Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

19 files changed, 122 insertions, 165 deletions

diff --git a/drivers/net/wireless/intersil/Kconfig b/drivers/net/wireless/intersil/Kconfig
index 6a6ce9d4aeee..c52d9b535623 100644
--- a/drivers/net/wireless/intersil/Kconfig
+++ b/drivers/net/wireless/intersil/Kconfig
@@ -30,7 +30,7 @@ config PRISM54
 
 	  For more information refer to the p54 wiki:
 
-	  http://wireless.kernel.org/en/users/Drivers/p54
+	  http://wireless.wiki.kernel.org/en/users/Drivers/p54
 
 	  Note: You need a motherboard with DMA support to use any of these cards
 
diff --git a/drivers/net/wireless/intersil/hostap/hostap_hw.c b/drivers/net/wireless/intersil/hostap/hostap_hw.c
index 2ab34cf74ecc..b6c497ce12e1 100644
--- a/drivers/net/wireless/intersil/hostap/hostap_hw.c
+++ b/drivers/net/wireless/intersil/hostap/hostap_hw.c
@@ -3366,8 +3366,8 @@ static void prism2_free_local_data(struct net_device *dev)
 }
 
 
-#if (defined(PRISM2_PCI) && defined(CONFIG_PM)) || defined(PRISM2_PCCARD)
-static void prism2_suspend(struct net_device *dev)
+#if defined(PRISM2_PCI) || defined(PRISM2_PCCARD)
+static void __maybe_unused prism2_suspend(struct net_device *dev)
 {
 	struct hostap_interface *iface;
 	struct local_info *local;
@@ -3385,7 +3385,7 @@ static void prism2_suspend(struct net_device *dev)
 	/* Disable hardware and firmware */
 	prism2_hw_shutdown(dev, 0);
 }
-#endif /* (PRISM2_PCI && CONFIG_PM) || PRISM2_PCCARD */
+#endif /* PRISM2_PCI || PRISM2_PCCARD */
 
 
 /* These might at some point be compiled separately and used as separate
diff --git a/drivers/net/wireless/intersil/hostap/hostap_pci.c b/drivers/net/wireless/intersil/hostap/hostap_pci.c
index 0c2aa880e32a..101887e6bd0f 100644
--- a/drivers/net/wireless/intersil/hostap/hostap_pci.c
+++ b/drivers/net/wireless/intersil/hostap/hostap_pci.c
@@ -403,36 +403,23 @@ static void prism2_pci_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-
-#ifdef CONFIG_PM
-static int prism2_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused prism2_pci_suspend(struct device *dev_d)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
+	struct net_device *dev = dev_get_drvdata(dev_d);
 
 	if (netif_running(dev)) {
 		netif_stop_queue(dev);
 		netif_device_detach(dev);
 	}
 	prism2_suspend(dev);
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;
 }
 
-static int prism2_pci_resume(struct pci_dev *pdev)
+static int __maybe_unused prism2_pci_resume(struct device *dev_d)
 {
-	struct net_device *dev = pci_get_drvdata(pdev);
-	int err;
-
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
-		       dev->name);
-		return err;
-	}
-	pci_restore_state(pdev);
+	struct net_device *dev = dev_get_drvdata(dev_d);
+
 	prism2_hw_config(dev, 0);
 	if (netif_running(dev)) {
 		netif_device_attach(dev);
@@ -441,20 +428,19 @@ static int prism2_pci_resume(struct pci_dev *pdev)
 
 	return 0;
 }
-#endif /* CONFIG_PM */
-
 
 MODULE_DEVICE_TABLE(pci, prism2_pci_id_table);
 
+static SIMPLE_DEV_PM_OPS(prism2_pci_pm_ops,
+			 prism2_pci_suspend,
+			 prism2_pci_resume);
+
 static struct pci_driver prism2_pci_driver = {
 	.name		= "hostap_pci",
 	.id_table	= prism2_pci_id_table,
 	.probe		= prism2_pci_probe,
 	.remove		= prism2_pci_remove,
-#ifdef CONFIG_PM
-	.suspend	= prism2_pci_suspend,
-	.resume		= prism2_pci_resume,
-#endif /* CONFIG_PM */
+	.driver.pm	= &prism2_pci_pm_ops,
 };
 
 module_pci_driver(prism2_pci_driver);
diff --git a/drivers/net/wireless/intersil/orinoco/Kconfig b/drivers/net/wireless/intersil/orinoco/Kconfig
index c470ee23673f..f62730aa7be3 100644
--- a/drivers/net/wireless/intersil/orinoco/Kconfig
+++ b/drivers/net/wireless/intersil/orinoco/Kconfig
@@ -27,7 +27,7 @@ config HERMES
 
