// MPT Fusion boot support. // // Copyright (c) 2012 Verizon, Inc. // Copyright (C) 2016 Paolo Bonzini // // This file may be distributed under the terms of the GNU LGPLv3 license. #include "biosvar.h" // GET_GLOBALFLAT #include "block.h" // struct drive_s #include "blockcmd.h" // scsi_drive_setup #include "config.h" // CONFIG_* #include "fw/paravirt.h" // runningOnQEMU #include "malloc.h" // free #include "output.h" // dprintf #include "pcidevice.h" // foreachpci #include "pci_ids.h" // PCI_DEVICE_ID #include "pci_regs.h" // PCI_VENDOR_ID #include "stacks.h" // run_thread #include "std/disk.h" // DISK_RET_SUCCESS #include "string.h" // memset #include "util.h" // usleep #define MPT_REG_DOORBELL 0x00 #define MPT_REG_WRITE_SEQ 0x04 #define MPT_REG_HOST_DIAG 0x08 #define MPT_REG_TEST 0x0c #define MPT_REG_DIAG_DATA 0x10 #define MPT_REG_DIAG_ADDR 0x14 #define MPT_REG_ISTATUS 0x30 #define MPT_REG_IMASK 0x34 #define MPT_REG_REQ_Q 0x40 #define MPT_REG_REP_Q 0x44 #define MPT_DOORBELL_MSG_RESET 0x40 #define MPT_DOORBELL_HANDSHAKE 0x42 #define MPT_IMASK_DOORBELL 0x01 #define MPT_IMASK_REPLY 0x08 struct mpt_lun_s { struct drive_s drive; struct pci_device *pci; u32 iobase; u8 target; u8 lun; }; u8 reply_msg[4] __attribute((aligned(4))) VARLOW; #define MPT_MESSAGE_HDR_FUNCTION_SCSI_IO_REQUEST (0x00) #define MPT_MESSAGE_HDR_FUNCTION_IOC_INIT (0x02) static struct MptIOCInitRequest { u8 WhoInit; /* Which system sent this init request. */ u8 Reserved1; /* Reserved */ u8 ChainOffset; /* Chain offset in the SG list. */ u8 Function; /* Function to execute. */ u8 Flags; /* Flags */ u8 MaxDevices; /* Max devices the driver can handle. */ u8 MaxBuses; /* Max buses the driver can handle. */ u8 MessageFlags; /* Message flags. */ u32 MessageContext; /* Message context ID. */ u16 ReplyFrameSize; /* Reply frame size. */ u16 Reserved2; /* Reserved */ u32 HostMfaHighAddr; /* Upper 32bit of the message frames. */ u32 SenseBufferHighAddr; /* Upper 32bit of the sense buffer. */ } MptIOCInitRequest = { .WhoInit = 2, .Function = MPT_MESSAGE_HDR_FUNCTION_IOC_INIT, .MaxDevices = 8, .MaxBuses = 1, .ReplyFrameSize = sizeof(reply_msg), .HostMfaHighAddr = 0, .SenseBufferHighAddr = 0 }; struct MptIOCInitReply { u8 WhoInit; /* Which subsystem sent this init request. */ u8 Reserved1; /* Reserved */ u8 MessageLength; /* Message length */ u8 Function; /* Function. */ u8 Flags; /* Flags */ u8 MaxDevices; /* Maximum number of devices the driver can handle. */ u8 MaxBuses; /* Maximum number of busses the driver can handle. */ u8 MessageFlags; /* Message flags. */ u32 MessageContext; /* Message context ID */ u16 Reserved2; /* Reserved */ u16 IOCStatus; /* IO controller status. */ u32 IOCLogInfo; /* IO controller log information. */ }; typedef struct MptSCSIIORequest { u8 TargetID; /* Target