aboutsummaryrefslogtreecommitdiffstats
path: root/MAINTAINERS
Commit message (Collapse)AuthorAgeFilesLines
* Merge patch series "Add TI K3 PCIe Controller support for J7200"Tom Rini2024-10-211-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Siddharth Vadapalli <s-vadapalli@ti.com> says: Hello, This series adds support for the Cadence PCIe controller on TI's K3 family of SoCs to which the J7200 SoC belongs. The driver is an adaptation of the Linux driver (drivers/pci/controller/cadence/pci-j721e.c) and has been implemented specifically for Root-Complex mode of operation on the J7200 SoC. A minor set of changes will be sufficient to support other K3 SoCs as well with plans to implement it in the near future. Link: https://lore.kernel.org/r/20241014053924.4027491-1-s-vadapalli@ti.com
| * pci: Add TI K3 Cadence PCIe ControllerSiddharth Vadapalli2024-10-211-0/+1
| | | | | | | | | | | | | | | | Add support for the Cadence PCIe Controller present on TI's K3 SoCs. This driver is an adaptation of the Linux driver. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | binman: Add a tutorial on resolving test-coverage bugsSimon Glass2024-10-181-0/+1
| | | | | | | | | | | | | | | | | | Provide a short description of how tests work, why they are so critical and how to resolve gaps in Binman's test coverage. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
* | MAINTAINERS: add TCPM sectionSebastian Reichel2024-10-171-0/+9
| | | | | | | | | | | | | | | | | | Add new section for USB TypeC Port Manager (TCPM) support, which is needed to figure out cable orientation of USB-C plus and to do USB PD communication. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Marek Vasut <marex@denx.de>
* | MAINTAINERS: net: lwip: add myself as a maintainerJerome Forissier2024-10-161-0/+11
| | | | | | | | | | | | | | | | Add myself as a maintainer for the lwIP network stack integration code and network commands as well as the sandbox ethernet driver for lwIP. Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
* | MAINTAINERS: Add myself to the list of UFS maintainersNeil Armstrong2024-10-141-0/+1
|/ | | | | | | | | | | | Adding myself to continue Bhupesh's work to enhance and fix UFS support in U-Boot, especially for Qualcomm SoCs, and help review patches and maintain the UFS subsystem. Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Tested-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Tested-by: Julius Lehmann <lehmanju@devpi.de> Link: https://lore.kernel.org/r/20240930-topic-ufs-enhancements-v3-13-58234f84ab89@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
* Merge patch series "arm: Initial support for Analog Devices SC5xx boards"Tom Rini2024-10-031-0/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Oliver Gaskell <Oliver.Gaskell@analog.com> says: ADSP-SC5xx is a series of ARM-based DSPs. This comprises the armv7 based SC57x, SC58x and SC594 series, and the armv8 based SC598. This patch series includes configurations, init code, and minimal DTs to enable Analog Devices' evaluation boards for these SoCs to boot through SPL and into U-Boot Proper, as well as devicetree schemas for the added DTs. This patch series depends on ("arm: Add Analog Devices SC5xx Machine Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
| * arm: SC598-SOM-EZKIT initial supportOliver Gaskell2024-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for Analog Devices' SC598-SOM-EZKIT board. Includes: - CONFIG options common to all SC5xx SoCs - SoC specific configs in mach-sc5xx/Kconfig - SPL config options in common/spl/Kconfig - Memory Map for SPL - Necessary board-specific init functions - Board-specific Kconfig and environment in board/adi/ - Memory configuration Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Co-developed-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Trevor Woerner <twoerner@gmail.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
| * dt-bindings: timer: Add SC5xx Timer bindingsOliver Gaskell2024-10-031-0/+1
| | | | | | | | | | | | | | Add devicetree schema for the timer peripheral on Analog Devices SC5xx series SoCs. Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
| * dt-bindings: clock: Add SC5xx clock tree bindingsOliver Gaskell2024-10-031-0/+1
| | | | | | | | | | | | | | | | | | Add devicetree schema for the clock tree on Analog Devices SC5xx series SoCs. Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
| * dt-bindings: arm: Add SC5xx Series bindingOliver Gaskell2024-10-031-0/+1
| | | | | | | | | | | | Add devicetree schema for Analog Devices SC5xx series SoCs. Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