 	  You will also very likely also need the Wireless Tools in order to
 	  configure your card and that /etc/pcmcia/wireless.opts works :
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
 
 config HERMES_PRISM
 	bool "Support Prism 2/2.5 chipset"
@@ -120,7 +120,7 @@ config PCMCIA_HERMES
 
 	  You will very likely need the Wireless Tools in order to
 	  configure your card and that /etc/pcmcia/wireless.opts works:
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+	  <https://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
 
 config PCMCIA_SPECTRUM
 	tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c b/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c
index 048693b6c6c2..96a03d10a080 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_nortel.c
@@ -290,8 +290,7 @@ static struct pci_driver orinoco_nortel_driver = {
 	.id_table	= orinoco_nortel_id_table,
 	.probe		= orinoco_nortel_init_one,
 	.remove		= orinoco_nortel_remove_one,
-	.suspend	= orinoco_pci_suspend,
-	.resume		= orinoco_pci_resume,
+	.driver.pm	= &orinoco_pci_pm_ops,
 };
 
 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c
index 4938a2208a37..f3c86b07b1b9 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_pci.c
@@ -230,8 +230,7 @@ static struct pci_driver orinoco_pci_driver = {
 	.id_table	= orinoco_pci_id_table,
 	.probe		= orinoco_pci_init_one,
 	.remove		= orinoco_pci_remove_one,
-	.suspend	= orinoco_pci_suspend,
-	.resume		= orinoco_pci_resume,
+	.driver.pm	= &orinoco_pci_pm_ops,
 };
 
 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h b/drivers/net/wireless/intersil/orinoco/orinoco_pci.h
index 43f5b9f5a0b0..d49d940864b4 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_pci.h
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_pci.h
@@ -18,51 +18,37 @@ struct orinoco_pci_card {
 	void __iomem *attr_io;
 };
 
-#ifdef CONFIG_PM
-static int orinoco_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused orinoco_pci_suspend(struct device *dev_d)
 {
+	struct pci_dev *pdev = to_pci_dev(dev_d);
 	struct orinoco_private *priv = pci_get_drvdata(pdev);
 
 	orinoco_down(priv);
 	free_irq(pdev->irq, priv);
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
 
 	return 0;
 }
 
-static int orinoco_pci_resume(struct pci_dev *pdev)
+static int __maybe_unused orinoco_pci_resume(struct device *dev_d)
 {
+	struct pci_dev *pdev = to_pci_dev(dev_d);
 	struct orinoco_private *priv = pci_get_drvdata(pdev);
 	struct net_device *dev = priv->ndev;
 	int err;
 
-	pci_set_power_state(pdev, PCI_D0);
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
-		       dev->name);
-		return err;
-	}
-	pci_restore_state(pdev);
-
 	err = request_irq(pdev->irq, orinoco_interrupt, IRQF_SHARED,
 			  dev->name, priv);
 	if (err) {
 		printk(KERN_ERR "%s: cannot re-allocate IRQ on resume\n",
 		       dev->name);
-		pci_disable_device(pdev);
 		return -EBUSY;
 	}
 
-	err = orinoco_up(priv);
-
-	return err;
+	return orinoco_up(priv);
 }
-#else
-#define orinoco_pci_suspend NULL
-#define orinoco_pci_resume NULL
-#endif
+
+static SIMPLE_DEV_PM_OPS(orinoco_pci_pm_ops,
+			 orinoco_pci_suspend,
+			 orinoco_pci_resume);
 
 #endif /* _ORINOCO_PCI_H */
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c b/drivers/net/wireless/intersil/orinoco/orinoco_plx.c
index 221352027779..16dada94c774 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_plx.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_plx.c
@@ -336,8 +336,7 @@ static struct pci_driver orinoco_plx_driver = {
 	.id_table	= orinoco_plx_id_table,
 	.probe		= orinoco_plx_init_one,
 	.remove		= orinoco_plx_remove_one,
-	.suspend	= orinoco_pci_suspend,
-	.resume		= orinoco_pci_resume,
+	.driver.pm	= &orinoco_pci_pm_ops,
 };
 
