aboutsummaryrefslogtreecommitdiffstats
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-05-2612-86/+176
|\
| * armv8: LS2080A: Adjust memory map for secure boot headers for NOR-bootUdit Agarwal2017-05-232-10/+10
| | | | | | | | | | | | | | | | | | This patch adjusts memory map for secure boot headers on LS2080AQDS and LS2080ARDB platforms. Secure boot headers are placed on NOR flash at offset 0x00600000. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-bootSantan Kumar2017-05-233-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adjusts memory map for images on LS2080ARDB and LS2080AQDS NOR flash as below Image Flash Offset RCW+PBI 0x00000000 Boot firmware (U-Boot) 0x00100000 Boot firmware Environment 0x00300000 PPA firmware 0x00400000 PHY firmware 0x00980000 DPAA2 MC 0x00A00000 DPAA2 DPL 0x00D00000 DPAA2 DPC 0x00E00000 Kernel.itb 0x01000000 Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1046AAlison Wang2017-05-233-12/+12
| | | | | | | | | | | | | | | | | | This patch is to adjust the memory mapping for FLash/SD card on LS1046AQDS and LS1046ARDB, such as FMAN firmware load address, U-Boot start address on serial flash and environment address. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1043AAlison Wang2017-05-233-15/+15
| | | | | | | | | | | | | | | | | | | | This patch is to adjust the memory mapping for FLash/SD card on LS1043AQDS and LS1043ARDB, such as PPA firmware load address, FMAN firmware load address, QE firmware load address, U-Boot start address on serial flash and environment address. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * arm: ls1021a: Adjust memory mapping for Flash/SD card on LS1021AQDS/TWRAlison Wang2017-05-232-10/+10
| | | | | | | | | | | | | | | | | | This patch is to adjust the memory mapping for FLash/SD card on LS1021AQDS and LS1021ATWR, such as U-Boot start address on serial Flash, QE firmware load address and environment address. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080ardb: Add LS2081ARDB board supportPriyanka Jain2017-05-231-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | LS2081ARDB board is similar to LS2080ARDB board with few differences It hosts LS2081A SoC Default boot source is QSPI-boot It does not have IFC interface RTC and QSPI flash device are different It provides QIXIS access via I2C Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080ardb: Add QSPI-boot supportPriyanka Jain2017-05-233-10/+56
| | | | | | | | | | | | | | | | | | | | QSPI-boot is supported on LS2088ARDB RevF board with LS2088A SoC. LS2088ARDB RevF Board has limitation that QIXIS can not be accessed. CONFIG_FSL_QIXIS is not enabled. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043ardb: Make NET independent of FManYork Sun2017-05-231-5/+8
| | | | | | | | | | | | | | | | This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> Acked-by: Mingkai Hu <mingkai.hu@nxp.com>
| * armv8: ls1046ardb: Make NET independent of FManYork Sun2017-05-231-6/+9
| | | | | | | | | | | | | | | | This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> Acked-by: Mingkai Hu <mingkai.hu@nxp.com>
| * armv8: ls1012a: fix the size of flash for multiple boardsSuresh Gupta2017-05-231-1/+1
| | | | | | | | | | | | | | LS1012AFRDM, LS1012ARDB, LS1012AQDS all have S25FS512S flash of 64MB size. Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
| * armv8: layperscape: remove CONFIG_SPI_FLASH_BAR from some platformsSuresh Gupta2017-05-233-3/+0
| | | | | | | | | | | | | | | | ls1012ardb, ls1046ardb, ls2080ardb have S25FS512S flash which does not support Bank Address Register commands. Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1046a: enable PCI command toolHou Zhiqiang2017-05-231-0/+10
| | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini2017-05-262-10/+0
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Move FTMAC100 to where it should be, alphabetically in drivers/net/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: drivers/net/Kconfig
| * | nds32: eth: Support ftmac100 DM.rick2017-05-232-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support Andestech eth ftmac100 device tree flow on AG101P/AE3XX platform. Verification: Boot linux kernel via dhcp and bootm ok. NDS32 # setenv bootm_size 0x2000000;setenv fdt_high 0x1f00000; NDS32 # dhcp 0x600000 10.0.4.97:boomimage-310y-ae300-spi.bin BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4899 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'boomimage-310y-ae300-spi.bin'. Load address: 0x600000 Loading: ################################################################# ################################################################# ################################################################# ... ... ################################### 233.4 KiB/s done Bytes transferred = 13872076 (d3abcc hex) NDS32 # dhcp 0x2000000 10.0.4.97:ae300.dtb BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4592 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'ae300.dtb'. Load address: 0x2000000 Loading: # 82 KiB/s done Bytes transferred = 2378 (94a hex) NDS32 # bootm 0x600000 - 0x2000000 Image Name: Created: 2017-03-22 6:52:03 UTC Image Type: NDS32 Linux Kernel Image (uncompressed) Data Size: 13872012 Bytes = 13.2 MiB Load Address: 0000c000 Entry Point: 0000c000 Verifying Checksum ... OK Booting using the fdt blob at 0x2000000 Loading Kernel Image ... OK Loading Device Tree to 01efc000, end 01eff949 ... OK Linux version 3.10.102-20375-gb0034c1-dirty (rick@app09) (gcc version 4.9.3 (2016-07-06_nds32le-linux-glibc-v3_experimental) ) #293 PREEMPT Wed Mar 22 14:49:28 CST 2017 CPU: NDS32 N13, AndesCore ID(wb), CPU_VER 0x0d11103f(id 13, rev 17, cfg 4159) ... ... Signed-off-by: rick <rick@andestech.com>
* | | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2017-05-232-12/+67
|\ \ \ | |/ / |/| |
| * | ARM: rmobile: salvator-x: Enable SCIF2 clockMarek Vasut2017-05-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | There are two UARTs on the board, so enable the clock for the second one as well. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add USB supportMarek Vasut2017-05-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the EHCI USB. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add DVFS and PMIC supportMarek Vasut2017-05-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for rebooting the board using the ROHM BD9571MWV I2C PMIC, but keep the CPU reboot option as a fallback. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add RAVB ethernet supportMarek Vasut2017-05-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the AVB ethernet on the Salvator-X board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add SD supportMarek Vasut2017-05-221-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the SD card slots on the Salvator-X board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Adjust UART clockMarek Vasut2017-05-221-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The UART uses internal SCIF clock except on R8A7795 H3 WS1.0 . Use the internal clock and ignore the early version of the chip. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Set default device treeMarek Vasut2017-05-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Set default device tree file in the salvator-x_defconfig and use it in the environment. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Move OF_LIBFDT and CMD_FDT to board configMarek Vasut2017-05-221-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Move these two Kconfig symbols to the salvator-x_defconfig. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Add R8A7796 supportMarek Vasut2017-05-221-5/+26
| | | | | | | | | | | | | | | | | | | | | | | | Add Kconfig entry for the R8A7796 RCar M3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Update link address to match latest BL2Marek Vasut2017-05-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Update the CONFIG_SYS_TEXT_BASE to match BL2 Rev.1.0.9 and newer, which loads the U-Boot to 0x50000000 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Merge git://git.denx.de/u-boot-sunxiTom Rini2017-05-221-4/+13
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't get Kconfig errors on platforms without SPL, ie sandbox (without SPL). Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | sunxi: Store the device tree name in the SPL headerSiarhei Siamashka2017-05-171-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates the mksunxiboot tool to optionally add the default device tree name string to the SPL header. This information can be used by the firmware upgrade tools to protect users from harming themselves by trying to upgrade to an incompatible bootloader. The primary use case here is a non-removable bootable media (such as NAND, eMMC or SPI flash), which already may have a properly working, but a little bit outdated bootloader installed. For example, the user may download or build a new U-Boot image for "Cubieboard", and then attemept to install it on a "Cubieboard2" hardware by mistake as a replacement for the already existing bootloader. If this happens, the flash programming tool can identify this problem and warn the user. The size of the SPL header is also increased from 64 bytes to 96 bytes to provide enough space for the device tree name string. [Andre: split patch to remove OF_LIST hash feature] Signed-off-by: Siarhei Siamashka <siarhei.siamashka@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
