diff options
| author | Biju Das <biju.das.jz@bp.renesas.com> | 2020-09-24 09:05:35 +0100 |
|---|---|---|
| committer | Geert Uytterhoeven <geert+renesas@glider.be> | 2020-09-25 09:26:36 +0200 |
| commit | 08d7a73fffb6769b1cf2278bf697e692daba3abf (patch) | |
| tree | b891dcaeb0ab0b58ba79751605a8da5ad7595f4e | |
| parent | 9123e3a74ec7b934a4a099e98af6a61c2f80bbf5 (diff) | |
| download | linux-08d7a73fffb6769b1cf2278bf697e692daba3abf.tar.gz | |
ARM: dts: iwg20d-q7-common: Fix touch controller probe failure
As per the iWave RZ/G1M schematic, the signal LVDS_PPEN controls the
supply voltage for the touch panel, LVDS receiver and RGB LCD panel. Add
a regulator for these device nodes and remove the powerdown-gpios
property from the lvds-receiver node as it results in a touch controller
driver probe failure.
Fixes: 6f89dd9e9325 ("ARM: dts: iwg20d-q7-common: Add LCD support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200924080535.3641-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| -rw-r--r-- | arch/arm/boot/dts/iwg20d-q7-common.dtsi | 15 |
1 files changed, 14 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/iwg20d-q7-common.dtsi b/arch/arm/boot/dts/iwg20d-q7-common.dtsi index ebbe1518ef8a..63cafd220dba 100644 --- a/arch/arm/boot/dts/iwg20d-q7-common.dtsi +++ b/arch/arm/boot/dts/iwg20d-q7-common.dtsi @@ -57,7 +57,7 @@ lvds-receiver { compatible = "ti,ds90cf384a", "lvds-decoder"; - powerdown-gpios = <&gpio7 25 GPIO_ACTIVE_LOW>; + power-supply = <&vcc_3v3_tft1>; ports { #address-cells = <1>; @@ -81,6 +81,7 @@ panel { compatible = "edt,etm0700g0dh6"; backlight = <&lcd_backlight>; + power-supply = <&vcc_3v3_tft1>; port { panel_in: endpoint { @@ -113,6 +114,17 @@ }; }; + vcc_3v3_tft1: regulator-panel { + compatible = "regulator-fixed"; + + regulator-name = "vcc-3v3-tft1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + startup-delay-us = <500>; + gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>; + }; + vcc_sdhi1: regulator-vcc-sdhi1 { compatible = "regulator-fixed"; @@ -207,6 +219,7 @@ reg = <0x38>; interrupt-parent = <&gpio2>; interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + vcc-supply = <&vcc_3v3_tft1>; }; }; |