aboutsummaryrefslogtreecommitdiffstats
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* am335x, shc: adapt shc board to DMHeiko Schocher2019-02-012-129/+6
| | | | | | | | | | | | | | port the am335x based shc board to DM, to get rid of DW warnings when compiling U-Boot. - remove uneccessary board code - adapt defconfigs - remove unneeded defconfigs configs/am335x_shc_prompt_defconfig configs/am335x_shc_sdboot_prompt_defconfig Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: dts: am335x-shc: add u-boot specific dtsiHeiko Schocher2019-02-011-0/+1
| | | | | | | | add u-boot specific am335x-shc-u-boot.dtsi file, in which we add u-boot specific adaptions. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm: dts: add am335x-shc.dts for shc boardHeiko Schocher2019-02-011-0/+1
| | | | | | | | | | add DTS from linux tree commit "47bfa6d9dc8c060bf56554a465c9031e286d2f80" change for U-Boot: switch to SPDX-license identifier. Signed-off-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2019-01-301-0/+15
|\ | | | | | | - Enable DM_MMC support
| * sunxi: board: do MMC pinmux setup for DM_MMC buildsAndre Przywara2019-01-291-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling DM_MMC skips the call to mmc_pinmux_setup() in board.c, as this is supposed to be handled by the MMC driver, using DT information. However we don't have a pinctrl driver yet, but would still like to keep the working pinmux setup for our MMC devices. So bring this particular call back to the DM_MMC code flow. When booting from either SD card or eMMC, the SPL does the setup for us, but when booting from SPI or USB we must not skip this part. Fixes, boot via FEL or SPI flash, where the SPL won't setup the pinmux Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jagan Teki <jagan@openedev.com> [jagan: add Fix details on commit message] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | Merge tag 'u-boot-imx-20190129' of git://git.denx.de/u-boot-imxTom Rini2019-01-3018-179/+692
|\ \ | |/ |/| | | For 2019.04
| * ARM: imx6q_logic: Enable Falcon Mode and fatwriteAdam Ford2019-01-281-1/+47
| | | | | | | | | | | | | | | | | | This patch enables Falcon Mode by default and updates the README file to show instructions on how to run from the micro SD card or eMMC. This patch also enables fatwrite to help assist with writing the 'args' to the microSD card. Signed-off-by: Adam Ford <aford173@gmail.com>
| * ARM: DTS: imx6q-logicpd: Update DTS/DTSI filesAdam Ford2019-01-281-0/+3
| | | | | | | | | | | | | | | | The i.MX6 SOM and development kits have undergone significant updates and changes over the past few months. This re-sync's the U-Boot with Logic PD's BSP. Signed-off-by: Adam Ford <aford173@gmail.com>
| * imx6q_logic: Enable MMC booting from SPLAdam Ford2019-01-281-0/+72
| | | | | | | | | | | | | | | | The MMC booting wasn't previously fitting into the codespace. This patch enables MMC booting from the baseboard by reducing some DM overhead during SPL. Signed-off-by: Adam Ford <aford173@gmail.com>
| * arm: imx7s-warp: Convert to DM PMICBryan O'Donoghue2019-01-281-16/+11
| | | | | | | | | | | | | | | | | | | | | | This patch converts the warp7 and warp7_bl33 board ports over to using the DM PMIC model. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * warp7: defconfig: Switch to DM for I2CBryan O'Donoghue2019-01-281-24/+0
| | | | | | | | | | | | | | | | | | | | This commit switches to DM I2C for warp7 and warp7_bl33 defconfigs. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * arm: imx7s-warp: Convert to DM MMC initializationBryan O'Donoghue2019-01-281-34/+0
| | | | | | | | | | | | | | | | | | | | Converts from fixed initialization of MMC to DM initialization of MMC. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Peng Fan <peng.fan@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx8mq_evk/README: remove ARCH environment variableBaruch Siach2019-01-281-1/+0
| | | | | | | | | | | | | | There is no need to set the ARCH variable when building U-Boot. In fact, the ARCH name in U-Boot is 'arm'. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
| * imx8qxp: mek: update READMEPeng Fan2019-01-281-3/+5
| | | | | | | | | | | | Update README after we switch to use SPL Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * imx8qxp: mek: default enable SPLPeng Fan2019-01-283-3/+77
| | | | | | | | | | | | | | | | | | | | | | | | Enable SPL for i.MX8QXP MEK, and currently use SPL FIT. The SPL enable SPL_DM to use MMC/PINCTRL/POWER DOMAIN/CLK. Note: SPL FIT could not support secure boot chain, because i.MX8/8X only support i.MX container format. This container format has not been upstreamed, so we use FIT for now. When SPL container supported, we could switch to that. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * colibri_imx7: drop legacy usdhc supportStefan Agner2019-01-281-97/+0
| | | | | | | | | | | | | | Drop legacy pinmux/usdhc board configuration. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
| * arm: dts: imx7: colibri: split dt for raw NAND and eMMC devicesStefan Agner2019-01-281-0/+3
| | | | | | | | | | | | | | | | In preparation of adding CONFIG_DM_MMC support use separate device trees for raw NAND and eMMC devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
| * pico-imx7d: Add LCD supportFabio Estevam2019-01-281-0/+55
| | | | | | | | | | | | | | | | Add support for the VXT VL050-8048NT-C01 panel connected through the 24 bit parallel LCDIF interface. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * imx: Add PHYTEC phyBOARD-i.MX6UL-SeginMartyn Welch2019-01-286-0/+419
