diff options
Diffstat (limited to 'arch/powerpc')
116 files changed, 10459 insertions, 3431 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 2643dbc3f289..694b0c63ee50 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -95,6 +95,10 @@ config GENERIC_TBSYNC default y if PPC32 && SMP default n +config AUDIT_ARCH + bool + default y + config DEFAULT_UIMAGE bool help @@ -354,6 +358,7 @@ endchoice config PPC_PSERIES depends on PPC_MULTIPLATFORM && PPC64 bool "IBM pSeries & new (POWER5-based) iSeries" + select MPIC select PPC_I8259 select PPC_RTAS select RTAS_ERROR_LOGGING @@ -363,6 +368,7 @@ config PPC_PSERIES config PPC_CHRP bool "Common Hardware Reference Platform (CHRP) based machines" depends on PPC_MULTIPLATFORM && PPC32 + select MPIC select PPC_I8259 select PPC_INDIRECT_PCI select PPC_RTAS @@ -373,6 +379,7 @@ config PPC_CHRP config PPC_PMAC bool "Apple PowerMac based machines" depends on PPC_MULTIPLATFORM + select MPIC select PPC_INDIRECT_PCI if PPC32 select PPC_MPC106 if PPC32 default y @@ -380,6 +387,7 @@ config PPC_PMAC config PPC_PMAC64 bool depends on PPC_PMAC && POWER4 + select MPIC select U3_DART select MPIC_BROKEN_U3 select GENERIC_TBSYNC @@ -389,6 +397,7 @@ config PPC_PMAC64 config PPC_PREP bool "PowerPC Reference Platform (PReP) based machines" depends on PPC_MULTIPLATFORM && PPC32 && BROKEN + select MPIC select PPC_I8259 select PPC_INDIRECT_PCI select PPC_UDBG_16550 @@ -397,6 +406,7 @@ config PPC_PREP config PPC_MAPLE depends on PPC_MULTIPLATFORM && PPC64 bool "Maple 970FX Evaluation Board" + select MPIC select U3_DART select MPIC_BROKEN_U3 select GENERIC_TBSYNC @@ -439,12 +449,6 @@ config U3_DART depends on PPC_MULTIPLATFORM && PPC64 default n -config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \ - || MPC7448HPC2 - bool - default y - config PPC_RTAS bool default n @@ -504,7 +508,7 @@ config CPU_FREQ_PMAC config CPU_FREQ_PMAC64 bool "Support for some Apple G5s" - depends on CPU_FREQ && PMAC_SMU && PPC64 + depends on CPU_FREQ && PPC64 select CPU_FREQ_TABLE help This adds support for frequency switching on Apple iMac G5, @@ -812,6 +816,14 @@ config GENERIC_ISA_DMA depends on PPC64 || POWER4 || 6xx && !CPM2 default y +config MPIC + bool + default n + +config MPIC_WEIRD + bool + default n + config PPC_I8259 bool default n @@ -836,9 +848,10 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) \ - || MPC7448HPC2 - default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx && !PPC_85xx && !PPC_86xx + bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ + || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 + default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \ + && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS default PCI_QSPAN if !4xx && !CPM2 && 8xx help diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts new file mode 100644 index 000000000000..d7b985e6bd2f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -0,0 +1,190 @@ +/* + * MPC7448HPC2 (Taiga) board Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * 2006 Roy Zang <Roy Zang at freescale.com>. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "mpc7448hpc2"; + compatible = "mpc74xx"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells =<0>; + linux,phandle = <200>; + + PowerPC,7448@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K bytes + i-cache-size = <8000>; // L1, 32K bytes + timebase-frequency = <0>; // 33 MHz, from uboot + clock-frequency = <0>; // From U-Boot + bus-frequency = <0>; // From U-Boot + 32-bit; + linux,phandle = <201>; + linux,boot-cpu; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 20000000 // DDR2 512M at 0 + >; + }; + + tsi108@c0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "tsi-bridge"; + ranges = <00000000 c0000000 00010000>; + reg = <c0000000 00010000>; + bus-frequency = <0>; + + i2c@7000 { + interrupt-parent = <7400>; + interrupts = <E 0>; + reg = <7000 400>; + device_type = "i2c"; + compatible = "tsi-i2c"; + }; + + mdio@6000 { + device_type = "mdio"; + compatible = "tsi-ethernet"; + + ethernet-phy@6000 { + linux,phandle = <6000>; + interrupt-parent = <7400>; + interrupts = <2 1>; + reg = <6000 50>; + phy-id = <8>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@6400 { + linux,phandle = <6400>; + interrupt-parent = <7400>; + interrupts = <2 1>; + reg = <6000 50>; + phy-id = <9>; + device_type = "ethernet-phy"; + }; + + }; + + ethernet@6200 { + #size-cells = <0>; + device_type = "network"; + model = "TSI-ETH"; + compatible = "tsi-ethernet"; + reg = <6000 200>; + address = [ 00 06 D2 00 00 01 ]; + interrupts = <10 2>; + interrupt-parent = <7400>; + phy-handle = <6000>; + }; + + ethernet@6600 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSI-ETH"; + compatible = "tsi-ethernet"; + reg = <6400 200>; + address = [ 00 06 D2 00 00 02 ]; + interrupts = <11 2>; + interrupt-parent = <7400>; + phy-handle = <6400>; + }; + + serial@7808 { + device_type = "serial"; + compatible = "ns16550"; + reg = <7808 200>; + clock-frequency = <3f6b5a00>; + interrupts = <c 0>; + interrupt-parent = <7400>; + }; + + serial@7c08 { + device_type = "serial"; + compatible = "ns16550"; + reg = <7c08 200>; + clock-frequency = <3f6b5a00>; + interrupts = <d 0>; + interrupt-parent = <7400>; + }; + + pic@7400 { + linux,phandle = <7400>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <7400 400>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + pci@1000 { + compatible = "tsi10x"; + device_type = "pci"; + linux,phandle = <1000>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <1000 1000>; + bus-range = <0 0>; + ranges = <02000000 0 e0000000 e0000000 0 1A000000 + 01000000 0 00000000 fa000000 0 00010000>; + clock-frequency = <7f28154>; + interrupt-parent = <7400>; + interrupts = <17 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 0800 0 0 1 7400 24 0 + 0800 0 0 2 7400 25 0 + 0800 0 0 3 7400 26 0 + 0800 0 0 4 7400 27 0 + + /* IDSEL 0x12 */ + 1000 0 0 1 7400 25 0 + 1000 0 0 2 7400 26 0 + 1000 0 0 3 7400 27 0 + 1000 0 0 4 7400 24 0 + + /* IDSEL 0x13 */ + 1800 0 0 1 7400 26 0 + 1800 0 0 2 7400 27 0 + 1800 0 0 3 7400 24 0 + 1800 0 0 4 7400 25 0 + + /* IDSEL 0x14 */ + 2000 0 0 1 7400 27 0 + 2000 0 0 2 7400 24 0 + 2000 0 0 3 7400 25 0 + 2000 0 0 4 7400 26 0 + >; + }; + }; + +}; diff --git a/arch/powerpc/boot/dts/mpc8349emds.dts b/arch/powerpc/boot/dts/mpc8349emds.dts new file mode 100644 index 000000000000..12f5dbf3055f --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8349emds.dts @@ -0,0 +1,328 @@ +/* + * MPC8349E MDS Device Tree Source + * + * Copyright 2005, 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8349EMDS"; + compatible = "MPC834xMDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8349@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 10000000>; // 256MB at 0 + }; + + soc8349@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <e 8>; + interrupt-parent = <700>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <f 8>; + interrupt-parent = <700>; + dfsrr; + }; + + spi@7000 { + device_type = "spi"; + compatible = "mpc83xx_spi"; + reg = <7000 1000>; + interrupts = <10 8>; + interrupt-parent = <700>; + mode = <0>; + }; + + /* phy type (ULPI or SERIAL) are only types supportted for MPH */ + /* port = 0 or 1 */ + usb@22000 { + device_type = "usb"; + compatible = "fsl-usb2-mph"; + reg = <22000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <27 2>; + phy_type = "ulpi"; + port1; + }; + /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ + usb@23000 { + device_type = "usb"; + compatible = "fsl-usb2-dr"; + reg = <23000 1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <700>; + interrupts = <26 2>; + phy_type = "ulpi"; + }; + + mdio@24520 { + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <700>; + interrupts = <11 2>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <700>; + interrupts = <12 2>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8 21 8 22 8>; + interrupt-parent = <700>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 00 00 00 00 00 ]; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <23 8 24 8 25 8>; + interrupt-parent = <700>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <700>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <a 8>; + interrupt-parent = <700>; + }; + + pci@8500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + b000 0 0 1 700 15 8 + b000 0 0 2 700 16 8 + b000 0 0 3 700 17 8 + b000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 10000000 + 42000000 0 80000000 80000000 0 10000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pci@8600 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x11 */ + 8800 0 0 1 700 14 8 + 8800 0 0 2 700 15 8 + 8800 0 0 3 700 16 8 + 8800 0 0 4 700 17 8 + + /* IDSEL 0x12 */ + 9000 0 0 1 700 16 8 + 9000 0 0 2 700 17 8 + 9000 0 0 3 700 14 8 + 9000 0 0 4 700 15 8 + + /* IDSEL 0x13 */ + 9800 0 0 1 700 17 8 + 9800 0 0 2 700 14 8 + 9800 0 0 3 700 15 8 + 9800 0 0 4 700 16 8 + + /* IDSEL 0x15 */ + a800 0 0 1 700 14 8 + a800 0 0 2 700 15 8 + a800 0 0 3 700 16 8 + a800 0 0 4 700 17 8 + + /* IDSEL 0x16 */ + b000 0 0 1 700 17 8 + b000 0 0 2 700 14 8 + b000 0 0 3 700 15 8 + b000 0 0 4 700 16 8 + + /* IDSEL 0x17 */ + b800 0 0 1 700 16 8 + b800 0 0 2 700 17 8 + b800 0 0 3 700 14 8 + b800 0 0 4 700 15 8 + + /* IDSEL 0x18 */ + b000 0 0 1 700 15 8 + b000 0 0 2 700 16 8 + b000 0 0 3 700 17 8 + b000 0 0 4 700 14 8>; + interrupt-parent = <700>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <02000000 0 b0000000 b0000000 0 10000000 + 42000000 0 90000000 90000000 0 10000000 + 01000000 0 00000000 e2100000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8600 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + /* May need to remove if on a part without crypto engine */ + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 10000>; + interrupts = <b 8>; + interrupt-parent = <700>; + num-channels = <4>; + channel-fifo-len = <18>; + exec-units-mask = <0000007e>; + /* desc mask is for rev2.0, + * we need runtime fixup for >2.0 */ + descriptor-types-mask = <01010ebf>; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + pic@700 { + linux,phandle = <700>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts new file mode 100644 index 000000000000..5f41c1f7a5f3 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -0,0 +1,257 @@ +/* + * MPC8540 ADS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8540ADS"; + compatible = "MPC85xxADS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8540@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8540@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <37 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + address = [ 00 E0 0C 00 73 00 ]; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + address = [ 00 E0 0C 00 73 01 ]; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "FEC"; + compatible = "gianfar"; + reg = <26000 1000>; + address = [ 00 E0 0C 00 73 02 ]; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <19 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x02 */ + 1000 0 0 1 40000 31 1 + 1000 0 0 2 40000 32 1 + 1000 0 0 3 40000 33 1 + 1000 0 0 4 40000 34 1 + + /* IDSEL 0x03 */ + 1800 0 0 1 40000 34 1 + 1800 0 0 2 40000 31 1 + 1800 0 0 3 40000 32 1 + 1800 0 0 4 40000 33 1 + + /* IDSEL 0x04 */ + 2000 0 0 1 40000 33 1 + 2000 0 0 2 40000 34 1 + 2000 0 0 3 40000 31 1 + 2000 0 0 4 40000 32 1 + + /* IDSEL 0x05 */ + 2800 0 0 1 40000 32 1 + 2800 0 0 2 40000 33 1 + 2800 0 0 3 40000 34 1 + 2800 0 0 4 40000 31 1 + + /* IDSEL 0x0c */ + 6000 0 0 1 40000 31 1 + 6000 0 0 2 40000 32 1 + 6000 0 0 3 40000 33 1 + 6000 0 0 4 40000 34 1 + + /* IDSEL 0x0d */ + 6800 0 0 1 40000 34 1 + 6800 0 0 2 40000 31 1 + 6800 0 0 3 40000 32 1 + 6800 0 0 4 40000 33 1 + + /* IDSEL 0x0e */ + 7000 0 0 1 40000 33 1 + 7000 0 0 2 40000 34 1 + 7000 0 0 3 40000 31 1 + 7000 0 0 4 40000 32 1 + + /* IDSEL 0x0f */ + 7800 0 0 1 40000 32 1 + 7800 0 0 2 40000 33 1 + 7800 0 0 3 40000 34 1 + 7800 0 0 4 40000 31 1 + + /* IDSEL 0x12 */ + 9000 0 0 1 40000 31 1 + 9000 0 0 2 40000 32 1 + 9000 0 0 3 40000 33 1 + 9000 0 0 4 40000 34 1 + + /* IDSEL 0x13 */ + 9800 0 0 1 40000 34 1 + 9800 0 0 2 40000 31 1 + 9800 0 0 3 40000 32 1 + 9800 0 0 4 40000 33 1 + + /* IDSEL 0x14 */ + a000 0 0 1 40000 33 1 + a000 0 0 2 40000 34 1 + a000 0 0 3 40000 31 1 + a000 0 0 4 40000 32 1 + + /* IDSEL 0x15 */ + a800 0 0 1 40000 32 1 + a800 0 0 2 40000 33 1 + a800 0 0 3 40000 34 1 + a800 0 0 4 40000 31 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts new file mode 100644 index 000000000000..7be0bc659e1c --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8541 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8541CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8541@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8541@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts new file mode 100644 index 000000000000..893d7957c174 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -0,0 +1,287 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8548CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8548@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8548@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 E0 0C 00 73 02 ]; + interrupts = <f 2 10 2 11 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + +/* eTSEC 4 is currently broken + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + local-mac-address = [ 00 E0 0C 00 73 03 ]; + interrupts = <15 2 16 2 17 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + */ + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts new file mode 100644 index 000000000000..118f5a887651 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -0,0 +1,244 @@ +/* + * MPC8555 CDS Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8555CDS"; + compatible = "MPC85xxCDS"; + #address-cells = <1>; + #size-cells = <1>; + linux,phandle = <100>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + linux,phandle = <200>; + + PowerPC,8555@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // 166 MHz + clock-frequency = <0>; // 825 MHz, from uboot + 32-bit; + linux,phandle = <201>; + }; + }; + + memory { + device_type = "memory"; + linux,phandle = <300>; + reg = <00000000 08000000>; // 128M at 0x0 + }; + + soc8555@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <35 0>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <0d 2 0e 2 12 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + local-mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <13 2 14 2 18 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; // reg base, size + clock-frequency = <0>; // should we fill in in uboot? + interrupts = <1a 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + linux,phandle = <8000>; + interrupt-map-mask = <1f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x10 */ + 08000 0 0 1 40000 30 1 + 08000 0 0 2 40000 31 1 + 08000 0 0 3 40000 32 1 + 08000 0 0 4 40000 33 1 + + /* IDSEL 0x11 */ + 08800 0 0 1 40000 30 1 + 08800 0 0 2 40000 31 1 + 08800 0 0 3 40000 32 1 + 08800 0 0 4 40000 33 1 + + /* IDSEL 0x12 (Slot 1) */ + 09000 0 0 1 40000 30 1 + 09000 0 0 2 40000 31 1 + 09000 0 0 3 40000 32 1 + 09000 0 0 4 40000 33 1 + + /* IDSEL 0x13 (Slot 2) */ + 09800 0 0 1 40000 31 1 + 09800 0 0 2 40000 32 1 + 09800 0 0 3 40000 33 1 + 09800 0 0 4 40000 30 1 + + /* IDSEL 0x14 (Slot 3) */ + 0a000 0 0 1 40000 32 1 + 0a000 0 0 2 40000 33 1 + 0a000 0 0 3 40000 30 1 + 0a000 0 0 4 40000 31 1 + + /* IDSEL 0x15 (Slot 4) */ + 0a800 0 0 1 40000 33 1 + 0a800 0 0 2 40000 30 1 + 0a800 0 0 3 40000 31 1 + 0a800 0 0 4 40000 32 1 + + /* Bus 1 (Tundra Bridge) */ + /* IDSEL 0x12 (ISA bridge) */ + 19000 0 0 1 40000 30 1 + 19000 0 0 2 40000 31 1 + 19000 0 0 3 40000 32 1 + 19000 0 0 4 40000 33 1>; + interrupt-parent = <40000>; + interrupts = <08 2>; + bus-range = <0 0>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + compatible = "85xx"; + device_type = "pci"; + + i8259@19000 { + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + reg = <19000 0 0 0 1>; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <1>; + interrupt-parent = <8000>; + }; + }; + + pci@9000 { + linux,phandle = <9000>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + + /* IDSEL 0x15 */ + a800 0 0 1 40000 3b 1 + a800 0 0 2 40000 3b 1 + a800 0 0 3 40000 3b 1 + a800 0 0 4 40000 3b 1>; + interrupt-parent = <40000>; + interrupts = <09 2>; + bus-range = <0 0>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <3f940aa>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + compatible = "85xx"; + device_type = "pci"; + }; + + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts new file mode 100644 index 000000000000..f0c7731743ea --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -0,0 +1,339 @@ +/* + * MPC8641 HPCN Device Tree Source + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +/ { + model = "MPC8641HPCN"; + compatible = "mpc86xx"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <2>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + 32-bit; + linux,boot-cpu; + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; // 33 MHz, from uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 40000000>; // 1G at 0x0 + }; + + soc8641@f8000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 f8000000 00100000>; + reg = <f8000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <2b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + i2c@3100 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3100 100>; + interrupts = <2b 2>; + interrupt-parent = <40000>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + linux,phandle = <24520>; + ethernet-phy@0 { + linux,phandle = <2452000>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + ethernet-phy@1 { + linux,phandle = <2452001>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + ethernet-phy@2 { + linux,phandle = <2452002>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <2>; + device_type = "ethernet-phy"; + }; + ethernet-phy@3 { + linux,phandle = <2452003>; + interrupt-parent = <40000>; + interrupts = <4a 1>; + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + mac-address = [ 00 E0 0C 00 73 00 ]; + interrupts = <1d 2 1e 2 22 2>; + interrupt-parent = <40000>; + phy-handle = <2452000>; + }; + + ethernet@25000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <25000 1000>; + mac-address = [ 00 E0 0C 00 73 01 ]; + interrupts = <23 2 24 2 28 2>; + interrupt-parent = <40000>; + phy-handle = <2452001>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + mac-address = [ 00 E0 0C 00 02 FD ]; + interrupts = <1F 2 20 2 21 2>; + interrupt-parent = <40000>; + phy-handle = <2452002>; + }; + + ethernet@27000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <27000 1000>; + mac-address = [ 00 E0 0C 00 03 FD ]; + interrupts = <25 2 26 2 27 2>; + interrupt-parent = <40000>; + phy-handle = <2452003>; + }; + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <2a 2>; + interrupt-parent = <40000>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1c 2>; + interrupt-parent = <40000>; + }; + + pci@8000 { + compatible = "86xx"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8000 1000>; + bus-range = <0 fe>; + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e2000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <40000>; + interrupts = <18 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x11 */ + 8800 0 0 1 4d0 3 2 + 8800 0 0 2 4d0 4 2 + 8800 0 0 3 4d0 5 2 + 8800 0 0 4 4d0 6 2 + + /* IDSEL 0x12 */ + 9000 0 0 1 4d0 4 2 + 9000 0 0 2 4d0 5 2 + 9000 0 0 3 4d0 6 2 + 9000 0 0 4 4d0 3 2 + + /* IDSEL 0x13 */ + 9800 0 0 1 4d0 0 0 + 9800 0 0 2 4d0 0 0 + 9800 0 0 3 4d0 0 0 + 9800 0 0 4 4d0 0 0 + + /* IDSEL 0x14 */ + a000 0 0 1 4d0 0 0 + a000 0 0 2 4d0 0 0 + a000 0 0 3 4d0 0 0 + a000 0 0 4 4d0 0 0 + + /* IDSEL 0x15 */ + a800 0 0 1 4d0 0 0 + a800 0 0 2 4d0 0 0 + a800 0 0 3 4d0 0 0 + a800 0 0 4 4d0 0 0 + + /* IDSEL 0x16 */ + b000 0 0 1 4d0 0 0 + b000 0 0 2 4d0 0 0 + b000 0 0 3 4d0 0 0 + b000 0 0 4 4d0 0 0 + + /* IDSEL 0x17 */ + b800 0 0 1 4d0 0 0 + b800 0 0 2 4d0 0 0 + b800 0 0 3 4d0 0 0 + b800 0 0 4 4d0 0 0 + + /* IDSEL 0x18 */ + c000 0 0 1 4d0 0 0 + c000 0 0 2 4d0 0 0 + c000 0 0 3 4d0 0 0 + c000 0 0 4 4d0 0 0 + + /* IDSEL 0x19 */ + c800 0 0 1 4d0 0 0 + c800 0 0 2 4d0 0 0 + c800 0 0 3 4d0 0 0 + c800 0 0 4 4d0 0 0 + + /* IDSEL 0x1a */ + d000 0 0 1 4d0 6 2 + d000 0 0 2 4d0 3 2 + d000 0 0 3 4d0 4 2 + d000 0 0 4 4d0 5 2 + + + /* IDSEL 0x1b */ + d800 0 0 1 4d0 5 2 + d800 0 0 2 4d0 0 0 + d800 0 0 3 4d0 0 0 + d800 0 0 4 4d0 0 0 + + /* IDSEL 0x1c */ + e000 0 0 1 4d0 9 2 + e000 0 0 2 4d0 a 2 + e000 0 0 3 4d0 c 2 + e000 0 0 4 4d0 7 2 + + /* IDSEL 0x1d */ + e800 0 0 1 4d0 9 2 + e800 0 0 2 4d0 a 2 + e800 0 0 3 4d0 b 2 + e800 0 0 4 4d0 0 0 + + /* IDSEL 0x1e */ + f000 0 0 1 4d0 c 2 + f000 0 0 2 4d0 0 0 + f000 0 0 3 4d0 0 0 + f000 0 0 4 4d0 0 0 + + /* IDSEL 0x1f */ + f800 0 0 1 4d0 6 2 + f800 0 0 2 4d0 0 0 + f800 0 0 3 4d0 0 0 + f800 0 0 4 4d0 0 0 + >; + i8259@4d0 { + linux,phandle = <4d0>; + clock-frequency = <0>; + interrupt-controller; + device_type = "interrupt-controller"; + #address-cells = <0>; + #interrupt-cells = <2>; + built-in; + compatible = "chrp,iic"; + big-endian; + interrupts = <49 2>; + interrupt-parent = <40000>; + }; + + }; + pic@40000 { + linux,phandle = <40000>; + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + interrupts = < + 10 2 11 2 12 2 13 2 + 14 2 15 2 16 2 17 2 + 18 2 19 2 1a 2 1b 2 + 1c 2 1d 2 1e 2 1f 2 + 20 2 21 2 22 2 23 2 + 24 2 25 2 26 2 27 2 + 28 2 29 2 2a 2 2b 2 + 2c 2 2d 2 2e 2 2f 2 + 30 2 31 2 32 2 33 2 + 34 2 35 2 36 2 37 2 + 38 2 39 2 2a 2 3b 2 + 3c 2 3d 2 3e 2 3f 2 + 48 1 49 2 4a 1 + >; + interrupt-parent = <40000>; + }; + }; +}; diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index e028a2ecb8a3..6fd9e7acec29 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc6 -# Thu Jun 22 15:28:36 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:20:32 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -52,6 +54,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y @@ -69,10 +72,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -119,7 +124,7 @@ CONFIG_PPC_MULTIPLATFORM=y CONFIG_PPC_CELL=y CONFIG_PPC_CELL_NATIVE=y CONFIG_PPC_IBM_CELL_BLADE=y -CONFIG_PPC_SYSTEMSIM=y +CONFIG_UDBG_RTAS_CONSOLE=y # CONFIG_U3_DART is not set CONFIG_PPC_RTAS=y # CONFIG_RTAS_ERROR_LOGGING is not set @@ -130,6 +135,7 @@ CONFIG_MMIO_NVRAM=y # CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set +# CONFIG_MPIC is not set # # Cell Broadband Engine options @@ -154,6 +160,7 @@ CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 # CONFIG_IOMMU_VMERGE is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -173,6 +180,7 @@ CONFIG_SPARSEMEM_EXTREME=y CONFIG_MEMORY_HOTPLUG=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y CONFIG_ARCH_MEMORY_PROBE=y # CONFIG_PPC_64K_PAGES is not set @@ -187,6 +195,7 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y @@ -235,6 +244,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -252,7 +263,10 @@ CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_IPV6_TUNNEL=m +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -336,6 +351,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -372,6 +388,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -449,8 +466,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m # CONFIG_MD_RAID10 is not set -# CONFIG_MD_RAID5 is not set -# CONFIG_MD_RAID6 is not set +# CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=m @@ -544,6 +560,7 @@ CONFIG_SPIDER_NET=m # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -620,6 +637,7 @@ CONFIG_SERIO_SERPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -680,6 +698,7 @@ CONFIG_WATCHDOG_RTAS=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -725,6 +744,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -761,7 +781,6 @@ CONFIG_I2C_ALGOBIT=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -787,6 +806,7 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -794,6 +814,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -841,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_INFINIBAND=y CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB=m @@ -857,6 +879,19 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -877,6 +912,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1034,6 +1070,9 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1046,14 +1085,19 @@ CONFIG_ZLIB_DEFLATE=m # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=15 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig new file mode 100644 index 000000000000..bbf2b5f8a8cb --- /dev/null +++ b/arch/powerpc/configs/chrp32_defconfig @@ -0,0 +1,1397 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:22:54 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +# CONFIG_DEFAULT_UIMAGE is not set + +# +# Processor support +# +CONFIG_CLASSIC32=y +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Block layer +# +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +# CONFIG_PPC_ISERIES is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_APUS is not set +CONFIG_PPC_CHRP=y +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set +CONFIG_PPC_RTAS=y +# CONFIG_RTAS_ERROR_LOGGING is not set +CONFIG_RTAS_PROC=y +# CONFIG_MMIO_NVRAM is not set +CONFIG_PPC_MPC106=y +# CONFIG_PPC_970_NAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y + +# +# Kernel options +# +CONFIG_HIGHMEM=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_PREEMPT_BKL=y +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +# CONFIG_KEXEC is not set +CONFIG_IRQ_ALL_CPUS=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ISA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set + +# +# Core Netfilter Configuration +# +# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_XTABLES is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set +# CONFIG_IP_NF_QUEUE is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +CONFIG_BLK_DEV_FD=y +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_SL82C105=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +CONFIG_SCSI_SYM53C8XX_MMIO=y +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +CONFIG_NET_TULIP=y +# CONFIG_DE2104X is not set +# CONFIG_TULIP is not set +CONFIG_DE4X5=y +# CONFIG_WINBOND_840 is not set +# CONFIG_DM9102 is not set +# CONFIG_ULI526X is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +CONFIG_PCNET32=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=y +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +CONFIG_VIA_RHINE=y +# CONFIG_VIA_RHINE_MMIO is not set +# CONFIG_VIA_RHINE_NAPI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_MV643XX_ETH=y +# CONFIG_MV643XX_ETH_0 is not set +# CONFIG_MV643XX_ETH_1 is not set +# CONFIG_MV643XX_ETH_2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_INPORT is not set +# CONFIG_MOUSE_LOGIBM is not set +# CONFIG_MOUSE_PC110PAD is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_PCSPKR is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_RTAS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_NVRAM=y +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_HYDRA is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_MACMODES=y +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +CONFIG_FB_OF=y +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +CONFIG_FB_MATROX=y +CONFIG_FB_MATROX_MILLENIUM=y +CONFIG_FB_MATROX_MYSTIQUE=y +CONFIG_FB_MATROX_G=y +# CONFIG_FB_MATROX_I2C is not set +# CONFIG_FB_MATROX_MULTIHEAD is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +CONFIG_FB_ATY=y +CONFIG_FB_ATY_CT=y +# CONFIG_FB_ATY_GENERIC_LCD is not set +CONFIG_FB_ATY_GX=y +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +CONFIG_FB_3DFX=y +# CONFIG_FB_3DFX_ACCEL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_DEBUGGER=y +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index a45627547d03..4b9c2ed925f5 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Wed Apr 19 13:24:37 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:22:55 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -33,6 +35,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=4 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -50,6 +53,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y @@ -67,10 +71,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -116,12 +122,15 @@ CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_U3_DART=y -CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set +CONFIG_PPC_970_NAP=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -136,6 +145,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_PMAC64=y # CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y # # Kernel options @@ -153,6 +163,7 @@ CONFIG_BINFMT_ELF=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y # CONFIG_HOTPLUG_CPU is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -168,6 +179,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -180,10 +192,12 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -227,6 +241,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -239,6 +255,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -263,6 +280,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -318,6 +336,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -355,6 +374,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 @@ -417,7 +437,6 @@ CONFIG_IDEDMA_PCI_AUTO=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -478,6 +497,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set @@ -497,7 +517,6 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -514,9 +533,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -559,7 +576,6 @@ CONFIG_IEEE1394_OHCI1394=y # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y @@ -573,6 +589,7 @@ CONFIG_IEEE1394_RAWIO=y # Macintosh device drivers # CONFIG_ADB_PMU=y +# CONFIG_ADB_PMU_LED is not set CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y CONFIG_WINDFARM=y @@ -643,6 +660,7 @@ CONFIG_TIGON3=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -739,6 +757,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -764,6 +783,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -774,6 +794,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m # CONFIG_DRM is not set @@ -813,6 +834,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -849,7 +871,6 @@ CONFIG_I2C_POWERMAC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -865,6 +886,7 @@ CONFIG_I2C_POWERMAC=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -875,22 +897,19 @@ CONFIG_I2C_POWERMAC=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set @@ -990,6 +1009,18 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1027,6 +1058,17 @@ CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y # +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + +# # USB devices # CONFIG_SND_USB_AUDIO=m @@ -1060,6 +1102,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1110,9 +1153,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1154,7 +1195,7 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m @@ -1162,6 +1203,7 @@ CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1191,9 +1233,11 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EZUSB=y @@ -1207,10 +1251,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1235,6 +1281,14 @@ CONFIG_USB_EZUSB=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -1249,6 +1303,19 @@ CONFIG_USB_EZUSB=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1273,7 +1340,6 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -1282,6 +1348,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -1363,7 +1430,9 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1444,6 +1513,9 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1457,14 +1529,19 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1476,11 +1553,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig index a95e455a1944..eb0885ea0731 100644 --- a/arch/powerpc/configs/iseries_defconfig +++ b/arch/powerpc/configs/iseries_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc1 -# Wed Apr 19 11:46:44 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:22:57 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -34,6 +36,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -51,6 +54,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y @@ -69,10 +73,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -113,12 +119,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PPC_ISERIES=y # CONFIG_EMBEDDED6xx is not set # CONFIG_APUS is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_IBMVIO=y # CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set +# CONFIG_MPIC is not set # # Kernel options @@ -135,6 +146,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_IRQ_ALL_CPUS=y CONFIG_LPARCFG=y # CONFIG_NUMA is not set @@ -149,6 +161,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -160,10 +173,12 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -207,6 +222,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -219,6 +236,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -246,9 +264,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -267,6 +287,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -360,6 +381,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -396,6 +418,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -453,6 +476,7 @@ CONFIG_SCSI_FC_ATTRS=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -464,7 +488,6 @@ CONFIG_SCSI_IBMVSCSI=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_LPFC is not set @@ -481,9 +504,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -# CONFIG_MD_RAID5_RESHAPE is not set -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -596,6 +617,7 @@ CONFIG_E1000=m # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -706,6 +728,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -741,7 +764,6 @@ CONFIG_MAX_RAW_DEVS=256 # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -757,6 +779,7 @@ CONFIG_MAX_RAW_DEVS=256 # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -766,7 +789,9 @@ CONFIG_MAX_RAW_DEVS=256 # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -801,6 +826,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -815,6 +848,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -843,7 +889,6 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -852,6 +897,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=m @@ -933,8 +979,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1013,10 +1061,12 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y # # Instrumentation Support # +# CONFIG_PROFILING is not set # CONFIG_KPROBES is not set # @@ -1024,14 +1074,19 @@ CONFIG_TEXTSEARCH_FSM=m # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1042,11 +1097,7 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUGGER is not set CONFIG_IRQSTACKS=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 80a0db43aeb7..2860be106f4f 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc6 -# Wed Mar 15 16:19:54 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:24:55 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -29,8 +32,10 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y # CONFIG_ALTIVEC is not set CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=2 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -48,11 +53,13 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -64,14 +71,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -82,7 +87,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -91,6 +95,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +# CONFIG_BLK_DEV_IO_TRACE is not set # # IO Schedulers @@ -116,14 +121,18 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PMAC is not set CONFIG_PPC_MAPLE=y # CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_U3_DART=y -CONFIG_MPIC=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_MPIC_BROKEN_U3=y # CONFIG_PPC_MPC106 is not set +CONFIG_PPC_970_NAP=y # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y # # Kernel options @@ -140,6 +149,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -155,6 +165,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -167,11 +178,12 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -CONFIG_PCI_LEGACY_PROC=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -197,6 +209,8 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -214,12 +228,18 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -274,6 +294,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -310,6 +331,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -484,6 +506,7 @@ CONFIG_E1000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -556,6 +579,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200 CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -563,6 +587,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -586,7 +611,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -632,10 +657,10 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -654,9 +679,7 @@ CONFIG_I2C_AMD8111=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -671,7 +694,6 @@ CONFIG_I2C_AMD8111=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -684,22 +706,21 @@ CONFIG_I2C_AMD8111=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -707,6 +728,7 @@ CONFIG_I2C_AMD8111=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -718,6 +740,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -735,6 +758,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -771,9 +795,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -787,15 +809,6 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_MDC800 is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -816,7 +829,7 @@ CONFIG_USB_SERIAL=y # CONFIG_USB_SERIAL_CONSOLE is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set @@ -824,6 +837,7 @@ CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_CYPRESS_M8=m # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set +# CONFIG_USB_SERIAL_FUNSOFT is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set @@ -848,12 +862,15 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set CONFIG_USB_SERIAL_TI=m # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set CONFIG_USB_EZUSB=y @@ -867,10 +884,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -890,6 +909,19 @@ CONFIG_USB_EZUSB=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -899,6 +931,24 @@ CONFIG_USB_EZUSB=y # # +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -917,6 +967,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -949,7 +1000,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1067,6 +1117,7 @@ CONFIG_CRC_CCITT=y CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y # # Instrumentation Support @@ -1079,14 +1130,20 @@ CONFIG_ZLIB_INFLATE=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set CONFIG_DEBUG_SLAB=y -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SLAB_LEAK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1100,11 +1157,7 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y # CONFIG_IRQSTACKS is not set CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index 15a50f4ceb1f..719fba4eb421 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc4 -# Sat May 27 18:45:55 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:26:55 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -29,6 +31,7 @@ CONFIG_CLASSIC32=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set @@ -39,6 +42,7 @@ CONFIG_PPC_FPU=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -56,6 +60,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set @@ -70,10 +75,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -110,13 +117,16 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_ISERIES is not set CONFIG_EMBEDDED6xx=y # CONFIG_APUS is not set -CONFIG_MPIC=y +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set # CONFIG_PPC_MPC106 is not set # CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set +# CONFIG_PPC_TODC is not set # CONFIG_KATANA is not set # CONFIG_WILLOW is not set # CONFIG_CPCI690 is not set @@ -146,6 +156,7 @@ CONFIG_MPC7448HPC2=y # CONFIG_EV64360 is not set CONFIG_TSI108_BRIDGE=y # CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y # # Kernel options @@ -160,6 +171,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -169,10 +181,10 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y @@ -180,10 +192,12 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +CONFIG_MPIC_WEIRD=y # CONFIG_PPC_I8259 is not set # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # # PCCARD (PCMCIA/CardBus) support @@ -221,6 +235,8 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -240,6 +256,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -247,6 +265,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -300,6 +319,7 @@ CONFIG_TCP_CONG_BIC=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -336,6 +356,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -399,6 +420,7 @@ CONFIG_SCSI_SATA=y CONFIG_SCSI_SATA_MV=y # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set @@ -481,6 +503,9 @@ CONFIG_PHYLIB=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -538,7 +563,6 @@ CONFIG_8139TOO=y # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_TSI108_ETH=y # # Ethernet (10000 Mbit) @@ -546,6 +570,7 @@ CONFIG_TSI108_ETH=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -645,6 +670,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -679,13 +705,13 @@ CONFIG_GEN_RTC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -697,6 +723,7 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -706,7 +733,9 @@ CONFIG_HWMON=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -763,6 +792,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -783,6 +825,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -884,6 +927,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y # # Instrumentation Support @@ -895,17 +939,13 @@ CONFIG_CRC32=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set # CONFIG_UNWIND_INFO is not set # CONFIG_BOOTX_TEXT is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig new file mode 100644 index 000000000000..8da6a47f0339 --- /dev/null +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -0,0 +1,1344 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:28:05 2006 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_52xx is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_8xx is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC834x_SYS is not set +CONFIG_MPC834x_ITX=y +CONFIG_MPC834x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_DEBUG is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_PARTITIONS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xfe000000 +CONFIG_MTD_PHYSMAP_LEN=0x1000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +# CONFIG_BLK_DEV_IDE is not set +# CONFIG_BLK_DEV_HD_ONLY is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +CONFIG_SCSI_SATA=y +# CONFIG_SCSI_SATA_AHCI is not set +# CONFIG_SCSI_SATA_SVW is not set +# CONFIG_SCSI_ATA_PIIX is not set +# CONFIG_SCSI_SATA_MV is not set +# CONFIG_SCSI_SATA_NV is not set +# CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_SATA_QSTOR is not set +# CONFIG_SCSI_SATA_PROMISE is not set +# CONFIG_SCSI_SATA_SX4 is not set +CONFIG_SCSI_SATA_SIL=y +# CONFIG_SCSI_SATA_SIL24 is not set +# CONFIG_SCSI_SATA_SIS is not set +# CONFIG_SCSI_SATA_ULI is not set +# CONFIG_SCSI_SATA_VIA is not set +# CONFIG_SCSI_SATA_VITESSE is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Multi-device support (RAID and LVM) +# +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_LINEAR=y +CONFIG_MD_RAID0=y +CONFIG_MD_RAID1=y +# CONFIG_MD_RAID10 is not set +# CONFIG_MD_RAID456 is not set +# CONFIG_MD_MULTIPATH is not set +# CONFIG_MD_FAULTY is not set +# CONFIG_BLK_DEV_DM is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +CONFIG_CICADA_PHY=y +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=y +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set +# CONFIG_TELCLOCK is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_MPC83xx=y + +# +# SPI Protocol Masters +# + +# +# Dallas's 1-wire bus +# + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_NET2280=y +CONFIG_USB_NET2280=y +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_DS1307=y +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +CONFIG_NET_DMA=y + +# +# DMA Devices +# +CONFIG_INTEL_IOATDMA=y + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +# CONFIG_MSDOS_PARTITION is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +# CONFIG_NLS is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_LOG_BUF_SHIFT=17 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_BOOTX_TEXT=y +CONFIG_SERIAL_TEXT_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc834x_sys_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig index 5078b0441d61..9eefab967898 100644 --- a/arch/powerpc/configs/mpc834x_sys_defconfig +++ b/arch/powerpc/configs/mpc834x_mds_defconfig @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc6 -# Wed Mar 15 16:19:56 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:28:54 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -27,17 +30,19 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_52xx is not set # CONFIG_PPC_82xx is not set CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set # CONFIG_E200 is not set -# CONFIG_E500 is not set CONFIG_6xx=y CONFIG_83xx=y CONFIG_PPC_FPU=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -55,9 +60,11 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +# CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_EMBEDDED=y @@ -67,14 +74,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y # CONFIG_EPOLL is not set CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -85,7 +90,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set @@ -94,6 +98,8 @@ CONFIG_OBSOLETE_MODPARM=y # Block layer # # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set # # IO Schedulers @@ -114,7 +120,9 @@ CONFIG_PPC_GEN550=y # Platform support # CONFIG_MPC834x_SYS=y +# CONFIG_MPC834x_ITX is not set CONFIG_MPC834x=y +# CONFIG_MPIC is not set # # Kernel options @@ -129,6 +137,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -138,10 +147,10 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SOFTWARE_SUSPEND is not set CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -149,12 +158,13 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCIEPORTBUS is not set # # PCCARD (PCMCIA/CardBus) support @@ -192,6 +202,8 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -209,12 +221,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -268,6 +286,7 @@ CONFIG_TCP_CONG_BIC=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -304,6 +323,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -371,6 +391,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -433,6 +456,7 @@ CONFIG_GIANFAR=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -507,6 +531,7 @@ CONFIG_INPUT=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -543,6 +568,7 @@ CONFIG_83xx_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -589,10 +615,10 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -611,10 +637,8 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_M41T00 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -629,13 +653,13 @@ CONFIG_I2C_MPC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -664,10 +688,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83627HF is not set @@ -679,13 +705,10 @@ CONFIG_HWMON=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -695,7 +718,9 @@ CONFIG_HWMON=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -707,6 +732,7 @@ CONFIG_HWMON=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set # @@ -724,6 +750,19 @@ CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -733,6 +772,24 @@ CONFIG_USB_ARCH_HAS_OHCI=y # # +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -753,6 +810,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -781,7 +839,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -854,6 +911,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y # # Instrumentation Support @@ -865,15 +923,13 @@ CONFIG_CRC32=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_FS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_SERIAL_TEXT_DEBUG is not set -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/mpc8540_ads_defconfig index 7f0780f1aa39..67e7d0b5793d 100644 --- a/arch/powerpc/configs/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/mpc8540_ads_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Mon Mar 27 23:37:36 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:29:23 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -29,6 +31,7 @@ CONFIG_DEFAULT_UIMAGE=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set @@ -39,6 +42,7 @@ CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -56,6 +60,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set @@ -71,10 +76,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -103,15 +110,16 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_MPIC=y # CONFIG_WANT_EARLY_SERIAL is not set # # Platform support # CONFIG_MPC8540_ADS=y +# CONFIG_MPC85xx_CDS is not set CONFIG_MPC8540=y CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y # # Kernel options @@ -127,6 +135,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -136,16 +145,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y # # Bus options # +# CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y @@ -187,6 +197,8 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -204,12 +216,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -264,6 +282,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -295,6 +314,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -355,6 +375,9 @@ CONFIG_PHYLIB=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -464,6 +487,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -473,7 +497,6 @@ CONFIG_GEN_RTC=y # # Ftape, the floppy tape device driver # -# CONFIG_AGP is not set # CONFIG_RAW_DRIVER is not set # @@ -496,13 +519,13 @@ CONFIG_GEN_RTC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -514,6 +537,7 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -523,7 +547,9 @@ CONFIG_HWMON=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -552,6 +578,19 @@ CONFIG_HWMON=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # @@ -560,6 +599,24 @@ CONFIG_HWMON=y # # +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -580,6 +637,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -677,6 +735,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y # # Instrumentation Support @@ -688,14 +747,19 @@ CONFIG_CRC32=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set @@ -706,11 +770,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/mpc85xx_cds_defconfig index 9bb022a523fe..72edf9f66829 100644 --- a/arch/powerpc/configs/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/mpc85xx_cds_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16 -# Sun Apr 2 11:23:42 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:29:49 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -19,7 +21,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set -# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_DEFAULT_UIMAGE=y # # Processor support @@ -29,6 +31,7 @@ CONFIG_PPC_UDBG_16550=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set @@ -39,6 +42,7 @@ CONFIG_BOOKE=y CONFIG_FSL_BOOKE=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -56,6 +60,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set @@ -71,10 +76,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -103,7 +110,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" -CONFIG_MPIC=y # CONFIG_WANT_EARLY_SERIAL is not set # @@ -113,6 +119,7 @@ CONFIG_MPIC=y CONFIG_MPC85xx_CDS=y CONFIG_MPC8540=y CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y # # Kernel options @@ -128,6 +135,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -137,21 +145,23 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set -# CONFIG_SOFTWARE_SUSPEND is not set # CONFIG_SECCOMP is not set CONFIG_ISA_DMA_API=y # # Bus options # -CONFIG_PPC_I8259=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -190,6 +200,8 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -209,6 +221,8 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -216,6 +230,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -270,6 +285,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -306,6 +322,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -425,6 +442,9 @@ CONFIG_PHYLIB=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -470,6 +490,7 @@ CONFIG_GFAR_NAPI=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -568,6 +589,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -602,13 +624,13 @@ CONFIG_GEN_RTC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support # CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -620,6 +642,7 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -629,7 +652,9 @@ CONFIG_HWMON=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -664,6 +689,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_NEW_LEDS is not set # +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # # CONFIG_INFINIBAND is not set @@ -678,6 +711,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -698,6 +744,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -795,6 +842,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y # # Instrumentation Support @@ -806,14 +854,19 @@ CONFIG_CRC32=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set @@ -824,11 +877,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig index d7a30f9bc535..92a527fccf83 100644 --- a/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc3 -# Fri Jun 16 10:47:09 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:30:15 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -41,6 +43,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y CONFIG_SMP=y CONFIG_NR_CPUS=2 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -58,6 +61,7 @@ CONFIG_LOCALVERSION="" # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y @@ -75,10 +79,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y # CONFIG_SLAB is not set +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_SLOB=y @@ -107,9 +113,9 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" -CONFIG_MPIC=y # CONFIG_WANT_EARLY_SERIAL is not set CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y # # Platform Support @@ -131,6 +137,7 @@ CONFIG_PREEMPT_NONE=y CONFIG_PREEMPT_BKL=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_IRQ_ALL_CPUS is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -141,6 +148,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -151,11 +159,13 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y CONFIG_PPC_INDIRECT_PCI=y CONFIG_FSL_SOC=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -194,6 +204,8 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=y # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -212,6 +224,8 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -224,7 +238,10 @@ CONFIG_IPV6=y # CONFIG_INET6_IPCOMP is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y # CONFIG_IPV6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -279,6 +296,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -315,6 +333,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -383,6 +402,8 @@ CONFIG_PHYLIB=y # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set CONFIG_VITESSE_PHY=y +# CONFIG_SMSC_PHY is not set +# CONFIG_FIXED_PHY is not set # # Ethernet (10 or 100Mbit) @@ -426,6 +447,7 @@ CONFIG_GIANFAR=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -500,6 +522,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -534,6 +557,7 @@ CONFIG_UNIX98_PTYS=y # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set @@ -579,6 +603,7 @@ CONFIG_I2C=y # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_MPC=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -615,7 +640,6 @@ CONFIG_SENSORS_EEPROM=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -631,6 +655,7 @@ CONFIG_SENSORS_EEPROM=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -640,6 +665,7 @@ CONFIG_SENSORS_EEPROM=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -648,6 +674,7 @@ CONFIG_SENSORS_EEPROM=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -704,6 +731,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -870,6 +910,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y # # Instrumentation Support @@ -881,13 +922,18 @@ CONFIG_CRC32=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_INFO is not set @@ -899,11 +945,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUGGER is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index addc79381c3b..6861dde7d77b 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1,16 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc5 -# Mon May 29 14:47:49 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:30:23 2006 # # CONFIG_PPC64 is not set CONFIG_PPC32=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y @@ -29,6 +31,7 @@ CONFIG_CLASSIC32=y # CONFIG_PPC_82xx is not set # CONFIG_PPC_83xx is not set # CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set # CONFIG_40x is not set # CONFIG_44x is not set # CONFIG_8xx is not set @@ -39,6 +42,7 @@ CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y CONFIG_PPC_STD_MMU_32=y # CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -56,6 +60,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y @@ -72,10 +77,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -119,7 +126,9 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_APUS is not set # CONFIG_PPC_CHRP is not set CONFIG_PPC_PMAC=y -CONFIG_MPIC=y +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set CONFIG_PPC_MPC106=y @@ -140,6 +149,7 @@ CONFIG_CPU_FREQ_PMAC=y CONFIG_PPC601_SYNC_FIX=y # CONFIG_TAU is not set # CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y # # Kernel options @@ -154,6 +164,7 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # CONFIG_KEXEC is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y @@ -164,6 +175,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_PM=y @@ -178,10 +190,12 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set CONFIG_PPC_INDIRECT_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -256,6 +270,8 @@ CONFIG_INET_ESP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -268,6 +284,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -292,9 +309,11 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -313,6 +332,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m CONFIG_IP_NF_PPTP=m CONFIG_IP_NF_H323=m +# CONFIG_IP_NF_SIP is not set # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_IPRANGE=m @@ -457,6 +477,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_ALI_FIR is not set # CONFIG_VLSI_FIR is not set # CONFIG_VIA_FIR is not set +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -500,6 +521,7 @@ CONFIG_WIRELESS_EXT=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -539,6 +561,7 @@ CONFIG_BLK_DEV_UB=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -600,7 +623,6 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -CONFIG_BLK_DEV_IDE_PMAC_BLINK=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -661,6 +683,7 @@ CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -705,9 +728,7 @@ CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=m -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=m @@ -750,7 +771,6 @@ CONFIG_IEEE1394_OHCI1394=m # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set # CONFIG_IEEE1394_ETH1394 is not set CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=m @@ -766,9 +786,12 @@ CONFIG_IEEE1394_RAWIO=m CONFIG_ADB=y CONFIG_ADB_CUDA=y CONFIG_ADB_PMU=y +CONFIG_ADB_PMU_LED=y +CONFIG_ADB_PMU_LED_IDE=y CONFIG_PMAC_APM_EMU=m CONFIG_PMAC_MEDIABAY=y CONFIG_PMAC_BACKLIGHT=y +CONFIG_PMAC_BACKLIGHT_LEGACY=y CONFIG_INPUT_ADBHID=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_THERM_WINDTUNNEL=m @@ -858,6 +881,7 @@ CONFIG_PCNET32=y # CONFIG_CHELSIO_T1 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -908,6 +932,7 @@ CONFIG_APPLE_AIRPORT=m # Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support # CONFIG_PRISM54=m +# CONFIG_USB_ZD1201 is not set # CONFIG_HOSTAP is not set CONFIG_NET_WIRELESS=y @@ -998,6 +1023,7 @@ CONFIG_SERIO=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -1029,6 +1055,7 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set @@ -1040,6 +1067,7 @@ CONFIG_GEN_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=m +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_UNINORTH=m CONFIG_DRM=m @@ -1092,6 +1120,7 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_POWERMAC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set @@ -1156,12 +1185,13 @@ CONFIG_VIDEO_V4L2=y # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +CONFIG_FB_BACKLIGHT=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set @@ -1178,6 +1208,7 @@ CONFIG_FB_IMSTT=y # CONFIG_FB_S1D13XXX is not set CONFIG_FB_NVIDIA=y CONFIG_FB_NVIDIA_I2C=y +CONFIG_FB_NVIDIA_BACKLIGHT=y # CONFIG_FB_RIVA is not set CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y @@ -1187,12 +1218,15 @@ CONFIG_FB_MATROX_MYSTIQUE=y # CONFIG_FB_MATROX_MULTIHEAD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_RADEON_DEBUG is not set CONFIG_FB_ATY128=y +CONFIG_FB_ATY128_BACKLIGHT=y CONFIG_FB_ATY=y CONFIG_FB_ATY_CT=y # CONFIG_FB_ATY_GENERIC_LCD is not set CONFIG_FB_ATY_GX=y +CONFIG_FB_ATY_BACKLIGHT=y # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set @@ -1221,7 +1255,11 @@ CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_DEVICE=y # # Sound @@ -1278,6 +1316,18 @@ CONFIG_SND_DUMMY=m # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1315,6 +1365,17 @@ CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y # +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + +# # USB devices # CONFIG_SND_USB_AUDIO=m @@ -1355,6 +1416,7 @@ CONFIG_USB_DYNAMIC_MINORS=y CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1431,7 +1493,6 @@ CONFIG_USB_NET_NET1080=m # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set CONFIG_USB_MON=y # @@ -1444,7 +1505,6 @@ CONFIG_USB_MON=y CONFIG_USB_SERIAL=m # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set @@ -1482,6 +1542,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set @@ -1499,10 +1560,12 @@ CONFIG_USB_EZUSB=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1524,7 +1587,8 @@ CONFIG_USB_EZUSB=y # # LED devices # -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # # LED drivers @@ -1533,6 +1597,10 @@ CONFIG_USB_EZUSB=y # # LED Triggers # +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LEDS_TRIGGER_IDE_DISK=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # # InfiniBand support @@ -1549,6 +1617,19 @@ CONFIG_USB_EZUSB=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1569,6 +1650,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1732,6 +1814,7 @@ CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1744,14 +1827,19 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set @@ -1763,11 +1851,7 @@ CONFIG_XMON=y CONFIG_XMON_DEFAULT=y # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 395e49847788..7517d0c5303f 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,15 +1,18 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.16-rc2 -# Fri Feb 10 17:32:14 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:45:11 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_COMPAT=y @@ -30,8 +33,10 @@ CONFIG_POWER4=y CONFIG_PPC_FPU=y CONFIG_ALTIVEC=y CONFIG_PPC_STD_MMU=y +CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=32 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -49,11 +54,14 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y CONFIG_SYSCTL=y # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CPUSETS=y +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y # CONFIG_EMBEDDED is not set @@ -65,14 +73,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -83,7 +89,6 @@ CONFIG_BASE_SMALL=0 CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y @@ -92,6 +97,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +CONFIG_BLK_DEV_IO_TRACE=y # # IO Schedulers @@ -117,19 +123,22 @@ CONFIG_PPC_PSERIES=y CONFIG_PPC_PMAC=y CONFIG_PPC_PMAC64=y CONFIG_PPC_MAPLE=y -# CONFIG_PPC_CELL is not set +CONFIG_PPC_CELL=y +CONFIG_PPC_CELL_NATIVE=y +CONFIG_PPC_IBM_CELL_BLADE=y +CONFIG_UDBG_RTAS_CONSOLE=y CONFIG_XICS=y CONFIG_U3_DART=y -CONFIG_MPIC=y CONFIG_PPC_RTAS=y CONFIG_RTAS_ERROR_LOGGING=y CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m -# CONFIG_MMIO_NVRAM is not set +CONFIG_MMIO_NVRAM=y CONFIG_MPIC_BROKEN_U3=y CONFIG_IBMVIO=y # CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set +CONFIG_PPC_970_NAP=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set @@ -144,6 +153,15 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_PMAC64=y # CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y + +# +# Cell Broadband Engine options +# +CONFIG_SPU_FS=m +CONFIG_SPU_BASE=y +CONFIG_SPUFS_MMAP=y +CONFIG_CBE_RAS=y # # Kernel options @@ -161,6 +179,7 @@ CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -181,9 +200,10 @@ CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_EXTREME=y -# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_MEMORY_HOTPLUG=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y +CONFIG_ARCH_MEMORY_PROBE=y # CONFIG_PPC_64K_PAGES is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -196,11 +216,12 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -247,7 +268,10 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_AH=m CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -258,6 +282,9 @@ CONFIG_TCP_CONG_BIC=y # # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -284,6 +311,8 @@ CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set +# CONFIG_IP_NF_H323 is not set +CONFIG_IP_NF_SIP=m CONFIG_IP_NF_QUEUE=m # @@ -339,6 +368,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -376,6 +406,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -436,7 +467,6 @@ CONFIG_BLK_DEV_AMD74XX=y CONFIG_BLK_DEV_IDE_PMAC=y CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y CONFIG_BLK_DEV_IDEDMA_PMAC=y -# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set @@ -497,6 +527,7 @@ CONFIG_SCSI_SATA_SVW=y # CONFIG_SCSI_SATA_MV is not set # CONFIG_SCSI_SATA_NV is not set # CONFIG_SCSI_PDC_ADMA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_SATA_QSTOR is not set # CONFIG_SCSI_SATA_PROMISE is not set # CONFIG_SCSI_SATA_SX4 is not set @@ -519,11 +550,10 @@ CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set +CONFIG_SCSI_SYM53C8XX_MMIO=y CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y -# CONFIG_SCSI_QLOGIC_FC is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set CONFIG_SCSI_LPFC=m @@ -540,8 +570,8 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=y -CONFIG_MD_RAID5=y -CONFIG_MD_RAID6=m +CONFIG_MD_RAID456=y +CONFIG_MD_RAID5_RESHAPE=y CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -585,7 +615,6 @@ CONFIG_IEEE1394_OHCI1394=y # CONFIG_IEEE1394_VIDEO1394=m CONFIG_IEEE1394_SBP2=m -# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set CONFIG_IEEE1394_ETH1394=m CONFIG_IEEE1394_DV1394=m CONFIG_IEEE1394_RAWIO=y @@ -599,6 +628,7 @@ CONFIG_IEEE1394_RAWIO=y # Macintosh device drivers # CONFIG_ADB_PMU=y +# CONFIG_ADB_PMU_LED is not set CONFIG_PMAC_SMU=y CONFIG_THERM_PM72=y CONFIG_WINDFARM=y @@ -682,6 +712,7 @@ CONFIG_E1000=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set +CONFIG_SPIDER_NET=m # CONFIG_MV643XX_ETH is not set # @@ -691,6 +722,7 @@ CONFIG_TIGON3=y CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set # CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -792,6 +824,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -799,6 +832,7 @@ CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -814,7 +848,9 @@ CONFIG_SERIAL_ICOM=m CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +CONFIG_HVC_DRIVER=y CONFIG_HVC_CONSOLE=y +CONFIG_HVC_RTAS=y CONFIG_HVCS=m # @@ -826,7 +862,7 @@ CONFIG_HVCS=m # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_RTC is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -874,10 +910,10 @@ CONFIG_I2C_AMD8111=y # CONFIG_I2C_PIIX4 is not set CONFIG_I2C_POWERMAC=y # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set @@ -896,9 +932,7 @@ CONFIG_I2C_POWERMAC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -913,7 +947,6 @@ CONFIG_I2C_POWERMAC=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -926,37 +959,33 @@ CONFIG_I2C_POWERMAC=y # # -# Multimedia Capabilities Port drivers -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CONTROL is not set -# CONFIG_FB_PLATINUM is not set -# CONFIG_FB_VALKYRIE is not set -# CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set @@ -970,7 +999,6 @@ CONFIG_FB_MATROX_G=y CONFIG_FB_MATROX_I2C=m CONFIG_FB_MATROX_MAVEN=m CONFIG_FB_MATROX_MULTIHEAD=y -# CONFIG_FB_RADEON_OLD is not set CONFIG_FB_RADEON=y CONFIG_FB_RADEON_I2C=y # CONFIG_FB_RADEON_DEBUG is not set @@ -1025,9 +1053,11 @@ CONFIG_SND_SEQ_DUMMY=m CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set @@ -1044,6 +1074,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # PCI devices # # CONFIG_SND_AD1889 is not set +# CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ATIIXP is not set @@ -1057,6 +1088,18 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_CMIPCI is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set +# CONFIG_SND_DARLA20 is not set +# CONFIG_SND_GINA20 is not set +# CONFIG_SND_LAYLA20 is not set +# CONFIG_SND_DARLA24 is not set +# CONFIG_SND_GINA24 is not set +# CONFIG_SND_LAYLA24 is not set +# CONFIG_SND_MONA is not set +# CONFIG_SND_MIA is not set +# CONFIG_SND_ECHO3G is not set +# CONFIG_SND_INDIGO is not set +# CONFIG_SND_INDIGOIO is not set +# CONFIG_SND_INDIGODJ is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set @@ -1076,6 +1119,7 @@ CONFIG_SND_SUPPORT_OLD_API=y # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set +# CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set @@ -1093,6 +1137,17 @@ CONFIG_SND_POWERMAC=m CONFIG_SND_POWERMAC_AUTO_DRC=y # +# Apple Onboard Audio driver +# +CONFIG_SND_AOA=m +CONFIG_SND_AOA_FABRIC_LAYOUT=m +CONFIG_SND_AOA_ONYX=m +CONFIG_SND_AOA_TAS=m +CONFIG_SND_AOA_TOONIE=m +CONFIG_SND_AOA_SOUNDBUS=m +CONFIG_SND_AOA_SOUNDBUS_I2S=m + +# # USB devices # # CONFIG_SND_USB_AUDIO is not set @@ -1108,6 +1163,7 @@ CONFIG_SND_POWERMAC_AUTO_DRC=y # CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set @@ -1125,6 +1181,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1135,7 +1192,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set @@ -1173,9 +1229,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ACECAD is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set -# CONFIG_USB_MTOUCH is not set -# CONFIG_USB_ITMTOUCH is not set -# CONFIG_USB_EGALAX is not set +# CONFIG_USB_TOUCHSCREEN is not set # CONFIG_USB_YEALINK is not set # CONFIG_USB_XPAD is not set # CONFIG_USB_ATI_REMOTE is not set @@ -1190,15 +1244,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_MICROTEK is not set # -# USB Multimedia devices -# -# CONFIG_USB_DABUSB is not set - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1227,10 +1272,12 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1250,23 +1297,53 @@ CONFIG_USB_HIDDEV=y # CONFIG_MMC is not set # +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# # InfiniBand support # CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set # CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m -# CONFIG_INFINIBAND_MTHCA_DEBUG is not set +CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_DEBUG is not set +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set # CONFIG_INFINIBAND_SRP is not set +CONFIG_INFINIBAND_ISER=m # -# SN Devices +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) # # -# EDAC - error detection and reporting (RAS) +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices # # @@ -1298,7 +1375,6 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y @@ -1307,6 +1383,7 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y @@ -1342,7 +1419,6 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set # CONFIG_CONFIGFS_FS is not set # @@ -1388,8 +1464,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1470,6 +1548,9 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1483,14 +1564,19 @@ CONFIG_OPROFILE=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y @@ -1504,11 +1590,7 @@ CONFIG_XMON=y # CONFIG_XMON_DEFAULT is not set CONFIG_IRQSTACKS=y CONFIG_BOOTX_TEXT=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 31708ad4574e..a8cdf312e1b0 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc4 -# Sun May 28 07:26:56 2006 +# Linux kernel version: 2.6.18-rc6 +# Sun Sep 10 10:45:12 2006 # CONFIG_PPC64=y CONFIG_64BIT=y CONFIG_PPC_MERGE=y CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y @@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_SMP=y CONFIG_NR_CPUS=128 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -52,6 +54,7 @@ CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set CONFIG_SYSCTL=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y @@ -70,10 +73,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y +CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -118,9 +123,11 @@ CONFIG_PPC_PSERIES=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_UDBG_RTAS_CONSOLE is not set CONFIG_XICS=y # CONFIG_U3_DART is not set -CONFIG_MPIC=y CONFIG_PPC_RTAS=y CONFIG_RTAS_ERROR_LOGGING=y CONFIG_RTAS_PROC=y @@ -132,6 +139,7 @@ CONFIG_IBMEBUS=y # CONFIG_PPC_970_NAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_WANT_EARLY_SERIAL is not set +CONFIG_MPIC=y # # Kernel options @@ -149,6 +157,7 @@ CONFIG_BINFMT_MISC=m CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_IOMMU_VMERGE=y CONFIG_HOTPLUG_CPU=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y @@ -173,6 +182,7 @@ CONFIG_SPARSEMEM_EXTREME=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y @@ -186,10 +196,12 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set CONFIG_PPC_I8259=y # CONFIG_PPC_INDIRECT_PCI is not set CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_PCI_DEBUG is not set # @@ -238,6 +250,8 @@ CONFIG_INET_ESP=m CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=y +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -250,6 +264,7 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -277,6 +292,7 @@ CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_PPTP is not set # CONFIG_IP_NF_H323 is not set +# CONFIG_IP_NF_SIP is not set CONFIG_IP_NF_QUEUE=m # @@ -316,6 +332,7 @@ CONFIG_LLC=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -332,6 +349,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -352,6 +370,7 @@ CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set # CONFIG_PARPORT_1284 is not set # @@ -376,6 +395,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -487,6 +507,7 @@ CONFIG_SCSI_SAS_ATTRS=m # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set @@ -508,12 +529,6 @@ CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_1280 is not set CONFIG_SCSI_QLA_FC=m -CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y -CONFIG_SCSI_QLA21XX=m -CONFIG_SCSI_QLA22XX=m -CONFIG_SCSI_QLA2300=m -CONFIG_SCSI_QLA2322=m -CONFIG_SCSI_QLA24XX=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -528,9 +543,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -CONFIG_MD_RAID5=y -CONFIG_MD_RAID5_RESHAPE=y -CONFIG_MD_RAID6=m +# CONFIG_MD_RAID456 is not set CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -651,6 +664,7 @@ CONFIG_IXGB=m # CONFIG_IXGB_NAPI is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -754,6 +768,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -793,6 +808,7 @@ CONFIG_HVCS=m # Watchdog Cards # # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set @@ -839,6 +855,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_I810 is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_PROSAVAGE is not set @@ -876,7 +893,6 @@ CONFIG_I2C_ALGOBIT=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -892,6 +908,7 @@ CONFIG_I2C_ALGOBIT=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -902,19 +919,19 @@ CONFIG_I2C_ALGOBIT=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_MACMODES=y -CONFIG_FB_FIRMWARE_EDID=y +# CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set CONFIG_FB_OF=y -# CONFIG_FB_CT65550 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set @@ -993,6 +1010,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1083,10 +1101,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_PHIDGETKIT is not set # CONFIG_USB_PHIDGETSERVO is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TEST is not set @@ -1124,12 +1144,14 @@ CONFIG_USB_MON=y CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m +# CONFIG_INFINIBAND_ISER is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -1141,6 +1163,19 @@ CONFIG_INFINIBAND_SRP=m # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -1169,15 +1204,16 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m -CONFIG_XFS_EXPORT=y # CONFIG_XFS_QUOTA is not set CONFIG_XFS_SECURITY=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set CONFIG_OCFS2_FS=m +CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set @@ -1259,8 +1295,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m # CONFIG_SMB_FS is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set CONFIG_CIFS_XATTR=y CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1326,6 +1364,9 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_PLIST=y # # Instrumentation Support @@ -1339,14 +1380,19 @@ CONFIG_KPROBES=y # # CONFIG_PRINTK_TIME is not set CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 814f242aeb8c..7d32ad0194a4 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -67,9 +67,11 @@ pci64-$(CONFIG_PPC64) += pci_64.o pci_dn.o pci_iommu.o \ pci_direct_iommu.o iomap.o pci32-$(CONFIG_PPC32) := pci_32.o obj-$(CONFIG_PCI) += $(pci64-y) $(pci32-y) -kexec-$(CONFIG_PPC64) := machine_kexec_64.o crash.o +kexec-$(CONFIG_PPC64) := machine_kexec_64.o kexec-$(CONFIG_PPC32) := machine_kexec_32.o -obj-$(CONFIG_KEXEC) += machine_kexec.o $(kexec-y) +obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o $(kexec-y) +obj-$(CONFIG_AUDIT) += audit.o +obj64-$(CONFIG_AUDIT) += compat_audit.o ifeq ($(CONFIG_PPC_ISERIES),y) $(obj)/head_64.o: $(obj)/lparmap.s diff --git a/arch/powerpc/kernel/audit.c b/arch/powerpc/kernel/audit.c new file mode 100644 index 000000000000..7fe5e6300e9a --- /dev/null +++ b/arch/powerpc/kernel/audit.c @@ -0,0 +1,66 @@ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/audit.h> +#include <asm/unistd.h> + +static unsigned dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +static unsigned read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +static unsigned write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +static unsigned chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +int audit_classify_syscall(int abi, unsigned syscall) +{ +#ifdef CONFIG_PPC64 + extern int ppc32_classify_syscall(unsigned); + if (abi == AUDIT_ARCH_PPC) + return ppc32_classify_syscall(syscall); +#endif + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 0; + } +} + +static int __init audit_classes_init(void) +{ +#ifdef CONFIG_PPC64 + extern __u32 ppc32_dir_class[]; + extern __u32 ppc32_write_class[]; + extern __u32 ppc32_read_class[]; + extern __u32 ppc32_chattr_class[]; + audit_register_class(AUDIT_CLASS_WRITE_32, ppc32_write_class); + audit_register_class(AUDIT_CLASS_READ_32, ppc32_read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ppc32_dir_class); + audit_register_class(AUDIT_CLASS_CHATTR_32, ppc32_chattr_class); +#endif + audit_register_class(AUDIT_CLASS_WRITE, write_class); + audit_register_class(AUDIT_CLASS_READ, read_class); + audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class); + audit_register_class(AUDIT_CLASS_CHATTR, chattr_class); + return 0; +} + +__initcall(audit_classes_init); diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index a6920919d68e..f4e5e14ee2b6 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -111,7 +111,7 @@ void __init btext_setup_display(int width, int height, int depth, int pitch, logicalDisplayBase = (unsigned char *)address; dispDeviceBase = (unsigned char *)address; dispDeviceRowBytes = pitch; - dispDeviceDepth = depth; + dispDeviceDepth = depth == 15 ? 16 : depth; dispDeviceRect[0] = dispDeviceRect[1] = 0; dispDeviceRect[2] = width; dispDeviceRect[3] = height; @@ -160,20 +160,28 @@ int btext_initialize(struct device_node *np) unsigned long address = 0; u32 *prop; - prop = (u32 *)get_property(np, "width", NULL); + prop = (u32 *)get_property(np, "linux,bootx-width", NULL); + if (prop == NULL) + prop = (u32 *)get_property(np, "width", NULL); if (prop == NULL) return -EINVAL; width = *prop; - prop = (u32 *)get_property(np, "height", NULL); + prop = (u32 *)get_property(np, "linux,bootx-height", NULL); + if (prop == NULL) + prop = (u32 *)get_property(np, "height", NULL); if (prop == NULL) return -EINVAL; height = *prop; - prop = (u32 *)get_property(np, "depth", NULL); + prop = (u32 *)get_property(np, "linux,bootx-depth", NULL); + if (prop == NULL) + prop = (u32 *)get_property(np, "depth", NULL); if (prop == NULL) return -EINVAL; depth = *prop; pitch = width * ((depth + 7) / 8); - prop = (u32 *)get_property(np, "linebytes", NULL); + prop = (u32 *)get_property(np, "linux,bootx-linebytes", NULL); + if (prop == NULL) + prop = (u32 *)get_property(np, "linebytes", NULL); if (prop) pitch = *prop; if (pitch == 1) @@ -194,7 +202,7 @@ int btext_initialize(struct device_node *np) g_max_loc_Y = height / 16; dispDeviceBase = (unsigned char *)address; dispDeviceRowBytes = pitch; - dispDeviceDepth = depth; + dispDeviceDepth = depth == 15 ? 16 : depth; dispDeviceRect[0] = dispDeviceRect[1] = 0; dispDeviceRect[2] = width; dispDeviceRect[3] = height; diff --git a/arch/powerpc/kernel/compat_audit.c b/arch/powerpc/kernel/compat_audit.c new file mode 100644 index 000000000000..640d4bb29321 --- /dev/null +++ b/arch/powerpc/kernel/compat_audit.c @@ -0,0 +1,38 @@ +#undef __powerpc64__ +#include <asm/unistd.h> + +unsigned ppc32_dir_class[] = { +#include <asm-generic/audit_dir_write.h> +~0U +}; + +unsigned ppc32_chattr_class[] = { +#include <asm-generic/audit_change_attr.h> +~0U +}; + +unsigned ppc32_write_class[] = { +#include <asm-generic/audit_write.h> +~0U +}; + +unsigned ppc32_read_class[] = { +#include <asm-generic/audit_read.h> +~0U +}; + +int ppc32_classify_syscall(unsigned syscall) +{ + switch(syscall) { + case __NR_open: + return 2; + case __NR_openat: + return 3; + case __NR_socketcall: + return 4; + case __NR_execve: + return 5; + default: + return 1; + } +} diff --git a/arch/powerpc/kernel/cpu_setup_power4.S b/arch/powerpc/kernel/cpu_setup_power4.S index f69af2c5d7b3..76e97aa71c45 100644 --- a/arch/powerpc/kernel/cpu_setup_power4.S +++ b/arch/powerpc/kernel/cpu_setup_power4.S @@ -76,6 +76,8 @@ _GLOBAL(__setup_cpu_ppc970) mfspr r0,SPRN_HID0 li r11,5 /* clear DOZE and SLEEP */ rldimi r0,r11,52,8 /* set NAP and DPM */ + li r11,0 + rldimi r0,r11,32,31 /* clear EN_ATTN */ mtspr SPRN_HID0,r0 mfspr r0,SPRN_HID0 mfspr r0,SPRN_HID0 diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 358cecdc6aef..1af41f7616dc 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -44,6 +44,7 @@ /* This keeps a track of which one is crashing cpu. */ int crashing_cpu = -1; static cpumask_t cpus_in_crash = CPU_MASK_NONE; +cpumask_t cpus_in_sr = CPU_MASK_NONE; static u32 *append_elf_note(u32 *buf, char *name, unsigned type, void *data, size_t data_len) @@ -139,7 +140,13 @@ void crash_ipi_callback(struct pt_regs *regs) if (ppc_md.kexec_cpu_down) ppc_md.kexec_cpu_down(1, 1); + +#ifdef CONFIG_PPC64 kexec_smp_wait(); +#else + for (;;); /* FIXME */ +#endif + /* NOTREACHED */ } @@ -255,7 +262,11 @@ static void crash_kexec_prepare_cpus(int cpu) * * do this if kexec in setup.c ? */ +#ifdef CONFIG_PPC64 smp_release_cpus(); +#else + /* FIXME */ +#endif } void crash_kexec_secondary(struct pt_regs *regs) @@ -284,7 +295,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs) struct irq_desc *desc = irq_desc + irq; if (desc->status & IRQ_INPROGRESS) - desc->chip->end(irq); + desc->chip->eoi(irq); if (!(desc->status & IRQ_DISABLED)) desc->chip->disable(irq); diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S index 7e2c9fe44ac1..821e152e093c 100644 --- a/arch/powerpc/kernel/fpu.S +++ b/arch/powerpc/kernel/fpu.S @@ -2,6 +2,11 @@ * FPU support code, moved here from head.S so that it can be used * by chips which use other head-whatever.S files. * + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> + * Copyright (C) 1996 Paul Mackerras. + * Copyright (C) 1997 Dan Malek (dmalek@jlc.net). + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index e16eb2a33173..6ff3cf506088 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -191,6 +191,37 @@ exception_marker: ori reg,reg,(label)@l; /* virt addr of handler ... */ #endif +/* + * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode. + * The firmware calls the registered system_reset_fwnmi and + * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run + * a 32bit application at the time of the event. + * This firmware bug is present on POWER4 and JS20. + */ +#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label) \ + mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ + std r9,area+EX_R9(r13); /* save r9 - r12 */ \ + std r10,area+EX_R10(r13); \ + std r11,area+EX_R11(r13); \ + std r12,area+EX_R12(r13); \ + mfspr r9,SPRN_SPRG1; \ + std r9,area+EX_R13(r13); \ + mfcr r9; \ + clrrdi r12,r13,32; /* get high part of &label */ \ + mfmsr r10; \ + /* force 64bit mode */ \ + li r11,5; /* MSR_SF_LG|MSR_ISF_LG */ \ + rldimi r10,r11,61,0; /* insert into top 3 bits */ \ + /* done 64bit mode */ \ + mfspr r11,SPRN_SRR0; /* save SRR0 */ \ + LOAD_HANDLER(r12,label) \ + ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ + mtspr SPRN_SRR0,r12; \ + mfspr r12,SPRN_SRR1; /* and SRR1 */ \ + mtspr SPRN_SRR1,r10; \ + rfid; \ + b . /* prevent speculative execution */ + #define EXCEPTION_PROLOG_PSERIES(area, label) \ mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ std r9,area+EX_R9(r13); /* save r9 - r12 */ \ @@ -604,14 +635,14 @@ slb_miss_user_pseries: system_reset_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXGEN, system_reset_common) .globl machine_check_fwnmi .align 7 machine_check_fwnmi: HMT_MEDIUM mtspr SPRN_SPRG1,r13 /* save r13 */ - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) + EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(PACA_EXMC, machine_check_common) #ifdef CONFIG_PPC_ISERIES /*** ISeries-LPAR interrupt handlers ***/ diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index e47d40ac6f39..68e5ab0443d2 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -323,13 +323,11 @@ int ibmebus_request_irq(struct ibmebus_dev *dev, unsigned long irq_flags, const char * devname, void *dev_id) { - unsigned int irq = virt_irq_create_mapping(ist); + unsigned int irq = irq_create_mapping(NULL, ist); if (irq == NO_IRQ) return -EINVAL; - irq = irq_offset_up(irq); - return request_irq(irq, handler, irq_flags, devname, dev_id); } @@ -337,12 +335,9 @@ EXPORT_SYMBOL(ibmebus_request_irq); void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id) { - unsigned int irq = virt_irq_create_mapping(ist); + unsigned int irq = irq_find_mapping(NULL, ist); - irq = irq_offset_up(irq); free_irq(irq, dev_id); - - return; } EXPORT_SYMBOL(ibmebus_free_irq); diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 525baab45d2d..12c5971d6565 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -29,6 +29,8 @@ * to reduce code space and undefined function references. */ +#undef DEBUG + #include <linux/module.h> #include <linux/threads.h> #include <linux/kernel_stat.h> @@ -46,7 +48,10 @@ #include <linux/cpumask.h> #include <linux/profile.h> #include <linux/bitops.h> -#include <linux/pci.h> +#include <linux/list.h> +#include <linux/radix-tree.h> +#include <linux/mutex.h> +#include <linux/bootmem.h> #include <asm/uaccess.h> #include <asm/system.h> @@ -57,39 +62,38 @@ #include <asm/prom.h> #include <asm/ptrace.h> #include <asm/machdep.h> +#include <asm/udbg.h> #ifdef CONFIG_PPC_ISERIES #include <asm/paca.h> #endif int __irq_offset_value; -#ifdef CONFIG_PPC32 -EXPORT_SYMBOL(__irq_offset_value); -#endif - static int ppc_spurious_interrupts; #ifdef CONFIG_PPC32 -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) +EXPORT_SYMBOL(__irq_offset_value); +atomic_t ppc_n_lost_interrupts; +#ifndef CONFIG_PPC_MERGE +#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; -atomic_t ppc_n_lost_interrupts; +#endif #ifdef CONFIG_TAU_INT extern int tau_initialized; extern int tau_interrupts(int); #endif +#endif /* CONFIG_PPC32 */ #if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE) extern atomic_t ipi_recv; extern atomic_t ipi_sent; #endif -#endif /* CONFIG_PPC32 */ #ifdef CONFIG_PPC64 EXPORT_SYMBOL(irq_desc); int distribute_irqs = 1; -u64 ppc64_interrupt_controller; #endif /* CONFIG_PPC64 */ int show_interrupts(struct seq_file *p, void *v) @@ -182,7 +186,7 @@ void fixup_irqs(cpumask_t map) void do_IRQ(struct pt_regs *regs) { - int irq; + unsigned int irq; #ifdef CONFIG_IRQSTACKS struct thread_info *curtp, *irqtp; #endif @@ -213,22 +217,26 @@ void do_IRQ(struct pt_regs *regs) */ irq = ppc_md.get_irq(regs); - if (irq >= 0) { + if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) { #ifdef CONFIG_IRQSTACKS /* Switch to the irq stack to handle this */ curtp = current_thread_info(); irqtp = hardirq_ctx[smp_processor_id()]; if (curtp != irqtp) { + struct irq_desc *desc = irq_desc + irq; + void *handler = desc->handle_irq; + if (handler == NULL) + handler = &__do_IRQ; irqtp->task = curtp->task; irqtp->flags = 0; - call___do_IRQ(irq, regs, irqtp); + call_handle_irq(irq, desc, regs, irqtp, handler); irqtp->task = NULL; if (irqtp->flags) set_bits(irqtp->flags, &curtp->flags); } else #endif - __do_IRQ(irq, regs); - } else if (irq != -2) + generic_handle_irq(irq, regs); + } else if (irq != NO_IRQ_IGNORE) /* That's not SMP safe ... but who cares ? */ ppc_spurious_interrupts++; @@ -245,196 +253,619 @@ void do_IRQ(struct pt_regs *regs) void __init init_IRQ(void) { + ppc_md.init_IRQ(); #ifdef CONFIG_PPC64 - static int once = 0; + irq_ctx_init(); +#endif +} + + +#ifdef CONFIG_IRQSTACKS +struct thread_info *softirq_ctx[NR_CPUS] __read_mostly; +struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly; + +void irq_ctx_init(void) +{ + struct thread_info *tp; + int i; + + for_each_possible_cpu(i) { + memset((void *)softirq_ctx[i], 0, THREAD_SIZE); + tp = softirq_ctx[i]; + tp->cpu = i; + tp->preempt_count = SOFTIRQ_OFFSET; + + memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); + tp = hardirq_ctx[i]; + tp->cpu = i; + tp->preempt_count = HARDIRQ_OFFSET; + } +} + +static inline void do_softirq_onstack(void) +{ + struct thread_info *curtp, *irqtp; + + curtp = current_thread_info(); + irqtp = softirq_ctx[smp_processor_id()]; + irqtp->task = curtp->task; + call_do_softirq(irqtp); + irqtp->task = NULL; +} + +#else +#define do_softirq_onstack() __do_softirq() +#endif /* CONFIG_IRQSTACKS */ - if (once) +void do_softirq(void) +{ + unsigned long flags; + + if (in_interrupt()) return; - once++; + local_irq_save(flags); + + if (local_softirq_pending()) + do_softirq_onstack(); -#endif - ppc_md.init_IRQ(); -#ifdef CONFIG_PPC64 - irq_ctx_init(); -#endif + local_irq_restore(flags); } +EXPORT_SYMBOL(do_softirq); + -#ifdef CONFIG_PPC64 /* - * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. + * IRQ controller and virtual interrupts */ -#define UNDEFINED_IRQ 0xffffffff -unsigned int virt_irq_to_real_map[NR_IRQS]; +#ifdef CONFIG_PPC_MERGE -/* - * Don't use virtual irqs 0, 1, 2 for devices. - * The pcnet32 driver considers interrupt numbers < 2 to be invalid, - * and 2 is the XICS IPI interrupt. - * We limit virtual irqs to __irq_offet_value less than virt_irq_max so - * that when we offset them we don't end up with an interrupt - * number >= virt_irq_max. - */ -#define MIN_VIRT_IRQ 3 +static LIST_HEAD(irq_hosts); +static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_PER_CPU(unsigned int, irq_radix_reader); +static unsigned int irq_radix_writer; +struct irq_map_entry irq_map[NR_IRQS]; +static unsigned int irq_virq_count = NR_IRQS; +static struct irq_host *irq_default_host; + +struct irq_host *irq_alloc_host(unsigned int revmap_type, + unsigned int revmap_arg, + struct irq_host_ops *ops, + irq_hw_number_t inval_irq) +{ + struct irq_host *host; + unsigned int size = sizeof(struct irq_host); + unsigned int i; + unsigned int *rmap; + unsigned long flags; + + /* Allocate structure and revmap table if using linear mapping */ + if (revmap_type == IRQ_HOST_MAP_LINEAR) + size += revmap_arg * sizeof(unsigned int); + if (mem_init_done) + host = kzalloc(size, GFP_KERNEL); + else { + host = alloc_bootmem(size); + if (host) + memset(host, 0, size); + } + if (host == NULL) + return NULL; -unsigned int virt_irq_max; -static unsigned int max_virt_irq; -static unsigned int nr_virt_irqs; + /* Fill structure */ + host->revmap_type = revmap_type; + host->inval_irq = inval_irq; + host->ops = ops; -void -virt_irq_init(void) + spin_lock_irqsave(&irq_big_lock, flags); + + /* If it's a legacy controller, check for duplicates and + * mark it as allocated (we use irq 0 host pointer for that + */ + if (revmap_type == IRQ_HOST_MAP_LEGACY) { + if (irq_map[0].host != NULL) { + spin_unlock_irqrestore(&irq_big_lock, flags); + /* If we are early boot, we can't free the structure, + * too bad... + * this will be fixed once slab is made available early + * instead of the current cruft + */ + if (mem_init_done) + kfree(host); + return NULL; + } + irq_map[0].host = host; + } + + list_add(&host->link, &irq_hosts); + spin_unlock_irqrestore(&irq_big_lock, flags); + + /* Additional setups per revmap type */ + switch(revmap_type) { + case IRQ_HOST_MAP_LEGACY: + /* 0 is always the invalid number for legacy */ + host->inval_irq = 0; + /* setup us as the host for all legacy interrupts */ + for (i = 1; i < NUM_ISA_INTERRUPTS; i++) { + irq_map[i].hwirq = 0; + smp_wmb(); + irq_map[i].host = host; + smp_wmb(); + + /* Clear norequest flags */ + get_irq_desc(i)->status &= ~IRQ_NOREQUEST; + + /* Legacy flags are left to default at this point, + * one can then use irq_create_mapping() to + * explicitely change them + */ + ops->map(host, i, i); + } + break; + case IRQ_HOST_MAP_LINEAR: + rmap = (unsigned int *)(host + 1); + for (i = 0; i < revmap_arg; i++) + rmap[i] = IRQ_NONE; + host->revmap_data.linear.size = revmap_arg; + smp_wmb(); + host->revmap_data.linear.revmap = rmap; + break; + default: + break; + } + + pr_debug("irq: Allocated host of type %d @0x%p\n", revmap_type, host); + + return host; +} + +struct irq_host *irq_find_host(struct device_node *node) { - int i; + struct irq_host *h, *found = NULL; + unsigned long flags; - if ((virt_irq_max == 0) || (virt_irq_max > (NR_IRQS - 1))) - virt_irq_max = NR_IRQS - 1; - max_virt_irq = virt_irq_max - __irq_offset_value; - nr_virt_irqs = max_virt_irq - MIN_VIRT_IRQ + 1; + /* We might want to match the legacy controller last since + * it might potentially be set to match all interrupts in + * the absence of a device node. This isn't a problem so far + * yet though... + */ + spin_lock_irqsave(&irq_big_lock, flags); + list_for_each_entry(h, &irq_hosts, link) + if (h->ops->match == NULL || h->ops->match(h, node)) { + found = h; + break; + } + spin_unlock_irqrestore(&irq_big_lock, flags); + return found; +} +EXPORT_SYMBOL_GPL(irq_find_host); - for (i = 0; i < NR_IRQS; i++) - virt_irq_to_real_map[i] = UNDEFINED_IRQ; +void irq_set_default_host(struct irq_host *host) +{ + pr_debug("irq: Default host set to @0x%p\n", host); + + irq_default_host = host; } -/* Create a mapping for a real_irq if it doesn't already exist. - * Return the virtual irq as a convenience. +void irq_set_virq_count(unsigned int count) +{ + pr_debug("irq: Trying to set virq count to %d\n", count); + + BUG_ON(count < NUM_ISA_INTERRUPTS); + if (count < NR_IRQS) + irq_virq_count = count; +} + +/* radix tree not lockless safe ! we use a brlock-type mecanism + * for now, until we can use a lockless radix tree */ -int virt_irq_create_mapping(unsigned int real_irq) +static void irq_radix_wrlock(unsigned long *flags) { - unsigned int virq, first_virq; - static int warned; + unsigned int cpu, ok; - if (ppc64_interrupt_controller == IC_OPEN_PIC) - return real_irq; /* no mapping for openpic (for now) */ + spin_lock_irqsave(&irq_big_lock, *flags); + irq_radix_writer = 1; + smp_mb(); + do { + barrier(); + ok = 1; + for_each_possible_cpu(cpu) { + if (per_cpu(irq_radix_reader, cpu)) { + ok = 0; + break; + } + } + if (!ok) + cpu_relax(); + } while(!ok); +} - if (ppc64_interrupt_controller == IC_CELL_PIC) - return real_irq; /* no mapping for iic either */ +static void irq_radix_wrunlock(unsigned long flags) +{ + smp_wmb(); + irq_radix_writer = 0; + spin_unlock_irqrestore(&irq_big_lock, flags); +} - /* don't map interrupts < MIN_VIRT_IRQ */ - if (real_irq < MIN_VIRT_IRQ) { - virt_irq_to_real_map[real_irq] = real_irq; - return real_irq; +static void irq_radix_rdlock(unsigned long *flags) +{ + local_irq_save(*flags); + __get_cpu_var(irq_radix_reader) = 1; + smp_mb(); + if (likely(irq_radix_writer == 0)) + return; + __get_cpu_var(irq_radix_reader) = 0; + smp_wmb(); + spin_lock(&irq_big_lock); + __get_cpu_var(irq_radix_reader) = 1; + spin_unlock(&irq_big_lock); +} + +static void irq_radix_rdunlock(unsigned long flags) +{ + __get_cpu_var(irq_radix_reader) = 0; + local_irq_restore(flags); +} + + +unsigned int irq_create_mapping(struct irq_host *host, + irq_hw_number_t hwirq) +{ + unsigned int virq, hint; + + pr_debug("irq: irq_create_mapping(0x%p, 0x%lx)\n", host, hwirq); + + /* Look for default host if nececssary */ + if (host == NULL) + host = irq_default_host; + if (host == NULL) { + printk(KERN_WARNING "irq_create_mapping called for" + " NULL host, hwirq=%lx\n", hwirq); + WARN_ON(1); + return NO_IRQ; } + pr_debug("irq: -> using host @%p\n", host); - /* map to a number between MIN_VIRT_IRQ and max_virt_irq */ - virq = real_irq; - if (virq > max_virt_irq) - virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ; - - /* search for this number or a free slot */ - first_virq = virq; - while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) { - if (virt_irq_to_real_map[virq] == real_irq) - return virq; - if (++virq > max_virt_irq) - virq = MIN_VIRT_IRQ; - if (virq == first_virq) - goto nospace; /* oops, no free slots */ + /* Check if mapping already exist, if it does, call + * host->ops->map() to update the flags + */ + virq = irq_find_mapping(host, hwirq); + if (virq != IRQ_NONE) { + pr_debug("irq: -> existing mapping on virq %d\n", virq); + return virq; } - virt_irq_to_real_map[virq] = real_irq; + /* Get a virtual interrupt number */ + if (host->revmap_type == IRQ_HOST_MAP_LEGACY) { + /* Handle legacy */ + virq = (unsigned int)hwirq; + if (virq == 0 || virq >= NUM_ISA_INTERRUPTS) + return NO_IRQ; + return virq; + } else { + /* Allocate a virtual interrupt number */ + hint = hwirq % irq_virq_count; + virq = irq_alloc_virt(host, 1, hint); + if (virq == NO_IRQ) { + pr_debug("irq: -> virq allocation failed\n"); + return NO_IRQ; + } + } + pr_debug("irq: -> obtained virq %d\n", virq); + + /* Clear IRQ_NOREQUEST flag */ + get_irq_desc(virq)->status &= ~IRQ_NOREQUEST; + + /* map it */ + smp_wmb(); + irq_map[virq].hwirq = hwirq; + smp_mb(); + if (host->ops->map(host, virq, hwirq)) { + pr_debug("irq: -> mapping failed, freeing\n"); + irq_free_virt(virq, 1); + return NO_IRQ; + } return virq; +} +EXPORT_SYMBOL_GPL(irq_create_mapping); - nospace: - if (!warned) { - printk(KERN_CRIT "Interrupt table is full\n"); - printk(KERN_CRIT "Increase virt_irq_max (currently %d) " - "in your kernel sources and rebuild.