 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
index 20ce569b8a43..9a9d335611ac 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_tmd.c
@@ -213,8 +213,7 @@ static struct pci_driver orinoco_tmd_driver = {
 	.id_table	= orinoco_tmd_id_table,
 	.probe		= orinoco_tmd_init_one,
 	.remove		= orinoco_tmd_remove_one,
-	.suspend	= orinoco_pci_suspend,
-	.resume		= orinoco_pci_resume,
+	.driver.pm	= &orinoco_pci_pm_ops,
 };
 
 static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
diff --git a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
index 651c676b5506..11fa38fedd87 100644
--- a/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
+++ b/drivers/net/wireless/intersil/orinoco/orinoco_usb.c
@@ -158,7 +158,7 @@ MODULE_FIRMWARE("orinoco_ezusb_fw");
 
 
 #define EZUSB_REQUEST_FW_TRANS		0xA0
-#define EZUSB_REQUEST_TRIGER		0xAA
+#define EZUSB_REQUEST_TRIGGER		0xAA
 #define EZUSB_REQUEST_TRIG_AC		0xAC
 #define EZUSB_CPUCS_REG			0x7F92
 
@@ -1318,12 +1318,12 @@ static int ezusb_hard_reset(struct orinoco_private *priv)
 	netdev_dbg(upriv->dev, "sending control message\n");
 	retval = usb_control_msg(upriv->udev,
 				 usb_sndctrlpipe(upriv->udev, 0),
-				 EZUSB_REQUEST_TRIGER,
+				 EZUSB_REQUEST_TRIGGER,
 				 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
 				 USB_DIR_OUT, 0x0, 0x0, NULL, 0,
 				 DEF_TIMEOUT);
 	if (retval < 0) {
-		err("EZUSB_REQUEST_TRIGER failed retval %d", retval);
+		err("EZUSB_REQUEST_TRIGGER failed retval %d", retval);
 		return retval;
 	}
 #if 0
diff --git a/drivers/net/wireless/intersil/p54/Kconfig b/drivers/net/wireless/intersil/p54/Kconfig
index 024be5507daf..003c378ed131 100644
--- a/drivers/net/wireless/intersil/p54/Kconfig
+++ b/drivers/net/wireless/intersil/p54/Kconfig
@@ -10,7 +10,7 @@ config P54_COMMON
 	  also need to be enabled in order to support any devices.
 
 	  These devices require softmac firmware which can be found at
-	  <http://wireless.kernel.org/en/users/Drivers/p54>
+	  <http://wireless.wiki.kernel.org/en/users/Drivers/p54>
 
 	  If you choose to build a module, it'll be called p54common.
 
@@ -22,7 +22,7 @@ config P54_USB
 	  This driver is for USB isl38xx based wireless cards.
 
 	  These devices require softmac firmware which can be found at
-	  <http://wireless.kernel.org/en/users/Drivers/p54>
+	  <http://wireless.wiki.kernel.org/en/users/Drivers/p54>
 
 	  If you choose to build a module, it'll be called p54usb.
 
@@ -36,7 +36,7 @@ config P54_PCI
 	  supported by the fullmac driver/firmware.
 
 	  This driver requires softmac firmware which can be found at
-	  <http://wireless.kernel.org/en/users/Drivers/p54>
+	  <http://wireless.wiki.kernel.org/en/users/Drivers/p54>
 
 	  If you choose to build a module, it'll be called p54pci.
 
diff --git a/drivers/net/wireless/intersil/p54/fwio.c b/drivers/net/wireless/intersil/p54/fwio.c
index a5afcc865196..bece14e4ff0d 100644
--- a/drivers/net/wireless/intersil/p54/fwio.c
+++ b/drivers/net/wireless/intersil/p54/fwio.c
@@ -132,7 +132,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)
 	if (priv->fw_var < 0x500)
 		wiphy_info(priv->hw->wiphy,
 			   "you are using an obsolete firmware. "
-			   "visit http://wireless.kernel.org/en/users/Drivers/p54 "
+			   "visit http://wireless.wiki.kernel.org/en/users/Drivers/p54 "
 			   "and grab one for \"kernel >= 2.6.28\"!\n");
 
 	if (priv->fw_var >= 0x300) {
diff --git a/drivers/net/wireless/intersil/p54/p54pci.c b/drivers/net/wireless/intersil/p54/p54pci.c
index 80ad0b7eaef4..9d96c8b8409d 100644
--- a/drivers/net/wireless/intersil/p54/p54pci.c
+++ b/drivers/net/wireless/intersil/p54/p54pci.c
@@ -153,12 +153,12 @@ static void p54p_refill_rx_ring(struct ieee80211_hw *dev,
 			if (!skb)
 				break;
 