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port for the PHYTEC phyBOARD-i.MX6UL-Segin single board computer. Based on the PHYTEC phyCORE-i.MX6UL SOM (PCL063). CPU: Freescale i.MX6UL rev1.2 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 44C Reset cause: POR Board: PHYTEC phyCORE-i.MX6UL I2C: ready DRAM: 256 MiB NAND: 512 MiB MMC: FSL_SDHC: 0 In: serial Out: serial Err: serial Net: FEC0 Working: - Eth0 - i2C - MMC/SD - NAND - UART (1 & 5) - USB (host & otg) Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
* | linker: Modify linker scripts to be more genericTom Rini2019-01-263-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make use of "IMAGE_MAX_SIZE" and "IMAGE_TEXT_BASE" rather than CONFIG_SPL_MAX_SIZE and CONFIG_SPL_TEXT_BASE. This lets us re-use the same script for both SPL and TPL. Add logic to scripts/Makefile.spl to pass in the right value when preprocessing the script. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Jagan Teki <jagan@openedev.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Andreas Bießmann <andreas@biessmann.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: York Sun <york.sun@nxp.com> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Heiko Schocher <hs@denx.de> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> #da850evm & omap3_logic_somlv Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* | poplar: clean up board level mmc initialization codeShawn Guo2019-01-251-12/+0
|/ | | | | | | | We have converted mmc to driver model on Poplar. So let's clean up board level mmc initialization code. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2019-01-242-0/+17
|\
| * board: sun50i-h5: Add Emlid Neutis N5 supportAleksandr Aleksandrov2019-01-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Emlid Neutis N5 is a SoM based on Allwinner H5, has a WiFi & BT module, DDR3 RAM and eMMC. - add neutis-devboard target to dtb makefile - add dtsi file for Neutis N5 needs - add config file for Neutis N5 Dev board Signed-off-by: Aleksandr Aleksandrov <aleksandr.aleksandrov@emlid.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: update proper commit head] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * sunxi: board: Add i2c initialization for sun50iStefan Mavrodiev2019-01-181-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To use TWI0/1/2 the user can select CONFIG_I2C#_ENABLE. However even the controller is enabled, the mux for the pins are not set. This patch follows the existing mux method. Since the pads are different, separate check is added for each i2c. Tested with A64-SOM204 board. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | board: topic-miamiplus: Run IO PLL at 1000 MHzMike Looijmans2019-01-241-16/+14
| | | | | | | | | | | | | | | | | | | | The miamiplus can use GEM0 through MIO pins, which requires a 125 MHz TX clock to be generated. With the IO PLL at 1200 MHz this isn't possible, so change it to run at 1000 and adjust the divisors accordingly. Also set the GEM0 clock source to MIO instead of EMIO. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | topic-miamiplus: Run CPU at 800MHz for speedgrade-2Mike Looijmans2019-01-241-2/+2
| | | | | | | | | | | | | | | | The miamiplus contains a speedgrade-2 device, which may run the CPU at 800MHz. Change the PLL setting to 800MHz, and adapt the setpoints in the devicetree. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | arm64: zynqmp: Fix tcminit help text alignmentMichal Simek2019-01-241-5/+5
| | | | | | | | | | | | Trivial patch. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | arm64: zynqmp: Fix mmc node names to be in sync with kernelSiva Durga Prasad Paladugu2019-01-241-0/+4
| | | | | | | | | | | | | | | | | | | | | | This patches renames sd nodes in dts to be in line with kernel. This patch also modifies the references for the same in code. It checks mmc first to have no time penalty for new DT node names based on left-to-right expression evaluation. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | arm64: zynqmp: Protect board_late_init functionMichal Simek2019-01-241-0/+2
| | | | | | | | | | | | Function should be compiled only when CONFIG_BOARD_LATE_INIT is defined. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | MSCC: Add board support for Serval SoC family.Horatiu Vultur2019-01-233-0/+91
| | | | | | | | | | | | | | | | Add board support and configuration for Jaguar2 SoC family. The detection of the board type is based on the phy ids. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | MSCC: Add board support for Servalt SoC familyHoratiu Vultur2019-01-233-0/+69
| | | | | | | | | | | | | | | | Add board support, configuration and DTS for Servalt SoC family. Currently there is one board in this family. Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
* | MIPS: mscc: ocelot: add switch reset supportGregory CLEMENT2019-01-231-0/+24
| | | | | | | | | | | | | | On some ocelots platform a workaround is needed in order to be able to reset the switch without resetting the DDR. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
* | ARM: mvebu: add support for Allied Telesis x530Chris Packham2019-01-216-0/+243
| | | | | | | | | | | | | | | | | | | | | | This is a range of stackable network switches. The SoC is Armada-385 and there are a number of variants with differing network port configurations. The DP variants are intended for a harsher operating environment so they use a different i2c mux and fit industrial-temp parts. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | board: mvebu: drop unused ETH_PHY macro definitionsBaruch Siach2019-01-215-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | These macros are not used anywhere in the boards code. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Mario Six <mario.six@gdsys.cc> Cc: Dennis Gilmore <dgilmore@redhat.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: turris_mox: Support 1 GB version of Turris MoxMarek Behún2019-01-211-0/+16