| * arm: dts: Support SC573-EZKITOliver Gaskell2024-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds minimal device tree for Analog Devices' SC573-EZKIT board and common files for the SC57x/SC5xx family. This also adds all sc5* devicetrees to ARM SC5XX in MAINTAINERS, and adds the ADSP Linux mailing list as the list for ARM SC5XX. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
* | configs: add qcm6490_defconfigCaleb Connolly2024-09-061-0/+1
| | | | | | | | | | | | | | | | Introduce a defconfig for the RB3 Gen 2 and other QCM6490 boards with a dedicated uefi partition. These can replace EDK2 entirely with U-Boot. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
* | Merge tag 'v2024.10-rc3' into nextTom Rini2024-08-191-0/+2
|\| | | | | | | Prepare v2024.10-rc3
| * am335x_hs_evm_spi_defconfig: Add MAINTAINERS entryTom Rini2024-08-151-0/+1
| | | | | | | | | | | | Add this to the existing entry for similar boards. Signed-off-by: Tom Rini <trini@konsulko.com>
| * MAINTAINERS: Include the TI docs under ARM TIDhruva Gole2024-08-081-0/+1
| | | | | | | | | | | | | | Add entry for the TI boards documentation under ARM TI Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Dhruva Gole <d-gole@ti.com>
* | upl: Add an end-to-end testSimon Glass2024-08-091-0/+1
| | | | | | | | | | | | | | | | Now that sandbox_vpl supports UPL, add a test that checks that the payload can be loaded by SPL and the handoff information passed through to U-Boot proper. Signed-off-by: Simon Glass <sjg@chromium.org>
* | upl: Add initial documentationSimon Glass2024-08-091-0/+1
| | | | | | | | | | | | | | Add some documentation to explain the basic concept along with a link to the full spec. Signed-off-by: Simon Glass <sjg@chromium.org>
* | upl: Add support for Universal Payload in SPLSimon Glass2024-08-091-0/+1
| | | | | | | | | | | | | | Add the basic code to create a handoff structure in SPL, so it can be passed to the next phase. For now this is not plumbed in. Signed-off-by: Simon Glass <sjg@chromium.org>
* | upl: Add a commandSimon Glass2024-08-091-0/+2
| | | | | | | | | | | | | | Add a 'upl' command to work with Universal Payload features. For now it only supports reading and writing a handoff structure. Signed-off-by: Simon Glass <sjg@chromium.org>
* | upl: Add basic testsSimon Glass2024-08-091-0/+1
| | | | | | | | | | | | | | Add some unit tests to check that we can write a UPL handoff and read it back. Signed-off-by: Simon Glass <sjg@chromium.org>
* | upl: Add support for reading a upl handoffSimon Glass2024-08-091-0/+7
|/ | | | | | | | Universal Payload provides a standard way of handing off control between two firmware phases. Add support for reading the handoff information into a structure. Signed-off-by: Simon Glass <sjg@chromium.org>
* MAINTAINERS: add entry for cpu commandHou Zhiqiang2024-08-021-0/+7
| | | | | | | Added the original author Simon and myself. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* doc: Add a description for bootmeth_androidMattijs Korpershoek2024-07-311-0/+1
| | | | | | | Add initial documentation for the Android bootmeth. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* doc: Move bootstd into its own directorySimon Glass2024-07-191-1/+1
| | | | | | | | | Before adding more files, move the bootstd docs into a new directory, with an index. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
* MAINTAINERS: Rename BOOTDEVICESimon Glass2024-07-191-1/+1
| | | | | | | | Rename this to BOOTSTD which is the normal name for the feature. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
* bootstd: Add a bootmeth for AndroidMattijs Korpershoek2024-07-181-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Android boot flow is a bit different than a regular Linux distro. Android relies on multiple partitions in order to boot. A typical boot flow would be: 1. Parse the Bootloader Control Block (BCB, misc partition) 2. If BCB requested bootonce-bootloader, start fastboot and wait. 3. If BCB requested recovery or normal android, run the following: 3.a. Get slot (A/B) from BCB 3.b. Run AVB (Android Verified Boot) on boot partitions 3.c. Load boot and vendor_boot partitions 3.d. Load device-tree, ramdisk and boot The AOSP documentation has more details at [1], [2], [3] This has been implemented via complex boot scripts such as [4]. However, these boot script are neither very maintainable nor generic. Moreover, DISTRO_DEFAULTS is being deprecated [5]. Add a generic Android bootflow implementation for bootstd. For this initial version, only boot image v4 is supported. [1] https://source.android.com/docs/core/architecture/bootloader [2] https://source.android.com/docs/core/architecture/partitions [3] https://source.android.com/docs/core/architecture/partitions/generic-boot [4] https://source.denx.de/u-boot/u-boot/-/blob/master/include/configs/meson64_android.h [5] https://lore.kernel.org/r/all/20230914165615.1058529-17-sjg@chromium.org/ Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Julien Masson <jmasson@baylibre.com> Tested-by: Guillaume La Roque <glaroque@baylibre.com> Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
