diff options
| author | Nikolay Nikolov <nickysn@users.sourceforge.net> | 2018-02-10 13:52:14 +0200 |
|---|---|---|
| committer | Kevin O'Connor <kevin@koconnor.net> | 2018-02-15 00:18:14 -0500 |
| commit | f9cc969b3e67010627b3de6e989752e01b333ce2 (patch) | |
| tree | d356f63886fa084b77d33221274f779fec7e3fac /src/hw | |
| parent | b00a03a49e28d518435deeb22d119bbd959e78a3 (diff) | |
| download | seabios-f9cc969b3e67010627b3de6e989752e01b333ce2.tar.gz | |
floppy: Execute a SPECIFY command after sensing the media type
The SPECIFY command sets the Step Rate Time, Head Load Time, Head Unload Time
and the DMA enable/disable bit.
Signed-off-by: Nikolay Nikolov <nickysn@users.sourceforge.net>
Diffstat (limited to 'src/hw')
| -rw-r--r-- | src/hw/floppy.c | 22 |
1 files changed, 20 insertions, 2 deletions
diff --git a/src/hw/floppy.c b/src/hw/floppy.c index 16989c29..5a7e6b97 100644 --- a/src/hw/floppy.c +++ b/src/hw/floppy.c @@ -35,6 +35,8 @@ #define FLOPPY_FORMAT_GAPLEN 0x6c #define FLOPPY_PIO_TIMEOUT 1000 #define FLOPPY_IRQ_TIMEOUT 5000 +#define FLOPPY_SPECIFY1 0xAF // step rate 12ms, head unload 240ms +#define FLOPPY_SPECIFY2 0x02 // head load time 4ms, DMA used #define FLOPPY_DOR_MOTOR_D 0x80 // Set to turn drive 3's motor ON #define FLOPPY_DOR_MOTOR_C 0x40 // Set to turn drive 2's motor ON @@ -51,8 +53,8 @@ // floppy here struct floppy_ext_dbt_s diskette_param_table2 VARFSEG = { .dbt = { - .specify1 = 0xAF, // step rate 12ms, head unload 240ms - .specify2 = 0x02, // head load time 4ms, DMA used + .specify1 = FLOPPY_SPECIFY1, + .specify2 = FLOPPY_SPECIFY2, .shutoff_ticks = FLOPPY_MOTOR_TICKS, // ~2 seconds .bps_code = FLOPPY_SIZE_CODE, .sectors = 18, @@ -250,6 +252,7 @@ floppy_wait_irq(void) #define FC_READ (0xe6 | (8<<8) | (7<<12) | FCF_WAITIRQ) #define FC_WRITE (0xc5 | (8<<8) | (7<<12) | FCF_WAITIRQ) #define FC_FORMAT (0x4d | (5<<8) | (7<<12) | FCF_WAITIRQ) +#define FC_SPECIFY (0x03 | (2<<8) | (0<<12)) // Send the specified command and it's parameters to the floppy controller. static int @@ -392,6 +395,15 @@ floppy_drive_recal(u8 floppyid) } static int +floppy_drive_specify(void) +{ + u8 param[2]; + param[0] = FLOPPY_SPECIFY1; + param[1] = FLOPPY_SPECIFY2; + return floppy_pio(FC_SPECIFY, param); +} + +static int floppy_drive_readid(u8 floppyid, u8 data_rate, u8 head) { // Set data rate. @@ -468,6 +480,12 @@ floppy_prep(struct drive_s *drive_gf, u8 cylinder) ret = floppy_media_sense(drive_gf); if (ret) return ret; + + // Execute a SPECIFY command (sets the Step Rate Time, + // Head Load Time, Head Unload Time and the DMA enable/disable bit). + ret = floppy_drive_specify(); + if (ret) + return ret; } // Seek to cylinder if needed. |