\n", virt_irq_max); - warned = 1; +extern unsigned int irq_create_of_mapping(struct device_node *controller, + u32 *intspec, unsigned int intsize) +{ + struct irq_host *host; + irq_hw_number_t hwirq; + unsigned int type = IRQ_TYPE_NONE; + unsigned int virq; + + if (controller == NULL) + host = irq_default_host; + else + host = irq_find_host(controller); + if (host == NULL) { + printk(KERN_WARNING "irq: no irq host found for %s !\n", + controller->full_name); + return NO_IRQ; } - return NO_IRQ; + + /* If host has no translation, then we assume interrupt line */ + if (host->ops->xlate == NULL) + hwirq = intspec[0]; + else { + if (host->ops->xlate(host, controller, intspec, intsize, + &hwirq, &type)) + return NO_IRQ; + } + + /* Create mapping */ + virq = irq_create_mapping(host, hwirq); + if (virq == NO_IRQ) + return virq; + + /* Set type if specified and different than the current one */ + if (type != IRQ_TYPE_NONE && + type != (get_irq_desc(virq)->status & IRQF_TRIGGER_MASK)) + set_irq_type(virq, type); + return virq; } +EXPORT_SYMBOL_GPL(irq_create_of_mapping); -/* - * In most cases will get a hit on the very first slot checked in the - * virt_irq_to_real_map. Only when there are a large number of - * IRQs will this be expensive. - */ -unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) +unsigned int irq_of_parse_and_map(struct device_node *dev, int index) { - unsigned int virq; - unsigned int first_virq; + struct of_irq oirq; - virq = real_irq; + if (of_irq_map_one(dev, index, &oirq)) + return NO_IRQ; - if (virq > max_virt_irq) - virq = (virq % nr_virt_irqs) + MIN_VIRT_IRQ; + return irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); +} +EXPORT_SYMBOL_GPL(irq_of_parse_and_map); - first_virq = virq; +void irq_dispose_mapping(unsigned int virq) +{ + struct irq_host *host = irq_map[virq].host; + irq_hw_number_t hwirq; + unsigned long flags; - do { - if (virt_irq_to_real_map[virq] == real_irq) - return virq; + WARN_ON (host == NULL); + if (host == NULL) + return; - virq++; + /* Never unmap legacy interrupts */ + if (host->revmap_type == IRQ_HOST_MAP_LEGACY) + return; - if (virq >= max_virt_irq) - virq = 0; + /* remove chip and handler */ + set_irq_chip_and_handler(virq, NULL, NULL); + + /* Make sure it's completed */ + synchronize_irq(virq); + + /* Tell the PIC about it */ + if (host->ops->unmap) + host->ops->unmap(host, virq); + smp_mb(); + + /* Clear reverse map */ + hwirq = irq_map[virq].hwirq; + switch(host->revmap_type) { + case IRQ_HOST_MAP_LINEAR: + if (hwirq < host->revmap_data.linear.size) + host->revmap_data.linear.revmap[hwirq] = IRQ_NONE; + break; + case IRQ_HOST_MAP_TREE: + /* Check if radix tree allocated yet */ + if (host->revmap_data.tree.gfp_mask == 0) + break; + irq_radix_wrlock(&flags); + radix_tree_delete(&host->revmap_data.tree, hwirq); + irq_radix_wrunlock(flags); + break; + } - } while (first_virq != virq); + /* Destroy map */ + smp_mb(); + irq_map[virq].hwirq = host->inval_irq; - return NO_IRQ; + /* Set some flags */ + get_irq_desc(virq)->status |= IRQ_NOREQUEST; + /* Free it */ + irq_free_virt(virq, 1); } -#endif /* CONFIG_PPC64 */ +EXPORT_SYMBOL_GPL(irq_dispose_mapping); -#ifdef CONFIG_IRQSTACKS -struct thread_info *softirq_ctx[NR_CPUS] __read_mostly; -struct thread_info *hardirq_ctx[NR_CPUS] __read_mostly; +unsigned int irq_find_mapping(struct irq_host *host, + irq_hw_number_t hwirq) +{ + unsigned int i; + unsigned int hint = hwirq % irq_virq_count; + + /* Look for default host if nececssary */ + if (host == NULL) + host = irq_default_host; + if (host == NULL) + return NO_IRQ; + + /* legacy -> bail early */ + if (host->revmap_type == IRQ_HOST_MAP_LEGACY) + return hwirq; + + /* Slow path does a linear search of the map */ + if (hint < NUM_ISA_INTERRUPTS) + hint = NUM_ISA_INTERRUPTS; + i = hint; + do { + if (irq_map[i].host == host && + irq_map[i].hwirq == hwirq) + return i; + i++; + if (i >= irq_virq_count) + i = NUM_ISA_INTERRUPTS; + } while(i != hint); + return NO_IRQ; +} +EXPORT_SYMBOL_GPL(irq_find_mapping); -void irq_ctx_init(void) + +unsigned int irq_radix_revmap(struct irq_host *host, + irq_hw_number_t hwirq) { - struct thread_info *tp; - int i; + struct radix_tree_root *tree; + struct irq_map_entry *ptr; + unsigned int virq; + unsigned long flags; - for_each_possible_cpu(i) { - memset((void *)softirq_ctx[i], 0, THREAD_SIZE); - tp = softirq_ctx[i]; - tp->cpu = i; - tp->preempt_count = SOFTIRQ_OFFSET; + WARN_ON(host->revmap_type != IRQ_HOST_MAP_TREE); - memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); - tp = hardirq_ctx[i]; - tp->cpu = i; - tp->preempt_count = HARDIRQ_OFFSET; + /* Check if the radix tree exist yet. We test the value of + * the gfp_mask for that. Sneaky but saves another int in the + * structure. If not, we fallback to slow mode + */ + tree = &host->revmap_data.tree; + if (tree->gfp_mask == 0) + return irq_find_mapping(host, hwirq); + + /* Now try to resolve */ + irq_radix_rdlock(&flags); + ptr = radix_tree_lookup(tree, hwirq); + irq_radix_rdunlock(flags); + + /* Found it, return */ + if (ptr) { + virq = ptr - irq_map; + return virq; } + + /* If not there, try to insert it */ + virq = irq_find_mapping(host, hwirq); + if (virq != NO_IRQ) { + irq_radix_wrlock(&flags); + radix_tree_insert(tree, hwirq, &irq_map[virq]); + irq_radix_wrunlock(flags); + } + return virq; } -static inline void do_softirq_onstack(void) +unsigned int irq_linear_revmap(struct irq_host *host, + irq_hw_number_t hwirq) { - struct thread_info *curtp, *irqtp; + unsigned int *revmap; - curtp = current_thread_info(); - irqtp = softirq_ctx[smp_processor_id()]; - irqtp->task = curtp->task; - call_do_softirq(irqtp); - irqtp->task = NULL; + WARN_ON(host->revmap_type != IRQ_HOST_MAP_LINEAR); + + /* Check revmap bounds */ + if (unlikely(hwirq >= host->revmap_data.linear.size)) + return irq_find_mapping(host, hwirq); + + /* Check if revmap was allocated */ + revmap = host->revmap_data.linear.revmap; + if (unlikely(revmap == NULL)) + return irq_find_mapping(host, hwirq); + + /* Fill up revmap with slow path if no mapping found */ + if (unlikely(revmap[hwirq] == NO_IRQ)) + revmap[hwirq] = irq_find_mapping(host, hwirq); + + return revmap[hwirq]; } -#else -#define do_softirq_onstack() __do_softirq() -#endif /* CONFIG_IRQSTACKS */ +unsigned int irq_alloc_virt(struct irq_host *host, + unsigned int count, + unsigned int hint) +{ + unsigned long flags; + unsigned int i, j, found = NO_IRQ; + unsigned int limit = irq_virq_count - count; -void do_softirq(void) + if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS)) + return NO_IRQ; + + spin_lock_irqsave(&irq_big_lock, flags); + + /* Use hint for 1 interrupt if any */ + if (count == 1 && hint >= NUM_ISA_INTERRUPTS && + hint < irq_virq_count && irq_map[hint].host == NULL) { + found = hint; + goto hint_found; + } + + /* Look for count consecutive numbers in the allocatable + * (non-legacy) space + */ + for (i = NUM_ISA_INTERRUPTS; i <= limit; ) { + for (j = i; j < (i + count); j++) + if (irq_map[j].host != NULL) { + i = j + 1; + continue; + } + found = i; + break; + } + if (found == NO_IRQ) { + spin_unlock_irqrestore(&irq_big_lock, flags); + return NO_IRQ; + } + hint_found: + for (i = found; i < (found + count); i++) { + irq_map[i].hwirq = host->inval_irq; + smp_wmb(); + irq_map[i].host = host; + } + spin_unlock_irqrestore(&irq_big_lock, flags); + return found; +} + +void irq_free_virt(unsigned int virq, unsigned int count) { unsigned long flags; + unsigned int i; - if (in_interrupt()) - return; + WARN_ON (virq < NUM_ISA_INTERRUPTS); + WARN_ON (count == 0 || (virq + count) > irq_virq_count); - local_irq_save(flags); + spin_lock_irqsave(&irq_big_lock, flags); + for (i = virq; i < (virq + count); i++) { + struct irq_host *host; - if (local_softirq_pending()) { - account_system_vtime(current); - local_bh_disable(); - do_softirq_onstack(); - account_system_vtime(current); - __local_bh_enable(); + if (i < NUM_ISA_INTERRUPTS || + (virq + count) > irq_virq_count) + continue; + + host = irq_map[i].host; + irq_map[i].hwirq = host->inval_irq; + smp_wmb(); + irq_map[i].host = NULL; } + spin_unlock_irqrestore(&irq_big_lock, flags); +} - local_irq_restore(flags); +void irq_early_init(void) +{ + unsigned int i; + + for (i = 0; i < NR_IRQS; i++) + get_irq_desc(i)->status |= IRQ_NOREQUEST; } -EXPORT_SYMBOL(do_softirq); + +/* We need to create the radix trees late */ +static int irq_late_init(void) +{ + struct irq_host *h; + unsigned long flags; + + irq_radix_wrlock(&flags); + list_for_each_entry(h, &irq_hosts, link) { + if (h->revmap_type == IRQ_HOST_MAP_TREE) + INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC); + } + irq_radix_wrunlock(flags); + + return 0; +} +arch_initcall(irq_late_init); + +#endif /* CONFIG_PPC_MERGE */ #ifdef CONFIG_PCI_MSI int pci_enable_msi(struct pci_dev * pdev) diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 9f0898c89759..cd65c367b8b6 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -61,6 +61,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) if (!ret) { memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; + flush_icache_range((unsigned long)p->ainsn.insn, + (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t)); } return ret; diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 4cf0b971976b..40a39291861f 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -28,6 +28,7 @@ static struct legacy_serial_info { struct device_node *np; unsigned int speed; unsigned int clock; + int irq_check_parent; phys_addr_t taddr; } legacy_serial_infos[MAX_LEGACY_SERIAL_PORTS]; static unsigned int legacy_serial_count; @@ -36,7 +37,7 @@ static int legacy_serial_console = -1; static int __init add_legacy_port(struct device_node *np, int want_index, int iotype, phys_addr_t base, phys_addr_t taddr, unsigned long irq, - upf_t flags) + upf_t flags, int irq_check_parent) { u32 *clk, *spd, clock = BASE_BAUD * 16; int index; @@ -68,7 +69,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, if (legacy_serial_infos[index].np != 0) { /* if we still have some room, move it, else override */ if (legacy_serial_count < MAX_LEGACY_SERIAL_PORTS) { - printk(KERN_INFO "Moved legacy port %d -> %d\n", + printk(KERN_DEBUG "Moved legacy port %d -> %d\n", index, legacy_serial_count); legacy_serial_ports[legacy_serial_count] = legacy_serial_ports[index]; @@ -76,7 +77,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_infos[index]; legacy_serial_count++; } else { - printk(KERN_INFO "Replacing legacy port %d\n", index); + printk(KERN_DEBUG "Replacing legacy port %d\n", index); } } @@ -95,10 +96,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index, legacy_serial_infos[index].np = of_node_get(np); legacy_serial_infos[index].clock = clock; legacy_serial_infos[index].speed = spd ? *spd : 0; + legacy_serial_infos[index].irq_check_parent = irq_check_parent; - printk(KERN_INFO "Found legacy serial port %d for %s\n", + printk(KERN_DEBUG "Found legacy serial port %d for %s\n", index, np->full_name); - printk(KERN_INFO " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", + printk(KERN_DEBUG " %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n", (iotype == UPIO_PORT) ? "port" : "mem", (unsigned long long)base, (unsigned long long)taddr, irq, legacy_serial_ports[index].uartclk, @@ -110,9 +112,10 @@ static int __init add_legacy_port(struct device_node *np, int want_index, static int __init add_legacy_soc_port(struct device_node *np, struct device_node *soc_dev) { - phys_addr_t addr; + u64 addr; u32 *addrp; upf_t flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + struct device_node *tsi = of_get_parent(np); /* We only support ports that have a clock frequency properly * encoded in the device-tree. @@ -126,11 +129,16 @@ static int __init add_legacy_soc_port(struct device_node *np, return -1; addr = of_translate_address(soc_dev, addrp); + if (addr == OF_BAD_ADDR) + return -1; /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags); + if (tsi && !strcmp(tsi->type, "tsi-bridge")) + return add_legacy_port(np, -1, UPIO_TSI, addr, addr, NO_IRQ, flags, 0); + else + return add_legacy_port(np, -1, UPIO_MEM, addr, addr, NO_IRQ, flags, 0); } static int __init add_legacy_isa_port(struct device_node *np, @@ -139,7 +147,9 @@ static int __init add_legacy_isa_port(struct device_node *np, u32 *reg; char *typep; int index = -1; - phys_addr_t taddr; + u64 taddr; + + DBG(" -> add_legacy_isa_port(%s)\n", np->full_name); /* Get the ISA port number */ reg = (u32 *)get_property(np, "reg", NULL); @@ -159,11 +169,17 @@ static int __init add_legacy_isa_port(struct device_node *np, if (typep && *typep == 'S') index = simple_strtol(typep+1, NULL, 0) - 1; - /* Translate ISA address */ + /* Translate ISA address. If it fails, we still register the port + * with no translated address so that it can be picked up as an IO + * port later by the serial driver + */ taddr = of_translate_address(np, reg); + if (taddr == OF_BAD_ADDR) + taddr = 0; /* Add port, irq will be dealt with later */ - return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, NO_IRQ, UPF_BOOT_AUTOCONF); + return add_legacy_port(np, index, UPIO_PORT, reg[1], taddr, + NO_IRQ, UPF_BOOT_AUTOCONF, 0); } @@ -171,11 +187,13 @@ static int __init add_legacy_isa_port(struct device_node *np, static int __init add_legacy_pci_port(struct device_node *np, struct device_node *pci_dev) { - phys_addr_t addr, base; + u64 addr, base; u32 *addrp; unsigned int flags; int iotype, index = -1, lindex = 0; + DBG(" -> add_legacy_pci_port(%s)\n", np->full_name); + /* We only support ports that have a clock frequency properly * encoded in the device-tree (that is have an fcode). Anything * else can't be used that early and will be normally probed by @@ -194,6 +212,8 @@ static int __init add_legacy_pci_port(struct device_node *np, /* We only support BAR 0 for now */ iotype = (flags & IORESOURCE_MEM) ? UPIO_MEM : UPIO_PORT; addr = of_translate_address(pci_dev, addrp); + if (addr == OF_BAD_ADDR) + return -1; /* Set the IO base to the same as the translated address for MMIO, * or to the domain local IO base for PIO (it will be fixed up later) @@ -231,7 +251,8 @@ static int __init add_legacy_pci_port(struct device_node *np, /* Add port, irq will be dealt with later. We passed a translated * IO port value. It will be fixed up later along with the irq */ - return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, UPF_BOOT_AUTOCONF); + return add_legacy_port(np, index, iotype, base, addr, NO_IRQ, + UPF_BOOT_AUTOCONF, np != pci_dev); } #endif @@ -362,27 +383,22 @@ static void __init fixup_port_irq(int index, struct device_node *np, struct plat_serial8250_port *port) { + unsigned int virq; + DBG("fixup_port_irq(%d)\n", index); - /* Check for interrupts in that node */ - if (np->n_intrs > 0) { - port->irq = np->intrs[0].line; - DBG(" port %d (%s), irq=%d\n", - index, np->full_name, port->irq); - return; + virq = irq_of_parse_and_map(np, 0); + if (virq == NO_IRQ && legacy_serial_infos[index].irq_check_parent) { + np = of_get_parent(np); + if (np == NULL) + return; + virq = irq_of_parse_and_map(np, 0); + of_node_put(np); } - - /* Check for interrupts in the parent */ - np = of_get_parent(np); - if (np == NULL) + if (virq == NO_IRQ) return; - if (np->n_intrs > 0) { - port->irq = np->intrs[0].line; - DBG(" port %d (%s), irq=%d\n", - index, np->full_name, port->irq); - } - of_node_put(np); + port->irq = virq; } static void __init fixup_port_pio(int index, @@ -452,7 +468,7 @@ static int __init serial_dev_init(void) fixup_port_irq(i, np, port); if (port->iotype == UPIO_PORT) fixup_port_pio(i, np, port); - if (port->iotype == UPIO_MEM) + if ((port->iotype == UPIO_MEM) || (port->iotype == UPIO_TSI)) fixup_port_mmio(i, np, port); } diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index a81ca1b841ec..e60a0c544d63 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include <linux/reboot.h> #include <linux/threads.h> #include <asm/machdep.h> +#include <asm/lmb.h> void machine_crash_shutdown(struct pt_regs *regs) { @@ -59,3 +60,58 @@ NORET_TYPE void machine_kexec(struct kimage *image) } for(;;); } + +static int __init early_parse_crashk(char *p) +{ + unsigned long size; + + if (!p) + return 1; + + size = memparse(p, &p); + + if (*p == '@') + crashk_res.start = memparse(p + 1, &p); + else + crashk_res.start = KDUMP_KERNELBASE; + + crashk_res.end = crashk_res.start + size - 1; + + return 0; +} +early_param("crashkernel", early_parse_crashk); + +void __init reserve_crashkernel(void) +{ + unsigned long size; + + if (crashk_res.start == 0) + return; + + /* We might have got these values via the command line or the + * device tree, either way sanitise them now. */ + + size = crashk_res.end - crashk_res.start + 1; + + if (crashk_res.start != KDUMP_KERNELBASE) + printk("Crash kernel location must be 0x%x\n", + KDUMP_KERNELBASE); + + crashk_res.start = KDUMP_KERNELBASE; + size = PAGE_ALIGN(size); + crashk_res.end = crashk_res.start + size - 1; + + /* Crash kernel trumps memory limit */ + if (memory_limit && memory_limit <= crashk_res.end) { + memory_limit = crashk_res.end + 1; + printk("Adjusted memory limit for crashkernel, now 0x%lx\n", + memory_limit); + } + + lmb_reserve(crashk_res.start, size); +} + +int overlaps_crashkernel(unsigned long start, unsigned long size) +{ + return (start + size) > crashk_res.start && start <= crashk_res.end; +} diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index b438d45a068c..be58985c7681 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -10,7 +10,6 @@ */ -#include <linux/cpumask.h> #include <linux/kexec.h> #include <linux/smp.h> #include <linux/thread_info.h> @@ -21,7 +20,6 @@ #include <asm/machdep.h> #include <asm/cacheflush.h> #include <asm/paca.h> -#include <asm/lmb.h> #include <asm/mmu.h> #include <asm/sections.h> /* _end */ #include <asm/prom.h> @@ -385,58 +383,3 @@ static int __init kexec_setup(void) return 0; } __initcall(kexec_setup); - -static int __init early_parse_crashk(char *p) -{ - unsigned long size; - - if (!p) - return 1; - - size = memparse(p, &p); - - if (*p == '@') - crashk_res.start = memparse(p + 1, &p); - else - crashk_res.start = KDUMP_KERNELBASE; - - crashk_res.end = crashk_res.start + size - 1; - - return 0; -} -early_param("crashkernel", early_parse_crashk); - -void __init reserve_crashkernel(void) -{ - unsigned long size; - - if (crashk_res.start == 0) - return; - - /* We might have got these values via the command line or the - * device tree, either way sanitise them now. */ - - size = crashk_res.end - crashk_res.start + 1; - - if (crashk_res.start != KDUMP_KERNELBASE) - printk("Crash kernel location must be 0x%x\n", - KDUMP_KERNELBASE); - - crashk_res.start = KDUMP_KERNELBASE; - size = PAGE_ALIGN(size); - crashk_res.end = crashk_res.start + size - 1; - - /* Crash kernel trumps memory limit */ - if (memory_limit && memory_limit <= crashk_res.end) { - memory_limit = crashk_res.end + 1; - printk("Adjusted memory limit for crashkernel, now 0x%lx\n", - memory_limit); - } - - lmb_reserve(crashk_res.start, size); -} - -int overlaps_crashkernel(unsigned long start, unsigned long size) -{ - return (start + size) > crashk_res.start && start <= crashk_res.end; -} diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S index fc23040d5a26..f770805f1215 100644 --- a/arch/powerpc/kernel/misc.S +++ b/arch/powerpc/kernel/misc.S @@ -17,15 +17,6 @@ .text -#ifdef CONFIG_PPC64 -#define IN_SYNC twi 0,r5,0; isync -#define EIEIO_32 -#define SYNC_64 sync -#else /* CONFIG_PPC32 */ -#define IN_SYNC -#define EIEIO_32 eieio -#define SYNC_64 -#endif /* * Returns (address we are running at) - (address we were linked at) * for use before the text and data are mapped to KERNELBASE. @@ -70,6 +61,7 @@ _GLOBAL(add_reloc_offset) * The *_ns versions don't do byte-swapping. */ _GLOBAL(_insb) + sync cmpwi 0,r5,0 mtctr r5 subi r4,r4,1 @@ -78,7 +70,8 @@ _GLOBAL(_insb) eieio stbu r5,1(r4) bdnz 00b - IN_SYNC + twi 0,r5,0 + isync blr _GLOBAL(_outsb) @@ -86,14 +79,15 @@ _GLOBAL(_outsb) mtctr r5 subi r4,r4,1 blelr- + sync 00: lbzu r5,1(r4) stb r5,0(r3) - EIEIO_32 bdnz 00b - SYNC_64 + sync blr _GLOBAL(_insw) + sync cmpwi 0,r5,0 mtctr r5 subi r4,r4,2 @@ -102,7 +96,8 @@ _GLOBAL(_insw) eieio sthu r5,2(r4) bdnz 00b - IN_SYNC + twi 0,r5,0 + isync blr _GLOBAL(_outsw) @@ -110,14 +105,15 @@ _GLOBAL(_outsw) mtctr r5 subi r4,r4,2 blelr- + sync 00: lhzu r5,2(r4) - EIEIO_32 sthbrx r5,0,r3 bdnz 00b - SYNC_64 + sync blr _GLOBAL(_insl) + sync cmpwi 0,r5,0 mtctr r5 subi r4,r4,4 @@ -126,7 +122,8 @@ _GLOBAL(_insl) eieio stwu r5,4(r4) bdnz 00b - IN_SYNC + twi 0,r5,0 + isync blr _GLOBAL(_outsl) @@ -134,17 +131,18 @@ _GLOBAL(_outsl) mtctr r5 subi r4,r4,4 blelr- + sync 00: lwzu r5,4(r4) stwbrx r5,0,r3 - EIEIO_32 bdnz 00b - SYNC_64 + sync blr #ifdef CONFIG_PPC32 _GLOBAL(__ide_mm_insw) #endif _GLOBAL(_insw_ns) + sync cmpwi 0,r5,0 mtctr r5 subi r4,r4,2 @@ -153,7 +151,8 @@ _GLOBAL(_insw_ns) eieio sthu r5,2(r4) bdnz 00b - IN_SYNC + twi 0,r5,0 + isync blr #ifdef CONFIG_PPC32 @@ -164,17 +163,18 @@ _GLOBAL(_outsw_ns) mtctr r5 subi r4,r4,2 blelr- + sync 00: lhzu r5,2(r4) sth r5,0(r3) - EIEIO_32 bdnz 00b - SYNC_64 + sync blr #ifdef CONFIG_PPC32 _GLOBAL(__ide_mm_insl) #endif _GLOBAL(_insl_ns) + sync cmpwi 0,r5,0 mtctr r5 subi r4,r4,4 @@ -183,7 +183,8 @@ _GLOBAL(_insl_ns) eieio stwu r5,4(r4) bdnz 00b - IN_SYNC + twi 0,r5,0 + isync blr #ifdef CONFIG_PPC32 @@ -194,10 +195,10 @@ _GLOBAL(_outsl_ns) mtctr r5 subi r4,r4,4 blelr- + sync 00: lwzu r5,4(r4) stw r5,0(r3) - EIEIO_32 bdnz 00b - SYNC_64 + sync blr diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 0c3c70d115c6..e3ed21cd3d94 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -51,12 +51,14 @@ _GLOBAL(call_do_softirq) mtlr r0 blr -_GLOBAL(call___do_IRQ) +_GLOBAL(call_handle_irq) + ld r8,0(r7) mflr r0 std r0,16(r1) - stdu r1,THREAD_SIZE-112(r5) - mr r1,r5 - bl .__do_IRQ + mtctr r8 + stdu r1,THREAD_SIZE-112(r6) + mr r1,r6 + bctrl ld r1,0(r1) ld r0,16(r1) mtlr r0 @@ -685,7 +687,7 @@ _GLOBAL(kexec_sequence) /* clear out hardware hash page table and tlb */ ld r5,0(r27) /* deref function descriptor */ mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ + bctrl /* ppc_md.hpte_clear_all(void); */ /* * kexec image calling is: diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 1333335c474e..09b1e1bbb29b 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -11,6 +11,7 @@ #include <linux/sched.h> #include <linux/errno.h> #include <linux/bootmem.h> +#include <linux/irq.h> #include <asm/processor.h> #include <asm/io.h> @@ -18,7 +19,6 @@ #include <asm/sections.h> #include <asm/pci-bridge.h> #include <asm/byteorder.h> -#include <asm/irq.h> #include <asm/uaccess.h> #include <asm/machdep.h> @@ -1404,6 +1404,65 @@ pcibios_update_irq(struct pci_dev *dev, int irq) /* XXX FIXME - update OF device tree node interrupt property */ } +#ifdef CONFIG_PPC_MERGE +/* XXX This is a copy of the ppc64 version. This is temporary until we start + * merging the 2 PCI layers + */ +/* + * Reads the interrupt pin to determine if interrupt is use by card. + * If the interrupt is used, then gets the interrupt line from the + * openfirmware and sets it in the pci_dev and pci_config line. + */ +int pci_read_irq_line(struct pci_dev *pci_dev) +{ + struct of_irq oirq; + unsigned int virq; + + DBG("Try to map irq for %s...\n", pci_name(pci_dev)); + + /* Try to get a mapping from the device-tree */ + if (of_irq_map_pci(pci_dev, &oirq)) { + u8 line, pin; + + /* If that fails, lets fallback to what is in the config + * space and map that through the default controller. We + * also set the type to level low since that's what PCI + * interrupts are. If your platform does differently, then + * either provide a proper interrupt tree or don't use this + * function. + */ + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) + return -1; + if (pin == 0) + return -1; + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || + line == 0xff) { + return -1; + } + DBG(" -> no map ! Using irq line %d from PCI config\n", line); + + virq = irq_create_mapping(NULL, line); + if (virq != NO_IRQ) + set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + } else { + DBG(" -> got one, spec %d cells (0x%08x...) on %s\n", + oirq.size, oirq.specifier[0], oirq.controller->full_name); + + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + } + if(virq == NO_IRQ) { + DBG(" -> failed to map !\n"); + return -1; + } + pci_dev->irq = virq; + pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq); + + return 0; +} +EXPORT_SYMBOL(pci_read_irq_line); +#endif /* CONFIG_PPC_MERGE */ + int pcibios_enable_device(struct pci_dev *dev, int mask) { u16 cmd, old_cmd; diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index bea8451fb57b..138134c8c17d 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -21,13 +21,13 @@ #include <linux/mm.h> #include <linux/list.h> #include <linux/syscalls.h> +#include <linux/irq.h> #include <asm/processor.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/pci-bridge.h> #include <asm/byteorder.h> -#include <asm/irq.h> #include <asm/machdep.h> #include <asm/ppc-pci.h> @@ -398,12 +398,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, } else { dev->hdr_type = PCI_HEADER_TYPE_NORMAL; dev->rom_base_reg = PCI_ROM_ADDRESS; + /* Maybe do a default OF mapping here */ dev->irq = NO_IRQ; - if (node->n_intrs > 0) { - dev->irq = node->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, - dev->irq); - } } pci_parse_of_addrs(node, dev); @@ -1288,23 +1284,55 @@ EXPORT_SYMBOL(pcibios_fixup_bus); */ int pci_read_irq_line(struct pci_dev *pci_dev) { - u8 intpin; - struct device_node *node; + struct of_irq oirq; + unsigned int virq; - pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin); - if (intpin == 0) - return 0; + DBG("Try to map irq for %s...\n", pci_name(pci_dev)); - node = pci_device_to_OF_node(pci_dev); - if (node == NULL) - return -1; +#ifdef DEBUG + memset(&oirq, 0xff, sizeof(oirq)); +#endif + /* Try to get a mapping from the device-tree */ + if (of_irq_map_pci(pci_dev, &oirq)) { + u8 line, pin; + + /* If that fails, lets fallback to what is in the config + * space and map that through the default controller. We + * also set the type to level low since that's what PCI + * interrupts are. If your platform does differently, then + * either provide a proper interrupt tree or don't use this + * function. + */ + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin)) + return -1; + if (pin == 0) + return -1; + if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) || + line == 0xff) { + return -1; + } + DBG(" -> no map ! Using irq line %d from PCI config\n", line); + + virq = irq_create_mapping(NULL, line); + if (virq != NO_IRQ) + set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + } else { + DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n", + oirq.size, oirq.specifier[0], oirq.specifier[1], + oirq.controller->full_name); - if (node->n_intrs == 0) + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + } + if(virq == NO_IRQ) { + DBG(" -> failed to map !\n"); return -1; + } - pci_dev->irq = node->intrs[0].line; + DBG(" -> mapped to linux irq %d\n", virq); - pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq); + pci_dev->irq = virq; + pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq); return 0; } diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index e3b80f71748e..39d3bfcabcd2 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -5,7 +5,7 @@ #include <linux/elfcore.h> #include <linux/string.h> #include <linux/interrupt.h> -#include <linux/tty.h> +#include <linux/screen_info.h> #include <linux/vt_kern.h> #include <linux/nvram.h> #include <linux/console.h> @@ -126,10 +126,6 @@ EXPORT_SYMBOL(pci_bus_mem_base_phys); EXPORT_SYMBOL(pci_bus_to_hose); #endif /* CONFIG_PCI */ -#ifdef CONFIG_NOT_COHERENT_CACHE -EXPORT_SYMBOL(flush_dcache_all); -#endif - EXPORT_SYMBOL(start_thread); EXPORT_SYMBOL(kernel_thread); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 4c524cb52184..a1787ffb6319 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -30,6 +30,7 @@ #include <linux/module.h> #include <linux/kexec.h> #include <linux/debugfs.h> +#include <linux/irq.h> #include <asm/prom.h> #include <asm/rtas.h> @@ -86,424 +87,6 @@ static DEFINE_RWLOCK(devtree_lock); /* export that to outside world */ struct device_node *of_chosen; -struct device_node *dflt_interrupt_controller; -int num_interrupt_controllers; - -/* - * Wrapper for allocating memory for various data that needs to be - * attached to device nodes as they are processed at boot or when - * added to the device tree later (e.g. DLPAR). At boot there is - * already a region reserved so we just increment *mem_start by size; - * otherwise we call kmalloc. - */ -static void * prom_alloc(unsigned long size, unsigned long *mem_start) -{ - unsigned long tmp; - - if (!mem_start) - return kmalloc(size, GFP_KERNEL); - - tmp = *mem_start; - *mem_start += size; - return (void *)tmp; -} - -/* - * Find the device_node with a given phandle. - */ -static struct device_node * find_phandle(phandle ph) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == ph) - return np; - return NULL; -} - -/* - * Find the interrupt parent of a node. - */ -static struct device_node * __devinit intr_parent(struct device_node *p) -{ - phandle *parp; - - parp = (phandle *) get_property(p, "interrupt-parent", NULL); - if (parp == NULL) - return p->parent; - p = find_phandle(*parp); - if (p != NULL) - return p; - /* - * On a powermac booted with BootX, we don't get to know the - * phandles for any nodes, so find_phandle will return NULL. - * Fortunately these machines only have one interrupt controller - * so there isn't in fact any ambiguity. -- paulus - */ - if (num_interrupt_controllers == 1) - p = dflt_interrupt_controller; - return p; -} - -/* - * Find out the size of each entry of the interrupts property - * for a node. - */ -int __devinit prom_n_intr_cells(struct device_node *np) -{ - struct device_node *p; - unsigned int *icp; - - for (p = np; (p = intr_parent(p)) != NULL; ) { - icp = (unsigned int *) - get_property(p, "#interrupt-cells", NULL); - if (icp != NULL) - return *icp; - if (get_property(p, "interrupt-controller", NULL) != NULL - || get_property(p, "interrupt-map", NULL) != NULL) { - printk("oops, node %s doesn't have #interrupt-cells\n", - p->full_name); - return 1; - } - } -#ifdef DEBUG_IRQ - printk("prom_n_intr_cells failed for %s\n", np->full_name); -#endif - return 1; -} - -/* - * Map an interrupt from a device up to the platform interrupt - * descriptor. - */ -static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictrler, - struct device_node *np, unsigned int *ints, - int nintrc) -{ - struct device_node *p, *ipar; - unsigned int *imap, *imask, *ip; - int i, imaplen, match; - int newintrc = 0, newaddrc = 0; - unsigned int *reg; - int naddrc; - - reg = (unsigned int *) get_property(np, "reg", NULL); - naddrc = prom_n_addr_cells(np); - p = intr_parent(np); - while (p != NULL) { - if (get_property(p, "interrupt-controller", NULL) != NULL) - /* this node is an interrupt controller, stop here */ - break; - imap = (unsigned int *) - get_property(p, "interrupt-map", &imaplen); - if (imap == NULL) { - p = intr_parent(p); - continue; - } - imask = (unsigned int *) - get_property(p, "interrupt-map-mask", NULL); - if (imask == NULL) { - printk("oops, %s has interrupt-map but no mask\n", - p->full_name); - return 0; - } - imaplen /= sizeof(unsigned int); - match = 0; - ipar = NULL; - while (imaplen > 0 && !match) { - /* check the child-interrupt field */ - match = 1; - for (i = 0; i < naddrc && match; ++i) - match = ((reg[i] ^ imap[i]) & imask[i]) == 0; - for (; i < naddrc + nintrc && match; ++i) - match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0; - imap += naddrc + nintrc; - imaplen -= naddrc + nintrc; - /* grab the interrupt parent */ - ipar = find_phandle((phandle) *imap++); - --imaplen; - if (ipar == NULL && num_interrupt_controllers == 1) - /* cope with BootX not giving us phandles */ - ipar = dflt_interrupt_controller; - if (ipar == NULL) { - printk("oops, no int parent %x in map of %s\n", - imap[-1], p->full_name); - return 0; - } - /* find the parent's # addr and intr cells */ - ip = (unsigned int *) - get_property(ipar, "#interrupt-cells", NULL); - if (ip == NULL) { - printk("oops, no #interrupt-cells on %s\n", - ipar->full_name); - return 0; - } - newintrc = *ip; - ip = (unsigned int *) - get_property(ipar, "#address-cells", NULL); - newaddrc = (ip == NULL)? 0: *ip; - imap += newaddrc + newintrc; - imaplen -= newaddrc + newintrc; - } - if (imaplen < 0) { - printk("oops, error decoding int-map on %s, len=%d\n", - p->full_name, imaplen); - return 0; - } - if (!match) { -#ifdef DEBUG_IRQ - printk("oops, no match in %s int-map for %s\n", - p->full_name, np->full_name); -#endif - return 0; - } - p = ipar; - naddrc = newaddrc; - nintrc = newintrc; - ints = imap - nintrc; - reg = ints - naddrc; - } - if (p == NULL) { -#ifdef DEBUG_IRQ - printk("hmmm, int tree for %s doesn't have ctrler\n", - np->full_name); -#endif - return 0; - } - *irq = ints; - *ictrler = p; - return nintrc; -} - -static unsigned char map_isa_senses[4] = { - IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE, - IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE, - IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE, - IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE -}; - -static unsigned char map_mpic_senses[4] = { - IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE, - IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE, - /* 2 seems to be used for the 8259 cascade... */ - IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE, - IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE, -}; - -static int __devinit finish_node_interrupts(struct device_node *np, - unsigned long *mem_start, - int measure_only) -{ - unsigned int *ints; - int intlen, intrcells, intrcount; - int i, j, n, sense; - unsigned int *irq, virq; - struct device_node *ic; - int trace = 0; - - //#define TRACE(fmt...) do { if (trace) { printk(fmt); mdelay(1000); } } while(0) -#define TRACE(fmt...) - - if (!strcmp(np->name, "smu-doorbell")) - trace = 1; - - TRACE("Finishing SMU doorbell ! num_interrupt_controllers = %d\n", - num_interrupt_controllers); - - if (num_interrupt_controllers == 0) { - /* - * Old machines just have a list of interrupt numbers - * and no interrupt-controller nodes. - */ - ints = (unsigned int *) get_property(np, "AAPL,interrupts", - &intlen); - /* XXX old interpret_pci_props looked in parent too */ - /* XXX old interpret_macio_props looked for interrupts - before AAPL,interrupts */ - if (ints == NULL) - ints = (unsigned int *) get_property(np, "interrupts", - &intlen); - if (ints == NULL) - return 0; - - np->n_intrs = intlen / sizeof(unsigned int); - np->intrs = prom_alloc(np->n_intrs * sizeof(np->intrs[0]), - mem_start); - if (!np->intrs) - return -ENOMEM; - if (measure_only) - return 0; - - for (i = 0; i < np->n_intrs; ++i) { - np->intrs[i].line = *ints++; - np->intrs[i].sense = IRQ_SENSE_LEVEL - | IRQ_POLARITY_NEGATIVE; - } - return 0; - } - - ints = (unsigned int *) get_property(np, "interrupts", &intlen); - TRACE("ints=%p, intlen=%d\n", ints, intlen); - if (ints == NULL) - return 0; - intrcells = prom_n_intr_cells(np); - intlen /= intrcells * sizeof(unsigned int); - TRACE("intrcells=%d, new intlen=%d\n", intrcells, intlen); - np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start); - if (!np->intrs) - return -ENOMEM; - - if (measure_only) - return 0; - - intrcount = 0; - for (i = 0; i < intlen; ++i, ints += intrcells) { - n = map_interrupt(&irq, &ic, np, ints, intrcells); - TRACE("map, irq=%d, ic=%p, n=%d\n", irq, ic, n); - if (n <= 0) - continue; - - /* don't map IRQ numbers under a cascaded 8259 controller */ - if (ic && device_is_compatible(ic, "chrp,iic")) { - np->intrs[intrcount].line = irq[0]; - sense = (n > 1)? (irq[1] & 3): 3; - np->intrs[intrcount].sense = map_isa_senses[sense]; - } else { - virq = virt_irq_create_mapping(irq[0]); - TRACE("virq=%d\n", virq); -#ifdef CONFIG_PPC64 - if (virq == NO_IRQ) { - printk(KERN_CRIT "Could not allocate interrupt" - " number for %s\n", np->full_name); - continue; - } -#endif - np->intrs[intrcount].line = irq_offset_up(virq); - sense = (n > 1)? (irq[1] & 3): 1; - - /* Apple uses bits in there in a different way, let's - * only keep the real sense bit on macs - */ - if (machine_is(powermac)) - sense &= 0x1; - np->intrs[intrcount].sense = map_mpic_senses[sense]; - } - -#ifdef CONFIG_PPC64 - /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (machine_is(powermac) && ic && ic->parent) { - char *name = get_property(ic->parent, "name", NULL); - if (name && !strcmp(name, "u3")) - np->intrs[intrcount].line += 128; - else if (!(name && (!strcmp(name, "mac-io") || - !strcmp(name, "u4")))) - /* ignore other cascaded controllers, such as - the k2-sata-root */ - break; - } -#endif /* CONFIG_PPC64 */ - if (n > 2) { - printk("hmmm, got %d intr cells for %s:", n, - np->full_name); - for (j = 0; j < n; ++j) - printk(" %d", irq[j]); - printk("\n"); - } - ++intrcount; - } - np->n_intrs = intrcount; - - return 0; -} - -static int __devinit finish_node(struct device_node *np, - unsigned long *mem_start, - int measure_only) -{ - struct device_node *child; - int rc = 0; - - rc = finish_node_interrupts(np, mem_start, measure_only); - if (rc) - goto out; - - for (child = np->child; child != NULL; child = child->sibling) { - rc = finish_node(child, mem_start, measure_only); - if (rc) - goto out; - } -out: - return rc; -} - -static void __init scan_interrupt_controllers(void) -{ - struct device_node *np; - int n = 0; - char *name, *ic; - int iclen; - - for (np = allnodes; np != NULL; np = np->allnext) { - ic = get_property(np, "interrupt-controller", &iclen); - name = get_property(np, "name", NULL); - /* checking iclen makes sure we don't get a false - match on /chosen.interrupt_controller */ - if ((name != NULL - && strcmp(name, "interrupt-controller") == 0) - || (ic != NULL && iclen == 0 - && strcmp(name, "AppleKiwi"))) { - if (n == 0) - dflt_interrupt_controller = np; - ++n; - } - } - num_interrupt_controllers = n; -} - -/** - * finish_device_tree is called once things are running normally - * (i.e. with text and data mapped to the address they were linked at). - * It traverses the device tree and fills in some of the additional, - * fields in each node like {n_}addrs and {n_}intrs, the virt interrupt - * mapping is also initialized at this point. - */ -void __init finish_device_tree(void) -{ - unsigned long start, end, size = 0; - - DBG(" -> finish_device_tree\n"); - -#ifdef CONFIG_PPC64 - /* Initialize virtual IRQ map */ - virt_irq_init(); -#endif - scan_interrupt_controllers(); - - /* - * Finish device-tree (pre-parsing some properties etc...) - * We do this in 2 passes. One with "measure_only" set, which - * will only measure the amount of memory needed, then we can - * allocate that memory, and call finish_node again. However, - * we must be careful as most routines will fail nowadays when - * prom_alloc() returns 0, so we must make sure our first pass - * doesn't start at 0. We pre-initialize size to 16 for that - * reason and then remove those additional 16 bytes - */ - size = 16; - finish_node(allnodes, &size, 1); - size -= 16; - - if (0 == size) - end = start = 0; - else - end = start = (unsigned long)__va(lmb_alloc(size, 128)); - - finish_node(allnodes, &end, 0); - BUG_ON(end != start + size); - - DBG(" <- finish_device_tree\n"); -} - static inline char *find_flat_dt_string(u32 offset) { return ((char *)initial_boot_params) + @@ -1389,27 +972,6 @@ prom_n_size_cells(struct device_node* np) EXPORT_SYMBOL(prom_n_size_cells); /** - * Work out the sense (active-low level / active-high edge) - * of each interrupt from the device tree. - */ -void __init prom_get_irq_senses(unsigned char *senses, int off, int max) -{ - struct device_node *np; - int i, j; - - /* default to level-triggered */ - memset(senses, IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE, max - off); - - for (np = allnodes; np != 0; np = np->allnext) { - for (j = 0; j < np->n_intrs; j++) { - i = np->intrs[j].line; - if (i >= off && i < max) - senses[i-off] = np->intrs[j].sense; - } - } -} - -/** * Construct and return a list of the device_nodes with a given name. */ struct device_node *find_devices(const char *name) @@ -1808,7 +1370,6 @@ static void of_node_release(struct kref *kref) node->deadprops = NULL; } } - kfree(node->intrs); kfree(node->full_name); kfree(node->data); kfree(node); @@ -1881,13 +1442,7 @@ void of_detach_node(const struct device_node *np) #ifdef CONFIG_PPC_PSERIES /* * Fix up the uninitialized fields in a new device node: - * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields - * - * A lot of boot-time code is duplicated here, because functions such - * as finish_node_interrupts, interpret_pci_props, etc. cannot use the - * slab allocator. - * - * This should probably be split up into smaller chunks. + * name, type and pci-specific fields */ static int of_finish_dynamic_node(struct device_node *node) @@ -1928,8 +1483,6 @@ static int prom_reconfig_notifier(struct notifier_block *nb, switch (action) { case PSERIES_RECONFIG_ADD: err = of_finish_dynamic_node(node); - if (!err) - finish_node(node, NULL, 0); if (err < 0) { printk(KERN_ERR "finish_node returned %d\n", err); err = NOTIFY_BAD; @@ -1975,8 +1528,7 @@ struct property *of_find_property(struct device_node *np, const char *name, * Find a property with a given name for a given node * and return the value. */ -unsigned char *get_property(struct device_node *np, const char *name, - int *lenp) +void *get_property(struct device_node *np, const char *name, int *lenp) { struct property *pp = of_find_property(np,name,lenp); return pp ? pp->value : NULL; diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1e95a9f8cda1..4394e545f9f7 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -557,7 +557,9 @@ unsigned long prom_memparse(const char *ptr, const char **retptr) static void __init early_cmdline_parse(void) { struct prom_t *_prom = &RELOC(prom); +#ifdef CONFIG_PPC64 const char *opt; +#endif char *p; int l = 0; @@ -644,13 +646,13 @@ static unsigned char ibm_architecture_vec[] = { 5 - 1, /* 5 option vectors */ /* option vector 1: processor architectures supported */ - 3 - 1, /* length */ + 3 - 2, /* length */ 0, /* don't ignore, don't halt */ OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 | OV1_PPC_2_04 | OV1_PPC_2_05, /* option vector 2: Open Firmware options supported */ - 34 - 1, /* length */ + 34 - 2, /* length */ OV2_REAL_MODE, 0, 0, W(0xffffffff), /* real_base */ @@ -664,16 +666,16 @@ static unsigned char ibm_architecture_vec[] = { 48, /* max log_2(hash table size) */ /* option vector 3: processor options supported */ - 3 - 1, /* length */ + 3 - 2, /* length */ 0, /* don't ignore, don't halt */ OV3_FP | OV3_VMX, /* option vector 4: IBM PAPR implementation */ - 2 - 1, /* length */ + 2 - 2, /* length */ 0, /* don't halt */ /* option vector 5: PAPR/OF options */ - 3 - 1, /* length */ + 3 - 2, /* length */ 0, /* don't ignore, don't halt */ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES, }; @@ -1990,12 +1992,22 @@ static void __init flatten_device_tree(void) static void __init fixup_device_tree_maple(void) { phandle isa; + u32 rloc = 0x01002000; /* IO space; PCI device = 4 */ u32 isa_ranges[6]; - - isa = call_prom("finddevice", 1, 1, ADDR("/ht@0/isa@4")); + char *name; + + name = "/ht@0/isa@4"; + isa = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(isa)) { + name = "/ht@0/isa@6"; + isa = call_prom("finddevice", 1, 1, ADDR(name)); + rloc = 0x01003000; /* IO space; PCI device = 6 */ + } if (!PHANDLE_VALID(isa)) return; + if (prom_getproplen(isa, "ranges") != 12) + return; if (prom_getprop(isa, "ranges", isa_ranges, sizeof(isa_ranges)) == PROM_ERROR) return; @@ -2005,21 +2017,54 @@ static void __init fixup_device_tree_maple(void) isa_ranges[2] != 0x00010000) return; - prom_printf("fixing up bogus ISA range on Maple...\n"); + prom_printf("Fixing up bogus ISA range on Maple/Apache...\n"); isa_ranges[0] = 0x1; isa_ranges[1] = 0x0; - isa_ranges[2] = 0x01002000; /* IO space; PCI device = 4 */ + isa_ranges[2] = rloc; isa_ranges[3] = 0x0; isa_ranges[4] = 0x0; isa_ranges[5] = 0x00010000; - prom_setprop(isa, "/ht@0/isa@4", "ranges", + prom_setprop(isa, name, "ranges", isa_ranges, sizeof(isa_ranges)); } #else #define fixup_device_tree_maple() #endif +#ifdef CONFIG_PPC_CHRP +/* Pegasos lacks the "ranges" property in the isa node */ +static void __init fixup_device_tree_chrp(void) +{ + phandle isa; + u32 isa_ranges[6]; + char *name; + int rc; + + name = "/pci@80000000/isa@c"; + isa = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(isa)) + return; + + rc = prom_getproplen(isa, "ranges"); + if (rc != 0 && rc != PROM_ERROR) + return; + + prom_printf("Fixing up missing ISA range on Pegasos...\n"); + + isa_ranges[0] = 0x1; + isa_ranges[1] = 0x0; + isa_ranges[2] = 0x01006000; + isa_ranges[3] = 0x0; + isa_ranges[4] = 0x0; + isa_ranges[5] = 0x00010000; + prom_setprop(isa, name, "ranges", + isa_ranges, sizeof(isa_ranges)); +} +#else +#define fixup_device_tree_chrp() +#endif + #if defined(CONFIG_PPC64) && defined(CONFIG_PPC_PMAC) static void __init fixup_device_tree_pmac(void) { @@ -2067,6 +2112,7 @@ static void __init fixup_device_tree_pmac(void) static void __init fixup_device_tree(void) { fixup_device_tree_maple(); + fixup_device_tree_chrp(); fixup_device_tree_pmac(); } diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 45df420383cc..a10825a5dfe6 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -38,14 +38,6 @@ static void of_dump_addr(const char *s, u32 *addr, int na) static void of_dump_addr(const char *s, u32 *addr, int na) { } #endif -/* Read a big address */ -static inline u64 of_read_addr(u32 *cell, int size) -{ - u64 r = 0; - while (size--) - r = (r << 32) | *(cell++); - return r; -} /* Callbacks for bus specific translators */ struct of_bus { @@ -77,9 +69,9 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna) { u64 cp, s, da; - cp = of_read_addr(range, na); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr, na); + cp = of_read_number(range, na); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr, na); DBG("OF: default map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); @@ -91,7 +83,7 @@ static u64 of_bus_default_map(u32 *addr, u32 *range, int na, int ns, int pna) static int of_bus_default_translate(u32 *addr, u64 offset, int na) { - u64 a = of_read_addr(addr, na); + u64 a = of_read_number(addr, na); memset(addr, 0, na * 4); a += offset; if (na > 1) @@ -135,9 +127,9 @@ static u64 of_bus_pci_map(u32 *addr, u32 *range, int na, int ns, int pna) return OF_BAD_ADDR; /* Read address values, skipping high cell */ - cp = of_read_addr(range + 1, na - 1); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr + 1, na - 1); + cp = of_read_number(range + 1, na - 1); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr + 1, na - 1); DBG("OF: PCI map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); @@ -195,9 +187,9 @@ static u64 of_bus_isa_map(u32 *addr, u32 *range, int na, int ns, int pna) return OF_BAD_ADDR; /* Read address values, skipping high cell */ - cp = of_read_addr(range + 1, na - 1); - s = of_read_addr(range + na + pna, ns); - da = of_read_addr(addr + 1, na - 1); + cp = of_read_number(range + 1, na - 1); + s = of_read_number(range + na + pna, ns); + da = of_read_number(addr + 1, na - 1); DBG("OF: ISA map, cp="PRu64", s="PRu64", da="PRu64"\n", cp, s, da); @@ -295,7 +287,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, */ ranges = (u32 *)get_property(parent, "ranges", &rlen); if (ranges == NULL || rlen == 0) { - offset = of_read_addr(addr, na); + offset = of_read_number(addr, na); memset(addr, 0, pna * 4); DBG("OF: no ranges, 1:1 translation\n"); goto finish; @@ -378,7 +370,7 @@ u64 of_translate_address(struct device_node *dev, u32 *in_addr) /* If root, we have finished */ if (parent == NULL) { DBG("OF: reached root node\n"); - result = of_read_addr(addr, na); + result = of_read_number(addr, na); break; } @@ -442,7 +434,7 @@ u32 *of_get_address(struct device_node *dev, int index, u64 *size, for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) if (i == index) { if (size) - *size = of_read_addr(prop + na, ns); + *size = of_read_number(prop + na, ns); if (flags) *flags = bus->get_flags(prop); return prop; @@ -484,7 +476,7 @@ u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { if (size) - *size = of_read_addr(prop + na, ns); + *size = of_read_number(prop + na, ns); if (flags) *flags = bus->get_flags(prop); return prop; @@ -565,11 +557,424 @@ void of_parse_dma_window(struct device_node *dn, unsigned char *dma_window_prop, prop = get_property(dn, "#address-cells", NULL); cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn); - *phys = of_read_addr(dma_window, cells); + *phys = of_read_number(dma_window, cells); dma_window += cells; prop = get_property(dn, "ibm,#dma-size-cells", NULL); cells = prop ? *(u32 *)prop : prom_n_size_cells(dn); - *size = of_read_addr(dma_window, cells); + *size = of_read_number(dma_window, cells); +} + +/* + * Interrupt remapper + */ + +static unsigned int of_irq_workarounds; +static struct device_node *of_irq_dflt_pic; + +static struct device_node *of_irq_find_parent(struct device_node *child) +{ + struct device_node *p; + phandle *parp; + + if (!of_node_get(child)) + return NULL; + + do { + parp = (phandle *)get_property(child, "interrupt-parent", NULL); + if (parp == NULL) + p = of_get_parent(child); + else { + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + p = of_node_get(of_irq_dflt_pic); + else + p = of_find_node_by_phandle(*parp); + } + of_node_put(child); + child = p; + } while (p && get_property(p, "#interrupt-cells", NULL) == NULL); + + return p; +} + +/* This doesn't need to be called if you don't have any special workaround + * flags to pass + */ +void of_irq_map_init(unsigned int flags) +{ + of_irq_workarounds = flags; + + /* OldWorld, don't bother looking at other things */ + if (flags & OF_IMAP_OLDWORLD_MAC) + return; + + /* If we don't have phandles, let's try to locate a default interrupt + * controller (happens when booting with BootX). We do a first match + * here, hopefully, that only ever happens on machines with one + * controller. + */ + if (flags & OF_IMAP_NO_PHANDLE) { + struct device_node *np; + + for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) { + if (get_property(np, "interrupt-controller", NULL) + == NULL) + continue; + /* Skip /chosen/interrupt-controller */ + if (strcmp(np->name, "chosen") == 0) + continue; + /* It seems like at least one person on this planet wants + * to use BootX on a machine with an AppleKiwi controller + * which happens to pretend to be an interrupt + * controller too. + */ + if (strcmp(np->name, "AppleKiwi") == 0) + continue; + /* I think we found one ! */ + of_irq_dflt_pic = np; + break; + } + } + +} + +int of_irq_map_raw(struct device_node *parent, u32 *intspec, u32 ointsize, + u32 *addr, struct of_irq *out_irq) +{ + struct device_node *ipar, *tnode, *old = NULL, *newpar = NULL; + u32 *tmp, *imap, *imask; + u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0; + int imaplen, match, i; + + DBG("of_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n", + parent->full_name, intspec[0], intspec[1], ointsize); + + ipar = of_node_get(parent); + + /* First get the #interrupt-cells property of the current cursor + * that tells us how to interpret the passed-in intspec. If there + * is none, we are nice and just walk up the tree + */ + do { + tmp = (u32 *)get_property(ipar, "#interrupt-cells", NULL); + if (tmp != NULL) { + intsize = *tmp; + break; + } + tnode = ipar; + ipar = of_irq_find_parent(ipar); + of_node_put(tnode); + } while (ipar); + if (ipar == NULL) { + DBG(" -> no parent found !