Merge remote-tracking branch 'pfdo/drm-next' into drm-next

Pull in drm-next for the object find API changes.

Fix the one place the API crashes.

Signed-off-by: Dave Airlie <airlied@redhat.com>

4 files changed, 105 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 06668bca7ffc..0047b1394c70 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -68,6 +68,8 @@ Optional properties:
 - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
   generator. The chip will rely on the sync signals in the DSI data lanes,
   rather than generate its own timings for HDMI output.
+- clocks: from common clock binding: reference to the CEC clock.
+- clock-names: from common clock binding: must be "cec".
 
 Required nodes:
 
@@ -89,6 +91,8 @@ Example
 		reg = <39>;
 		interrupt-parent = <&gpio3>;
 		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+		clocks = <&cec_clock>;
+		clock-names = "cec";
 
 		adi,input-depth = <8>;
 		adi,input-colorspace = "rgb";
diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
new file mode 100644
index 000000000000..88041ba23d56
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
@@ -0,0 +1,49 @@
+Silicon Image SiI9234 HDMI/MHL bridge bindings
+
+Required properties:
+	- compatible : "sil,sii9234".
+	- reg : I2C address for TPI interface, use 0x39
+	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
+	- iovcc18-supply : I/O Supply Voltage (1.8V)
+	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
+	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
+	- interrupts, interrupt-parent: interrupt specifier of INT pin
+	- reset-gpios: gpio specifier of RESET pin (active low)
+	- video interfaces: Device node can contain two video interface port
+			    nodes for HDMI encoder and connector according to [1].
+			    - port@0 - MHL to HDMI
+			    - port@1 - MHL to connector
+
+[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
+
+
+Example:
+	sii9234@39 {
+		compatible = "sil,sii9234";
+		reg = <0x39>;
+		avcc33-supply = <&vcc33mhl>;
+		iovcc18-supply = <&vcc18mhl>;
+		avcc12-supply = <&vsil12>;
+		cvcc12-supply = <&vsil12>;
+		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpf3>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				mhl_to_hdmi: endpoint {
+					remote-endpoint = <&hdmi_to_mhl>;
+				};
+			};
+			port@1 {
+				reg = <1>;
+				mhl_to_connector: endpoint {
+					remote-endpoint = <&connector_to_mhl>;
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt
new file mode 100644
index 000000000000..e9e19c059260
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt
@@ -0,0 +1,49 @@
+This binding covers the official 7" (800x480) Raspberry Pi touchscreen
+panel.
+
+This DSI panel contains:
+
+- TC358762 DSI->DPI bridge
+- Atmel microcontroller on I2C for power sequencing the DSI bridge and
+  controlling backlight
+- Touchscreen controller on I2C for touch input
+
+and this binding covers the DSI display parts but not its touch input.
+
+Required properties:
+- compatible:	Must be "raspberrypi,7inch-touchscreen-panel"
+- reg:		Must be "45"
+- port:		See panel-common.txt
+
+Example:
+
+dsi1: dsi@7e700000 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	<...>
+
+	port {
+		dsi_out_port: endpoint {
+			remote-endpoint = <&panel_dsi_port>;
+		};
+	};
+};
+
+i2c_dsi: i2c {
+	compatible = "i2c-gpio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	gpios = <&gpio 28 0
+		 &gpio 29 0>;
+
+	lcd@45 {
+		compatible = "raspberrypi,7inch-touchscreen-panel";
+		reg = <0x45>;
+
+		port {
+			panel_dsi_port: endpoint {
+				remote-endpoint = <&dsi_out_port>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index 92441086caba..46df3b78ae9e 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -41,14 +41,17 @@ CEC. It is one end of the pipeline.
 Required properties:
   - compatible: value must be one of:
     * allwinner,sun5i-a10s-hdmi
+    * allwinner,sun6i-a31-hdmi
   - reg: base address and size of memory-mapped region
   - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the HDMI encoder
     * ahb: the HDMI interface clock
     * mod: the HDMI module clock
+    * ddc: the HDMI ddc clock (A31 only)
     * pll-0: the first video PLL
     * pll-1: the second video PLL
   - clock-names: the clock names mentioned above
+  - resets: phandle to the reset control for the HDMI encoder (A31 only)
   - dmas: phandles to the DMA channels used by the HDMI encoder
     * ddc-tx: The channel for DDC transmission
     * ddc-rx: The channel for DDC reception