[aqc1xx] Add support for Marvell AQtion Ethernet controlleraqc1xx

This patch adds support for the AQtion Ethernet controller, enabling
iPXE to recognize and utilize the specific models (AQC114, AQC113, and
AQC107).

Tested-by: Animesh Bhatt <animeshb@marvell.com>
Signed-off-by: Animesh Bhatt <animeshb@marvell.com>

1 files changed, 83 insertions, 0 deletions

diff --git a/src/drivers/net/marvell/atl_hw.h b/src/drivers/net/marvell/atl_hw.h
new file mode 100644
index 000000000..efc9f86c1
--- /dev/null
+++ b/src/drivers/net/marvell/atl_hw.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright(C) 2017-2024 Marvell
+ *
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+
+ *  1. Redistributions of source code must retain the above copyright notice,
+ *     this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright notice,
+ *     this list of conditions and the following disclaimer in the documentation
+ *     and/or other materials provided with the distribution.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ *   TO,THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ *   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR HOLDER OR
+ *   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ *   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ *   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ *   OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ *   WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ *   OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *   EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __ATL_HW_H
+#define __ATL_HW_H
+
+FILE_LICENCE ( BSD2 );
+
+#define ATL_GLB_STD_CTRL 0x0
+#define ATL_GLB_CTRL_RST_DIS 0x4000
+#define ATL_FW_VER 0x18
+
+#define ATL_MPI_DAISY_CHAIN_STS 0x704
+#define ATL_MPI_RX_DAISY_CHAIN_DATA 0x04000000
+#define ATL_MPI_RX_DAISY_CHAIN_SOF  0x02000000
+#define FLB_LOAD_STS 0x10
+
+#define ATL_MPI_BOOT_EXIT_CODE 0x388
+
+#define ATL_SEM_TIMEOUT 0x348
+#define ATL_SEM_MAX_TIMEOUT 3000
+
+#define ATL_GLB_CTRL2 0x404
+#define ATL_GLB_MCP_SEM1 0x3A0
+#define ATL_GBL_MCP_SEM1_RELEASE 0x1
+
+#define ATL_GLB_MCP_SEM4 0x3AC
+#define ATL_GLB_MCP_SEM5 0x3B0
+#define ATL_GLB_MCP_SP26 0x364
+#define ATL_MIF_PWR_GATING_EN_CTRL 0x32A8
+
+#define ATL_GLB_NVR_PROV4       0x53C
+#define ATL_GBL_NVR_PROV4_RESET 0x10
+
+
+#define ATL_GEN_PROV9 0x520
+
+#define ATL_MAC_PHY_CTRL 0x00004000U
+#define ATL_MAC_PHY_CTRL_RST_DIS 0x20000000U
+
+#define ATL_MIF_PWR_GATING_EN_CTRL_RESET      0x0
+#define ATL_GEN_PROV9_ENABLE                  0x1
+#define ATL_GLB_CTRL2_MAC_KICK_START          0x180e0
+#define ATL_GLB_CTRL2_FW_RESET                0x80e0
+#define ATL_GLB_CTRL2_MBOX_ERR_UP_RUN_STALL   0x40e1
+#define ATL_GLB_CTRL2_MBOX_ERR_UP_RUN_NORMAL  0x40e0
+#define ATL_GLB_STD_CTRL_RESET                0x8000
+#define ATL_MPI_DAISY_CHAIN_STS_ERROR_STATUS  0x06000000
+
+#define ATL_DELAY_1_MNS   1
+#define ATL_DELAY_10_MNS  10
+#define ATL_DELAY_15_MNS  15
+#define ATL_DELAY_50_MNS  50
+
+#define ATL_MAC_ADDRESS_SIZE 6
+#define POISON_SIGN 0xDEAD
+#define FW_NOT_SUPPORT 0xF1A7
+
+#endif