-			mapping = pci_map_single(priv->pdev,
+			mapping = dma_map_single(&priv->pdev->dev,
 						 skb_tail_pointer(skb),
 						 priv->common.rx_mtu + 32,
-						 PCI_DMA_FROMDEVICE);
+						 DMA_FROM_DEVICE);
 
-			if (pci_dma_mapping_error(priv->pdev, mapping)) {
+			if (dma_mapping_error(&priv->pdev->dev, mapping)) {
 				dev_kfree_skb_any(skb);
 				dev_err(&priv->pdev->dev,
 					"RX DMA Mapping error\n");
@@ -215,19 +215,22 @@ static void p54p_check_rx_ring(struct ieee80211_hw *dev, u32 *index,
 			len = priv->common.rx_mtu;
 		}
 		dma_addr = le32_to_cpu(desc->host_addr);
-		pci_dma_sync_single_for_cpu(priv->pdev, dma_addr,
-			priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
+		dma_sync_single_for_cpu(&priv->pdev->dev, dma_addr,
+					priv->common.rx_mtu + 32,
+					DMA_FROM_DEVICE);
 		skb_put(skb, len);
 
 		if (p54_rx(dev, skb)) {
-			pci_unmap_single(priv->pdev, dma_addr,
-				priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
+			dma_unmap_single(&priv->pdev->dev, dma_addr,
+					 priv->common.rx_mtu + 32,
+					 DMA_FROM_DEVICE);
 			rx_buf[i] = NULL;
 			desc->host_addr = cpu_to_le32(0);
 		} else {
 			skb_trim(skb, 0);
-			pci_dma_sync_single_for_device(priv->pdev, dma_addr,
-				priv->common.rx_mtu + 32, PCI_DMA_FROMDEVICE);
+			dma_sync_single_for_device(&priv->pdev->dev, dma_addr,
+						   priv->common.rx_mtu + 32,
+						   DMA_FROM_DEVICE);
 			desc->len = cpu_to_le16(priv->common.rx_mtu + 32);
 		}
 
@@ -258,8 +261,9 @@ static void p54p_check_tx_ring(struct ieee80211_hw *dev, u32 *index,
 		skb = tx_buf[i];
 		tx_buf[i] = NULL;
 
-		pci_unmap_single(priv->pdev, le32_to_cpu(desc->host_addr),
-				 le16_to_cpu(desc->len), PCI_DMA_TODEVICE);
+		dma_unmap_single(&priv->pdev->dev,
+				 le32_to_cpu(desc->host_addr),
+				 le16_to_cpu(desc->len), DMA_TO_DEVICE);
 
 		desc->host_addr = 0;
 		desc->device_addr = 0;
@@ -334,9 +338,9 @@ static void p54p_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
 	idx = le32_to_cpu(ring_control->host_idx[1]);
 	i = idx % ARRAY_SIZE(ring_control->tx_data);
 
-	mapping = pci_map_single(priv->pdev, skb->data, skb->len,
-				 PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(priv->pdev, mapping)) {
+	mapping = dma_map_single(&priv->pdev->dev, skb->data, skb->len,
+				 DMA_TO_DEVICE);
+	if (dma_mapping_error(&priv->pdev->dev, mapping)) {
 		spin_unlock_irqrestore(&priv->lock, flags);
 		p54_free_skb(dev, skb);
 		dev_err(&priv->pdev->dev, "TX DMA mapping error\n");
@@ -378,10 +382,10 @@ static void p54p_stop(struct ieee80211_hw *dev)
 	for (i = 0; i < ARRAY_SIZE(priv->rx_buf_data); i++) {
 		desc = &ring_control->rx_data[i];
 		if (desc->host_addr)
-			pci_unmap_single(priv->pdev,
+			dma_unmap_single(&priv->pdev->dev,
 					 le32_to_cpu(desc->host_addr),
 					 priv->common.rx_mtu + 32,
-					 PCI_DMA_FROMDEVICE);
+					 DMA_FROM_DEVICE);
 		kfree_skb(priv->rx_buf_data[i]);
 		priv->rx_buf_data[i] = NULL;
 	}
@@ -389,10 +393,10 @@ static void p54p_stop(struct ieee80211_hw *dev)
 	for (i = 0; i < ARRAY_SIZE(priv->rx_buf_mgmt); i++) {
 		desc = &ring_control->rx_mgmt[i];
 		if (desc->host_addr)
-			pci_unmap_single(priv->pdev,
+			dma_unmap_single(&priv->pdev->dev,
 					 le32_to_cpu(desc->host_addr),
 					 priv->common.rx_mtu + 32,
-					 PCI_DMA_FROMDEVICE);
+					 DMA_FROM_DEVICE);
 		kfree_skb(priv->rx_buf_mgmt[i]);
 		priv->rx_buf_mgmt[i] = NULL;
 	}
@@ -400,10 +404,10 @@ static void p54p_stop(struct ieee80211_hw *dev)
 	for (i = 0; i < ARRAY_SIZE(priv->tx_buf_data); i++) {
 		desc = &ring_control->tx_data[i];
 		if (desc->host_addr)
-			pci_unmap_single(priv->pdev,
+			dma_unmap_single(&priv->pdev->dev,
 					 le32_to_cpu(desc->host_addr),
 					 le16_to_cpu(desc->len),
-					 PCI_DMA_TODEVICE);
+					 DMA_TO_DEVICE);
 