\n"); + goto fail; + } + + DBG("of_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize); + + if (ointsize != intsize) + return -EINVAL; + + /* Look for this #address-cells. We have to implement the old linux + * trick of looking for the parent here as some device-trees rely on it + */ + old = of_node_get(ipar); + do { + tmp = (u32 *)get_property(old, "#address-cells", NULL); + tnode = of_get_parent(old); + of_node_put(old); + old = tnode; + } while(old && tmp == NULL); + of_node_put(old); + old = NULL; + addrsize = (tmp == NULL) ? 2 : *tmp; + + DBG(" -> addrsize=%d\n", addrsize); + + /* Now start the actual "proper" walk of the interrupt tree */ + while (ipar != NULL) { + /* Now check if cursor is an interrupt-controller and if it is + * then we are done + */ + if (get_property(ipar, "interrupt-controller", NULL) != NULL) { + DBG(" -> got it !\n"); + memcpy(out_irq->specifier, intspec, + intsize * sizeof(u32)); + out_irq->size = intsize; + out_irq->controller = ipar; + of_node_put(old); + return 0; + } + + /* Now look for an interrupt-map */ + imap = (u32 *)get_property(ipar, "interrupt-map", &imaplen); + /* No interrupt map, check for an interrupt parent */ + if (imap == NULL) { + DBG(" -> no map, getting parent\n"); + newpar = of_irq_find_parent(ipar); + goto skiplevel; + } + imaplen /= sizeof(u32); + + /* Look for a mask */ + imask = (u32 *)get_property(ipar, "interrupt-map-mask", NULL); + + /* If we were passed no "reg" property and we attempt to parse + * an interrupt-map, then #address-cells must be 0. + * Fail if it's not. + */ + if (addr == NULL && addrsize != 0) { + DBG(" -> no reg passed in when needed !\n"); + goto fail; + } + + /* Parse interrupt-map */ + match = 0; + while (imaplen > (addrsize + intsize + 1) && !match) { + /* Compare specifiers */ + match = 1; + for (i = 0; i < addrsize && match; ++i) { + u32 mask = imask ? imask[i] : 0xffffffffu; + match = ((addr[i] ^ imap[i]) & mask) == 0; + } + for (; i < (addrsize + intsize) && match; ++i) { + u32 mask = imask ? imask[i] : 0xffffffffu; + match = + ((intspec[i-addrsize] ^ imap[i]) & mask) == 0; + } + imap += addrsize + intsize; + imaplen -= addrsize + intsize; + + DBG(" -> match=%d (imaplen=%d)\n", match, imaplen); + + /* Get the interrupt parent */ + if (of_irq_workarounds & OF_IMAP_NO_PHANDLE) + newpar = of_node_get(of_irq_dflt_pic); + else + newpar = of_find_node_by_phandle((phandle)*imap); + imap++; + --imaplen; + + /* Check if not found */ + if (newpar == NULL) { + DBG(" -> imap parent not found !\n"); + goto fail; + } + + /* Get #interrupt-cells and #address-cells of new + * parent + */ + tmp = (u32 *)get_property(newpar, "#interrupt-cells", + NULL); + if (tmp == NULL) { + DBG(" -> parent lacks #interrupt-cells !\n"); + goto fail; + } + newintsize = *tmp; + tmp = (u32 *)get_property(newpar, "#address-cells", + NULL); + newaddrsize = (tmp == NULL) ? 0 : *tmp; + + DBG(" -> newintsize=%d, newaddrsize=%d\n", + newintsize, newaddrsize); + + /* Check for malformed properties */ + if (imaplen < (newaddrsize + newintsize)) + goto fail; + + imap += newaddrsize + newintsize; + imaplen -= newaddrsize + newintsize; + + DBG(" -> imaplen=%d\n", imaplen); + } + if (!match) + goto fail; + + of_node_put(old); + old = of_node_get(newpar); + addrsize = newaddrsize; + intsize = newintsize; + intspec = imap - intsize; + addr = intspec - addrsize; + + skiplevel: + /* Iterate again with new parent */ + DBG(" -> new parent: %s\n", newpar ? newpar->full_name : "<>"); + of_node_put(ipar); + ipar = newpar; + newpar = NULL; + } + fail: + of_node_put(ipar); + of_node_put(old); + of_node_put(newpar); + + return -EINVAL; +} +EXPORT_SYMBOL_GPL(of_irq_map_raw); + +#if defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) +static int of_irq_map_oldworld(struct device_node *device, int index, + struct of_irq *out_irq) +{ + u32 *ints; + int intlen; + + /* + * Old machines just have a list of interrupt numbers + * and no interrupt-controller nodes. + */ + ints = (u32 *) get_property(device, "AAPL,interrupts", &intlen); + if (ints == NULL) + return -EINVAL; + intlen /= sizeof(u32); + + if (index >= intlen) + return -EINVAL; + + out_irq->controller = NULL; + out_irq->specifier[0] = ints[index]; + out_irq->size = 1; + + return 0; +} +#else /* defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32) */ +static int of_irq_map_oldworld(struct device_node *device, int index, + struct of_irq *out_irq) +{ + return -EINVAL; +} +#endif /* !(defined(CONFIG_PPC_PMAC) && defined(CONFIG_PPC32)) */ + +int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq) +{ + struct device_node *p; + u32 *intspec, *tmp, intsize, intlen, *addr; + int res; + + DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index); + + /* OldWorld mac stuff is "special", handle out of line */ + if (of_irq_workarounds & OF_IMAP_OLDWORLD_MAC) + return of_irq_map_oldworld(device, index, out_irq); + + /* Get the interrupts property */ + intspec = (u32 *)get_property(device, "interrupts", &intlen); + if (intspec == NULL) + return -EINVAL; + intlen /= sizeof(u32); + + /* Get the reg property (if any) */ + addr = (u32 *)get_property(device, "reg", NULL); + + /* Look for the interrupt parent. */ + p = of_irq_find_parent(device); + if (p == NULL) + return -EINVAL; + + /* Get size of interrupt specifier */ + tmp = (u32 *)get_property(p, "#interrupt-cells", NULL); + if (tmp == NULL) { + of_node_put(p); + return -EINVAL; + } + intsize = *tmp; + + DBG(" intsize=%d intlen=%d\n", intsize, intlen); + + /* Check index */ + if ((index + 1) * intsize > intlen) + return -EINVAL; + + /* Get new specifier and map it */ + res = of_irq_map_raw(p, intspec + index * intsize, intsize, + addr, out_irq); + of_node_put(p); + return res; +} +EXPORT_SYMBOL_GPL(of_irq_map_one); + +#ifdef CONFIG_PCI +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + u32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard OF + * parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) + return of_irq_map_one(dn, 0, out_irq); + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { +#ifdef CONFIG_PPC64 + ppnode = pci_bus_to_OF_node(pdev->bus); +#else + struct pci_controller *host; + host = pci_bus_to_host(pdev->bus); + ppnode = host ? host->arch_data : NULL; +#endif + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't include + * the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); + pdev = ppdev; + } + + laddr[0] = (pdev->bus->number << 16) + | (pdev->devfn << 8); + laddr[1] = laddr[2] = 0; + return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); } +EXPORT_SYMBOL_GPL(of_irq_map_pci); +#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 4a4cb5598402..77f1e06d208d 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -569,6 +569,27 @@ int rtas_set_indicator(int indicator, int index, int new_value) } EXPORT_SYMBOL(rtas_set_indicator); +/* + * Ignoring RTAS extended delay + */ +int rtas_set_indicator_fast(int indicator, int index, int new_value) +{ + int rc; + int token = rtas_token("set-indicator"); + + if (token == RTAS_UNKNOWN_SERVICE) + return -ENOENT; + + rc = rtas_call(token, 3, 1, NULL, indicator, index, new_value); + + WARN_ON(rc == -2 || (rc >= 9900 && rc <= 9905)); + + if (rc < 0) + return rtas_error_rc(rc); + + return rc; +} + void rtas_restart(char *cmd) { if (rtas_flash_term_hook) diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 6eb7e49b394a..cda022657324 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -297,19 +297,9 @@ unsigned long __init find_and_init_phbs(void) struct device_node *node; struct pci_controller *phb; unsigned int index; - unsigned int root_size_cells = 0; - unsigned int *opprop = NULL; struct device_node *root = of_find_node_by_path("/"); - if (ppc64_interrupt_controller == IC_OPEN_PIC) { - opprop = (unsigned int *)get_property(root, - "platform-open-pic", NULL); - } - - root_size_cells = prom_n_size_cells(root); - index = 0; - for (node = of_get_next_child(root, NULL); node != NULL; node = of_get_next_child(root, node)) { @@ -324,13 +314,6 @@ unsigned long __init find_and_init_phbs(void) setup_phb(node, phb); pci_process_bridge_OF_ranges(phb, node, 0); pci_setup_phb_io(phb, index == 0); -#ifdef CONFIG_PPC_PSERIES - /* XXX This code need serious fixing ... --BenH */ - if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { - int addr = root_size_cells * (index + 2) - 1; - mpic_assign_isu(pSeries_mpic, index, opprop[addr]); - } -#endif index++; } diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index c6d7b98af7d5..499c3861074f 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -26,7 +26,7 @@ #include <linux/ioport.h> #include <linux/console.h> #include <linux/utsname.h> -#include <linux/tty.h> +#include <linux/screen_info.h> #include <linux/root_dev.h> #include <linux/notifier.h> #include <linux/cpu.h> diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index ba7cd50d820d..e0df2ba1ab9f 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -51,7 +51,6 @@ extern void bootx_init(unsigned long r4, unsigned long phys); -boot_infos_t *boot_infos; struct ide_machdep_calls ppc_ide_md; int boot_cpuid; @@ -240,7 +239,6 @@ void __init setup_arch(char **cmdline_p) ppc_md.init_early(); find_legacy_serial_ports(); - finish_device_tree(); smp_setup_cpu_maps(); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index ac7276c40685..fd1785e4c9bb 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -361,12 +361,15 @@ void __init setup_system(void) /* * Fill the ppc64_caches & systemcfg structures with informations - * retrieved from the device-tree. Need to be called before - * finish_device_tree() since the later requires some of the - * informations filled up here to properly parse the interrupt tree. + * retrieved from the device-tree. */ initialize_cache_info(); + /* + * Initialize irq remapping subsystem + */ + irq_early_init(); + #ifdef CONFIG_PPC_RTAS /* * Initialize RTAS if available @@ -394,12 +397,6 @@ void __init setup_system(void) find_legacy_serial_ports(); /* - * "Finish" the device-tree, that is do the actual parsing of - * some of the properties like the interrupt map - */ - finish_device_tree(); - - /* * Initialize xmon */ #ifdef CONFIG_XMON_DEFAULT @@ -427,8 +424,6 @@ void __init setup_system(void) printk("-----------------------------------------------------\n"); printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); - printk("ppc64_interrupt_controller = 0x%ld\n", - ppc64_interrupt_controller); printk("physicalMemorySize = 0x%lx\n", lmb_phys_mem_size()); printk("ppc64_caches.dcache_line_size = 0x%x\n", ppc64_caches.dline_size); diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c index f19e2e0e61e7..de59c6c31a5b 100644 --- a/arch/powerpc/kernel/smp-tbsync.c +++ b/arch/powerpc/kernel/smp-tbsync.c @@ -45,8 +45,9 @@ void __devinit smp_generic_take_timebase(void) { int cmd; u64 tb; + unsigned long flags; - local_irq_disable(); + local_irq_save(flags); while (!running) barrier(); rmb(); @@ -70,7 +71,7 @@ void __devinit smp_generic_take_timebase(void) set_tb(tb >> 32, tb & 0xfffffffful); enter_contest(tbsync->mark, -1); } - local_irq_enable(); + local_irq_restore(flags); } static int __devinit start_contest(int cmd, long offset, int num) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 46c56cfd1b2f..6a9bc9ce54e0 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -144,13 +144,15 @@ void smp_message_recv(int msg, struct pt_regs *regs) void smp_send_reschedule(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE); } #ifdef CONFIG_DEBUGGER void smp_send_debugger_break(int cpu) { - smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); + if (likely(smp_ops)) + smp_ops->message_pass(cpu, PPC_MSG_DEBUGGER_BREAK); } #endif @@ -158,7 +160,7 @@ void smp_send_debugger_break(int cpu) void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *)) { crash_ipi_function_ptr = crash_ipi_callback; - if (crash_ipi_callback) { + if (crash_ipi_callback && smp_ops) { mb(); smp_ops->message_pass(MSG_ALL_BUT_SELF, PPC_MSG_DEBUGGER_BREAK); } @@ -220,6 +222,9 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); + if (unlikely(smp_ops == NULL)) + return -1; + data.func = func; data.info = info; atomic_set(&data.started, 0); @@ -357,7 +362,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) smp_store_cpu_info(boot_cpuid); cpu_callin_map[boot_cpuid] = 1; - max_cpus = smp_ops->probe(); + if (smp_ops) + max_cpus = smp_ops->probe(); + else + max_cpus = 1; smp_space_timers(max_cpus); @@ -453,7 +461,7 @@ void generic_mach_cpu_die(void) static int __devinit cpu_enable(unsigned int cpu) { - if (smp_ops->cpu_enable) + if (smp_ops && smp_ops->cpu_enable) return smp_ops->cpu_enable(cpu); return -ENOSYS; @@ -467,7 +475,8 @@ int __devinit __cpu_up(unsigned int cpu) if (!cpu_enable(cpu)) return 0; - if (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu)) + if (smp_ops == NULL || + (smp_ops->cpu_bootable && !smp_ops->cpu_bootable(cpu))) return -EINVAL; /* Make sure callin-map entry is 0 (can be leftover a CPU @@ -568,7 +577,8 @@ void __init smp_cpus_done(unsigned int max_cpus) old_mask = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(boot_cpuid)); - smp_ops->setup_cpu(boot_cpuid); + if (smp_ops) + smp_ops->setup_cpu(boot_cpuid); set_cpus_allowed(current, old_mask); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 010435095550..fec228cd0163 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -278,7 +278,7 @@ static void unregister_cpu_online(unsigned int cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static int __devinit sysfs_cpu_notify(struct notifier_block *self, +static int __cpuinit sysfs_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { unsigned int cpu = (unsigned int)(long)hcpu; @@ -296,7 +296,7 @@ static int __devinit sysfs_cpu_notify(struct notifier_block *self, return NOTIFY_OK; } -static struct notifier_block __devinitdata sysfs_cpu_nb = { +static struct notifier_block __cpuinitdata sysfs_cpu_nb = { .notifier_call = sysfs_cpu_notify, }; diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 774c0a3c5019..a124499e65d9 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -125,15 +125,8 @@ static long timezone_offset; unsigned long ppc_proc_freq; unsigned long ppc_tb_freq; -u64 tb_last_jiffy __cacheline_aligned_in_smp; -unsigned long tb_last_stamp; - -/* - * Note that on ppc32 this only stores the bottom 32 bits of - * the timebase value, but that's enough to tell when a jiffy - * has passed. - */ -DEFINE_PER_CPU(unsigned long, last_jiffy); +static u64 tb_last_jiffy __cacheline_aligned_in_smp; +static DEFINE_PER_CPU(u64, last_jiffy); #ifdef CONFIG_VIRT_CPU_ACCOUNTING /* @@ -417,7 +410,7 @@ static __inline__ void timer_check_rtc(void) /* * This version of gettimeofday has microsecond resolution. */ -static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) +static inline void __do_gettimeofday(struct timeval *tv) { unsigned long sec, usec; u64 tb_ticks, xsec; @@ -431,7 +424,12 @@ static inline void __do_gettimeofday(struct timeval *tv, u64 tb_val) * without a divide (and in fact, without a multiply) */ temp_varp = do_gtod.varp; - tb_ticks = tb_val - temp_varp->tb_orig_stamp; + + /* Sampling the time base must be done after loading + * do_gtod.varp in order to avoid racing with update_gtod. + */ + data_barrier(temp_varp); + tb_ticks = get_tb() - temp_varp->tb_orig_stamp; temp_tb_to_xs = temp_varp->tb_to_xs; temp_stamp_xsec = temp_varp->stamp_xsec; xsec = temp_stamp_xsec + mulhdu(tb_ticks, temp_tb_to_xs); @@ -453,7 +451,7 @@ void do_gettimeofday(struct timeval *tv) do { seq = read_seqbegin_irqsave(&xtime_lock, flags); sec = xtime.tv_sec; - nsec = xtime.tv_nsec + tb_ticks_since(tb_last_stamp); + nsec = xtime.tv_nsec + tb_ticks_since(tb_last_jiffy); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); usec = nsec / 1000; while (usec >= 1000000) { @@ -464,7 +462,7 @@ void do_gettimeofday(struct timeval *tv) tv->tv_usec = usec; return; } - __do_gettimeofday(tv, get_tb()); + __do_gettimeofday(tv); } EXPORT_SYMBOL(do_gettimeofday); @@ -650,6 +648,7 @@ void timer_interrupt(struct pt_regs * regs) int next_dec; int cpu = smp_processor_id(); unsigned long ticks; + u64 tb_next_jiffy; #ifdef CONFIG_PPC32 if (atomic_read(&ppc_n_lost_interrupts) != 0) @@ -691,11 +690,13 @@ void timer_interrupt(struct pt_regs * regs) continue; write_seqlock(&xtime_lock); - tb_last_jiffy += tb_ticks_per_jiffy; - tb_last_stamp = per_cpu(last_jiffy, cpu); - do_timer(regs); - timer_recalc_offset(tb_last_jiffy); - timer_check_rtc(); + tb_next_jiffy = tb_last_jiffy + tb_ticks_per_jiffy; + if (per_cpu(last_jiffy, cpu) >= tb_next_jiffy) { + tb_last_jiffy = tb_next_jiffy; + do_timer(regs); + timer_recalc_offset(tb_last_jiffy); + timer_check_rtc(); + } write_sequnlock(&xtime_lock); } @@ -740,7 +741,7 @@ void __init smp_space_timers(unsigned int max_cpus) int i; unsigned long half = tb_ticks_per_jiffy / 2; unsigned long offset = tb_ticks_per_jiffy / max_cpus; - unsigned long previous_tb = per_cpu(last_jiffy, boot_cpuid); + u64 previous_tb = per_cpu(last_jiffy, boot_cpuid); /* make sure tb > per_cpu(last_jiffy, cpu) for all cpus always */ previous_tb -= tb_ticks_per_jiffy; @@ -821,7 +822,7 @@ int do_settimeofday(struct timespec *tv) * and therefore the (jiffies - wall_jiffies) computation * has been removed. */ - tb_delta = tb_ticks_since(tb_last_stamp); + tb_delta = tb_ticks_since(tb_last_jiffy); tb_delta = mulhdu(tb_delta, do_gtod.varp->tb_to_xs); /* in xsec */ new_nsec -= SCALE_XSEC(tb_delta, 1000000000); @@ -941,8 +942,7 @@ void __init time_init(void) if (__USE_RTC()) { /* 601 processor: dec counts down by 128 every 128ns */ ppc_tb_freq = 1000000000; - tb_last_stamp = get_rtcl(); - tb_last_jiffy = tb_last_stamp; + tb_last_jiffy = get_rtcl(); } else { /* Normal PowerPC with timebase register */ ppc_md.calibrate_decr(); @@ -950,7 +950,7 @@ void __init time_init(void) ppc_tb_freq / 1000000, ppc_tb_freq % 1000000); printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n", ppc_proc_freq / 1000000, ppc_proc_freq % 1000000); - tb_last_stamp = tb_last_jiffy = get_tb(); + tb_last_jiffy = get_tb(); } tb_ticks_per_jiffy = ppc_tb_freq / HZ; @@ -1027,7 +1027,7 @@ void __init time_init(void) do_gtod.varp = &do_gtod.vars[0]; do_gtod.var_idx = 0; do_gtod.varp->tb_orig_stamp = tb_last_jiffy; - __get_cpu_var(last_jiffy) = tb_last_stamp; + __get_cpu_var(last_jiffy) = tb_last_jiffy; do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC; do_gtod.tb_ticks_per_sec = tb_ticks_per_sec; do_gtod.varp->tb_to_xs = tb_to_xs; diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 3c668078e524..9b352bd0a460 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,9 +55,6 @@ #ifdef CONFIG_PPC64 /* XXX */ #define _IO_BASE pci_io_base -#ifdef CONFIG_KEXEC -cpumask_t cpus_in_sr = CPU_MASK_NONE; -#endif #endif #ifdef CONFIG_DEBUGGER @@ -150,13 +147,9 @@ int die(const char *str, struct pt_regs *regs, long err) if (in_interrupt()) panic("Fatal exception in interrupt"); - if (panic_on_oops) { -#ifdef CONFIG_PPC64 - printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n"); - ssleep(5); -#endif + if (panic_on_oops) panic("Fatal exception"); - } + do_exit(err); return 0; @@ -215,6 +208,19 @@ void system_reset_exception(struct pt_regs *regs) die("System Reset", regs, SIGABRT); + /* + * Some CPUs when released from the debugger will execute this path. + * These CPUs entered the debugger via a soft-reset. If the CPU was + * hung before entering the debugger it will return to the hung + * state when exiting this function. This causes a problem in + * kdump since the hung CPU(s) will not respond to the IPI sent + * from kdump. To prevent the problem we call crash_kexec_secondary() + * here. If a kdump had not been initiated or we exit the debugger + * with the "exit and recover" command (x) crash_kexec_secondary() + * will return after 5ms and the CPU returns to its previous state. + */ + crash_kexec_secondary(regs); + /* Must die if the interrupt is not recoverable */ if (!(regs->msr & MSR_RI)) panic("Unrecoverable System Reset"); @@ -579,14 +585,14 @@ static void parse_fpe(struct pt_regs *regs) #define INST_MFSPR_PVR_MASK 0xfc1fffff #define INST_DCBA 0x7c0005ec -#define INST_DCBA_MASK 0x7c0007fe +#define INST_DCBA_MASK 0xfc0007fe #define INST_MCRXR 0x7c000400 -#define INST_MCRXR_MASK 0x7c0007fe +#define INST_MCRXR_MASK 0xfc0007fe #define INST_STRING 0x7c00042a -#define INST_STRING_MASK 0x7c0007fe -#define INST_STRING_GEN_MASK 0x7c00067e +#define INST_STRING_MASK 0xfc0007fe +#define INST_STRING_GEN_MASK 0xfc00067e #define INST_LSWI 0x7c0004aa #define INST_LSWX 0x7c00042a #define INST_STSWI 0x7c0005aa diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 0835b4841dea..2d17f2b8eda7 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -81,10 +81,14 @@ static int udbg_550_getc(void) void udbg_init_uart(void __iomem *comport, unsigned int speed, unsigned int clock) { - unsigned int dll, base_bauds = clock / 16; + unsigned int dll, base_bauds; + if (clock == 0) + clock = 1843200; if (speed == 0) speed = 9600; + + base_bauds = clock / 16; dll = base_bauds / speed; if (comport) { diff --git a/arch/powerpc/kernel/vdso32/Makefile b/arch/powerpc/kernel/vdso32/Makefile index 8a3bed5f143a..3726358faae8 100644 --- a/arch/powerpc/kernel/vdso32/Makefile +++ b/arch/powerpc/kernel/vdso32/Makefile @@ -14,7 +14,8 @@ obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 +EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) EXTRA_AFLAGS := -D__VDSO32__ -s obj-y += vdso32_wrapper.o diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index f4bad720cb0a..6187af2d54c3 100644 --- a/arch/powerpc/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -14,6 +14,7 @@ SECTIONS { . = VDSO32_LBASE + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/powerpc/kernel/vdso64/Makefile b/arch/powerpc/kernel/vdso64/Makefile index ab39988452cc..43af9b2a6f3b 100644 --- a/arch/powerpc/kernel/vdso64/Makefile +++ b/arch/powerpc/kernel/vdso64/Makefile @@ -8,7 +8,8 @@ targets := $(obj-vdso64) vdso64.so obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 +EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \ + $(call ld-option, -Wl$(comma)--hash-style=sysv) EXTRA_AFLAGS := -D__VDSO64__ -s obj-y += vdso64_wrapper.o diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 4bdf224464ab..4a2b6dc0960c 100644 --- a/arch/powerpc/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -12,6 +12,7 @@ SECTIONS { . = VDSO64_LBASE + SIZEOF_HEADERS; .hash : { *(.hash) } :text + .gnu.hash : { *(.gnu.hash) } .dynsym : { *(.dynsym) } .dynstr : { *(.dynstr) } .gnu.version : { *(.gnu.version) } diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index cdf5867838a6..fad8580f9081 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -218,7 +218,6 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) { struct vio_dev *viodev; unsigned int *unit_address; - unsigned int *irq_p; /* we need the 'device_type' property, in order to match with drivers */ if (of_node->type == NULL) { @@ -243,16 +242,7 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) viodev->dev.platform_data = of_node_get(of_node); - viodev->irq = NO_IRQ; - irq_p = (unsigned int *)get_property(of_node, "interrupts", NULL); - if (irq_p) { - int virq = virt_irq_create_mapping(*irq_p); - if (virq == NO_IRQ) { - printk(KERN_ERR "Unable to allocate interrupt " - "number for %s\n", of_node->full_name); - } else - viodev->irq = irq_offset_up(virq); - } + viodev->irq = irq_of_parse_and_map(of_node, 0); snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address); viodev->name = of_node->name; diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index fd66acfd3e3e..7173ba98f427 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -11,6 +11,7 @@ .align 7 _GLOBAL(memcpy) + std r3,48(r1) /* save destination pointer for return value */ mtcrf 0x01,r5 cmpldi cr1,r5,16 neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry @@ -38,7 +39,7 @@ _GLOBAL(memcpy) stdu r9,16(r3) bdnz 1b 3: std r8,8(r3) - beqlr + beq 3f addi r3,r3,16 ld r9,8(r4) .Ldo_tail: @@ -53,7 +54,8 @@ _GLOBAL(memcpy) 2: bf cr7*4+3,3f rotldi r9,r9,8 stb r9,0(r3) -3: blr +3: ld r3,48(r1) /* return dest pointer */ + blr .Lsrc_unaligned: srdi r6,r5,3 @@ -115,7 +117,7 @@ _GLOBAL(memcpy) 5: srd r12,r9,r11 or r12,r8,r12 std r12,24(r3) - beqlr + beq 4f cmpwi cr1,r5,8 addi r3,r3,32 sld r9,r9,r10 @@ -167,4 +169,5 @@ _GLOBAL(memcpy) 3: bf cr7*4+3,4f lbz r0,0(r4) stb r0,0(r3) -4: blr +4: ld r3,48(r1) /* return dest pointer */ + blr diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c index 376829ed2211..0a0a0487b334 100644 --- a/arch/powerpc/mm/44x_mmu.c +++ b/arch/powerpc/mm/44x_mmu.c @@ -103,7 +103,7 @@ unsigned long __init mmu_mapin_ram(void) /* Determine number of entries necessary to cover lowmem */ pinned_tlbs = (unsigned int) - (_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT); + (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT); /* Write upper watermark to save location */ tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs; @@ -111,7 +111,7 @@ unsigned long __init mmu_mapin_ram(void) /* If necessary, set additional pinned TLBs */ if (pinned_tlbs > 1) for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) { - unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE; + unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE; ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr); } diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 266b8b2ceac9..5615acc29527 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -153,7 +153,7 @@ static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp) hpdp->pd = 0; tlb->need_flush = 1; pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM, - HUGEPTE_TABLE_SIZE-1)); + PGF_CACHENUM_MASK)); } #ifdef CONFIG_PPC_64K_PAGES diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 4b17a7359924..716a2906a24d 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -320,7 +320,8 @@ void __init lmb_enforce_memory_limit(unsigned long memory_limit) break; } - lmb.rmo_size = lmb.memory.region[0].size; + if (lmb.memory.region[0].size < lmb.rmo_size) + lmb.rmo_size = lmb.memory.region[0].size; /* And truncate any reserves above the limit also. */ for (i = 0; i < lmb.reserved.cnt; i++) { diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 7675e675dce1..5fe7b7faf45f 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -16,12 +16,21 @@ config MPC834x_SYS 3 PCI slots. The PIBs PCI initialization is the bootloader's responsiblilty. +config MPC834x_ITX + bool "Freescale MPC834x ITX" + select DEFAULT_UIMAGE + help + This option enables support for the MPC 834x ITX evaluation board. + + Be aware that PCI initialization is the bootloader's + responsiblilty. + endchoice config MPC834x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC834x_SYS + default y if MPC834x_SYS || MPC834x_ITX endmenu diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 5c72367441a8..9387a110d28a 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,3 +4,4 @@ obj-y := misc.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o +obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c new file mode 100644 index 000000000000..cf3967a66fb5 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -0,0 +1,125 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_itx.c + * + * MPC834x ITX board specific routines + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> + +#include "mpc83xx.h" + +#include <platforms/83xx/mpc834x_sys.h> + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc834x_itx_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc834x_itx_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + unsigned int *fp = + (int *)get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +void __init mpc834x_itx_init_IRQ(void) +{ + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc834x_itx_probe(void) +{ + /* We always match for now, eventually we should look at the flat + dev tree to ensure this is the board we are suppose to run on + */ + return 1; +} + +define_machine(mpc834x_itx) { + .name = "MPC834x ITX", + .probe = mpc834x_itx_probe, + .setup_arch = mpc834x_itx_setup_arch, + .init_IRQ = mpc834x_itx_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup = mpc83xx_pcibios_fixup, +#endif +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.h b/arch/powerpc/platforms/83xx/mpc834x_itx.h new file mode 100644 index 000000000000..174ca4ef55f3 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.h @@ -0,0 +1,23 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_itx.h + * + * MPC834X ITX common board definitions + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MACH_MPC83XX_ITX_H__ +#define __MACH_MPC83XX_ITX_H__ + +#define PIRQA MPC83xx_IRQ_EXT4 +#define PIRQB MPC83xx_IRQ_EXT5 +#define PIRQC MPC83xx_IRQ_EXT6 +#define PIRQD MPC83xx_IRQ_EXT7 + +#endif /* __MACH_MPC83XX_ITX_H__ */ diff --git a/arch/powerpc/platforms/83xx/mpc834x_sys.c b/arch/powerpc/platforms/83xx/mpc834x_sys.c index 3e1c16eb4a63..32df239d1c48 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_sys.c +++ b/arch/powerpc/platforms/83xx/mpc834x_sys.c @@ -43,33 +43,6 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -#ifdef CONFIG_PCI -static int -mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ - {0, 0, 0, 0}, - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ - {0, 0, 0, 0}, /* idsel 0x19 */ - {0, 0, 0, 0}, /* idsel 0x20 */ - }; - - const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} -#endif /* CONFIG_PCI */ - /* ************************************************************************ * * Setup the architecture @@ -96,8 +69,6 @@ static void __init mpc834x_sys_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc83xx_map_irq; ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif @@ -110,25 +81,13 @@ static void __init mpc834x_sys_setup_arch(void) void __init mpc834x_sys_init_IRQ(void) { - u8 senses[8] = { - 0, /* EXT 0 */ - IRQ_SENSE_LEVEL, /* EXT 1 */ - IRQ_SENSE_LEVEL, /* EXT 2 */ - 0, /* EXT 3 */ -#ifdef CONFIG_PCI - IRQ_SENSE_LEVEL, /* EXT 4 */ - IRQ_SENSE_LEVEL, /* EXT 5 */ - IRQ_SENSE_LEVEL, /* EXT 6 */ - IRQ_SENSE_LEVEL, /* EXT 7 */ -#else - 0, /* EXT 4 */ - 0, /* EXT 5 */ - 0, /* EXT 6 */ - 0, /* EXT 7 */ -#endif - }; + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; - ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8); + ipic_init(np, 0); /* Initialize the default interrupt mapping priorities, * in case the boot rom changed something on us. @@ -178,4 +137,7 @@ define_machine(mpc834x_sys) { .time_init = mpc83xx_time_init, .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup = mpc83xx_pcibios_fixup, +#endif }; diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index 01cae106912b..2c82bca9bfbb 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -11,6 +11,7 @@ extern int add_bridge(struct device_node *dev); extern int mpc83xx_exclude_device(u_char bus, u_char devfn); +extern void mpc83xx_pcibios_fixup(void); extern void mpc83xx_restart(char *cmd); extern long mpc83xx_time_init(void); diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index 3b5e563c279f..5d84a9ccd103 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -45,6 +45,15 @@ int mpc83xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } +void __init mpc83xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + /* map all the PCI irqs */ + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + int __init add_bridge(struct device_node *dev) { int len; diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 454fc53289ab..c3268d9877e4 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -14,7 +14,6 @@ config MPC8540_ADS config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE - select PPC_I8259 if PCI help This option enables support for the MPC85xx CDS board diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 06a497676c99..9d2acfbbeccd 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -37,79 +37,7 @@ unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ - -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * This is little evil, but works around the fact - * that revA boards have IDSEL starting at 18 - * and others boards (older) start at 12 - * - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ - }; - - const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - int mpc85xx_exclude_device(u_char bus, u_char devfn) { @@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn) return PCIBIOS_SUCCESSFUL; } +void __init +mpc85xx_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} #endif /* CONFIG_PCI */ void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; - - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; - - mpic1 = mpic_alloc(OpenPIC_PAddr, - MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_ads_openpic_initsenses, - sizeof(mpc85xx_ads_openpic_initsenses), - " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - mpic_init(mpic1); + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if(of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Could not map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Unused on this platform (leave room for 8548) */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); } /* @@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void) static void __init mpc85xx_ads_setup_arch(void) { struct device_node *cpu; +#ifdef CONFIG_PCI struct device_node *np; +#endif if (ppc_md.progress) ppc_md.progress("mpc85xx_ads_setup_arch()", 0); @@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; + ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 18e6e11f7020..1d357d32a29f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -57,94 +57,8 @@ unsigned long isa_mem_base = 0; static int cds_pci_slot = 2; static volatile u8 *cadmus; -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - * - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Ext 0: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 3 */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#ifdef CONFIG_PCI - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} #define ARCADIA_HOST_BRIDGE_IDSEL 17 #define ARCADIA_2ND_BRIDGE_IDSEL 3 @@ -210,50 +124,104 @@ mpc85xx_cds_pcibios_fixup(void) pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); pci_dev_put(dev); } + + /* Now map all the PCI irqs */ + dev = NULL; + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + +#ifdef CONFIG_PPC_I8259 +#warning The i8259 PIC support is currently broken +static void mpc85xx_8259_cascade(unsigned int irq, struct + irq_desc *desc, struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + + desc->chip->eoi(irq); } +#endif /* PPC_I8259 */ #endif /* CONFIG_PCI */ void __init mpc85xx_cds_pic_init(void) { - struct mpic *mpic1; - phys_addr_t OpenPIC_PAddr; + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; + struct device_node *cascade_node = NULL; + int cascade_irq; - /* Determine the Physical Address of the OpenPIC regs */ - OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET; + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } - mpic1 = mpic_alloc(OpenPIC_PAddr, + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc85xx_cds_openpic_initsenses, - sizeof(mpc85xx_cds_openpic_initsenses), " OpenPIC "); - BUG_ON(mpic1 == NULL); - mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200); - mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280); - mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300); - mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380); - mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400); - mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480); - mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500); - mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580); - - /* dummy mappings to get to 48 */ - mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600); - mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680); - mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700); - mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780); - - /* External ints */ - mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000); - mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080); - mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100); - - mpic_init(mpic1); + 4, 0, " OpenPIC "); + BUG_ON(mpic == NULL); + + /* Return the mpic node */ + of_node_put(np); + + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10280); + mpic_assign_isu(mpic, 2, r.start + 0x10300); + mpic_assign_isu(mpic, 3, r.start + 0x10380); + mpic_assign_isu(mpic, 4, r.start + 0x10400); + mpic_assign_isu(mpic, 5, r.start + 0x10480); + mpic_assign_isu(mpic, 6, r.start + 0x10500); + mpic_assign_isu(mpic, 7, r.start + 0x10580); + + /* Used only for 8548 so far, but no harm in + * allocating them for everyone */ + mpic_assign_isu(mpic, 8, r.start + 0x10600); + mpic_assign_isu(mpic, 9, r.start + 0x10680); + mpic_assign_isu(mpic, 10, r.start + 0x10700); + mpic_assign_isu(mpic, 11, r.start + 0x10780); + + /* External Interrupts */ + mpic_assign_isu(mpic, 12, r.start + 0x10000); + mpic_assign_isu(mpic, 13, r.start + 0x10080); + mpic_assign_isu(mpic, 14, r.start + 0x10100); + + mpic_init(mpic); + +#ifdef CONFIG_PPC_I8259 + /* Initialize the i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_DEBUG "Could not find i8259 PIC\n"); + return; + } -#ifdef CONFIG_PCI - mpic_setup_cascade(PIRQ0A, i8259_irq_cascade, NULL); + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade interrupt\n"); + return; + } - i8259_init(0,0); -#endif + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + + set_irq_chained_handler(cascade_irq, mpc85xx_8259_cascade); +#endif /* CONFIG_PPC_I8259 */ } @@ -298,8 +266,6 @@ mpc85xx_cds_setup_arch(void) add_bridge(np); ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; ppc_md.pci_exclude_device = mpc85xx_exclude_device; #endif diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h index 5d2bcf78cef7..41e554c4af94 100644 --- a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -16,38 +16,6 @@ #include <linux/init.h> -/* PCI interrupt controller */ -#define PIRQA 3 -#define PIRQB 4 -#define PIRQC 5 -#define PIRQD 6 -#define PIRQ7 7 -#define PIRQE 9 -#define PIRQF 10 -#define PIRQG 11 -#define PIRQH 12 - -/* PCI-Express memory map */ -#define MPC86XX_PCIE_LOWER_IO 0x00000000 -#define MPC86XX_PCIE_UPPER_IO 0x00ffffff - -#define MPC86XX_PCIE_LOWER_MEM 0x80000000 -#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff - -#define MPC86XX_PCIE_IO_BASE 0xe2000000 -#define MPC86XX_PCIE_MEM_OFFSET 0x00000000 - -#define MPC86XX_PCIE_IO_SIZE 0x01000000 - -#define PCIE1_CFG_ADDR_OFFSET (0x8000) -#define PCIE1_CFG_DATA_OFFSET (0x8004) - -#define PCIE2_CFG_ADDR_OFFSET (0x9000) -#define PCIE2_CFG_DATA_OFFSET (0x9004) - -#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET -#define MPC86xx_PCIE_SIZE (0x1000) - #define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ #endif /* __MPC8641_HPCN_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index ebae73eb0063..5e583cf38786 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -37,6 +37,14 @@ #include "mpc86xx.h" #include "mpc8641_hpcn.h" +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt...) do { printk(KERN_ERR fmt); } while(0) +#else +#define DBG(fmt...) do { } while(0) +#endif + #ifndef CONFIG_PCI unsigned long isa_io_base = 0; unsigned long isa_mem_base = 0; @@ -44,205 +52,219 @@ unsigned long pci_dram_offset = 0; #endif -/* - * Internal interrupts are all Level Sensitive, and Positive Polarity - */ - -static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ - 0x0, /* External 11: */ - 0x0, - 0x0, - 0x0, - 0x0, -}; - +#ifdef CONFIG_PCI +static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); +} +#endif /* CONFIG_PCI */ void __init mpc86xx_hpcn_init_irq(void) { struct mpic *mpic1; - phys_addr_t openpic_paddr; + struct device_node *np; + struct resource res; +#ifdef CONFIG_PCI + struct device_node *cascade_node = NULL; + int cascade_irq; +#endif - /* Determine the Physical Address of the OpenPIC regs */ - openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; + /* Determine PIC address. */ + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + of_address_to_resource(np, 0, &res); /* Alloc mpic structure and per isu has 16 INT entries. */ - mpic1 = mpic_alloc(openpic_paddr, + mpic1 = mpic_alloc(np, res.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, - 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, - mpc86xx_hpcn_openpic_initsenses, - sizeof(mpc86xx_hpcn_openpic_initsenses), + 16, NR_IRQS - 4, " MPIC "); BUG_ON(mpic1 == NULL); + mpic_assign_isu(mpic1, 0, res.start + 0x10000); + /* 48 Internal Interrupts */ - mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); - mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); - mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + mpic_assign_isu(mpic1, 1, res.start + 0x10200); + mpic_assign_isu(mpic1, 2, res.start + 0x10400); + mpic_assign_isu(mpic1, 3, res.start + 0x10600); - /* 16 External interrupts */ - mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + /* 16 External interrupts + * Moving them from [0 - 15] to [64 - 79] + */ + mpic_assign_isu(mpic1, 4, res.start + 0x10000); mpic_init(mpic1); #ifdef CONFIG_PCI - mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); - i8259_init(0, I8259_OFFSET); -#endif -} + /* Initialize i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + if (cascade_node == NULL) { + printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n"); + return; + } + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt"); + return; + } + DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq); + i8259_init(cascade_node, 0); + set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade); +#endif +} #ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH}; +const unsigned char uli1575_irq_route_table[16] = { + 0, /* 0: Reserved */ + 0x8, /* 1: 0b1000 */ + 0, /* 2: Reserved */ + 0x2, /* 3: 0b0010 */ + 0x4, /* 4: 0b0100 */ + 0x5, /* 5: 0b0101 */ + 0x7, /* 6: 0b0111 */ + 0x6, /* 7: 0b0110 */ + 0, /* 8: Reserved */ + 0x1, /* 9: 0b0001 */ + 0x3, /* 10: 0b0011 */ + 0x9, /* 11: 0b1001 */ + 0xb, /* 12: 0b1011 */ + 0, /* 13: Reserved */ + 0xd, /* 14, 0b1101 */ + 0xf, /* 15, 0b1111 */ +}; + +static int __devinit +get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin) { - static char pci_irq_table[][4] = { - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ - {0, 0, 0, 0}, /* IDSEL 19 */ - {0, 0, 0, 0}, /* IDSEL 20 */ - {0, 0, 0, 0}, /* IDSEL 21 */ - {0, 0, 0, 0}, /* IDSEL 22 */ - {0, 0, 0, 0}, /* IDSEL 23 */ - {0, 0, 0, 0}, /* IDSEL 24 */ - {0, 0, 0, 0}, /* IDSEL 25 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ - {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ - {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ - {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ - {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ - {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ - }; - - const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; + struct of_irq oirq; + u32 laddr[3]; + struct device_node *hosenode = hose ? hose->arch_data : NULL; + + if (!hosenode) return -EINVAL; + + laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8); + laddr[1] = laddr[2] = 0; + of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); + DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n", + laddr[0], slot, pin, oirq.specifier[0]); + return oirq.specifier[0]; } -static void __devinit quirk_ali1575(struct pci_dev *dev) +static void __devinit quirk_uli1575(struct pci_dev *dev) { unsigned short temp; + struct pci_controller *hose = pci_bus_to_host(dev->bus); + unsigned char irq2pin[16]; + unsigned long pirq_map_word = 0; + u32 irq; + int i; + + /* + * ULI1575 interrupts route setup + */ + memset(irq2pin, 0, 16); /* Initialize default value 0 */ + + /* + * PIRQA -> PIRQD mapping read from OF-tree + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + for (i = 0; i < 4; i++){ + irq = get_pci_irq_from_of(hose, 17, i + 1); + if (irq > 0 && irq < 16) + irq2pin[irq] = PIRQA + i; + else + printk(KERN_WARNING "ULI1575 device" + "(slot %d, pin %d) irq %d is invalid.\n", + 17, i, irq); + } /* - * ALI1575 interrupts route table setup: + * PIRQE -> PIRQF mapping set manually * * IRQ pin IRQ# - * PIRQA ---- 3 - * PIRQB ---- 4 - * PIRQC ---- 5 - * PIRQD ---- 6 * PIRQE ---- 9 * PIRQF ---- 10 * PIRQG ---- 11 * PIRQH ---- 12 - * - * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD - * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA */ - pci_write_config_dword(dev, 0x48, 0xb9317542); + for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i; + + /* Set IRQ-PIRQ Mapping to ULI1575 */ + for (i = 0; i < 16; i++) + if (irq2pin[i]) + pirq_map_word |= (uli1575_irq_route_table[i] & 0xf) + << ((irq2pin[i] - PIRQA) * 4); + + /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */ + DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n", + pirq_map_word); + pci_write_config_dword(dev, 0x48, pirq_map_word); + +#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \ + do { \ + int irq; \ + irq = get_pci_irq_from_of(hose, slot, pin); \ + if (irq > 0 && irq < 16) \ + pci_write_config_byte(dev, reg, irq2pin[irq]); \ + else \ + printk(KERN_WARNING "ULI1575 device" \ + "(slot %d, pin %d) irq %d is invalid.