aboutsummaryrefslogtreecommitdiffstats
path: root/include/configs/udoo_neo.h
Commit message (Collapse)AuthorAgeFilesLines
* udoo_neo: Move to DM for REGULATOR/PMIC/I2C driversPeter Robinson2023-02-031-6/+0
| | | | | | | | This moves over the PMIC power init to DM and the associated i2c and regulator bits. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@denx.de>
* global: Migrate CONFIG_POWER_PFUZE3000_I2C_ADDR to CFGTom Rini2022-12-231-1/+1
| | | | | | Perform a simple rename of CONFIG_POWER_PFUZE3000_I2C_ADDR to CFG_POWER_PFUZE3000_I2C_ADDR Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Migrate CONFIG_MXC_UART_BASE to CFGTom Rini2022-12-231-1/+1
| | | | | | Perform a simple rename of CONFIG_MXC_UART_BASE to CFG_MXC_UART_BASE Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Migrate CONFIG_EXTRA_ENV_SETTINGS to CFGTom Rini2022-12-231-1/+1
| | | | | | Perform a simple rename of CONFIG_EXTRA_ENV_SETTINGS to CFG_EXTRA_ENV_SETTINGS Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_POWER_LTC3676 et al to KconfigTom Rini2022-12-051-1/+0
| | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_POWER_FSL CONFIG_POWER_FSL_MC13892 CONFIG_POWER_HI6553 CONFIG_POWER_LTC3676 CONFIG_POWER_PFUZE100 CONFIG_POWER_PFUZE3000 CONFIG_POWER_SPI CONFIG_POWER_TPS65090_EC CONFIG_POWER_TPS65218 CONFIG_POWER_TPS65910 Signed-off-by: Tom Rini <trini@konsulko.com>
* global: Move remaining CONFIG_SYS_* to CFG_SYS_*Tom Rini2022-12-051-2/+2
| | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* global: Move remaining CONFIG_SYS_SDRAM_* to CFG_SYS_SDRAM_*Tom Rini2022-12-051-1/+1
| | | | | | | | | | The rest of the unmigrated CONFIG symbols in the CONFIG_SYS_SDRAM namespace do not easily transition to Kconfig. In many cases they likely should come from the device tree instead. Move these out of CONFIG namespace and in to CFG namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* imx6/imx7: Remove now empty imx6_spl.h and imx7_spl.hTom Rini2022-12-051-2/+0
| | | | | | | There are now no flags being set in these files, so remove them. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespaceTom Rini2022-11-101-1/+1
| | | | | | | Migrate all of COFIG_SYS_FSL* to the CFG_SYS namespace. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Migrate CUSTOM_SYS_INIT_SP_ADDR to Kconfig using system-constants.hTom Rini2022-06-061-5/+0
| | | | | | | | | | | | | | - Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
* udoo_neo: Enable support for USB and storagePeter Robinson2022-01-071-0/+1
| | | | | | | Enable support for USB and USB storage on the UDOO Neo. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* udoo_neo: Fixes for booting from the mSD cardPeter Robinson2022-01-071-2/+2
| | | | | | | | | This fixes booting from the mSD card from both SPL and when using it for the OS booting. It also cleans up a few mmc booting bits that are no longer needed. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
* i2c: Convert CONFIG_POWER_I2C et al to KconfigSimon Glass2021-09-041-2/+0
| | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_POWER_I2C CONFIG_POWER_LEGACY They are handled at the same time due to a dependency between them. Update the Makefile rule to use legacy power only in U-Boot proper. Unfortunately a separate rule is needed in SPL to be able to build legacy power. Add SPL related symbols for both, to allow for SPL-only usage. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> [trini: More SPL related cleanups, reword commit message] Signed-off-by: Tom Rini <trini@konsulko.com>
* power: Rename CONFIG_POWER to CONFIG_POWER_LEGACYSimon Glass2021-09-041-1/+1
| | | | | | | | | | | | | | | This option is used in pre-driver model code and much of it has never been converted to driver model. We want to add a new option to enable power support, so we can use a simple rule in the Makefile. Rename this one, which is really about a particular implementation of power. Also update the pmic.h header file so it either includes the legacy API or the driver model one. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* Convert CONFIG_SYS_MALLOC_LEN to KconfigTom Rini2021-08-311-3/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_MALLOC_LEN Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Rick Chen <rick@andestech.com>