 		p54_free_skb(dev, priv->tx_buf_data[i]);
 		priv->tx_buf_data[i] = NULL;
@@ -412,10 +416,10 @@ static void p54p_stop(struct ieee80211_hw *dev)
 	for (i = 0; i < ARRAY_SIZE(priv->tx_buf_mgmt); i++) {
 		desc = &ring_control->tx_mgmt[i];
 		if (desc->host_addr)
-			pci_unmap_single(priv->pdev,
+			dma_unmap_single(&priv->pdev->dev,
 					 le32_to_cpu(desc->host_addr),
 					 le16_to_cpu(desc->len),
-					 PCI_DMA_TODEVICE);
+					 DMA_TO_DEVICE);
 
 		p54_free_skb(dev, priv->tx_buf_mgmt[i]);
 		priv->tx_buf_mgmt[i] = NULL;
@@ -568,9 +572,9 @@ static int p54p_probe(struct pci_dev *pdev,
 		goto err_disable_dev;
 	}
 
-	err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+	err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (!err)
-		err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 	if (err) {
 		dev_err(&pdev->dev, "No suitable DMA available\n");
 		goto err_free_reg;
@@ -603,8 +607,9 @@ static int p54p_probe(struct pci_dev *pdev,
 		goto err_free_dev;
 	}
 
-	priv->ring_control = pci_alloc_consistent(pdev, sizeof(*priv->ring_control),
-						  &priv->ring_control_dma);
+	priv->ring_control = dma_alloc_coherent(&pdev->dev,
+						sizeof(*priv->ring_control),
+						&priv->ring_control_dma, GFP_KERNEL);
 	if (!priv->ring_control) {
 		dev_err(&pdev->dev, "Cannot allocate rings\n");
 		err = -ENOMEM;
@@ -623,8 +628,8 @@ static int p54p_probe(struct pci_dev *pdev,
 	if (!err)
 		return 0;
 
-	pci_free_consistent(pdev, sizeof(*priv->ring_control),
-			    priv->ring_control, priv->ring_control_dma);
+	dma_free_coherent(&pdev->dev, sizeof(*priv->ring_control),
+			  priv->ring_control, priv->ring_control_dma);
 
  err_iounmap:
 	iounmap(priv->map);
@@ -653,8 +658,8 @@ static void p54p_remove(struct pci_dev *pdev)
 	wait_for_completion(&priv->fw_loaded);
 	p54_unregister_common(dev);
 	release_firmware(priv->firmware);
-	pci_free_consistent(pdev, sizeof(*priv->ring_control),
-			    priv->ring_control, priv->ring_control_dma);
+	dma_free_coherent(&pdev->dev, sizeof(*priv->ring_control),
+			  priv->ring_control, priv->ring_control_dma);
 	iounmap(priv->map);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);
diff --git a/drivers/net/wireless/intersil/p54/p54usb.c b/drivers/net/wireless/intersil/p54/p54usb.c
index ff0e30c0c14c..cae47663b17b 100644
--- a/drivers/net/wireless/intersil/p54/p54usb.c
+++ b/drivers/net/wireless/intersil/p54/p54usb.c
@@ -36,7 +36,7 @@ static struct usb_driver p54u_driver;
  * Note:
  *
  * Always update our wiki's device list (located at:
- * http://wireless.kernel.org/en/users/Drivers/p54/devices ),
+ * http://wireless.wiki.kernel.org/en/users/Drivers/p54/devices ),
  * whenever you add a new device.
  */
 