* MAINTAINERS: IPQ40XX: add pinctrl driverRobert Marko2024-07-051-0/+1
| | | | | | | Pinctrl drivers were moved to a dedicated directory but the entry was never updated, so add the pinctrl-ipq4019 driver entry. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* MAINTAINERS: IPQ40XX: add clock-ipq4019 instead of reset driverRobert Marko2024-07-051-1/+1
| | | | | | | The reset handling was added to the clock drivers but the entry was never updated, so add the clock-ipq4019 driver instead. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* MAINTAINERS: IPQ40XX: update GCC dt-bindingsRobert Marko2024-07-051-2/+1
| | | | | | | The separate clock and reset dt-bindings for IPQ40XX were merged into one recently, but the entry was not updated so do it now. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* MAINTAINERS: IPQ40XX: remove Luka Kovacic as maintainerRobert Marko2024-07-051-1/+0
| | | | | | | Luka Kovacic is no longer at Sartura, so remove him as one of IPQ40xx maintainers. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* board: rockchip: add ArmSoM Sige7 Rk3588 boardJianfeng Liu2024-06-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by ArmSoM. There are two variants depending on the DRAM size : 8G and 16G. Specification: Rockchip Rk3588 SoC 4x ARM Cortex-A76, 4x ARM Cortex-A55 8/16GB memory LPDDR4x Mali G610MC4 GPU 2x MIPI CSI 2 multiple lanes connector 64GB/128GB on board eMMC uSD slot 1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C 1x HDMI 2.1 output 2x 2.5 Gbps Ethernet port 40-pin IO header including UART, SPI and I2C USB PD over USB Type-C Size: 92mm x 62mm Kernel commit: 81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board) Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* Merge tag 'v2024.07-rc4' into nextTom Rini2024-06-041-6/+1
|\ | | | | | | Prepare v2024.070-rc4
| * arm: exynos: Migrate E850-96 board to OF_UPSTREAMSam Protsenko2024-05-281-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use upstream device tree files and bindings. To do so: - imply (enable) OF_UPSTREAM option for E850-96 target - point DEFAULT_DEVICE_TREE in E850-96 config to upstream dts - remove now not needed local dts files, binding docs and headers - update MAINTAINERS and board/samsung/e850-96/MAINTAINERS correspondingly Upstream device tree files for Exynos850 SoC and E850-96 board are pretty much the same as local (removed) ones, so the conversion is rather straightforward and painless in this case. The appended dts file (arch/arm/dts/exynos850-e850-96-u-boot.dtsi) stays unchanged. The only remaining local dt-bindings doc for E850-96 board is exynos-pmu.yaml. It wasn't removed as it's quite different from Linux kernel version. Particularly U-Boot local version of exynos-pmu.yaml describes "samsung,uart-debug-1" property, which is not present in Linux kernel binding. Later it might be upstreamed to Linux kernel, and once it's done the U-Boot exynos-pmu.yaml binding can be removed. No functional change. Acked-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge patch series "FWU: Add support for FWU metadata version 2"WIP/24May2024-nextTom Rini2024-05-241-0/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sughosh Ganu <sughosh.ganu@linaro.org> says: The following patch series adds support for version 2 of the FWU metadata. The version 2 metadata structure is defined in the latest revision of the FWU specification [1]. The earlier versions of these patches were migrating to a version 2 only support in U-Boot, similar to TF-A. However, based on feedback from ST [2], this series has been updated to support both versions. A platform would still be needed to enable one of the two versions of metadata through a config symbol. TF-A has code which reads the FWU metadata and boots the platform from the active partition. TF-A has decided to migrate the FWU code to a version 2 only support. These changes have been merged in upstream TF-A. These changes have been tested on the ST DK2 board, which uses the GPT based partitioning scheme. Both V1 and V2 metadata versions have been tested on the DK2 board. These changes need to be tested on platforms with MTD partitioned storage devices.
