diff options
Diffstat (limited to 'drivers/gpu/drm/panel')
| -rw-r--r-- | drivers/gpu/drm/panel/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/Makefile | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c | 139 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c | 101 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 154 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-s6e63m0.h | 13 |
6 files changed, 367 insertions, 65 deletions
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index 8d97d07c5871..b9dbedf8f15e 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -324,13 +324,30 @@ config DRM_PANEL_SAMSUNG_S6E63J0X03 select VIDEOMODE_HELPERS config DRM_PANEL_SAMSUNG_S6E63M0 - tristate "Samsung S6E63M0 RGB/SPI panel" + tristate "Samsung S6E63M0 RGB panel" depends on OF - depends on SPI depends on BACKLIGHT_CLASS_DEVICE help Say Y here if you want to enable support for Samsung S6E63M0 - AMOLED LCD panel. + AMOLED LCD panel. This panel can be accessed using SPI or + DSI. + +config DRM_PANEL_SAMSUNG_S6E63M0_SPI + tristate "Samsung S6E63M0 RGB SPI interface" + depends on SPI + depends on DRM_PANEL_SAMSUNG_S6E63M0 + default DRM_PANEL_SAMSUNG_S6E63M0 + help + Say Y here if you want to be able to access the Samsung + S6E63M0 panel using SPI. + +config DRM_PANEL_SAMSUNG_S6E63M0_DSI + tristate "Samsung S6E63M0 RGB DSI interface" + depends on DRM_MIPI_DSI + depends on DRM_PANEL_SAMSUNG_S6E63M0 + help + Say Y here if you want to be able to access the Samsung + S6E63M0 panel using DSI. config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 15a4e7752951..2ba560bca61d 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -34,6 +34,8 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03) += panel-samsung-s6e63j0x03.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0) += panel-samsung-s6e63m0.o +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_SPI) += panel-samsung-s6e63m0-spi.o +obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E63M0_DSI) += panel-samsung-s6e63m0-dsi.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01) += panel-samsung-s6e88a0-ams452ef01.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c new file mode 100644 index 000000000000..eec74c10ddda --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c @@ -0,0 +1,139 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DSI interface to the Samsung S6E63M0 panel. + * (C) 2019 Linus Walleij + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/of_device.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_print.h> + +#include "panel-samsung-s6e63m0.h" + +#define MCS_GLOBAL_PARAM 0xb0 +#define S6E63M0_DSI_MAX_CHUNK 15 /* CMD + 15 bytes max */ + +static int s6e63m0_dsi_dcs_read(struct device *dev, const u8 cmd, u8 *data) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); + int ret; + + ret = mipi_dsi_dcs_read(dsi, cmd, data, 1); + if (ret < 0) { + dev_err(dev, "could not read DCS CMD %02x\n", cmd); + return ret; + } + + dev_info(dev, "DSI read CMD %02x = %02x\n", cmd, *data); + + return 0; +} + +static int s6e63m0_dsi_dcs_write(struct device *dev, const u8 *data, size_t len) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev); + const u8 *seqp = data; + u8 cmd; + u8 cmdwritten; + int remain; + int chunk; + int ret; + + dev_info(dev, "DSI writing dcs seq: %*ph\n", (int)len, data); + + /* Pick out and skip past the DCS command */ + cmd = *seqp; + seqp++; + cmdwritten = 0; + remain = len - 1; + chunk = remain; + + /* Send max S6E63M0_DSI_MAX_CHUNK bytes at a time */ + if (chunk > S6E63M0_DSI_MAX_CHUNK) + chunk = S6E63M0_DSI_MAX_CHUNK; + ret = mipi_dsi_dcs_write(dsi, cmd, seqp, chunk); + if (ret < 0) { + dev_err(dev, "error sending DCS command seq cmd %02x\n", cmd); + return ret; + } + cmdwritten += chunk; + seqp += chunk; + + while (cmdwritten < remain) { + chunk = remain - cmdwritten; + if (chunk > S6E63M0_DSI_MAX_CHUNK) + chunk = S6E63M0_DSI_MAX_CHUNK; + ret = mipi_dsi_dcs_write(dsi, MCS_GLOBAL_PARAM, &cmdwritten, 1); + if (ret < 0) { + dev_err(dev, "error sending CMD %02x global param %02x\n", + cmd, cmdwritten); + return ret; + } + ret = mipi_dsi_dcs_write(dsi, cmd, seqp, chunk); + if (ret < 0) { + dev_err(dev, "error sending CMD %02x chunk\n", cmd); + return ret; + } + cmdwritten += chunk; + seqp += chunk; + } + dev_info(dev, "sent command %02x %02x bytes\n", cmd, cmdwritten); + + usleep_range(8000, 9000); + + return 0; +} + +static int s6e63m0_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + int ret; + + dsi->lanes = 2; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->hs_rate = 349440000; + dsi->lp_rate = 9600000; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_EOT_PACKET | + MIPI_DSI_MODE_VIDEO_BURST; + + ret = s6e63m0_probe(dev, s6e63m0_dsi_dcs_read, s6e63m0_dsi_dcs_write, + true); + if (ret) + return ret; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) + s6e63m0_remove(dev); + + return ret; +} + +static int s6e63m0_dsi_remove(struct mipi_dsi_device *dsi) +{ + mipi_dsi_detach(dsi); + return s6e63m0_remove(&dsi->dev); +} + +static const struct of_device_id s6e63m0_dsi_of_match[] = { + { .compatible = "samsung,s6e63m0" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, s6e63m0_dsi_of_match); + +static struct mipi_dsi_driver s6e63m0_dsi_driver = { + .probe = s6e63m0_dsi_probe, + .remove = s6e63m0_dsi_remove, + .driver = { + .name = "panel-samsung-s6e63m0", + .of_match_table = s6e63m0_dsi_of_match, + }, +}; +module_mipi_dsi_driver(s6e63m0_dsi_driver); + +MODULE_AUTHOR("Linus Walleij <linusw@kernel.org>"); +MODULE_DESCRIPTION("s6e63m0 LCD DSI Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c new file mode 100644 index 000000000000..d298d780220d --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/delay.h> + +#include <drm/drm_print.h> + +#include "panel-samsung-s6e63m0.h" + +#define DATA_MASK 0x100 + +static int s6e63m0_spi_dcs_read(struct device *dev, const u8 cmd, u8 *data) +{ + /* + * FIXME: implement reading DCS commands over SPI so we can + * properly identify which physical panel is connected. + */ + *data = 0; + + return 0; +} + +static int s6e63m0_spi_write_word(struct device *dev, u16 data) +{ + struct spi_device *spi = to_spi_device(dev); + struct spi_transfer xfer = { + .len = 2, + .tx_buf = &data, + }; + struct spi_message msg; + + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(spi, &msg); +} + +static int s6e63m0_spi_dcs_write(struct device *dev, const u8 *data, size_t len) +{ + int ret = 0; + + dev_dbg(dev, "SPI writing dcs seq: %*ph\n", (int)len, data); + ret = s6e63m0_spi_write_word(dev, *data); + + while (!ret && --len) { + ++data; + ret = s6e63m0_spi_write_word(dev, *data | DATA_MASK); + } + + if (ret) { + dev_err(dev, "SPI error %d writing dcs seq: %*ph\n", ret, + (int)len, data); + } + + usleep_range(300, 310); + + return ret; +} + +static int s6e63m0_spi_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + int ret; + + spi->bits_per_word = 9; + spi->mode = SPI_MODE_3; + ret = spi_setup(spi); + if (ret < 0) { + dev_err(dev, "spi setup failed.\n"); + return ret; + } + return s6e63m0_probe(dev, s6e63m0_spi_dcs_read, s6e63m0_spi_dcs_write, + false); +} + +static int s6e63m0_spi_remove(struct spi_device *spi) +{ + return s6e63m0_remove(&spi->dev); +} + +static const struct of_device_id s6e63m0_spi_of_match[] = { + { .compatible = "samsung,s6e63m0" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, s6e63m0_spi_of_match); + +static struct spi_driver s6e63m0_spi_driver = { + .probe = s6e63m0_spi_probe, + .remove = s6e63m0_spi_remove, + .driver = { + .name = "panel-samsung-s6e63m0", + .of_match_table = s6e63m0_spi_of_match, + }, +}; +module_spi_driver(s6e63m0_spi_driver); + +MODULE_AUTHOR("Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>"); +MODULE_DESCRIPTION("s6e63m0 LCD SPI Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c