diff --git a/drivers/net/wireless/intersil/prism54/isl_oid.h b/drivers/net/wireless/intersil/prism54/isl_oid.h
index 1afc2ccf94ca..b889bb73a485 100644
--- a/drivers/net/wireless/intersil/prism54/isl_oid.h
+++ b/drivers/net/wireless/intersil/prism54/isl_oid.h
@@ -143,7 +143,7 @@ enum dot11_priv_t {
  * together with a CSMA contention. Without this all frames are
  * sent with a CSMA contention.
  * Bibliography:
- * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html
+ * https://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html
  */
 enum dot11_maxframeburst_t {
 	/* Values for DOT11_OID_MAXFRAMEBURST */
diff --git a/drivers/net/wireless/intersil/prism54/islpci_dev.c b/drivers/net/wireless/intersil/prism54/islpci_dev.c
index a9bae69222dc..efd64e555bb5 100644
--- a/drivers/net/wireless/intersil/prism54/islpci_dev.c
+++ b/drivers/net/wireless/intersil/prism54/islpci_dev.c
@@ -636,10 +636,10 @@ islpci_alloc_memory(islpci_private *priv)
 	 */
 
 	/* perform the allocation */
-	priv->driver_mem_address = pci_alloc_consistent(priv->pdev,
-							HOST_MEM_BLOCK,
-							&priv->
-							device_host_address);
+	priv->driver_mem_address = dma_alloc_coherent(&priv->pdev->dev,
+						      HOST_MEM_BLOCK,
+						      &priv->device_host_address,
+						      GFP_KERNEL);
 
 	if (!priv->driver_mem_address) {
 		/* error allocating the block of PCI memory */
@@ -692,11 +692,9 @@ islpci_alloc_memory(islpci_private *priv)
 
 		/* map the allocated skb data area to pci */
 		priv->pci_map_rx_address[counter] =
-		    pci_map_single(priv->pdev, (void *) skb->data,
-				   MAX_FRAGMENT_SIZE_RX + 2,
-				   PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(priv->pdev,
-					  priv->pci_map_rx_address[counter])) {
+		    dma_map_single(&priv->pdev->dev, (void *)skb->data,
+				   MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
+		if (dma_mapping_error(&priv->pdev->dev, priv->pci_map_rx_address[counter])) {
 			priv->pci_map_rx_address[counter] = 0;
 			/* error mapping the buffer to device
 			   accessible memory address */
@@ -727,9 +725,9 @@ islpci_free_memory(islpci_private *priv)
 
 	/* free consistent DMA area... */
 	if (priv->driver_mem_address)
-		pci_free_consistent(priv->pdev, HOST_MEM_BLOCK,
-				    priv->driver_mem_address,
-				    priv->device_host_address);
+		dma_free_coherent(&priv->pdev->dev, HOST_MEM_BLOCK,
+				  priv->driver_mem_address,
+				  priv->device_host_address);
 
 	/* clear some dangling pointers */
 	priv->driver_mem_address = NULL;
@@ -741,8 +739,8 @@ islpci_free_memory(islpci_private *priv)
         for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
 		struct islpci_membuf *buf = &priv->mgmt_rx[counter];
 		if (buf->pci_addr)
-			pci_unmap_single(priv->pdev, buf->pci_addr,
-					 buf->size, PCI_DMA_FROMDEVICE);
+			dma_unmap_single(&priv->pdev->dev, buf->pci_addr,
+					 buf->size, DMA_FROM_DEVICE);
 		buf->pci_addr = 0;
 		kfree(buf->mem);
 		buf->size = 0;
@@ -752,10 +750,10 @@ islpci_free_memory(islpci_private *priv)
 	/* clean up data rx buffers */
 	for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
 		if (priv->pci_map_rx_address[counter])
-			pci_unmap_single(priv->pdev,
+			dma_unmap_single(&priv->pdev->dev,
 					 priv->pci_map_rx_address[counter],
 					 MAX_FRAGMENT_SIZE_RX + 2,
-					 PCI_DMA_FROMDEVICE);
+					 DMA_FROM_DEVICE);
 		priv->pci_map_rx_address[counter] = 0;
 
 		if (priv->data_low_rx[counter])
diff --git a/drivers/net/wireless/intersil/prism54/islpci_eth.c b/drivers/net/wireless/intersil/prism54/islpci_eth.c
index 8d680250a281..74dd65716afd 100644
--- a/drivers/net/wireless/intersil/prism54/islpci_eth.c
+++ b/drivers/net/wireless/intersil/prism54/islpci_eth.c
@@ -50,9 +50,9 @@ islpci_eth_cleanup_transmit(islpci_private *priv,
 			      skb, skb->data, skb->len, skb->truesize);
 #endif
 