\n", \ + slot, pin, irq); \ + } while(0) - /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x86, 0x0c); + /* USB 1.1 OHCI controller 1, slot 28, pin 1 */ + ULI1575_SET_DEV_IRQ(28, 1, 0x86); - /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x87, 0x0d); + /* USB 1.1 OHCI controller 2, slot 28, pin 2 */ + ULI1575_SET_DEV_IRQ(28, 2, 0x87); - /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ - pci_write_config_byte(dev, 0x88, 0x0f); + /* USB 1.1 OHCI controller 3, slot 28, pin 3 */ + ULI1575_SET_DEV_IRQ(28, 3, 0x88); - /* USB 2.0 controller, interrupt: PIRQ7 */ - pci_write_config_byte(dev, 0x74, 0x06); + /* USB 2.0 controller, slot 28, pin 4 */ + irq = get_pci_irq_from_of(hose, 28, 4); + if (irq >= 0 && irq <=15) + pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]); - /* Audio controller, interrupt: PIRQE */ - pci_write_config_byte(dev, 0x8a, 0x0c); + /* Audio controller, slot 29, pin 1 */ + ULI1575_SET_DEV_IRQ(29, 1, 0x8a); - /* Modem controller, interrupt: PIRQF */ - pci_write_config_byte(dev, 0x8b, 0x0d); + /* Modem controller, slot 29, pin 2 */ + ULI1575_SET_DEV_IRQ(29, 2, 0x8b); - /* HD audio controller, interrupt: PIRQG */ - pci_write_config_byte(dev, 0x8c, 0x0e); + /* HD audio controller, slot 29, pin 3 */ + ULI1575_SET_DEV_IRQ(29, 3, 0x8c); - /* Serial ATA interrupt: PIRQD */ - pci_write_config_byte(dev, 0x8d, 0x0b); + /* SMB interrupt: slot 30, pin 1 */ + ULI1575_SET_DEV_IRQ(30, 1, 0x8e); - /* SMB interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8e, 0x0f); + /* PMU ACPI SCI interrupt: slot 30, pin 2 */ + ULI1575_SET_DEV_IRQ(30, 2, 0x8f); - /* PMU ACPI SCI interrupt: PIRQH */ - pci_write_config_byte(dev, 0x8f, 0x0f); + /* Serial ATA interrupt: slot 31, pin 1 */ + ULI1575_SET_DEV_IRQ(31, 1, 0x8d); /* Primary PATA IDE IRQ: 14 * Secondary PATA IDE IRQ: 15 */ - pci_write_config_byte(dev, 0x44, 0x3d); - pci_write_config_byte(dev, 0x75, 0x0f); + pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]); + pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]); /* Set IRQ14 and IRQ15 to legacy IRQs */ pci_read_config_word(dev, 0x46, &temp); @@ -264,6 +286,8 @@ static void __devinit quirk_ali1575(struct pci_dev *dev) */ outb(0xfa, 0x4d0); outb(0x1e, 0x4d1); + +#undef ULI1575_SET_DEV_IRQ } static void __devinit quirk_uli5288(struct pci_dev *dev) @@ -306,7 +330,7 @@ static void __devinit early_uli5249(struct pci_dev *dev) dev->class |= 0x1; } -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); @@ -337,8 +361,6 @@ mpc86xx_hpcn_setup_arch(void) for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) add_bridge(np); - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc86xx_map_irq; ppc_md.pci_exclude_device = mpc86xx_exclude_device; #endif @@ -377,6 +399,15 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) } +void __init mpc86xx_hpcn_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + + /* * Called very early, device-tree isn't unflattened */ @@ -431,6 +462,7 @@ define_machine(mpc86xx_hpcn) { .setup_arch = mpc86xx_hpcn_setup_arch, .init_IRQ = mpc86xx_hpcn_init_irq, .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, + .pcibios_fixup = mpc86xx_hpcn_pcibios_fixup, .get_irq = mpic_get_irq, .restart = mpc86xx_restart, .time_init = mpc86xx_time_init, diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c index bc5139043112..a8c8f0a44055 100644 --- a/arch/powerpc/platforms/86xx/pci.c +++ b/arch/powerpc/platforms/86xx/pci.c @@ -188,7 +188,8 @@ int __init add_bridge(struct device_node *dev) printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. " "Firmware bus number: %d->%d\n", - rsrc.start, hose->first_busno, hose->last_busno); + (unsigned long) rsrc.start, + hose->first_busno, hose->last_busno); DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", hose, hose->cfg_addr, hose->cfg_data); diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 22da1335445a..d7bbb61109f9 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -1,6 +1,9 @@ /* * Cell Internal Interrupt Controller * + * Copyright (C) 2006 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * IBM, Corp. + * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * * Author: Arnd Bergmann <arndb@de.ibm.com> @@ -25,11 +28,13 @@ #include <linux/module.h> #include <linux/percpu.h> #include <linux/types.h> +#include <linux/ioport.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/ptrace.h> +#include <asm/machdep.h> #include "interrupt.h" #include "cbe_regs.h" @@ -37,231 +42,65 @@ struct iic { struct cbe_iic_thread_regs __iomem *regs; u8 target_id; + u8 eoi_stack[16]; + int eoi_ptr; + struct irq_host *host; }; static DEFINE_PER_CPU(struct iic, iic); +#define IIC_NODE_COUNT 2 +static struct irq_host *iic_hosts[IIC_NODE_COUNT]; -void iic_local_enable(void) +/* Convert between "pending" bits and hw irq number */ +static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits) { - struct iic *iic = &__get_cpu_var(iic); - u64 tmp; - - /* - * There seems to be a bug that is present in DD2.x CPUs - * and still only partially fixed in DD3.1. - * This bug causes a value written to the priority register - * not to make it there, resulting in a system hang unless we - * write it again. - * Masking with 0xf0 is done because the Cell BE does not - * implement the lower four bits of the interrupt priority, - * they always read back as zeroes, although future CPUs - * might implement different bits. - */ - do { - out_be64(&iic->regs->prio, 0xff); - tmp = in_be64(&iic->regs->prio); - } while ((tmp & 0xf0) != 0xf0); -} - -void iic_local_disable(void) -{ - out_be64(&__get_cpu_var(iic).regs->prio, 0x0); -} + unsigned char unit = bits.source & 0xf; -static unsigned int iic_startup(unsigned int irq) -{ - return 0; + if (bits.flags & CBE_IIC_IRQ_IPI) + return IIC_IRQ_IPI0 | (bits.prio >> 4); + else if (bits.class <= 3) + return (bits.class << 4) | unit; + else + return IIC_IRQ_INVALID; } -static void iic_enable(unsigned int irq) +static void iic_mask(unsigned int irq) { - iic_local_enable(); } -static void iic_disable(unsigned int irq) +static void iic_unmask(unsigned int irq) { } -static void iic_end(unsigned int irq) +static void iic_eoi(unsigned int irq) { - iic_local_enable(); + struct iic *iic = &__get_cpu_var(iic); + out_be64(&iic->regs->prio, iic->eoi_stack[--iic->eoi_ptr]); + BUG_ON(iic->eoi_ptr < 0); } -static struct hw_interrupt_type iic_pic = { +static struct irq_chip iic_chip = { .typename = " CELL-IIC ", - .startup = iic_startup, - .enable = iic_enable, - .disable = iic_disable, - .end = iic_end, + .mask = iic_mask, + .unmask = iic_unmask, + .eoi = iic_eoi, }; -static int iic_external_get_irq(struct cbe_iic_pending_bits pending) -{ - int irq; - unsigned char node, unit; - - node = pending.source >> 4; - unit = pending.source & 0xf; - irq = -1; - - /* - * This mapping is specific to the Cell Broadband - * Engine. We might need to get the numbers - * from the device tree to support future CPUs. - */ - switch (unit) { - case 0x00: - case 0x0b: - /* - * One of these units can be connected - * to an external interrupt controller. - */ - if (pending.class != 2) - break; - irq = IIC_EXT_OFFSET - + spider_get_irq(node) - + node * IIC_NODE_STRIDE; - break; - case 0x01 ... 0x04: - case 0x07 ... 0x0a: - /* - * These units are connected to the SPEs - */ - if (pending.class > 2) - break; - irq = IIC_SPE_OFFSET - + pending.class * IIC_CLASS_STRIDE - + node * IIC_NODE_STRIDE - + unit; - break; - } - if (irq == -1) - printk(KERN_WARNING "Unexpected interrupt class %02x, " - "source %02x, prio %02x, cpu %02x\n", pending.class, - pending.source, pending.prio, smp_processor_id()); - return irq; -} - /* Get an IRQ number from the pending state register of the IIC */ -int iic_get_irq(struct pt_regs *regs) +static unsigned int iic_get_irq(struct pt_regs *regs) { - struct iic *iic; - int irq; - struct cbe_iic_pending_bits pending; - - iic = &__get_cpu_var(iic); - *(unsigned long *) &pending = - in_be64((unsigned long __iomem *) &iic->regs->pending_destr); - - irq = -1; - if (pending.flags & CBE_IIC_IRQ_VALID) { - if (pending.flags & CBE_IIC_IRQ_IPI) { - irq = IIC_IPI_OFFSET + (pending.prio >> 4); -/* - if (irq > 0x80) - printk(KERN_WARNING "Unexpected IPI prio %02x" - "on CPU %02x\n", pending.prio, - smp_processor_id()); -*/ - } else { - irq = iic_external_get_irq(pending); - } - } - return irq; -} - -/* hardcoded part to be compatible with older firmware */ - -static int setup_iic_hardcoded(void) -{ - struct device_node *np; - int nodeid, cpu; - unsigned long regs; - struct iic *iic; - - for_each_possible_cpu(cpu) { - iic = &per_cpu(iic, cpu); - nodeid = cpu/2; - - for (np = of_find_node_by_type(NULL, "cpu"); - np; - np = of_find_node_by_type(np, "cpu")) { - if (nodeid == *(int *)get_property(np, "node-id", NULL)) - break; - } - - if (!np) { - printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } - - regs = *(long *)get_property(np, "iic", NULL); - - /* hack until we have decided on the devtree info */ - regs += 0x400; - if (cpu & 1) - regs += 0x20; - - printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs); - iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs)); - iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); - } - - return 0; -} - -static int setup_iic(void) -{ - struct device_node *dn; - unsigned long *regs; - char *compatible; - unsigned *np, found = 0; - struct iic *iic = NULL; - - for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { - compatible = (char *)get_property(dn, "compatible", NULL); - - if (!compatible) { - printk(KERN_WARNING "no compatible property found !\n"); - continue; - } - - if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller")) - regs = (unsigned long *)get_property(dn,"reg", NULL); - else - continue; - - if (!regs) - printk(KERN_WARNING "IIC: no reg property\n"); - - np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL); - - if (!np) { - printk(KERN_WARNING "IIC: CPU association not found\n"); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } - - iic = &per_cpu(iic, np[0]); - iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs)); - iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe); - printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs); - - iic = &per_cpu(iic, np[1]); - iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs)); - iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe); - printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs); - - found++; - } - - if (found) - return 0; - else - return -ENODEV; + struct cbe_iic_pending_bits pending; + struct iic *iic; + + iic = &__get_cpu_var(iic); + *(unsigned long *) &pending = + in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + iic->eoi_stack[++iic->eoi_ptr] = pending.prio; + BUG_ON(iic->eoi_ptr > 15); + if (pending.flags & CBE_IIC_IRQ_VALID) + return irq_linear_revmap(iic->host, + iic_pending_to_hwnum(pending)); + return NO_IRQ; } #ifdef CONFIG_SMP @@ -269,12 +108,12 @@ static int setup_iic(void) /* Use the highest interrupt priorities for IPI */ static inline int iic_ipi_to_irq(int ipi) { - return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi; + return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi; } static inline int iic_irq_to_ipi(int irq) { - return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET); + return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0); } void iic_setup_cpu(void) @@ -293,22 +132,51 @@ u8 iic_get_target_id(int cpu) } EXPORT_SYMBOL_GPL(iic_get_target_id); +struct irq_host *iic_get_irq_host(int node) +{ + if (node < 0 || node >= IIC_NODE_COUNT) + return NULL; + return iic_hosts[node]; +} +EXPORT_SYMBOL_GPL(iic_get_irq_host); + + static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { - smp_message_recv(iic_irq_to_ipi(irq), regs); + int ipi = (int)(long)dev_id; + + smp_message_recv(ipi, regs); + return IRQ_HANDLED; } static void iic_request_ipi(int ipi, const char *name) { - int irq; - - irq = iic_ipi_to_irq(ipi); - /* IPIs are marked IRQF_DISABLED as they must run with irqs - * disabled */ - get_irq_desc(irq)->chip = &iic_pic; - get_irq_desc(irq)->status |= IRQ_PER_CPU; - request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL); + int node, virq; + + for (node = 0; node < IIC_NODE_COUNT; node++) { + char *rname; + if (iic_hosts[node] == NULL) + continue; + virq = irq_create_mapping(iic_hosts[node], + iic_ipi_to_irq(ipi)); + if (virq == NO_IRQ) { + printk(KERN_ERR + "iic: failed to map IPI %s on node %d\n", + name, node); + continue; + } + rname = kzalloc(strlen(name) + 16, GFP_KERNEL); + if (rname) + sprintf(rname, "%s node %d", name, node); + else + rname = (char *)name; + if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, + rname, (void *)(long)ipi)) + printk(KERN_ERR + "iic: failed to request IPI %s on node %d\n", + name, node); + } } void iic_request_IPIs(void) @@ -319,34 +187,119 @@ void iic_request_IPIs(void) iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); #endif /* CONFIG_DEBUGGER */ } + #endif /* CONFIG_SMP */ -static void iic_setup_spe_handlers(void) + +static int iic_host_match(struct irq_host *h, struct device_node *node) +{ + return h->host_data != NULL && node == h->host_data; +} + +static int iic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + if (hw < IIC_IRQ_IPI0) + set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq); + else + set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq); + return 0; +} + +static int iic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + +{ + /* Currently, we don't translate anything. That needs to be fixed as + * we get better defined device-trees. iic interrupts have to be + * explicitely mapped by whoever needs them + */ + return -ENODEV; +} + +static struct irq_host_ops iic_host_ops = { + .match = iic_host_match, + .map = iic_host_map, + .xlate = iic_host_xlate, +}; + +static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr, + struct irq_host *host) { - int be, isrc; + /* XXX FIXME: should locate the linux CPU number from the HW cpu + * number properly. We are lucky for now + */ + struct iic *iic = &per_cpu(iic, hw_cpu); + + iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs)); + BUG_ON(iic->regs == NULL); - /* Assume two threads per BE are present */ - for (be=0; be < num_present_cpus() / 2; be++) { - for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) { - int irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc; - get_irq_desc(irq)->chip = &iic_pic; + iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe); + iic->eoi_stack[0] = 0xff; + iic->host = host; + out_be64(&iic->regs->prio, 0); + + printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n", + hw_cpu, addr, iic->regs, iic->target_id); +} + +static int __init setup_iic(void) +{ + struct device_node *dn; + struct resource r0, r1; + struct irq_host *host; + int found = 0; + u32 *np; + + for (dn = NULL; + (dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) { + if (!device_is_compatible(dn, + "IBM,CBEA-Internal-Interrupt-Controller")) + continue; + np = (u32 *)get_property(dn, "ibm,interrupt-server-ranges", + NULL); + if (np == NULL) { + printk(KERN_WARNING "IIC: CPU association not found\n"); + of_node_put(dn); + return -ENODEV; + } + if (of_address_to_resource(dn, 0, &r0) || + of_address_to_resource(dn, 1, &r1)) { + printk(KERN_WARNING "IIC: Can't resolve addresses\n"); + of_node_put(dn); + return -ENODEV; } + host = NULL; + if (found < IIC_NODE_COUNT) { + host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + IIC_SOURCE_COUNT, + &iic_host_ops, + IIC_IRQ_INVALID); + iic_hosts[found] = host; + BUG_ON(iic_hosts[found] == NULL); + iic_hosts[found]->host_data = of_node_get(dn); + found++; + } + init_one_iic(np[0], r0.start, host); + init_one_iic(np[1], r1.start, host); } + + if (found) + return 0; + else + return -ENODEV; } -void iic_init_IRQ(void) +void __init iic_init_IRQ(void) { - int cpu, irq_offset; - struct iic *iic; - + /* Discover and initialize iics */ if (setup_iic() < 0) - setup_iic_hardcoded(); + panic("IIC: Failed to initialize !\n"); - irq_offset = 0; - for_each_possible_cpu(cpu) { - iic = &per_cpu(iic, cpu); - if (iic->regs) - out_be64(&iic->regs->prio, 0xff); - } - iic_setup_spe_handlers(); + /* Set master interrupt handling function */ + ppc_md.get_irq = iic_get_irq; + + /* Enable on current CPU */ + iic_setup_cpu(); } diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index 799f77d98f96..5560a92ec3ab 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -37,27 +37,24 @@ */ enum { - IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */ - IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */ - IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */ - IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */ - IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */ - IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ - IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */ + IIC_IRQ_INVALID = 0xff, + IIC_IRQ_MAX = 0x3f, + IIC_IRQ_EXT_IOIF0 = 0x20, + IIC_IRQ_EXT_IOIF1 = 0x2b, + IIC_IRQ_IPI0 = 0x40, + IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ + IIC_SOURCE_COUNT = 0x50, }; extern void iic_init_IRQ(void); -extern int iic_get_irq(struct pt_regs *regs); extern void iic_cause_IPI(int cpu, int mesg); extern void iic_request_IPIs(void); extern void iic_setup_cpu(void); -extern void iic_local_enable(void); -extern void iic_local_disable(void); extern u8 iic_get_target_id(int cpu); +extern struct irq_host *iic_get_irq_host(int node); extern void spider_init_IRQ(void); -extern int spider_get_irq(int node); #endif #endif /* ASM_CELL_PIC_H */ diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index d8c2a29b3c15..282987d6d4a2 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -49,6 +49,7 @@ #include <asm/irq.h> #include <asm/spu.h> #include <asm/spu_priv1.h> +#include <asm/udbg.h> #include "interrupt.h" #include "iommu.h" @@ -79,10 +80,22 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } +static void __init cell_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + +static void __init cell_init_irq(void) +{ + iic_init_IRQ(); + spider_init_IRQ(); +} + static void __init cell_setup_arch(void) { - ppc_md.init_IRQ = iic_init_IRQ; - ppc_md.get_irq = iic_get_irq; #ifdef CONFIG_SPU_BASE spu_priv1_ops = &spu_priv1_mmio_ops; #endif @@ -108,7 +121,6 @@ static void __init cell_setup_arch(void) /* Find and initialize PCI host bridges */ init_pci_config_tokens(); find_and_init_phbs(); - spider_init_IRQ(); cbe_pervasive_init(); #ifdef CONFIG_DUMMY_CONSOLE conswitchp = &dummy_con; @@ -126,8 +138,6 @@ static void __init cell_init_early(void) cell_init_iommu(); - ppc64_interrupt_controller = IC_CELL_PIC; - DBG(" <- cell_init_early()\n"); } @@ -173,6 +183,8 @@ define_machine(cell) { .calibrate_decr = generic_calibrate_decr, .check_legacy_ioport = cell_check_legacy_ioport, .progress = cell_progress, + .init_IRQ = cell_init_irq, + .pcibios_fixup = cell_pcibios_fixup, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 7c3a0b6d34fd..15217bb0402f 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/ioport.h> #include <asm/pgtable.h> #include <asm/prom.h> @@ -56,184 +57,323 @@ enum { REISWAITEN = 0x508, /* Reissue Wait Control*/ }; -static void __iomem *spider_pics[4]; +#define SPIDER_CHIP_COUNT 4 +#define SPIDER_SRC_COUNT 64 +#define SPIDER_IRQ_INVALID 63 -static void __iomem *spider_get_pic(int irq) -{ - int node = irq / IIC_NODE_STRIDE; - irq %= IIC_NODE_STRIDE; - - if (irq >= IIC_EXT_OFFSET && - irq < IIC_EXT_OFFSET + IIC_NUM_EXT && - spider_pics) - return spider_pics[node]; - return NULL; -} +struct spider_pic { + struct irq_host *host; + struct device_node *of_node; + void __iomem *regs; + unsigned int node_id; +}; +static struct spider_pic spider_pics[SPIDER_CHIP_COUNT]; -static int spider_get_nr(unsigned int irq) +static struct spider_pic *spider_virq_to_pic(unsigned int virq) { - return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET; + return irq_map[virq].host->host_data; } -static void __iomem *spider_get_irq_config(int irq) +static void __iomem *spider_get_irq_config(struct spider_pic *pic, + unsigned int src) { - void __iomem *pic; - pic = spider_get_pic(irq); - return pic + TIR_CFGA + 8 * spider_get_nr(irq); + return pic->regs + TIR_CFGA + 8 * src; } -static void spider_enable_irq(unsigned int irq) +static void spider_unmask_irq(unsigned int virq) { - int nodeid = (irq / IIC_NODE_STRIDE) * 0x10; - void __iomem *cfg = spider_get_irq_config(irq); - irq = spider_get_nr(irq); + struct spider_pic *pic = spider_virq_to_pic(virq); + void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq); - out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid); - out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); + out_be32(cfg, in_be32(cfg) | 0x30000000u); } -static void spider_disable_irq(unsigned int irq) +static void spider_mask_irq(unsigned int virq) { - void __iomem *cfg = spider_get_irq_config(irq); - irq = spider_get_nr(irq); + struct spider_pic *pic = spider_virq_to_pic(virq); + void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq); out_be32(cfg, in_be32(cfg) & ~0x30000000u); } -static unsigned int spider_startup_irq(unsigned int irq) +static void spider_ack_irq(unsigned int virq) { - spider_enable_irq(irq); - return 0; -} + struct spider_pic *pic = spider_virq_to_pic(virq); + unsigned int src = irq_map[virq].hwirq; -static void spider_shutdown_irq(unsigned int irq) -{ - spider_disable_irq(irq); -} + /* Reset edge detection logic if necessary + */ + if (get_irq_desc(virq)->status & IRQ_LEVEL) + return; -static void spider_end_irq(unsigned int irq) -{ - spider_enable_irq(irq); + /* Only interrupts 47 to 50 can be set to edge */ + if (src < 47 || src > 50) + return; + + /* Perform the clear of the edge logic */ + out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf)); } -static void spider_ack_irq(unsigned int irq) +static int spider_set_irq_type(unsigned int virq, unsigned int type) { - spider_disable_irq(irq); - iic_local_enable(); + unsigned int sense = type & IRQ_TYPE_SENSE_MASK; + struct spider_pic *pic = spider_virq_to_pic(virq); + unsigned int hw = irq_map[virq].hwirq; + void __iomem *cfg = spider_get_irq_config(pic, hw); + struct irq_desc *desc = get_irq_desc(virq); + u32 old_mask; + u32 ic; + + /* Note that only level high is supported for most interrupts */ + if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH && + (hw < 47 || hw > 50)) + return -EINVAL; + + /* Decode sense type */ + switch(sense) { + case IRQ_TYPE_EDGE_RISING: + ic = 0x3; + break; + case IRQ_TYPE_EDGE_FALLING: + ic = 0x2; + break; + case IRQ_TYPE_LEVEL_LOW: + ic = 0x0; + break; + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_NONE: + ic = 0x1; + break; + default: + return -EINVAL; + } + + /* Update irq_desc */ + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= type & IRQ_TYPE_SENSE_MASK; + if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + + /* Configure the source. One gross hack that was there before and + * that I've kept around is the priority to the BE which I set to + * be the same as the interrupt source number. I don't know wether + * that's supposed to make any kind of sense however, we'll have to + * decide that, but for now, I'm not changing the behaviour. + */ + old_mask = in_be32(cfg) & 0x30000000u; + out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) | + (pic->node_id << 4) | 0xe); + out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff)); + + return 0; } -static struct hw_interrupt_type spider_pic = { +static struct irq_chip spider_pic = { .typename = " SPIDER ", - .startup = spider_startup_irq, - .shutdown = spider_shutdown_irq, - .enable = spider_enable_irq, - .disable = spider_disable_irq, + .unmask = spider_unmask_irq, + .mask = spider_mask_irq, .ack = spider_ack_irq, - .end = spider_end_irq, + .set_type = spider_set_irq_type, }; -int spider_get_irq(int node) +static int spider_host_match(struct irq_host *h, struct device_node *node) +{ + struct spider_pic *pic = h->host_data; + return node == pic->of_node; +} + +static int spider_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) { - unsigned long cs; - void __iomem *regs = spider_pics[node]; + set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq); - cs = in_be32(regs + TIR_CS) >> 24; + /* Set default irq type */ + set_irq_type(virq, IRQ_TYPE_NONE); - if (cs == 63) - return -1; - else - return cs; + return 0; } -/* hardcoded part to be compatible with older firmware */ +static int spider_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) -void spider_init_IRQ_hardcoded(void) { - int node; - long spiderpic; - long pics[] = { 0x24000008000, 0x34000008000 }; - int n; - - pr_debug("%s(%d): Using hardcoded defaults\n", __FUNCTION__, __LINE__); - - for (node = 0; node < num_present_cpus()/2; node++) { - spiderpic = pics[node]; - printk(KERN_DEBUG "SPIDER addr: %lx\n", spiderpic); - spider_pics[node] = ioremap(spiderpic, 0x800); - for (n = 0; n < IIC_NUM_EXT; n++) { - int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; - get_irq_desc(irq)->chip = &spider_pic; - } - - /* do not mask any interrupts because of level */ - out_be32(spider_pics[node] + TIR_MSK, 0x0); - - /* disable edge detection clear */ - /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ - - /* enable interrupt packets to be output */ - out_be32(spider_pics[node] + TIR_PIEN, - in_be32(spider_pics[node] + TIR_PIEN) | 0x1); - - /* Enable the interrupt detection enable bit. Do this last! */ - out_be32(spider_pics[node] + TIR_DEN, - in_be32(spider_pics[node] + TIR_DEN) | 0x1); - } + /* Spider interrupts have 2 cells, first is the interrupt source, + * second, well, I don't know for sure yet ... We mask the top bits + * because old device-trees encode a node number in there + */ + *out_hwirq = intspec[0] & 0x3f; + *out_flags = IRQ_TYPE_LEVEL_HIGH; + return 0; } -void spider_init_IRQ(void) -{ - long spider_reg; - struct device_node *dn; - char *compatible; - int n, node = 0; - - for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { - compatible = (char *)get_property(dn, "compatible", NULL); - - if (!compatible) - continue; - - if (strstr(compatible, "CBEA,platform-spider-pic")) - spider_reg = *(long *)get_property(dn,"reg", NULL); - else if (strstr(compatible, "sti,platform-spider-pic")) { - spider_init_IRQ_hardcoded(); - return; - } else - continue; +static struct irq_host_ops spider_host_ops = { + .match = spider_host_match, + .map = spider_host_map, + .xlate = spider_host_xlate, +}; - if (!spider_reg) - printk("interrupt controller does not have reg property !\n"); +static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + struct spider_pic *pic = desc->handler_data; + unsigned int cs, virq; - n = prom_n_addr_cells(dn); + cs = in_be32(pic->regs + TIR_CS) >> 24; + if (cs == SPIDER_IRQ_INVALID) + virq = NO_IRQ; + else + virq = irq_linear_revmap(pic->host, cs); + if (virq != NO_IRQ) + generic_handle_irq(virq, regs); + desc->chip->eoi(irq); +} - if ( n != 2) - printk("reg property with invalid number of elements \n"); +/* For hooking up the cascace we have a problem. Our device-tree is + * crap and we don't know on which BE iic interrupt we are hooked on at + * least not the "standard" way. We can reconstitute it based on two + * informations though: which BE node we are connected to and wether + * we are connected to IOIF0 or IOIF1. Right now, we really only care + * about the IBM cell blade and we know that its firmware gives us an + * interrupt-map property which is pretty strange. + */ +static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) +{ + unsigned int virq; + u32 *imap, *tmp; + int imaplen, intsize, unit; + struct device_node *iic; + struct irq_host *iic_host; + +#if 0 /* Enable that when we have a way to retreive the node as well */ + /* First, we check wether we have a real "interrupts" in the device + * tree in case the device-tree is ever fixed + */ + struct of_irq oirq; + if (of_irq_map_one(pic->of_node, 0, &oirq) == 0) { + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + goto bail; + } +#endif + + /* Now do the horrible hacks */ + tmp = (u32 *)get_property(pic->of_node, "#interrupt-cells", NULL); + if (tmp == NULL) + return NO_IRQ; + intsize = *tmp; + imap = (u32 *)get_property(pic->of_node, "interrupt-map", &imaplen); + if (imap == NULL || imaplen < (intsize + 1)) + return NO_IRQ; + iic = of_find_node_by_phandle(imap[intsize]); + if (iic == NULL) + return NO_IRQ; + imap += intsize + 1; + tmp = (u32 *)get_property(iic, "#interrupt-cells", NULL); + if (tmp == NULL) + return NO_IRQ; + intsize = *tmp; + /* Assume unit is last entry of interrupt specifier */ + unit = imap[intsize - 1]; + /* Ok, we have a unit, now let's try to get the node */ + tmp = (u32 *)get_property(iic, "ibm,interrupt-server-ranges", NULL); + if (tmp == NULL) { + of_node_put(iic); + return NO_IRQ; + } + /* ugly as hell but works for now */ + pic->node_id = (*tmp) >> 1; + of_node_put(iic); + + /* Ok, now let's get cracking. You may ask me why I just didn't match + * the iic host from the iic OF node, but that way I'm still compatible + * with really really old old firmwares for which we don't have a node + */ + iic_host = iic_get_irq_host(pic->node_id); + if (iic_host == NULL) + return NO_IRQ; + /* Manufacture an IIC interrupt number of class 2 */ + virq = irq_create_mapping(iic_host, 0x20 | unit); + if (virq == NO_IRQ) + printk(KERN_ERR "spider_pic: failed to map cascade !"); + return virq; +} - spider_pics[node] = ioremap(spider_reg, 0x800); - printk("SPIDER addr: %lx with %i addr_cells mapped to %p\n", - spider_reg, n, spider_pics[node]); +static void __init spider_init_one(struct device_node *of_node, int chip, + unsigned long addr) +{ + struct spider_pic *pic = &spider_pics[chip]; + int i, virq; + + /* Map registers */ + pic->regs = ioremap(addr, 0x1000); + if (pic->regs == NULL) + panic("spider_pic: can't map registers !"); + + /* Allocate a host */ + pic->host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, SPIDER_SRC_COUNT, + &spider_host_ops, SPIDER_IRQ_INVALID); + if (pic->host == NULL) + panic("spider_pic: can't allocate irq host !"); + pic->host->host_data = pic; + + /* Fill out other bits */ + pic->of_node = of_node_get(of_node); + + /* Go through all sources and disable them */ + for (i = 0; i < SPIDER_SRC_COUNT; i++) { + void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i; + out_be32(cfg, in_be32(cfg) & ~0x30000000u); + } - for (n = 0; n < IIC_NUM_EXT; n++) { - int irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; - get_irq_desc(irq)->chip = &spider_pic; - } + /* do not mask any interrupts because of level */ + out_be32(pic->regs + TIR_MSK, 0x0); - /* do not mask any interrupts because of level */ - out_be32(spider_pics[node] + TIR_MSK, 0x0); + /* enable interrupt packets to be output */ + out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1); - /* disable edge detection clear */ - /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + /* Hook up the cascade interrupt to the iic and nodeid */ + virq = spider_find_cascade_and_node(pic); + if (virq == NO_IRQ) + return; + set_irq_data(virq, pic); + set_irq_chained_handler(virq, spider_irq_cascade); - /* enable interrupt packets to be output */ - out_be32(spider_pics[node] + TIR_PIEN, - in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %s\n", + pic->node_id, addr, of_node->full_name); - /* Enable the interrupt detection enable bit. Do this last! */ - out_be32(spider_pics[node] + TIR_DEN, - in_be32(spider_pics[node] + TIR_DEN) | 0x1); + /* Enable the interrupt detection enable bit. Do this last! */ + out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1); +} - node++; +void __init spider_init_IRQ(void) +{ + struct resource r; + struct device_node *dn; + int chip = 0; + + /* XXX node numbers are totally bogus. We _hope_ we get the device + * nodes in the right order here but that's definitely not guaranteed, + * we need to get the node from the device tree instead. + * There is currently no proper property for it (but our whole + * device-tree is bogus anyway) so all we can do is pray or maybe test + * the address and deduce the node-id + */ + for (dn = NULL; + (dn = of_find_node_by_name(dn, "interrupt-controller"));) { + if (device_is_compatible(dn, "CBEA,platform-spider-pic")) { + if (of_address_to_resource(dn, 0, &r)) { + printk(KERN_WARNING "spider-pic: Failed\n"); + continue; + } + } else if (device_is_compatible(dn, "sti,platform-spider-pic") + && (chip < 2)) { + static long hard_coded_pics[] = + { 0x24000008000, 0x34000008000 }; + r.start = hard_coded_pics[chip]; + } else + continue; + spider_init_one(dn, chip++, r.start); } } diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 656c1ef5f4ad..d06042deb021 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -264,51 +264,57 @@ spu_irq_class_2(int irq, void *data, struct pt_regs *regs) return stat ? IRQ_HANDLED : IRQ_NONE; } -static int -spu_request_irqs(struct spu *spu) +static int spu_request_irqs(struct spu *spu) { - int ret; - int irq_base; - - irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET; - - snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); - ret = request_irq(irq_base + spu->isrc, - spu_irq_class_0, IRQF_DISABLED, spu->irq_c0, spu); - if (ret) - goto out; - - snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); - ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_1, IRQF_DISABLED, spu->irq_c1, spu); - if (ret) - goto out1; + int ret = 0; - snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); - ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_2, IRQF_DISABLED, spu->irq_c2, spu); - if (ret) - goto out2; - goto out; + if (spu->irqs[0] != NO_IRQ) { + snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", + spu->number); + ret = request_irq(spu->irqs[0], spu_irq_class_0, + IRQF_DISABLED, + spu->irq_c0, spu); + if (ret) + goto bail0; + } + if (spu->irqs[1] != NO_IRQ) { + snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", + spu->number); + ret = request_irq(spu->irqs[1], spu_irq_class_1, + IRQF_DISABLED, + spu->irq_c1, spu); + if (ret) + goto bail1; + } + if (spu->irqs[2] != NO_IRQ) { + snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", + spu->number); + ret = request_irq(spu->irqs[2], spu_irq_class_2, + IRQF_DISABLED, + spu->irq_c2, spu); + if (ret) + goto bail2; + } + return 0; -out2: - free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu); -out1: - free_irq(irq_base + spu->isrc, spu); -out: +bail2: + if (spu->irqs[1] != NO_IRQ) + free_irq(spu->irqs[1], spu); +bail1: + if (spu->irqs[0] != NO_IRQ) + free_irq(spu->irqs[0], spu); +bail0: return ret; } -static void -spu_free_irqs(struct spu *spu) +static void spu_free_irqs(struct spu *spu) { - int irq_base; - - irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET; - - free_irq(irq_base + spu->isrc, spu); - free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu); - free_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, spu); + if (spu->irqs[0] != NO_IRQ) + free_irq(spu->irqs[0], spu); + if (spu->irqs[1] != NO_IRQ) + free_irq(spu->irqs[1], spu); + if (spu->irqs[2] != NO_IRQ) + free_irq(spu->irqs[2], spu); } static LIST_HEAD(spu_list); @@ -559,17 +565,38 @@ static void spu_unmap(struct spu *spu) iounmap((u8 __iomem *)spu->local_store); } +/* This function shall be abstracted for HV platforms */ +static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) +{ + struct irq_host *host; + unsigned int isrc; + u32 *tmp; + + host = iic_get_irq_host(spu->node); + if (host == NULL) + return -ENODEV; + + /* Get the interrupt source from the device-tree */ + tmp = (u32 *)get_property(np, "isrc", NULL); + if (!tmp) + return -ENODEV; + spu->isrc = isrc = tmp[0]; + + /* Now map interrupts of all 3 classes */ + spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc); + spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc); + spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc); + + /* Right now, we only fail if class 2 failed */ + return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; +} + static int __init spu_map_device(struct spu *spu, struct device_node *node) { char *prop; int ret; ret = -ENODEV; - prop = get_property(node, "isrc", NULL); - if (!prop) - goto out; - spu->isrc = *(unsigned int *)prop; - spu->name = get_property(node, "name", NULL); if (!spu->name) goto out; @@ -636,7 +663,8 @@ static int spu_create_sysdev(struct spu *spu) return ret; } - sysdev_create_file(&spu->sysdev, &attr_isrc); + if (spu->isrc != 0) + sysdev_create_file(&spu->sysdev, &attr_isrc); sysfs_add_device_to_node(&spu->sysdev, spu->nid); return 0; @@ -668,6 +696,9 @@ static int __init create_spu(struct device_node *spe) spu->nid = of_node_to_nid(spe); if (spu->nid == -1) spu->nid = 0; + ret = spu_map_interrupts(spu, spe); + if (ret) + goto out_unmap; spin_lock_init(&spu->register_lock); spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1)); spu_mfc_sr1_set(spu, 0x33); diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 66c253498803..6802cdc3168a 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -18,7 +18,6 @@ #include <asm/machdep.h> #include <asm/sections.h> #include <asm/pci-bridge.h> -#include <asm/open_pic.h> #include <asm/grackle.h> #include <asm/rtas.h> @@ -161,15 +160,9 @@ void __init chrp_pcibios_fixup(void) { struct pci_dev *dev = NULL; - struct device_node *np; - /* PCI interrupts are controlled by the OpenPIC */ - for_each_pci_dev(dev) { - np = pci_device_to_OF_node(dev); - if ((np != 0) && (np->n_intrs > 0) && (np->intrs[0].line != 0)) - dev->irq = np->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } + for_each_pci_dev(dev) + pci_read_irq_line(dev); } #define PRG_CL_RESET_VALID 0x00010000 diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 1f1771b212b4..9c08ff322290 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -24,7 +24,7 @@ #include <linux/reboot.h> #include <linux/init.h> #include <linux/pci.h> -#include <linux/version.h> +#include <linux/utsrelease.h> #include <linux/adb.h> #include <linux/module.h> #include <linux/delay.h> @@ -59,7 +59,7 @@ void rtas_indicator_progress(char *, unsigned short); int _chrp_type; EXPORT_SYMBOL(_chrp_type); -struct mpic *chrp_mpic; +static struct mpic *chrp_mpic; /* Used for doing CHRP event-scans */ DEFINE_PER_CPU(struct timer_list, heartbeat_timer); @@ -291,10 +291,6 @@ void __init chrp_setup_arch(void) pci_create_OF_bus_map(); -#ifdef CONFIG_SMP - smp_ops = &chrp_smp_ops; -#endif /* CONFIG_SMP */ - /* * Print the banner, then scroll down so boot progress * can be printed. -- Cort @@ -315,24 +311,32 @@ chrp_event_scan(unsigned long unused) jiffies + event_scan_interval); } +static void chrp_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) +{ + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); +} + /* * Finds the open-pic node and sets up the mpic driver. */ static void __init chrp_find_openpic(void) { struct device_node *np, *root; - int len, i, j, irq_count; + int len, i, j; int isu_size, idu_size; unsigned int *iranges, *opprop = NULL; int oplen = 0; unsigned long opaddr; int na = 1; - unsigned char init_senses[NR_IRQS - NUM_8259_INTERRUPTS]; - np = find_type_devices("open-pic"); + np = of_find_node_by_type(NULL, "open-pic"); if (np == NULL) return; - root = find_path_device("/"); + root = of_find_node_by_path("/"); if (root) { opprop = (unsigned int *) get_property (root, "platform-open-pic", &oplen); @@ -343,19 +347,15 @@ static void __init chrp_find_openpic(void) oplen /= na * sizeof(unsigned int); } else { struct resource r; - if (of_address_to_resource(np, 0, &r)) - return; + if (of_address_to_resource(np, 0, &r)) { + goto bail; + } opaddr = r.start; oplen = 0; } printk(KERN_INFO "OpenPIC at %lx\n", opaddr); - irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ - prom_get_irq_senses(init_senses, NUM_ISA_INTERRUPTS, NR_IRQS - 4); - /* i8259 cascade is always positive level */ - init_senses[0] = IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE; - iranges = (unsigned int *) get_property(np, "interrupt-ranges", &len); if (iranges == NULL) len = 0; /* non-distributed mpic */ @@ -382,15 +382,12 @@ static void __init chrp_find_openpic(void) if (len > 1) isu_size = iranges[3]; - chrp_mpic = mpic_alloc(opaddr, MPIC_PRIMARY, - isu_size, NUM_ISA_INTERRUPTS, irq_count, - NR_IRQS - 4, init_senses, irq_count, - " MPIC "); + chrp_mpic = mpic_alloc(np, opaddr, MPIC_PRIMARY, + isu_size, 0, " MPIC "); if (chrp_mpic == NULL) { printk(KERN_ERR "Failed to allocate MPIC structure\n"); - return; + goto bail; } - j = na - 1; for (i = 1; i < len; ++i) { iranges += 2; @@ -402,7 +399,10 @@ static void __init chrp_find_openpic(void) } mpic_init(chrp_mpic); - mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); + ppc_md.get_irq = mpic_get_irq; + bail: + of_node_put(root); + of_node_put(np); } #if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) @@ -413,14 +413,34 @@ static struct irqaction xmon_irqaction = { }; #endif -void __init chrp_init_IRQ(void) +static void __init chrp_find_8259(void) { - struct device_node *np; + struct device_node *np, *pic = NULL; unsigned long chrp_int_ack = 0; -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) - struct device_node *kbd; -#endif + unsigned int cascade_irq; + /* Look for cascade */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + pic = np; + break; + } + /* Ok, 8259 wasn't found. We need to handle the case where + * we have a pegasos that claims to be chrp but doesn't have + * a proper interrupt tree + */ + if (pic == NULL && chrp_mpic != NULL) { + printk(KERN_ERR "i8259: Not found in device-tree" + " assuming no legacy interrupts\n"); + return; + } + + /* Look for intack. In a perfect world, we would look for it on + * the ISA bus that holds the 8259 but heh... Works that way. If + * we ever see a problem, we can try to re-use the pSeries code here. + * Also, Pegasos-type platforms don't have a proper node to start + * from anyway + */ for (np = find_devices("pci"); np != NULL; np = np->next) { unsigned int *addrp = (unsigned int *) get_property(np, "8259-interrupt-acknowledge", NULL); @@ -431,11 +451,37 @@ void __init chrp_init_IRQ(void) break; } if (np == NULL) - printk(KERN_ERR "Cannot find PCI interrupt acknowledge address\n"); + printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" + " address, polling\n"); + + i8259_init(pic, chrp_int_ack); + if (ppc_md.get_irq == NULL) + ppc_md.get_irq = i8259_irq; + if (chrp_mpic != NULL) { + cascade_irq = irq_of_parse_and_map(pic, 0); + if (cascade_irq == NO_IRQ) + printk(KERN_ERR "i8259: failed to map cascade irq\n"); + else + set_irq_chained_handler(cascade_irq, + chrp_8259_cascade); + } +} +void __init chrp_init_IRQ(void) +{ +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) + struct device_node *kbd; +#endif chrp_find_openpic(); + chrp_find_8259(); - i8259_init(chrp_int_ack, 0); +#ifdef CONFIG_SMP + /* Pegasos has no MPIC, those ops would make it crash. It might be an + * option to move setting them to after we probe the PIC though + */ + if (chrp_mpic != NULL) + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; @@ -520,10 +566,6 @@ static int __init chrp_probe(void) DMA_MODE_READ = 0x44; DMA_MODE_WRITE = 0x48; isa_io_base = CHRP_ISA_IO_BASE; /* default value */ - ppc_do_canonicalize_irqs = 1; - - /* Assume we have an 8259... */ - __irq_offset_value = NUM_ISA_INTERRUPTS; return 1; } @@ -535,7 +577,6 @@ define_machine(chrp) { .init = chrp_init2, .show_cpuinfo = chrp_show_cpuinfo, .init_IRQ = chrp_init_IRQ, - .get_irq = mpic_get_irq, .pcibios_fixup = chrp_pcibios_fixup, .restart = rtas_restart, .power_off = rtas_power_off, diff --git a/arch/powerpc/platforms/chrp/smp.c b/arch/powerpc/platforms/chrp/smp.c index c298ca1ea680..1d2307e87c30 100644 --- a/arch/powerpc/platforms/chrp/smp.c +++ b/arch/powerpc/platforms/chrp/smp.c @@ -29,7 +29,6 @@ #include <asm/smp.h> #include <asm/residual.h> #include <asm/time.h> -#include <asm/open_pic.h> #include <asm/machdep.h> #include <asm/smp.h> #include <asm/mpic.h> diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index ba07a9a7c039..234a861870a8 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -80,6 +80,7 @@ config MPC7448HPC2 select DEFAULT_UIMAGE select PPC_UDBG_16550 select MPIC + select MPIC_WEIRD help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d7a4fc7ca238..5d393eb94935 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -1,7 +1,7 @@ /* * mpc7448_hpc2.c * - * Board setup routines for the Freescale Taiga platform + * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com @@ -12,10 +12,10 @@ * * Copyright 2004-2006 Freescale Semiconductor, Inc. * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ #include <linux/config.h> @@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void tsi108_pci_int_init(void); -extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); - -/* - * Define all of the IRQ senses and polarities. Taken from the - * mpc7448hpc manual. - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ - -static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { - /* External on-board sources */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ - /* Internal Tsi108/109 interrupt sources */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ -}; +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) { @@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; struct device_node *tsi_pic; tsi_pic = of_find_node_by_type(NULL, "open-pic"); @@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void) DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); - mpic = mpic_alloc(mpic_paddr, + mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | - MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), + MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, 0, /* num_sources used */ - TSI108_IRQ_BASE, 0, /* num_sources used */ - NR_IRQS - 4 /* XXXX */, - mpc7448_hpc2_pic_initsenses, - sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + "Tsi108_PIC"); BUG_ON(mpic == NULL); /* XXXX */ - mpic_init(mpic); - mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == 0) { + printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + tsi108_pci_int_init(); /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 0; } + define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index f70e820e7304..e32446877e78 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -162,27 +162,6 @@ static void pci_event_handler(struct HvLpEvent *event, struct pt_regs *regs) printk(KERN_ERR "pci_event_handler: NULL event received\n"); } -/* - * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c - * It must be called before the bus walk. - */ -void __init iSeries_init_IRQ(void) -{ - /* Register PCI event handler and open an event path */ - int ret; - - ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, - &pci_event_handler); - if (ret == 0) { - ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); - if (ret != 0) - printk(KERN_ERR "iseries_init_IRQ: open event path " - "failed with rc 0x%x\n", ret); - } else - printk(KERN_ERR "iseries_init_IRQ: register handler " - "failed with rc 0x%x\n", ret); -} - #define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff) #define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1) #define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1) @@ -196,7 +175,7 @@ static void iseries_enable_IRQ(unsigned int irq) { u32 bus, dev_id, function, mask; const u32 sub_bus = 0; - unsigned int rirq = virt_irq_to_real_map[irq]; + unsigned int rirq = (unsigned int)irq_map[irq].hwirq; /* The IRQ has already been locked by the caller */ bus = REAL_IRQ_TO_BUS(rirq); @@ -213,7 +192,7 @@ static unsigned int iseries_startup_IRQ(unsigned int irq) { u32 bus, dev_id, function, mask; const u32 sub_bus = 0; - unsigned int rirq = virt_irq_to_real_map[irq]; + unsigned int rirq = (unsigned int)irq_map[irq].hwirq; bus = REAL_IRQ_TO_BUS(rirq); function = REAL_IRQ_TO_FUNC(rirq); @@ -254,7 +233,7 @@ static void iseries_shutdown_IRQ(unsigned int irq) { u32 bus, dev_id, function, mask; const u32 sub_bus = 0; - unsigned int rirq = virt_irq_to_real_map[irq]; + unsigned int rirq = (unsigned int)irq_map[irq].hwirq; /* irq should be locked by the caller */ bus = REAL_IRQ_TO_BUS(rirq); @@ -277,7 +256,7 @@ static void iseries_disable_IRQ(unsigned int irq) { u32 bus, dev_id, function, mask; const u32 sub_bus = 0; - unsigned int rirq = virt_irq_to_real_map[irq]; + unsigned int rirq = (unsigned int)irq_map[irq].hwirq; /* The IRQ has already been locked by the caller */ bus = REAL_IRQ_TO_BUS(rirq); @@ -291,19 +270,19 @@ static void iseries_disable_IRQ(unsigned int irq) static void iseries_end_IRQ(unsigned int irq) { - unsigned int rirq = virt_irq_to_real_map[irq]; + unsigned int rirq = (unsigned int)irq_map[irq].hwirq; HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq), (REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq)); } -static hw_irq_controller iSeries_IRQ_handler = { - .typename = "iSeries irq controller", - .startup = iseries_startup_IRQ, - .shutdown = iseries_shutdown_IRQ, - .enable = iseries_enable_IRQ, - .disable = iseries_disable_IRQ, - .end = iseries_end_IRQ +static struct irq_chip iseries_pic = { + .typename = "iSeries irq controller", + .startup = iseries_startup_IRQ, + .shutdown = iseries_shutdown_IRQ, + .unmask = iseries_enable_IRQ, + .mask = iseries_disable_IRQ, + .eoi = iseries_end_IRQ }; /* @@ -314,17 +293,14 @@ static hw_irq_controller iSeries_IRQ_handler = { int __init iSeries_allocate_IRQ(HvBusNumber bus, HvSubBusNumber sub_bus, u32 bsubbus) { - int virtirq; unsigned int realirq; u8 idsel = ISERIES_GET_DEVICE_FROM_SUBBUS(bsubbus); u8 function = ISERIES_GET_FUNCTION_FROM_SUBBUS(bsubbus); realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3) + function; - virtirq = virt_irq_create_mapping(realirq); - irq_desc[virtirq].chip = &iSeries_IRQ_handler; - return virtirq; + return irq_create_mapping(NULL, realirq); } #endif /* CONFIG_PCI */ @@ -332,10 +308,9 @@ int __init iSeries_allocate_IRQ(HvBusNumber bus, /* * Get the next pending IRQ. */ -int iSeries_get_irq(struct pt_regs *regs) +unsigned int iSeries_get_irq(struct pt_regs *regs) { - /* -2 means ignore this interrupt */ - int irq = -2; + int irq = NO_IRQ_IGNORE; #ifdef CONFIG_SMP if (get_lppaca()->int_dword.fields.ipi_cnt) { @@ -358,9 +333,57 @@ int iSeries_get_irq(struct pt_regs *regs) } spin_unlock(&pending_irqs_lock); if (irq >= NR_IRQS) - irq = -2; + irq = NO_IRQ_IGNORE; } #endif return irq; } + +static int iseries_irq_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + set_irq_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq); + + return 0; +} + +static struct irq_host_ops iseries_irq_host_ops = { + .map = iseries_irq_host_map, +}; + +/* + * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c + * It must be called before the bus walk. + */ +void __init iSeries_init_IRQ(void) +{ + /* Register PCI event handler and open an event path */ + struct irq_host *host; + int ret; + + /* + * The Hypervisor only allows us up to 256 interrupt + * sources (the irq number is passed in a u8). + */ + irq_set_virq_count(256); + + /* Create irq host. No need for a revmap since HV will give us + * back our virtual irq number + */ + host = irq_alloc_host(IRQ_HOST_MAP_NOMAP, 0, &iseries_irq_host_ops, 0); + BUG_ON(host == NULL); + irq_set_default_host(host); + + ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, + &pci_event_handler); + if (ret == 0) { + ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); + if (ret != 0) + printk(KERN_ERR "iseries_init_IRQ: open event path " + "failed with rc 0x%x\n", ret); + } else + printk(KERN_ERR "iseries_init_IRQ: register handler " + "failed with rc 0x%x\n", ret); +} + diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h index 188aa808abd7..1ee8985140e5 100644 --- a/arch/powerpc/platforms/iseries/irq.h +++ b/arch/powerpc/platforms/iseries/irq.h @@ -4,6 +4,6 @@ extern void iSeries_init_IRQ(void); extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32); extern void iSeries_activate_IRQs(void); -extern int iSeries_get_irq(struct pt_regs *); +extern unsigned int iSeries_get_irq(struct pt_regs *); #endif /* _ISERIES_IRQ_H */ diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index c877074745b2..c9605d773a77 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -294,8 +294,6 @@ static void __init iSeries_init_early(void) { DBG(" -> iSeries_init_early()\n"); - ppc64_interrupt_controller = IC_ISERIES; - #if defined(CONFIG_BLK_DEV_INITRD) /* * If the init RAM disk has been configured and there is @@ -659,12 +657,6 @@ static int __init iseries_probe(void) powerpc_firmware_features |= FW_FEATURE_ISERIES; powerpc_firmware_features |= FW_FEATURE_LPAR; - /* - * The Hypervisor only allows us up to 256 interrupt - * sources (the irq number is passed in a u8). - */ - virt_irq_max = 255; - hpte_init_iSeries(); return 1; diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index f7170ff86dab..63a1670d3bfd 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -443,18 +443,23 @@ void __init maple_pci_init(void) int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel) { struct device_node *np; - int irq = channel ? 