aboutsummaryrefslogtreecommitdiffstats
path: root/include/configs/gw_ventana.h
Commit message (Collapse)AuthorAgeFilesLines
* imx: Remove CFG_MXC_USB_PORTSCFabio Estevam2024-08-301-3/+0
| | | | | | | | | | The definition of CFG_MXC_USB_PORTSC as (PORT_PTS_UTMI | PORT_PTS_PTW) can be removed from mx5/mx6/mx7/mx8m board config files as it is the default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c. Suggested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Tim Harvey <tharvey@gateworks.com>
* imx: Remove CFG_MXC_USB_FLAGSFabio Estevam2024-08-301-1/+0
| | | | | | | | | | | | CFG_MXC_USB_FLAGS is only used for drivers/usb/host/ehci-mx5.c, so it can be removed from all the imx6/imx7/imx8m board config files. mx51evk.h is the only place CFG_MXC_USB_FLAGS is not set to 0. Suggested-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* gw_ventana: Remove unneeded commentsFabio Estevam2024-08-231-30/+1
| | | | | | | | | Remove several comments that do not apply anymore to the current file content. While at it, write 'PMIC' into a single line for consistency. Signed-off-by: Fabio Estevam <festevam@denx.de>
* global: Migrate CONFIG_POWER_PFUZE100_I2C_ADDR to CFGTom Rini2022-12-231-1/+1
| | | | | | Perform a simple rename of CONFIG_POWER_PFUZE100_I2C_ADDR to CFG_POWER_PFUZE100_I2C_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Migrate CONFIG_POWER_LTC3676_I2C_ADDR to CFGTom Rini2022-12-231-1/+1
| | | | | | Perform a simple rename of CONFIG_POWER_LTC3676_I2C_ADDR to CFG_POWER_LTC3676_I2C_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Migrate CONFIG_MXC_USB_FLAGS et al to CFGTom Rini2022-12-231-2/+2
| | | | | | | | | Perform simple renames of: CONFIG_MXC_USB_FLAGS to CFG_MXC_USB_FLAGS CONFIG_MXC_USB_PORT to CFG_MXC_USB_PORT CONFIG_MXC_USB_PORTSC to CFG_MXC_USB_PORTSC Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Migrate CONFIG_MXC_UART_BASE to CFGTom Rini2022-12-231-1/+1
| | | | | | Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: Remove CONFIG_USBD_HSTom Rini2022-12-221-1/+0
| | | | | | | This define is not enabled by the only platform which currently enables the legacy option of CONFIG_USB_DEVICE. We can drop this code. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_HOSTNAME et al to KconfigTom Rini2022-12-221-2/+0
| | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_GATEWAYIP CONFIG_HOSTNAME CONFIG_IPADDR CONFIG_NETMASK CONFIG_ROOTPATH CONFIG_SERVERIP CONFIG_UBOOTPATH To do this, we introduce a CONFIG_USE_ form of each of the above and change include/env_default.h to test for that to be set before setting a value. Further, we don't want to stringify the IP address related values as they are now properly strings via Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_IMX_VIDEO_SKIP et al to KconfigTom Rini2022-12-051-4/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_IMX_VIDEO_SKIP CONFIG_IMX_HDMI Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_HWCONFIG to KconfigTom Rini2022-12-051-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_HWCONFIG Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_POWER_LTC3676 et al to KconfigTom Rini2022-12-051-2/+0
| | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_POWER_FSL CONFIG_POWER_FSL_MC13892 CONFIG_POWER_HI6553 CONFIG_POWER_LTC3676 CONFIG_POWER_PFUZE100 CONFIG_POWER_PFUZE3000 CONFIG_POWER_SPI CONFIG_POWER_TPS65090_EC CONFIG_POWER_TPS65218 CONFIG_POWER_TPS65910 Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini2022-12-051-2/+2
| | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini2022-12-051-1/+1
| | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.hTom Rini2022-12-051-1/+0
| | | | | | | There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini2022-11-101-1/+1
| | | | | | | Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SYS_MAX_NAND_DEVICE to KconfigTom Rini2022-11-101-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_SYS_MAX_NAND_DEVICE Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_HIDE_LOGO_VERSION to KconfigSimon Glass2022-10-301-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_HIDE_LOGO_VERSION Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SYS_BOOTM_LEN to KconfigWIP/2022-07-07-Kconfig-migrations-dead-code-removalTom Rini2022-07-071-3/+0
| | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_BOOTM_LEN As part of this, rework error handling in boot/bootm.c so that we pass the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not be available to host tools but we do know the size that we passed to malloc(). Cc: Soeren Moch <smoch@web.de> Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_PCIE_IMX to KconfigTom Rini2022-07-051-3/+0
| | | | | | | This converts the following to Kconfig: CONFIG_PCIE_IMX Signed-off-by: Tom Rini <trini@konsulko.com>
* gw_ventana: Migrate to using CONFIG_EXTRA_ENV_TEXTTom Rini2022-06-281-148/+0
| | | | | | | | | | | | Move the environment text over from being set via CONFIG_EXTRA_ENV_SETTINGS in include/configs/gw_ventana.h and over to plain text in board/gateworks/gw_ventana/gw_ventana.env. This lets us drop CONFIG_EXTRA_ENV_SETTINGS_COMMON as everything resides in a single environment file now. Cc: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Tim Harvey <tharvey@gateworks.com>
* Complete migration of MTDPARTS_DEFAULT / MTDIDS_DEFAULT, include in environmentTom Rini2022-06-281-2/+0
| | | | | | | | | - Ensure that everyone setting mtdids= and mtdparts= is doing so via the CONFIG options. - If the CONFIG options are set, ensure that the default environment sets mtdparts / mtdids. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_LBA48 et al to KconfigTom Rini2022-06-281-7/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_LBA48 CONFIG_SYS_64BIT_LBA Signed-off-by: Tom Rini <trini@konsulko.com>
* ata: dwc_ahsata: Remove legacy non-CONFIG_AHCI codeTom Rini2022-06-281-2/+0
| | | | | | | The migration deadline for this has passed and all boards have been updated, remove this legacy code and references for it. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_EHCI_HCD_INIT_AFTER_RESET to KconfigTom Rini2022-06-281-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_EHCI_HCD_INIT_AFTER_RESET Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR et al to KconfigTom Rini2022-06-061-2/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to KconfigTom Rini2022-06-061-3/+0
| | | | | | | This converts the following to Kconfig: CONFIG_SYS_NAND_SPL_KERNEL_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_SPL_ARGS_ADDR to KconfigTom Rini2022-06-061-1/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_SPL_ARGS_ADDR In doing so, we also consistently use this variable for SPL_OS_BOOT and not CONFIG_SYS_FDT_BASE in some cases. Signed-off-by: Tom Rini <trini@konsulko.com>
* Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini2022-06-061-5/+0
| | | | | | | | | | | | | | - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
* board: gateworks: gw_ventana: use comomn GSC driverTim Harvey2022-04-211-3/+0
| | | | | | | | | | | | | | | | Use the common GSC driver. This allows us to do some additional cleanup: - use the GSC driver functions - move waiting for the EEPROM to the SPL int (it will always be ready after this) - move eeprom functions into eeprom file and elimate GSC_I2C_BUS - eliminate some redundant EEPROM reads (the EEPROM must be read in SPL before relocation, in SPL after relocation, and in U-Boot init. All subsequent uses can use the global structure) - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* video: Drop CONFIG_VIDEO_BMP_LOGOSimon Glass2022-03-281-1/+0
| | | | | | This option is not implemented anymore. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SCSI_AHCI_PLAT et al to KconfigSimon Glass2022-02-091-1/+0
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SCSI_AHCI_PLAT CONFIG_SYS_SCSI_MAX_SCSI_ID CONFIG_SYS_SCSI_MAX_LUN CONFIG_SYS_SATA_MAX_DEVICE Drop CONFIG_SCSI for everything except the sandbox build. We only need one build for tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
* imx: ventana: correct splashimage load addressAndrey Zhizhikin2022-02-051-1/+1
| | | | | | | | | | | | | | | Commit 72d81360aabd ("global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR") dropped the usage of LOADADDR and replaced it with SYS_LOADADDR. Use the correct macro in environment by replacing CONFIG_LOADADDR with CONFIG_SYS_LOADADDR. Fixes: d75ebf3482c3 ("imx: ventana: fix splash logo drawing") Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Cc: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-By: Tim Harvey <tharvey@gateworks.com>
* spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to KconfigAlexandru Gagniuc2022-01-211-1/+0
| | | | | | | | | | | | | | | | | Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* video: Convert CONFIG_VIDEO_LOGO to KconfigSimon Glass2021-12-261-1/+0
| | | | | | | | | | | | This converts the following to Kconfig: CONFIG_VIDEO_LOGO Note that this option depends on CONFIG_DM_VIDEO now, since cfb_console is deprecated. The only relevant code is now in splash.c Drop the check for DM_VIDEO in that file. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini2021-12-011-6/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_I2C_EDID et al to KconfigTom Rini2021-11-121-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_I2C_EDID CONFIG_I2C_EEPROM Signed-off-by: Tom Rini <trini@konsulko.com>
* imx: ventana: fix splash logo drawingTim Harvey2021-10-071-0/+1
| | | | | | | | | | After mxc_ipuv3 DM_VIDEO conversion showing splash image doesn't work. Fix this by adding new requirements: - splashimage env variable. - CONFIG_SPLASH_SCREEN - CONFIG_CMD_BMP Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to KconfigTom Rini2021-10-061-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_SYS_NAND_U_BOOT_LOCATIONS CONFIG_SYS_NAND_U_BOOT_OFFS Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: Finish migration of CONFIG_MACH_TYPEWIP/2021-09-07-ATAGs-and-related-migrationTom Rini2021-09-071-2/+0
| | | | | | | | | | | As this is only useful when booting with ATAGs, which are now largely disabled, remove this value for the remaining platforms. We have a few places in the code that had been testing for MACH_TYPE as a sort of internal logic. Update those to use different but still correct CONFIG symbols. Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Tom Rini <trini@konsulko.com>
* imx: Convert SERIAL_TAG support to ENV_VARS_UBOOT_RUNTIME_CONFIGTom Rini2021-09-071-3/+0
| | | | | | | | | | | | | No iMX platforms have supported ATAG-based booting. They have however re-used the CONFIG_SERIAL_TAG option as a way to enable support of reading the OTP fuses and setting the serial# environment variable in some cases. Change the warp7 support to use this symbol, use this for updating the rest of the imx7 code, and update the imx8 conditionals. Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP i.MX U-Boot Team <uboot-imx@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* i2c: Convert CONFIG_POWER_I2C et al to KconfigSimon Glass2021-09-041-2/+0
| | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
* power: Rename CONFIG_POWER to CONFIG_POWER_LEGACYSimon Glass2021-09-041-1/+1
| | | | | | | | | | | | | | | This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini2021-08-311-3/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
* Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini2021-08-301-4/+0
| | | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini2021-08-301-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini2021-08-301-1/+0
| | | | | | | | | | | First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
* i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass2021-07-281-1/+1
| | | | | | | | | | | | | | It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* imx: ventana: increase SYS_BOOTM_LENTim Harvey2021-07-101-0/+3
| | | | | | Increase SYS_BOOM_LEN from the default 16M in imx6_common to 64M. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
* imx: ventana: enable dm support for PCI and FEC ethernetTim Harvey2021-06-091-10/+0
| | | | | | | | | | | | | | | | Enable driver model support for FEC ethernet which allows us to remove the iomux and board_eth_init function. Replace the toggling of the ethernet phy reset with dt configuration. Enable driver model support for PCI which allows us to remove the eth1000_initialize() call. Additionally enable PCI_INIT_R to scan for PCI devices on init such as the e1000 that is present on the GW552x. Convert board_pci_fixup to use dm callback and remove pcidisable env variable which is not supported for DM_PCI and thus leave PCI always enabled during init. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
generated by cgit (git 2.34.1) at 2025-02-28 05:50:46 +0000