-			pci_unmap_single(priv->pdev,
+			dma_unmap_single(&priv->pdev->dev,
 					 priv->pci_map_tx_address[index],
-					 skb->len, PCI_DMA_TODEVICE);
+					 skb->len, DMA_TO_DEVICE);
 			dev_kfree_skb_irq(skb);
 			skb = NULL;
 		}
@@ -176,10 +176,9 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
 #endif
 
 	/* map the skb buffer to pci memory for DMA operation */
-	pci_map_address = pci_map_single(priv->pdev,
-					 (void *) skb->data, skb->len,
-					 PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(priv->pdev, pci_map_address)) {
+	pci_map_address = dma_map_single(&priv->pdev->dev, (void *)skb->data,
+					 skb->len, DMA_TO_DEVICE);
+	if (dma_mapping_error(&priv->pdev->dev, pci_map_address)) {
 		printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
 		       ndev->name);
 		goto drop_free;
@@ -323,9 +322,8 @@ islpci_eth_receive(islpci_private *priv)
 #endif
 
 	/* delete the streaming DMA mapping before processing the skb */
-	pci_unmap_single(priv->pdev,
-			 priv->pci_map_rx_address[index],
-			 MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
+	dma_unmap_single(&priv->pdev->dev, priv->pci_map_rx_address[index],
+			 MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
 
 	/* update the skb structure and align the buffer */
 	skb_put(skb, size);
@@ -431,11 +429,9 @@ islpci_eth_receive(islpci_private *priv)
 
 		/* set the streaming DMA mapping for proper PCI bus operation */
 		priv->pci_map_rx_address[index] =
-		    pci_map_single(priv->pdev, (void *) skb->data,
-				   MAX_FRAGMENT_SIZE_RX + 2,
-				   PCI_DMA_FROMDEVICE);
-		if (pci_dma_mapping_error(priv->pdev,
-					  priv->pci_map_rx_address[index])) {
+		    dma_map_single(&priv->pdev->dev, (void *)skb->data,
+				   MAX_FRAGMENT_SIZE_RX + 2, DMA_FROM_DEVICE);
+		if (dma_mapping_error(&priv->pdev->dev, priv->pci_map_rx_address[index])) {
 			/* error mapping the buffer to device accessible memory address */
 			DEBUG(SHOW_ERROR_MESSAGES,
 			      "Error mapping DMA address\n");
diff --git a/drivers/net/wireless/intersil/prism54/islpci_hotplug.c b/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
index 20291c0d962d..31a1e61326ff 100644
--- a/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
+++ b/drivers/net/wireless/intersil/prism54/islpci_hotplug.c
@@ -26,7 +26,8 @@ module_param(init_pcitm, int, 0);
 /* In this order: vendor, device, subvendor, subdevice, class, class_mask,
  * driver_data
  * If you have an update for this please contact prism54-devel@prism54.org
- * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */
+ * The latest list can be found at http://wireless.wiki.kernel.org/en/users/Drivers/p54
+ */
 static const struct pci_device_id prism54_id_tbl[] = {
 	/* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
 	{
@@ -63,16 +64,17 @@ MODULE_DEVICE_TABLE(pci, prism54_id_tbl);
 
 static int prism54_probe(struct pci_dev *, const struct pci_device_id *);
 static void prism54_remove(struct pci_dev *);
-static int prism54_suspend(struct pci_dev *, pm_message_t state);
-static int prism54_resume(struct pci_dev *);
+static int __maybe_unused prism54_suspend(struct device *);
+static int __maybe_unused prism54_resume(struct device *);
+
+static SIMPLE_DEV_PM_OPS(prism54_pm_ops, prism54_suspend, prism54_resume);
 
 static struct pci_driver prism54_driver = {
 	.name = DRV_NAME,
 	.id_table = prism54_id_tbl,
 	.probe = prism54_probe,
 	.remove = prism54_remove,
-	.suspend = prism54_suspend,
-	.resume = prism54_resume,
+	.driver.pm = &prism54_pm_ops,
 };
 
 /******************************************************************************
@@ -106,7 +108,7 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* enable PCI DMA */
-	if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+	if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) {
 		printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
 		goto do_pci_disable_device;
         }
@@ -243,16 +245,13 @@ prism54_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
-static int
-prism54_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused
+prism54_suspend(struct device *dev)
 {
-	struct net_device *ndev = pci_get_drvdata(pdev);
+	struct net_device *ndev = dev_get_drvdata(dev);
 	islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
 	BUG_ON(!priv);
 