15 : 14; + unsigned int defirq = channel ? 15 : 14; + unsigned int irq; if (pdev->vendor != PCI_VENDOR_ID_AMD || pdev->device != PCI_DEVICE_ID_AMD_8111_IDE) - return irq; + return defirq; np = pci_device_to_OF_node(pdev); if (np == NULL) - return irq; - if (np->n_intrs < 2) - return irq; - return np->intrs[channel & 0x1].line; + return defirq; + irq = irq_of_parse_and_map(np, channel & 0x1); + if (irq == NO_IRQ) { + printk("Failed to map onboard IDE interrupt for channel %d\n", + channel); + return defirq; + } + return irq; } /* XXX: To remove once all firmwares are ok */ diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 5cf90c28b141..57567dfb9819 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -11,7 +11,7 @@ * */ -#define DEBUG +#undef DEBUG #include <linux/init.h> #include <linux/errno.h> @@ -198,50 +198,90 @@ static void __init maple_init_early(void) { DBG(" -> maple_init_early\n"); - /* Setup interrupt mapping options */ - ppc64_interrupt_controller = IC_OPEN_PIC; - iommu_init_early_dart(); DBG(" <- maple_init_early\n"); } - -static __init void maple_init_IRQ(void) +/* + * This is almost identical to pSeries and CHRP. We need to make that + * code generic at one point, with appropriate bits in the device-tree to + * identify the presence of an HT APIC + */ +static void __init maple_init_IRQ(void) { - struct device_node *root; + struct device_node *root, *np, *mpic_node = NULL; unsigned int *opprop; - unsigned long opic_addr; + unsigned long openpic_addr = 0; + int naddr, n, i, opplen, has_isus = 0; struct mpic *mpic; - unsigned char senses[128]; - int n; + unsigned int flags = MPIC_PRIMARY; + + /* Locate MPIC in the device-tree. Note that there is a bug + * in Maple device-tree where the type of the controller is + * open-pic and not interrupt-controller + */ - DBG(" -> maple_init_IRQ\n"); + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "open-pic")) { + mpic_node = np; + break; + } + if (mpic_node == NULL) + for_each_node_by_type(np, "open-pic") { + mpic_node = np; + break; + } + if (mpic_node == NULL) { + printk(KERN_ERR + "Failed to locate the MPIC interrupt controller\n"); + return; + } - /* XXX: Non standard, replace that with a proper openpic/mpic node - * in the device-tree. Find the Open PIC if present */ + /* Find address list in /platform-open-pic */ root = of_find_node_by_path("/"); - opprop = (unsigned int *) get_property(root, - "platform-open-pic", NULL); - if (opprop == 0) - panic("OpenPIC not found !\n"); - - n = prom_n_addr_cells(root); - for (opic_addr = 0; n > 0; --n) - opic_addr = (opic_addr << 32) + *opprop++; + naddr = prom_n_addr_cells(root); + opprop = (unsigned int *) get_property(root, "platform-open-pic", + &opplen); + if (opprop != 0) { + openpic_addr = of_read_number(opprop, naddr); + has_isus = (opplen > naddr); + printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n", + openpic_addr, has_isus); + } of_node_put(root); - /* Obtain sense values from device-tree */ - prom_get_irq_senses(senses, 0, 128); + BUG_ON(openpic_addr == 0); - mpic = mpic_alloc(opic_addr, - MPIC_PRIMARY | MPIC_BIG_ENDIAN | - MPIC_BROKEN_U3 | MPIC_WANTS_RESET, - 0, 0, 128, 128, senses, 128, "U3-MPIC"); + /* Check for a big endian MPIC */ + if (get_property(np, "big-endian", NULL) != NULL) + flags |= MPIC_BIG_ENDIAN; + + /* XXX Maple specific bits */ + flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET; + /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ + flags |= MPIC_BIG_ENDIAN; + + /* Setup the openpic driver. More device-tree junks, we hard code no + * ISUs for now. I'll have to revisit some stuffs with the folks doing + * the firmware for those + */ + mpic = mpic_alloc(mpic_node, openpic_addr, flags, + /*has_isus ? 16 :*/ 0, 0, " MPIC "); BUG_ON(mpic == NULL); - mpic_init(mpic); - DBG(" <- maple_init_IRQ\n"); + /* Add ISUs */ + opplen /= sizeof(u32); + for (n = 0, i = naddr; i < opplen; i += naddr, n++) { + unsigned long isuaddr = of_read_number(opprop + i, naddr); + mpic_assign_isu(mpic, n, isuaddr); + } + + /* All ISUs are setup, complete initialization */ + mpic_init(mpic); + ppc_md.get_irq = mpic_get_irq; + of_node_put(mpic_node); + of_node_put(root); } static void __init maple_progress(char *s, unsigned short hex) @@ -256,7 +296,9 @@ static void __init maple_progress(char *s, unsigned short hex) static int __init maple_probe(void) { unsigned long root = of_get_flat_dt_root(); - if (!of_flat_dt_is_compatible(root, "Momentum,Maple")) + + if (!of_flat_dt_is_compatible(root, "Momentum,Maple") && + !of_flat_dt_is_compatible(root, "Momentum,Apache")) return 0; /* * On U3, the DART (iommu) must be allocated now since it @@ -277,7 +319,6 @@ define_machine(maple_md) { .setup_arch = maple_setup_arch, .init_early = maple_init_early, .init_IRQ = maple_init_IRQ, - .get_irq = mpic_get_irq, .pcibios_fixup = maple_pcibios_fixup, .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq, .restart = maple_restart, diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index 69f65e215a5c..d66415491055 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -10,11 +10,33 @@ #include <linux/kernel.h> #include <linux/fb.h> #include <linux/backlight.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <asm/atomic.h> #include <asm/prom.h> #include <asm/backlight.h> #define OLD_BACKLIGHT_MAX 15 +static void pmac_backlight_key_worker(void *data); +static void pmac_backlight_set_legacy_worker(void *data); + +static DECLARE_WORK(pmac_backlight_key_work, pmac_backlight_key_worker, NULL); +static DECLARE_WORK(pmac_backlight_set_legacy_work, pmac_backlight_set_legacy_worker, NULL); + +/* Although these variables are used in interrupt context, it makes no sense to + * protect them. No user is able to produce enough key events per second and + * notice the errors that might happen. + */ +static int pmac_backlight_key_queued; +static int pmac_backlight_set_legacy_queued; + +/* The via-pmu code allows the backlight to be grabbed, in which case the + * in-kernel control of the brightness needs to be disabled. This should + * only be used by really old PowerBooks. + */ +static atomic_t kernel_backlight_disabled = ATOMIC_INIT(0); + /* Protect the pmac_backlight variable */ DEFINE_MUTEX(pmac_backlight_mutex); @@ -71,8 +93,11 @@ int pmac_backlight_curve_lookup(struct fb_info *info, int value) return level; } -static void pmac_backlight_key(int direction) +static void pmac_backlight_key_worker(void *data) { + if (atomic_read(&kernel_backlight_disabled)) + return; + mutex_lock(&pmac_backlight_mutex); if (pmac_backlight) { struct backlight_properties *props; @@ -82,7 +107,8 @@ static void pmac_backlight_key(int direction) props = pmac_backlight->props; brightness = props->brightness + - ((direction?-1:1) * (props->max_brightness / 15)); + ((pmac_backlight_key_queued?-1:1) * + (props->max_brightness / 15)); if (brightness < 0) brightness = 0; @@ -97,17 +123,20 @@ static void pmac_backlight_key(int direction) mutex_unlock(&pmac_backlight_mutex); } -void pmac_backlight_key_up() +/* This function is called in interrupt context */ +void pmac_backlight_key(int direction) { - pmac_backlight_key(0); + if (atomic_read(&kernel_backlight_disabled)) + return; + + /* we can receive multiple interrupts here, but the scheduled work + * will run only once, with the last value + */ + pmac_backlight_key_queued = direction; + schedule_work(&pmac_backlight_key_work); } -void pmac_backlight_key_down() -{ - pmac_backlight_key(1); -} - -int pmac_backlight_set_legacy_brightness(int brightness) +static int __pmac_backlight_set_legacy_brightness(int brightness) { int error = -ENXIO; @@ -136,6 +165,28 @@ int pmac_backlight_set_legacy_brightness(int brightness) return error; } +static void pmac_backlight_set_legacy_worker(void *data) +{ + if (atomic_read(&kernel_backlight_disabled)) + return; + + __pmac_backlight_set_legacy_brightness(pmac_backlight_set_legacy_queued); +} + +/* This function is called in interrupt context */ +void pmac_backlight_set_legacy_brightness_pmu(int brightness) { + if (atomic_read(&kernel_backlight_disabled)) + return; + + pmac_backlight_set_legacy_queued = brightness; + schedule_work(&pmac_backlight_set_legacy_work); +} + +int pmac_backlight_set_legacy_brightness(int brightness) +{ + return __pmac_backlight_set_legacy_brightness(brightness); +} + int pmac_backlight_get_legacy_brightness() { int result = -ENXIO; @@ -157,3 +208,17 @@ int pmac_backlight_get_legacy_brightness() return result; } + +void pmac_backlight_disable() +{ + atomic_inc(&kernel_backlight_disabled); +} + +void pmac_backlight_enable() +{ + atomic_dec(&kernel_backlight_disabled); +} + +EXPORT_SYMBOL_GPL(pmac_backlight); +EXPORT_SYMBOL_GPL(pmac_backlight_mutex); +EXPORT_SYMBOL_GPL(pmac_has_backlight_type); diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index cb257aeb91f6..9d73d0234c5d 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -12,7 +12,7 @@ #include <linux/kernel.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/version.h> +#include <linux/utsrelease.h> #include <asm/sections.h> #include <asm/prom.h> #include <asm/page.h> @@ -162,6 +162,8 @@ static void __init bootx_add_chosen_props(unsigned long base, { u32 val; + bootx_dt_add_prop("linux,bootx", NULL, 0, mem_end); + if (bootx_info->kernelParamsOffset) { char *args = (char *)((unsigned long)bootx_info) + bootx_info->kernelParamsOffset; @@ -179,10 +181,32 @@ static void __init bootx_add_chosen_props(unsigned long base, } static void __init bootx_add_display_props(unsigned long base, - unsigned long *mem_end) + unsigned long *mem_end, + int has_real_node) { - bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); - bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); + boot_infos_t *bi = bootx_info; + u32 tmp; + + if (has_real_node) { + bootx_dt_add_prop("linux,boot-display", NULL, 0, mem_end); + bootx_dt_add_prop("linux,opened", NULL, 0, mem_end); + } else + bootx_dt_add_prop("linux,bootx-noscreen", NULL, 0, mem_end); + + tmp = bi->dispDeviceDepth; + bootx_dt_add_prop("linux,bootx-depth", &tmp, 4, mem_end); + tmp = bi->dispDeviceRect[2] - bi->dispDeviceRect[0]; + bootx_dt_add_prop("linux,bootx-width", &tmp, 4, mem_end); + tmp = bi->dispDeviceRect[3] - bi->dispDeviceRect[1]; + bootx_dt_add_prop("linux,bootx-height", &tmp, 4, mem_end); + tmp = bi->dispDeviceRowBytes; + bootx_dt_add_prop("linux,bootx-linebytes", &tmp, 4, mem_end); + tmp = (u32)bi->dispDeviceBase; + if (tmp == 0) + tmp = (u32)bi->logicalDisplayBase; + tmp += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes; + tmp += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8); + bootx_dt_add_prop("linux,bootx-addr", &tmp, 4, mem_end); } static void __init bootx_dt_add_string(char *s, unsigned long *mem_end) @@ -211,7 +235,7 @@ static void __init bootx_scan_dt_build_strings(unsigned long base, if (!strcmp(namep, "/chosen")) { DBG(" detected /chosen ! adding properties names !\n"); - bootx_dt_add_string("linux,platform", mem_end); + bootx_dt_add_string("linux,bootx", mem_end); bootx_dt_add_string("linux,stdout-path", mem_end); bootx_dt_add_string("linux,initrd-start", mem_end); bootx_dt_add_string("linux,initrd-end", mem_end); @@ -305,10 +329,13 @@ static void __init bootx_scan_dt_build_struct(unsigned long base, ppp = &pp->next; } - if (node == bootx_node_chosen) + if (node == bootx_node_chosen) { bootx_add_chosen_props(base, mem_end); - if (node == bootx_info->dispDeviceRegEntryOffset) - bootx_add_display_props(base, mem_end); + if (bootx_info->dispDeviceRegEntryOffset == 0) + bootx_add_display_props(base, mem_end, 0); + } + else if (node == bootx_info->dispDeviceRegEntryOffset) + bootx_add_display_props(base, mem_end, 1); /* do all our children */ cpp = &np->child; @@ -350,6 +377,14 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) mem_end += 4; bootx_dt_strend = mem_end; bootx_scan_dt_build_strings(base, 4, &mem_end); + /* Add some strings */ + bootx_dt_add_string("linux,bootx-noscreen", &mem_end); + bootx_dt_add_string("linux,bootx-depth", &mem_end); + bootx_dt_add_string("linux,bootx-width", &mem_end); + bootx_dt_add_string("linux,bootx-height", &mem_end); + bootx_dt_add_string("linux,bootx-linebytes", &mem_end); + bootx_dt_add_string("linux,bootx-addr", &mem_end); + /* Wrap up strings */ hdr->off_dt_strings = bootx_dt_strbase - mem_start; hdr->dt_strings_size = bootx_dt_strend - bootx_dt_strbase; @@ -376,8 +411,15 @@ static unsigned long __init bootx_flatten_dt(unsigned long start) DBG("End of boot params: %x\n", mem_end); rsvmap[0] = mem_start; rsvmap[1] = mem_end; - rsvmap[2] = 0; - rsvmap[3] = 0; + if (bootx_info->ramDisk) { + rsvmap[2] = ((unsigned long)bootx_info) + bootx_info->ramDisk; + rsvmap[3] = rsvmap[2] + bootx_info->ramDiskSize; + rsvmap[4] = 0; + rsvmap[5] = 0; + } else { + rsvmap[2] = 0; + rsvmap[3] = 0; + } return (unsigned long)hdr; } @@ -443,7 +485,15 @@ void __init bootx_init(unsigned long r3, unsigned long r4) if (!BOOT_INFO_IS_V2_COMPATIBLE(bi)) bi->logicalDisplayBase = bi->dispDeviceBase; + /* Fixup depth 16 -> 15 as that's what MacOS calls 16bpp */ + if (bi->dispDeviceDepth == 16) + bi->dispDeviceDepth = 15; + + #ifdef CONFIG_BOOTX_TEXT + ptr = (unsigned long)bi->logicalDisplayBase; + ptr += bi->dispDeviceRect[1] * bi->dispDeviceRowBytes; + ptr += bi->dispDeviceRect[0] * ((bi->dispDeviceDepth + 7) / 8); btext_setup_display(bi->dispDeviceRect[2] - bi->dispDeviceRect[0], bi->dispDeviceRect[3] - bi->dispDeviceRect[1], bi->dispDeviceDepth, bi->dispDeviceRowBytes, @@ -477,6 +527,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) #ifdef CONFIG_BOOTX_TEXT btext_welcome(bi); #endif + /* New BootX enters kernel with MMU off, i/os are not allowed * here. This hack will have been done by the boostrap anyway. */ @@ -499,12 +550,12 @@ void __init bootx_init(unsigned long r3, unsigned long r4) */ if (bi->version < 5) { space = bi->deviceTreeOffset + bi->deviceTreeSize; - if (bi->ramDisk) + if (bi->ramDisk >= space) space = bi->ramDisk + bi->ramDiskSize; } else space = bi->totalParamsSize; - bootx_printf("Total space used by parameters & ramdisk: %x \n", space); + bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space); /* New BootX will have flushed all TLBs and enters kernel with * MMU switched OFF, so this should not be useful anymore. diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index f08a14516139..7b1156ea5341 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -10,6 +10,8 @@ * that is iMac G5 and latest single CPU desktop. */ +#undef DEBUG + #include <linux/module.h> #include <linux/types.h> #include <linux/errno.h> @@ -30,13 +32,7 @@ #include <asm/smu.h> #include <asm/pmac_pfunc.h> -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG(fmt...) -#endif +#define DBG(fmt...) pr_debug(fmt) /* see 970FX user manual */ @@ -82,8 +78,6 @@ static struct freq_attr* g5_cpu_freqs_attr[] = { /* Power mode data is an array of the 32 bits PCR values to use for * the various frequencies, retrieved from the device-tree */ -static u32 *g5_pmode_data; -static int g5_pmode_max; static int g5_pmode_cur; static void (*g5_switch_volt)(int speed_mode); @@ -93,6 +87,11 @@ static int (*g5_query_freq)(void); static DEFINE_MUTEX(g5_switch_mutex); +#ifdef CONFIG_PMAC_SMU + +static u32 *g5_pmode_data; +static int g5_pmode_max; + static struct smu_sdbp_fvt *g5_fvt_table; /* table of op. points */ static int g5_fvt_count; /* number of op. points */ static int g5_fvt_cur; /* current op. point */ @@ -210,6 +209,16 @@ static int g5_scom_query_freq(void) } /* + * Fake voltage switching for platforms with missing support + */ + +static void g5_dummy_switch_volt(int speed_mode) +{ +} + +#endif /* CONFIG_PMAC_SMU */ + +/* * Platform function based voltage switching for PowerMac7,2 & 7,3 */ @@ -248,6 +257,9 @@ static int g5_pfunc_switch_freq(int speed_mode) struct pmf_args args; u32 done = 0; unsigned long timeout; + int rc; + + DBG("g5_pfunc_switch_freq(%d)\n", speed_mode); /* If frequency is going up, first ramp up the voltage */ if (speed_mode < g5_pmode_cur) @@ -255,9 +267,12 @@ static int g5_pfunc_switch_freq(int speed_mode) /* Do it */ if (speed_mode == CPUFREQ_HIGH) - pmf_call_one(pfunc_cpu_setfreq_high, NULL); + rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL); else - pmf_call_one(pfunc_cpu_setfreq_low, NULL); + rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL); + + if (rc) + printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc); /* It's an irq GPIO so we should be able to just block here, * I'll do that later after I've properly tested the IRQ code for @@ -296,13 +311,6 @@ static int g5_pfunc_query_freq(void) return val ? CPUFREQ_HIGH : CPUFREQ_LOW; } -/* - * Fake voltage switching for platforms with missing support - */ - -static void g5_dummy_switch_volt(int speed_mode) -{ -} /* * Common interface to the cpufreq core @@ -375,6 +383,8 @@ static struct cpufreq_driver g5_cpufreq_driver = { }; +#ifdef CONFIG_PMAC_SMU + static int __init g5_neo2_cpufreq_init(struct device_node *cpus) { struct device_node *cpunode; @@ -525,6 +535,9 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) return rc; } +#endif /* CONFIG_PMAC_SMU */ + + static int __init g5_pm72_cpufreq_init(struct device_node *cpus) { struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL; @@ -533,6 +546,9 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) u64 max_freq, min_freq, ih, il; int has_volt = 1, rc = 0; + DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and" + " RackMac3,1...\n"); + /* Get first CPU node */ for (cpunode = NULL; (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { @@ -636,6 +652,15 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) */ ih = *((u32 *)(eeprom + 0x10)); il = *((u32 *)(eeprom + 0x20)); + + /* Check for machines with no useful settings */ + if (il == ih) { + printk(KERN_WARNING "cpufreq: No low frequency mode available" + " on this model !\n"); + rc = -ENODEV; + goto bail; + } + min_freq = 0; if (ih != 0 && il != 0) min_freq = (max_freq * il) / ih; @@ -643,7 +668,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) /* Sanity check */ if (min_freq >= max_freq || min_freq < 1000) { printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n"); - rc = -ENODEV; + rc = -ENXIO; goto bail; } g5_cpu_freqs[0].frequency = max_freq; @@ -690,16 +715,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) return rc; } -static int __init g5_rm31_cpufreq_init(struct device_node *cpus) -{ - /* NYI */ - return 0; -} - static int __init g5_cpufreq_init(void) { struct device_node *cpus; - int rc; + int rc = 0; cpus = of_find_node_by_path("/cpus"); if (cpus == NULL) { @@ -708,12 +727,13 @@ static int __init g5_cpufreq_init(void) } if (machine_is_compatible("PowerMac7,2") || - machine_is_compatible("PowerMac7,3")) + machine_is_compatible("PowerMac7,3") || + machine_is_compatible("RackMac3,1")) rc = g5_pm72_cpufreq_init(cpus); - else if (machine_is_compatible("RackMac3,1")) - rc = g5_rm31_cpufreq_init(cpus); +#ifdef CONFIG_PMAC_SMU else rc = g5_neo2_cpufreq_init(cpus); +#endif /* CONFIG_PMAC_SMU */ of_node_put(cpus); return rc; diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index ceafaf52a668..8677f50c2586 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -522,10 +522,11 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) host->speed = KW_I2C_MODE_25KHZ; break; } - if (np->n_intrs > 0) - host->irq = np->intrs[0].line; - else - host->irq = NO_IRQ; + host->irq = irq_of_parse_and_map(np, 0); + if (host->irq == NO_IRQ) + printk(KERN_WARNING + "low_i2c: Failed to map interrupt for %s\n", + np->full_name); host->base = ioremap((*addrp), 0x1000); if (host->base == NULL) { diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 41fa2409482a..6a36ea9bf673 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -29,6 +29,8 @@ #include <asm/machdep.h> #include <asm/nvram.h> +#include "pmac.h" + #define DEBUG #ifdef DEBUG @@ -80,9 +82,6 @@ static int nvram_partitions[3]; // XXX Turn that into a sem static DEFINE_SPINLOCK(nv_lock); -extern int pmac_newworld; -extern int system_running; - static int (*core99_write_bank)(int bank, u8* datas); static int (*core99_erase_bank)(int bank); diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index d524a915aa86..205d04471161 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -16,6 +16,7 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/bootmem.h> +#include <linux/irq.h> #include <asm/sections.h> #include <asm/io.h> @@ -24,10 +25,7 @@ #include <asm/machdep.h> #include <asm/pmac_feature.h> #include <asm/grackle.h> -#ifdef CONFIG_PPC64 -//#include <asm/iommu.h> #include <asm/ppc-pci.h> -#endif #undef DEBUG @@ -46,6 +44,8 @@ static int has_uninorth; static struct pci_controller *u3_agp; static struct pci_controller *u4_pcie; static struct pci_controller *u3_ht; +#else +static int has_second_ohare; #endif /* CONFIG_PPC64 */ extern u8 pci_cache_line_size; @@ -647,6 +647,33 @@ static void __init init_p2pbridge(void) early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); } +static void __init init_second_ohare(void) +{ + struct device_node *np = of_find_node_by_name(NULL, "pci106b,7"); + unsigned char bus, devfn; + unsigned short cmd; + + if (np == NULL) + return; + + /* This must run before we initialize the PICs since the second + * ohare hosts a PIC that will be accessed there. + */ + if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { + struct pci_controller* hose = + pci_find_hose_for_OF_device(np); + if (!hose) { + printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); + return; + } + early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; + cmd &= ~PCI_COMMAND_IO; + early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); + } + has_second_ohare = 1; +} + /* * Some Apple desktop machines have a NEC PD720100A USB2 controller * on the motherboard. Open Firmware, on these, will disable the @@ -688,9 +715,6 @@ static void __init fixup_nec_usb2(void) " EHCI, fixing up...\n"); data &= ~1UL; early_write_config_dword(hose, bus, devfn, 0xe4, data); - early_write_config_byte(hose, bus, - devfn | 2, PCI_INTERRUPT_LINE, - nec->intrs[0].line); } } } @@ -958,30 +982,30 @@ static int __init add_bridge(struct device_node *dev) return 0; } -static void __init pcibios_fixup_OF_interrupts(void) +void __init pmac_pcibios_fixup(void) { struct pci_dev* dev = NULL; - /* - * Open Firmware often doesn't initialize the - * PCI_INTERRUPT_LINE config register properly, so we - * should find the device node and apply the interrupt - * obtained from the OF device-tree - */ for_each_pci_dev(dev) { - struct device_node *node; - node = pci_device_to_OF_node(dev); - /* this is the node, see if it has interrupts */ - if (node && node->n_intrs > 0) - dev->irq = node->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } -} + /* Read interrupt from the device-tree */ + pci_read_irq_line(dev); -void __init pmac_pcibios_fixup(void) -{ - /* Fixup interrupts according to OF tree */ - pcibios_fixup_OF_interrupts(); +#ifdef CONFIG_PPC32 + /* Fixup interrupt for the modem/ethernet combo controller. + * on machines with a second ohare chip. + * The number in the device tree (27) is bogus (correct for + * the ethernet-only board but not the combo ethernet/modem + * board). The real interrupt is 28 on the second controller + * -> 28+32 = 60. + */ + if (has_second_ohare && + dev->vendor == PCI_VENDOR_ID_DEC && + dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS) { + dev->irq = irq_create_mapping(NULL, 60); + set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); + } +#endif /* CONFIG_PPC32 */ + } } #ifdef CONFIG_PPC64 @@ -1071,6 +1095,7 @@ void __init pmac_pci_init(void) #else /* CONFIG_PPC64 */ init_p2pbridge(); + init_second_ohare(); fixup_nec_usb2(); /* We are still having some issues with the Xserve G4, enabling diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c index d6eab8b3f7de..aacfa59595d1 100644 --- a/arch/powerpc/platforms/powermac/pfunc_base.c +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -24,19 +24,18 @@ static irqreturn_t macio_gpio_irq(int irq, void *data, struct pt_regs *regs) static int macio_do_gpio_irq_enable(struct pmf_function *func) { - if (func->node->n_intrs < 1) + unsigned int irq = irq_of_parse_and_map(func->node, 0); + if (irq == NO_IRQ) return -EINVAL; - - return request_irq(func->node->intrs[0].line, macio_gpio_irq, 0, - func->node->name, func); + return request_irq(irq, macio_gpio_irq, 0, func->node->name, func); } static int macio_do_gpio_irq_disable(struct pmf_function *func) { - if (func->node->n_intrs < 1) + unsigned int irq = irq_of_parse_and_map(func->node, 0); + if (irq == NO_IRQ) return -EINVAL; - - free_irq(func->node->intrs[0].line, func); + free_irq(irq, func); return 0; } @@ -257,7 +256,7 @@ static struct pmf_handlers macio_mmio_handlers = { .write_reg32 = macio_do_write_reg32, .read_reg32 = macio_do_read_reg32, .write_reg8 = macio_do_write_reg8, - .read_reg32 = macio_do_read_reg8, + .read_reg8 = macio_do_read_reg8, .read_reg32_msrx = macio_do_read_reg32_msrx, .read_reg8_msrx = macio_do_read_reg8_msrx, .write_reg32_slm = macio_do_write_reg32_slm, diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index c9b09a9e6050..39f7ddb554ea 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -65,39 +65,36 @@ static u32 level_mask[4]; static DEFINE_SPINLOCK(pmac_pic_lock); -#define GATWICK_IRQ_POOL_SIZE 10 -static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; - #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; +static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static int pmac_irq_cascade = -1; +static struct irq_host *pmac_pic_host; -/* - * Mark an irq as "lost". This is only used on the pmac - * since it can lose interrupts (see pmac_set_irq_mask). - * -- Cort - */ -void __set_lost(unsigned long irq_nr, int nokick) +static void __pmac_retrigger(unsigned int irq_nr) { - if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { + if (irq_nr >= max_real_irqs && pmac_irq_cascade > 0) { + __set_bit(irq_nr, ppc_lost_interrupts); + irq_nr = pmac_irq_cascade; + mb(); + } + if (!__test_and_set_bit(irq_nr, ppc_lost_interrupts)) { atomic_inc(&ppc_n_lost_interrupts); - if (!nokick) - set_dec(1); + set_dec(1); } } -static void pmac_mask_and_ack_irq(unsigned int irq_nr) +static void pmac_mask_and_ack_irq(unsigned int virq) { - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; + unsigned int src = irq_map[virq].hwirq; + unsigned long bit = 1UL << (src & 0x1f); + int i = src >> 5; unsigned long flags; - if ((unsigned)irq_nr >= max_irqs) - return; - - clear_bit(irq_nr, ppc_cached_irq_mask); - if (test_and_clear_bit(irq_nr, ppc_lost_interrupts)) - atomic_dec(&ppc_n_lost_interrupts); spin_lock_irqsave(&pmac_pic_lock, flags); + __clear_bit(src, ppc_cached_irq_mask); + if (__test_and_clear_bit(src, ppc_lost_interrupts)) + atomic_dec(&ppc_n_lost_interrupts); out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); out_le32(&pmac_irq_hw[i]->ack, bit); do { @@ -109,16 +106,29 @@ static void pmac_mask_and_ack_irq(unsigned int irq_nr) spin_unlock_irqrestore(&pmac_pic_lock, flags); } -static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) +static void pmac_ack_irq(unsigned int virq) +{ + unsigned int src = irq_map[virq].hwirq; + unsigned long bit = 1UL << (src & 0x1f); + int i = src >> 5; + unsigned long flags; + + spin_lock_irqsave(&pmac_pic_lock, flags); + if (__test_and_clear_bit(src, ppc_lost_interrupts)) + atomic_dec(&ppc_n_lost_interrupts); + out_le32(&pmac_irq_hw[i]->ack, bit); + (void)in_le32(&pmac_irq_hw[i]->ack); + spin_unlock_irqrestore(&pmac_pic_lock, flags); +} + +static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) { unsigned long bit = 1UL << (irq_nr & 0x1f); int i = irq_nr >> 5; - unsigned long flags; if ((unsigned)irq_nr >= max_irqs) return; - spin_lock_irqsave(&pmac_pic_lock, flags); /* enable unmasked interrupts */ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); @@ -135,71 +145,78 @@ static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) * the bit in the flag register or request another interrupt. */ if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) - __set_lost((ulong)irq_nr, nokicklost); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + __pmac_retrigger(irq_nr); } /* When an irq gets requested for the first client, if it's an * edge interrupt, we clear any previous one on the controller */ -static unsigned int pmac_startup_irq(unsigned int irq_nr) +static unsigned int pmac_startup_irq(unsigned int virq) { - unsigned long bit = 1UL << (irq_nr & 0x1f); - int i = irq_nr >> 5; + unsigned long flags; + unsigned int src = irq_map[virq].hwirq; + unsigned long bit = 1UL << (src & 0x1f); + int i = src >> 5; - if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0) + spin_lock_irqsave(&pmac_pic_lock, flags); + if ((irq_desc[virq].status & IRQ_LEVEL) == 0) out_le32(&pmac_irq_hw[i]->ack, bit); - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); + __set_bit(src, ppc_cached_irq_mask); + __pmac_set_irq_mask(src, 0); + spin_unlock_irqrestore(&pmac_pic_lock, flags); return 0; } -static void pmac_mask_irq(unsigned int irq_nr) +static void pmac_mask_irq(unsigned int virq) { - clear_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); - mb(); + unsigned long flags; + unsigned int src = irq_map[virq].hwirq; + + spin_lock_irqsave(&pmac_pic_lock, flags); + __clear_bit(src, ppc_cached_irq_mask); + __pmac_set_irq_mask(src, 1); + spin_unlock_irqrestore(&pmac_pic_lock, flags); } -static void pmac_unmask_irq(unsigned int irq_nr) +static void pmac_unmask_irq(unsigned int virq) { - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 0); + unsigned long flags; + unsigned int src = irq_map[virq].hwirq; + + spin_lock_irqsave(&pmac_pic_lock, flags); + __set_bit(src, ppc_cached_irq_mask); + __pmac_set_irq_mask(src, 0); + spin_unlock_irqrestore(&pmac_pic_lock, flags); } -static void pmac_end_irq(unsigned int irq_nr) +static int pmac_retrigger(unsigned int virq) { - if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) - && irq_desc[irq_nr].action) { - set_bit(irq_nr, ppc_cached_irq_mask); - pmac_set_irq_mask(irq_nr, 1); - } -} + unsigned long flags; + spin_lock_irqsave(&pmac_pic_lock, flags); + __pmac_retrigger(irq_map[virq].hwirq); + spin_unlock_irqrestore(&pmac_pic_lock, flags); + return 1; +} -struct hw_interrupt_type pmac_pic = { +static struct irq_chip pmac_pic = { .typename = " PMAC-PIC ", .startup = pmac_startup_irq, - .enable = pmac_unmask_irq, - .disable = pmac_mask_irq, - .ack = pmac_mask_and_ack_irq, - .end = pmac_end_irq, -}; - -struct hw_interrupt_type gatwick_pic = { - .typename = " GATWICK ", - .startup = pmac_startup_irq, - .enable = pmac_unmask_irq, - .disable = pmac_mask_irq, - .ack = pmac_mask_and_ack_irq, - .end = pmac_end_irq, + .mask = pmac_mask_irq, + .ack = pmac_ack_irq, + .mask_ack = pmac_mask_and_ack_irq, + .unmask = pmac_unmask_irq, + .retrigger = pmac_retrigger, }; static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) { + unsigned long flags; int irq, bits; + int rc = IRQ_NONE; + spin_lock_irqsave(&pmac_pic_lock, flags); for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; @@ -209,17 +226,20 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) if (bits == 0) continue; irq += __ilog2(bits); + spin_unlock_irqrestore(&pmac_pic_lock, flags); __do_IRQ(irq, regs); - return IRQ_HANDLED; + spin_lock_irqsave(&pmac_pic_lock, flags); + rc = IRQ_HANDLED; } - printk("gatwick irq not from gatwick pic\n"); - return IRQ_NONE; + spin_unlock_irqrestore(&pmac_pic_lock, flags); + return rc; } -static int pmac_get_irq(struct pt_regs *regs) +static unsigned int pmac_pic_get_irq(struct pt_regs *regs) { int irq; unsigned long bits = 0; + unsigned long flags; #ifdef CONFIG_SMP void psurge_smp_message_recv(struct pt_regs *); @@ -227,9 +247,10 @@ static int pmac_get_irq(struct pt_regs *regs) /* IPI's are a hack on the powersurge -- Cort */ if ( smp_processor_id() != 0 ) { psurge_smp_message_recv(regs); - return -2; /* ignore, already handled */ + return NO_IRQ_IGNORE; /* ignore, already handled */ } #endif /* CONFIG_SMP */ + spin_lock_irqsave(&pmac_pic_lock, flags); for (irq = max_real_irqs; (irq -= 32) >= 0; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; @@ -241,133 +262,10 @@ static int pmac_get_irq(struct pt_regs *regs) irq += __ilog2(bits); break; } - - return irq; -} - -/* This routine will fix some missing interrupt values in the device tree - * on the gatwick mac-io controller used by some PowerBooks - * - * Walking of OF nodes could use a bit more fixing up here, but it's not - * very important as this is all boot time code on static portions of the - * device-tree. - * - * However, the modifications done to "intrs" will have to be removed and - * replaced with proper updates of the "interrupts" properties or - * AAPL,interrupts, yet to be decided, once the dynamic parsing is there. - */ -static void __init pmac_fix_gatwick_interrupts(struct device_node *gw, - int irq_base) -{ - struct device_node *node; - int count; - - memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); - count = 0; - for (node = NULL; (node = of_get_next_child(gw, node)) != NULL;) { - /* Fix SCC */ - if ((strcasecmp(node->name, "escc") == 0) && node->child) { - if (node->child->n_intrs < 3) { - node->child->intrs = &gatwick_int_pool[count]; - count += 3; - } - node->child->n_intrs = 3; - node->child->intrs[0].line = 15+irq_base; - node->child->intrs[1].line = 4+irq_base; - node->child->intrs[2].line = 5+irq_base; - printk(KERN_INFO "irq: fixed SCC on gatwick" - " (%d,%d,%d)\n", - node->child->intrs[0].line, - node->child->intrs[1].line, - node->child->intrs[2].line); - } - /* Fix media-bay & left SWIM */ - if (strcasecmp(node->name, "media-bay") == 0) { - struct device_node* ya_node; - - if (node->n_intrs == 0) - node->intrs = &gatwick_int_pool[count++]; - node->n_intrs = 1; - node->intrs[0].line = 29+irq_base; - printk(KERN_INFO "irq: fixed media-bay on gatwick" - " (%d)\n", node->intrs[0].line); - - ya_node = node->child; - while(ya_node) { - if (strcasecmp(ya_node->name, "floppy") == 0) { - if (ya_node->n_intrs < 2) { - ya_node->intrs = &gatwick_int_pool[count]; - count += 2; - } - ya_node->n_intrs = 2; - ya_node->intrs[0].line = 19+irq_base; - ya_node->intrs[1].line = 1+irq_base; - printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n", - ya_node->intrs[0].line, ya_node->intrs[1].line); - } - if (strcasecmp(ya_node->name, "ata4") == 0) { - if (ya_node->n_intrs < 2) { - ya_node->intrs = &gatwick_int_pool[count]; - count += 2; - } - ya_node->n_intrs = 2; - ya_node->intrs[0].line = 14+irq_base; - ya_node->intrs[1].line = 3+irq_base; - printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n", - ya_node->intrs[0].line, ya_node->intrs[1].line); - } - ya_node = ya_node->sibling; - } - } - } - if (count > 10) { - printk("WARNING !! Gatwick interrupt pool overflow\n"); - printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE); - printk(" requested = %d\n", count); - } -} - -/* - * The PowerBook 3400/2400/3500 can have a combo ethernet/modem - * card which includes an ohare chip that acts as a second interrupt - * controller. If we find this second ohare, set it up and fix the - * interrupt value in the device tree for the ethernet chip. - */ -static void __init enable_second_ohare(struct device_node *np) -{ - unsigned char bus, devfn; - unsigned short cmd; - struct device_node *ether; - - /* This code doesn't strictly belong here, it could be part of - * either the PCI initialisation or the feature code. It's kept - * here for historical reasons. - */ - if (pci_device_from_OF_node(np, &bus, &devfn) == 0) { - struct pci_controller* hose = - pci_find_hose_for_OF_device(np); - if (!hose) { - printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); - return; - } - early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); - cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - cmd &= ~PCI_COMMAND_IO; - early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); - } - - /* Fix interrupt for the modem/ethernet combo controller. The number - * in the device tree (27) is bogus (correct for the ethernet-only - * board but not the combo ethernet/modem board). - * The real interrupt is 28 on the second controller -> 28+32 = 60. - */ - ether = of_find_node_by_name(NULL, "pci1011,14"); - if (ether && ether->n_intrs > 0) { - ether->intrs[0].line = 60; - printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", - ether->intrs[0].line); - } - of_node_put(ether); + spin_unlock_irqrestore(&pmac_pic_lock, flags); + if (unlikely(irq < 0)) + return NO_IRQ; + return irq_linear_revmap(pmac_pic_host, irq); } #ifdef CONFIG_XMON @@ -386,17 +284,61 @@ static struct irqaction gatwick_cascade_action = { .name = "cascade", }; +static int pmac_pic_host_match(struct irq_host *h, struct device_node *node) +{ + /* We match all, we don't always have a node anyway */ + return 1; +} + +static int pmac_pic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct irq_desc *desc = get_irq_desc(virq); + int level; + + if (hw >= max_irqs) + return -EINVAL; + + /* Mark level interrupts, set delayed disable for edge ones and set + * handlers + */ + level = !!(level_mask[hw >> 5] & (1UL << (hw & 0x1f))); + if (level) + desc->status |= IRQ_LEVEL; + else + desc->status |= IRQ_DELAYED_DISABLE; + set_irq_chip_and_handler(virq, &pmac_pic, level ? + handle_level_irq : handle_edge_irq); + return 0; +} + +static int pmac_pic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_flags) + +{ + *out_flags = IRQ_TYPE_NONE; + *out_hwirq = *intspec; + return 0; +} + +static struct irq_host_ops pmac_pic_host_ops = { + .match = pmac_pic_host_match, + .map = pmac_pic_host_map, + .xlate = pmac_pic_host_xlate, +}; + static void __init pmac_pic_probe_oldstyle(void) { int i; - int irq_cascade = -1; struct device_node *master = NULL; struct device_node *slave = NULL; u8 __iomem *addr; struct resource r; /* Set our get_irq function */ - ppc_md.get_irq = pmac_get_irq; + ppc_md.get_irq = pmac_pic_get_irq; /* * Find the interrupt controller type & node @@ -414,7 +356,6 @@ static void __init pmac_pic_probe_oldstyle(void) if (slave) { max_irqs = 64; level_mask[1] = OHARE_LEVEL_MASK; - enable_second_ohare(slave); } } else if ((master = of_find_node_by_name(NULL, "mac-io")) != NULL) { max_irqs = max_real_irqs = 64; @@ -438,14 +379,18 @@ static void __init pmac_pic_probe_oldstyle(void) max_irqs = 128; level_mask[2] = HEATHROW_LEVEL_MASK; level_mask[3] = 0; - pmac_fix_gatwick_interrupts(slave, max_real_irqs); } } BUG_ON(master == NULL); - /* Set the handler for the main PIC */ - for ( i = 0; i < max_real_irqs ; i++ ) - irq_desc[i].chip = &pmac_pic; + /* + * Allocate an irq host + */ + pmac_pic_host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, max_irqs, + &pmac_pic_host_ops, + max_irqs); + BUG_ON(pmac_pic_host == NULL); + irq_set_default_host(pmac_pic_host); /* Get addresses of first controller if we have a node for it */ BUG_ON(of_address_to_resource(master, 0, &r)); @@ -472,39 +417,38 @@ static void __init pmac_pic_probe_oldstyle(void) pmac_irq_hw[i++] = (volatile struct pmac_irq_hw __iomem *) (addr + 0x10); - irq_cascade = slave->intrs[0].line; + pmac_irq_cascade = irq_of_parse_and_map(slave, 0); printk(KERN_INFO "irq: Found slave Apple PIC %s for %d irqs" " cascade: %d\n", slave->full_name, - max_irqs - max_real_irqs, irq_cascade); + max_irqs - max_real_irqs, pmac_irq_cascade); } of_node_put(slave); - /* disable all interrupts in all controllers */ + /* Disable all interrupts in all controllers */ for (i = 0; i * 32 < max_irqs; ++i) out_le32(&pmac_irq_hw[i]->enable, 0); - /* mark level interrupts */ - for (i = 0; i < max_irqs; i++) - if (level_mask[i >> 5] & (1UL << (i & 0x1f))) - irq_desc[i].status = IRQ_LEVEL; + /* Hookup cascade irq */ + if (slave && pmac_irq_cascade != NO_IRQ) + setup_irq(pmac_irq_cascade, &gatwick_cascade_action); - /* Setup handlers for secondary controller and hook cascade irq*/ - if (slave) { - for ( i = max_real_irqs ; i < max_irqs ; i++ ) - irq_desc[i].chip = &gatwick_pic; - setup_irq(irq_cascade, &gatwick_cascade_action); - } printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs); #ifdef CONFIG_XMON - setup_irq(20, &xmon_action); + setup_irq(irq_create_mapping(NULL, 20), &xmon_action); #endif } #endif /* CONFIG_PPC32 */ -static int pmac_u3_cascade(struct pt_regs *regs, void *data) +static void pmac_u3_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - return mpic_get_one_irq((struct mpic *)data, regs); + struct mpic *mpic = desc->handler_data; + + unsigned int cascade_irq = mpic_get_one_irq(mpic, regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) @@ -514,21 +458,20 @@ static void __init pmac_pic_setup_mpic_nmi(struct mpic *mpic) int nmi_irq; pswitch = of_find_node_by_name(NULL, "programmer-switch"); - if (pswitch && pswitch->n_intrs) { - nmi_irq = pswitch->intrs[0].line; - mpic_irq_set_priority(nmi_irq, 9); - setup_irq(nmi_irq, &xmon_action); + if (pswitch) { + nmi_irq = irq_of_parse_and_map(pswitch, 0); + if (nmi_irq != NO_IRQ) { + mpic_irq_set_priority(nmi_irq, 9); + setup_irq(nmi_irq, &xmon_action); + } + of_node_put(pswitch); } - of_node_put(pswitch); #endif /* defined(CONFIG_XMON) && defined(CONFIG_PPC32) */ } static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, int master) { - unsigned char senses[128]; - int offset = master ? 0 : 128; - int count = master ? 128 : 124; const char *name = master ? " MPIC 1 " : " MPIC 2 "; struct resource r; struct mpic *mpic; @@ -541,8 +484,6 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); - prom_get_irq_senses(senses, offset, offset + count); - flags |= MPIC_WANTS_RESET; if (get_property(np, "big-endian", NULL)) flags |= MPIC_BIG_ENDIAN; @@ -553,8 +494,7 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, if (master && (flags & MPIC_BIG_ENDIAN)) flags |= MPIC_BROKEN_U3; - mpic = mpic_alloc(r.start, flags, 0, offset, count, master ? 252 : 0, - senses, count, name); + mpic = mpic_alloc(np, r.start, flags, 0, 0, name); if (mpic == NULL) return NULL; @@ -567,6 +507,7 @@ static int __init pmac_pic_probe_mpic(void) { struct mpic *mpic1, *mpic2; struct device_node *np, *master = NULL, *slave = NULL; + unsigned int cascade; /* We can have up to 2 MPICs cascaded */ for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) @@ -603,16 +544,24 @@ static int __init pmac_pic_probe_mpic(void) of_node_put(master); /* No slave, let's go out */ - if (slave == NULL || slave->n_intrs < 1) + if (slave == NULL) return 0; + /* Get/Map slave interrupt */ + cascade = irq_of_parse_and_map(slave, 0); + if (cascade == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade IRQ\n"); + return 0; + } + mpic2 = pmac_setup_one_mpic(slave, 0); if (mpic2 == NULL) { printk(KERN_ERR "Failed to setup slave MPIC\n"); of_node_put(slave); return 0; } - mpic_setup_cascade(slave->intrs[0].line, pmac_u3_cascade, mpic2); + set_irq_data(cascade, mpic2); + set_irq_chained_handler(cascade, pmac_u3_cascade); of_node_put(slave); return 0; @@ -621,6 +570,20 @@ static int __init pmac_pic_probe_mpic(void) void __init pmac_pic_init(void) { + unsigned int flags = 0; + + /* We configure the OF parsing based on our oldworld vs. newworld + * platform type and wether we were booted by BootX. + */ +#ifdef CONFIG_PPC32 + if (!pmac_newworld) + flags |= OF_IMAP_OLDWORLD_MAC; + if (get_property(of_chosen, "linux,bootx", NULL) != NULL) + flags |= OF_IMAP_NO_PHANDLE; +#endif /* CONFIG_PPC_32 */ + + of_irq_map_init(flags); + /* We first try to detect Apple's new Core99 chipset, since mac-io * is quite different on those machines and contains an IBM MPIC2. */ @@ -643,6 +606,7 @@ unsigned long sleep_save_mask[2]; /* This used to be passed by the PMU driver but that link got * broken with the new driver model. We use this tweak for now... + * We really want to do things differently though... */ static int pmacpic_find_viaint(void) { @@ -656,7 +620,7 @@ static int pmacpic_find_viaint(void) np = of_find_node_by_name(NULL, "via-pmu"); if (np == NULL) goto not_found; - viaint = np->intrs[0].line; + viaint = irq_of_parse_and_map(np, 0);; #endif /* CONFIG_ADB_PMU */ not_found: diff --git a/arch/powerpc/platforms/powermac/pmac.h b/arch/powerpc/platforms/powermac/pmac.h index 21c7b0f8f329..94e7b24b840b 100644 --- a/arch/powerpc/platforms/powermac/pmac.h +++ b/arch/powerpc/platforms/powermac/pmac.h @@ -12,6 +12,8 @@ struct rtc_time; +extern int pmac_newworld; + extern long pmac_time_init(void); extern unsigned long pmac_get_boot_time(void); extern void pmac_get_rtc_time(struct rtc_time *); diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 8654b5f07836..31a9da769fa2 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -613,9 +613,6 @@ static void __init pmac_init_early(void) udbg_adb_init(!!strstr(cmd_line, "btextdbg")); #ifdef CONFIG_PPC64 - /* Setup interrupt mapping options */ - ppc64_interrupt_controller = IC_OPEN_PIC; - iommu_init_early_dart(); #endif } diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index 9639c66b453d..c7ffde1a614e 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -72,32 +72,61 @@ static irqreturn_t ras_error_interrupt(int irq, void *dev_id, /* #define DEBUG */ -static void request_ras_irqs(struct device_node *np, char *propname, + +static void request_ras_irqs(struct device_node *np, irqreturn_t (*handler)(int, void *, struct pt_regs *), const char *name) { - unsigned int *ireg, len, i; - int virq, n_intr; - - ireg = (unsigned int *)get_property(np, propname, &len); - if (ireg == NULL) - return; - n_intr = prom_n_intr_cells(np); - len /= n_intr * sizeof(*ireg); - - for (i = 0; i < len; i++) { - virq = virt_irq_create_mapping(*ireg); - if (virq == NO_IRQ) { - printk(KERN_ERR "Unable to allocate interrupt " - "number for %s\n", np->full_name); - return; + int i, index, count = 0; + struct of_irq oirq; + u32 *opicprop; + unsigned int opicplen; + unsigned int virqs[16]; + + /* Check for obsolete "open-pic-interrupt" property. If present, then + * map those interrupts using the default interrupt host and default + * trigger + */ + opicprop = (u32 *)get_property(np, "open-pic-interrupt", &opicplen); + if (opicprop) { + opicplen /= sizeof(u32); + for (i = 0; i < opicplen; i++) { + if (count > 15) + break; + virqs[count] = irq_create_mapping(NULL, *(opicprop++)); + if (virqs[count] == NO_IRQ) + printk(KERN_ERR "Unable to allocate interrupt " + "number for %s\n", np->full_name); + else + count++; + } - if (request_irq(irq_offset_up(virq), handler, 0, name, NULL)) { + } + /* Else use normal interrupt tree parsing */ + else { + /* First try to do a proper OF tree parsing */ + for (index = 0; of_irq_map_one(np, index, &oirq) == 0; + index++) { + if (count > 15) + break; + virqs[count] = irq_create_of_mapping(oirq.controller, + oirq.specifier, + oirq.size); + if (virqs[count] == NO_IRQ) + printk(KERN_ERR "Unable to allocate interrupt " + "number for %s\n", np->full_name); + else + count++; + } + } + + /* Now request them */ + for (i = 0; i < count; i++) { + if (request_irq(virqs[i], handler, 0, name, NULL)) { printk(KERN_ERR "Unable to request interrupt %d for " - "%s\n", irq_offset_up(virq), np->full_name); + "%s\n", virqs[i], np->full_name); return; } - ireg += n_intr; } } @@ -115,20 +144,14 @@ static int __init init_ras_IRQ(void) /* Internal Errors */ np = of_find_node_by_path("/event-sources/internal-errors"); if (np != NULL) { - request_ras_irqs(np, "open-pic-interrupt", ras_error_interrupt, - "RAS_ERROR"); - request_ras_irqs(np, "interrupts", ras_error_interrupt, - "RAS_ERROR"); + request_ras_irqs(np, ras_error_interrupt, "RAS_ERROR"); of_node_put(np); } /* EPOW Events */ np = of_find_node_by_path("/event-sources/epow-events"); if (np != NULL) { - request_ras_irqs(np, "open-pic-interrupt", ras_epow_interrupt, - "RAS_EPOW"); - request_ras_irqs(np, "interrupts", ras_epow_interrupt, - "RAS_EPOW"); + request_ras_irqs(np, ras_epow_interrupt, "RAS_EPOW"); of_node_put(np); } @@ -162,7 +185,7 @@ ras_epow_interrupt(int irq, void *dev_id, struct pt_regs * regs) status = rtas_call(ras_check_exception_token, 6, 1, NULL, RAS_VECTOR_OFFSET, - virt_irq_to_real(irq_offset_down(irq)), + irq_map[irq].hwirq, RTAS_EPOW_WARNING | RTAS_POWERMGM_EVENTS, critical, __pa(&ras_log_buf), rtas_get_error_log_max()); @@ -198,7 +221,7 @@ ras_error_interrupt(int irq, void *dev_id, struct pt_regs * regs) status = rtas_call(ras_check_exception_token, 6, 1, NULL, RAS_VECTOR_OFFSET, - virt_irq_to_real(irq_offset_down(irq)), + irq_map[irq].hwirq, RTAS_INTERNAL_ERROR, 1 /*Time Critical */, __pa(&ras_log_buf), rtas_get_error_log_max()); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 999509d28af8..31867a701fcb 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -76,6 +76,9 @@ #define DBG(fmt...) #endif +/* move those away to a .h */ +extern void smp_init_pseries_mpic(void); +extern void smp_init_pseries_xics(void); extern void find_udbg_vterm(void); int fwnmi_active; /* TRUE if an FWNMI handler is present */ @@ -83,7 +86,7 @@ int fwnmi_active; /* TRUE if an FWNMI handler is present */ static void pseries_shared_idle_sleep(void); static void pseries_dedicated_idle_sleep(void); -struct mpic *pSeries_mpic; +static struct device_node *pSeries_mpic_node; static void pSeries_show_cpuinfo(struct seq_file *m) { @@ -118,71 +121,98 @@ static void __init fwnmi_init(void) fwnmi_active = 1; } -static void __init pSeries_init_mpic(void) +void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - unsigned int *addrp; - struct device_node *np; - unsigned long intack = 0; - - /* All ISUs are setup, complete initialization */ - mpic_init(pSeries_mpic); - - /* Check what kind of cascade ACK we have */ - if (!