ata: Make sure "chanid" is relative to PCI device for bootorder file

When specifying drives in the bootorder file, the "drive@x" parameter
should be relative to the given PCI device and not relative to the
total number of ATA controllers in the machine.  This patch separates
the tracking of "chanid" (channel number relative to a given PCI
devices) from the "ataid" (channel number relative to the total number
of ATA channels).

Reported-by: Jonathan A. Kollasch <jakllsch@kollasch.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

1 files changed, 13 insertions, 12 deletions

diff --git a/src/hw/ata.c b/src/hw/ata.c
index 3efc6ab5..fbbbbc1b 100644
--- a/src/hw/ata.c
+++ b/src/hw/ata.c
@@ -718,7 +718,7 @@ init_atadrive(struct atadrive_s *dummy, u16 *buffer)
     memset(adrive, 0, sizeof(*adrive));
     adrive->chan_gf = dummy->chan_gf;
     adrive->slave = dummy->slave;
-    adrive->drive.cntl_id = adrive->chan_gf->chanid * 2 + dummy->slave;
+    adrive->drive.cntl_id = adrive->chan_gf->ataid * 2 + dummy->slave;
     adrive->drive.removable = (buffer[0] & 0x80) ? 1 : 0;
     return adrive;
 }
@@ -743,7 +743,7 @@ init_drive_atapi(struct atadrive_s *dummy, u16 *buffer)
     char model[MAXMODEL+1];
     char *desc = znprintf(MAXDESCSIZE
                           , "DVD/CD [ata%d-%d: %s ATAPI-%d %s]"
-                          , adrive->chan_gf->chanid, adrive->slave
+                          , adrive->chan_gf->ataid, adrive->slave
                           , ata_extract_model(model, MAXMODEL, buffer)
                           , ata_extract_version(buffer)
                           , (iscd ? "DVD/CD" : "Device"));
@@ -795,7 +795,7 @@ init_drive_ata(struct atadrive_s *dummy, u16 *buffer)
     char model[MAXMODEL+1];
     char *desc = znprintf(MAXDESCSIZE
                           , "ata%d-%d: %s ATA-%d Hard-Disk (%u %ciBytes)"
-                          , adrive->chan_gf->chanid, adrive->slave
+                          , adrive->chan_gf->ataid, adrive->slave
                           , ata_extract_model(model, MAXMODEL, buffer)
                           , ata_extract_version(buffer)
                           , (u32)adjsize, adjprefix);
@@ -869,7 +869,7 @@ ata_detect(void *data)
         u8 sc = inb(iobase1+ATA_CB_SC);
         u8 sn = inb(iobase1+ATA_CB_SN);
         dprintf(6, "ata_detect ata%d-%d: sc=%x sn=%x dh=%x\n"
-                , chan_gf->chanid, slave, sc, sn, dh);
+                , chan_gf->ataid, slave, sc, sn, dh);
         if (sc != 0x55 || sn != 0xaa || dh != newdh)
             continue;
 
@@ -916,16 +916,17 @@ ata_detect(void *data)
 
 // Initialize an ata controller and detect its drives.
 static void
-init_controller(struct pci_device *pci, int irq
+init_controller(struct pci_device *pci, int chanid, int irq
                 , u32 port1, u32 port2, u32 master)
 {
-    static int chanid = 0;
+    static int ataid = 0;
     struct ata_channel_s *chan_gf = malloc_fseg(sizeof(*chan_gf));
     if (!chan_gf) {
         warn_noalloc();
         return;
     }
-    chan_gf->chanid = chanid++;
+    chan_gf->ataid = ataid++;
+    chan_gf->chanid = chanid;
     chan_gf->irq = irq;
     chan_gf->pci_bdf = pci ? pci->bdf : -1;
     chan_gf->pci_tmp = pci;
@@ -933,7 +934,7 @@ init_controller(struct pci_device *pci, int irq
     chan_gf->iobase2 = port2;
     chan_gf->iomaster = master;
     dprintf(1, "ATA controller %d at %x/%x/%x (irq %d dev %x)\n"
-            , chanid, port1, port2, master, irq, chan_gf->pci_bdf);
+            , ataid, port1, port2, master, irq, chan_gf->pci_bdf);
     run_thread(ata_detect, chan_gf);
 }
 
@@ -969,7 +970,7 @@ init_pciata(struct pci_device *pci, u8 prog_if)
         port2 = PORT_ATA1_CTRL_BASE;
         irq = IRQ_ATA1;
     }
-    init_controller(pci, irq, port1, port2, master);
+    init_controller(pci, 0, irq, port1, port2, master);
 
     if (prog_if & 4) {
         port1 = (pci_config_readl(bdf, PCI_BASE_ADDRESS_2)
@@ -982,7 +983,7 @@ init_pciata(struct pci_device *pci, u8 prog_if)
         port2 = PORT_ATA2_CTRL_BASE;
         irq = IRQ_ATA2;
     }
-    init_controller(pci, irq, port1, port2, master ? master + 8 : 0);
+    init_controller(pci, 1, irq, port1, port2, master ? master + 8 : 0);
 }
 
 static void
@@ -1014,9 +1015,9 @@ ata_scan(void)
     if (CONFIG_QEMU && hlist_empty(&PCIDevices)) {
         // No PCI devices found - probably a QEMU "-M isapc" machine.
         // Try using ISA ports for ATA controllers.
-        init_controller(NULL, IRQ_ATA1
+        init_controller(NULL, 0, IRQ_ATA1
                         , PORT_ATA1_CMD_BASE, PORT_ATA1_CTRL_BASE, 0);
-        init_controller(NULL, IRQ_ATA2
+        init_controller(NULL, 1, IRQ_ATA2
                         , PORT_ATA2_CMD_BASE, PORT_ATA2_CTRL_BASE, 0);
         return;
     }