| * | MAINTAINERS: add entry for FWU multi bank update featureSughosh Ganu2024-05-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Add an entry for the FWU Multi Bank Update feature. Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Tested-by: Michal Simek <michal.simek@amd.com>
* | | ARM: imx: Add doc/imx/ to i.MX MAINTAINERS entryMarek Vasut2024-05-241-0/+1
| | | | | | | | | | | | | | | | | | | | | Make sure i.MX maintainers are CCed on doc/imx/ patches. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* | | Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"WIP/20May2024-nextTom Rini2024-05-201-0/+16
| |/ |/| | | | | | | | | | | | | As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
* | Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""Tom Rini2024-05-191-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
* | MAINTAINERS: add USB gadget regex to u-boot-dfu treeMattijs Korpershoek2024-05-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | We try to split work with Marek on USB as following: - Mattijs handles USB gadget - Marek handles the rest of USB Add additional gadget patterns to the maintainers file so that I get cc'ed more often on USB gadget patches. Acked-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20240516-gadget-maintainer-v2-2-23cc916df434@baylibre.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
* | MAINTAINERS: add tree link for fastbootMattijs Korpershoek2024-05-161-0/+1
| | | | | | | | | | | | | | | | | | Fastboot patches go through the u-boot-dfu tree. Add a link in the maintainers file for it. Link: https://lore.kernel.org/r/20240516-gadget-maintainer-v2-1-23cc916df434@baylibre.com Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
* | Merge patch series "arm: Add Analog Devices SC5xx Machine Type"WIP/07May2024-nextTom Rini2024-05-071-0/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Greg Malysa <greg.malysa@timesys.com> says: This series adds support for the ADI SC5xx machine type and includes two core drivers that are required for being able to boot any board--a UART driver, the gptimer driver which is used as a clock reference (CNTVCNT is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our corresponding Linux support relies on u-boot configuring the clocks correctly before booting, so it is not possible to boot any board without the CGU/CDU configuration happening here. There are also no board files, device trees, or defconfigs included here, but some common definitions that will be used to build board files currently are. The sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended to be a drop-in replacement for the SC594 in terms of peripherals, with a Cortex-A55 instead. Some of the configuration code in dmcinit and clkinit is quite scary and causes a lot of checkpatch violations. It is modified from code initially provided by ADI, but it has not been fully rewritten. There's a question of how important it is to clean up this code--it has some quality violations, but it has been in use (including in production) for over two years and is known to work for performing the low level SoC initialization, while a rewrite might introduce timing or sequence bugs that could take a significant amount of time to detect in the future.
| * | drivers: timer: Add in driver support for ADI SC5XX-family GP timer peripheralGreg Malysa2024-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com> Co-developed-by: Angelo Dureghello <angelo.dureghello@timesys.com> Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
| * | drivers: serial: Add in UART for ADI SC5XX-family processorsNathan Barrett-Morrison2024-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
| * | drivers: clk: adi: Add in SC5XX-family clock driverNathan Barrett-Morrison2024-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the SC5XX clock trees which are required for reading clock speeds on the SoCs. This is largely a port of the same support for Linux, which has not yet been submitted upstream. Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
| * | arch: arm: Add Analog Devices SC5xx machine typeNathan Barrett-Morrison2024-05-071-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the SC5xx machine type from Analog Devices. This includes support for the SC57x, SC58x, SC59x, and SC59x-64 SoCs, which have many common features such as common ADI IP blocks, and SHARC DSP cores. This commit introduces core functionality required for all boards using an SC5xx SoC, such as: - SPL configuration - Required CPU hooks such as reset - Boot ROM interaction to load the stage 2 bootloader in the reference configuration. Other options are possible but not officially supported at this time - SoC-common configuration expected to be reused by all boards - Early initialization for system clocks and DDR controller Co-developed-by: Greg Malysa <greg.malysa@timesys.com> Signed-off-by: Greg Malysa <greg.malysa@timesys.com> Co-developed-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Ian Roberts <ian.roberts@timesys.com> Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com> Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com> Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com> Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
* | | MAINTAINERS: update Broadcom BCMBCA maintainerWilliam Zhang2024-05-031-2/+1
| | | | | | | | | | | | | | | | | | | | | Joel is no longer with Broadcom. Remove his email from bcmbca maintainer list and replace him with myself for stack protection maintainer. Signed-off-by: William Zhang <william.zhang@broadcom.com>
* | | MAINTAINERS: add entries for tee-related orphaned filesIgor Opaniuk2024-04-261-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add orphaned TEE/OP-TEE-related files to TEE subsystem entry in MAINTAINERS. This includes: - optee_rpmb cmd and test for it - Misc. OP-TEE tests - OP-TEE SCMI agent implementation - Documentation, including device tree bindings Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
* | | mach-snapdragon: use OF_UPSTREAMCaleb Connolly2024-04-231-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Switch to using upstream DT from dts/upstream. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
* | | MAINTAINERS: add Qualcomm mailing listCaleb Connolly2024-04-231-0/+2
|/ / | | | | | | | | | | | | | | | | | | | | Add the newly created u-boot-qcom mailing list to keep track of Qualcomm patches. Additionally, link to the U-Boot Snapdragon custodian tree. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Sumit Garg <sumit.garg@linaro.org> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
generated by cgit (git 2.34.1) at 2025-02-26 15:28:33 +0000