index 2cc772fdc456..3eee67e2d86a 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c @@ -16,25 +16,34 @@ #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/regulator/consumer.h> -#include <linux/spi/spi.h> #include <video/mipi_display.h> +#include "panel-samsung-s6e63m0.h" + /* Manufacturer Command Set */ #define MCS_ELVSS_ON 0xb1 #define MCS_MIECTL1 0xc0 #define MCS_BCMODE 0xc1 +#define MCS_ERROR_CHECK 0xd5 +#define MCS_READ_ID1 0xda +#define MCS_READ_ID2 0xdb +#define MCS_READ_ID3 0xdc +#define MCS_LEVEL_2_KEY 0xf0 +#define MCS_MTP_KEY 0xf1 #define MCS_DISCTL 0xf2 #define MCS_SRCCTL 0xf6 #define MCS_IFCTL 0xf7 #define MCS_PANELCTL 0xF8 #define MCS_PGAMMACTL 0xfa +#define S6E63M0_LCD_ID_VALUE_M2 0xA4 +#define S6E63M0_LCD_ID_VALUE_SM2 0xB4 +#define S6E63M0_LCD_ID_VALUE_SM2_1 0xB6 + #define NUM_GAMMA_LEVELS 11 #define GAMMA_TABLE_COUNT 23 -#define DATA_MASK 0x100 - #define MAX_BRIGHTNESS (NUM_GAMMA_LEVELS - 1) /* array of gamma tables for gamma value 2.2 */ @@ -87,8 +96,11 @@ static u8 const s6e63m0_gamma_22[NUM_GAMMA_LEVELS][GAMMA_TABLE_COUNT] = { struct s6e63m0 { struct device *dev; + int (*dcs_read)(struct device *dev, const u8 cmd, u8 *val); + int (*dcs_write)(struct device *dev, const u8 *data, size_t len); struct drm_panel panel; struct backlight_device *bl_dev; + u8 lcd_type; struct regulator_bulk_data supplies[2]; struct gpio_desc *reset_gpio; @@ -134,42 +146,20 @@ static int s6e63m0_clear_error(struct s6e63m0 *ctx) return ret; } -static int s6e63m0_spi_write_word(struct s6e63m0 *ctx, u16 data) +static void s6e63m0_dcs_read(struct s6e63m0 *ctx, const u8 cmd, u8 *data) { - struct spi_device *spi = to_spi_device(ctx->dev); - struct spi_transfer xfer = { - .len = 2, - .tx_buf = &data, - }; - struct spi_message msg; - - spi_message_init(&msg); - spi_message_add_tail(&xfer, &msg); + if (ctx->error < 0) + return; - return spi_sync(spi, &msg); + ctx->error = ctx->dcs_read(ctx->dev, cmd, data); } static void s6e63m0_dcs_write(struct s6e63m0 *ctx, const u8 *data, size_t len) { - int ret = 0; - if (ctx->error < 0 || len == 0) return; - dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data); - ret = s6e63m0_spi_write_word(ctx, *data); - - while (!ret && --len) { - ++data; - ret = s6e63m0_spi_write_word(ctx, *data | DATA_MASK); - } - - if (ret) { - dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, (int)len, data); - ctx->error = ret; - } - - usleep_range(300, 310); + ctx->error = ctx->dcs_write(ctx->dev, data, len); } #define s6e63m0_dcs_write_seq_static(ctx, seq ...) \ @@ -178,6 +168,43 @@ static void s6e63m0_dcs_write(struct s6e63m0 *ctx, const u8 *data, size_t len) s6e63m0_dcs_write(ctx, d, ARRAY_SIZE(d)); \ }) +static int s6e63m0_check_lcd_type(struct s6e63m0 *ctx) +{ + u8 id1, id2, id3; + int ret; + + s6e63m0_dcs_read(ctx, MCS_READ_ID1, &id1); + s6e63m0_dcs_read(ctx, MCS_READ_ID2, &id2); + s6e63m0_dcs_read(ctx, MCS_READ_ID3, &id3); + + ret = s6e63m0_clear_error(ctx); + if (ret) { + dev_err(ctx->dev, "error checking LCD type (%d)\n", ret); + ctx->lcd_type = 0x00; + return ret; + } + + dev_info(ctx->dev, "MTP ID: %02x %02x %02x\n", id1, id2, id3); + + /* We attempt to detect what panel is mounted on the controller */ + switch (id2) { + case S6E63M0_LCD_ID_VALUE_M2: + dev_info(ctx->dev, "detected LCD panel AMS397GE MIPI M2\n"); + break; + case S6E63M0_LCD_ID_VALUE_SM2: + case S6E63M0_LCD_ID_VALUE_SM2_1: + dev_info(ctx->dev, "detected LCD panel AMS397GE MIPI SM2\n"); + break; + default: + dev_info(ctx->dev, "unknown LCD panel type %02x\n", id2); + break; + } + + ctx->lcd_type = id2; + + return 0; +} + static void s6e63m0_init(struct s6e63m0 *ctx) { s6e63m0_dcs_write_seq_static(ctx, MCS_PANELCTL, @@ -249,8 +276,6 @@ static void s6e63m0_init(struct s6e63m0 *ctx) s6e63m0_dcs_write_seq_static(ctx, MCS_ELVSS_ON, 0x0b); - - s6e63m0_dcs_write_seq_static(ctx, MIPI_DCS_EXIT_SLEEP_MODE); } static int s6e63m0_power_on(struct s6e63m0 *ctx) @@ -263,6 +288,9 @@ static int s6e63m0_power_on(struct s6e63m0 *ctx) msleep(25); + /* Be sure to send a reset pulse */ + gpiod_set_value(ctx->reset_gpio, 1); + msleep(5); gpiod_set_value(ctx->reset_gpio, 0); msleep(120); @@ -292,8 +320,10 @@ static int s6e63m0_disable(struct drm_panel *panel) backlight_disable(ctx->bl_dev); + s6e63m0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_OFF); + msleep(10); s6e63m0_dcs_write_seq_static(ctx, MIPI_DCS_ENTER_SLEEP_MODE); - msleep(200); + msleep(120); ctx->enabled = false; @@ -331,6 +361,15 @@ static int s6e63m0_prepare(struct drm_panel *panel) if (ret < 0) return ret; + /* Magic to unlock level 2 control of the display */ + s6e63m0_dcs_write_seq_static(ctx, MCS_LEVEL_2_KEY, 0x5a, 0x5a); + /* Magic to unlock MTP reading */ + s6e63m0_dcs_write_seq_static(ctx, MCS_MTP_KEY, 0x5a, 0x5a); + + ret = s6e63m0_check_lcd_type(ctx); + if (ret < 0) + return ret; + s6e63m0_init(ctx); ret = s6e63m0_clear_error(ctx); @@ -350,7 +389,15 @@ static int s6e63m0_enable(struct drm_panel *panel) if (ctx->enabled) return 0; + s6e63m0_dcs_write_seq_static(ctx, MIPI_DCS_EXIT_SLEEP_MODE); + msleep(120); s6e63m0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_ON); + msleep(10); + + s6e63m0_dcs_write_seq_static(ctx, MCS_ERROR_CHECK, + 0xE7, 0x14, 0x60, 0x17, 0x0A, 0x49, 0xC3, + 0x8F, 0x19, 0x64, 0x91, 0x84, 0x76, 0x20, + 0x0F, 0x00); backlight_enable(ctx->bl_dev); @@ -429,9 +476,11 @@ static int s6e63m0_backlight_register(struct s6e63m0 *ctx) return ret; } -static int s6e63m0_probe(struct spi_device *spi) +int s6e63m0_probe(struct device *dev, + int (*dcs_read)(struct device *dev, const u8 cmd, u8 *val), + int (*dcs_write)(struct device *dev, const u8 *data, size_t len), + bool dsi_mode) { - struct device *dev = &spi->dev; struct s6e63m0 *ctx; int ret; @@ -439,7 +488,9 @@ static int s6e63m0_probe(struct spi_device *spi) if (!ctx) return -ENOMEM; - spi_set_drvdata(spi, ctx); + ctx->dcs_read = dcs_read; + ctx->dcs_write = dcs_write; + dev_set_drvdata(dev, ctx); ctx->dev = dev; ctx->enabled = false; @@ -460,15 +511,8 @@ static int s6e63m0_probe(struct spi_device *spi) return PTR_ERR(ctx->reset_gpio); } - spi->bits_per_word = 9; - spi->mode = SPI_MODE_3; - ret = spi_setup(spi); - if (ret < 0) { - dev_err(dev, "spi setup failed.\n"); - return ret; - } - drm_panel_init(&ctx->panel, dev, &s6e63m0_drm_funcs, + dsi_mode ? DRM_MODE_CONNECTOR_DSI : DRM_MODE_CONNECTOR_DPI); ret = s6e63m0_backlight_register(ctx); @@ -479,31 +523,17 @@ static int s6e63m0_probe(struct spi_device *spi) return 0; } +EXPORT_SYMBOL_GPL(s6e63m0_probe); -static int s6e63m0_remove(struct spi_device *spi) +int s6e63m0_remove(struct device *dev) { - struct s6e63m0 *ctx = spi_get_drvdata(spi); + struct s6e63m0 *ctx = dev_get_drvdata(dev); drm_panel_remove(&ctx->panel); return 0; } - -static const struct of_device_id s6e63m0_of_match[] = { - { .compatible = "samsung,s6e63m0" }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, s6e63m0_of_match); - -static struct spi_driver s6e63m0_driver = { - .probe = s6e63m0_probe, - .remove = s6e63m0_remove, - .driver = { - .name = "panel-samsung-s6e63m0", - .of_match_table = s6e63m0_of_match, - }, -}; -module_spi_driver(s6e63m0_driver); +EXPORT_SYMBOL_GPL(s6e63m0_remove); MODULE_AUTHOR("Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>"); MODULE_DESCRIPTION("s6e63m0 LCD Driver"); diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.h b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.h new file mode 100644 index 000000000000..c669fec91763 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _PANEL_SAMSUNG_S6E63M0_H +#define _PANEL_SAMSUNG_S6E63M0_H + +int s6e63m0_probe(struct device *dev, + int (*dcs_read)(struct device *dev, const u8 cmd, u8 *val), + int (*dcs_write)(struct device *dev, const u8 *data, + size_t len), + bool dsi_mode); +int s6e63m0_remove(struct device *dev); + +#endif /* _PANEL_SAMSUNG_S6E63M0_H */ |