL 0x00001980 +#define CFG_SYS_CS0_MASK 0x001F0001 -#define CONFIG_SYS_CS1_BASE 0x30000000 -#define CONFIG_SYS_CS1_CTRL 0x00001900 -#define CONFIG_SYS_CS1_MASK 0x00070001 +#define CFG_SYS_CS1_BASE 0x30000000 +#define CFG_SYS_CS1_CTRL 0x00001900 +#define CFG_SYS_CS1_MASK 0x00070001 #endif /* _M5275EVB_H */ |