-
-	pci_save_state(pdev);
-
 	/* tell the device not to trigger interrupts for now... */
 	isl38xx_disable_interrupts(priv->device_base);
 
@@ -266,26 +265,16 @@ prism54_suspend(struct pci_dev *pdev, pm_message_t state)
 	return 0;
 }
 
-static int
-prism54_resume(struct pci_dev *pdev)
+static int __maybe_unused
+prism54_resume(struct device *dev)
 {
-	struct net_device *ndev = pci_get_drvdata(pdev);
+	struct net_device *ndev = dev_get_drvdata(dev);
 	islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
-	int err;
 
 	BUG_ON(!priv);
 
 	printk(KERN_NOTICE "%s: got resume request\n", ndev->name);
 
-	err = pci_enable_device(pdev);
-	if (err) {
-		printk(KERN_ERR "%s: pci_enable_device failed on resume\n",
-		       ndev->name);
-		return err;
-	}
-
-	pci_restore_state(pdev);
-
 	/* alright let's go into the PREBOOT state */
 	islpci_reset(priv, 1);
 
diff --git a/drivers/net/wireless/intersil/prism54/islpci_mgt.c b/drivers/net/wireless/intersil/prism54/islpci_mgt.c
index e336eb106429..0c7fb76c7d1c 100644
--- a/drivers/net/wireless/intersil/prism54/islpci_mgt.c
+++ b/drivers/net/wireless/intersil/prism54/islpci_mgt.c
@@ -115,10 +115,11 @@ islpci_mgmt_rx_fill(struct net_device *ndev)
 			buf->size = MGMT_FRAME_SIZE;
 		}
 		if (buf->pci_addr == 0) {
-			buf->pci_addr = pci_map_single(priv->pdev, buf->mem,
+			buf->pci_addr = dma_map_single(&priv->pdev->dev,
+						       buf->mem,
 						       MGMT_FRAME_SIZE,
-						       PCI_DMA_FROMDEVICE);
-			if (pci_dma_mapping_error(priv->pdev, buf->pci_addr)) {
+						       DMA_FROM_DEVICE);
+			if (dma_mapping_error(&priv->pdev->dev, buf->pci_addr)) {
 				printk(KERN_WARNING
 				       "Failed to make memory DMA'able.\n");
 				return -ENOMEM;
@@ -203,9 +204,9 @@ islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
 #endif
 
 	err = -ENOMEM;
-	buf.pci_addr = pci_map_single(priv->pdev, buf.mem, frag_len,
-				      PCI_DMA_TODEVICE);
-	if (pci_dma_mapping_error(priv->pdev, buf.pci_addr)) {
+	buf.pci_addr = dma_map_single(&priv->pdev->dev, buf.mem, frag_len,
+				      DMA_TO_DEVICE);
+	if (dma_mapping_error(&priv->pdev->dev, buf.pci_addr)) {
 		printk(KERN_WARNING "%s: cannot map PCI memory for mgmt\n",
 		       ndev->name);
 		goto error_free;
@@ -302,8 +303,8 @@ islpci_mgt_receive(struct net_device *ndev)
 		}
 
 		/* Ensure the results of device DMA are visible to the CPU. */
-		pci_dma_sync_single_for_cpu(priv->pdev, buf->pci_addr,
-					    buf->size, PCI_DMA_FROMDEVICE);
+		dma_sync_single_for_cpu(&priv->pdev->dev, buf->pci_addr,
+					buf->size, DMA_FROM_DEVICE);
 
 		/* Perform endianess conversion for PIMFOR header in-place. */
 		header = pimfor_decode_header(buf->mem, frag_len);
@@ -414,8 +415,8 @@ islpci_mgt_cleanup_transmit(struct net_device *ndev)
 	for (; priv->index_mgmt_tx < curr_frag; priv->index_mgmt_tx++) {
 		int index = priv->index_mgmt_tx % ISL38XX_CB_MGMT_QSIZE;
 		struct islpci_membuf *buf = &priv->mgmt_tx[index];
-		pci_unmap_single(priv->pdev, buf->pci_addr, buf->size,
-				 PCI_DMA_TODEVICE);
+		dma_unmap_single(&priv->pdev->dev, buf->pci_addr, buf->size,
+				 DMA_TO_DEVICE);
 		buf->pci_addr = 0;
 		kfree(buf->mem);
 		buf->mem = NULL;