(np = of_find_node_by_name(NULL, "pci")) - || !(addrp = (unsigned int *) - get_property(np, "8259-interrupt-acknowledge", NULL))) - printk(KERN_ERR "Cannot find pci to get ack address\n"); - else - intack = addrp[prom_n_addr_cells(np)-1]; - of_node_put(np); - - /* Setup the legacy interrupts & controller */ - i8259_init(intack, 0); - - /* Hook cascade to mpic */ - mpic_setup_cascade(NUM_ISA_INTERRUPTS, i8259_irq_cascade, NULL); + unsigned int cascade_irq = i8259_irq(regs); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } -static void __init pSeries_setup_mpic(void) +static void __init pseries_mpic_init_IRQ(void) { + struct device_node *np, *old, *cascade = NULL; + unsigned int *addrp; + unsigned long intack = 0; unsigned int *opprop; unsigned long openpic_addr = 0; - unsigned char senses[NR_IRQS - NUM_ISA_INTERRUPTS]; - struct device_node *root; - int irq_count; + unsigned int cascade_irq; + int naddr, n, i, opplen; + struct mpic *mpic; - /* Find the Open PIC if present */ - root = of_find_node_by_path("/"); - opprop = (unsigned int *) get_property(root, "platform-open-pic", NULL); + np = of_find_node_by_path("/"); + naddr = prom_n_addr_cells(np); + opprop = (unsigned int *) get_property(np, "platform-open-pic", &opplen); if (opprop != 0) { - int n = prom_n_addr_cells(root); - - for (openpic_addr = 0; n > 0; --n) - openpic_addr = (openpic_addr << 32) + *opprop++; + openpic_addr = of_read_number(opprop, naddr); printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); } - of_node_put(root); + of_node_put(np); BUG_ON(openpic_addr == 0); - /* Get the sense values from OF */ - prom_get_irq_senses(senses, NUM_ISA_INTERRUPTS, NR_IRQS); - /* Setup the openpic driver */ - irq_count = NR_IRQS - NUM_ISA_INTERRUPTS - 4; /* leave room for IPIs */ - pSeries_mpic = mpic_alloc(openpic_addr, MPIC_PRIMARY, - 16, 16, irq_count, /* isu size, irq offset, irq count */ - NR_IRQS - 4, /* ipi offset */ - senses, irq_count, /* sense & sense size */ - " MPIC "); + mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, + MPIC_PRIMARY, + 16, 250, /* isu size, irq count */ + " MPIC "); + BUG_ON(mpic == NULL); + + /* Add ISUs */ + opplen /= sizeof(u32); + for (n = 0, i = naddr; i < opplen; i += naddr, n++) { + unsigned long isuaddr = of_read_number(opprop + i, naddr); + mpic_assign_isu(mpic, n, isuaddr); + } + + /* All ISUs are setup, complete initialization */ + mpic_init(mpic); + + /* Look for cascade */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade = np; + break; + } + if (cascade == NULL) + return; + + cascade_irq = irq_of_parse_and_map(cascade, 0); + if (cascade == NO_IRQ) { + printk(KERN_ERR "xics: failed to map cascade interrupt"); + return; + } + + /* Check ACK type */ + for (old = of_node_get(cascade); old != NULL ; old = np) { + np = of_get_parent(old); + of_node_put(old); + if (np == NULL) + break; + if (strcmp(np->name, "pci") != 0) + continue; + addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge", + NULL); + if (addrp == NULL) + continue; + naddr = prom_n_addr_cells(np); + intack = addrp[naddr-1]; + if (naddr > 1) + intack |= ((unsigned long)addrp[naddr-2]) << 32; + } + if (intack) + printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n", + intack); + i8259_init(cascade, intack); + of_node_put(cascade); + set_irq_chained_handler(cascade_irq, pseries_8259_cascade); } static void pseries_lpar_enable_pmcs(void) { unsigned long set, reset; - power4_enable_pmcs(); - set = 1UL << 63; reset = 0; plpar_hcall_norets(H_PERFMON, set, reset); @@ -192,23 +222,67 @@ static void pseries_lpar_enable_pmcs(void) get_lppaca()->pmcregs_in_use = 1; } -static void __init pSeries_setup_arch(void) +#ifdef CONFIG_KEXEC +static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary) { - /* Fixup ppc_md depending on the type of interrupt controller */ - if (ppc64_interrupt_controller == IC_OPEN_PIC) { - ppc_md.init_IRQ = pSeries_init_mpic; - ppc_md.get_irq = mpic_get_irq; - /* Allocate the mpic now, so that find_and_init_phbs() can - * fill the ISUs */ - pSeries_setup_mpic(); - } else { - ppc_md.init_IRQ = xics_init_IRQ; - ppc_md.get_irq = xics_get_irq; + mpic_teardown_this_cpu(secondary); +} + +static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary) +{ + /* Don't risk a hypervisor call if we're crashing */ + if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { + unsigned long vpa = __pa(get_lppaca()); + + if (unregister_vpa(hard_smp_processor_id(), vpa)) { + printk("VPA deregistration of cpu %u (hw_cpu_id %d) " + "failed\n", smp_processor_id(), + hard_smp_processor_id()); + } } + xics_teardown_cpu(secondary); +} +#endif /* CONFIG_KEXEC */ + +static void __init pseries_discover_pic(void) +{ + struct device_node *np; + char *typep; + for (np = NULL; (np = of_find_node_by_name(np, + "interrupt-controller"));) { + typep = (char *)get_property(np, "compatible", NULL); + if (strstr(typep, "open-pic")) { + pSeries_mpic_node = of_node_get(np); + ppc_md.init_IRQ = pseries_mpic_init_IRQ; + ppc_md.get_irq = mpic_get_irq; +#ifdef CONFIG_KEXEC + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic; +#endif #ifdef CONFIG_SMP - smp_init_pSeries(); + smp_init_pseries_mpic(); #endif + return; + } else if (strstr(typep, "ppc-xicp")) { + ppc_md.init_IRQ = xics_init_IRQ; +#ifdef CONFIG_KEXEC + ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics; +#endif +#ifdef CONFIG_SMP + smp_init_pseries_xics(); +#endif + return; + } + } + printk(KERN_ERR "pSeries_discover_pic: failed to recognize" + " interrupt-controller\n"); +} + +static void __init pSeries_setup_arch(void) +{ + /* Discover PIC type and setup ppc_md accordingly */ + pseries_discover_pic(); + /* openpic global configuration register (64-bit format). */ /* openpic Interrupt Source Unit pointer (64-bit format). */ /* python0 facility area (mmio) (64-bit format) REAL address. */ @@ -260,41 +334,11 @@ static int __init pSeries_init_panel(void) } arch_initcall(pSeries_init_panel); -static void __init pSeries_discover_pic(void) -{ - struct device_node *np; - char *typep; - - /* - * Setup interrupt mapping options that are needed for finish_device_tree - * to properly parse the OF interrupt tree & do the virtual irq mapping - */ - __irq_offset_value = NUM_ISA_INTERRUPTS; - ppc64_interrupt_controller = IC_INVALID; - for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) { - typep = (char *)get_property(np, "compatible", NULL); - if (strstr(typep, "open-pic")) { - ppc64_interrupt_controller = IC_OPEN_PIC; - break; - } else if (strstr(typep, "ppc-xicp")) { - ppc64_interrupt_controller = IC_PPC_XIC; - break; - } - } - if (ppc64_interrupt_controller == IC_INVALID) - printk("pSeries_discover_pic: failed to recognize" - " interrupt-controller\n"); - -} - static void pSeries_mach_cpu_die(void) { local_irq_disable(); idle_task_exit(); - /* Some hardware requires clearing the CPPR, while other hardware does not - * it is safe either way - */ - pSeriesLP_cppr_info(0, 0); + xics_teardown_cpu(0); rtas_stop_self(); /* Should never get here... */ BUG(); @@ -332,8 +376,6 @@ static void __init pSeries_init_early(void) iommu_init_early_pSeries(); - pSeries_discover_pic(); - DBG(" <- pSeries_init_early()\n"); } @@ -457,7 +499,8 @@ static void pseries_dedicated_idle_sleep(void) } /* - * Cede if the other thread is not idle, so that it can + * If not SMT, cede processor. If CPU is running SMT + * cede if the other thread is not idle, so that it can * go single-threaded. If the other thread is idle, * we ask the hypervisor if it has pending work it * wants to do and cede if it does. Otherwise we keep @@ -470,7 +513,8 @@ static void pseries_dedicated_idle_sleep(void) * very low priority. The cede enables interrupts, which * doesn't matter here. */ - if (!lppaca[cpu ^ 1].idle || poll_pending() == H_PENDING) + if (!cpu_has_feature(CPU_FTR_SMT) || !lppaca[cpu ^ 1].idle + || poll_pending() == H_PENDING) cede_processor(); out: @@ -505,27 +549,6 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus) return PCI_PROBE_NORMAL; } -#ifdef CONFIG_KEXEC -static void pseries_kexec_cpu_down(int crash_shutdown, int secondary) -{ - /* Don't risk a hypervisor call if we're crashing */ - if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) { - unsigned long vpa = __pa(get_lppaca()); - - if (unregister_vpa(hard_smp_processor_id(), vpa)) { - printk("VPA deregistration of cpu %u (hw_cpu_id %d) " - "failed\n", smp_processor_id(), - hard_smp_processor_id()); - } - } - - if (ppc64_interrupt_controller == IC_OPEN_PIC) - mpic_teardown_this_cpu(secondary); - else - xics_teardown_cpu(secondary); -} -#endif - define_machine(pseries) { .name = "pSeries", .probe = pSeries_probe, @@ -550,7 +573,6 @@ define_machine(pseries) { .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, #ifdef CONFIG_KEXEC - .kexec_cpu_down = pseries_kexec_cpu_down, .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, .machine_crash_shutdown = default_machine_crash_shutdown, diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index 4ad144df49c2..ac61098ff401 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -416,27 +416,12 @@ static struct smp_ops_t pSeries_xics_smp_ops = { #endif /* This is called very early */ -void __init smp_init_pSeries(void) +static void __init smp_init_pseries(void) { int i; DBG(" -> smp_init_pSeries()\n"); - switch (ppc64_interrupt_controller) { -#ifdef CONFIG_MPIC - case IC_OPEN_PIC: - smp_ops = &pSeries_mpic_smp_ops; - break; -#endif -#ifdef CONFIG_XICS - case IC_PPC_XIC: - smp_ops = &pSeries_xics_smp_ops; - break; -#endif - default: - panic("Invalid interrupt controller"); - } - #ifdef CONFIG_HOTPLUG_CPU smp_ops->cpu_disable = pSeries_cpu_disable; smp_ops->cpu_die = pSeries_cpu_die; @@ -471,3 +456,18 @@ void __init smp_init_pSeries(void) DBG(" <- smp_init_pSeries()\n"); } +#ifdef CONFIG_MPIC +void __init smp_init_pseries_mpic(void) +{ + smp_ops = &pSeries_mpic_smp_ops; + + smp_init_pseries(); +} +#endif + +void __init smp_init_pseries_xics(void) +{ + smp_ops = &pSeries_xics_smp_ops; + + smp_init_pseries(); +} diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 2ffebe31cb2d..e98863025721 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -8,6 +8,9 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ + +#undef DEBUG + #include <linux/types.h> #include <linux/threads.h> #include <linux/kernel.h> @@ -19,6 +22,7 @@ #include <linux/gfp.h> #include <linux/radix-tree.h> #include <linux/cpu.h> + #include <asm/firmware.h> #include <asm/prom.h> #include <asm/io.h> @@ -31,26 +35,6 @@ #include "xics.h" -static unsigned int xics_startup(unsigned int irq); -static void xics_enable_irq(unsigned int irq); -static void xics_disable_irq(unsigned int irq); -static void xics_mask_and_ack_irq(unsigned int irq); -static void xics_end_irq(unsigned int irq); -static void xics_set_affinity(unsigned int irq_nr, cpumask_t cpumask); - -static struct hw_interrupt_type xics_pic = { - .typename = " XICS ", - .startup = xics_startup, - .enable = xics_enable_irq, - .disable = xics_disable_irq, - .ack = xics_mask_and_ack_irq, - .end = xics_end_irq, - .set_affinity = xics_set_affinity -}; - -/* This is used to map real irq numbers to virtual */ -static struct radix_tree_root irq_map = RADIX_TREE_INIT(GFP_ATOMIC); - #define XICS_IPI 2 #define XICS_IRQ_SPURIOUS 0 @@ -81,12 +65,12 @@ struct xics_ipl { static struct xics_ipl __iomem *xics_per_cpu[NR_CPUS]; -static int xics_irq_8259_cascade = 0; -static int xics_irq_8259_cascade_real = 0; static unsigned int default_server = 0xFF; static unsigned int default_distrib_server = 0; static unsigned int interrupt_server_size = 8; +static struct irq_host *xics_host; + /* * XICS only has a single IPI, so encode the messages per CPU */ @@ -98,48 +82,34 @@ static int ibm_set_xive; static int ibm_int_on; static int ibm_int_off; -typedef struct { - int (*xirr_info_get)(int cpu); - void (*xirr_info_set)(int cpu, int val); - void (*cppr_info)(int cpu, u8 val); - void (*qirr_info)(int cpu, u8 val); -} xics_ops; +/* Direct HW low level accessors */ -/* SMP */ -static int pSeries_xirr_info_get(int n_cpu) +static inline unsigned int direct_xirr_info_get(int n_cpu) { return in_be32(&xics_per_cpu[n_cpu]->xirr.word); } -static void pSeries_xirr_info_set(int n_cpu, int value) +static inline void direct_xirr_info_set(int n_cpu, int value) { out_be32(&xics_per_cpu[n_cpu]->xirr.word, value); } -static void pSeries_cppr_info(int n_cpu, u8 value) +static inline void direct_cppr_info(int n_cpu, u8 value) { out_8(&xics_per_cpu[n_cpu]->xirr.bytes[0], value); } -static void pSeries_qirr_info(int n_cpu, u8 value) +static inline void direct_qirr_info(int n_cpu, u8 value) { out_8(&xics_per_cpu[n_cpu]->qirr.bytes[0], value); } -static xics_ops pSeries_ops = { - pSeries_xirr_info_get, - pSeries_xirr_info_set, - pSeries_cppr_info, - pSeries_qirr_info -}; -static xics_ops *ops = &pSeries_ops; +/* LPAR low level accessors */ -/* LPAR */ - static inline long plpar_eoi(unsigned long xirr) { return plpar_hcall_norets(H_EOI, xirr); @@ -161,7 +131,7 @@ static inline long plpar_xirr(unsigned long *xirr_ret) return plpar_hcall(H_XIRR, 0, 0, 0, 0, xirr_ret, &dummy, &dummy); } -static int pSeriesLP_xirr_info_get(int n_cpu) +static inline unsigned int lpar_xirr_info_get(int n_cpu) { unsigned long lpar_rc; unsigned long return_value; @@ -169,10 +139,10 @@ static int pSeriesLP_xirr_info_get(int n_cpu) lpar_rc = plpar_xirr(&return_value); if (lpar_rc != H_SUCCESS) panic(" bad return code xirr - rc = %lx \n", lpar_rc); - return (int)return_value; + return (unsigned int)return_value; } -static void pSeriesLP_xirr_info_set(int n_cpu, int value) +static inline void lpar_xirr_info_set(int n_cpu, int value) { unsigned long lpar_rc; unsigned long val64 = value & 0xffffffff; @@ -183,7 +153,7 @@ static void pSeriesLP_xirr_info_set(int n_cpu, int value) val64); } -void pSeriesLP_cppr_info(int n_cpu, u8 value) +static inline void lpar_cppr_info(int n_cpu, u8 value) { unsigned long lpar_rc; @@ -192,7 +162,7 @@ void pSeriesLP_cppr_info(int n_cpu, u8 value) panic("bad return code cppr - rc = %lx\n", lpar_rc); } -static void pSeriesLP_qirr_info(int n_cpu , u8 value) +static inline void lpar_qirr_info(int n_cpu , u8 value) { unsigned long lpar_rc; @@ -201,43 +171,16 @@ static void pSeriesLP_qirr_info(int n_cpu , u8 value) panic("bad return code qirr - rc = %lx\n", lpar_rc); } -xics_ops pSeriesLP_ops = { - pSeriesLP_xirr_info_get, - pSeriesLP_xirr_info_set, - pSeriesLP_cppr_info, - pSeriesLP_qirr_info -}; - -static unsigned int xics_startup(unsigned int virq) -{ - unsigned int irq; - - irq = irq_offset_down(virq); - if (radix_tree_insert(&irq_map, virt_irq_to_real(irq), - &virt_irq_to_real_map[irq]) == -ENOMEM) - printk(KERN_CRIT "Out of memory creating real -> virtual" - " IRQ mapping for irq %u (real 0x%x)\n", - virq, virt_irq_to_real(irq)); - xics_enable_irq(virq); - return 0; /* return value is ignored */ -} -static unsigned int real_irq_to_virt(unsigned int real_irq) -{ - unsigned int *ptr; +/* High level handlers and init code */ - ptr = radix_tree_lookup(&irq_map, real_irq); - if (ptr == NULL) - return NO_IRQ; - return ptr - virt_irq_to_real_map; -} #ifdef CONFIG_SMP -static int get_irq_server(unsigned int irq) +static int get_irq_server(unsigned int virq) { unsigned int server; /* For the moment only implement delivery to all cpus or one cpu */ - cpumask_t cpumask = irq_desc[irq].affinity; + cpumask_t cpumask = irq_desc[virq].affinity; cpumask_t tmp = CPU_MASK_NONE; if (!distribute_irqs) @@ -258,23 +201,28 @@ static int get_irq_server(unsigned int irq) } #else -static int get_irq_server(unsigned int irq) +static int get_irq_server(unsigned int virq) { return default_server; } #endif -static void xics_enable_irq(unsigned int virq) + +static void xics_unmask_irq(unsigned int virq) { unsigned int irq; int call_status; unsigned int server; - irq = virt_irq_to_real(irq_offset_down(virq)); - if (irq == XICS_IPI) + pr_debug("xics: unmask virq %d\n", virq); + + irq = (unsigned int)irq_map[virq].hwirq; + pr_debug(" -> map to hwirq 0x%x\n", irq); + if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) return; server = get_irq_server(virq); + call_status = rtas_call(ibm_set_xive, 3, 1, NULL, irq, server, DEFAULT_PRIORITY); if (call_status != 0) { @@ -293,7 +241,7 @@ static void xics_enable_irq(unsigned int virq) } } -static void xics_disable_real_irq(unsigned int irq) +static void xics_mask_real_irq(unsigned int irq) { int call_status; unsigned int server; @@ -318,75 +266,86 @@ static void xics_disable_real_irq(unsigned int irq) } } -static void xics_disable_irq(unsigned int virq) +static void xics_mask_irq(unsigned int virq) { unsigned int irq; - irq = virt_irq_to_real(irq_offset_down(virq)); - xics_disable_real_irq(irq); + pr_debug("xics: mask virq %d\n", virq); + + irq = (unsigned int)irq_map[virq].hwirq; + if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) + return; + xics_mask_real_irq(irq); } -static void xics_end_irq(unsigned int irq) +static unsigned int xics_startup(unsigned int virq) +{ + unsigned int irq; + + /* force a reverse mapping of the interrupt so it gets in the cache */ + irq = (unsigned int)irq_map[virq].hwirq; + irq_radix_revmap(xics_host, irq); + + /* unmask it */ + xics_unmask_irq(virq); + return 0; +} + +static void xics_eoi_direct(unsigned int virq) { int cpu = smp_processor_id(); + unsigned int irq = (unsigned int)irq_map[virq].hwirq; iosync(); - ops->xirr_info_set(cpu, ((0xff << 24) | - (virt_irq_to_real(irq_offset_down(irq))))); - + direct_xirr_info_set(cpu, (0xff << 24) | irq); } -static void xics_mask_and_ack_irq(unsigned int irq) + +static void xics_eoi_lpar(unsigned int virq) { int cpu = smp_processor_id(); + unsigned int irq = (unsigned int)irq_map[virq].hwirq; - if (irq < irq_offset_value()) { - i8259_pic.ack(irq); - iosync(); - ops->xirr_info_set(cpu, ((0xff<<24) | - xics_irq_8259_cascade_real)); - iosync(); - } + iosync(); + lpar_xirr_info_set(cpu, (0xff << 24) | irq); } -int xics_get_irq(struct pt_regs *regs) +static inline unsigned int xics_remap_irq(unsigned int vec) { - unsigned int cpu = smp_processor_id(); - unsigned int vec; - int irq; + unsigned int irq; - vec = ops->xirr_info_get(cpu); - /* (vec >> 24) == old priority */ vec &= 0x00ffffff; - /* for sanity, this had better be < NR_IRQS - 16 */ - if (vec == xics_irq_8259_cascade_real) { - irq = i8259_irq(regs); - xics_end_irq(irq_offset_up(xics_irq_8259_cascade)); - } else if (vec == XICS_IRQ_SPURIOUS) { - irq = -1; - } else { - irq = real_irq_to_virt(vec); - if (irq == NO_IRQ) - irq = real_irq_to_virt_slowpath(vec); - if (irq == NO_IRQ) { - printk(KERN_ERR "Interrupt %u (real) is invalid," - " disabling it.\n", vec); - xics_disable_real_irq(vec); - } else - irq = irq_offset_up(irq); - } - return irq; + if (vec == XICS_IRQ_SPURIOUS) + return NO_IRQ; + irq = irq_radix_revmap(xics_host, vec); + if (likely(irq != NO_IRQ)) + return irq; + + printk(KERN_ERR "Interrupt %u (real) is invalid," + " disabling it.\n", vec); + xics_mask_real_irq(vec); + return NO_IRQ; } -#ifdef CONFIG_SMP +static unsigned int xics_get_irq_direct(struct pt_regs *regs) +{ + unsigned int cpu = smp_processor_id(); -static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs) + return xics_remap_irq(direct_xirr_info_get(cpu)); +} + +static unsigned int xics_get_irq_lpar(struct pt_regs *regs) { - int cpu = smp_processor_id(); + unsigned int cpu = smp_processor_id(); - ops->qirr_info(cpu, 0xff); + return xics_remap_irq(lpar_xirr_info_get(cpu)); +} +#ifdef CONFIG_SMP + +static irqreturn_t xics_ipi_dispatch(int cpu, struct pt_regs *regs) +{ WARN_ON(cpu_is_offline(cpu)); while (xics_ipi_message[cpu].value) { @@ -418,18 +377,88 @@ static irqreturn_t xics_ipi_action(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } +static irqreturn_t xics_ipi_action_direct(int irq, void *dev_id, struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + direct_qirr_info(cpu, 0xff); + + return xics_ipi_dispatch(cpu, regs); +} + +static irqreturn_t xics_ipi_action_lpar(int irq, void *dev_id, struct pt_regs *regs) +{ + int cpu = smp_processor_id(); + + lpar_qirr_info(cpu, 0xff); + + return xics_ipi_dispatch(cpu, regs); +} + void xics_cause_IPI(int cpu) { - ops->qirr_info(cpu, IPI_PRIORITY); + if (firmware_has_feature(FW_FEATURE_LPAR)) + lpar_qirr_info(cpu, IPI_PRIORITY); + else + direct_qirr_info(cpu, IPI_PRIORITY); } + #endif /* CONFIG_SMP */ +static void xics_set_cpu_priority(int cpu, unsigned char cppr) +{ + if (firmware_has_feature(FW_FEATURE_LPAR)) + lpar_cppr_info(cpu, cppr); + else + direct_cppr_info(cpu, cppr); + iosync(); +} + +static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) +{ + unsigned int irq; + int status; + int xics_status[2]; + unsigned long newmask; + cpumask_t tmp = CPU_MASK_NONE; + + irq = (unsigned int)irq_map[virq].hwirq; + if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) + return; + + status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); + + if (status) { + printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive " + "returns %d\n", irq, status); + return; + } + + /* For the moment only implement delivery to all cpus or one cpu */ + if (cpus_equal(cpumask, CPU_MASK_ALL)) { + newmask = default_distrib_server; + } else { + cpus_and(tmp, cpu_online_map, cpumask); + if (cpus_empty(tmp)) + return; + newmask = get_hard_smp_processor_id(first_cpu(tmp)); + } + + status = rtas_call(ibm_set_xive, 3, 1, NULL, + irq, newmask, xics_status[1]); + + if (status) { + printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive " + "returns %d\n", irq, status); + return; + } +} + void xics_setup_cpu(void) { int cpu = smp_processor_id(); - ops->cppr_info(cpu, 0xff); - iosync(); + xics_set_cpu_priority(cpu, 0xff); /* * Put the calling processor into the GIQ. This is really only @@ -438,76 +467,256 @@ void xics_setup_cpu(void) * * XXX: undo of teardown on kexec needs this too, as may hotplug */ - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 1); } -void xics_init_IRQ(void) + +static struct irq_chip xics_pic_direct = { + .typename = " XICS ", + .startup = xics_startup, + .mask = xics_mask_irq, + .unmask = xics_unmask_irq, + .eoi = xics_eoi_direct, + .set_affinity = xics_set_affinity +}; + + +static struct irq_chip xics_pic_lpar = { + .typename = " XICS ", + .startup = xics_startup, + .mask = xics_mask_irq, + .unmask = xics_unmask_irq, + .eoi = xics_eoi_lpar, + .set_affinity = xics_set_affinity +}; + + +static int xics_host_match(struct irq_host *h, struct device_node *node) +{ + /* IBM machines have interrupt parents of various funky types for things + * like vdevices, events, etc... The trick we use here is to match + * everything here except the legacy 8259 which is compatible "chrp,iic" + */ + return !device_is_compatible(node, "chrp,iic"); +} + +static int xics_host_map_direct(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); + + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &xics_pic_direct, handle_fasteoi_irq); + return 0; +} + +static int xics_host_map_lpar(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("xics: map_direct virq %d, hwirq 0x%lx\n", virq, hw); + + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &xics_pic_lpar, handle_fasteoi_irq); + return 0; +} + +static int xics_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + +{ + /* Current xics implementation translates everything + * to level. It is not technically right for MSIs but this + * is irrelevant at this point. We might get smarter in the future + */ + *out_hwirq = intspec[0]; + *out_flags = IRQ_TYPE_LEVEL_LOW; + + return 0; +} + +static struct irq_host_ops xics_host_direct_ops = { + .match = xics_host_match, + .map = xics_host_map_direct, + .xlate = xics_host_xlate, +}; + +static struct irq_host_ops xics_host_lpar_ops = { + .match = xics_host_match, + .map = xics_host_map_lpar, + .xlate = xics_host_xlate, +}; + +static void __init xics_init_host(void) { + struct irq_host_ops *ops; + + if (firmware_has_feature(FW_FEATURE_LPAR)) + ops = &xics_host_lpar_ops; + else + ops = &xics_host_direct_ops; + xics_host = irq_alloc_host(IRQ_HOST_MAP_TREE, 0, ops, + XICS_IRQ_SPURIOUS); + BUG_ON(xics_host == NULL); + irq_set_default_host(xics_host); +} + +static void __init xics_map_one_cpu(int hw_id, unsigned long addr, + unsigned long size) +{ +#ifdef CONFIG_SMP int i; - unsigned long intr_size = 0; - struct device_node *np; - uint *ireg, ilen, indx = 0; - unsigned long intr_base = 0; - struct xics_interrupt_node { - unsigned long addr; - unsigned long size; - } intnodes[NR_CPUS]; - ppc64_boot_msg(0x20, "XICS Init"); + /* This may look gross but it's good enough for now, we don't quite + * have a hard -> linux processor id matching. + */ + for_each_possible_cpu(i) { + if (!cpu_present(i)) + continue; + if (hw_id == get_hard_smp_processor_id(i)) { + xics_per_cpu[i] = ioremap(addr, size); + return; + } + } +#else + if (hw_id != 0) + return; + xics_per_cpu[0] = ioremap(addr, size); +#endif /* CONFIG_SMP */ +} - ibm_get_xive = rtas_token("ibm,get-xive"); - ibm_set_xive = rtas_token("ibm,set-xive"); - ibm_int_on = rtas_token("ibm,int-on"); - ibm_int_off = rtas_token("ibm,int-off"); +static void __init xics_init_one_node(struct device_node *np, + unsigned int *indx) +{ + unsigned int ilen; + u32 *ireg; - np = of_find_node_by_type(NULL, "PowerPC-External-Interrupt-Presentation"); - if (!np) - panic("xics_init_IRQ: can't find interrupt presentation"); + /* This code does the theorically broken assumption that the interrupt + * server numbers are the same as the hard CPU numbers. + * This happens to be the case so far but we are playing with fire... + * should be fixed one of these days. -BenH. + */ + ireg = (u32 *)get_property(np, "ibm,interrupt-server-ranges", NULL); -nextnode: - ireg = (uint *)get_property(np, "ibm,interrupt-server-ranges", NULL); + /* Do that ever happen ? we'll know soon enough... but even good'old + * f80 does have that property .. + */ + WARN_ON(ireg == NULL); if (ireg) { /* * set node starting index for this node */ - indx = *ireg; + *indx = *ireg; } - - ireg = (uint *)get_property(np, "reg", &ilen); + ireg = (u32 *)get_property(np, "reg", &ilen); if (!ireg) panic("xics_init_IRQ: can't find interrupt reg property"); - while (ilen) { - intnodes[indx].addr = (unsigned long)*ireg++ << 32; - ilen -= sizeof(uint); - intnodes[indx].addr |= *ireg++; - ilen -= sizeof(uint); - intnodes[indx].size = (unsigned long)*ireg++ << 32; - ilen -= sizeof(uint); - intnodes[indx].size |= *ireg++; - ilen -= sizeof(uint); - indx++; - if (indx >= NR_CPUS) break; + while (ilen >= (4 * sizeof(u32))) { + unsigned long addr, size; + + /* XXX Use proper OF parsing code here !!! */ + addr = (unsigned long)*ireg++ << 32; + ilen -= sizeof(u32); + addr |= *ireg++; + ilen -= sizeof(u32); + size = (unsigned long)*ireg++ << 32; + ilen -= sizeof(u32); + size |= *ireg++; + ilen -= sizeof(u32); + xics_map_one_cpu(*indx, addr, size); + (*indx)++; } +} + + +static void __init xics_setup_8259_cascade(void) +{ + struct device_node *np, *old, *found = NULL; + int cascade, naddr; + u32 *addrp; + unsigned long intack = 0; + + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + found = np; + break; + } + if (found == NULL) { + printk(KERN_DEBUG "xics: no ISA interrupt controller\n"); + return; + } + cascade = irq_of_parse_and_map(found, 0); + if (cascade == NO_IRQ) { + printk(KERN_ERR "xics: failed to map cascade interrupt"); + return; + } + pr_debug("xics: cascade mapped to irq %d\n", cascade); - np = of_find_node_by_type(np, "PowerPC-External-Interrupt-Presentation"); - if ((indx < NR_CPUS) && np) goto nextnode; + for (old = of_node_get(found); old != NULL ; old = np) { + np = of_get_parent(old); + of_node_put(old); + if (np == NULL) + break; + if (strcmp(np->name, "pci") != 0) + continue; + addrp = (u32 *)get_property(np, "8259-interrupt-acknowledge", NULL); + if (addrp == NULL) + continue; + naddr = prom_n_addr_cells(np); + intack = addrp[naddr-1]; + if (naddr > 1) + intack |= ((unsigned long)addrp[naddr-2]) << 32; + } + if (intack) + printk(KERN_DEBUG "xics: PCI 8259 intack at 0x%016lx\n", intack); + i8259_init(found, intack); + of_node_put(found); + set_irq_chained_handler(cascade, pseries_8259_cascade); +} + +void __init xics_init_IRQ(void) +{ + int i; + struct device_node *np; + u32 *ireg, ilen, indx = 0; + int found = 0; + + ppc64_boot_msg(0x20, "XICS Init"); + + ibm_get_xive = rtas_token("ibm,get-xive"); + ibm_set_xive = rtas_token("ibm,set-xive"); + ibm_int_on = rtas_token("ibm,int-on"); + ibm_int_off = rtas_token("ibm,int-off"); + + for_each_node_by_type(np, "PowerPC-External-Interrupt-Presentation") { + found = 1; + if (firmware_has_feature(FW_FEATURE_LPAR)) + break; + xics_init_one_node(np, &indx); + } + if (found == 0) + return; + + xics_init_host(); /* Find the server numbers for the boot cpu. */ for (np = of_find_node_by_type(NULL, "cpu"); np; np = of_find_node_by_type(np, "cpu")) { - ireg = (uint *)get_property(np, "reg", &ilen); + ireg = (u32 *)get_property(np, "reg", &ilen); if (ireg && ireg[0] == get_hard_smp_processor_id(boot_cpuid)) { - ireg = (uint *)get_property(np, "ibm,ppc-interrupt-gserver#s", - &ilen); + ireg = (u32 *)get_property(np, + "ibm,ppc-interrupt-gserver#s", + &ilen); i = ilen / sizeof(int); if (ireg && i > 0) { default_server = ireg[0]; - default_distrib_server = ireg[i-1]; /* take last element */ + /* take last element */ + default_distrib_server = ireg[i-1]; } - ireg = (uint *)get_property(np, + ireg = (u32 *)get_property(np, "ibm,interrupt-server#-size", NULL); if (ireg) interrupt_server_size = *ireg; @@ -516,135 +725,56 @@ nextnode: } of_node_put(np); - intr_base = intnodes[0].addr; - intr_size = intnodes[0].size; - - np = of_find_node_by_type(NULL, "interrupt-controller"); - if (!np) { - printk(KERN_DEBUG "xics: no ISA interrupt controller\n"); - xics_irq_8259_cascade_real = -1; - xics_irq_8259_cascade = -1; - } else { - ireg = (uint *) get_property(np, "interrupts", NULL); - if (!ireg) - panic("xics_init_IRQ: can't find ISA interrupts property"); - - xics_irq_8259_cascade_real = *ireg; - xics_irq_8259_cascade - = virt_irq_create_mapping(xics_irq_8259_cascade_real); - i8259_init(0, 0); - of_node_put(np); - } - if (firmware_has_feature(FW_FEATURE_LPAR)) - ops = &pSeriesLP_ops; - else { -#ifdef CONFIG_SMP - for_each_possible_cpu(i) { - int hard_id; - - /* FIXME: Do this dynamically! --RR */ - if (!cpu_present(i)) - continue; - - hard_id = get_hard_smp_processor_id(i); - xics_per_cpu[i] = ioremap(intnodes[hard_id].addr, - intnodes[hard_id].size); - } -#else - xics_per_cpu[0] = ioremap(intr_base, intr_size); -#endif /* CONFIG_SMP */ - } - - for (i = irq_offset_value(); i < NR_IRQS; ++i) - get_irq_desc(i)->chip = &xics_pic; + ppc_md.get_irq = xics_get_irq_lpar; + else + ppc_md.get_irq = xics_get_irq_direct; xics_setup_cpu(); + xics_setup_8259_cascade(); + ppc64_boot_msg(0x21, "XICS Done"); } -/* - * We cant do this in init_IRQ because we need the memory subsystem up for - * request_irq() - */ -static int __init xics_setup_i8259(void) -{ - if (ppc64_interrupt_controller == IC_PPC_XIC && - xics_irq_8259_cascade != -1) { - if (request_irq(irq_offset_up(xics_irq_8259_cascade), - no_action, 0, "8259 cascade", NULL)) - printk(KERN_ERR "xics_setup_i8259: couldn't get 8259 " - "cascade\n"); - } - return 0; -} -arch_initcall(xics_setup_i8259); #ifdef CONFIG_SMP void xics_request_IPIs(void) { - virt_irq_to_real_map[XICS_IPI] = XICS_IPI; + unsigned int ipi; + + ipi = irq_create_mapping(xics_host, XICS_IPI); + BUG_ON(ipi == NO_IRQ); /* * IPIs are marked IRQF_DISABLED as they must run with irqs * disabled */ - request_irq(irq_offset_up(XICS_IPI), xics_ipi_action, - IRQF_DISABLED, "IPI", NULL); - get_irq_desc(irq_offset_up(XICS_IPI))->status |= IRQ_PER_CPU; -} -#endif - -static void xics_set_affinity(unsigned int virq, cpumask_t cpumask) -{ - unsigned int irq; - int status; - int xics_status[2]; - unsigned long newmask; - cpumask_t tmp = CPU_MASK_NONE; - - irq = virt_irq_to_real(irq_offset_down(virq)); - if (irq == XICS_IPI || irq == NO_IRQ) - return; - - status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq); - - if (status) { - printk(KERN_ERR "xics_set_affinity: irq=%u ibm,get-xive " - "returns %d\n", irq, status); - return; - } - - /* For the moment only implement delivery to all cpus or one cpu */ - if (cpus_equal(cpumask, CPU_MASK_ALL)) { - newmask = default_distrib_server; - } else { - cpus_and(tmp, cpu_online_map, cpumask); - if (cpus_empty(tmp)) - return; - newmask = get_hard_smp_processor_id(first_cpu(tmp)); - } - - status = rtas_call(ibm_set_xive, 3, 1, NULL, - irq, newmask, xics_status[1]); - - if (status) { - printk(KERN_ERR "xics_set_affinity: irq=%u ibm,set-xive " - "returns %d\n", irq, status); - return; - } + set_irq_handler(ipi, handle_percpu_irq); + if (firmware_has_feature(FW_FEATURE_LPAR)) + request_irq(ipi, xics_ipi_action_lpar, IRQF_DISABLED, + "IPI", NULL); + else + request_irq(ipi, xics_ipi_action_direct, IRQF_DISABLED, + "IPI", NULL); } +#endif /* CONFIG_SMP */ void xics_teardown_cpu(int secondary) { int cpu = smp_processor_id(); + unsigned int ipi; + struct irq_desc *desc; - ops->cppr_info(cpu, 0x00); - iosync(); + xics_set_cpu_priority(cpu, 0); - /* Clear IPI */ - ops->qirr_info(cpu, 0xff); + /* + * Clear IPI + */ + if (firmware_has_feature(FW_FEATURE_LPAR)) + lpar_qirr_info(cpu, 0xff); + else + direct_qirr_info(cpu, 0xff); /* * we need to EOI the IPI if we got here from kexec down IPI @@ -653,16 +783,22 @@ void xics_teardown_cpu(int secondary) * should we be flagging idle loop instead? * or creating some task to be scheduled? */ - ops->xirr_info_set(cpu, XICS_IPI); + + ipi = irq_find_mapping(xics_host, XICS_IPI); + if (ipi == XICS_IRQ_SPURIOUS) + return; + desc = get_irq_desc(ipi); + if (desc->chip && desc->chip->eoi) + desc->chip->eoi(ipi); /* * Some machines need to have at least one cpu in the GIQ, * so leave the master cpu in the group. */ if (secondary) - rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, - (1UL << interrupt_server_size) - 1 - - default_distrib_server, 0); + rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, + (1UL << interrupt_server_size) - 1 - + default_distrib_server, 0); } #ifdef CONFIG_HOTPLUG_CPU @@ -674,33 +810,31 @@ void xics_migrate_irqs_away(void) unsigned int irq, virq, cpu = smp_processor_id(); /* Reject any interrupt that was queued to us... */ - ops->cppr_info(cpu, 0); - iosync(); + xics_set_cpu_priority(cpu, 0); /* remove ourselves from the global interrupt queue */ - status = rtas_set_indicator(GLOBAL_INTERRUPT_QUEUE, + status = rtas_set_indicator_fast(GLOBAL_INTERRUPT_QUEUE, (1UL << interrupt_server_size) - 1 - default_distrib_server, 0); WARN_ON(status < 0); /* Allow IPIs again... */ - ops->cppr_info(cpu, DEFAULT_PRIORITY); - iosync(); + xics_set_cpu_priority(cpu, DEFAULT_PRIORITY); for_each_irq(virq) { - irq_desc_t *desc; + struct irq_desc *desc; int xics_status[2]; unsigned long flags; /* We cant set affinity on ISA interrupts */ - if (virq < irq_offset_value()) + if (virq < NUM_ISA_INTERRUPTS) continue; - - desc = get_irq_desc(virq); - irq = virt_irq_to_real(irq_offset_down(virq)); - + if (irq_map[virq].host != xics_host) + continue; + irq = (unsigned int)irq_map[virq].hwirq; /* We need to get IPIs still. */ - if (irq == XICS_IPI || irq == NO_IRQ) + if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS) continue; + desc = get_irq_desc(virq); /* We only need to migrate enabled IRQS */ if (desc == NULL || desc->chip == NULL diff --git a/arch/powerpc/platforms/pseries/xics.h b/arch/powerpc/platforms/pseries/xics.h index e14c70868f1d..6ee1055b0ffb 100644 --- a/arch/powerpc/platforms/pseries/xics.h +++ b/arch/powerpc/platforms/pseries/xics.h @@ -14,13 +14,12 @@ #include <linux/cache.h> -void xics_init_IRQ(void); -int xics_get_irq(struct pt_regs *); -void xics_setup_cpu(void); -void xics_teardown_cpu(int secondary); -void xics_cause_IPI(int cpu); -void xics_request_IPIs(void); -void xics_migrate_irqs_away(void); +extern void xics_init_IRQ(void); +extern void xics_setup_cpu(void); +extern void xics_teardown_cpu(int secondary); +extern void xics_cause_IPI(int cpu); +extern void xics_request_IPIs(void); +extern void xics_migrate_irqs_away(void); /* first argument is ignored for now*/ void pSeriesLP_cppr_info(int n_cpu, u8 value); @@ -31,4 +30,8 @@ struct xics_ipi_struct { extern struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; +struct irq_desc; +extern void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); + #endif /* _POWERPC_KERNEL_XICS_H */ diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 054bd8b41ef5..e5e999ea891a 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -4,13 +4,16 @@ endif obj-$(CONFIG_MPIC) += mpic.o obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o -obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_MPC106) += grackle.o obj-$(CONFIG_BOOKE) += dcr.o obj-$(CONFIG_40x) += dcr.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o -obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o obj-$(CONFIG_PPC_TODC) += todc.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o + +ifeq ($(CONFIG_PPC_MERGE),y) +obj-$(CONFIG_PPC_I8259) += i8259.o +obj-$(CONFIG_PPC_83xx) += ipic.o +endif diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index e32fadde1f77..03b4477dd7f0 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -139,6 +139,7 @@ wait_more: static void dart_flush(struct iommu_table *tbl) { + mb(); if (dart_dirty) { dart_tlb_invalidate_all(); dart_dirty = 0; @@ -172,9 +173,13 @@ static void dart_build(struct iommu_table *tbl, long index, uaddr += DART_PAGE_SIZE; } + /* make sure all updates have reached memory */ + mb(); + in_be32((unsigned __iomem *)dp); + mb(); + if (dart_is_u4) { rpn = index; - mb(); /* make sure all updates have reached memory */ while (npages--) dart_tlb_invalidate_one(rpn++); } else { diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index e983972132d8..ef10bcf2d943 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -85,11 +85,8 @@ static int __init gfar_mdio_of_init(void) mdio_data.irq[k] = -1; while ((child = of_get_next_child(np, child)) != NULL) { - if (child->n_intrs) { - u32 *id = - (u32 *) get_property(child, "reg", NULL); - mdio_data.irq[*id] = child->intrs[0].line; - } + u32 *id = get_property(child, "reg", NULL); + mdio_data.irq[*id] = irq_of_parse_and_map(child, 0); } ret = @@ -131,6 +128,7 @@ static int __init gfar_of_init(void) char *model; void *mac_addr; phandle *ph; + int n_res = 1; memset(r, 0, sizeof(r)); memset(&gfar_data, 0, sizeof(gfar_data)); @@ -139,8 +137,7 @@ static int __init gfar_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; model = get_property(np, "model", NULL); @@ -150,27 +147,35 @@ static int __init gfar_of_init(void) r[1].name = gfar_tx_intr; r[2].name = gfar_rx_intr; - r[2].start = np->intrs[1].line; - r[2].end = np->intrs[1].line; + r[2].start = r[2].end = irq_of_parse_and_map(np, 1); r[2].flags = IORESOURCE_IRQ; r[3].name = gfar_err_intr; - r[3].start = np->intrs[2].line; - r[3].end = np->intrs[2].line; + r[3].start = r[3].end = irq_of_parse_and_map(np, 2); r[3].flags = IORESOURCE_IRQ; + + n_res += 2; } gfar_dev = platform_device_register_simple("fsl-gianfar", i, &r[0], - np->n_intrs + 1); + n_res + 1); if (IS_ERR(gfar_dev)) { ret = PTR_ERR(gfar_dev); goto err; } - mac_addr = get_property(np, "address", NULL); - memcpy(gfar_data.mac_addr, mac_addr, 6); + mac_addr = get_property(np, "local-mac-address", NULL); + if (mac_addr == NULL) + mac_addr = get_property(np, "mac-address", NULL); + if (mac_addr == NULL) { + /* Obsolete */ + mac_addr = get_property(np, "address", NULL); + } + + if (mac_addr) + memcpy(gfar_data.mac_addr, mac_addr, 6); if (model && !strcasecmp(model, "TSEC")) gfar_data.device_flags = @@ -251,8 +256,7 @@ static int __init fsl_i2c_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2); @@ -388,8 +392,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto err; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_mph = @@ -437,8 +440,7 @@ static int __init fsl_usb_of_init(void) if (ret) goto unreg_mph; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; usb_dev_dr = diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 1a3ef1ab9d6e..9855820b9548 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -6,11 +6,16 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#undef DEBUG + #include <linux/init.h> #include <linux/ioport.h> #include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/delay.h> #include <asm/io.h> #include <asm/i8259.h> +#include <asm/prom.h> static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */ @@ -20,7 +25,8 @@ static unsigned char cached_8259[2] = { 0xff, 0xff }; static DEFINE_SPINLOCK(i8259_lock); -static int i8259_pic_irq_offset; +static struct device_node *i8259_node; +static struct irq_host *i8259_host; /* * Acknowledge the IRQ using either the PCI host bridge's interrupt @@ -28,16 +34,18 @@ static int i8259_pic_irq_offset; * which is called. It should be noted that polling is broken on some * IBM and Motorola PReP boxes so we must use the int-ack feature on them. */ -int i8259_irq(struct pt_regs *regs) +unsigned int i8259_irq(struct pt_regs *regs) { int irq; - - spin_lock(&i8259_lock); + int lock = 0; /* Either int-ack or poll for the IRQ */ if (pci_intack) irq = readb(pci_intack); else { + spin_lock(&i8259_lock); + lock = 1; + /* Perform an interrupt acknowledge cycle on controller 1. */ outb(0x0C, 0x20); /* prepare for poll */ irq = inb(0x20) & 7; @@ -62,16 +70,13 @@ int i8259_irq(struct pt_regs *regs) if (!pci_intack) outb(0x0B, 0x20); /* ISR register */ if(~inb(0x20) & 0x80) - irq = -1; - } + irq = NO_IRQ; + } else if (irq == 0xff) + irq = NO_IRQ; - spin_unlock(&i8259_lock); - return irq + i8259_pic_irq_offset; -} - -int i8259_irq_cascade(struct pt_regs *regs, void *unused) -{ - return i8259_irq(regs); + if (lock) + spin_unlock(&i8259_lock); + return irq; } static void i8259_mask_and_ack_irq(unsigned int irq_nr) @@ -79,7 +84,6 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr) unsigned long flags; spin_lock_irqsave(&i8259_lock, flags); - irq_nr -= i8259_pic_irq_offset; if (irq_nr > 7) { cached_A1 |= 1 << (irq_nr-8); inb(0xA1); /* DUMMY */ @@ -105,8 +109,9 @@ static void i8259_mask_irq(unsigned int irq_nr) { unsigned long flags; + pr_debug("i8259_mask_irq(%d)\n", irq_nr); + spin_lock_irqsave(&i8259_lock, flags); - irq_nr -= i8259_pic_irq_offset; if (irq_nr < 8) cached_21 |= 1 << irq_nr; else @@ -119,8 +124,9 @@ static void i8259_unmask_irq(unsigned int irq_nr) { unsigned long flags; + pr_debug("i8259_unmask_irq(%d)\n", irq_nr); + spin_lock_irqsave(&i8259_lock, flags); - irq_nr -= i8259_pic_irq_offset; if (irq_nr < 8) cached_21 &= ~(1 << irq_nr); else @@ -129,19 +135,11 @@ static void i8259_unmask_irq(unsigned int irq_nr) spin_unlock_irqrestore(&i8259_lock, flags); } -static void i8259_end_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)) - && irq_desc[irq].action) - i8259_unmask_irq(irq); -} - -struct hw_interrupt_type i8259_pic = { - .typename = " i8259 ", - .enable = i8259_unmask_irq, - .disable = i8259_mask_irq, - .ack = i8259_mask_and_ack_irq, - .end = i8259_end_irq, +static struct irq_chip i8259_pic = { + .typename = " i8259 ", + .mask = i8259_mask_irq, + .unmask = i8259_unmask_irq, + .mask_ack = i8259_mask_and_ack_irq, }; static struct resource pic1_iores = { @@ -165,25 +163,84 @@ static struct resource pic_edgectrl_iores = { .flags = IORESOURCE_BUSY, }; -static struct irqaction i8259_irqaction = { - .handler = no_action, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "82c59 secondary cascade", +static int i8259_host_match(struct irq_host *h, struct device_node *node) +{ + return i8259_node == NULL || i8259_node == node; +} + +static int i8259_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + pr_debug("i8259_host_map(%d, 0x%lx)\n", virq, hw); + + /* We block the internal cascade */ + if (hw == 2) + get_irq_desc(virq)->status |= IRQ_NOREQUEST; + + /* We use the level handler only for now, we might want to + * be more cautious here but that works for now + */ + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &i8259_pic, handle_level_irq); + return 0; +} + +static void i8259_host_unmap(struct irq_host *h, unsigned int virq) +{ + /* Make sure irq is masked in hardware */ + i8259_mask_irq(virq); + + /* remove chip and handler */ + set_irq_chip_and_handler(virq, NULL, NULL); + + /* Make sure it's completed */ + synchronize_irq(virq); +} + +static int i8259_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) +{ + static unsigned char map_isa_senses[4] = { + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + IRQ_TYPE_EDGE_RISING, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1 && intspec[1] < 4) + *out_flags = map_isa_senses[intspec[1]]; + else + *out_flags = IRQ_TYPE_NONE; + + return 0; +} + +static struct irq_host_ops i8259_host_ops = { + .match = i8259_host_match, + .map = i8259_host_map, + .unmap = i8259_host_unmap, + .xlate = i8259_host_xlate, }; -/* - * i8259_init() - * intack_addr - PCI interrupt acknowledge (real) address which will return - * the active irq from the 8259 +/**** + * i8259_init - Initialize the legacy controller + * @node: device node of the legacy PIC (can be NULL, but then, it will match + * all interrupts, so beware) + * @intack_addr: PCI interrupt acknowledge (real) address which will return + * the active irq from the 8259 */ -void __init i8259_init(unsigned long intack_addr, int offset) +void i8259_init(struct device_node *node, unsigned long intack_addr) { unsigned long flags; - int i; + /* initialize the controller */ spin_lock_irqsave(&i8259_lock, flags); - i8259_pic_irq_offset = offset; + + /* Mask all first */ + outb(0xff, 0xA1); + outb(0xff, 0x21); /* init master interrupt controller */ outb(0x11, 0x20); /* Start init sequence */ @@ -197,21 +254,36 @@ void __init i8259_init(unsigned long intack_addr, int offset) outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */ outb(0x01, 0xA1); /* Select 8086 mode */ + /* That thing is slow */ + udelay(100); + /* always read ISR */ outb(0x0B, 0x20); outb(0x0B, 0xA0); - /* Mask all interrupts */ + /* Unmask the internal cascade */ + cached_21 &= ~(1 << 2); + + /* Set interrupt masks */ outb(cached_A1, 0xA1); outb(cached_21, 0x21); spin_unlock_irqrestore(&i8259_lock, flags); - for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) - irq_desc[offset + i].chip = &i8259_pic; + /* create a legacy host */ + if (node) + i8259_node = of_node_get(node); + i8259_host = irq_alloc_host(IRQ_HOST_MAP_LEGACY, 0, &i8259_host_ops, 0); + if (i8259_host == NULL) { + printk(KERN_ERR "i8259: failed to allocate irq host !