cfg80211: remove enum ieee80211_band

This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

3 files changed, 9 insertions, 9 deletions

diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index a27279c2c695..9a1db3bbec4e 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -26,14 +26,14 @@ module_param_named(debug_mask, wcn36xx_dbg_mask, uint, 0644);
 MODULE_PARM_DESC(debug_mask, "Debugging mask");
 
 #define CHAN2G(_freq, _idx) { \
-	.band = IEEE80211_BAND_2GHZ, \
+	.band = NL80211_BAND_2GHZ, \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
 	.max_power = 25, \
 }
 
 #define CHAN5G(_freq, _idx) { \
-	.band = IEEE80211_BAND_5GHZ, \
+	.band = NL80211_BAND_5GHZ, \
 	.center_freq = (_freq), \
 	.hw_value = (_idx), \
 	.max_power = 25, \
@@ -516,7 +516,7 @@ static void wcn36xx_sw_scan_complete(struct ieee80211_hw *hw,
 }
 
 static void wcn36xx_update_allowed_rates(struct ieee80211_sta *sta,
-					 enum ieee80211_band band)
+					 enum nl80211_band band)
 {
 	int i, size;
 	u16 *rates_table;
@@ -529,7 +529,7 @@ static void wcn36xx_update_allowed_rates(struct ieee80211_sta *sta,
 
 	size = ARRAY_SIZE(sta_priv->supported_rates.dsss_rates);
 	rates_table = sta_priv->supported_rates.dsss_rates;
-	if (band == IEEE80211_BAND_2GHZ) {
+	if (band == NL80211_BAND_2GHZ) {
 		for (i = 0; i < size; i++) {
 			if (rates & 0x01) {
 				rates_table[i] = wcn_2ghz_rates[i].hw_value;
@@ -958,8 +958,8 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn)
 		BIT(NL80211_IFTYPE_ADHOC) |
 		BIT(NL80211_IFTYPE_MESH_POINT);
 
-	wcn->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wcn_band_2ghz;
-	wcn->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wcn_band_5ghz;
+	wcn->hw->wiphy->bands[NL80211_BAND_2GHZ] = &wcn_band_2ghz;
+	wcn->hw->wiphy->bands[NL80211_BAND_5GHZ] = &wcn_band_5ghz;
 
 	wcn->hw->wiphy->cipher_suites = cipher_suites;
 	wcn->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 74f56a81ad9a..96992a2c4b42 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -104,11 +104,11 @@ static void wcn36xx_smd_set_bss_nw_type(struct wcn36xx *wcn,
 		struct ieee80211_sta *sta,
 		struct wcn36xx_hal_config_bss_params *bss_params)
 {
-	if (IEEE80211_BAND_5GHZ == WCN36XX_BAND(wcn))
+	if (NL80211_BAND_5GHZ == WCN36XX_BAND(wcn))
 		bss_params->nw_type = WCN36XX_HAL_11A_NW_TYPE;
 	else if (sta && sta->ht_cap.ht_supported)
 		bss_params->nw_type = WCN36XX_HAL_11N_NW_TYPE;
-	else if (sta && (sta->supp_rates[IEEE80211_BAND_2GHZ] & 0x7f))
+	else if (sta && (sta->supp_rates[NL80211_BAND_2GHZ] & 0x7f))
 		bss_params->nw_type = WCN36XX_HAL_11G_NW_TYPE;
 	else
 		bss_params->nw_type = WCN36XX_HAL_11B_NW_TYPE;
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index 99c21aac68bd..6c47a7336c38 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -225,7 +225,7 @@ static void wcn36xx_set_tx_mgmt(struct wcn36xx_tx_bd *bd,
 
 	/* default rate for unicast */
 	if (ieee80211_is_mgmt(hdr->frame_control))
-		bd->bd_rate = (WCN36XX_BAND(wcn) == IEEE80211_BAND_5GHZ) ?
+		bd->bd_rate = (WCN36XX_BAND(wcn) == NL80211_BAND_5GHZ) ?
 			WCN36XX_BD_RATE_CTRL :
 			WCN36XX_BD_RATE_MGMT;
 	else if (ieee80211_is_ctl(hdr->frame_control))