* global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDRTom Rini2021-08-311-3/+3
| | | | | | | | | - In most of the codebase, we reference CONFIG_SYS_LOAD_ADDR and not CONFIG_LOADADDR. - Generally, CONFIG_SYS_LOADADDR is set to CONFIG_LOADADDR and then as noted, we use CONFIG_SYS_LOADADDR. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_I2C_MXC et al to KconfigTom Rini2021-08-301-4/+0
| | | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_MXC CONFIG_SYS_I2C_MXC_I2C1 CONFIG_SYS_I2C_MXC_I2C2 CONFIG_SYS_I2C_MXC_I2C3 CONFIG_SYS_I2C_MXC_I2C4 Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_I2C_SPEED et al to KconfigTom Rini2021-08-301-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_SPEED CONFIG_SYS_I2C_SLAVE Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_I2C_LEGACY to Kconfig and add CONFIG_[ST]PL_SYS_I2C_LEGACYTom Rini2021-08-301-1/+0
| | | | | | | | | | | First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig. Next, as you cannot have SYS_I2C_LEGACY and DM_I2C at the same time, introduce CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only in SPL. Finally, for some PowerPC cases we also need CONFIG_TPL_SYS_I2C_LEGACY support. Convert all of the existing users to one or more symbols. Signed-off-by: Tom Rini <trini@konsulko.com>
* i2c: Rename CONFIG_SYS_I2C to CONFIG_SYS_I2C_LEGACYSimon Glass2021-07-281-1/+1
| | | | | | | | | | | | | | It is quite confusing that CONFIG_SYS_I2C selects the legacy I2C and CONFIG_DM_I2C selects the current I2C. The deadline to migrate I2C is less than a year away. Also we want to have a CONFIG_I2C for U-Boot proper just like we have CONFIG_SPL_I2C for SPL, so we can simplify the Makefile rules. Rename this symbol so it is clear it is going away. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* ARM: imx: udoo_neo: Convert to ethernet DMPeter Robinson2021-04-201-10/+0
| | | | | | | | | | Convert the UDOO Neo to ethernet DM support. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Francesco Montefoschi <francesco.montefoschi@udoo.org> Cc: Breno Lima <breno.lima@nxp.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* configs: migrate CONFIG_IMX_THERMAL to defconfigsTom Rini2020-12-071-4/+0
| | | | | | Done via moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini2020-08-081-1/+0
| | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_MXC_UART to KconfigTom Rini2020-07-171-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_MXC_UART Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Peng Fan <peng.fan@nxp.com>
* treewide: mem: Move mtest related defines to KconfigAshok Reddy Soma2020-05-081-2/+0
| | | | | | | | | | | Move below defines which are used by mtest utility to Kconfig. CONFIG_SYS_MEMTEST_START CONFIG_SYS_MEMTEST_END Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> [trini: Fix kmcoge5ne board, re-run migration as well] Signed-off-by: Tom Rini <trini@konsulko.com>
* env: Finish migration of common ENV optionsTom Rini2019-11-201-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* Convert CONFIG_MII et al to KconfigAdam Ford2018-08-171-1/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini2018-08-161-1/+0
| | | | | | | | | | | We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to KconfigAlex Kiernan2018-04-081-1/+0
| | | | | | | | | Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel at gmail.com>
* Remove config_distro_defaults.hAdam Ford2018-02-231-1/+0
| | | | | | | With the contents of config_distro_defaults.h migrated to Kconfig, we can remove this header file completely Signed-off-by: Adam Ford <aford173@gmail.com>
* Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMANDTom Rini2017-11-171-4/+0
| | | | | | | | | | | We first introduce CONFIG_USE_BOOTCOMMAND, similar to CONFIG_USE_BOOTARGS. We then migrate CONFIG_BOOTCOMMAND for most CONFIG_DISTRO_DEFAULT users. In some cases platforms have a complex scheme around this usage, and these have been defered for the moment so that platform maintainers can work on a migration plan. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Move PHY_MICREL and PHY_MICREL_KSZ90X1 to KconfigAlexandru Gagniuc2017-08-071-2/+0
| | | | | Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Move PHYLIB to KconfigAlexandru Gagniuc2017-08-071-1/+0
| | | | | Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to KconfigSimon Glass2017-07-251-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* Remove various unused interrupt related codeTom Rini2017-04-061-1/+0
| | | | | | | | | | | | | With d53ecad92f06 some unused interrupt related code was removed. However all of these options are currently unused. Rather than migrate some of these options to Kconfig we just remove the code in question. The only related code changes here are that in some cases we use CONFIG_STACKSIZE in non-IRQ related context. In these cases we rename and move the value local to the code in question. Fixes: d53ecad92f06 ("Merge branch 'master' of git://git.denx.de/u-boot-sunxi") Signed-off-by: Tom Rini <trini@konsulko.com>
* mx6sx: udoo_neo: use different load address for ramdiskPeter Robinson2017-02-191-1/+1
| | | | | | | | The fdt_addr and ramdisk_addr_r are currently both defined to 0x83000000 and that's not going to work well for anyone. Move the ramdisk_addr_r to 0x84000000. Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
* mx6sx: udoo_neo: Define the default serial consolePeter Robinson2017-02-191-0/+1
| | | | | | | | Standard boot processes including distro boot generally expect the default console to be defined. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Remove ramdiskaddr environment variableBreno Lima2017-01-271-1/+0
| | | | | | | Remove unused ramdiskaddr environment variable. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Remove trailing semicolon and spaceBreno Lima2017-01-271-1/+1
| | | | | | | | Remove the trailing semicolon and space. It's not necessary to have it on the last condition. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add fdt_addr_r environment variableBreno Lima2017-01-271-0/+1
| | | | | | | | | | | | | According to doc/README.distro: "fdt_addr_r: Mandatory. The location in RAM where the DTB will be loaded or copied to when processing the fdtdir/devicetreedir or fdt/devicetree options in extlinux.conf." So add the fdt_addr_r environment variable. Suggested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Breno Lima <breno.lima@nxp.com>
* Convert CONFIG_BOARD_EARLY_INIT_F to KconfigSimon Glass2017-01-251-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_BOARD_EARLY_INIT_F Signed-off-by: Simon Glass <sjg@chromium.org>
* config: Move CONFIG_BOARD_LATE_INIT to defconfigsJagan Teki2017-01-211-1/+0
| | | | | Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@openedev.com>
* udoo_neo: Use 'fdtfile' variable nameFabio Estevam2017-01-021-6/+6
| | | | | | | | | | 'fdtfile' is the preferred name for the variable that contains the device tree blob according to the README file. It also makes it consistent with other i.MX boards that use config_distro, so change it accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Add Ethernet supportBreno Lima2016-12-161-1/+16
| | | | | | | | UDOO Neo boards has one FEC port connected to KSZ8091, add support for it. Tested on a UDOO Neo Full with "dhcp zImage" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add PFUZE300 PMIC supportBreno Lima2016-12-161-0/+13
| | | | | | | | UDOO Neo boards has a PFUZE300 connected to I2C1 bus. Tested on a UDOO Neo Full with "pmic PFUZE3000 dump" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add thermal supportBreno Lima2016-12-161-0/+2
| | | | | | | Add thermal support on the Kconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove console optionBreno Lima2016-12-161-1/+0
| | | | | | | It's not necessary to define the console option as we use the distro config. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove mmcautodetect optionBreno Lima2016-12-161-1/+0
| | | | | | | It's not necessary to define the mmcautodetect as it is not used anywhere. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove USDHC3 supportBreno Lima2016-12-161-1/+0
| | | | | | | | It's not necessary to support USDHC3 in U-Boot as it's being used for the WLAN. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
generated by cgit (git 2.34.1) at 2025-02-28 16:12:05 +0000