[pxeprefix] Add .kkpxe image type and ability to return via PXE stack

Certain combinations of PXE stack and BIOS result in a broken INT 18
call, which will leave the system displaying a "PRESS ANY KEY TO
REBOOT" message instead of proceeding to the next boot device.  On
these systems, returning via the PXE stack is the only way to continue
to the next boot device.  Returning via the PXE stack works only if we
haven't already blown away the PXE base code in pxeprefix.S.

In most circumstances, we do want to blow away the PXE base code.
Base memory is a limited resource, and it is desirable to reclaim as
much as possible.  When we perform an iSCSI boot, we need to place the
iBFT above the 512kB mark, because otherwise it may not be detected by
the loaded OS; this may not be possible if the PXE base code is still
occupying that memory.

Introduce a new prefix type .kkpxe which will preserve both the PXE
base code and the UNDI driver (as compared to .kpxe, which preserves
the UNDI driver but uninstalls the PXE base code).  This prefix type
can be used on systems that are known to experience the specific
problem of INT 18 being broken, or in builds (such as gpxelinux.0) for
which it is particularly important to know that returning to the BIOS
will work.

Written by H. Peter Anvin <hpa@zytor.com> and Stefan Hajnoczi
<stefanha@gmail.com>, minor structural alterations by Michael Brown
<mcb30@etherboot.org>.

1 files changed, 62 insertions, 17 deletions

diff --git a/src/arch/i386/prefix/pxeprefix.S b/src/arch/i386/prefix/pxeprefix.S
index 575f4784..ee0f4d94 100644
--- a/src/arch/i386/prefix/pxeprefix.S
+++ b/src/arch/i386/prefix/pxeprefix.S
@@ -10,27 +10,45 @@
 
 #include <undi.h>
 
+#define STACK_MAGIC ( 'L' + ( 'R' << 8 ) + ( 'E' << 16 ) + ( 'T' << 24 ) )
+
 /*****************************************************************************
  * Entry point:	set operating context, print welcome message
  *****************************************************************************
  */
 	.section ".prefix", "ax", @progbits
-	/* Set up our non-stack segment registers */
 	jmp	$0x7c0, $1f
-1:	movw	%cs, %ax
+1:
+	/* Preserve registers for possible return to PXE */
+	pushfl
+	pushal
+	pushw	%gs
+	pushw	%fs
+	pushw	%es
+	pushw	%ds
+
+	/* Store magic word on PXE stack and remember PXE %ss:esp */
+	pushl	$STACK_MAGIC
+	movw	%ss, %cs:pxe_ss
+	movl	%esp, %cs:pxe_esp
+	movw	%sp, %bp
+	movl	(10*4+4*2+4)(%bp),%ebp	/* !PXE address */
+
+	/* Set up %ds */
+	movw	%cs, %ax
 	movw	%ax, %ds
-	movw	$0x40, %ax		/* BIOS data segment access */
-	movw	%ax, %fs
 	/* Record PXENV+ and !PXE nominal addresses */
-	movw	%es, %ax		/* PXENV+ address */
-	movw	%ax, pxenv_segment
+	movw	%es, pxenv_segment	/* PXENV+ address */
 	movw	%bx, pxenv_offset
-	popl	%eax			/* Discard return address */
-	popl	ppxe_segoff		/* !PXE address */
+	movl	%ebp, ppxe_segoff	/* !PXE address */
+	/* Set up %es and %fs */
+	movw	%ax, %es
+	movw	$0x40, %ax		/* BIOS data segment access */
+	movw	%ax, %fs
 	/* Set up stack just below 0x7c00 */
 	xorw	%ax, %ax
 	movw	%ax, %ss
-	movw	$0x7c00, %sp
+	movl	$0x7c00, %esp
 	/* Clear direction flag, for the sake of sanity */
 	cld
 	/* Print welcome message */
@@ -249,6 +267,7 @@ no_physical_device:
  * Leave NIC in a safe state
  *****************************************************************************
  */
+#ifndef PXELOADER_KEEP_PXE
 shutdown_nic:
 	/* Issue PXENV_UNDI_SHUTDOWN */
 	movw	$PXENV_UNDI_SHUTDOWN, %bx
@@ -256,11 +275,6 @@ shutdown_nic:
 	jnc	1f
 	call	print_pxe_error
 1:
-
-/*****************************************************************************
- * Unload PXE base code
- *****************************************************************************
- */	
 unload_base_code:
 	/* Issue PXENV_UNLOAD_STACK */
 	movw	$PXENV_UNLOAD_STACK, %bx
@@ -273,6 +287,8 @@ unload_base_code:
 	movw	%fs:(0x13), %bx
 	call	free_basemem
 99:
+	andw	$~( UNDI_FL_INITIALIZED | UNDI_FL_KEEP_ALL ), flags
+#endif /* PXELOADER_KEEP_PXE */
 
 /*****************************************************************************
  * Unload UNDI driver
@@ -511,6 +527,10 @@ print_pxe_error:
  * PXE data structures
  *****************************************************************************
  */
+	.section ".prefix.data"
+
+pxe_ss:			.word 0
+pxe_esp:		.long 0
 
 pxe_parameter_structure: .fill 20
 
@@ -547,14 +567,16 @@ isapnp_read_port:	.word UNDI_NO_ISAPNP_READ_PORT
 
 pci_vendor:		.word 0
 pci_device:		.word 0
-flags:			.word UNDI_FL_STARTED
+flags:
+	.word ( UNDI_FL_INITIALIZED | UNDI_FL_STARTED | UNDI_FL_KEEP_ALL )
 
 	.equ undi_device_size, ( . - undi_device )
 
 /*****************************************************************************
  * Run gPXE main code
  *****************************************************************************
- */	
+ */
+	.section ".prefix"
 run_gpxe:
 	/* Install gPXE */
 	call	install
@@ -572,6 +594,10 @@ run_gpxe:
 	rep movsb
 #endif
 
+	/* Retrieve PXE %ss:esp */
+	movw	pxe_ss,	%di
+	movl	pxe_esp, %ebp
+
 	/* Jump to .text16 segment with %ds pointing to .data16 */
 	movw	%bx, %ds
 	pushw	%ax
@@ -588,6 +614,25 @@ run_gpxe:
 	/* Uninstall gPXE */
 	call	uninstall
 
-	/* Boot next device */
+	/* Restore PXE stack */
+	movw	%di, %ss
+	movl	%ebp, %esp
+
+	/* Check PXE stack magic */
+	popl	%eax
+	cmpl	$STACK_MAGIC, %eax
+	jne	1f
+
+	/* PXE stack OK: return to caller */
+	popw	%ds
+	popw	%es
+	popw	%fs
+	popw	%gs
+	popal
+	popfl
+	xorw	%ax, %ax	/* Return success */
+	lret
+
+1:	/* PXE stack corrupt or removed: use INT 18 */
 	int	$0x18
 	.previous