| | | | | | | | | | | | | | | | Use get_ram_size to determine if the RAM size on Turris Mox is 512 MiB or 1 GiB. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: turris_mox: Read info (and ethaddrs) from OTPMarek Behún2019-01-214-3/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for reading One-Time Programmable memory via mailbox, which communicates with CZ.NIC's firmware on the Secure Processor (Cortex-M3) of Armada 3720. Display product serial number and additional info, and also set MAC addresses. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: turris_mox: Check and configure modulesMarek Behún2019-01-211-1/+233
| | | | | | | | | | | | | | | | Check if Mox modules are connected in supported mode, then configure the MDIO addresses of switch modules. Signed-off-by: Marek Behún <marek.behun@nic.cz> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: turris_mox: Change SERDES map depending on module topologyMarek Behún2019-01-211-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | When SFP module is connected directly to CPU module we want the SGMII lane speed at 1.25 Gbps. This is a temporary solution till there is a comphy driver in the kernel capable of changing SGMII speed at runtime. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | arm: mvebu: turris_mox: Cosmetic restructurizationMarek Behún2019-01-211-47/+89
| | | | | | | | | | | | | | | | | | | | Restructure the board initialization source. Remove the module_topology environment variable since it won't be needed. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge tag 'fsl-qoriq-for-v2019.04-rc1' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2019-01-1811-14/+315
|\ \ | | | | | | | | | | | | | | | | | | Add TFA boot flow for more boards Add TFA boot defconfig for ls1088a and ls2088a. Add dts fixup for PCIe endpoint and root complex.
| * | armv8: ls2088ardb: Update MAINTAINERSYork Sun2019-01-171-0/+1
| | | | | | | | | | | | | | | Signed-off-by: York Sun <york.sun@nxp.com> CC: Rajesh Bhagat <rajesh.bhagat@nxp.com>
| * | armv8: ls1088ardb: Update MAINTAINERSYork Sun2019-01-171-0/+1
| | | | | | | | | | | | | | | Signed-off-by: York Sun <york.sun@nxp.com> CC: Rajesh Bhagat <rajesh.bhagat@nxp.com>
| * | ls1046aqds: Bypass xfi port fixup for KR modeFlorinel Iordache2019-01-171-10/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot makes a fixup for LS1046AQDS board to setup the properties 'fixed-link' and 'phy-connection-type' to 'xgmii' but in case of backplane mode this fixup is not correct because it causes the KR link to fail and so it must be bypassed in order to keep the link in KR mode as it is defined in DTS. Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> [YS: Fix compiling warning] Reviewed-by: York Sun <york.sun@nxp.com>
| * | fsl-layerscape: dpaa: fix fsl-mc status in fdt with bootefiMian Yousaf Kaukab2019-01-174-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fsl-mc lazyapply command applies dpl from efi_exit_boot_services(). Status of fsl-mc node in working fdt is updated at this stage. However, an efi application like grub may already have copied the fdt. So the updates to fdt done at efi_exit_boot_services() may not be visible to the OS. Fix it by updating fdt earlier if fsl-mc lazyapply command is used. Fixes: b7b8410a8f (ls2080: Exit dpaa only right before exiting U-Boot) Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls2088aqds: Add TFABOOT supportRajesh Bhagat2019-01-172-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls2088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls2088ardb: Add TFABOOT supportRajesh Bhagat2019-01-174-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls2088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - define BOOTCOMMAND for TFABOOT - remove EL3 specific erratas for TFABOOT Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls1088aqds: Add TFABOOT supportPankit Garg2019-01-171-0/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1088aqds_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | armv8: ls1088ardb: Add TFABOOT supportPankit Garg2019-01-173-0/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TFABOOT support includes: - ls1088ardb_tfa_defconfig to be loaded by trusted firmware - environment address and size changes for TFABOOT - MC address changes for TFABOOT - define BOOTCOMMAND for TFABOOT - ifc chip select changes for TFABOOT Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Pankit Garg <pankit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | configs: Remove am43xx_evm_ethboot_defconfigVignesh R2019-01-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | am43xx_evm_ethboot_defconfig is not being actively used and has not been moved to DM or DT. Also, ethboot cannot be tested on AM43xx EVM as such due EVM limitations. Therefore delete it. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | configs: Remove unused am335x_evm defconfigsVignesh R2019-01-181-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | These defconfigs don't seem be actively used any more, and have not been moved to adapt DM or DT. Therefore delete them. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2025-02-25 07:25:04 +0000