[build] Rename gPXE to iPXE

Access to the gpxe.org and etherboot.org domains and associated
resources has been revoked by the registrant of the domain.  Work
around this problem by renaming project from gPXE to iPXE, and
updating URLs to match.

Also update README, LOG and COPYRIGHTS to remove obsolete information.

Signed-off-by: Michael Brown <mcb30@ipxe.org>

1 files changed, 24 insertions, 24 deletions

diff --git a/src/drivers/net/eepro100.c b/src/drivers/net/eepro100.c
index 3ad45bf22..add17a6d3 100644
--- a/src/drivers/net/eepro100.c
+++ b/src/drivers/net/eepro100.c
@@ -36,7 +36,7 @@
  *              Jul 25 1997  V1.00  REW     Tested by AW to work in a PROM
  *                                          Cleanup for publication
  *              Dez 11 2004  V1.10  Kiszka  Add RX ring buffer support
- *              Jun    2008  v2.0   mdeck   Updated to gPXE. Changed much.
+ *              Jun    2008  v2.0   mdeck   Updated to iPXE. Changed much.
  *
  * Cleanups and fixes by Thomas Miletich<thomas.miletich@gmail.com>
  *
@@ -60,12 +60,12 @@ FILE_LICENCE ( GPL2_OR_LATER );
  *
  * Initialization
  *
- * ifec_pci_probe() is called by gPXE during initialization. Typical NIC
+ * ifec_pci_probe() is called by iPXE during initialization. Typical NIC
  * initialization is performed.  EEPROM data is read.
  *
  * Network Boot
  *
- * ifec_net_open() is called by gPXE before attempting to network boot from the
+ * ifec_net_open() is called by iPXE before attempting to network boot from the
  * card.  Here, the Command Unit & Receive Unit are initialized.  The tx & rx
  * rings are setup.  The MAC address is programmed and the card is configured.
  *
@@ -104,16 +104,16 @@ FILE_LICENCE ( GPL2_OR_LATER );
 #include <errno.h>
 #include <stdio.h>
 #include <unistd.h>
-#include <gpxe/ethernet.h>
-#include <gpxe/if_ether.h>
-#include <gpxe/iobuf.h>
-#include <gpxe/malloc.h>
-#include <gpxe/pci.h>
-#include <gpxe/spi_bit.h>
-#include <gpxe/timer.h>
-#include <gpxe/nvs.h>
-#include <gpxe/threewire.h>
-#include <gpxe/netdevice.h>
+#include <ipxe/ethernet.h>
+#include <ipxe/if_ether.h>
+#include <ipxe/iobuf.h>
+#include <ipxe/malloc.h>
+#include <ipxe/pci.h>
+#include <ipxe/spi_bit.h>
+#include <ipxe/timer.h>
+#include <ipxe/nvs.h>
+#include <ipxe/threewire.h>
+#include <ipxe/netdevice.h>
 #include "eepro100.h"
 
 /****************************** Global data **********************************/
@@ -155,7 +155,7 @@ static struct net_device_operations ifec_operations = {
 	.irq      = ifec_net_irq
 };
 
-/******************* gPXE PCI Device Driver API functions ********************/
+/******************* iPXE PCI Device Driver API functions ********************/
 
 /*
  * Initialize the PCI device.
@@ -164,8 +164,8 @@ static struct net_device_operations ifec_operations = {
  * @v id  		The PCI device + vendor id.
  * @ret rc		Returns zero if successfully initialized.
  *
- * This function is called very early on, while gPXE is initializing.
- * This is a gPXE PCI Device Driver API function.
+ * This function is called very early on, while iPXE is initializing.
+ * This is a iPXE PCI Device Driver API function.
  */
 static int ifec_pci_probe ( struct pci_device *pci,
                             const struct pci_device_id *id __unused )
@@ -245,14 +245,14 @@ static void ifec_pci_remove ( struct pci_device *pci )
 	netdev_put        ( netdev );
 }
 
-/****************** gPXE Network Device Driver API functions *****************/
+/****************** iPXE Network Device Driver API functions *****************/
 
 /*
  * Close a network device.
  *
  * @v netdev		Device to close.
  *
- * This is a gPXE Network Device Driver API function.
+ * This is a iPXE Network Device Driver API function.
  */
 static void ifec_net_close ( struct net_device *netdev )
 {
@@ -285,7 +285,7 @@ static void ifec_net_close ( struct net_device *netdev )
  * @v netdev		Device to control.
  * @v enable		Zero to mask off IRQ, non-zero to enable IRQ.
  *
- * This is a gPXE Network Driver API function.
+ * This is a iPXE Network Driver API function.
  */
 static void ifec_net_irq ( struct net_device *netdev, int enable )
 {
@@ -304,7 +304,7 @@ static void ifec_net_irq ( struct net_device *netdev, int enable )
  * @ret rc  		Non-zero if failed to open.
  *
  * This enables tx and rx on the device.
- * This is a gPXE Network Device Driver API function.
+ * This is a iPXE Network Device Driver API function.
  */
 static int ifec_net_open ( struct net_device *netdev )
 {
@@ -393,9 +393,9 @@ error:
  *
  * @v netdev		Device being polled.
  *
- * This is called periodically by gPXE to let the driver check the status of
+ * This is called periodically by iPXE to let the driver check the status of
  * transmitted packets and to allow the driver to check for received packets.
- * This is a gPXE Network Device Driver API function.
+ * This is a iPXE Network Device Driver API function.
  */
 static void ifec_net_poll ( struct net_device *netdev )
 {
@@ -431,7 +431,7 @@ static void ifec_net_poll ( struct net_device *netdev )
  * @v iobuf 		Data to transmit.
  * @ret rc  		Non-zero if failed to transmit.
  *
- * This is a gPXE Network Driver API function.
+ * This is a iPXE Network Driver API function.
  */
 static int ifec_net_transmit ( struct net_device *netdev,
                                struct io_buffer *iobuf )
@@ -993,7 +993,7 @@ static void ifec_tx_process ( struct net_device *netdev )
 	/* Check status of transmitted packets */
 	while ( ( status = tcb->status ) && tcb->iob ) {
 		if ( status & TCB_U ) {
-			/* report error to gPXE */
+			/* report error to iPXE */
 			DBG ( "ifec_tx_process : tx error!\n " );
 			netdev_tx_complete_err ( netdev, tcb->iob, -EINVAL );
 		} else {