| * | | sunxi: enable automatic FIT build for 64-bit SoCsAndre Przywara2017-05-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Allwinner SoCs with 64-bit cores use an ARM Trusted Firmware binary, which needs to be loaded alongside U-Boot proper. Set the respective Kconfig options to let them select this feature and also automatically build the FIT image. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [Rename Kconfig path to arch/arm/mach-sunxi/Kconfig] Signed-off-by: Jagan Teki <jagan@openedev.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | | sunxi: A64: move SPL stack to end of SRAM A2Andre Przywara2017-05-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPL stack is usually located at the end of SRAM A1, where it grows towards the end of the SPL. For the really big AArch64 binaries the stack overwrites code pretty soon, so move the SPL stack to the end of SRAM A2, which is unused at this time. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Jagan Teki <jagan@openedev.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini2017-05-222-8/+285
|\ \ \ \
| * | | | nds32: Support AE3XX platform.rick2017-05-222-7/+280
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support Andestech AE3xx platform: serial, timer device tree flow. Signed-off-by: rick <rick@andestech.com>
| * | | | nds32: Support AG101P serial DM.rick2017-05-221-2/+6
| | |/ / | |/| | | | | | | | | | | | | | | | | | Support AG101P serial device tree flow. Signed-off-by: rick <rick@andestech.com>
* | | | ColdFire: Remove rogue 'CONFIG_SYS_NO_FLASH' embedded within another CONFIG_ ↵Lothar Waßmann2017-05-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | name The original commit for the MCF54418TWR ColdFire development board support defined a 'CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN' which obviously has a rogue 'CONFIG_SYS_NO_FLASH' embedded in the intended 'CONFIG_SYS_FAULT_ECHO_LINK_DOWN' define. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
* | | | Convert CONFIG_CMD_LZMADEC to KconfigSimon Glass2017-05-221-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_LZMADEC Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_LZMA to KconfigSimon Glass2017-05-2211-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_LZMA Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Kconfig: Drop CONFIG_CMD_LOADYSimon Glass2017-05-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | This is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_IRQ to KconfigSimon Glass2017-05-2257-59/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IRQ Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | Convert CONFIG_CMD_JFFS2 to KconfigSimon Glass2017-05-2259-72/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_JFFS2 Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_IOTRACE to KconfigSimon Glass2017-05-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IOTRACE Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_IOLOOP to KconfigSimon Glass2017-05-222-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IOLOOP Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_IO to KconfigSimon Glass2017-05-222-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IO Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Kconfig: Drop CONFIG_CMD_IMX_FUSESimon Glass2017-05-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | This option is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Kconfig: Drop CONFIG_CMD_IMXOTPSimon Glass2017-05-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | This option is not used in U-Boot. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_IMMAP to KconfigSimon Glass2017-05-224-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IMMAP Also move this command out of the cmd/ directory since it is PowerPC-specific. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Kconfig: Add a CONFIG_IDE optionSimon Glass2017-05-229-15/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_IDE to KconfigSimon Glass2017-05-2252-63/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IDE Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_HDMIDETECT to KconfigSimon Glass2017-05-229-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_HDMIDETECT Note that we cannot do 'default y if VIDEO' because this option is only enabled for a small subset of mx6 boards. Also this command is is not a great implementation (it doesn't use driver model). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | Convert CONFIG_CMD_HD44760 to KconfigSimon Glass2017-05-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_HD44760 Also drop CONFIG_CMD_HD44780 which appears to be a typo. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_HASH to KconfigSimon Glass2017-05-2225-113/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_HASH Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework slightly, enable on some boards again] Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit (git 2.34.1) at 2025-02-27 08:56:01 +0000