\n"); + return; + } /* reserve our resources */ - setup_irq(offset + 2, &i8259_irqaction); + /* XXX should we continue doing that ? it seems to cause problems + * with further requesting of PCI IO resources for that range... + * need to look into it. + */ request_resource(&ioport_resource, &pic1_iores); request_resource(&ioport_resource, &pic2_iores); request_resource(&ioport_resource, &pic_edgectrl_iores); @@ -219,4 +291,5 @@ void __init i8259_init(unsigned long intack_addr, int offset) if (intack_addr != 0) pci_intack = ioremap(intack_addr, 1); + printk(KERN_INFO "i8259 legacy interrupt controller initialized\n"); } diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 46801f5ec03f..70e707785d49 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -19,15 +19,18 @@ #include <linux/sched.h> #include <linux/signal.h> #include <linux/sysdev.h> +#include <linux/device.h> +#include <linux/bootmem.h> +#include <linux/spinlock.h> #include <asm/irq.h> #include <asm/io.h> +#include <asm/prom.h> #include <asm/ipic.h> -#include <asm/mpc83xx.h> #include "ipic.h" -static struct ipic p_ipic; static struct ipic * primary_ipic; +static DEFINE_SPINLOCK(ipic_lock); static struct ipic_info ipic_info[] = { [9] = { @@ -373,74 +376,220 @@ static inline void ipic_write(volatile u32 __iomem *base, unsigned int reg, u32 out_be32(base + (reg >> 2), value); } -static inline struct ipic * ipic_from_irq(unsigned int irq) +static inline struct ipic * ipic_from_irq(unsigned int virq) { return primary_ipic; } -static void ipic_enable_irq(unsigned int irq) +#define ipic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) + +static void ipic_unmask_irq(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; u32 temp; + spin_lock_irqsave(&ipic_lock, flags); + temp = ipic_read(ipic->regs, ipic_info[src].mask); temp |= (1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].mask, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -static void ipic_disable_irq(unsigned int irq) +static void ipic_mask_irq(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; u32 temp; + spin_lock_irqsave(&ipic_lock, flags); + temp = ipic_read(ipic->regs, ipic_info[src].mask); temp &= ~(1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].mask, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -static void ipic_disable_irq_and_ack(unsigned int irq) +static void ipic_ack_irq(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; u32 temp; - ipic_disable_irq(irq); + spin_lock_irqsave(&ipic_lock, flags); temp = ipic_read(ipic->regs, ipic_info[src].pend); temp |= (1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].pend, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -static void ipic_end_irq(unsigned int irq) +static void ipic_mask_irq_and_ack(unsigned int virq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - ipic_enable_irq(irq); + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + unsigned long flags; + u32 temp; + + spin_lock_irqsave(&ipic_lock, flags); + + temp = ipic_read(ipic->regs, ipic_info[src].mask); + temp &= ~(1 << (31 - ipic_info[src].bit)); + ipic_write(ipic->regs, ipic_info[src].mask, temp); + + temp = ipic_read(ipic->regs, ipic_info[src].pend); + temp |= (1 << (31 - ipic_info[src].bit)); + ipic_write(ipic->regs, ipic_info[src].pend, temp); + + spin_unlock_irqrestore(&ipic_lock, flags); } -struct hw_interrupt_type ipic = { - .typename = " IPIC ", - .enable = ipic_enable_irq, - .disable = ipic_disable_irq, - .ack = ipic_disable_irq_and_ack, - .end = ipic_end_irq, +static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); + struct irq_desc *desc = get_irq_desc(virq); + unsigned int vold, vnew, edibit; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + /* ipic supports only low assertion and high-to-low change senses + */ + if (!(flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))) { + printk(KERN_ERR "ipic: sense type 0x%x not supported\n", + flow_type); + return -EINVAL; + } + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & IRQ_TYPE_LEVEL_LOW) { + desc->status |= IRQ_LEVEL; + set_irq_handler(virq, handle_level_irq); + } else { + set_irq_handler(virq, handle_edge_irq); + } + + /* only EXT IRQ senses are programmable on ipic + * internal IRQ senses are LEVEL_LOW + */ + if (src == IPIC_IRQ_EXT0) + edibit = 15; + else + if (src >= IPIC_IRQ_EXT1 && src <= IPIC_IRQ_EXT7) + edibit = (14 - (src - IPIC_IRQ_EXT1)); + else + return (flow_type & IRQ_TYPE_LEVEL_LOW) ? 0 : -EINVAL; + + vold = ipic_read(ipic->regs, IPIC_SECNR); + if ((flow_type & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_FALLING) { + vnew = vold | (1 << edibit); + } else { + vnew = vold & ~(1 << edibit); + } + if (vold != vnew) + ipic_write(ipic->regs, IPIC_SECNR, vnew); + return 0; +} + +static struct irq_chip ipic_irq_chip = { + .typename = " IPIC ", + .unmask = ipic_unmask_irq, + .mask = ipic_mask_irq, + .mask_ack = ipic_mask_irq_and_ack, + .ack = ipic_ack_irq, + .set_type = ipic_set_irq_type, +}; + +static int ipic_host_match(struct irq_host *h, struct device_node *node) +{ + struct ipic *ipic = h->host_data; + + /* Exact match, unless ipic node is NULL */ + return ipic->of_node == NULL || ipic->of_node == node; +} + +static int ipic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct ipic *ipic = h->host_data; + struct irq_chip *chip; + + /* Default chip */ + chip = &ipic->hc_irq; + + set_irq_chip_data(virq, ipic); + set_irq_chip_and_handler(virq, chip, handle_level_irq); + + /* Set default irq type */ + set_irq_type(virq, IRQ_TYPE_NONE); + + return 0; +} + +static int ipic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + +{ + /* interrupt sense values coming from the device tree equal either + * LEVEL_LOW (low assertion) or EDGE_FALLING (high-to-low change) + */ + *out_hwirq = intspec[0]; + if (intsize > 1) + *out_flags = intspec[1]; + else + *out_flags = IRQ_TYPE_NONE; + return 0; +} + +static struct irq_host_ops ipic_host_ops = { + .match = ipic_host_match, + .map = ipic_host_map, + .xlate = ipic_host_xlate, }; -void __init ipic_init(phys_addr_t phys_addr, - unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, - unsigned int senses_count) +void __init ipic_init(struct device_node *node, + unsigned int flags) { - u32 i, temp = 0; + struct ipic *ipic; + struct resource res; + u32 temp = 0, ret; + + ipic = alloc_bootmem(sizeof(struct ipic)); + if (ipic == NULL) + return; + + memset(ipic, 0, sizeof(struct ipic)); + ipic->of_node = node ? of_node_get(node) : NULL; + + ipic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + NR_IPIC_INTS, + &ipic_host_ops, 0); + if (ipic->irqhost == NULL) { + of_node_put(node); + return; + } + + ret = of_address_to_resource(node, 0, &res); + if (ret) + return; - primary_ipic = &p_ipic; - primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE); + ipic->regs = ioremap(res.start, res.end - res.start + 1); - primary_ipic->irq_offset = irq_offset; + ipic->irqhost->host_data = ipic; + ipic->hc_irq = ipic_irq_chip; - ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0); + /* init hw */ + ipic_write(ipic->regs, IPIC_SICNR, 0x0); /* default priority scheme is grouped. If spread mode is required * configure SICFR accordingly */ @@ -453,49 +602,35 @@ void __init ipic_init(phys_addr_t phys_addr, if (flags & IPIC_SPREADMODE_MIX_B) temp |= SICFR_MPSB; - ipic_write(primary_ipic->regs, IPIC_SICNR, temp); + ipic_write(ipic->regs, IPIC_SICNR, temp); /* handle MCP route */ temp = 0; if (flags & IPIC_DISABLE_MCP_OUT) temp = SERCR_MCPR; - ipic_write(primary_ipic->regs, IPIC_SERCR, temp); + ipic_write(ipic->regs, IPIC_SERCR, temp); /* handle routing of IRQ0 to MCP */ - temp = ipic_read(primary_ipic->regs, IPIC_SEMSR); + temp = ipic_read(ipic->regs, IPIC_SEMSR); if (flags & IPIC_IRQ0_MCP) temp |= SEMSR_SIRQ0; else temp &= ~SEMSR_SIRQ0; - ipic_write(primary_ipic->regs, IPIC_SEMSR, temp); + ipic_write(ipic->regs, IPIC_SEMSR, temp); - for (i = 0 ; i < NR_IPIC_INTS ; i++) { - irq_desc[i+irq_offset].chip = &ipic; - irq_desc[i+irq_offset].status = IRQ_LEVEL; - } + primary_ipic = ipic; + irq_set_default_host(primary_ipic->irqhost); - temp = 0; - for (i = 0 ; i < senses_count ; i++) { - if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { - temp |= 1 << (15 - i); - if (i != 0) - irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; - else - irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0; - } - } - ipic_write(primary_ipic->regs, IPIC_SECNR, temp); - - printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS, - senses_count, primary_ipic->regs); + printk ("IPIC (%d IRQ sources) at %p\n", NR_IPIC_INTS, + primary_ipic->regs); } -int ipic_set_priority(unsigned int irq, unsigned int priority) +int ipic_set_priority(unsigned int virq, unsigned int priority) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); u32 temp; if (priority > 7) @@ -520,10 +655,10 @@ int ipic_set_priority(unsigned int irq, unsigned int priority) return 0; } -void ipic_set_highest_priority(unsigned int irq) +void ipic_set_highest_priority(unsigned int virq) { - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; + struct ipic *ipic = ipic_from_irq(virq); + unsigned int src = ipic_irq_to_hw(virq); u32 temp; temp = ipic_read(ipic->regs, IPIC_SICFR); @@ -537,37 +672,10 @@ void ipic_set_highest_priority(unsigned int irq) void ipic_set_default_priority(void) { - ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0); - ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1); - ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2); - ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3); - ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4); - ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5); - ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6); - ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7); - - ipic_set_priority(MPC83xx_IRQ_UART1, 0); - ipic_set_priority(MPC83xx_IRQ_UART2, 1); - ipic_set_priority(MPC83xx_IRQ_SEC2, 2); - ipic_set_priority(MPC83xx_IRQ_IIC1, 5); - ipic_set_priority(MPC83xx_IRQ_IIC2, 6); - ipic_set_priority(MPC83xx_IRQ_SPI, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0); - ipic_set_priority(MPC83xx_IRQ_PIT, 1); - ipic_set_priority(MPC83xx_IRQ_PCI1, 2); - ipic_set_priority(MPC83xx_IRQ_PCI2, 3); - ipic_set_priority(MPC83xx_IRQ_EXT0, 4); - ipic_set_priority(MPC83xx_IRQ_EXT1, 5); - ipic_set_priority(MPC83xx_IRQ_EXT2, 6); - ipic_set_priority(MPC83xx_IRQ_EXT3, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0); - ipic_set_priority(MPC83xx_IRQ_MU, 1); - ipic_set_priority(MPC83xx_IRQ_SBA, 2); - ipic_set_priority(MPC83xx_IRQ_DMA, 3); - ipic_set_priority(MPC83xx_IRQ_EXT4, 4); - ipic_set_priority(MPC83xx_IRQ_EXT5, 5); - ipic_set_priority(MPC83xx_IRQ_EXT6, 6); - ipic_set_priority(MPC83xx_IRQ_EXT7, 7); + ipic_write(primary_ipic->regs, IPIC_SIPRR_A, IPIC_SIPRR_A_DEFAULT); + ipic_write(primary_ipic->regs, IPIC_SIPRR_D, IPIC_SIPRR_D_DEFAULT); + ipic_write(primary_ipic->regs, IPIC_SMPRR_A, IPIC_SMPRR_A_DEFAULT); + ipic_write(primary_ipic->regs, IPIC_SMPRR_B, IPIC_SMPRR_B_DEFAULT); } void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq) @@ -600,17 +708,20 @@ void ipic_clear_mcp_status(u32 mask) ipic_write(primary_ipic->regs, IPIC_SERMR, mask); } -/* Return an interrupt vector or -1 if no interrupt is pending. */ -int ipic_get_irq(struct pt_regs *regs) +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int ipic_get_irq(struct pt_regs *regs) { int irq; - irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f; + BUG_ON(primary_ipic == NULL); + +#define IPIC_SIVCR_VECTOR_MASK 0x7f + irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & IPIC_SIVCR_VECTOR_MASK; if (irq == 0) /* 0 --> no irq is pending */ - irq = -1; + return NO_IRQ; - return irq; + return irq_linear_revmap(primary_ipic->irqhost, irq); } static struct sysdev_class ipic_sysclass = { diff --git a/arch/powerpc/sysdev/ipic.h b/arch/powerpc/sysdev/ipic.h index a60c9d18bb7f..c28e589877eb 100644 --- a/arch/powerpc/sysdev/ipic.h +++ b/arch/powerpc/sysdev/ipic.h @@ -15,7 +15,18 @@ #include <asm/ipic.h> -#define MPC83xx_IPIC_SIZE (0x00100) +#define NR_IPIC_INTS 128 + +/* External IRQS */ +#define IPIC_IRQ_EXT0 48 +#define IPIC_IRQ_EXT1 17 +#define IPIC_IRQ_EXT7 23 + +/* Default Priority Registers */ +#define IPIC_SIPRR_A_DEFAULT 0x05309770 +#define IPIC_SIPRR_D_DEFAULT 0x05309770 +#define IPIC_SMPRR_A_DEFAULT 0x05309770 +#define IPIC_SMPRR_B_DEFAULT 0x05309770 /* System Global Interrupt Configuration Register */ #define SICFR_IPSA 0x00010000 @@ -31,7 +42,15 @@ struct ipic { volatile u32 __iomem *regs; - unsigned int irq_offset; + + /* The remapper for this IPIC */ + struct irq_host *irqhost; + + /* The "linux" controller struct */ + struct irq_chip hc_irq; + + /* The device node of the interrupt controller */ + struct device_node *of_node; }; struct ipic_info { diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 7e469358895f..b604926401f5 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -54,6 +54,94 @@ static DEFINE_SPINLOCK(mpic_lock); #endif #endif +#ifdef CONFIG_MPIC_WEIRD +static u32 mpic_infos[][MPIC_IDX_END] = { + [0] = { /* Original OpenPIC compatible MPIC */ + MPIC_GREG_BASE, + MPIC_GREG_FEATURE_0, + MPIC_GREG_GLOBAL_CONF_0, + MPIC_GREG_VENDOR_ID, + MPIC_GREG_IPI_VECTOR_PRI_0, + MPIC_GREG_IPI_STRIDE, + MPIC_GREG_SPURIOUS, + MPIC_GREG_TIMER_FREQ, + + MPIC_TIMER_BASE, + MPIC_TIMER_STRIDE, + MPIC_TIMER_CURRENT_CNT, + MPIC_TIMER_BASE_CNT, + MPIC_TIMER_VECTOR_PRI, + MPIC_TIMER_DESTINATION, + + MPIC_CPU_BASE, + MPIC_CPU_STRIDE, + MPIC_CPU_IPI_DISPATCH_0, + MPIC_CPU_IPI_DISPATCH_STRIDE, + MPIC_CPU_CURRENT_TASK_PRI, + MPIC_CPU_WHOAMI, + MPIC_CPU_INTACK, + MPIC_CPU_EOI, + + MPIC_IRQ_BASE, + MPIC_IRQ_STRIDE, + MPIC_IRQ_VECTOR_PRI, + MPIC_VECPRI_VECTOR_MASK, + MPIC_VECPRI_POLARITY_POSITIVE, + MPIC_VECPRI_POLARITY_NEGATIVE, + MPIC_VECPRI_SENSE_LEVEL, + MPIC_VECPRI_SENSE_EDGE, + MPIC_VECPRI_POLARITY_MASK, + MPIC_VECPRI_SENSE_MASK, + MPIC_IRQ_DESTINATION + }, + [1] = { /* Tsi108/109 PIC */ + TSI108_GREG_BASE, + TSI108_GREG_FEATURE_0, + TSI108_GREG_GLOBAL_CONF_0, + TSI108_GREG_VENDOR_ID, + TSI108_GREG_IPI_VECTOR_PRI_0, + TSI108_GREG_IPI_STRIDE, + TSI108_GREG_SPURIOUS, + TSI108_GREG_TIMER_FREQ, + + TSI108_TIMER_BASE, + TSI108_TIMER_STRIDE, + TSI108_TIMER_CURRENT_CNT, + TSI108_TIMER_BASE_CNT, + TSI108_TIMER_VECTOR_PRI, + TSI108_TIMER_DESTINATION, + + TSI108_CPU_BASE, + TSI108_CPU_STRIDE, + TSI108_CPU_IPI_DISPATCH_0, + TSI108_CPU_IPI_DISPATCH_STRIDE, + TSI108_CPU_CURRENT_TASK_PRI, + TSI108_CPU_WHOAMI, + TSI108_CPU_INTACK, + TSI108_CPU_EOI, + + TSI108_IRQ_BASE, + TSI108_IRQ_STRIDE, + TSI108_IRQ_VECTOR_PRI, + TSI108_VECPRI_VECTOR_MASK, + TSI108_VECPRI_POLARITY_POSITIVE, + TSI108_VECPRI_POLARITY_NEGATIVE, + TSI108_VECPRI_SENSE_LEVEL, + TSI108_VECPRI_SENSE_EDGE, + TSI108_VECPRI_POLARITY_MASK, + TSI108_VECPRI_SENSE_MASK, + TSI108_IRQ_DESTINATION + }, +}; + +#define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name] + +#else /* CONFIG_MPIC_WEIRD */ + +#define MPIC_INFO(name) MPIC_##name + +#endif /* CONFIG_MPIC_WEIRD */ + /* * Register accessor functions */ @@ -80,7 +168,8 @@ static inline void _mpic_write(unsigned int be, volatile u32 __iomem *base, static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) { unsigned int be = (mpic->flags & MPIC_BIG_ENDIAN) != 0; - unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10); + unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + + (ipi * MPIC_INFO(GREG_IPI_STRIDE)); if (mpic->flags & MPIC_BROKEN_IPI) be = !be; @@ -89,7 +178,8 @@ static inline u32 _mpic_ipi_read(struct mpic *mpic, unsigned int ipi) static inline void _mpic_ipi_write(struct mpic *mpic, unsigned int ipi, u32 value) { - unsigned int offset = MPIC_GREG_IPI_VECTOR_PRI_0 + (ipi * 0x10); + unsigned int offset = MPIC_INFO(GREG_IPI_VECTOR_PRI_0) + + (ipi * MPIC_INFO(GREG_IPI_STRIDE)); _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->gregs, offset, value); } @@ -100,8 +190,8 @@ static inline u32 _mpic_cpu_read(struct mpic *mpic, unsigned int reg) if (mpic->flags & MPIC_PRIMARY) cpu = hard_smp_processor_id(); - - return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->cpuregs[cpu], reg); + return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, + mpic->cpuregs[cpu], reg); } static inline void _mpic_cpu_write(struct mpic *mpic, unsigned int reg, u32 value) @@ -120,7 +210,7 @@ static inline u32 _mpic_irq_read(struct mpic *mpic, unsigned int src_no, unsigne unsigned int idx = src_no & mpic->isu_mask; return _mpic_read(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], - reg + (idx * MPIC_IRQ_STRIDE)); + reg + (idx * MPIC_INFO(IRQ_STRIDE))); } static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, @@ -130,7 +220,7 @@ static inline void _mpic_irq_write(struct mpic *mpic, unsigned int src_no, unsigned int idx = src_no & mpic->isu_mask; _mpic_write(mpic->flags & MPIC_BIG_ENDIAN, mpic->isus[isu], - reg + (idx * MPIC_IRQ_STRIDE), value); + reg + (idx * MPIC_INFO(IRQ_STRIDE)), value); } #define mpic_read(b,r) _mpic_read(mpic->flags & MPIC_BIG_ENDIAN,(b),(r)) @@ -156,8 +246,8 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic) { u32 r; - mpic_write(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0, MPIC_VECPRI_MASK); - r = mpic_read(mpic->gregs, MPIC_GREG_IPI_VECTOR_PRI_0); + mpic_write(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0), MPIC_VECPRI_MASK); + r = mpic_read(mpic->gregs, MPIC_INFO(GREG_IPI_VECTOR_PRI_0)); if (r == le32_to_cpu(MPIC_VECPRI_MASK)) { printk(KERN_INFO "mpic: Detected reversed IPI registers\n"); @@ -204,7 +294,7 @@ static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source, if (fixup->base == NULL) return; - DBG("startup_ht_interrupt(%u, %u) index: %d\n", + DBG("startup_ht_interrupt(0x%x, 0x%x) index: %d\n", source, irqflags, fixup->index); spin_lock_irqsave(&mpic->fixup_lock, flags); /* Enable and configure */ @@ -227,7 +317,7 @@ static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, if (fixup->base == NULL) return; - DBG("shutdown_ht_interrupt(%u, %u)\n", source, irqflags); + DBG("shutdown_ht_interrupt(0x%x, 0x%x)\n", source, irqflags); /* Disable */ spin_lock_irqsave(&mpic->fixup_lock, flags); @@ -337,30 +427,33 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) } } +#else /* CONFIG_MPIC_BROKEN_U3 */ + +static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) +{ + return 0; +} + +static void __init mpic_scan_ht_pics(struct mpic *mpic) +{ +} + #endif /* CONFIG_MPIC_BROKEN_U3 */ +#define mpic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) + /* Find an mpic associated with a given linux interrupt */ static struct mpic *mpic_find(unsigned int irq, unsigned int *is_ipi) { - struct mpic *mpic = mpics; - - while(mpic) { - /* search IPIs first since they may override the main interrupts */ - if (irq >= mpic->ipi_offset && irq < (mpic->ipi_offset + 4)) { - if (is_ipi) - *is_ipi = 1; - return mpic; - } - if (irq >= mpic->irq_offset && - irq < (mpic->irq_offset + mpic->irq_count)) { - if (is_ipi) - *is_ipi = 0; - return mpic; - } - mpic = mpic -> next; - } - return NULL; + unsigned int src = mpic_irq_to_hw(irq); + + if (irq < NUM_ISA_INTERRUPTS) + return NULL; + if (is_ipi) + *is_ipi = (src >= MPIC_VEC_IPI_0 && src <= MPIC_VEC_IPI_3); + + return irq_desc[irq].chip_data; } /* Convert a cpu mask from logical to physical cpu numbers. */ @@ -378,29 +471,27 @@ static inline u32 mpic_physmask(u32 cpumask) /* Get the mpic structure from the IPI number */ static inline struct mpic * mpic_from_ipi(unsigned int ipi) { - return container_of(irq_desc[ipi].chip, struct mpic, hc_ipi); + return irq_desc[ipi].chip_data; } #endif /* Get the mpic structure from the irq number */ static inline struct mpic * mpic_from_irq(unsigned int irq) { - return container_of(irq_desc[irq].chip, struct mpic, hc_irq); + return irq_desc[irq].chip_data; } /* Send an EOI */ static inline void mpic_eoi(struct mpic *mpic) { - mpic_cpu_write(MPIC_CPU_EOI, 0); - (void)mpic_cpu_read(MPIC_CPU_WHOAMI); + mpic_cpu_write(MPIC_INFO(CPU_EOI), 0); + (void)mpic_cpu_read(MPIC_INFO(CPU_WHOAMI)); } #ifdef CONFIG_SMP static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { - struct mpic *mpic = dev_id; - - smp_message_recv(irq - mpic->ipi_offset, regs); + smp_message_recv(mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0, regs); return IRQ_HANDLED; } #endif /* CONFIG_SMP */ @@ -410,63 +501,36 @@ static irqreturn_t mpic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) */ -static void mpic_enable_irq(unsigned int irq) +static void mpic_unmask_irq(unsigned int irq) { unsigned int loops = 100000; struct mpic *mpic = mpic_from_irq(irq); - unsigned int src = irq - mpic->irq_offset; + unsigned int src = mpic_irq_to_hw(irq); DBG("%p: %s: enable_irq: %d (src %d)\n", mpic, mpic->name, irq, src); - mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, - mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), + mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & ~MPIC_VECPRI_MASK); - /* make sure mask gets to controller before we return to user */ do { if (!loops--) { printk(KERN_ERR "mpic_enable_irq timeout\n"); break; } - } while(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK); - -#ifdef CONFIG_MPIC_BROKEN_U3 - if (mpic->flags & MPIC_BROKEN_U3) { - unsigned int src = irq - mpic->irq_offset; - if (mpic_is_ht_interrupt(mpic, src) && - (irq_desc[irq].status & IRQ_LEVEL)) - mpic_ht_end_irq(mpic, src); - } -#endif /* CONFIG_MPIC_BROKEN_U3 */ + } while(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK); } -static unsigned int mpic_startup_irq(unsigned int irq) -{ -#ifdef CONFIG_MPIC_BROKEN_U3 - struct mpic *mpic = mpic_from_irq(irq); - unsigned int src = irq - mpic->irq_offset; -#endif /* CONFIG_MPIC_BROKEN_U3 */ - - mpic_enable_irq(irq); - -#ifdef CONFIG_MPIC_BROKEN_U3 - if (mpic_is_ht_interrupt(mpic, src)) - mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); -#endif /* CONFIG_MPIC_BROKEN_U3 */ - - return 0; -} - -static void mpic_disable_irq(unsigned int irq) +static void mpic_mask_irq(unsigned int irq) { unsigned int loops = 100000; struct mpic *mpic = mpic_from_irq(irq); - unsigned int src = irq - mpic->irq_offset; + unsigned int src = mpic_irq_to_hw(irq); DBG("%s: disable_irq: %d (src %d)\n", mpic->name, irq, src); - mpic_irq_write(src, MPIC_IRQ_VECTOR_PRI, - mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) | + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), + mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) | MPIC_VECPRI_MASK); /* make sure mask gets to controller before we return to user */ @@ -475,26 +539,61 @@ static void mpic_disable_irq(unsigned int irq) printk(KERN_ERR "mpic_enable_irq timeout\n"); break; } - } while(!(mpic_irq_read(src, MPIC_IRQ_VECTOR_PRI) & MPIC_VECPRI_MASK)); + } while(!(mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & MPIC_VECPRI_MASK)); } -static void mpic_shutdown_irq(unsigned int irq) +static void mpic_end_irq(unsigned int irq) { + struct mpic *mpic = mpic_from_irq(irq); + +#ifdef DEBUG_IRQ + DBG("%s: end_irq: %d\n", mpic->name, irq); +#endif + /* We always EOI on end_irq() even for edge interrupts since that + * should only lower the priority, the MPIC should have properly + * latched another edge interrupt coming in anyway + */ + + mpic_eoi(mpic); +} + #ifdef CONFIG_MPIC_BROKEN_U3 + +static void mpic_unmask_ht_irq(unsigned int irq) +{ struct mpic *mpic = mpic_from_irq(irq); - unsigned int src = irq - mpic->irq_offset; + unsigned int src = mpic_irq_to_hw(irq); - if (mpic_is_ht_interrupt(mpic, src)) - mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status); + mpic_unmask_irq(irq); -#endif /* CONFIG_MPIC_BROKEN_U3 */ + if (irq_desc[irq].status & IRQ_LEVEL) + mpic_ht_end_irq(mpic, src); +} - mpic_disable_irq(irq); +static unsigned int mpic_startup_ht_irq(unsigned int irq) +{ + struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = mpic_irq_to_hw(irq); + + mpic_unmask_irq(irq); + mpic_startup_ht_interrupt(mpic, src, irq_desc[irq].status); + + return 0; } -static void mpic_end_irq(unsigned int irq) +static void mpic_shutdown_ht_irq(unsigned int irq) +{ + struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = mpic_irq_to_hw(irq); + + mpic_shutdown_ht_interrupt(mpic, src, irq_desc[irq].status); + mpic_mask_irq(irq); +} + +static void mpic_end_ht_irq(unsigned int irq) { struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = mpic_irq_to_hw(irq); #ifdef DEBUG_IRQ DBG("%s: end_irq: %d\n", mpic->name, irq); @@ -504,30 +603,24 @@ static void mpic_end_irq(unsigned int irq) * latched another edge interrupt coming in anyway */ -#ifdef CONFIG_MPIC_BROKEN_U3 - if (mpic->flags & MPIC_BROKEN_U3) { - unsigned int src = irq - mpic->irq_offset; - if (mpic_is_ht_interrupt(mpic, src) && - (irq_desc[irq].status & IRQ_LEVEL)) - mpic_ht_end_irq(mpic, src); - } -#endif /* CONFIG_MPIC_BROKEN_U3 */ - + if (irq_desc[irq].status & IRQ_LEVEL) + mpic_ht_end_irq(mpic, src); mpic_eoi(mpic); } +#endif /* !CONFIG_MPIC_BROKEN_U3 */ #ifdef CONFIG_SMP -static void mpic_enable_ipi(unsigned int irq) +static void mpic_unmask_ipi(unsigned int irq) { struct mpic *mpic = mpic_from_ipi(irq); - unsigned int src = irq - mpic->ipi_offset; + unsigned int src = mpic_irq_to_hw(irq) - MPIC_VEC_IPI_0; DBG("%s: enable_ipi: %d (ipi %d)\n", mpic->name, irq, src); mpic_ipi_write(src, mpic_ipi_read(src) & ~MPIC_VECPRI_MASK); } -static void mpic_disable_ipi(unsigned int irq) +static void mpic_mask_ipi(unsigned int irq) { /* NEVER disable an IPI... that's just plain wrong! */ } @@ -551,29 +644,211 @@ static void mpic_end_ipi(unsigned int irq) static void mpic_set_affinity(unsigned int irq, cpumask_t cpumask) { struct mpic *mpic = mpic_from_irq(irq); + unsigned int src = mpic_irq_to_hw(irq); cpumask_t tmp; cpus_and(tmp, cpumask, cpu_online_map); - mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_DESTINATION, + mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), mpic_physmask(cpus_addr(tmp)[0])); } +static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type) +{ + /* Now convert sense value */ + switch(type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + return MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE); + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + return MPIC_INFO(VECPRI_SENSE_EDGE) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE); + case IRQ_TYPE_LEVEL_HIGH: + return MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_POSITIVE); + case IRQ_TYPE_LEVEL_LOW: + default: + return MPIC_INFO(VECPRI_SENSE_LEVEL) | + MPIC_INFO(VECPRI_POLARITY_NEGATIVE); + } +} + +static int mpic_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + struct mpic *mpic = mpic_from_irq(virq); + unsigned int src = mpic_irq_to_hw(virq); + struct irq_desc *desc = get_irq_desc(virq); + unsigned int vecpri, vold, vnew; + + DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n", + mpic, virq, src, flow_type); + + if (src >= mpic->irq_count) + return -EINVAL; + + if (flow_type == IRQ_TYPE_NONE) + if (mpic->senses && src < mpic->senses_count) + flow_type = mpic->senses[src]; + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) + desc->status |= IRQ_LEVEL; + + if (mpic_is_ht_interrupt(mpic, src)) + vecpri = MPIC_VECPRI_POLARITY_POSITIVE | + MPIC_VECPRI_SENSE_EDGE; + else + vecpri = mpic_type_to_vecpri(mpic, flow_type); + + vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); + vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) | + MPIC_INFO(VECPRI_SENSE_MASK)); + vnew |= vecpri; + if (vold != vnew) + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), vnew); + + return 0; +} + +static struct irq_chip mpic_irq_chip = { + .mask = mpic_mask_irq, + .unmask = mpic_unmask_irq, + .eoi = mpic_end_irq, + .set_type = mpic_set_irq_type, +}; + +#ifdef CONFIG_SMP +static struct irq_chip mpic_ipi_chip = { + .mask = mpic_mask_ipi, + .unmask = mpic_unmask_ipi, + .eoi = mpic_end_ipi, +}; +#endif /* CONFIG_SMP */ + +#ifdef CONFIG_MPIC_BROKEN_U3 +static struct irq_chip mpic_irq_ht_chip = { + .startup = mpic_startup_ht_irq, + .shutdown = mpic_shutdown_ht_irq, + .mask = mpic_mask_irq, + .unmask = mpic_unmask_ht_irq, + .eoi = mpic_end_ht_irq, + .set_type = mpic_set_irq_type, +}; +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + +static int mpic_host_match(struct irq_host *h, struct device_node *node) +{ + struct mpic *mpic = h->host_data; + + /* Exact match, unless mpic node is NULL */ + return mpic->of_node == NULL || mpic->of_node == node; +} + +static int mpic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct mpic *mpic = h->host_data; + struct irq_chip *chip; + + DBG("mpic: map virq %d, hwirq 0x%lx\n", virq, hw); + + if (hw == MPIC_VEC_SPURRIOUS) + return -EINVAL; + +#ifdef CONFIG_SMP + else if (hw >= MPIC_VEC_IPI_0) { + WARN_ON(!(mpic->flags & MPIC_PRIMARY)); + + DBG("mpic: mapping as IPI\n"); + set_irq_chip_data(virq, mpic); + set_irq_chip_and_handler(virq, &mpic->hc_ipi, + handle_percpu_irq); + return 0; + } +#endif /* CONFIG_SMP */ + + if (hw >= mpic->irq_count) + return -EINVAL; + + /* Default chip */ + chip = &mpic->hc_irq; + +#ifdef CONFIG_MPIC_BROKEN_U3 + /* Check for HT interrupts, override vecpri */ + if (mpic_is_ht_interrupt(mpic, hw)) + chip = &mpic->hc_ht_irq; +#endif /* CONFIG_MPIC_BROKEN_U3 */ + + DBG("mpic: mapping to irq chip @%p\n", chip); + + set_irq_chip_data(virq, mpic); + set_irq_chip_and_handler(virq, chip, handle_fasteoi_irq); + + /* Set default irq type */ + set_irq_type(virq, IRQ_TYPE_NONE); + + return 0; +} + +static int mpic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + +{ + static unsigned char map_mpic_senses[4] = { + IRQ_TYPE_EDGE_RISING, + IRQ_TYPE_LEVEL_LOW, + IRQ_TYPE_LEVEL_HIGH, + IRQ_TYPE_EDGE_FALLING, + }; + + *out_hwirq = intspec[0]; + if (intsize > 1) { + u32 mask = 0x3; + + /* Apple invented a new race of encoding on machines with + * an HT APIC. They encode, among others, the index within + * the HT APIC. We don't care about it here since thankfully, + * it appears that they have the APIC already properly + * configured, and thus our current fixup code that reads the + * APIC config works fine. However, we still need to mask out + * bits in the specifier to make sure we only get bit 0 which + * is the level/edge bit (the only sense bit exposed by Apple), + * as their bit 1 means something else. + */ + if (machine_is(powermac)) + mask = 0x1; + *out_flags = map_mpic_senses[intspec[1] & mask]; + } else + *out_flags = IRQ_TYPE_NONE; + + DBG("mpic: xlate (%d cells: 0x%08x 0x%08x) to line 0x%lx sense 0x%x\n", + intsize, intspec[0], intspec[1], *out_hwirq, *out_flags); + + return 0; +} + +static struct irq_host_ops mpic_host_ops = { + .match = mpic_host_match, + .map = mpic_host_map, + .xlate = mpic_host_xlate, +}; /* * Exported functions */ - -struct mpic * __init mpic_alloc(unsigned long phys_addr, +struct mpic * __init mpic_alloc(struct device_node *node, + unsigned long phys_addr, unsigned int flags, unsigned int isu_size, - unsigned int irq_offset, unsigned int irq_count, - unsigned int ipi_offset, - unsigned char *senses, - unsigned int senses_count, const char *name) { struct mpic *mpic; @@ -585,45 +860,55 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, if (mpic == NULL) return NULL; - memset(mpic, 0, sizeof(struct mpic)); mpic->name = name; + mpic->of_node = node ? of_node_get(node) : NULL; + mpic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, 256, + &mpic_host_ops, + MPIC_VEC_SPURRIOUS); + if (mpic->irqhost == NULL) { + of_node_put(node); + return NULL; + } + + mpic->irqhost->host_data = mpic; + mpic->hc_irq = mpic_irq_chip; mpic->hc_irq.typename = name; - mpic->hc_irq.startup = mpic_startup_irq; - mpic->hc_irq.shutdown = mpic_shutdown_irq; - mpic->hc_irq.enable = mpic_enable_irq; - mpic->hc_irq.disable = mpic_disable_irq; - mpic->hc_irq.end = mpic_end_irq; if (flags & MPIC_PRIMARY) mpic->hc_irq.set_affinity = mpic_set_affinity; +#ifdef CONFIG_MPIC_BROKEN_U3 + mpic->hc_ht_irq = mpic_irq_ht_chip; + mpic->hc_ht_irq.typename = name; + if (flags & MPIC_PRIMARY) + mpic->hc_ht_irq.set_affinity = mpic_set_affinity; +#endif /* CONFIG_MPIC_BROKEN_U3 */ #ifdef CONFIG_SMP + mpic->hc_ipi = mpic_ipi_chip; mpic->hc_ipi.typename = name; - mpic->hc_ipi.enable = mpic_enable_ipi; - mpic->hc_ipi.disable = mpic_disable_ipi; - mpic->hc_ipi.end = mpic_end_ipi; #endif /* CONFIG_SMP */ mpic->flags = flags; mpic->isu_size = isu_size; - mpic->irq_offset = irq_offset; mpic->irq_count = irq_count; - mpic->ipi_offset = ipi_offset; mpic->num_sources = 0; /* so far */ - mpic->senses = senses; - mpic->senses_count = senses_count; + +#ifdef CONFIG_MPIC_WEIRD + mpic->hw_set = mpic_infos[MPIC_GET_REGSET(flags)]; +#endif /* Map the global registers */ - mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000); - mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2); + mpic->gregs = ioremap(phys_addr + MPIC_INFO(GREG_BASE), 0x1000); + mpic->tmregs = mpic->gregs + + ((MPIC_INFO(TIMER_BASE) - MPIC_INFO(GREG_BASE)) >> 2); BUG_ON(mpic->gregs == NULL); /* Reset */ if (flags & MPIC_WANTS_RESET) { - mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0, - mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) + mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), + mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) | MPIC_GREG_GCONF_RESET); - while( mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) + while( mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) & MPIC_GREG_GCONF_RESET) mb(); } @@ -632,7 +917,7 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, * MPICs, num sources as well. On ISU MPICs, sources are counted * as ISUs are added */ - reg = mpic_read(mpic->gregs, MPIC_GREG_FEATURE_0); + reg = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); mpic->num_cpus = ((reg & MPIC_GREG_FEATURE_LAST_CPU_MASK) >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1; if (isu_size == 0) @@ -641,16 +926,16 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, /* Map the per-CPU registers */ for (i = 0; i < mpic->num_cpus; i++) { - mpic->cpuregs[i] = ioremap(phys_addr + MPIC_CPU_BASE + - i * MPIC_CPU_STRIDE, 0x1000); + mpic->cpuregs[i] = ioremap(phys_addr + MPIC_INFO(CPU_BASE) + + i * MPIC_INFO(CPU_STRIDE), 0x1000); BUG_ON(mpic->cpuregs[i] == NULL); } /* Initialize main ISU if none provided */ if (mpic->isu_size == 0) { mpic->isu_size = mpic->num_sources; - mpic->isus[0] = ioremap(phys_addr + MPIC_IRQ_BASE, - MPIC_IRQ_STRIDE * mpic->isu_size); + mpic->isus[0] = ioremap(phys_addr + MPIC_INFO(IRQ_BASE), + MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); BUG_ON(mpic->isus[0] == NULL); } mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); @@ -679,8 +964,10 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, mpic->next = mpics; mpics = mpic; - if (flags & MPIC_PRIMARY) + if (flags & MPIC_PRIMARY) { mpic_primary = mpic; + irq_set_default_host(mpic->irqhost); + } return mpic; } @@ -692,31 +979,16 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, BUG_ON(isu_num >= MPIC_MAX_ISU); - mpic->isus[isu_num] = ioremap(phys_addr, MPIC_IRQ_STRIDE * mpic->isu_size); + mpic->isus[isu_num] = ioremap(phys_addr, + MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); if ((isu_first + mpic->isu_size) > mpic->num_sources) mpic->num_sources = isu_first + mpic->isu_size; } -void __init mpic_setup_cascade(unsigned int irq, mpic_cascade_t handler, - void *data) +void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count) { - struct mpic *mpic = mpic_find(irq, NULL); - unsigned long flags; - - /* Synchronization here is a bit dodgy, so don't try to replace cascade - * interrupts on the fly too often ... but normally it's set up at boot. - */ - spin_lock_irqsave(&mpic_lock, flags); - if (mpic->cascade) - mpic_disable_irq(mpic->cascade_vec + mpic->irq_offset); - mpic->cascade = NULL; - wmb(); - mpic->cascade_vec = irq - mpic->irq_offset; - mpic->cascade_data = data; - wmb(); - mpic->cascade = handler; - mpic_enable_irq(irq); - spin_unlock_irqrestore(&mpic_lock, flags); + mpic->senses = senses; + mpic->senses_count = count; } void __init mpic_init(struct mpic *mpic) @@ -724,18 +996,25 @@ void __init mpic_init(struct mpic *mpic) int i; BUG_ON(mpic->num_sources == 0); + WARN_ON(mpic->num_sources > MPIC_VEC_IPI_0); + + /* Sanitize source count */ + if (mpic->num_sources > MPIC_VEC_IPI_0) + mpic->num_sources = MPIC_VEC_IPI_0; printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources); /* Set current processor priority to max */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); /* Initialize timers: just disable them all */ for (i = 0; i < 4; i++) { mpic_write(mpic->tmregs, - i * MPIC_TIMER_STRIDE + MPIC_TIMER_DESTINATION, 0); + i * MPIC_INFO(TIMER_STRIDE) + + MPIC_INFO(TIMER_DESTINATION), 0); mpic_write(mpic->tmregs, - i * MPIC_TIMER_STRIDE + MPIC_TIMER_VECTOR_PRI, + i * MPIC_INFO(TIMER_STRIDE) + + MPIC_INFO(TIMER_VECTOR_PRI), MPIC_VECPRI_MASK | (MPIC_VEC_TIMER_0 + i)); } @@ -747,85 +1026,39 @@ void __init mpic_init(struct mpic *mpic) MPIC_VECPRI_MASK | (10 << MPIC_VECPRI_PRIORITY_SHIFT) | (MPIC_VEC_IPI_0 + i)); -#ifdef CONFIG_SMP - if (!(mpic->flags & MPIC_PRIMARY)) - continue; - irq_desc[mpic->ipi_offset+i].status |= IRQ_PER_CPU; - irq_desc[mpic->ipi_offset+i].chip = &mpic->hc_ipi; -#endif /* CONFIG_SMP */ } /* Initialize interrupt sources */ if (mpic->irq_count == 0) mpic->irq_count = mpic->num_sources; -#ifdef CONFIG_MPIC_BROKEN_U3 /* Do the HT PIC fixups on U3 broken mpic */ DBG("MPIC flags: %x\n", mpic->flags); if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY)) - mpic_scan_ht_pics(mpic); -#endif /* CONFIG_MPIC_BROKEN_U3 */ + mpic_scan_ht_pics(mpic); for (i = 0; i < mpic->num_sources; i++) { /* start with vector = source number, and masked */ - u32 vecpri = MPIC_VECPRI_MASK | i | (8 << MPIC_VECPRI_PRIORITY_SHIFT); - int level = 0; + u32 vecpri = MPIC_VECPRI_MASK | i | + (8 << MPIC_VECPRI_PRIORITY_SHIFT); - /* if it's an IPI, we skip it */ - if ((mpic->irq_offset + i) >= (mpic->ipi_offset + i) && - (mpic->irq_offset + i) < (mpic->ipi_offset + i + 4)) - continue; - - /* do senses munging */ - if (mpic->senses && i < mpic->senses_count) { - if (mpic->senses[i] & IRQ_SENSE_LEVEL) - vecpri |= MPIC_VECPRI_SENSE_LEVEL; - if (mpic->senses[i] & IRQ_POLARITY_POSITIVE) - vecpri |= MPIC_VECPRI_POLARITY_POSITIVE; - } else - vecpri |= MPIC_VECPRI_SENSE_LEVEL; - - /* remember if it was a level interrupts */ - level = (vecpri & MPIC_VECPRI_SENSE_LEVEL); - - /* deal with broken U3 */ - if (mpic->flags & MPIC_BROKEN_U3) { -#ifdef CONFIG_MPIC_BROKEN_U3 - if (mpic_is_ht_interrupt(mpic, i)) { - vecpri &= ~(MPIC_VECPRI_SENSE_MASK | - MPIC_VECPRI_POLARITY_MASK); - vecpri |= MPIC_VECPRI_POLARITY_POSITIVE; - } -#else - printk(KERN_ERR "mpic: BROKEN_U3 set, but CONFIG doesn't match\n"); -#endif - } - - DBG("setup source %d, vecpri: %08x, level: %d\n", i, vecpri, - (level != 0)); - /* init hw */ - mpic_irq_write(i, MPIC_IRQ_VECTOR_PRI, vecpri); - mpic_irq_write(i, MPIC_IRQ_DESTINATION, + mpic_irq_write(i, MPIC_INFO(IRQ_VECTOR_PRI), vecpri); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), 1 << hard_smp_processor_id()); - - /* init linux descriptors */ - if (i < mpic->irq_count) { - irq_desc[mpic->irq_offset+i].status = level ? IRQ_LEVEL : 0; - irq_desc[mpic->irq_offset+i].chip = &mpic->hc_irq; - } } /* Init spurrious vector */ - mpic_write(mpic->gregs, MPIC_GREG_SPURIOUS, MPIC_VEC_SPURRIOUS); + mpic_write(mpic->gregs, MPIC_INFO(GREG_SPURIOUS), MPIC_VEC_SPURRIOUS); - /* Disable 8259 passthrough */ - mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0, - mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_0) - | MPIC_GREG_GCONF_8259_PTHROU_DIS); + /* Disable 8259 passthrough, if supported */ + if (!(mpic->flags & MPIC_NO_PTHROU_DIS)) + mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), + mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) + | MPIC_GREG_GCONF_8259_PTHROU_DIS); /* Set current processor priority to 0 */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0); } void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) @@ -840,33 +1073,37 @@ void __init mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio) void __init mpic_set_serial_int(struct mpic *mpic, int enable) { + unsigned long flags; u32 v; + spin_lock_irqsave(&mpic_lock, flags); v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); if (enable) v |= MPIC_GREG_GLOBAL_CONF_1_SIE; else v &= ~MPIC_GREG_GLOBAL_CONF_1_SIE; mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); + spin_unlock_irqrestore(&mpic_lock, flags); } void mpic_irq_set_priority(unsigned int irq, unsigned int pri) { int is_ipi; struct mpic *mpic = mpic_find(irq, &is_ipi); + unsigned int src = mpic_irq_to_hw(irq); unsigned long flags; u32 reg; spin_lock_irqsave(&mpic_lock, flags); if (is_ipi) { - reg = mpic_ipi_read(irq - mpic->ipi_offset) & + reg = mpic_ipi_read(src - MPIC_VEC_IPI_0) & ~MPIC_VECPRI_PRIORITY_MASK; - mpic_ipi_write(irq - mpic->ipi_offset, + mpic_ipi_write(src - MPIC_VEC_IPI_0, reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } else { - reg = mpic_irq_read(irq - mpic->irq_offset,MPIC_IRQ_VECTOR_PRI) + reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)) & ~MPIC_VECPRI_PRIORITY_MASK; - mpic_irq_write(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI, + mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } spin_unlock_irqrestore(&mpic_lock, flags); @@ -876,14 +1113,15 @@ unsigned int mpic_irq_get_priority(unsigned int irq) { int is_ipi; struct mpic *mpic = mpic_find(irq, &is_ipi); + unsigned int src = mpic_irq_to_hw(irq); unsigned long flags; u32 reg; spin_lock_irqsave(&mpic_lock, flags); if (is_ipi) - reg = mpic_ipi_read(irq - mpic->ipi_offset); + reg = mpic_ipi_read(src = MPIC_VEC_IPI_0); else - reg = mpic_irq_read(irq - mpic->irq_offset, MPIC_IRQ_VECTOR_PRI); + reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); spin_unlock_irqrestore(&mpic_lock, flags); return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT; } @@ -909,12 +1147,12 @@ void mpic_setup_this_cpu(void) */ if (distribute_irqs) { for (i = 0; i < mpic->num_sources ; i++) - mpic_irq_write(i, MPIC_IRQ_DESTINATION, - mpic_irq_read(i, MPIC_IRQ_DESTINATION) | msk); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), + mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk); } /* Set current processor priority to 0 */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0); spin_unlock_irqrestore(&mpic_lock, flags); #endif /* CONFIG_SMP */ @@ -924,7 +1162,7 @@ int mpic_cpu_get_priority(void) { struct mpic *mpic = mpic_primary; - return mpic_cpu_read(MPIC_CPU_CURRENT_TASK_PRI); + return mpic_cpu_read(MPIC_INFO(CPU_CURRENT_TASK_PRI)); } void mpic_cpu_set_priority(int prio) @@ -932,7 +1170,7 @@ void mpic_cpu_set_priority(int prio) struct mpic *mpic = mpic_primary; prio &= MPIC_CPU_TASKPRI_MASK; - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, prio); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), prio); } /* @@ -954,11 +1192,11 @@ void mpic_teardown_this_cpu(int secondary) /* let the mpic know we don't want intrs. */ for (i = 0; i < mpic->num_sources ; i++) - mpic_irq_write(i, MPIC_IRQ_DESTINATION, - mpic_irq_read(i, MPIC_IRQ_DESTINATION) & ~msk); + mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION), + mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) & ~msk); /* Set current processor priority to max */ - mpic_cpu_write(MPIC_CPU_CURRENT_TASK_PRI, 0xf); + mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0xf); spin_unlock_irqrestore(&mpic_lock, flags); } @@ -974,41 +1212,25 @@ void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask) DBG("%s: send_ipi(ipi_no: %d)\n", mpic->name, ipi_no); #endif - mpic_cpu_write(MPIC_CPU_IPI_DISPATCH_0 + ipi_no * 0x10, + mpic_cpu_write(MPIC_INFO(CPU_IPI_DISPATCH_0) + + ipi_no * MPIC_INFO(CPU_IPI_DISPATCH_STRIDE), mpic_physmask(cpu_mask & cpus_addr(cpu_online_map)[0])); } -int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs) +unsigned int mpic_get_one_irq(struct mpic *mpic, struct pt_regs *regs) { - u32 irq; + u32 src; - irq = mpic_cpu_read(MPIC_CPU_INTACK) & MPIC_VECPRI_VECTOR_MASK; -#ifdef DEBUG_LOW - DBG("%s: get_one_irq(): %d\n", mpic->name, irq); -#endif - if (mpic->cascade && irq == mpic->cascade_vec) { + src = mpic_cpu_read(MPIC_INFO(CPU_INTACK)) & MPIC_INFO(VECPRI_VECTOR_MASK); #ifdef DEBUG_LOW - DBG("%s: cascading ...\n", mpic->name); -#endif - irq = mpic->cascade(regs, mpic->cascade_data); - mpic_eoi(mpic); - return irq; - } - if (unlikely(irq == MPIC_VEC_SPURRIOUS)) - return -1; - if (irq < MPIC_VEC_IPI_0) { -#ifdef DEBUG_IRQ - DBG("%s: irq %d\n", mpic->name, irq + mpic->irq_offset); -#endif - return irq + mpic->irq_offset; - } -#ifdef DEBUG_IPI - DBG("%s: ipi %d !\n", mpic->name, irq - MPIC_VEC_IPI_0); + DBG("%s: get_one_irq(): %d\n", mpic->name, src); #endif - return irq - MPIC_VEC_IPI_0 + mpic->ipi_offset; + if (unlikely(src == MPIC_VEC_SPURRIOUS)) + return NO_IRQ; + return irq_linear_revmap(mpic->irqhost, src); } -int mpic_get_irq(struct pt_regs *regs) +unsigned int mpic_get_irq(struct pt_regs *regs) { struct mpic *mpic = mpic_primary; @@ -1022,25 +1244,27 @@ int mpic_get_irq(struct pt_regs *regs) void mpic_request_ipis(void) { struct mpic *mpic = mpic_primary; - + int i; + static char *ipi_names[] = { + "IPI0 (call function)", + "IPI1 (reschedule)", + "IPI2 (unused)", + "IPI3 (debugger break)", + }; BUG_ON(mpic == NULL); - - printk("requesting IPIs ... \n"); - /* - * IPIs are marked IRQF_DISABLED as they must run with irqs - * disabled - */ - request_irq(mpic->ipi_offset+0, mpic_ipi_action, IRQF_DISABLED, - "IPI0 (call function)", mpic); - request_irq(mpic->ipi_offset+1, mpic_ipi_action, IRQF_DISABLED, - "IPI1 (reschedule)", mpic); - request_irq(mpic->ipi_offset+2, mpic_ipi_action, IRQF_DISABLED, - "IPI2 (unused)", mpic); - request_irq(mpic->ipi_offset+3, mpic_ipi_action, IRQF_DISABLED, - "IPI3 (debugger break)", mpic); - - printk("IPIs requested... \n"); + printk(KERN_INFO "mpic: requesting IPIs ... \n"); + + for (i = 0; i < 4; i++) { + unsigned int vipi = irq_create_mapping(mpic->irqhost, + MPIC_VEC_IPI_0 + i); + if (vipi == NO_IRQ) { + printk(KERN_ERR "Failed to map IPI %d\n", i); + break; + } + request_irq(vipi, mpic_ipi_action, IRQF_DISABLED, + ipi_names[i], mpic); + } } void smp_mpic_message_pass(int target, int msg) diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 26a0cc820cde..f3038461d4c0 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -93,13 +93,15 @@ static int __init tsi108_eth_of_init(void) goto err; r[1].name = "tx"; - r[1].start = np->intrs[0].line; - r[1].end = np->intrs[0].line; + r[1].start = irq_of_parse_and_map(np, 0); + r[1].end = irq_of_parse_and_map(np, 0); r[1].flags = IORESOURCE_IRQ; + DBG("%s: name:start->end = %s:0x%lx-> 0x%lx\n", + __FUNCTION__,r[1].name, r[1].start, r[1].end); tsi_eth_dev = platform_device_register_simple("tsi-ethernet", i, &r[0], - np->n_intrs + 1); + 1); if (IS_ERR(tsi_eth_dev)) { ret = PTR_ERR(tsi_eth_dev); @@ -127,7 +129,7 @@ static int __init tsi108_eth_of_init(void) tsi_eth_data.regs = r[0].start; tsi_eth_data.phyregs = res.start; tsi_eth_data.phy = *phy_id; - tsi_eth_data.irq_num = np->intrs[0].line; + tsi_eth_data.irq_num = irq_of_parse_and_map(np, 0); of_node_put(phy); ret = platform_device_add_data(tsi_eth_dev, &tsi_eth_data, diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 3265d54c82ed..2ab06ed3ae73 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -26,7 +26,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> - #include <asm/byteorder.h> #include <asm/io.h> #include <asm/irq.h> @@ -228,7 +227,7 @@ int __init tsi108_setup_pci(struct device_node *dev) (hose)->ops = &tsi108_direct_pci_ops; - printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08lx. " + printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " "Firmware bus number: %d->%d\n", rsrc.start, hose->first_busno, hose->last_busno); @@ -278,7 +277,7 @@ static void init_pci_source(void) mb(); } -static inline int get_pci_source(void) +static inline unsigned int get_pci_source(void) { u_int temp = 0; int irq = -1; @@ -371,12 +370,12 @@ static void tsi108_pci_irq_end(u_int irq) * Interrupt controller descriptor for cascaded PCI interrupt controller. */ -struct hw_interrupt_type tsi108_pci_irq = { +static struct irq_chip tsi108_pci_irq = { .typename = "tsi108_PCI_int", - .enable = tsi108_pci_irq_enable, - .disable = tsi108_pci_irq_disable, + .mask = tsi108_pci_irq_disable, .ack = tsi108_pci_irq_ack, .end = tsi108_pci_irq_end, + .unmask = tsi108_pci_irq_enable, }; /* @@ -399,14 +398,18 @@ void __init tsi108_pci_int_init(void) DBG("Tsi108_pci_int_init: initializing PCI interrupts\n"); for (i = 0; i < NUM_PCI_IRQS; i++) { - irq_desc[i + IRQ_PCI_INTAD_BASE].handler = &tsi108_pci_irq; + irq_desc[i + IRQ_PCI_INTAD_BASE].chip = &tsi108_pci_irq; irq_desc[i + IRQ_PCI_INTAD_BASE].status |= IRQ_LEVEL; } init_pci_source(); } -int tsi108_irq_cascade(struct pt_regs *regs, void *unused) +void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs) { - return get_pci_source(); + unsigned int cascade_irq = get_pci_source(); + if (cascade_irq != NO_IRQ) + generic_handle_irq(cascade_irq, regs); + desc->chip->eoi(irq); } |