ID */ u8 Bus; /* Bus number */ u8 ChainOffset; /* Chain offset */ u8 Function; /* Function number. */ u8 CDBLength; /* CDB length. */ u8 SenseBufferLength; /* Sense buffer length. */ u8 Reserved; /* Reserved */ u8 MessageFlags; /* Message flags. */ u32 MessageContext; /* Message context ID. */ u8 LUN[8]; /* LUN */ u32 Control; /* Control values. */ u8 CDB[16]; /* The CDB. */ u32 DataLength; /* Data length. */ u32 SenseBufferLowAddr; /* Sense buffer low 32bit address. */ } __attribute__((packed)) MptSCSIIORequest_t; #define MPT_POLL_TIMEOUT 60000 typedef struct MptSGEntrySimple32 { u32 FlagsLength; u32 DataBufferAddressLow; } __attribute__((packed)) MptSGEntrySimple32_t; static int mpt_scsi_cmd(u32 iobase, struct disk_op_s *op, u8 *cdb, u16 target, u16 lun, u16 blocksize) { u32 end = timer_calc(MPT_POLL_TIMEOUT); u8 sense_buf[18]; struct scsi_req { MptSCSIIORequest_t scsi_io; MptSGEntrySimple32_t sge; } __attribute__((packed, aligned(4))) req = { .scsi_io = { .TargetID = target, .Bus = 0, .Function = MPT_MESSAGE_HDR_FUNCTION_SCSI_IO_REQUEST, .CDBLength = 16, .SenseBufferLength = 18, .MessageContext = end & 0x7fffffff, .DataLength = op->count * blocksize, .SenseBufferLowAddr = (u32)MAKE_FLATPTR(GET_SEG(SS), &sense_buf[0]), }, .sge = { /* end of list, simple entry, end of buffer, last element */ .FlagsLength = (op->count * blocksize) | 0xD1000000, .DataBufferAddressLow = (u32)op->buf_fl, } }; req.scsi_io.LUN[1] = lun; memcpy(req.scsi_io.CDB, cdb, 16); if (blocksize) { if (scsi_is_read(op)) { req.scsi_io.Control = 2 << 24; } else { req.scsi_io.Control = 1 << 24; req.sge.FlagsLength |= 0x04000000; } } outl((u32)MAKE_FLATPTR(GET_SEG(SS), &req), iobase + MPT_REG_REQ_Q); for (;;) { if (timer_check(end)) { return DISK_RET_ETIMEOUT; } u32 istatus = inl(iobase + MPT_REG_ISTATUS); if (istatus & MPT_IMASK_REPLY) { u32 resp = inl(iobase + MPT_REG_REP_Q); /* another read to turn interrupt off */ inl(iobase + MPT_REG_REP_Q); if (resp == req.scsi_io.MessageContext) { return DISK_RET_SUCCESS; } else if (resp & 0x80000000) { outl((u32)&reply_msg[0], iobase + MPT_REG_REP_Q); return DISK_RET_EBADTRACK; } } usleep(50); } } int mpt_scsi_process_op(struct disk_op_s *op) { if (!CONFIG_MPT_SCSI) return DISK_RET_EBADTRACK; u8 cdbcmd[16]; int blocksize = scsi_fill_cmd(op, cdbcmd, sizeof(cdbcmd)); if (blocksize < 0) return default_process_op(op); struct mpt_lun_s *llun_gf = container_of(op->drive_fl, struct mpt_lun_s, drive); u16 target = GET_GLOBALFLAT(llun_gf->target); u16 lun = GET_GLOBALFLAT(llun_gf->lun); u32 iobase = GET_GLOBALFLAT(llun_gf->iobase); return mpt_scsi_cmd(iobase, op, cdbcmd, target, lun, blocksize); } static void mpt_scsi_init_lun(struct mpt_lun_s *llun, struct pci_device *pci, u32 iobase, u8 target, u8 lun) { memset(llun, 0, sizeof(*llun)); llun->drive.type = DTYPE_MPT_SCSI; llun->drive.cntl_id = pci->bdf; llun->pci = pci; llun->target = target; llun->lun = lun; llun->iobase = iobase; } static int mpt_scsi_add_lun(u32 lun, struct drive_s *tmpl_drv) { struct mpt_lun_s *tmpl_llun = container_of(tmpl_drv, struct mpt_lun_s, drive); struct mpt_lun_s *llun = malloc_fseg(sizeof(*llun)); if (!llun) { warn_noalloc(); return -1; } mpt_scsi_init_lun(llun, tmpl_llun->pci, tmpl_llun->iobase, tmpl_llun->target, lun); boot_lchs_find_scsi_device(llun->pci, llun->target, llun->lun, &(llun->drive.lchs)); char *name = znprintf(MAXDESCSIZE, "mpt %pP %d:%d", llun->pci, llun->target, llun->lun); int prio = bootprio_find_scsi_device(llun->pci, llun->target, llun->lun); int ret = scsi_drive_setup(&llun->drive, name, prio); free(name); if (ret) { goto fail; } return 0; fail: free(llun); return -1; } static void mpt_scsi_scan_target(struct pci_device *pci, u32 iobase, u8 target) { struct mpt_lun_s llun0; mpt_scsi_init_lun(&llun0, pci, iobase, target, 0); if (scsi_rep_luns_scan(&llun0.drive, mpt_scsi_add_lun) < 0) scsi_sequential_scan(&llun0.drive, 8, mpt_scsi_add_lun); } static inline void mpt_out_doorbell(u8 func, u8 arg, u16 iobase) { outl((func << 24) | (arg << 16), iobase + MPT_REG_DOORBELL); } static void init_mpt_scsi(void *data) { struct pci_device *pci = data; u16 *msg_in_p; u32 iobase = pci_enable_iobar(pci, PCI_BASE_ADDRESS_0); if (!iobase) return; struct MptIOCInitReply MptIOCInitReply; pci_enable_busmaster(pci); dprintf(1, "found mpt-scsi(%04x) at %pP, io @ %x\n" , pci->device, pci, iobase); // reset mpt_out_doorbell(MPT_DOORBELL_MSG_RESET, 0, iobase); outl(MPT_IMASK_DOORBELL|MPT_IMASK_REPLY , iobase + MPT_REG_IMASK); outl(0, iobase + MPT_REG_ISTATUS); // send IOC Init message through the doorbell mpt_out_doorbell(MPT_DOORBELL_HANDSHAKE, sizeof(MptIOCInitRequest)/sizeof(u32), iobase); outsl(iobase + MPT_REG_DOORBELL, (u32 *)&MptIOCInitRequest, sizeof(MptIOCInitRequest)/sizeof(u32)); // Read the reply 16 bits at a time. Cannot use insl // because the port is 32 bits wide. msg_in_p = (u16 *)&MptIOCInitReply; while(msg_in_p != (u16 *)(&MptIOCInitReply + 1)) *msg_in_p++ = (u16)inl(iobase + MPT_REG_DOORBELL); // Eat doorbell interrupt outl(0, iobase + MPT_REG_ISTATUS); // Post reply message used for SCSI errors outl((u32)&reply_msg[0], iobase + MPT_REG_REP_Q); int i; for (i = 0; i < 7; i++) mpt_scsi_scan_target(pci, iobase, i); } void mpt_scsi_setup(void) { ASSERT32FLAT(); if (!CONFIG_MPT_SCSI || !runningOnQEMU()) { return; } dprintf(3, "init MPT\n"); struct pci_device *pci; foreachpci(pci) { if (pci->vendor == PCI_VENDOR_ID_LSI_LOGIC && (pci->device == PCI_DEVICE_ID_LSI_53C1030 || pci->device == PCI_DEVICE_ID_LSI_SAS1068 || pci->device == PCI_DEVICE_ID_LSI_SAS1068E)) run_thread(init_mpt_scsi, pci); } }